https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
856deb8 Linux 5.9-rc5 13 September 2020, 23:06:00 UTC
5712c3e Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A collection of fixes I've been accruing over the last few weeks, none of them have been severe enough to warrant flushing the queue but it's been long enough now that it's a good idea to send them in. A handful of them are fixups for QSPI DT/bindings/compatibles, some smaller fixes for system DMA clock control and TMU interrupts on i.MX, a handful of fixes for OMAP, including a fix for DSI (display) on omap5" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits) arm64: dts: ns2: Fixed QSPI compatible string ARM: dts: BCM5301X: Fixed QSPI compatible string ARM: dts: NSP: Fixed QSPI compatible string ARM: dts: bcm: HR2: Fixed QSPI compatible string dt-bindings: spi: Fix spi-bcm-qspi compatible ordering ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3 arm64: dts: imx8mp: correct sdma1 clk setting arm64: dts: imx8mq: Fix TMU interrupt property ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phy ARM: dts: vfxxx: Add syscon compatible with OCOTP ARM: dts: imx6q-logicpd: Fix broken PWM arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build ARM: dts: imx6q-prtwd2: Remove unneeded i2c unit name ARM: dts: imx6qdl-gw51xx: Remove unneeded #address-cells/#size-cells ARM: dts: imx7ulp: Correct gpio ranges ARM: dts: ls1021a: fix QuadSPI-memory reg range arm64: defconfig: Enable ptn5150 extcon driver arm64: defconfig: Enable USB gadget with configfs ARM: configs: Update Integrator defconfig ARM: dts: omap5: Fix DSI base address and clocks ... 13 September 2020, 21:54:40 UTC
e4c26fa Merge tag 'usb-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt fixes from Greg KH: "Here are some small USB and Thunderbolt driver fixes for 5.9-rc5. Nothing huge, just a number of bugfixes and new device ids for problems reported: - new USB serial driver ids - bug fixes for syzbot reported problems - typec driver fixes - thunderbolt driver fixes - revert of reported broken commit All of these have been in linux-next with no reported issues" * tag 'usb-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes usb: typec: intel_pmc_mux: Do not configure Altmode HPD High usb: core: fix slab-out-of-bounds Read in read_descriptors Revert "usb: dwc3: meson-g12a: fix shared reset control use" usb: typec: ucsi: acpi: Check the _DEP dependencies usb: typec: intel_pmc_mux: Un-register the USB role switch usb: Fix out of sync data toggle if a configured device is reconfigured USB: serial: option: support dynamic Quectel USB compositions USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules thunderbolt: Use maximum USB3 link rate when reclaiming if link is not up thunderbolt: Disable ports that are not implemented USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter 13 September 2020, 16:23:54 UTC
6c7247f Merge tag 'staging-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver fixes from Greg KH: "Here are a number of staging and IIO driver fixes for 5.9-rc5. The majority of these are IIO driver fixes, to resolve a timestamp issue that was recently found to affect a bunch of IIO drivers. The other fixes in here are: - small IIO driver fixes - greybus driver fix - counter driver fix (came in through the IIO fixes tree) All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits) iio: adc: mcp3422: fix locking on error path iio: adc: mcp3422: fix locking scope iio: adc: meson-saradc: Use the parent device to look up the calib data iio:adc:max1118 Fix alignment of timestamp and data leak issues iio:adc:ina2xx Fix timestamp alignment issue. iio:adc:ti-adc084s021 Fix alignment and data leak issues. iio:adc:ti-adc081c Fix alignment and data leak issues iio:magnetometer:ak8975 Fix alignment and data leak issues. iio:light:ltr501 Fix timestamp alignment issue. iio:light:max44000 Fix timestamp alignment and prevent data leak. iio:chemical:ccs811: Fix timestamp alignment and prevent data leak. iio:proximity:mb1232: Fix timestamp alignment and prevent data leak. iio:accel:mma7455: Fix timestamp alignment and prevent data leak. iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak. iio:accel:mma8452: Fix timestamp alignment and prevent data leak. iio: accel: kxsd9: Fix alignment of local buffer. iio: adc: rockchip_saradc: select IIO_TRIGGERED_BUFFER iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set counter: microchip-tcb-capture: check the correct variable iio: cros_ec: Set Gyroscope default frequency to 25Hz ... 13 September 2020, 16:15:20 UTC
20a7b6b Merge tag 'driver-core-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some small driver core and debugfs fixes for 5.9-rc5 Included in here are: - firmware loader memory leak fix - firmware loader testing fixes for non-EFI systems - device link locking fixes found by lockdep - kobject_del() bugfix that has been affecting some callers - debugfs minor fix All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: test_firmware: Test platform fw loading on non-EFI systems PM: <linux/device.h>: fix @em_pd kernel-doc warning kobject: Drop unneeded conditional in __kobject_del() driver core: Fix device_pm_lock() locking for device links MAINTAINERS: Add the security document to SECURITY CONTACT driver code: print symbolic error code debugfs: Fix module state check condition kobject: Restore old behaviour of kobject_del(NULL) firmware_loader: fix memory leak for paged buffer 13 September 2020, 16:02:59 UTC
a4da411 Merge tag 'arm-soc/for-5.9/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.9, please pull the following: - Florian fixes the Broadcom QSPI controller binding such that the most specific compatible string is the left most one, and all existing in-tree users are updated as well. * tag 'arm-soc/for-5.9/devicetree-fixes' of https://github.com/Broadcom/stblinux: arm64: dts: ns2: Fixed QSPI compatible string ARM: dts: BCM5301X: Fixed QSPI compatible string ARM: dts: NSP: Fixed QSPI compatible string ARM: dts: bcm: HR2: Fixed QSPI compatible string dt-bindings: spi: Fix spi-bcm-qspi compatible ordering Link: https://lore.kernel.org/r/20200909211857.4144718-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net> 13 September 2020, 15:57:38 UTC
2aedcb0 Merge tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.9, round 2: - Fix the misspelling of 'interrupts' property in i.MX8MQ TMU DT node. - Correct 'ahb' clock for i.MX8MP SDMA1 in device tree. - Fix pad QSPI1B_SCLK mux mode for UART3 on i.MX6SX. * tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3 arm64: dts: imx8mp: correct sdma1 clk setting arm64: dts: imx8mq: Fix TMU interrupt property Link: https://lore.kernel.org/r/20200909143844.GA25109@dragon Signed-off-by: Olof Johansson <olof@lixom.net> 13 September 2020, 15:56:04 UTC
0e38402 Merge tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.9-rc cycle Few fixes for omap based devices: - Fix of_clk_get() error handling for omap-iommu - Fix missing audio pinctrl entries for logicpd boards - Fix video for logicpd-som-lv after switch to generic panels - Fix omap5 DSI clocks base * tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Fix DSI base address and clocks ARM: dts: logicpd-som-lv-baseboard: Fix missing video ARM: dts: logicpd-som-lv-baseboard: Fix broken audio ARM: dts: logicpd-torpedo-baseboard: Fix broken audio ARM: OMAP2+: Fix an IS_ERR() vs NULL check in _get_pwrdm() Link: https://lore.kernel.org/r/pull-1599132064-54898@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net> 13 September 2020, 15:54:02 UTC
2a1a4be Merge tag 'char-misc-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are a number of small driver fixes for 5.9-rc5 Included in here are: - habanalabs driver fixes - interconnect driver fixes - soundwire driver fixes - dyndbg fixes for reported issues, and then reverts to fix it all up to a sane state. - phy driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "dyndbg: accept query terms like file=bar and module=foo" Revert "dyndbg: fix problem parsing format="foo bar"" scripts/tags.sh: exclude tools directory from tags generation video: fbdev: fix OOB read in vga_8planes_imageblit() dyndbg: fix problem parsing format="foo bar" dyndbg: refine export, rename to dynamic_debug_exec_queries() dyndbg: give %3u width in pr-format, cosmetic only interconnect: qcom: Fix small BW votes being truncated to zero soundwire: fix double free of dangling pointer interconnect: Show bandwidth for disabled paths as zero in debugfs habanalabs: fix report of RAZWI initiator coordinates habanalabs: prevent user buff overflow phy: omap-usb2-phy: disable PHY charger detect phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init soundwire: bus: fix typo in comment on INTSTAT registers phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe() phy: qualcomm: fix platform_no_drv_owner.cocci warnings 13 September 2020, 15:52:21 UTC
84b1349 Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "A bit on the bigger side, mostly due to me being on vacation, then busy, then on parental leave, but there's nothing worrisome. ARM: - Multiple stolen time fixes, with a new capability to match x86 - Fix for hugetlbfs mappings when PUD and PMD are the same level - Fix for hugetlbfs mappings when PTE mappings are enforced (dirty logging, for example) - Fix tracing output of 64bit values x86: - nSVM state restore fixes - Async page fault fixes - Lots of small fixes everywhere" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits) KVM: emulator: more strict rsm checks. KVM: nSVM: more strict SMM checks when returning to nested guest SVM: nSVM: setup nested msr permission bitmap on nested state load SVM: nSVM: correctly restore GIF on vmexit from nesting after migration x86/kvm: don't forget to ACK async PF IRQ x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit KVM: SVM: avoid emulation with stale next_rip KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN KVM: SVM: Periodically schedule when unregistering regions on destroy KVM: MIPS: Change the definition of kvm type kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control KVM: fix memory leak in kvm_io_bus_unregister_dev() KVM: Check the allocation of pv cpu mask KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected KVM: arm64: Update page shift if stage 2 block mapping not supported KVM: arm64: Fix address truncation in traces KVM: arm64: Do not try to map PUDs when they are folded into PMD arm64/x86: KVM: Introduce steal-time cap ... 13 September 2020, 15:34:47 UTC
b952e97 Merge tag 'for-linus' of git://github.com/openrisc/linux Pull OpenRISC fixes from Stafford Horne: "Fixes for compile issues pointed out by kbuild and one bug I found in initrd with the 5.9 patches" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: Fix issue with get_user for 64-bit values openrisc: Fix cache API compile issue when not inlining openrisc: Reserve memblock for initrd 12 September 2020, 20:03:49 UTC
ef2e9a5 Merge tag 'seccomp-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp fixes from Kees Cook: "This fixes a rare race condition in seccomp when using TSYNC and USER_NOTIF together where a memory allocation would not get freed (found by syzkaller, fixed by Tycho). Additionally updates Tycho's MAINTAINERS and .mailmap entries for his new address" * tag 'seccomp-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: don't leave dangling ->notif if file allocation fails mailmap, MAINTAINERS: move to tycho.pizza seccomp: don't leak memory when filter install races 12 September 2020, 19:58:01 UTC
4f8b0a5 Merge tag 'libnvdimm-fix-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fix from Vishal Verma: "Fix detection of dax support for block devices. Previous fixes in this area, which only affected printing of debug messages, had an incorrect condition for detection of dax. This fix should finally do the right thing" * tag 'libnvdimm-fix-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: fix detection of dax support for non-persistent memory block devices 12 September 2020, 19:43:58 UTC
edf6b0e Merge tag 'for-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes: - regression fix for a crash after failed snapshot creation - one more lockep fix: use nofs allocation when allocating missing device - fix reloc tree leak on degraded mount - make some extent buffer alignment checks less strict to mount filesystems created by btrfs-convert" * tag 'for-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix NULL pointer dereference after failure to create snapshot btrfs: free data reloc tree on failed mount btrfs: require only sector size alignment for parent eb bytenr btrfs: fix lockdep splat in add_missing_dev 12 September 2020, 19:28:39 UTC
5a3c558 Merge tag '5.9-rc4-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fix from Steve French: "A fix for lookup on DFS link when cifsacl or modefromsid is used" * tag '5.9-rc4-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix DFS mount with cifsacl/modefromsid 12 September 2020, 18:48:04 UTC
37f66bb KVM: emulator: more strict rsm checks. Don't ignore return values in rsm_load_state_64/32 to avoid loading invalid state from SMM state area if it was tampered with by the guest. This is primarly intended to avoid letting guest set bits in EFER (like EFER.SVME when nesting is disabled) by manipulating SMM save area. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200827171145.374620-8-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 12 September 2020, 16:22:55 UTC
3ebb5d2 KVM: nSVM: more strict SMM checks when returning to nested guest * check that guest is 64 bit guest, otherwise the SVM related fields in the smm state area are not defined * If the SMM area indicates that SMM interrupted a running guest, check that EFER.SVME which is also saved in this area is set, otherwise the guest might have tampered with SMM save area, and so indicate emulation failure which should triple fault the guest. * Check that that guest CPUID supports SVM (due to the same issue as above) Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200827162720.278690-4-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 12 September 2020, 16:21:43 UTC
772b81b SVM: nSVM: setup nested msr permission bitmap on nested state load This code was missing and was forcing the L2 run with L1's msr permission bitmap Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200827162720.278690-3-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 12 September 2020, 16:20:53 UTC
9883764 SVM: nSVM: correctly restore GIF on vmexit from nesting after migration Currently code in svm_set_nested_state copies the current vmcb control area to L1 control area (hsave->control), under assumption that it mostly reflects the defaults that kvm choose, and later qemu overrides these defaults with L2 state using standard KVM interfaces, like KVM_SET_REGS. However nested GIF (which is AMD specific thing) is by default is true, and it is copied to hsave area as such. This alone is not a big deal since on VMexit, GIF is always set to false, regardless of what it was on VM entry. However in nested_svm_vmexit we were first were setting GIF to false, but then we overwrite the control fields with value from the hsave area. (including the nested GIF field itself if GIF virtualization is enabled). Now on normal vm entry this is not a problem, since GIF is usually false prior to normal vm entry, and this is the value that copied to hsave, and then restored, but this is not always the case when the nested state is loaded as explained above. To fix this issue, move svm_set_gif after we restore the L1 control state in nested_svm_vmexit, so that even with wrong GIF in the saved L1 control area, we still clear GIF as the spec says. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200827162720.278690-2-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 12 September 2020, 16:19:06 UTC
d877322 openrisc: Fix issue with get_user for 64-bit values A build failure was raised by kbuild with the following error. drivers/android/binder.c: Assembler messages: drivers/android/binder.c:3861: Error: unrecognized keyword/register name `l.lwz ?ap,4(r24)' drivers/android/binder.c:3866: Error: unrecognized keyword/register name `l.addi ?ap,r0,0' The issue is with 64-bit get_user() calls on openrisc. I traced this to a problem where in the internally in the get_user macros there is a cast to long __gu_val this causes GCC to think the get_user call is 32-bit. This binder code is really long and GCC allocates register r30, which triggers the issue. The 64-bit get_user asm tries to get the 64-bit pair register, which for r30 overflows the general register names and returns the dummy register ?ap. The fix here is to move the temporary variables into the asm macros. We use a 32-bit __gu_tmp for 32-bit and smaller macro and a 64-bit tmp in the 64-bit macro. The cast in the 64-bit macro has a trick of casting through __typeof__((x)-(x)) which avoids the below warning. This was barrowed from riscv. arch/openrisc/include/asm/uaccess.h:240:8: warning: cast to pointer from integer of different size I tested this in a small unit test to check reading between 64-bit and 32-bit pointers to 64-bit and 32-bit values in all combinations. Also I ran make C=1 to confirm no new sparse warnings came up. It all looks clean to me. Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/ Signed-off-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> 12 September 2020, 08:26:00 UTC
cc17b22 x86/kvm: don't forget to ACK async PF IRQ Merge commit 26d05b368a5c0 ("Merge branch 'kvm-async-pf-int' into HEAD") tried to adapt the new interrupt based async PF mechanism to the newly introduced IDTENTRY magic but unfortunately it missed the fact that DEFINE_IDTENTRY_SYSVEC() doesn't call ack_APIC_irq() on its own and all DEFINE_IDTENTRY_SYSVEC() users have to call it manually. As the result all multi-CPU KVM guest hang on boot when KVM_FEATURE_ASYNC_PF_INT is present. The breakage went unnoticed because no KVM userspace (e.g. QEMU) currently set it (and thus async PF mechanism is currently disabled) but we're about to change that. Fixes: 26d05b368a5c0 ("Merge branch 'kvm-async-pf-int' into HEAD") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200908135350.355053-3-vkuznets@redhat.com> Tested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 12 September 2020, 06:22:21 UTC
244081f x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro DEFINE_IDTENTRY_SYSVEC() already contains irqentry_enter()/ irqentry_exit(). Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200908135350.355053-2-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 12 September 2020, 06:22:07 UTC
99b82a1 KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit According to SDM 27.2.4, Event delivery causes an APIC-access VM exit. Don't report internal error and freeze guest when event delivery causes an APIC-access exit, it is handleable and the event will be re-injected during the next vmentry. Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1597827327-25055-2-git-send-email-wanpengli@tencent.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 12 September 2020, 06:21:17 UTC
e42c682 KVM: SVM: avoid emulation with stale next_rip svm->next_rip is reset in svm_vcpu_run() only after calling svm_exit_handlers_fastpath(), which will cause SVM's skip_emulated_instruction() to write a stale RIP. We can move svm_exit_handlers_fastpath towards the end of svm_vcpu_run(). To align VMX with SVM, keep svm_complete_interrupts() close as well. Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Paul K. <kronenpj@kronenpj.dyndns.org> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> [Also move vmcb_mark_all_clean before any possible write to the VMCB. - Paolo] 12 September 2020, 06:19:23 UTC
729e3d0 Merge tag 'ceph-for-5.9-rc5' of git://github.com/ceph/ceph-client Pull ceph fix from Ilya Dryomov: "Add missing capability checks in rbd, marked for stable" * tag 'ceph-for-5.9-rc5' of git://github.com/ceph/ceph-client: rbd: require global CAP_SYS_ADMIN for mapping and unmapping 11 September 2020, 20:47:29 UTC
e9287bd Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Usual driver bugfixes for the I2C subsystem" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: algo: pca: Reapply i2c bus settings after reset i2c: npcm7xx: Fix timeout calculation misc: eeprom: at24: register nvmem only after eeprom is ready to use 11 September 2020, 20:43:05 UTC
566e24e Merge tag 'pm-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix three pieces of documentation and add new CPU IDs to the Intel RAPL power capping driver. Specifics: - Add CPU IDs of the TigerLake Desktop, RocketLake and AlderLake chips to the Intel RAPL power capping driver (Zhang Rui). - Add the missing energy model performance domain item to the struct device kerneldoc comment (Randy Dunlap). - Fix the struct powercap_control_type kerneldoc comment to match the actual definition of that structure and add missing item to the struct powercap_zone_ops kerneldoc comment (Amit Kucheria)" * tag 'pm-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap: make documentation reflect code PM: <linux/device.h>: fix @em_pd kernel-doc warning powercap/intel_rapl: add support for AlderLake powercap/intel_rapl: add support for RocketLake powercap/intel_rapl: add support for TigerLake Desktop 11 September 2020, 18:59:14 UTC
7b8731d Merge tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - Fix a regression in bdev partition locking (Christoph) - NVMe pull request from Christoph: - cancel async events before freeing them (David Milburn) - revert a broken race fix (James Smart) - fix command processing during resets (Sagi Grimberg) - Fix a kyber crash with requeued flushes (Omar) - Fix __bio_try_merge_page() same_page error for no merging (Ritesh) * tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-block: block: Set same_page to false in __bio_try_merge_page if ret is false nvme-fabrics: allow to queue requests for live queues block: only call sched requeue_request() for scheduled requests nvme-tcp: cancel async events before freeing event struct nvme-rdma: cancel async events before freeing event struct nvme-fc: cancel async events before freeing event struct nvme: Revert: Fix controller creation races with teardown flow block: restore a specific error code in bdev_del_partition 11 September 2020, 18:55:28 UTC
e8878ab Merge tag 'spi-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "There's some driver specific fixes here plus one core fix for memory leaks that could be triggered by a potential race condition when cleaning up after we have split transfers to fit into what the controller can support" * tag 'spi-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: stm32: fix pm_runtime_get_sync() error checking spi: Fix memory leak on splited transfers spi: spi-cadence-quadspi: Fix mapping of buffers for DMA reads spi: stm32: Rate-limit the 'Communication suspended' message spi: spi-loopback-test: Fix out-of-bounds read spi: spi-cadence-quadspi: Populate get_name() interface MAINTAINERS: add myself as maintainer for spi-fsl-dspi driver 11 September 2020, 18:35:55 UTC
8b6ce25 Merge tag 'regulator-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "The biggest set of fixes here is those from Michał Mirosław fixing some locking issues with coupled regulators that are triggered in cases where a coupled regulator is used by a device involved in fs_reclaim like eMMC storage. These are relatively serious for the affected systems, though the circumstances where they trigger are very rare" * tag 'regulator-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: pwm: Fix machine constraints application regulator: core: Fix slab-out-of-bounds in regulator_unlock_recursive() regulator: remove superfluous lock in regulator_resolve_coupling() regulator: cleanup regulator_ena_gpio_free() regulator: plug of_node leak in regulator_register()'s error path regulator: push allocation in set_consumer_device_supply() out of lock regulator: push allocations in create_regulator() outside of lock regulator: push allocation in regulator_ena_gpio_request() out of lock regulator: push allocation in regulator_init_coupling() outside of lock regulator: fix spelling mistake "Cant" -> "Can't" regulator: cros-ec-regulator: Add NULL test for devm_kmemdup call 11 September 2020, 18:25:55 UTC
d831de1 KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN Even without in-kernel LAPIC we should allow writing '0' to MSR_KVM_ASYNC_PF_EN as we're not enabling the mechanism. In particular, QEMU with 'kernel-irqchip=off' fails to start a guest with qemu-system-x86_64: error: failed to set MSR 0x4b564d02 to 0x0 Fixes: 9d3c447c72fb2 ("KVM: X86: Fix async pf caused null-ptr-deref") Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200911093147.484565-1-vkuznets@redhat.com> [Actually commit the version proposed by Sean Christopherson. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 11 September 2020, 17:26:47 UTC
7be7494 KVM: SVM: Periodically schedule when unregistering regions on destroy There may be many encrypted regions that need to be unregistered when a SEV VM is destroyed. This can lead to soft lockups. For example, on a host running 4.15: watchdog: BUG: soft lockup - CPU#206 stuck for 11s! [t_virtual_machi:194348] CPU: 206 PID: 194348 Comm: t_virtual_machi RIP: 0010:free_unref_page_list+0x105/0x170 ... Call Trace: [<0>] release_pages+0x159/0x3d0 [<0>] sev_unpin_memory+0x2c/0x50 [kvm_amd] [<0>] __unregister_enc_region_locked+0x2f/0x70 [kvm_amd] [<0>] svm_vm_destroy+0xa9/0x200 [kvm_amd] [<0>] kvm_arch_destroy_vm+0x47/0x200 [<0>] kvm_put_kvm+0x1a8/0x2f0 [<0>] kvm_vm_release+0x25/0x30 [<0>] do_exit+0x335/0xc10 [<0>] do_group_exit+0x3f/0xa0 [<0>] get_signal+0x1bc/0x670 [<0>] do_signal+0x31/0x130 Although the CLFLUSH is no longer issued on every encrypted region to be unregistered, there are no other changes that can prevent soft lockups for very large SEV VMs in the latest kernel. Periodically schedule if necessary. This still holds kvm->lock across the resched, but since this only happens when the VM is destroyed this is assumed to be acceptable. Signed-off-by: David Rientjes <rientjes@google.com> Message-Id: <alpine.DEB.2.23.453.2008251255240.2987727@chino.kir.corp.google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 11 September 2020, 17:24:15 UTC
15e9e35 KVM: MIPS: Change the definition of kvm type MIPS defines two kvm types: #define KVM_VM_MIPS_TE 0 #define KVM_VM_MIPS_VZ 1 In Documentation/virt/kvm/api.rst it is said that "You probably want to use 0 as machine type", which implies that type 0 be the "automatic" or "default" type. And, in user-space libvirt use the null-machine (with type 0) to detect the kvm capability, which returns "KVM not supported" on a VZ platform. I try to fix it in QEMU but it is ugly: https://lists.nongnu.org/archive/html/qemu-devel/2020-08/msg05629.html And Thomas Huth suggests me to change the definition of kvm type: https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03281.html So I define like this: #define KVM_VM_MIPS_AUTO 0 #define KVM_VM_MIPS_VZ 1 #define KVM_VM_MIPS_TE 2 Since VZ and TE cannot co-exists, using type 0 on a TE platform will still return success (so old user-space tools have no problems on new kernels); the advantage is that using type 0 on a VZ platform will not return failure. So, the only problem is "new user-space tools use type 2 on old kernels", but if we treat this as a kernel bug, we can backport this patch to old stable kernels. Signed-off-by: Huacai Chen <chenhc@lemote.com> Message-Id: <1599734031-28746-1-git-send-email-chenhc@lemote.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 11 September 2020, 17:22:52 UTC
063d6a4 Merge tag 'mmc-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - sdio: Restore ~20% performance drop for SDHCI drivers, by using mmc_pre_req() and mmc_post_req() for SDIO requests. MMC host: - sdhci-of-esdhc: Fix support for erratum eSDHC7 - mmc_spi: Allow the driver to be built when CONFIG_HAS_DMA is unset - sdhci-msm: Use retries to fix tuning - sdhci-acpi: Fix resume for eMMC HS400 mode" * tag 'mmc-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdio: Use mmc_pre_req() / mmc_post_req() mmc: sdhci-of-esdhc: Don't walk device-tree on every interrupt mmc: mmc_spi: Allow the driver to be built when CONFIG_HAS_DMA is unset mmc: sdhci-msm: Add retries when all tuning phases are found valid mmc: sdhci-acpi: Clear amd_sdhci_host on reset 11 September 2020, 17:19:27 UTC
f6f6195 kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed When kvm_mmu_get_page() gets a page with unsynced children, the spt pagetable is unsynchronized with the guest pagetable. But the guest might not issue a "flush" operation on it when the pagetable entry is changed from zero or other cases. The hypervisor has the responsibility to synchronize the pagetables. KVM behaved as above for many years, But commit 8c8560b83390 ("KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes") inadvertently included a line of code to change it without giving any reason in the changelog. It is clear that the commit's intention was to change KVM_REQ_TLB_FLUSH -> KVM_REQ_TLB_FLUSH_CURRENT, so we don't needlessly flush other contexts; however, one of the hunks changed a nearby KVM_REQ_MMU_SYNC instead. This patch changes it back. Link: https://lore.kernel.org/lkml/20200320212833.3507-26-sean.j.christopherson@intel.com/ Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20200902135421.31158-1-jiangshanlai@gmail.com> fixes: 8c8560b83390 ("KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes") Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 11 September 2020, 17:16:55 UTC
c6b177a KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control A minor fix for the update of VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL field in exit_ctls_high. Fixes: 03a8871add95 ("KVM: nVMX: Expose load IA32_PERF_GLOBAL_CTRL VM-{Entry,Exit} control") Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20200828085622.8365-5-chenyi.qiang@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 11 September 2020, 17:15:12 UTC
f658866 KVM: fix memory leak in kvm_io_bus_unregister_dev() when kmalloc() fails in kvm_io_bus_unregister_dev(), before removing the bus, we should iterate over all other devices linked to it and call kvm_iodevice_destructor() for them Fixes: 90db10434b16 ("KVM: kvm_io_bus_unregister_dev() should never fail") Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+f196caa45793d6374707@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=f196caa45793d6374707 Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200907185535.233114-1-rkovhaev@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 11 September 2020, 17:15:11 UTC
0f99022 KVM: Check the allocation of pv cpu mask check the allocation of per-cpu __pv_cpu_mask. Initialize ops only when successful. Signed-off-by: Haiwei Li <lihaiwei@tencent.com> Message-Id: <d59f05df-e6d3-3d31-a036-cc25a2b2f33f@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 11 September 2020, 17:15:10 UTC
43fea4e KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected When L2 uses PAE, L0 intercepts of L2 writes to CR0/CR3/CR4 call load_pdptrs to read the possibly updated PDPTEs from the guest physical address referenced by CR3. It loads them into vcpu->arch.walk_mmu->pdptrs and sets VCPU_EXREG_PDPTR in vcpu->arch.regs_dirty. At the subsequent assumed reentry into L2, the mmu will call vmx_load_mmu_pgd which calls ept_load_pdptrs. ept_load_pdptrs sees VCPU_EXREG_PDPTR set in vcpu->arch.regs_dirty and loads VMCS02.GUEST_PDPTRn from vcpu->arch.walk_mmu->pdptrs[]. This all works if the L2 CRn write intercept always resumes L2. The resume path calls vmx_check_nested_events which checks for exceptions, MTF, and expired VMX preemption timers. If vmx_check_nested_events finds any of these conditions pending it will reflect the corresponding exit into L1. Live migration at this point would also cause a missed immediate reentry into L2. After L1 exits, vmx_vcpu_run calls vmx_register_cache_reset which clears VCPU_EXREG_PDPTR in vcpu->arch.regs_dirty. When L2 next resumes, ept_load_pdptrs finds VCPU_EXREG_PDPTR clear in vcpu->arch.regs_dirty and does not load VMCS02.GUEST_PDPTRn from vcpu->arch.walk_mmu->pdptrs[]. prepare_vmcs02 will then load VMCS02.GUEST_PDPTRn from vmcs12->pdptr0/1/2/3 which contain the stale values stored at last L2 exit. A repro of this bug showed L2 entering triple fault immediately due to the bad VMCS02.GUEST_PDPTRn values. When L2 is in PAE paging mode add a call to ept_load_pdptrs before leaving L2. This will update VMCS02.GUEST_PDPTRn if they are dirty in vcpu->arch.walk_mmu->pdptrs[]. Tested: kvm-unit-tests with new directed test: vmx_mtf_pdpte_test. Verified that test fails without the fix. Also ran Google internal VMM with an Ubuntu 16.04 4.4.0-83 guest running a custom hypervisor with a 32-bit Windows XP L2 guest using PAE. Prior to fix would repro readily. Ran 14 simultaneous L2s for 140 iterations with no failures. Signed-off-by: Peter Shier <pshier@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <20200820230545.2411347-1-pshier@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 11 September 2020, 17:15:09 UTC
1b67fd0 Merge tag 'kvmarm-fixes-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for Linux 5.9, take #1 - Multiple stolen time fixes, with a new capability to match x86 - Fix for hugetlbfs mappings when PUD and PMD are the same level - Fix for hugetlbfs mappings when PTE mappings are enforced (dirty logging, for example) - Fix tracing output of 64bit values 11 September 2020, 17:12:11 UTC
d67f2ec Merge tag 'drm-fixes-2020-09-11' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Regular fixes, not much a major amount. One thing though is Laurent fixed some Kconfig issues, and I'm carrying the rapidio kconfig change so the drm one for xlnx driver works. He hadn't got a response from rapidio maintainers. Otherwise, virtio, sun4i, tve200, ingenic have some fixes, one audio fix for i915 and a core docs fix. kconfig: - rapidio/xlnx kconfig fix core: - Documentation fix i915: - audio regression fix virtio: - Fix double free in virtio - Fix virtio unblank - Remove output->enabled from virtio, as it should use crtc_state sun4i: - Add missing put_device in sun4i, and other fixes - Handle sun4i alpha on lowest plane correctly tv200: - Fix tve200 enable/disable ingenic - Small ingenic fixes" * tag 'drm-fixes-2020-09-11' of git://anongit.freedesktop.org/drm/drm: drm/i915: fix regression leading to display audio probe failure on GLK drm: xlnx: dpsub: Fix DMADEVICES Kconfig dependency rapidio: Replace 'select' DMAENGINES 'with depends on' drm/virtio: drop virtio_gpu_output->enabled drm/sun4i: backend: Disable alpha on the lowest plane on the A20 drm/sun4i: backend: Support alpha property on lowest plane drm/sun4i: Fix DE2 YVU handling drm/tve200: Stabilize enable/disable dma-buf: fence-chain: Document missing dma_fence_chain_init() parameter in kerneldoc dma-buf: Fix kerneldoc of dma_buf_set_name() drm/virtio: fix unblank Documentation: fix dma-buf.rst underline length warning drm/sun4i: Fix dsi dcs long write function drm/ingenic: Fix driver not probing when IPU port is missing drm/ingenic: Fix leak of device_node pointer drm/sun4i: add missing put_device() call in sun8i_r40_tcon_tv_set_mux() drm/virtio: Revert "drm/virtio: Call the right shmem helpers" 11 September 2020, 17:10:27 UTC
b1df2a0 Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma fixes from Jason Gunthorpe: "A number of driver bug fixes and a few recent regressions: - Several bug fixes for bnxt_re. Crashing, incorrect data reported, and corruption on new HW - Memory leak and crash in rxe - Fix sysfs corruption in rxe if the netdev name is too long - Fix a crash on error unwind in the new cq_pool code - Fix kobject panics in rtrs by working device lifetime properly - Fix a data corruption bug in iser target related to misaligned buffers" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/isert: Fix unaligned immediate-data handling RDMA/rtrs-srv: Set .release function for rtrs srv device during device init RDMA/bnxt_re: Remove set but not used variable 'qplib_ctx' RDMA/core: Fix reported speed and width RDMA/core: Fix unsafe linked list traversal after failing to allocate CQ RDMA/bnxt_re: Remove the qp from list only if the qp destroy succeeds RDMA/bnxt_re: Fix driver crash on unaligned PSN entry address RDMA/bnxt_re: Restrict the max_gids to 256 RDMA/bnxt_re: Static NQ depth allocation RDMA/bnxt_re: Fix the qp table indexing RDMA/bnxt_re: Do not report transparent vlan from QP1 RDMA/mlx4: Read pkey table length instead of hardcoded value RDMA/rxe: Fix panic when calling kmem_cache_create() RDMA/rxe: Fix memleak in rxe_mem_init_user RDMA/rxe: Fix the parent sysfs read when the interface has 15 chars RDMA/rtrs-srv: Replace device_register with device_initialize and device_add 11 September 2020, 17:02:36 UTC
40249c6 gcov: add support for GCC 10.1 Using gcov to collect coverage data for kernels compiled with GCC 10.1 causes random malfunctions and kernel crashes. This is the result of a changed GCOV_COUNTERS value in GCC 10.1 that causes a mismatch between the layout of the gcov_info structure created by GCC profiling code and the related structure used by the kernel. Fix this by updating the in-kernel GCOV_COUNTERS value. Also re-enable config GCOV_KERNEL for use with GCC 10. Reported-by: Colin Ian King <colin.king@canonical.com> Reported-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Tested-by: Leon Romanovsky <leonro@nvidia.com> Tested-and-Acked-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 11 September 2020, 16:33:54 UTC
d64e690 Merge branch 'powercap' * powercap: powercap: make documentation reflect code powercap/intel_rapl: add support for AlderLake powercap/intel_rapl: add support for RocketLake powercap/intel_rapl: add support for TigerLake Desktop 11 September 2020, 14:46:01 UTC
7f7a479 Merge tag 'drm-misc-fixes-2020-09-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.9-rc5: - Fix double free in virtio. - Add missing put_device in sun4i, and other fixes. - Small ingenic fixes. - Handle sun4i alpha on lowest plane correctly. - Remove output->enabled from virtio, as it should use crtc_state. - Fix tve200 enable/disable. - Documentation fix. - Fix virtio unblank. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/478b49d1-b1b3-c983-7056-8a89249be435@mblankhorst.nl 10 September 2020, 23:49:23 UTC
7bf23bf Merge tag 'drm-intel-fixes-2020-09-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.9-rc5: - Fix regression leading to audio probe failure Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/875z8m2hss.fsf@intel.com 10 September 2020, 23:45:51 UTC
581cb3a Merge tag 'f2fs-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs fixes from Jaegeuk Kim: "Small bug fixes for: - SMR drive fix - infinite loop when building free node ids - EOF at DIO read" * tag 'f2fs-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: Return EOF on unaligned end of file DIO read f2fs: fix indefinite loop scanning for free nid f2fs: Fix type of section block count variables 10 September 2020, 20:12:46 UTC
cc88b78 powercap: make documentation reflect code Fix up the documentation of the struct powercap_control_type members to match the code. Also fixup stray whitespace. Signed-off-by: Amit Kucheria <amitk@kernel.org> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 10 September 2020, 17:27:59 UTC
95035ea PM: <linux/device.h>: fix @em_pd kernel-doc warning Fix kernel-doc warning in <linux/device.h>: ../include/linux/device.h:613: warning: Function parameter or member 'em_pd' not described in 'device' Fixes: 1bc138c62295 ("PM / EM: add support for other devices than CPUs in Energy Model") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 10 September 2020, 17:19:42 UTC
ba92a42 powercap/intel_rapl: add support for AlderLake Add intel_rapl support for the AlderLake platform. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 10 September 2020, 17:17:29 UTC
64e5f36 powercap/intel_rapl: add support for RocketLake Add intel_rapl support for the RocketLake platform. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 10 September 2020, 17:17:29 UTC
57a2fb0 powercap/intel_rapl: add support for TigerLake Desktop Add intel_rapl support for the TigerLake desktop platform. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 10 September 2020, 17:17:29 UTC
952e934 Revert "dyndbg: accept query terms like file=bar and module=foo" This reverts commit 14775b04964264189caa4a0862eac05dab8c0502 as there were still some parsing problems with it, and the follow-on patch for it. Let's revisit it later, just drop it for now. Cc: <jbaron@akamai.com> Cc: Jim Cromie <jim.cromie@gmail.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 14775b049642 ("dyndbg: accept query terms like file=bar and module=foo") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 10 September 2020, 16:45:03 UTC
7f6e1f3 Revert "dyndbg: fix problem parsing format="foo bar"" This reverts commit 42f07816ac0cc797928119cc039c414ae2b95d34 as it still causes problems. It will be resolved later, let's revert it so we can also revert the original patch this was supposed to be helping with. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: 42f07816ac0c ("dyndbg: fix problem parsing format="foo bar"") Cc: Jim Cromie <jim.cromie@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 10 September 2020, 16:42:38 UTC
baaabec test_firmware: Test platform fw loading on non-EFI systems On non-EFI systems, it wasn't possible to test the platform firmware loader because it will have never set "checked_fw" during __init. Instead, allow the test code to override this check. Additionally split the declarations into a private symbol namespace so there is greater enforcement of the symbol visibility. Fixes: 548193cba2a7 ("test_firmware: add support for firmware_request_platform") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20200909225354.3118328-1-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 10 September 2020, 16:19:16 UTC
fd04358 Merge tag 'nvme-5.9-2020-09-10' of git://git.infradead.org/nvme into block-5.9 Pull NVMe fixes from Christoph. "nvme fixes for 5.9 - cancel async events before freeing them (David Milburn) - revert a broken race fix (James Smart) - fix command processing during resets (Sagi Grimberg)" * tag 'nvme-5.9-2020-09-10' of git://git.infradead.org/nvme: nvme-fabrics: allow to queue requests for live queues nvme-tcp: cancel async events before freeing event struct nvme-rdma: cancel async events before freeing event struct nvme-fc: cancel async events before freeing event struct nvme: Revert: Fix controller creation races with teardown flow 10 September 2020, 13:12:22 UTC
7fe1009 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a regression in padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: padata: fix possible padata_works_lock deadlock 10 September 2020, 02:46:22 UTC
686e0a0 arm64: dts: ns2: Fixed QSPI compatible string The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: ff73917d38a6 ("ARM64: dts: Add QSPI Device Tree node for NS2") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> 09 September 2020, 21:14:06 UTC
b793dab ARM: dts: BCM5301X: Fixed QSPI compatible string The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 1c8f40650723 ("ARM: dts: BCM5301X: convert to iProc QSPI") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> 09 September 2020, 21:14:06 UTC
d1ecc40 ARM: dts: NSP: Fixed QSPI compatible string The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 329f98c1974e ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> 09 September 2020, 21:14:06 UTC
d663186 ARM: dts: bcm: HR2: Fixed QSPI compatible string The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> 09 September 2020, 21:14:06 UTC
fcd2e4b dt-bindings: spi: Fix spi-bcm-qspi compatible ordering The binding is currently incorrectly defining the compatible strings from least specifice to most specific instead of the converse. Re-order them from most specific (left) to least specific (right) and fix the examples as well. Fixes: 5fc78f4c842a ("spi: Broadcom BRCMSTB, NSP, NS2 SoC bindings") Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> 09 September 2020, 21:13:40 UTC
ab29a80 Merge tag 'nfs-for-5.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfixes from Trond Myklebust: - Fix an NFS/RDMA resource leak - Fix the error handling during delegation recall - NFSv4.0 needs to return the delegation on a zero-stateid SETATTR - Stop printk reading past end of string * tag 'nfs-for-5.9-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: stop printk reading past end of string NFS: Zero-stateid SETATTR should first return delegation NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall xprtrdma: Release in-flight MRs on disconnect 09 September 2020, 18:14:20 UTC
0b089c1 IB/isert: Fix unaligned immediate-data handling Currently we allocate rx buffers in a single contiguous buffers for headers (iser and iscsi) and data trailer. This means that most likely the data starting offset is aligned to 76 bytes (size of both headers). This worked fine for years, but at some point this broke, resulting in data corruptions in isert when a command comes with immediate data and the underlying backend device assumes 512 bytes buffer alignment. We assume a hard-requirement for all direct I/O buffers to be 512 bytes aligned. To fix this, we should avoid passing unaligned buffers for I/O. Instead, we allocate our recv buffers with some extra space such that we can have the data portion align to 512 byte boundary. This also means that we cannot reference headers or data using structure but rather accessors (as they may move based on alignment). Also, get rid of the wrong __packed annotation from iser_rx_desc as this has only harmful effects (not aligned to anything). This affects the rx descriptors for iscsi login and data plane. Fixes: 3d75ca0adef4 ("block: introduce multi-page bvec helpers") Link: https://lore.kernel.org/r/20200904195039.31687-1-sagi@grimberg.me Reported-by: Stephen Rust <srust@blockbridge.com> Tested-by: Doug Dumitru <doug@dumitru.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> 09 September 2020, 16:46:03 UTC
39c2d63 RDMA/rtrs-srv: Set .release function for rtrs srv device during device init The device .release function was not being set during the device initialization. This was leading to the below warning, in error cases when put_srv was called before device_add was called. Warning: Device '(null)' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt. So, set the device .release function during device initialization in the __alloc_srv() function. Fixes: baa5b28b7a47 ("RDMA/rtrs-srv: Replace device_register with device_initialize and device_add") Link: https://lore.kernel.org/r/20200907102216.104041-1-haris.iqbal@cloud.ionos.com Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> 09 September 2020, 16:28:14 UTC
9e71244 RDMA/bnxt_re: Remove set but not used variable 'qplib_ctx' drivers/infiniband/hw/bnxt_re/main.c:1012:25: warning: variable ‘qplib_ctx’ set but not used [-Wunused-but-set-variable] Fixes: f86b31c6a28f ("RDMA/bnxt_re: Static NQ depth allocation") Link: https://lore.kernel.org/r/20200905121624.32776-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> 09 September 2020, 16:20:48 UTC
2cd896a block: Set same_page to false in __bio_try_merge_page if ret is false If we hit the UINT_MAX limit of bio->bi_iter.bi_size and so we are anyway not merging this page in this bio, then it make sense to make same_page also as false before returning. Without this patch, we hit below WARNING in iomap. This mostly happens with very large memory system and / or after tweaking vm dirty threshold params to delay writeback of dirty data. WARNING: CPU: 18 PID: 5130 at fs/iomap/buffered-io.c:74 iomap_page_release+0x120/0x150 CPU: 18 PID: 5130 Comm: fio Kdump: loaded Tainted: G W 5.8.0-rc3 #6 Call Trace: __remove_mapping+0x154/0x320 (unreliable) iomap_releasepage+0x80/0x180 try_to_release_page+0x94/0xe0 invalidate_inode_page+0xc8/0x110 invalidate_mapping_pages+0x1dc/0x540 generic_fadvise+0x3c8/0x450 xfs_file_fadvise+0x2c/0xe0 [xfs] vfs_fadvise+0x3c/0x60 ksys_fadvise64_64+0x68/0xe0 sys_fadvise64+0x28/0x40 system_call_exception+0xf8/0x1c0 system_call_common+0xf0/0x278 Fixes: cc90bc68422 ("block: fix "check bi_size overflow before merge"") Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 09 September 2020, 14:18:45 UTC
c170a5a spi: stm32: fix pm_runtime_get_sync() error checking The pm_runtime_get_sync() can return either 0 or 1 on success but this code treats 1 as a failure. Fixes: db96bf976a4f ("spi: stm32: fixes suspend/resume management") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Link: https://lore.kernel.org/r/20200909094304.GA420136@mwanda Signed-off-by: Mark Brown <broonie@kernel.org> 09 September 2020, 14:11:44 UTC
b59a7ca spi: Fix memory leak on splited transfers In the prepare_message callback the bus driver has the opportunity to split a transfer into smaller chunks. spi_map_msg is done after prepare_message. Function spi_res_release releases the splited transfers in the message. Therefore spi_res_release should be called after spi_map_msg. The previous try at this was commit c9ba7a16d0f1 which released the splited transfers after spi_finalize_current_message had been called. This introduced a race since the message struct could be out of scope because the spi_sync call got completed. Fixes this leak on spi bus driver spi-bcm2835.c when transfer size is greater than 65532: Kmemleak: sg_alloc_table+0x28/0xc8 spi_map_buf+0xa4/0x300 __spi_pump_messages+0x370/0x748 __spi_sync+0x1d4/0x270 spi_sync+0x34/0x58 spi_test_execute_msg+0x60/0x340 [spi_loopback_test] spi_test_run_iter+0x548/0x578 [spi_loopback_test] spi_test_run_test+0x94/0x140 [spi_loopback_test] spi_test_run_tests+0x150/0x180 [spi_loopback_test] spi_loopback_test_probe+0x50/0xd0 [spi_loopback_test] spi_drv_probe+0x84/0xe0 Signed-off-by: Gustav Wiklander <gustavwi@axis.com> Link: https://lore.kernel.org/r/20200908151129.15915-1-gustav.wiklander@axis.com Signed-off-by: Mark Brown <broonie@kernel.org> 09 September 2020, 14:11:43 UTC
0a355ae i2c: algo: pca: Reapply i2c bus settings after reset If something goes wrong (such as the SCL being stuck low) then we need to reset the PCA chip. The issue with this is that on reset we lose all config settings and the chip ends up in a disabled state which results in a lock up/high CPU usage. We need to re-apply any configuration that had previously been set and re-enable the chip. Signed-off-by: Evan Nimmo <evan.nimmo@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> 09 September 2020, 08:22:40 UTC
0065ec0 Merge tag 'at24-fixes-for-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current at24 fixes for v5.9-rc5 - delay registration of the nvmem provider until after power is enabled 09 September 2020, 08:17:08 UTC
73a5379 nvme-fabrics: allow to queue requests for live queues Right now we are failing requests based on the controller state (which is checked inline in nvmf_check_ready) however we should definitely accept requests if the queue is live. When entering controller reset, we transition the controller into NVME_CTRL_RESETTING, and then return BLK_STS_RESOURCE for non-mpath requests (have blk_noretry_request set). This is also the case for NVME_REQ_USER for the wrong reason. There shouldn't be any reason for us to reject this I/O in a controller reset. We do want to prevent passthru commands on the admin queue because we need the controller to fully initialize first before we let user passthru admin commands to be issued. In a non-mpath setup, this means that the requests will simply be requeued over and over forever not allowing the q_usage_counter to drop its final reference, causing controller reset to hang if running concurrently with heavy I/O. Fixes: 35897b920c8a ("nvme-fabrics: fix and refine state checks in __nvmf_check_ready") Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> 09 September 2020, 06:00:50 UTC
20d0a10 f2fs: Return EOF on unaligned end of file DIO read Reading past end of file returns EOF for aligned reads but -EINVAL for unaligned reads on f2fs. While documentation is not strict about this corner case, most filesystem returns EOF on this case, like iomap filesystems. This patch consolidates the behavior for f2fs, by making it return EOF(0). it can be verified by a read loop on a file that does a partial read before EOF (A file that doesn't end at an aligned address). The following code fails on an unaligned file on f2fs, but not on btrfs, ext4, and xfs. while (done < total) { ssize_t delta = pread(fd, buf + done, total - done, off + done); if (!delta) break; ... } It is arguable whether filesystems should actually return EOF or -EINVAL, but since iomap filesystems support it, and so does the original DIO code, it seems reasonable to consolidate on that. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 09 September 2020, 03:31:33 UTC
e2cab03 f2fs: fix indefinite loop scanning for free nid If the sbi->ckpt->next_free_nid is not NAT block aligned and if there are free nids in that NAT block between the start of the block and next_free_nid, then those free nids will not be scanned in scan_nat_page(). This results into mismatch between nm_i->available_nids and the sum of nm_i->free_nid_count of all NAT blocks scanned. And nm_i->available_nids will always be greater than the sum of free nids in all the blocks. Under this condition, if we use all the currently scanned free nids, then it will loop forever in f2fs_alloc_nid() as nm_i->available_nids is still not zero but nm_i->free_nid_count of that partially scanned NAT block is zero. Fix this to align the nm_i->next_scan_nid to the first nid of the corresponding NAT block. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 09 September 2020, 03:31:33 UTC
123aaf7 f2fs: Fix type of section block count variables Commit da52f8ade40b ("f2fs: get the right gc victim section when section has several segments") added code to count blocks of each section using variables with type 'unsigned short', which has 2 bytes size in many systems. However, the counts can be larger than the 2 bytes range and type conversion results in wrong values. Especially when the f2fs sections have blocks as many as USHRT_MAX + 1, the count is handled as 0. This triggers eternal loop in init_dirty_segmap() at mount system call. Fix this by changing the type of the variables to block_t. Fixes: da52f8ade40b ("f2fs: get the right gc victim section when section has several segments") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 09 September 2020, 03:31:33 UTC
f9c88aa Merge tag 'drm-xlnx-dpsub-fixes-20200905' of git://linuxtv.org/pinchartl/media into drm-fixes Kconfig fixes for DRM_ZYNQMP_DPSUB DMA engine dependency Signed-off-by: Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200905172751.GC6319@pendragon.ideasonboard.com 09 September 2020, 01:31:31 UTC
e8a8a18 block: only call sched requeue_request() for scheduled requests Yang Yang reported the following crash caused by requeueing a flush request in Kyber: [ 2.517297] Unable to handle kernel paging request at virtual address ffffffd8071c0b00 ... [ 2.517468] pc : clear_bit+0x18/0x2c [ 2.517502] lr : sbitmap_queue_clear+0x40/0x228 [ 2.517503] sp : ffffff800832bc60 pstate : 00c00145 ... [ 2.517599] Process ksoftirqd/5 (pid: 51, stack limit = 0xffffff8008328000) [ 2.517602] Call trace: [ 2.517606] clear_bit+0x18/0x2c [ 2.517619] kyber_finish_request+0x74/0x80 [ 2.517627] blk_mq_requeue_request+0x3c/0xc0 [ 2.517637] __scsi_queue_insert+0x11c/0x148 [ 2.517640] scsi_softirq_done+0x114/0x130 [ 2.517643] blk_done_softirq+0x7c/0xb0 [ 2.517651] __do_softirq+0x208/0x3bc [ 2.517657] run_ksoftirqd+0x34/0x60 [ 2.517663] smpboot_thread_fn+0x1c4/0x2c0 [ 2.517667] kthread+0x110/0x120 [ 2.517669] ret_from_fork+0x10/0x18 This happens because Kyber doesn't track flush requests, so kyber_finish_request() reads a garbage domain token. Only call the scheduler's requeue_request() hook if RQF_ELVPRIV is set (like we do for the finish_request() hook in blk_mq_free_request()). Now that we're handling it in blk-mq, also remove the check from BFQ. Reported-by: Yang Yang <yang.yang@vivo.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 08 September 2020, 23:40:46 UTC
34d4ddd Merge tag 'linux-kselftest-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fix from Shuah Khan: "A single fix to timers test to disable timeout setting for tests to run and report accurate results" * tag 'linux-kselftest-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/timers: Turn off timeout setting 08 September 2020, 18:56:47 UTC
d6dc7e0 Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Eleven fixes, mostly in drivers or minor fixes in driver related infrastructure libraries (target, libfc and libsas). Most of the bugs fixed only show up under rare circumstances, the exception being the endianness problem in qla2xxx which is used as a device on some sparc systems" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mpt3sas: Don't call disable_irq from IRQ poll handler scsi: megaraid_sas: Don't call disable_irq from process IRQ poll scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA scsi: target: iscsi: Fix data digest calculation scsi: lpfc: Update lpfc version to 12.8.0.4 scsi: lpfc: Extend the RDF FPIN Registration descriptor for additional events scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery scsi: lpfc: Fix setting IRQ affinity with an empty CPU mask scsi: qla2xxx: Fix regression on sparc64 scsi: libfc: Fix for double free() scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort 08 September 2020, 18:42:58 UTC
e839317 seccomp: don't leave dangling ->notif if file allocation fails Christian and Kees both pointed out that this is a bit sloppy to open-code both places, and Christian points out that we leave a dangling pointer to ->notif if file allocation fails. Since we check ->notif for null in order to determine if it's ok to install a filter, this means people won't be able to install a filter if the file allocation fails for some reason, even if they subsequently should be able to. To fix this, let's hoist this free+null into its own little helper and use it. Reported-by: Kees Cook <keescook@chromium.org> Reported-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200902140953.1201956-1-tycho@tycho.pizza Signed-off-by: Kees Cook <keescook@chromium.org> 08 September 2020, 18:30:16 UTC
19d1d49 mailmap, MAINTAINERS: move to tycho.pizza I've changed my e-mail address to tycho.pizza, so let's reflect that in these files. Signed-off-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200902014017.934315-2-tycho@tycho.pizza Signed-off-by: Kees Cook <keescook@chromium.org> 08 September 2020, 18:29:57 UTC
a566a90 seccomp: don't leak memory when filter install races In seccomp_set_mode_filter() with TSYNC | NEW_LISTENER, we first initialize the listener fd, then check to see if we can actually use it later in seccomp_may_assign_mode(), which can fail if anyone else in our thread group has installed a filter and caused some divergence. If we can't, we partially clean up the newly allocated file: we put the fd, put the file, but don't actually clean up the *memory* that was allocated at filter->notif. Let's clean that up too. To accomplish this, let's hoist the actual "detach a notifier from a filter" code to its own helper out of seccomp_notify_release(), so that in case anyone adds stuff to init_listener(), they only have to add the cleanup code in one spot. This does a bit of extra locking and such on the failure path when the filter is not attached, but it's a slow failure path anyway. Fixes: 51891498f2da ("seccomp: allow TSYNC and USER_NOTIF together") Reported-by: syzbot+3ad9614a12f80994c32e@syzkaller.appspotmail.com Signed-off-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200902014017.934315-1-tycho@tycho.pizza Signed-off-by: Kees Cook <keescook@chromium.org> 08 September 2020, 18:19:50 UTC
6f6a73c Merge tag 'drm-fixes-2020-09-08' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "The i915 reverts are going to be a bit of a conflict mess for next, so I decided to dequeue them now, along with some msm fixes for a ring corruption issue, that Rob sent over the weekend. Summary: i915: - revert gpu relocation changes due to regression msm: - fixes for RPTR corruption issue" * tag 'drm-fixes-2020-09-08' of git://anongit.freedesktop.org/drm/drm: Revert "drm/i915/gem: Delete unused code" Revert "drm/i915/gem: Async GPU relocations only" Revert "drm/i915: Remove i915_gem_object_get_dirty_page()" drm/msm: Disable the RPTR shadow drm/msm: Disable preemption on all 5xx targets drm/msm: Enable expanded apriv support for a650 drm/msm: Split the a5xx preemption record 08 September 2020, 18:16:11 UTC
612ab8a Merge tag 'livepatching-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching fix from Petr Mladek: "Workaround for 'unreachable instruction' objtool warnings that happen with some compiler versions" * tag 'livepatching-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: Revert "kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled" 08 September 2020, 17:52:59 UTC
ceb1e08 nvme-tcp: cancel async events before freeing event struct Cancel async event work in case async event has been queued up, and nvme_tcp_submit_async_event() runs after event has been freed. Signed-off-by: David Milburn <dmilburn@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> 08 September 2020, 17:46:29 UTC
925dd04 nvme-rdma: cancel async events before freeing event struct Cancel async event work in case async event has been queued up, and nvme_rdma_submit_async_event() runs after event has been freed. Signed-off-by: David Milburn <dmilburn@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> 08 September 2020, 17:46:29 UTC
e126e82 nvme-fc: cancel async events before freeing event struct Cancel async event work in case async event has been queued up, and nvme_fc_submit_async_event() runs after event has been freed. Signed-off-by: David Milburn <dmilburn@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> 08 September 2020, 17:46:29 UTC
b63de84 nvme: Revert: Fix controller creation races with teardown flow The indicated patch introduced a barrier in the sysfs_delete attribute for the controller that rejects the request if the controller isn't created. "Created" is defined as at least 1 call to nvme_start_ctrl(). This is problematic in error-injection testing. If an error occurs on the initial attempt to create an association and the controller enters reconnect(s) attempts, the admin cannot delete the controller until either there is a successful association created or ctrl_loss_tmo times out. Where this issue is particularly hurtful is when the "admin" is the nvme-cli, it is performing a connection to a discovery controller, and it is initiated via auto-connect scripts. With the FC transport, if the first connection attempt fails, the controller enters a normal reconnect state but returns control to the cli thread that created the controller. In this scenario, the cli attempts to read the discovery log via ioctl, which fails, causing the cli to see it as an empty log and then proceeds to delete the discovery controller. The delete is rejected and the controller is left live. If the discovery controller reconnect then succeeds, there is no action to delete it, and it sits live doing nothing. Cc: <stable@vger.kernel.org> # v5.7+ Fixes: ce1518139e69 ("nvme: Fix controller creation races with teardown flow") Signed-off-by: James Smart <james.smart@broadcom.com> CC: Israel Rukshin <israelr@mellanox.com> CC: Max Gurtovoy <maxg@mellanox.com> CC: Christoph Hellwig <hch@lst.de> CC: Keith Busch <kbusch@kernel.org> CC: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> 08 September 2020, 17:46:28 UTC
a29c0ad Merge tag 'usb-serial-5.9-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.9-rc5 Here are some new device ids for 5.9. All have been in linux-next with no reported issues. * tag 'usb-serial-5.9-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: support dynamic Quectel USB compositions USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter 08 September 2020, 15:50:58 UTC
8304801 spi: spi-cadence-quadspi: Fix mapping of buffers for DMA reads Buffers need to mapped to DMA channel's device pointer instead of SPI controller's device pointer as its system DMA that actually does data transfer. Data inconsistencies have been reported when reading from flash without this fix. Fixes: ffa639e069fb ("mtd: spi-nor: cadence-quadspi: Add DMA support for direct mode reads") Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Link: https://lore.kernel.org/r/20200831130720.4524-1-vigneshr@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> 08 September 2020, 14:20:10 UTC
88ce2a5 block: restore a specific error code in bdev_del_partition mdadm relies on the fact that deleting an invalid partition returns -ENXIO or -ENOTTY to detect if a block device is a partition or a whole device. Fixes: 08fc1ab6d748 ("block: fix locking in bdev_del_partition") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 08 September 2020, 14:18:24 UTC
0c4c801 drm/i915: fix regression leading to display audio probe failure on GLK In commit 4f0b4352bd26 ("drm/i915: Extract cdclk requirements checking to separate function") the order of force_min_cdclk_changed check and intel_modeset_checks(), was reversed. This broke the mechanism to immediately force a new CDCLK minimum, and lead to driver probe errors for display audio on GLK platform with 5.9-rc1 kernel. Fix the issue by moving intel_modeset_checks() call later. [vsyrjala: It also broke the ability of planes to bump up the cdclk and thus could lead to underruns when eg. flipping from 32bpp to 64bpp framebuffer. To be clear, we still compute the new cdclk correctly but fail to actually program it to the hardware due to intel_set_cdclk_{pre,post}_plane_update() not getting called on account of state->modeset==false.] Fixes: 4f0b4352bd26 ("drm/i915: Extract cdclk requirements checking to separate function") BugLink: https://github.com/thesofproject/linux/issues/2410 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200901151036.1312357-1-kai.vehmanen@linux.intel.com (cherry picked from commit cf696856bc54a31f78e6538b84c8f7a006b6108b) Signed-off-by: Jani Nikula <jani.nikula@intel.com> 08 September 2020, 11:38:46 UTC
06be672 i2c: npcm7xx: Fix timeout calculation timeout_usec value calculation was wrong, the calculated value was in msec instead of usec. Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver") Signed-off-by: Tali Perry <tali.perry1@gmail.com> Reviewed-by: Avi Fishman <avifishman70@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Alex Qiu <xqiu@google.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> 08 September 2020, 06:24:59 UTC
20561da Revert "drm/i915/gem: Delete unused code" These commits caused a regression on Lenovo t520 sandybridge machine belonging to reporter. We are reverting them for 5.10 for other reasons, so just do it for 5.9 as well. This reverts commit 7ac2d2536dfa71c275a74813345779b1e7522c91. Reported-by: Harald Arnesen <harald@skogtun.org> Signed-off-by: Dave Airlie <airlied@redhat.com> 08 September 2020, 05:45:27 UTC
ad5d95e Revert "drm/i915/gem: Async GPU relocations only" These commits caused a regression on Lenovo t520 sandybridge machine belonging to reporter. We are reverting them for 5.10 for other reasons, so just do it for 5.9 as well. This reverts commit 9e0f9464e2ab36b864359a59b0e9058fdef0ce47. Reported-by: Harald Arnesen <harald@skogtun.org> Signed-off-by: Dave Airlie <airlied@redhat.com> 08 September 2020, 05:45:17 UTC
4993a8a Revert "drm/i915: Remove i915_gem_object_get_dirty_page()" These commits caused a regression on Lenovo t520 sandybridge machine belonging to reporter. We are reverting them for 5.10 for other reasons, so just do it for 5.9 as well. This reverts commit 763fedd6a216f94c2eb98d2f7ca21be3d3806e69. Reported-by: Harald Arnesen <harald@skogtun.org> Signed-off-by: Dave Airlie <airied@redhat.com> 08 September 2020, 05:44:07 UTC
8052ff4 Merge tag 'drm-msm-fixes-2020-09-04' of https://gitlab.freedesktop.org/drm/msm into drm-fixes A few fixes for a potential RPTR corruption issue. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGvnr6Nhz2J0sjv2G+j7iceVtaDiJDT8T88uW6jiBfOGKQ@mail.gmail.com 08 September 2020, 04:51:16 UTC
2d892cc btrfs: fix NULL pointer dereference after failure to create snapshot When trying to get a new fs root for a snapshot during the transaction at transaction.c:create_pending_snapshot(), if btrfs_get_new_fs_root() fails we leave "pending->snap" pointing to an error pointer, and then later at ioctl.c:create_snapshot() we dereference that pointer, resulting in a crash: [12264.614689] BUG: kernel NULL pointer dereference, address: 00000000000007c4 [12264.615650] #PF: supervisor write access in kernel mode [12264.616487] #PF: error_code(0x0002) - not-present page [12264.617436] PGD 0 P4D 0 [12264.618328] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [12264.619150] CPU: 0 PID: 2310635 Comm: fsstress Tainted: G W 5.9.0-rc3-btrfs-next-67 #1 [12264.619960] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [12264.621769] RIP: 0010:btrfs_mksubvol+0x438/0x4a0 [btrfs] [12264.622528] Code: bc ef ff ff (...) [12264.624092] RSP: 0018:ffffaa6fc7277cd8 EFLAGS: 00010282 [12264.624669] RAX: 00000000fffffff4 RBX: ffff9d3e8f151a60 RCX: 0000000000000000 [12264.625249] RDX: 0000000000000001 RSI: ffffffff9d56c9be RDI: fffffffffffffff4 [12264.625830] RBP: ffff9d3e8f151b48 R08: 0000000000000000 R09: 0000000000000000 [12264.626413] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffff4 [12264.626994] R13: ffff9d3ede380538 R14: ffff9d3ede380500 R15: ffff9d3f61b2eeb8 [12264.627582] FS: 00007f140d5d8200(0000) GS:ffff9d3fb5e00000(0000) knlGS:0000000000000000 [12264.628176] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12264.628773] CR2: 00000000000007c4 CR3: 000000020f8e8004 CR4: 00000000003706f0 [12264.629379] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [12264.629994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [12264.630594] Call Trace: [12264.631227] btrfs_mksnapshot+0x7b/0xb0 [btrfs] [12264.631840] __btrfs_ioctl_snap_create+0x16f/0x1a0 [btrfs] [12264.632458] btrfs_ioctl_snap_create_v2+0xb0/0xf0 [btrfs] [12264.633078] btrfs_ioctl+0x1864/0x3130 [btrfs] [12264.633689] ? do_sys_openat2+0x1a7/0x2d0 [12264.634295] ? kmem_cache_free+0x147/0x3a0 [12264.634899] ? __x64_sys_ioctl+0x83/0xb0 [12264.635488] __x64_sys_ioctl+0x83/0xb0 [12264.636058] do_syscall_64+0x33/0x80 [12264.636616] entry_SYSCALL_64_after_hwframe+0x44/0xa9 (gdb) list *(btrfs_mksubvol+0x438) 0x7c7b8 is in btrfs_mksubvol (fs/btrfs/ioctl.c:858). 853 ret = 0; 854 pending_snapshot->anon_dev = 0; 855 fail: 856 /* Prevent double freeing of anon_dev */ 857 if (ret && pending_snapshot->snap) 858 pending_snapshot->snap->anon_dev = 0; 859 btrfs_put_root(pending_snapshot->snap); 860 btrfs_subvolume_release_metadata(root, &pending_snapshot->block_rsv); 861 free_pending: 862 if (pending_snapshot->anon_dev) So fix this by setting "pending->snap" to NULL if we get an error from the call to btrfs_get_new_fs_root() at transaction.c:create_pending_snapshot(). Fixes: 2dfb1e43f57dd3 ("btrfs: preallocate anon block device at first phase of snapshot creation") Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> 07 September 2020, 19:18:35 UTC
7c6bbdf usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes According to the PMC Type C Subsystem (TCSS) Mux programming guide rev 0.7, bits 4 and 5 are reserved in Alternate modes. SBU Orientation and HSL Orientation needs to be configured only during initial cable detection in USB connect flow based on device property of "sbu-orientation" and "hsl-orientation". Configuring these reserved bits in the Alternate modes may result in delay in display link training or some unexpected behaviour. So do not configure them while issuing Alternate Mode requests. Fixes: ff4a30d5e243 ("usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation") Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200907142152.35678-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 September 2020, 15:05:02 UTC
294955f usb: typec: intel_pmc_mux: Do not configure Altmode HPD High According to the PMC Type C Subsystem (TCSS) Mux programming guide rev 0.7, bit 14 is reserved in Alternate mode. In DP Alternate Mode state, if the HPD_STATE (bit 7) field in the status update command VDO is set to HPD_HIGH, HPD is configured via separate HPD mode request after configuring DP Alternate mode request. Configuring reserved bit may show unexpected behaviour. So do not configure them while issuing the Alternate Mode request. Fixes: 7990be48ef4d ("usb: typec: mux: intel: Handle alt mode HPD_HIGH") Cc: stable@vger.kernel.org Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200907142152.35678-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 September 2020, 15:04:59 UTC
back to top