https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
e041e0a lib/bitmap: extend comment for bitmap_(from,to)_arr32() On LE systems bitmaps are naturally ordered, therefore we can potentially use bitmap_copy routines when converting from 32-bit arrays, even if host system is 64-bit. But it may lead to out-of-bond access due to unsafe typecast, and the bitmap_(from,to)_arr32 comment doesn't explain that clearly CC: Alexander Gordeev <agordeev@linux.ibm.com> CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: Christian Borntraeger <borntraeger@linux.ibm.com> CC: Claudio Imbrenda <imbrenda@linux.ibm.com> CC: David Hildenbrand <david@redhat.com> CC: Heiko Carstens <hca@linux.ibm.com> CC: Janosch Frank <frankja@linux.ibm.com> CC: Rasmus Villemoes <linux@rasmusvillemoes.dk> CC: Sven Schnelle <svens@linux.ibm.com> CC: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Yury Norov <yury.norov@gmail.com> 03 June 2022, 13:52:58 UTC
6d7131b include/linux/find: Fix documentation The order of the arguments in function documentation doesn't fit the implementation. Change the documentation so that it corresponds to the code. This prevent people to get confused when reading the documentation. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Yury Norov <yury.norov@gmail.com> 03 June 2022, 13:52:57 UTC
430cd4a lib/bitmap.c make bitmap_print_bitmask_to_buf parseable The documentation of such function is not on a proper ReST format, as reported by Sphinx: Documentation/core-api/kernel-api:81: ./lib/bitmap.c:532: WARNING: Unexpected indentation. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:526: WARNING: Inline emphasis start-string without end-string. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:532: WARNING: Inline emphasis start-string without end-string. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:532: WARNING: Inline emphasis start-string without end-string. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:533: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:536: WARNING: Definition list ends without a blank line; unexpected unindent. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:542: WARNING: Unexpected indentation. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:536: WARNING: Inline emphasis start-string without end-string. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:536: WARNING: Inline emphasis start-string without end-string. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:543: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:552: WARNING: Unexpected indentation. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:545: WARNING: Inline emphasis start-string without end-string. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:545: WARNING: Inline emphasis start-string without end-string. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:552: WARNING: Inline emphasis start-string without end-string. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:552: WARNING: Inline emphasis start-string without end-string. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:554: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:556: WARNING: Definition list ends without a blank line; unexpected unindent. Documentation/core-api/kernel-api:81: ./lib/bitmap.c:580: WARNING: Unexpected indentation. So, the produced output at: https://www.kernel.org/doc/html/latest/core-api/kernel-api.html?#c.bitmap_print_bitmask_to_buf is broken. Fix it by adding spaces and marking the literal blocks. Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Yury Norov <yury.norov@gmail.com> 03 June 2022, 13:52:57 UTC
c6bc5a3 MAINTAINERS: add cpumask and nodemask files to BITMAP_API cpumask and nodemask APIs are thin wrappers around basic bitmap API, and corresponding files are not formally maintained. This patch adds them to BITMAP_API section, so that bitmap folks would have closer look at it. Signed-off-by: Yury Norov <yury.norov@gmail.com> 03 June 2022, 13:52:57 UTC
dcf23cc arch/x86: replace nodes_weight with nodes_empty where appropriate mm code calls nodes_weight() to check if any bit of a given nodemask is set. We can do it more efficiently with nodes_empty() because nodes_empty() stops traversing the nodemask as soon as it finds first set bit, while nodes_weight() counts all bits unconditionally. Signed-off-by: Yury Norov <yury.norov@gmail.com> 03 June 2022, 13:52:57 UTC
b55032f mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate mm/vmstat.c code calls cpumask_weight() to check if any bit of a given cpumask is set. We can do it more efficiently with cpumask_empty() because cpumask_empty() stops traversing the cpumask as soon as it finds first set bit, while cpumask_weight() counts all bits unconditionally. Signed-off-by: Yury Norov <yury.norov@gmail.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> 03 June 2022, 13:52:57 UTC
95e3a97 clocksource: replace cpumask_weight with cpumask_empty in clocksource.c clocksource_verify_percpu() calls cpumask_weight() to check if any bit of a given cpumask is set. We can do it more efficiently with cpumask_empty() because cpumask_empty() stops traversing the cpumask as soon as it finds first set bit, while cpumask_weight() counts all bits unconditionally. Signed-off-by: Yury Norov <yury.norov@gmail.com> 03 June 2022, 13:52:57 UTC
99248e3 genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate __irq_build_affinity_masks() calls cpumask_weight() to check if any bit of a given cpumask is set. We can do it more efficiently with cpumask_empty() because cpumask_empty() stops traversing the cpumask as soon as it finds first set bit, while cpumask_weight() counts all bits unconditionally. Signed-off-by: Yury Norov <yury.norov@gmail.com> 03 June 2022, 13:52:57 UTC
d72002a irq: mips: replace cpumask_weight with cpumask_empty where appropriate bcm6345_l1_of_init() calls cpumask_weight() to check if any bit of a given cpumask is set. We can do it more efficiently with cpumask_empty() because cpumask_empty() stops traversing the cpumask as soon as it finds first set bit, while cpumask_weight() counts all bits unconditionally. Signed-off-by: Yury Norov <yury.norov@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> 03 June 2022, 13:52:57 UTC
a37e94f drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate i915_pmu_cpu_online() calls cpumask_weight() to check if any bit of a given cpumask is set. We can do it more efficiently with cpumask_empty() because cpumask_empty() stops traversing the cpumask as soon as it finds first set bit, while cpumask_weight() counts all bits unconditionally. Signed-off-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> 03 June 2022, 13:52:57 UTC
4aec74b arch/x86: replace cpumask_weight with cpumask_empty where appropriate In some cases, arch/x86 code calls cpumask_weight() to check if any bit of a given cpumask is set. We can do it more efficiently with cpumask_empty() because cpumask_empty() stops traversing the cpumask as soon as it finds first set bit, while cpumask_weight() counts all bits unconditionally. Signed-off-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> 03 June 2022, 13:52:57 UTC
b6dad11 arch/ia64: replace cpumask_weight with cpumask_empty where appropriate setup_arch() calls cpumask_weight() to check if any bit of a given cpumask is set. We can do it more efficiently with cpumask_empty() because cpumask_empty() stops traversing the cpumask as soon as it finds first set bit, while cpumask_weight() counts all bits unconditionally. Signed-off-by: Yury Norov <yury.norov@gmail.com> 03 June 2022, 13:52:57 UTC
71c1a51 arch/alpha: replace cpumask_weight with cpumask_empty where appropriate common_shutdown_1() calls cpumask_weight() to check if any bit of a given cpumask is set. We can do it more efficiently with cpumask_empty() because cpumask_empty() stops traversing the cpumask as soon as it finds first set bit, while cpumask_weight() counts all bits unconditionally. Signed-off-by: Yury Norov <yury.norov@gmail.com> 03 June 2022, 13:52:57 UTC
8f51558 risc-v: replace bitmap_weight with bitmap_empty in riscv_fill_hwcap() bitmap_empty() is better than bitmap_weight() because it may return earlier, and improves on readability. CC: Albert Ou <aou@eecs.berkeley.edu> CC: Anup Patel <anup@brainfault.org> CC: Atish Patra <atishp@atishpatra.org> CC: Jisheng Zhang <jszhang@kernel.org> CC: Palmer Dabbelt <palmer@dabbelt.com> CC: Paul Walmsley <paul.walmsley@sifive.com> CC: Tsukasa OI <research_trasio@irq.a4lg.com> CC: linux-riscv@lists.infradead.org CC: linux-kernel@vger.kernel.org Signed-off-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Anup Patel <anup@brainfault.org> 03 June 2022, 13:52:57 UTC
8be4493 MAINTAINERS: Add maintainer information for LoongArch Add the maintainer information for the LoongArch (LA or LArch for short) architecture. Reviewed-by: Guo Ren <guoren@kernel.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:29 UTC
9e8536e LoongArch: Add Loongson-3 default config file Add a default config file for LoongArch-based Loongson-3 platform. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:29 UTC
d4b6f15 LoongArch: Add Non-Uniform Memory Access (NUMA) support Add Non-Uniform Memory Access (NUMA) support for LoongArch. LoongArch has 48-bit physical address, but the HyperTransport I/O bus only support 40-bit address, so we need a custom phys_to_dma() and dma_to_phys() to extract the 4-bit node id (bit 44~47) from Loongson-3's 48-bit physical address space and embed it into 40-bit. In the 40-bit dma address, node id offset can be read from the LS7A_DMA_CFG register. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:29 UTC
46859ac LoongArch: Add multi-processor (SMP) support LoongArch-based procesors have 4, 8 or 16 cores per package. This patch adds multi-processor (SMP) support for LoongArch. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:29 UTC
c6b99be LoongArch: Add VDSO and VSYSCALL support Add VDSO and VSYSCALL support (sigreturn, gettimeofday and its friends) for LoongArch. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:28 UTC
559671e LoongArch: Add some library functions Add some library functions for LoongArch, including: delay, memset, memcpy, memmove, copy_user, strncpy_user, strnlen_user and tlb dump functions. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:28 UTC
7153c3c LoongArch: Add misc common routines Add some misc common routines for LoongArch, including: asm-offsets routines, futex functions, i/o memory access functions, frame-buffer functions, procfs information display, etc. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:28 UTC
fcdfe9d LoongArch: Add ELF and module support Add ELF-related definition and module relocation code for basic LoongArch support. Cc: Jessica Yu <jeyu@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:28 UTC
b74baf4 LoongArch: Add signal handling support Add ucontext/sigcontext definition and signal handling support for LoongArch. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:28 UTC
be76964 LoongArch: Add system call support Add system call support and related uaccess.h for LoongArch. Q: Why keep _ARCH_WANT_SYS_CLONE definition while there is clone3: A: The latest glibc release has some basic support for clone3 but it is not complete. E.g., pthread_create() and spawni() have converted to use clone3 but fork() will still use clone. Moreover, some seccomp related applications can still not work perfectly with clone3. E.g., Chromium sandbox cannot work at all and there is no solution for it, which is more terrible than the fork() story [1]. [1] https://chromium-review.googlesource.com/c/chromium/src/+/2936184 Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:28 UTC
09cfefb LoongArch: Add memory management Add memory management support for LoongArch, including: cache and tlb management, page fault handling and ioremap/mmap support. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:28 UTC
803b0fc LoongArch: Add process management Add process management support for LoongArch, including: thread info definition, context switch and process tracing. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:28 UTC
0603839 LoongArch: Add exception/interrupt handling Add the exception and interrupt handling machanism for basic LoongArch support. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:28 UTC
628c3bb LoongArch: Add boot and setup routines Add basic boot, setup and reset routines for LoongArch. Now, LoongArch machines use UEFI-based firmware. The firmware passes configuration information to the kernel via ACPI and DMI/SMBIOS. Currently an existing interface between the kernel and the bootloader is implemented. Kernel gets 2 values from the bootloader, passed in registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and non-UEFI firmware, while a1 is a pointer to an FDT with systable, memmap, cmdline and initrd information. The standard UEFI boot protocol (EFISTUB) will be added later. Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:28 UTC
b738c10 LoongArch: Add other common headers Add some other common headers for basic LoongArch support. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:28 UTC
5b0b14e LoongArch: Add atomic/locking headers Add common headers (atomic, bitops, barrier and locking) for basic LoongArch support. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:28 UTC
f2ac457 LoongArch: Add CPU definition headers Add common headers (CPU definition and address space layout) for basic LoongArch support. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:28 UTC
fa96b57 LoongArch: Add build infrastructure Add Kbuild, Makefile, Kconfig and link script for LoongArch build infrastructure. Reviewed-by: Guo Ren <guoren@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:27 UTC
439057e LoongArch: Add writecombine support for drm LoongArch maintains cache coherency in hardware, but its WUC attribute (Weak-ordered UnCached, which is similar to WC) is out of the scope of cache coherency machanism. This means WUC can only used for write-only memory regions. Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:27 UTC
08145b0 LoongArch: Add ELF-related definitions Add ELF-related definitions for LoongArch, including: EM_LOONGARCH, KEXEC_ARCH_LOONGARCH, AUDIT_ARCH_LOONGARCH32, AUDIT_ARCH_LOONGARCH64 and NT_LOONGARCH_*. Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:27 UTC
f23b225 Documentation/zh_CN: Add basic LoongArch documentations Add some basic documentation (zh_CN version) for LoongArch. LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V. LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit version (LA32S) and a 64-bit version (LA64). Reviewed-by: Alex Shi <alexs@kernel.org> Reviewed-by: Yanteng Si <siyanteng@loongson.cn> Reviewed-by: Guo Ren <guoren@kernel.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:27 UTC
0ea8ce6 Documentation: LoongArch: Add basic documentations Add some basic documentation for LoongArch. LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V. LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit version (LA32S) and a 64-bit version (LA64). Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:27 UTC
fa84f89 irqchip/loongson-liointc: Fix build error for LoongArch liointc driver is shared by MIPS and LoongArch, this patch adjust the code to fix build error for LoongArch. Acked-by: Marc Zyngier <maz@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:27 UTC
987a3e0 irqchip: Adjust Kconfig for Loongson HTVEC will be shared by both MIPS-based and LoongArch-based Loongson processors (not only Loongson-3), so we adjust its description. HTPIC is only used by MIPS-based Loongson, so we add a MIPS dependency. Acked-by: Marc Zyngier <maz@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> 03 June 2022, 12:09:27 UTC
6ba6883 parisc: fix a crash with multicore scheduler With the kernel 5.18, the system will hang on boot if it is compiled with CONFIG_SCHED_MC. The last printed message is "Brought up 1 node, 1 CPU". The crash happens in sd_init tl->mask (which is cpu_coregroup_mask) returns an empty mask. This happens because cpu_topology[0].core_sibling is empty. Consequently, sd_span is set to an empty mask sd_id = cpumask_first(sd_span) sets sd_id == NR_CPUS (because the mask is empty) sd->shared = *per_cpu_ptr(sdd->sds, sd_id); sets sd->shared to NULL because sd_id is out of range atomic_inc(&sd->shared->ref); crashes without printing anything We can fix it by calling reset_cpu_topology() from init_cpu_topology() - this will initialize the sibling masks on CPUs, so that they're not empty. This patch also removes the variable "dualcores_found", it is useless, because during boot, init_cpu_topology is called before store_cpu_topology. Thus, set_sched_topology(parisc_mc_topology) is never called. We don't need to call it at all because default_topology in kernel/sched/topology.c contains the same items as parisc_mc_topology. Note that we should not call store_cpu_topology() from init_per_cpu() because it is called too early in the kernel initialization process and it results in the message "Failure to register CPU0 device". Before this patch, store_cpu_topology() would exit immediatelly because cpuid_topo->core id was uninitialized and it was 0. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v5.18 Signed-off-by: Helge Deller <deller@gmx.de> 03 June 2022, 07:54:01 UTC
41e46b3 block: Fix potential deadlock in blk_ia_range_sysfs_show() When being read, a sysfs attribute is already protected against removal with the kobject node active reference counter. As a result, in blk_ia_range_sysfs_show(), there is no need to take the queue sysfs lock when reading the value of a range attribute. Using the queue sysfs lock in this function creates a potential deadlock situation with the disk removal, something that a lockdep signals with a splat when the device is removed: [ 760.703551] Possible unsafe locking scenario: [ 760.703551] [ 760.703554] CPU0 CPU1 [ 760.703556] ---- ---- [ 760.703558] lock(&q->sysfs_lock); [ 760.703565] lock(kn->active#385); [ 760.703573] lock(&q->sysfs_lock); [ 760.703579] lock(kn->active#385); [ 760.703587] [ 760.703587] *** DEADLOCK *** Solve this by removing the mutex_lock()/mutex_unlock() calls from blk_ia_range_sysfs_show(). Fixes: a2247f19ee1c ("block: Add independent access ranges support") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20220603021905.1441419-1-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 03 June 2022, 05:02:37 UTC
4042043 Merge tag 'drm/tegra/for-5.19-prep-work' of https://gitlab.freedesktop.org/drm/tegra into drm-next drm/tegra: Preparatory work for v5.19 This contains a single patch from a series that's ready to go for v5.10 but is also a shared build-time dependency for an IOMMU series that is planned for v5.20. The idea is to take this into v5.19 to fulfill that dependency and remove the need for close coordination for the two series. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220601100335.3841301-1-thierry.reding@gmail.com 03 June 2022, 02:59:45 UTC
b8042ff Merge tag 'msm-next-5.19-fixes-06-01' of https://gitlab.freedesktop.org/abhinavk/msm into drm-next 5.19 fixes for msm-next - Fix to add minimum ICC vote in the msm_mdss pm_resume path to address bootup splats - Fix to avoid dereferencing without checking in WB encoder - Fix to avoid crash during suspend in DP driver by ensuring interrupt mask bits are updated - Remove unused code from dpu_encoder_virt_atomic_check() - Fix to remove redundant init of dsc variable Signed-off-by: Dave Airlie <airlied@redhat.com> From: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/927b201e-a734-a29d-b9fb-b9889e1f7795@quicinc.com 03 June 2022, 01:35:23 UTC
61114e7 riscv: Move alternative length validation into subsection After commit 49b290e430d3 ("riscv: prevent compressed instructions in alternatives"), builds with LLVM's integrated assembler fail: In file included from arch/riscv/mm/init.c:10: In file included from ./include/linux/mm.h:29: In file included from ./include/linux/pgtable.h:6: In file included from ./arch/riscv/include/asm/pgtable.h:108: ./arch/riscv/include/asm/tlbflush.h:23:2: error: expected assembly-time absolute expression ALT_FLUSH_TLB_PAGE(__asm__ __volatile__ ("sfence.vma %0" : : "r" (addr) : "memory")); ^ ./arch/riscv/include/asm/errata_list.h:33:5: note: expanded from macro 'ALT_FLUSH_TLB_PAGE' asm(ALTERNATIVE("sfence.vma %0", "sfence.vma", SIFIVE_VENDOR_ID, \ ^ ./arch/riscv/include/asm/alternative-macros.h:187:2: note: expanded from macro 'ALTERNATIVE' _ALTERNATIVE_CFG(old_content, new_content, vendor_id, errata_id, CONFIG_k) ^ ./arch/riscv/include/asm/alternative-macros.h:113:2: note: expanded from macro '_ALTERNATIVE_CFG' __ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, IS_ENABLED(CONFIG_k)) ^ ./arch/riscv/include/asm/alternative-macros.h:110:2: note: expanded from macro '__ALTERNATIVE_CFG' ALT_NEW_CONTENT(vendor_id, errata_id, enable, new_c) ^ ./arch/riscv/include/asm/alternative-macros.h:99:3: note: expanded from macro 'ALT_NEW_CONTENT' ".org . - (889b - 888b) + (887b - 886b)\n" \ ^ <inline asm>:26:6: note: instantiated into assembly here .org . - (889b - 888b) + (887b - 886b) ^ This error happens because LLVM's integrated assembler has a one-pass design, which means it cannot figure out the instruction lengths when the .org directive is outside of the subsection that contains the instructions, which was changed by the .option directives added by the above change. Move the .org directives before the .previous directive so that these directives are always within the same subsection, which resolves the failures and does not introduce any new issues with GNU as. This was done for arm64 in commit 966a0acce2fc ("arm64/alternatives: move length validation inside the subsection") and commit 22315a2296f4 ("arm64: alternatives: Move length validation in alternative_{insn, endif}"). While there is no error from the assembly versions of the macro, they appear to have the same problem so just make the same change there as well so that there are no problems in the future. Link: https://github.com/ClangBuiltLinux/linux/issues/1640 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220516214520.3252074-1-nathan@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 02 June 2022, 22:55:22 UTC
50fd82b Merge tag 'docs-5.19-2' of git://git.lwn.net/linux Pull documentation fixes from Jonathan Corbet: "A handful of late-arriving documentation fixes and the addition of an SVG tux logo which, I'm assured, we're going to want" * tag 'docs-5.19-2' of git://git.lwn.net/linux: documentation: Format button_dev as a pointer. docs: add SVG version of the Linux logo docs: move Linux logo into a new `images` folder docs: blockdev: change title to match section content docs/conf.py: Cope with removal of language=None in Sphinx 5.0.0 02 June 2022, 22:36:06 UTC
baf86ac Merge tag 'asm-generic-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fixes from Arnd Bergmann: "The header cleanup series from Masahiro Yamada ended up causing some regressions in the ABI because of an ambigous uid_t type. This was only caught after the original patches got merged, but at least the fixes are trivial and hopefully complete" * tag 'asm-generic-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: binder: fix sender_euid type in uapi header sparc: fix mis-use of __kernel_{uid,gid}_t in uapi/asm/stat.h powerpc: use __kernel_{uid,gid}32_t in uapi/asm/stat.h mips: use __kernel_{uid,gid}32_t in uapi/asm/stat.h 02 June 2022, 22:32:26 UTC
09a0181 Merge tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM SoC updates from Arnd Bergmann: "This is the second part of the general SoC updates, containing everything that did not make it in the initial pull request, or that came in as a bugfix later. - Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip, including a new machine using an ASPEED BMC. - More DT fixes from Krzysztof Kozlowski across platforms - A new SoC platform for the GXP baseboard management controller, used in current server products from HPE" * tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits) ARM: configs: Enable more audio support for i.MX tee: optee: Pass a pointer to virt_addr_valid() arm64: dts: rockchip: rename Quartz64-A bluetooth gpios arm64: dts: rockchip: add clocks property to cru node rk3368 arm64: dts: rockchip: add clocks property to cru node rk3308 arm64: dts: rockchip: add clocks to rk356x cru ARM: dts: rockchip: add clocks property to cru node rk3228 ARM: dts: rockchip: add clocks property to cru node rk3036 ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188 ARM: dts: rockchip: add clocks property to cru node rk3288 ARM: dts: rockchip: Remove "amba" bus nodes from rv1108 ARM: dts: rockchip: add clocks property to cru node rv1108 arm64: dts: sprd: use new 'dma-channels' property ARM: dts: da850: use new 'dma-channels' property ARM: dts: pxa: use new 'dma-channels/requests' properties soc: ixp4xx/qmgr: Fix unused match warning ARM: ep93xx: Make ts72xx_register_flash() static ARM: configs: enable support for Kontron KSwitch D10 ep93xx: clock: Do not return the address of the freed memory arm64: dts: intel: add device tree for n6000 ... 02 June 2022, 22:27:44 UTC
96479c0 Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ... 02 June 2022, 22:23:54 UTC
9c375cf riscv: mm: init: make pt_ops_set_[early|late|fixmap] static These three functions are only used in init.c, so make them static. Fix W=1 warnings like below: arch/riscv/mm/init.c:721:13: warning: no previous prototype for function 'pt_ops_set_early' [-Wmissing-prototypes] void __init pt_ops_set_early(void) ^ Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220516143204.2603-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 02 June 2022, 21:50:41 UTC
58f9d52 Merge tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. Current release - new code bugs: - af_packet: make sure to pull the MAC header, avoid skb panic in GSO - ptp_clockmatrix: fix inverted logic in is_single_shot() - netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag - dt-bindings: net: adin: fix adi,phy-output-clock description syntax - wifi: iwlwifi: pcie: rename CAUSE macro, avoid MIPS build warning Previous releases - regressions: - Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process" - tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd - nf_tables: disallow non-stateful expression in sets earlier - nft_limit: clone packet limits' cost value - nf_tables: double hook unregistration in netns path - ping6: fix ping -6 with interface name Previous releases - always broken: - sched: fix memory barriers to prevent skbs from getting stuck in lockless qdiscs - neigh: set lower cap for neigh_managed_work rearming, avoid constantly scheduling the probe work - bpf: fix probe read error on big endian in ___bpf_prog_run() - amt: memory leak and error handling fixes Misc: - ipv6: expand & rename accept_unsolicited_na to accept_untracked_na" * tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits) net/af_packet: make sure to pull mac header net: add debug info to __skb_pull() net: CONFIG_DEBUG_NET depends on CONFIG_NET stmmac: intel: Add RPL-P PCI ID net: stmmac: use dev_err_probe() for reporting mdio bus registration failure tipc: check attribute length for bearer name ice: fix access-beyond-end in the switch code nfp: remove padding in nfp_nfdk_tx_desc ax25: Fix ax25 session cleanup problems net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline sfc/siena: fix wrong tx channel offset with efx_separate_tx_channels sfc/siena: fix considering that all channels have TX queues socket: Don't use u8 type in uapi socket.h net/sched: act_api: fix error code in tcf_ct_flow_table_fill_tuple_ipv6() net: ping6: Fix ping -6 with interface name macsec: fix UAF bug for real_dev octeontx2-af: fix error code in is_valid_offset() wifi: mac80211: fix use-after-free in chanctx code bonding: guard ns_targets by CONFIG_IPV6 tcp: tcp_rtx_synack() can be called from process context ... 02 June 2022, 19:50:16 UTC
7350396 module: Fix prefix for module.sig_enforce module param Commit cfc1d277891e ("module: Move all into module/") changed the prefix of the module param by moving/renaming files. A later commit also moves the module_param() into a different file, thereby changing the prefix yet again. This would break kernel cmdline compatibility and also userspace compatibility at /sys/module/module/parameters/sig_enforce. So, set the prefix back to "module.". Fixes: cfc1d277891e ("module: Move all into module/") Link: https://lore.kernel.org/lkml/20220602034111.4163292-1-saravanak@google.com/ Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Aaron Tomlin <atomlin@redhat.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2022, 19:44:33 UTC
78c09c0 kselftest/arm64: signal: Skip SVE signal test if not enough VLs supported On platform where SVE is supported but there are less than 2 VLs available the signal SVE change test should be skipped instead of failing. Reported-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220524103149.2802-1-cristian.marussi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 02 June 2022, 19:29:17 UTC
73e2d82 arm64: Initialize jump labels before setup_machine_fdt() A static key warning splat appears during early boot on arm64 systems that credit randomness from devicetrees that contain an "rng-seed" property. This is because setup_machine_fdt() is called before jump_label_init() during setup_arch(). Let's swap the order of these two calls so that jump labels are initialized before the devicetree is unflattened and the rng seed is credited. static_key_enable_cpuslocked(): static key '0xffffffe51c6fcfc0' used before call to jump_label_init() WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:166 static_key_enable_cpuslocked+0xb0/0xb8 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0+ #224 44b43e377bfc84bc99bb5ab885ff694984ee09ff pstate: 600001c9 (nZCv dAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : static_key_enable_cpuslocked+0xb0/0xb8 lr : static_key_enable_cpuslocked+0xb0/0xb8 sp : ffffffe51c393cf0 x29: ffffffe51c393cf0 x28: 000000008185054c x27: 00000000f1042f10 x26: 0000000000000000 x25: 00000000f10302b2 x24: 0000002513200000 x23: 0000002513200000 x22: ffffffe51c1c9000 x21: fffffffdfdc00000 x20: ffffffe51c2f0831 x19: ffffffe51c6fcfc0 x18: 00000000ffff1020 x17: 00000000e1e2ac90 x16: 00000000000000e0 x15: ffffffe51b710708 x14: 0000000000000066 x13: 0000000000000018 x12: 0000000000000000 x11: 0000000000000000 x10: 00000000ffffffff x9 : 0000000000000000 x8 : 0000000000000000 x7 : 61632065726f6665 x6 : 6220646573752027 x5 : ffffffe51c641d25 x4 : ffffffe51c13142c x3 : ffff0a00ffffff05 x2 : 40000000ffffe003 x1 : 00000000000001c0 x0 : 0000000000000065 Call trace: static_key_enable_cpuslocked+0xb0/0xb8 static_key_enable+0x2c/0x40 crng_set_ready+0x24/0x30 execute_in_process_context+0x80/0x90 _credit_init_bits+0x100/0x154 add_bootloader_randomness+0x64/0x78 early_init_dt_scan_chosen+0x140/0x184 early_init_dt_scan_nodes+0x28/0x4c early_init_dt_scan+0x40/0x44 setup_machine_fdt+0x7c/0x120 setup_arch+0x74/0x1d8 start_kernel+0x84/0x44c __primary_switched+0xc0/0xc8 ---[ end trace 0000000000000000 ]--- random: crng init done Machine model: Google Lazor (rev1 - 2) with LTE Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Fixes: f5bda35fba61 ("random: use static branch for crng_ready()") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20220602022109.780348-1-swboyd@chromium.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 02 June 2022, 19:22:48 UTC
189129a arm64: hibernate: Fix syntax errors in comments Delete the redundant word 'to'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20220602180228.4259-1-wangxiang@cdjrlc.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 02 June 2022, 19:16:22 UTC
c399c85 Merge tag 'pci-v5.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fixes from Bjorn Helgaas: - Revert brcmstb patches that broke booting on Raspberry Pi Compute Module 4 (Bjorn Helgaas) - Fix bridge_d3_blacklist[] error that overwrote the existing Gigabyte X299 entry instead of adding a new one (Bjorn Helgaas) - Update Lorenzo Pieralisi's email address in MAINTAINERS (Lorenzo Pieralisi) * tag 'pci-v5.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update Lorenzo Pieralisi's email address PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299 Revert "PCI: brcmstb: Split brcm_pcie_setup() into two funcs" Revert "PCI: brcmstb: Add mechanism to turn on subdev regulators" Revert "PCI: brcmstb: Add control of subdevice voltage regulators" Revert "PCI: brcmstb: Do not turn off WOL regulators on suspend" 02 June 2022, 19:11:25 UTC
0c9782e x86/sgx: Set active memcg prior to shmem allocation When the system runs out of enclave memory, SGX can reclaim EPC pages by swapping to normal RAM. These backing pages are allocated via a per-enclave shared memory area. Since SGX allows unlimited over commit on EPC memory, the reclaimer thread can allocate a large number of backing RAM pages in response to EPC memory pressure. When the shared memory backing RAM allocation occurs during the reclaimer thread context, the shared memory is charged to the root memory control group, and the shmem usage of the enclave is not properly accounted for, making cgroups ineffective at limiting the amount of RAM an enclave can consume. For example, when using a cgroup to launch a set of test enclaves, the kernel does not properly account for 50% - 75% of shmem page allocations on average. In the worst case, when nearly all allocations occur during the reclaimer thread, the kernel accounts less than a percent of the amount of shmem used by the enclave's cgroup to the correct cgroup. SGX stores a list of mm_structs that are associated with an enclave. Pick one of them during reclaim and charge that mm's memcg with the shmem allocation. The one that gets picked is arbitrary, but this list almost always only has one mm. The cases where there is more than one mm with different memcg's are not worth considering. Create a new function - sgx_encl_alloc_backing(). This function is used whenever a new backing storage page needs to be allocated. Previously the same function was used for page allocation as well as retrieving a previously allocated page. Prior to backing page allocation, if there is a mm_struct associated with the enclave that is requesting the allocation, it is set as the active memory control group. [ dhansen: - fix merge conflict with ELDU fixes - check against actual ksgxd_tsk, not ->mm ] Cc: stable@vger.kernel.org Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Link: https://lkml.kernel.org/r/20220520174248.4918-1-kristen@linux.intel.com 02 June 2022, 17:58:47 UTC
638696e Merge branch 'net-af_packet-be-careful-when-expanding-mac-header-size' Eric Dumazet says: ==================== net: af_packet: be careful when expanding mac header size A recent regression in af_packet needed a preliminary debug patch, which will presumably be useful for next bugs hunting. The af_packet fix is to make sure MAC headers are contained in skb linear part, as GSO stack requests. v2: CONFIG_DEBUG_NET depends on CONFIG_NET to avoid compile errors found by kernel bots. ==================== Link: https://lore.kernel.org/r/20220602161859.2546399-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 02 June 2022, 17:15:07 UTC
e9d3f80 net/af_packet: make sure to pull mac header GSO assumes skb->head contains link layer headers. tun device in some case can provide base 14 bytes, regardless of VLAN being used or not. After blamed commit, we can end up setting a network header offset of 18+, we better pull the missing bytes to avoid a posible crash in GSO. syzbot report was: kernel BUG at include/linux/skbuff.h:2699! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 3601 Comm: syz-executor210 Not tainted 5.18.0-syzkaller-11338-g2c5ca23f7414 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__skb_pull include/linux/skbuff.h:2699 [inline] RIP: 0010:skb_mac_gso_segment+0x48f/0x530 net/core/gro.c:136 Code: 00 48 c7 c7 00 96 d4 8a c6 05 cb d3 45 06 01 e8 26 bb d0 01 e9 2f fd ff ff 49 c7 c4 ea ff ff ff e9 f1 fe ff ff e8 91 84 19 fa <0f> 0b 48 89 df e8 97 44 66 fa e9 7f fd ff ff e8 ad 44 66 fa e9 48 RSP: 0018:ffffc90002e2f4b8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000012 RCX: 0000000000000000 RDX: ffff88805bb58000 RSI: ffffffff8760ed0f RDI: 0000000000000004 RBP: 0000000000005dbc R08: 0000000000000004 R09: 0000000000000fe0 R10: 0000000000000fe4 R11: 0000000000000000 R12: 0000000000000fe0 R13: ffff88807194d780 R14: 1ffff920005c5e9b R15: 0000000000000012 FS: 000055555730f300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200015c0 CR3: 0000000071ff8000 CR4: 0000000000350ee0 Call Trace: <TASK> __skb_gso_segment+0x327/0x6e0 net/core/dev.c:3411 skb_gso_segment include/linux/netdevice.h:4749 [inline] validate_xmit_skb+0x6bc/0xf10 net/core/dev.c:3669 validate_xmit_skb_list+0xbc/0x120 net/core/dev.c:3719 sch_direct_xmit+0x3d1/0xbe0 net/sched/sch_generic.c:327 __dev_xmit_skb net/core/dev.c:3815 [inline] __dev_queue_xmit+0x14a1/0x3a00 net/core/dev.c:4219 packet_snd net/packet/af_packet.c:3071 [inline] packet_sendmsg+0x21cb/0x5550 net/packet/af_packet.c:3102 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f4b95da06c9 Code: 28 c3 e8 4a 15 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd7defc4c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffd7defc4f0 RCX: 00007f4b95da06c9 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000003 RBP: 0000000000000003 R08: bb1414ac00000050 R09: bb1414ac00000050 R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffd7defc4e0 R14: 00007ffd7defc4d8 R15: 00007ffd7defc4d4 </TASK> Fixes: dfed913e8b55 ("net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 02 June 2022, 17:15:05 UTC
22296a5 net: add debug info to __skb_pull() While analyzing yet another syzbot report, I found the following patch very useful. It allows to better understand what went wrong. This debug info is only enabled if CONFIG_DEBUG_NET=y, which is the case for syzbot builds. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 02 June 2022, 17:15:05 UTC
eb0b39e net: CONFIG_DEBUG_NET depends on CONFIG_NET It makes little sense to debug networking stacks if networking is not compiled in. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> 02 June 2022, 17:15:05 UTC
83450bb stmmac: intel: Add RPL-P PCI ID Add PCI ID for Ethernet TSN Controller on RPL-P. Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Link: https://lore.kernel.org/r/20220602073507.3955721-1-michael.wei.hong.sit@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 02 June 2022, 17:14:43 UTC
839612d net: stmmac: use dev_err_probe() for reporting mdio bus registration failure I have a board where these two lines are always printed during boot: imx-dwmac 30bf0000.ethernet: Cannot register the MDIO bus imx-dwmac 30bf0000.ethernet: stmmac_dvr_probe: MDIO bus (id: 1) registration failed It's perfectly fine, and the device is successfully (and silently, as far as the console goes) probed later. Use dev_err_probe() instead, which will demote these messages to debug level (thus removing the alarming messages from the console) when the error is -EPROBE_DEFER, and also has the advantage of including the error code if/when it happens to be something other than -EPROBE_DEFER. While here, add the missing \n to one of the format strings. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220602074840.1143360-1-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org> 02 June 2022, 17:14:30 UTC
7f36f79 tipc: check attribute length for bearer name syzbot reported uninit-value: ===================================================== BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:644 [inline] BUG: KMSAN: uninit-value in string+0x4f9/0x6f0 lib/vsprintf.c:725 string_nocheck lib/vsprintf.c:644 [inline] string+0x4f9/0x6f0 lib/vsprintf.c:725 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806 vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158 vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256 vprintk_default+0x86/0xa0 kernel/printk/printk.c:2283 vprintk+0x15f/0x180 kernel/printk/printk_safe.c:50 _printk+0x18d/0x1cf kernel/printk/printk.c:2293 tipc_enable_bearer net/tipc/bearer.c:371 [inline] __tipc_nl_bearer_enable+0x2022/0x22a0 net/tipc/bearer.c:1033 tipc_nl_bearer_enable+0x6c/0xb0 net/tipc/bearer.c:1042 genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline] - Do sanity check the attribute length for TIPC_NLA_BEARER_NAME. - Do not use 'illegal name' in printing message. Reported-by: syzbot+e820fdc8ce362f2dea51@syzkaller.appspotmail.com Fixes: cb30a63384bc ("tipc: refactor function tipc_enable_bearer()") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20220602063053.5892-1-hoang.h.le@dektech.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org> 02 June 2022, 17:14:24 UTC
17d8e3d Merge tag 'ceph-for-5.19-rc1' of https://github.com/ceph/ceph-client Pull ceph updates from Ilya Dryomov: "A big pile of assorted fixes and improvements for the filesystem with nothing in particular standing out, except perhaps that the fact that the MDS never really maintained atime was made official and thus it's no longer updated on the client either. We also have a MAINTAINERS update: Jeff is transitioning his filesystem maintainership duties to Xiubo" * tag 'ceph-for-5.19-rc1' of https://github.com/ceph/ceph-client: (23 commits) MAINTAINERS: move myself from ceph "Maintainer" to "Reviewer" ceph: fix decoding of client session messages flags ceph: switch TASK_INTERRUPTIBLE to TASK_KILLABLE ceph: remove redundant variable ino ceph: try to queue a writeback if revoking fails ceph: fix statfs for subdir mounts ceph: fix possible deadlock when holding Fwb to get inline_data ceph: redirty the page for writepage on failure ceph: try to choose the auth MDS if possible for getattr ceph: disable updating the atime since cephfs won't maintain it ceph: flush the mdlog for filesystem sync ceph: rename unsafe_request_wait() libceph: use swap() macro instead of taking tmp variable ceph: fix statx AT_STATX_DONT_SYNC vs AT_STATX_FORCE_SYNC check ceph: no need to invalidate the fscache twice ceph: replace usage of found with dedicated list iterator variable ceph: use dedicated list iterator variable ceph: update the dlease for the hashed dentry when removing ceph: stop retrying the request when exceeding 256 times ceph: stop forwarding the request when exceeding 256 times ... 02 June 2022, 15:59:39 UTC
7c9e960 Merge tag 'livepatching-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching cleanup from Petr Mladek: - Remove duplicated livepatch code [Christophe] * tag 'livepatching-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Remove klp_arch_set_pc() and asm/livepatch.h 02 June 2022, 15:55:01 UTC
12831f6 Merge tag 'printk-for-5.19-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fixup from Petr Mladek: - Revert inappropriate use of wake_up_interruptible_all() in printk() * tag 'printk-for-5.19-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: Revert "printk: wake up all waiters" 02 June 2022, 15:49:54 UTC
8cc5b03 binder: fix sender_euid type in uapi header The {pid,uid}_t fields of struct binder_transaction were recently replaced to use kernel types in commit 169adc2b6b3c ("android/binder.h: add linux/android/binder(fs).h to UAPI compile-test coverage"). However, using __kernel_uid_t here breaks backwards compatibility in architectures using 16-bits for this type, since glibc and some others still expect a 32-bit uid_t. Instead, let's use __kernel_uid32_t which avoids this compatibility problem. Fixes: 169adc2b6b3c ("android/binder.h: add linux/android/binder(fs).h to UAPI compile-test coverage") Reported-by: Christopher Ferris <cferris@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Acked-by: Todd Kjos <tkjos@google.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 02 June 2022, 15:47:25 UTC
ca1dcc6 Merge tag 'memblock-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock test suite updates from Mike Rapoport: "Comment updates for memblock test suite Update comments in the memblock tests so that they will have consistent style" * tag 'memblock-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock tests: remove completed TODO item memblock tests: update style of comments for memblock_free_*() functions memblock tests: update style of comments for memblock_remove_*() functions memblock tests: update style of comments for memblock_reserve_*() functions memblock tests: update style of comments for memblock_add_*() functions 02 June 2022, 15:46:30 UTC
690b254 i2c: ismt: prevent memory corruption in ismt_access() The "data->block[0]" variable comes from the user and is a number between 0-255. It needs to be capped to prevent writing beyond the end of dma_buffer[]. Fixes: 5e9a97b1f449 ("i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL") Reported-and-tested-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2022, 15:40:56 UTC
3cbcff6 sparc: fix mis-use of __kernel_{uid,gid}_t in uapi/asm/stat.h Commit 31a088b664d6 ("sparc: add asm/stat.h to UAPI compile-test coverage") converted as follows: uid_t --> __kernel_uid_t gid_t --> __kernel_gid_t It changed the field widths of struct stat because Sparc uses 16-bits for ___kernel_{uid,gid}_t as in arch/sparc/include/uapi/asm/posix_types.h. The safe replacements across all architectures are: uid_t --> __kernel_uid32_t gid_t --> __kernel_gid32_t as defined in include/linux/types.h. A similar issue was reported for the android binder. [1] [1]: https://lore.kernel.org/all/20220601010017.2639048-1-cmllamas@google.com/ Fixes: 31a088b664d6 ("sparc: add asm/stat.h to UAPI compile-test coverage") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 02 June 2022, 15:38:15 UTC
d39e061 powerpc: use __kernel_{uid,gid}32_t in uapi/asm/stat.h Commit c01013a2f8dd ("powerpc: add asm/stat.h to UAPI compile-test coverage") converted as follows: uid_t --> __kernel_uid_t gid_t --> __kernel_gid_t The bit width of __kernel_{uid,gid}_t is 16 or 32-bits depending on architectures. PPC uses 32-bits for them as in include/uapi/asm-generic/posix_types.h, so the previous conversion is probably fine, but let's stick to the arch-independent conversion just in case. The safe replacements across all architectures are: uid_t --> __kernel_uid32_t gid_t --> __kernel_gid32_t as defined in include/linux/types.h. A similar issue was reported for the android binder. [1] [1]: https://lore.kernel.org/all/20220601010017.2639048-1-cmllamas@google.com/ Fixes: c01013a2f8dd ("powerpc: add asm/stat.h to UAPI compile-test coverage") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 02 June 2022, 15:38:15 UTC
6cd6356 mips: use __kernel_{uid,gid}32_t in uapi/asm/stat.h Commit 8c1a381a4fbb ("mips: add asm/stat.h to UAPI compile-test coverage") converted as follows: uid_t --> __kernel_uid_t gid_t --> __kernel_gid_t The bit width of __kernel_{uid,gid}_t is 16 or 32-bits depending on architectures. MIPS uses 32-bits for them as in include/uapi/asm-generic/posix_types.h, so the previous conversion is probably fine, but let's stick to the arch-independent conversion just in case. The safe replacements across all architectures are: uid_t --> __kernel_uid32_t gid_t --> __kernel_gid32_t as defined in include/linux/types.h. A similar issue was reported for the android binder. [1] [1]: https://lore.kernel.org/all/20220601010017.2639048-1-cmllamas@google.com/ Fixes: 8c1a381a4fbb ("mips: add asm/stat.h to UAPI compile-test coverage") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 02 June 2022, 15:38:15 UTC
fe3f70e dt-bindings: PCI: apple: Add missing 'power-domains' property The 'unevaluatedProperties' schema checks is not fully working and doesn't catch some cases where there's a $ref to another schema. A fix is pending, but results in new warnings in examples. The Apple PCIe host schema is missing 'power-domains' in the schema. The example has 3 power domains. However, this is wrong too as actual dts files have a single power domain and Sven confirmed 1 is correct. Cc: Sven Peter <sven@svenpeter.dev> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20220531215815.2408477-1-robh@kernel.org 02 June 2022, 15:08:47 UTC
f5f1a97 dt-bindings: Update Sibi Sankar's email address Update email address to the quicinc.com domain. Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1654130923-18722-1-git-send-email-quic_sibis@quicinc.com 02 June 2022, 14:42:02 UTC
304e4d5 dt-bindings: clock: Update my email address Update my email address from the defunct codeaurora.org domain to the current quicinc.com domain. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1654118992-4026-1-git-send-email-quic_jhugo@quicinc.com 02 June 2022, 14:39:52 UTC
5dad4ec dt-bindings: timestamp: Correct id path During the repository renaming from hte to timestamp, $id path was not updated accordingly. This patch corrects $id path. Fixes: af583852d2ef ("dt-bindings: Renamed hte directory to timestamp") Signed-off-by: Dipen Patel <dipenp@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> 02 June 2022, 13:56:59 UTC
aacae8c block: null_blk: Fix null_zone_write() The bio and rq fields of struct nullb_cmd are now overlapping in a union. So we cannot use a test on ->bio being non-NULL to detect the NULL_Q_BIO queue mode. null_zone_write() use such broken test to set the sector position of a zone append write in the command bio or request. When the null_blk device uses the NULL_Q_MQ queue mode, null_zone_write() wrongly end up setting the bio sector position, resulting in the command request to be broken and random crashes following. Fix this by testing the device queue mode directly. Fixes: 8ba816b23abd ("null-blk: save memory footprint for struct nullb_cmd") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220602120344.1365329-1-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 02 June 2022, 13:11:28 UTC
1bec877 arm64: Remove the __user annotation for the restore_za_context() argument The struct user_ctx *user pointer passed to restore_za_context() is not a user point but a structure containing several __user pointers. Remove the __user annotation. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: 39782210eb7e ("arm64/sme: Implement ZA signal handling") Reported-by: kernel test robot <lkp@intel.com> Cc: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220601171338.2143625-1-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 02 June 2022, 10:55:29 UTC
6e1ff61 ice: fix access-beyond-end in the switch code Global `-Warray-bounds` enablement revealed some problems, one of which is the way we define and use AQC rules messages. In fact, they have a shared header, followed by the actual message, which can be of one of several different formats. So it is straightforward enough to define that header as a separate struct and then embed it into message structures as needed, but currently all the formats reside in one union coupled with the header. Then, the code allocates only the memory needed for a particular message format, leaving the union potentially incomplete. There are no actual reads or writes beyond the end of an allocated chunk, but at the same time, the whole implementation is fragile and backed by an equilibrium rather than strong type and memory checks. Define the structures the other way around: one for the common header and the rest for the actual formats with the header embedded. There are no places where several union members would be used at the same time anyway. This allows to use proper struct_size() and let the compiler know what is going to be done. Finally, unsilence `-Warray-bounds` back for ice_switch.c. Other little things worth mentioning: * &ice_sw_rule_vsi_list_query is not used anywhere, remove it. It's weird anyway to talk to hardware with purely kernel types (bitmaps); * expand the ICE_SW_RULE_*_SIZE() macros to pass a structure variable name to struct_size() to let it do strict typechecking; * rename ice_sw_rule_lkup_rx_tx::hdr to ::hdr_data to keep ::hdr for the header structure to have the same name for it constistenly everywhere; * drop the duplicate of %ICE_SW_RULE_RX_TX_NO_HDR_SIZE residing in ice_switch.h. Fixes: 9daf8208dd4d ("ice: Add support for switch filter programming") Fixes: 66486d8943ba ("ice: replace single-element array used for C struct hack") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220601105924.2841410-1-alexandr.lobakin@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 02 June 2022, 10:41:10 UTC
c6fbbf1 nfp: remove padding in nfp_nfdk_tx_desc NFDK firmware supports 48-bit dma addressing and parses 16 high bits of dma addresses. In nfp_nfdk_tx_desc, dma related structure and tso related structure are union. When "mss" be filled with nonzero value due to enable tso, the memory used by "padding" may be also filled. Then, firmware may parse wrong dma addresses which causes TX watchdog timeout problem. This patch removes padding and unifies the dma_addr_hi bits with the one in firmware. nfp_nfdk_tx_desc_set_dma_addr is also added to match this change. Fixes: c10d12e3dce8 ("nfp: add support for NFDK data path") Signed-off-by: Fei Qin <fei.qin@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220601083449.50556-1-simon.horman@corigine.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 02 June 2022, 09:08:43 UTC
7d8a3a4 ax25: Fix ax25 session cleanup problems There are session cleanup problems in ax25_release() and ax25_disconnect(). If we setup a session and then disconnect, the disconnected session is still in "LISTENING" state that is shown below. Active AX.25 sockets Dest Source Device State Vr/Vs Send-Q Recv-Q DL9SAU-4 DL9SAU-3 ??? LISTENING 000/000 0 0 DL9SAU-3 DL9SAU-4 ??? LISTENING 000/000 0 0 The first reason is caused by del_timer_sync() in ax25_release(). The timers of ax25 are used for correct session cleanup. If we use ax25_release() to close ax25 sessions and ax25_dev is not null, the del_timer_sync() functions in ax25_release() will execute. As a result, the sessions could not be cleaned up correctly, because the timers have stopped. In order to solve this problem, this patch adds a device_up flag in ax25_dev in order to judge whether the device is up. If there are sessions to be cleaned up, the del_timer_sync() in ax25_release() will not execute. What's more, we add ax25_cb_del() in ax25_kill_by_device(), because the timers have been stopped and there are no functions that could delete ax25_cb if we do not call ax25_release(). Finally, we reorder the position of ax25_list_lock in ax25_cb_del() in order to synchronize among different functions that call ax25_cb_del(). The second reason is caused by improper check in ax25_disconnect(). The incoming ax25 sessions which ax25->sk is null will close heartbeat timer, because the check "if(!ax25->sk || ..)" is satisfied. As a result, the session could not be cleaned up properly. In order to solve this problem, this patch changes the improper check to "if(ax25->sk && ..)" in ax25_disconnect(). What`s more, the ax25_disconnect() may be called twice, which is not necessary. For example, ax25_kill_by_device() calls ax25_disconnect() and sets ax25->state to AX25_STATE_0, but ax25_release() calls ax25_disconnect() again. In order to solve this problem, this patch add a check in ax25_release(). If the flag of ax25->sk equals to SOCK_DEAD, the ax25_disconnect() in ax25_release() should not be executed. Fixes: 82e31755e55f ("ax25: Fix UAF bugs in ax25 timers") Fixes: 8a367e74c012 ("ax25: Fix segfault after sock connection timeout") Reported-and-tested-by: Thomas Osterried <thomas@osterried.de> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220530152158.108619-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com> 02 June 2022, 08:37:57 UTC
22b106e block: fix bio_clone_blkg_association() to associate with proper blkcg_gq Commit d92c370a16cb ("block: really clone the block cgroup in bio_clone_blkg_association") changed bio_clone_blkg_association() to just clone bio->bi_blkg reference from source to destination bio. This is however wrong if the source and destination bios are against different block devices because struct blkcg_gq is different for each bdev-blkcg pair. This will result in IOs being accounted (and throttled as a result) multiple times against the same device (src bdev) while throttling of the other device (dst bdev) is ignored. In case of BFQ the inconsistency can even result in crashes in bfq_bic_update_cgroup(). Fix the problem by looking up correct blkcg_gq for the cloned bio. Reported-by: Logan Gunthorpe <logang@deltatee.com> Reported-and-tested-by: Donald Buczek <buczek@molgen.mpg.de> Fixes: d92c370a16cb ("block: really clone the block cgroup in bio_clone_blkg_association") CC: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220602081242.7731-1-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk> 02 June 2022, 08:15:05 UTC
ff47dbd block: remove useless BUG_ON() in blk_mq_put_tag() Since the if condition in blk_mq_put_tag() checks that the tag to put is not a reserved one, the BUG_ON() check in the else branch checking if the tag is indeed a reserved one is useless. Remove it. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20220602075159.1273366-1-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 02 June 2022, 08:05:56 UTC
c9fdf7b Merge tag 'nvme-5.19-2022-06-02' of git://git.infradead.org/nvme into for-5.19/drivers Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.19 - set controller enable bit in a separate write (Niklas Cassel) - disable namespace identifiers for the MAXIO MAP1001 (me) - fix a comment typo (Julia Lawall)" * tag 'nvme-5.19-2022-06-02' of git://git.infradead.org/nvme: nvmet: fix typo in comment nvme: set controller enable bit in a separate write nvme-pci: disable namespace identifiers for the MAXIO MAP1001 02 June 2022, 07:48:35 UTC
7bb8a0c gpio: adp5588: Remove support for platform setup and teardown callbacks If the teardown callback failed in the gpio driver, it fails to free the irq (if there is one). The device is removed anyhow. If later on the irq triggers, all sorts of unpleasant things might happen (e.g. accessing the struct adp5588_gpio which is already freed in the meantime or starting i2c bus transfers for an unregistered device). Even before irq support was added to this driver, exiting early was wrong; back then it failed to unregister the gpiochip. Fortunately these callbacks aren't used any more since at least blackfin was removed in 2018. So just drop them. Note that they are not removed from struct adp5588_gpio_platform_data because the keyboard driver adp5588-keys.c also makes use of them. (I didn't check if the callbacks might have been called twice, maybe there is another reason hidden to better not call these functions.) This patch is a preparation for making i2c remove callbacks return void. Fixes: 80884094e344 ("gpio: adp5588-gpio: new driver for ADP5588 GPIO expanders") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> 02 June 2022, 07:17:38 UTC
9cae36a io_uring: reinstate the inflight tracking After some debugging, it was realized that we really do still need the old inflight tracking for any file type that has io_uring_fops assigned. If we don't, then trivial circular references will mean that we never get the ctx cleaned up and hence it'll leak. Just bring back the inflight tracking, which then also means we can eliminate the conditional dropping of the file when task_work is queued. Fixes: d5361233e9ab ("io_uring: drop the old style inflight file tracking") Signed-off-by: Jens Axboe <axboe@kernel.dk> 02 June 2022, 05:57:02 UTC
9eb2e45 riscv: move errata/ and kvm/ builds to arch/riscv/Kbuild Commit 909548d6c578 ("riscv: add arch/riscv/Kbuild") intended that subdirectories in arch/riscv/ would be added in arch/riscv/Kbuild. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 02 June 2022, 05:26:32 UTC
e61bf5c RISC-V: Mark IORESOURCE_EXCLUSIVE for reserved mem instead of IORESOURCE_BUSY Commit 00ab027a3b82 ("RISC-V: Add kernel image sections to the resource tree") marked IORESOURCE_BUSY for reserved memory, which caused resource map failed in subsequent operations of related driver, so remove the IORESOURCE_BUSY flag. In order to prohibit userland mapping reserved memory, mark IORESOURCE_EXCLUSIVE for it. The code to reproduce the issue, dts: mem0: memory@a0000000 { reg = <0x0 0xa0000000 0 0x1000000>; no-map; }; &test { status = "okay"; memory-region = <&mem0>; }; code: np = of_parse_phandle(pdev->dev.of_node, "memory-region", 0); ret = of_address_to_resource(np, 0, &r); base = devm_ioremap_resource(&pdev->dev, &r); // base = -EBUSY Fixes: 00ab027a3b82 ("RISC-V: Add kernel image sections to the resource tree") Reported-by: Huaming Jiang <jianghuaming.jhm@alibaba-inc.com> Reviewed-by: Guo Ren <guoren@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Co-developed-by: Nick Kossifidis <mick@ics.forth.gr> Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Link: https://lore.kernel.org/r/20220518013428.1338983-1-xianting.tian@linux.alibaba.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 02 June 2022, 05:03:50 UTC
02d88b4 riscv: Wire up memfd_secret in UAPI header Move the __ARCH_WANT_MEMFD_SECRET define added in commit 7bb7f2ac24a0 ("arch, mm: wire up memfd_secret system call where relevant") to <uapi/asm/unistd.h> so __NR_memfd_secret is defined when including <unistd.h> in userspace. This allows the memfd_secret selftest to pass on riscv. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Link: https://lore.kernel.org/r/20220505081815.22808-1-tklauser@distanz.ch Fixes: 7bb7f2ac24a0 ("arch, mm: wire up memfd_secret system call where relevant") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 02 June 2022, 04:46:36 UTC
2273272 riscv: Fix irq_work when SMP is disabled irq_work is triggered via an IPI, but the IPI infrastructure is not included in uniprocessor kernels. As a result, irq_work never runs. Fall back to the tick-based irq_work implementation on uniprocessor configurations. Fixes: 298447928bb1 ("riscv: Support irq_work via self IPIs") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220430030025.58405-1-samuel@sholland.org Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 02 June 2022, 04:46:31 UTC
26b8f69 riscv: Improve virtual kernel memory layout dump With the arrival of sv48 and its large address space, it would be cumbersome to statically define the unit size to use to print the different portions of the virtual memory layout: instead, determine it dynamically. Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 02 June 2022, 04:46:29 UTC
35d33c7 riscv: Initialize thread pointer before calling C functions Because of the stack canary feature that reads from the current task structure the stack canary value, the thread pointer register "tp" must be set before calling any C function from head.S: by chance, setup_vm and all the functions that it calls does not seem to be part of the functions where the canary check is done, but in the following commits, some functions will. Fixes: f2c9699f65557a31 ("riscv: Add STACKPROTECTOR supported") Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 02 June 2022, 04:46:23 UTC
096c956 cifs: update internal module number To 2.37 Signed-off-by: Steve French <stfrench@microsoft.com> 02 June 2022, 04:23:09 UTC
9d19f2b Documentation: riscv: Add sv48 description to VM layout sv48 was just introduced, so add its virtual memory layout to the documentation. Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> 02 June 2022, 03:38:34 UTC
7ef93ff cifs: version operations for smb20 unneeded when legacy support disabled We should not be including unused smb20 specific code when legacy support is disabled (CONFIG_CIFS_ALLOW_INSECURE_LEGACY turned off). For example smb2_operations and smb2_values aren't used in that case. Over time we can move more and more SMB1/CIFS and SMB2.0 code into the insecure legacy ifdefs Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> 02 June 2022, 03:30:36 UTC
387ba9b cifs: do not build smb1ops if legacy support is disabled We should not be including unused SMB1/CIFS functions when legacy support is disabled (CONFIG_CIFS_ALLOW_INSECURE_LEGACY turned off), but especially obvious is not needing to build smb1ops.c at all when legacy support is disabled. Over time we can move more SMB1/CIFS and SMB2.0 legacy functions into ifdefs but this is a good start (and shrinks the module size a few percent). Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> 02 June 2022, 02:49:27 UTC
aa2a4de scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter The ql_dm_tgt_ex_pct parameter was introduced in commit ead038556f64 ("qla2xxx: Add Dual mode support in the driver"). Then the use of this parameter was dropped in commit 99e1b683c4be ("scsi: qla2xxx: Add ql2xiniexchg parameter"). Thus, remove ql_dm_tgt_ex_pct since it is no longer used. Link: https://lore.kernel.org/r/AM9PR10MB41185ADE95B92B4E6926BE639DD49@AM9PR10MB4118.EURPRD10.PROD.OUTLOOK.COM Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 02 June 2022, 02:48:37 UTC
e250bd2 scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters cppcheck reports [drivers/scsi/qla2xxx/qla_mid.c:594]: (warning) Assignment of function parameter has no effect outside the function. Did you forget dereferencing it? [drivers/scsi/qla2xxx/qla_mid.c:620]: (warning) Assignment of function parameter has no effect outside the function. Did you forget dereferencing it? The functions qla25xx_free_req_que() and qla25xx_free_rsp_que() are similar. They free a 'req' and a 'rsp' parameter respectively. The last statement of both functions is setting the parameter to NULL. This has no effect and can be removed. Link: https://lore.kernel.org/r/20220521201607.4145298-1-trix@redhat.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 02 June 2022, 02:46:11 UTC
1fcbe4c scsi: mpi3mr: Fix kernel-doc Fix the following W=1 kernel warnings: drivers/scsi/mpi3mr/mpi3mr_app.c:1706: warning: expecting prototype for adapter_state_show(). Prototype was for adp_state_show() instead. Link: https://lore.kernel.org/r/20220525093514.55467-1-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 02 June 2022, 02:43:26 UTC
a5b168e scsi: lpfc: Add support for ATTO Fibre Channel devices Update pci_device_id table and generate reporting strings for ATTO Celerity and ThunderLink Fibre Channel devices. Link: https://lore.kernel.org/r/20220524125621.47102-1-bgrove@attotech.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: James Smart <jsmart2021@gmail.com> Co-developed-by: Jason Seba <jseba@attotech.com> Signed-off-by: Jason Seba <jseba@attotech.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 02 June 2022, 02:40:59 UTC
b3bc1a8 scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning When the 'ALUA state transitioning' sense code is returned we cannot use BLK_STS_AGAIN, as this has a very specific use-case. So return BLK_STS_TRANSPORT here. Link: https://lore.kernel.org/r/20220524055631.85480-3-hare@suse.de Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 02 June 2022, 02:38:53 UTC
back to top