Skip to main content

Browse the archive

https://github.com/torvalds/linux
27 March 2024, 02:37:15 UTC
sort by:
Revision Author Date Message Commit Date
95a9359 Peter Ujfalusi 17 May 2023, 12:29:31 UTC tpm: tpm_tis: Disable interrupts for AEON UPX-i11 Interrupts got recently enabled for tpm_tis. The interrupts initially works on the device but they will stop arriving after circa ~200 interrupts. On system reboot/shutdown this will cause a long wait (120000 jiffies). [jarkko@kernel.org: fix a merge conflict and adjust the commit message] Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> 23 May 2023, 23:50:23 UTC
27e462c Linus Torvalds 23 May 2023, 22:21:34 UTC Merge tag 'xtensa-20230523' of https://github.com/jcmvbkbc/linux-xtensa Pull Xtensa fixes from Max Filippov: - fix signal delivery to FDPIC process - add __bswap{si,di}2 helpers * tag 'xtensa-20230523' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: add __bswap{si,di}2 helpers xtensa: fix signal delivery to FDPIC process 23 May 2023, 22:21:34 UTC
011a871 Maxim Kochetkov 12 May 2023, 11:03:42 UTC ASoC: dwc: move DMA init to snd_soc_dai_driver probe() When using DMA mode we are facing with Oops: [ 396.458157] Unable to handle kernel access to user memory without uaccess routines at virtual address 000000000000000c [ 396.469374] Oops [#1] [ 396.471839] Modules linked in: [ 396.475144] CPU: 0 PID: 114 Comm: arecord Not tainted 6.0.0-00164-g9a8eccdaf2be-dirty #68 [ 396.483619] Hardware name: YMP ELCT FPGA (DT) [ 396.488156] epc : dmaengine_pcm_open+0x1d2/0x342 [ 396.493227] ra : dmaengine_pcm_open+0x1d2/0x342 [ 396.498140] epc : ffffffff807fe346 ra : ffffffff807fe346 sp : ffffffc804e138f0 [ 396.505602] gp : ffffffff817bf730 tp : ffffffd8042c8ac0 t0 : 6500000000000000 [ 396.513045] t1 : 0000000000000064 t2 : 656e69676e65616d s0 : ffffffc804e13990 [ 396.520477] s1 : ffffffd801b86a18 a0 : 0000000000000026 a1 : ffffffff816920f8 [ 396.527897] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000 [ 396.535319] a5 : 0000000000000000 a6 : ffffffd801b87040 a7 : 0000000000000038 [ 396.542740] s2 : ffffffd801b94a00 s3 : 0000000000000000 s4 : ffffffd80427f5e8 [ 396.550153] s5 : ffffffd80427f5e8 s6 : ffffffd801b44410 s7 : fffffffffffffff5 [ 396.557569] s8 : 0000000000000800 s9 : 0000000000000001 s10: ffffffff8066d254 [ 396.564978] s11: ffffffd8059cf768 t3 : ffffffff817d5577 t4 : ffffffff817d5577 [ 396.572391] t5 : ffffffff817d5578 t6 : ffffffc804e136e8 [ 396.577876] status: 0000000200000120 badaddr: 000000000000000c cause: 000000000000000d [ 396.586007] [<ffffffff806839f4>] snd_soc_component_open+0x1a/0x68 [ 396.592439] [<ffffffff807fdd62>] __soc_pcm_open+0xf0/0x502 [ 396.598217] [<ffffffff80685d86>] soc_pcm_open+0x2e/0x4e [ 396.603741] [<ffffffff8066cea4>] snd_pcm_open_substream+0x442/0x68e [ 396.610313] [<ffffffff8066d1ea>] snd_pcm_open+0xfa/0x212 [ 396.615868] [<ffffffff8066d39c>] snd_pcm_capture_open+0x3a/0x60 [ 396.622048] [<ffffffff8065b35a>] snd_open+0xa8/0x17a [ 396.627421] [<ffffffff801ae036>] chrdev_open+0xa0/0x218 [ 396.632893] [<ffffffff801a5a28>] do_dentry_open+0x17c/0x2a6 [ 396.638713] [<ffffffff801a6d9a>] vfs_open+0x1e/0x26 [ 396.643850] [<ffffffff801b8544>] path_openat+0x96e/0xc96 [ 396.649518] [<ffffffff801b9390>] do_filp_open+0x7c/0xf6 [ 396.655034] [<ffffffff801a6ff2>] do_sys_openat2+0x8a/0x11e [ 396.660765] [<ffffffff801a735a>] sys_openat+0x50/0x7c [ 396.666068] [<ffffffff80003aca>] ret_from_syscall+0x0/0x2 [ 396.674964] ---[ end trace 0000000000000000 ]--- It happens because of play_dma_data/capture_dma_data pointers are NULL. Current implementation assigns these pointers at snd_soc_dai_driver startup() callback and reset them back to NULL at shutdown(). But soc_pcm_open() sequence uses DMA pointers in dmaengine_pcm_open() before snd_soc_dai_driver startup(). Most generic DMA capable I2S drivers use snd_soc_dai_driver probe() callback to init DMA pointers only once at probe. So move DMA init to dw_i2s_dai_probe and drop shutdown() and startup() callbacks. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Link: https://lore.kernel.org/r/20230512110343.66664-1-fido_max@inbox.ru Signed-off-by: Mark Brown <broonie@kernel.org> 23 May 2023, 20:39:30 UTC
4ef4aee David Howells 23 May 2023, 12:48:41 UTC cifs: Fix cifs_limit_bvec_subset() to correctly check the maxmimum size Fix cifs_limit_bvec_subset() so that it limits the span to the maximum specified and won't return with a size greater than max_size. Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list") Cc: stable@vger.kernel.org # 6.3 Reported-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <smfrench@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Paulo Alcantara <pc@manguebit.com> cc: Tom Talpey <tom@talpey.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> 23 May 2023, 20:35:44 UTC
4752354 Yan Zhao 19 May 2023, 06:58:43 UTC vfio/type1: check pfn valid before converting to struct page Check physical PFN is valid before converting the PFN to a struct page pointer to be returned to caller of vfio_pin_pages(). vfio_pin_pages() pins user pages with contiguous IOVA. If the IOVA of a user page to be pinned belongs to vma of vm_flags VM_PFNMAP, pin_user_pages_remote() will return -EFAULT without returning struct page address for this PFN. This is because usually this kind of PFN (e.g. MMIO PFN) has no valid struct page address associated. Upon this error, vaddr_get_pfns() will obtain the physical PFN directly. While previously vfio_pin_pages() returns to caller PFN arrays directly, after commit 34a255e67615 ("vfio: Replace phys_pfn with pages for vfio_pin_pages()"), PFNs will be converted to "struct page *" unconditionally and therefore the returned "struct page *" array may contain invalid struct page addresses. Given current in-tree users of vfio_pin_pages() only expect "struct page * returned, check PFN validity and return -EINVAL to let the caller be aware of IOVAs to be pinned containing PFN not able to be returned in "struct page *" array. So that, the caller will not consume the returned pointer (e.g. test PageReserved()) and avoid error like "supervisor read access in kernel mode". Fixes: 34a255e67615 ("vfio: Replace phys_pfn with pages for vfio_pin_pages()") Cc: Sean Christopherson <seanjc@google.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20230519065843.10653-1-yan.y.zhao@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> 23 May 2023, 20:16:29 UTC
e2d035f Stefan Binding 14 April 2023, 15:25:51 UTC ASoC: cs35l41: Fix default regmap values for some registers Several values do not match the defaults of CS35L41, fix them. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230414152552.574502-4-sbinding@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> 23 May 2023, 18:10:45 UTC
5fe326b Linus Torvalds 23 May 2023, 17:47:32 UTC Merge tag 'erofs-for-6.4-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: "One patch addresses a null-ptr-deref issue reported by syzbot weeks ago, which is caused by the new long xattr name prefix feature and needs to be fixed. The remaining two patches are minor cleanups to avoid unnecessary compilation and adjust per-cpu kworker configuration. Summary: - Fix null-ptr-deref related to long xattr name prefixes - Avoid pcpubuf compilation if CONFIG_EROFS_FS_ZIP is off - Use high priority kthreads by default if per-cpu kthread workers are enabled" * tag 'erofs-for-6.4-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: use HIPRI by default if per-cpu kthreads are enabled erofs: avoid pcpubuf.c inclusion if CONFIG_EROFS_FS_ZIP is off erofs: fix null-ptr-deref caused by erofs_xattr_prefixes_init 23 May 2023, 17:47:32 UTC
46930b7 Anuj Gupta 23 May 2023, 11:17:09 UTC block: fix bio-cache for passthru IO commit <8af870aa5b847> ("block: enable bio caching use for passthru IO") introduced bio-cache for passthru IO. In case when nr_vecs are greater than BIO_INLINE_VECS, bio and bvecs are allocated from mempool (instead of percpu cache) and REQ_ALLOC_CACHE is cleared. This causes the side effect of not freeing bio/bvecs into mempool on completion. This patch lets the passthru IO fallback to allocation using bio_kmalloc when nr_vecs are greater than BIO_INLINE_VECS. The corresponding bio is freed during call to blk_mq_map_bio_put during completion. Cc: stable@vger.kernel.org # 6.1 fixes <8af870aa5b847> ("block: enable bio caching use for passthru IO") Signed-off-by: Anuj Gupta <anuj20.g@samsung.com> Signed-off-by: Kanchan Joshi <joshi.k@samsung.com> Link: https://lore.kernel.org/r/20230523111709.145676-1-anuj20.g@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 23 May 2023, 17:11:29 UTC
da8d2fe Paolo Valente 23 May 2023, 09:17:24 UTC block, bfq: update Paolo's address in maintainer list Current email address of Paolo Valente is no longer valid, use a good one. Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Link: https://lore.kernel.org/r/20230523091724.26636-1-paolo.valente@unimore.it Signed-off-by: Jens Axboe <axboe@kernel.dk> 23 May 2023, 17:10:54 UTC
3e94d54 Tian Lan 22 May 2023, 21:05:55 UTC blk-mq: fix race condition in active queue accounting If multiple CPUs are sharing the same hardware queue, it can cause leak in the active queue counter tracking when __blk_mq_tag_busy() is executed simultaneously. Fixes: ee78ec1077d3 ("blk-mq: blk_mq_tag_busy is no need to return a value") Signed-off-by: Tian Lan <tian.lan@twosigma.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20230522210555.794134-1-tilan7663@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 23 May 2023, 17:10:16 UTC
8a2b20a Yu Kuai 22 May 2023, 12:18:54 UTC blk-wbt: fix that wbt can't be disabled by default commit b11d31ae01e6 ("blk-wbt: remove unnecessary check in wbt_enable_default()") removes the checking of CONFIG_BLK_WBT_MQ by mistake, which is used to control enable or disable wbt by default. Fix the problem by adding back the checking. This patch also do a litter cleanup to make related code more readable. Fixes: b11d31ae01e6 ("blk-wbt: remove unnecessary check in wbt_enable_default()") Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/lkml/CAKXUXMzfKq_J9nKHGyr5P5rvUETY4B-fxoQD4sO+NYjFOfVtZA@mail.gmail.com/t/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230522121854.2928880-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 23 May 2023, 17:08:53 UTC
b6405f0 Helge Deller 19 May 2023, 10:12:06 UTC parisc: Use num_present_cpus() in alternative patching code When patching the kernel code some alternatives depend on SMP vs. !SMP. Use the value of num_present_cpus() instead of num_online_cpus() to decide, otherwise we may run into issues if and additional CPU is enabled after having loaded a module while only one CPU was enabled. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v6.1+ 23 May 2023, 16:17:32 UTC
e997c21 Jeffrey Hugo 17 May 2023, 19:35:40 UTC accel/qaic: Fix NNC message corruption If msg_xfer() is unable to queue part of a NNC message because the MHI ring is full, it will attempt to give the QSM some time to drain the queue. However, if QSM fails to make any room, msg_xfer() will fail and tell the caller to try again. This is problematic because part of the message may have been committed to the ring and there is no mechanism to revoke that content. This will cause QSM to receive a corrupt message. The better way to do this is to check if the ring has enough space for the entire message before committing any of the message. Since msg_xfer() is under the cntl_mutex no one else can come in and consume the space. Fixes: 129776ac2e38 ("accel/qaic: Add control path") Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517193540.14323-6-quic_jhugo@quicinc.com 23 May 2023, 15:51:38 UTC
75af0a5 Pranjal Ramajor Asha Kanojiya 17 May 2023, 19:35:39 UTC accel/qaic: Grab ch_lock during QAIC_ATTACH_SLICE_BO During QAIC_ATTACH_SLICE_BO, we associate a BO to its DBC. We need to grab the dbc->ch_lock to make sure that DBC does not goes away while QAIC_ATTACH_SLICE_BO is still running. Fixes: ff13be830333 ("accel/qaic: Add datapath") Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517193540.14323-5-quic_jhugo@quicinc.com 23 May 2023, 15:51:06 UTC
faa7c4e Pranjal Ramajor Asha Kanojiya 17 May 2023, 19:35:38 UTC accel/qaic: Flush the transfer list again Before calling synchronize_srcu() we clear the transfer list, this is to allow all the QAIC_WAIT_BO callers to exit otherwise the system could deadlock. There could be a corner case where more elements get added to transfer list after we have flushed it. Re-flush the transfer list once all the holders of dbc->ch_lock have completed execution i.e. synchronize_srcu() is complete. Fixes: ff13be830333 ("accel/qaic: Add datapath") Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517193540.14323-4-quic_jhugo@quicinc.com 23 May 2023, 15:50:33 UTC
2e0904e Pranjal Ramajor Asha Kanojiya 17 May 2023, 19:35:37 UTC accel/qaic: Validate if BO is sliced before slicing QAIC_ATTACH_SLICE_BO attaches slicing configuration to a BO. Validate if given BO is already sliced. An already sliced BO cannot be sliced again. Fixes: ff13be830333 ("accel/qaic: Add datapath") Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517193540.14323-3-quic_jhugo@quicinc.com 23 May 2023, 15:48:19 UTC
d3b277b Pranjal Ramajor Asha Kanojiya 17 May 2023, 19:35:36 UTC accel/qaic: Validate user data before grabbing any lock Validating user data does not need to be protected by any lock and it is safe to move it out of critical region. Fixes: ff13be830333 ("accel/qaic: Add datapath") Fixes: 129776ac2e38 ("accel/qaic: Add control path") Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517193540.14323-2-quic_jhugo@quicinc.com 23 May 2023, 15:47:10 UTC
0e163e5 Tom Rix 17 May 2023, 16:56:05 UTC accel/qaic: initialize ret variable to 0 clang static analysis reports drivers/accel/qaic/qaic_data.c:610:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return ret; ^~~~~~~~~~ From a code analysis of the function, the ret variable is only set some of the time but is always returned. This suggests ret can return uninitialized garbage. However BO allocation will ensure ret is always set in reality. Initialize ret to 0 to silence the warning. Fixes: ff13be830333 ("accel/qaic: Add datapath") Signed-off-by: Tom Rix <trix@redhat.com> [jhugo: Reword commit text] Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230517165605.16770-1-quic_jhugo@quicinc.com 23 May 2023, 15:43:11 UTC
f726e03 John Fastabend 23 May 2023, 02:56:18 UTC bpf, sockmap: Test progs verifier error with latest clang With a relatively recent clang (7090c10273119) and with this commit to fix warnings in selftests (c8ed668593972) that uses __sink(err) to resolve unused variables. We get the following verifier error. root@6e731a24b33a:/host/tools/testing/selftests/bpf# ./test_sockmap libbpf: prog 'bpf_sockmap': BPF program load failed: Permission denied libbpf: prog 'bpf_sockmap': -- BEGIN PROG LOAD LOG -- 0: R1=ctx(off=0,imm=0) R10=fp0 ; op = (int) skops->op; 0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) ; switch (op) { 1: (16) if w2 == 0x4 goto pc+5 ; R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) 2: (56) if w2 != 0x5 goto pc+15 ; R2_w=5 ; lport = skops->local_port; 3: (61) r2 = *(u32 *)(r1 +68) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) ; if (lport == 10000) { 4: (56) if w2 != 0x2710 goto pc+13 18: R1=ctx(off=0,imm=0) R2=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 ; __sink(err); 18: (bc) w1 = w0 R0 !read_ok processed 18 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1 -- END PROG LOAD LOG -- libbpf: prog 'bpf_sockmap': failed to load: -13 libbpf: failed to load object 'test_sockmap_kern.bpf.o' load_bpf_file: (-1) No such file or directory ERROR: (-1) load bpf failed libbpf: prog 'bpf_sockmap': BPF program load failed: Permission denied libbpf: prog 'bpf_sockmap': -- BEGIN PROG LOAD LOG -- 0: R1=ctx(off=0,imm=0) R10=fp0 ; op = (int) skops->op; 0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) ; switch (op) { 1: (16) if w2 == 0x4 goto pc+5 ; R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) 2: (56) if w2 != 0x5 goto pc+15 ; R2_w=5 ; lport = skops->local_port; 3: (61) r2 = *(u32 *)(r1 +68) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) ; if (lport == 10000) { 4: (56) if w2 != 0x2710 goto pc+13 18: R1=ctx(off=0,imm=0) R2=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 ; __sink(err); 18: (bc) w1 = w0 R0 !read_ok processed 18 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1 -- END PROG LOAD LOG -- libbpf: prog 'bpf_sockmap': failed to load: -13 libbpf: failed to load object 'test_sockhash_kern.bpf.o' load_bpf_file: (-1) No such file or directory ERROR: (-1) load bpf failed libbpf: prog 'bpf_sockmap': BPF program load failed: Permission denied libbpf: prog 'bpf_sockmap': -- BEGIN PROG LOAD LOG -- 0: R1=ctx(off=0,imm=0) R10=fp0 ; op = (int) skops->op; 0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) ; switch (op) { 1: (16) if w2 == 0x4 goto pc+5 ; R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) 2: (56) if w2 != 0x5 goto pc+15 ; R2_w=5 ; lport = skops->local_port; 3: (61) r2 = *(u32 *)(r1 +68) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) ; if (lport == 10000) { 4: (56) if w2 != 0x2710 goto pc+13 18: R1=ctx(off=0,imm=0) R2=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0 ; __sink(err); 18: (bc) w1 = w0 R0 !read_ok processed 18 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1 -- END PROG LOAD LOG -- To fix simply remove the err value because its not actually used anywhere in the testing. We can investigate the root cause later. Future patch should probably actually test the err value as well. Although if the map updates fail they will get caught eventually by userspace. Fixes: c8ed668593972 ("selftests/bpf: fix lots of silly mistakes pointed out by compiler") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-15-john.fastabend@gmail.com 23 May 2023, 14:11:27 UTC
80e24d2 John Fastabend 23 May 2023, 02:56:17 UTC bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops When BPF program drops pkts the sockmap logic 'eats' the packet and updates copied_seq. In the PASS case where the sk_buff is accepted we update copied_seq from recvmsg path so we need a new test to handle the drop case. Original patch series broke this resulting in test_sockmap_skb_verdict_fionread:PASS:ioctl(FIONREAD) error 0 nsec test_sockmap_skb_verdict_fionread:FAIL:ioctl(FIONREAD) unexpected ioctl(FIONREAD): actual 1503041772 != expected 256 After updated patch with fix. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-14-john.fastabend@gmail.com 23 May 2023, 14:11:20 UTC
bb516f9 John Fastabend 23 May 2023, 02:56:16 UTC bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer A bug was reported where ioctl(FIONREAD) returned zero even though the socket with a SK_SKB verdict program attached had bytes in the msg queue. The result is programs may hang or more likely try to recover, but use suboptimal buffer sizes. Add a test to check that ioctl(FIONREAD) returns the correct number of bytes. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-13-john.fastabend@gmail.com 23 May 2023, 14:11:13 UTC
1fa1fe8 John Fastabend 23 May 2023, 02:56:15 UTC bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0 When session gracefully shutdowns epoll needs to wake up and any recv() readers should return 0 not the -EAGAIN they previously returned. Note we use epoll instead of select to test the epoll wake on shutdown event as well. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-12-john.fastabend@gmail.com 23 May 2023, 14:11:05 UTC
298970c John Fastabend 23 May 2023, 02:56:14 UTC bpf, sockmap: Build helper to create connected socket pair A common operation for testing is to spin up a pair of sockets that are connected. Then we can use these to run specific tests that need to send data, check BPF programs and so on. The sockmap_listen programs already have this logic lets move it into the new sockmap_helpers header file for general use. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-11-john.fastabend@gmail.com 23 May 2023, 14:10:58 UTC
4e02588 John Fastabend 23 May 2023, 02:56:13 UTC bpf, sockmap: Pull socket helpers out of listen test for general use No functional change here we merely pull the helpers in sockmap_listen.c into a header file so we can use these in other programs. The tests we are about to add aren't really _listen tests so doesn't make sense to add them here. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-10-john.fastabend@gmail.com 23 May 2023, 14:10:50 UTC
e5c6de5 John Fastabend 23 May 2023, 02:56:12 UTC bpf, sockmap: Incorrectly handling copied_seq The read_skb() logic is incrementing the tcp->copied_seq which is used for among other things calculating how many outstanding bytes can be read by the application. This results in application errors, if the application does an ioctl(FIONREAD) we return zero because this is calculated from the copied_seq value. To fix this we move tcp->copied_seq accounting into the recv handler so that we update these when the recvmsg() hook is called and data is in fact copied into user buffers. This gives an accurate FIONREAD value as expected and improves ACK handling. Before we were calling the tcp_rcv_space_adjust() which would update 'number of bytes copied to user in last RTT' which is wrong for programs returning SK_PASS. The bytes are only copied to the user when recvmsg is handled. Doing the fix for recvmsg is straightforward, but fixing redirect and SK_DROP pkts is a bit tricker. Build a tcp_psock_eat() helper and then call this from skmsg handlers. This fixes another issue where a broken socket with a BPF program doing a resubmit could hang the receiver. This happened because although read_skb() consumed the skb through sock_drop() it did not update the copied_seq. Now if a single reccv socket is redirecting to many sockets (for example for lb) the receiver sk will be hung even though we might expect it to continue. The hang comes from not updating the copied_seq numbers and memory pressure resulting from that. We have a slight layer problem of calling tcp_eat_skb even if its not a TCP socket. To fix we could refactor and create per type receiver handlers. I decided this is more work than we want in the fix and we already have some small tweaks depending on caller that use the helper skb_bpf_strparser(). So we extend that a bit and always set the strparser bit when it is in use and then we can gate the seq_copied updates on this. Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-9-john.fastabend@gmail.com 23 May 2023, 14:10:42 UTC
6df7f76 John Fastabend 23 May 2023, 02:56:11 UTC bpf, sockmap: Wake up polling after data copy When TCP stack has data ready to read sk_data_ready() is called. Sockmap overwrites this with its own handler to call into BPF verdict program. But, the original TCP socket had sock_def_readable that would additionally wake up any user space waiters with sk_wake_async(). Sockmap saved the callback when the socket was created so call the saved data ready callback and then we can wake up any epoll() logic waiting on the read. Note we call on 'copied >= 0' to account for returning 0 when a FIN is received because we need to wake up user for this as well so they can do the recvmsg() -> 0 and detect the shutdown. Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-8-john.fastabend@gmail.com 23 May 2023, 14:10:35 UTC
ea44418 John Fastabend 23 May 2023, 02:56:10 UTC bpf, sockmap: TCP data stall on recv before accept A common mechanism to put a TCP socket into the sockmap is to hook the BPF_SOCK_OPS_{ACTIVE_PASSIVE}_ESTABLISHED_CB event with a BPF program that can map the socket info to the correct BPF verdict parser. When the user adds the socket to the map the psock is created and the new ops are assigned to ensure the verdict program will 'see' the sk_buffs as they arrive. Part of this process hooks the sk_data_ready op with a BPF specific handler to wake up the BPF verdict program when data is ready to read. The logic is simple enough (posted here for easy reading) static void sk_psock_verdict_data_ready(struct sock *sk) { struct socket *sock = sk->sk_socket; if (unlikely(!sock || !sock->ops || !sock->ops->read_skb)) return; sock->ops->read_skb(sk, sk_psock_verdict_recv); } The oversight here is sk->sk_socket is not assigned until the application accepts() the new socket. However, its entirely ok for the peer application to do a connect() followed immediately by sends. The socket on the receiver is sitting on the backlog queue of the listening socket until its accepted and the data is queued up. If the peer never accepts the socket or is slow it will eventually hit data limits and rate limit the session. But, important for BPF sockmap hooks when this data is received TCP stack does the sk_data_ready() call but the read_skb() for this data is never called because sk_socket is missing. The data sits on the sk_receive_queue. Then once the socket is accepted if we never receive more data from the peer there will be no further sk_data_ready calls and all the data is still on the sk_receive_queue(). Then user calls recvmsg after accept() and for TCP sockets in sockmap we use the tcp_bpf_recvmsg_parser() handler. The handler checks for data in the sk_msg ingress queue expecting that the BPF program has already run from the sk_data_ready hook and enqueued the data as needed. So we are stuck. To fix do an unlikely check in recvmsg handler for data on the sk_receive_queue and if it exists wake up data_ready. We have the sock locked in both read_skb and recvmsg so should avoid having multiple runners. Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-7-john.fastabend@gmail.com 23 May 2023, 14:10:28 UTC
901546f John Fastabend 23 May 2023, 02:56:09 UTC bpf, sockmap: Handle fin correctly The sockmap code is returning EAGAIN after a FIN packet is received and no more data is on the receive queue. Correct behavior is to return 0 to the user and the user can then close the socket. The EAGAIN causes many apps to retry which masks the problem. Eventually the socket is evicted from the sockmap because its released from sockmap sock free handling. The issue creates a delay and can cause some errors on application side. To fix this check on sk_msg_recvmsg side if length is zero and FIN flag is set then set return to zero. A selftest will be added to check this condition. Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: William Findlay <will@isovalent.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-6-john.fastabend@gmail.com 23 May 2023, 14:10:18 UTC
405df89 John Fastabend 23 May 2023, 02:56:08 UTC bpf, sockmap: Improved check for empty queue We noticed some rare sk_buffs were stepping past the queue when system was under memory pressure. The general theory is to skip enqueueing sk_buffs when its not necessary which is the normal case with a system that is properly provisioned for the task, no memory pressure and enough cpu assigned. But, if we can't allocate memory due to an ENOMEM error when enqueueing the sk_buff into the sockmap receive queue we push it onto a delayed workqueue to retry later. When a new sk_buff is received we then check if that queue is empty. However, there is a problem with simply checking the queue length. When a sk_buff is being processed from the ingress queue but not yet on the sockmap msg receive queue its possible to also recv a sk_buff through normal path. It will check the ingress queue which is zero and then skip ahead of the pkt being processed. Previously we used sock lock from both contexts which made the problem harder to hit, but not impossible. To fix instead of popping the skb from the queue entirely we peek the skb from the queue and do the copy there. This ensures checks to the queue length are non-zero while skb is being processed. Then finally when the entire skb has been copied to user space queue or another socket we pop it off the queue. This way the queue length check allows bypassing the queue only after the list has been completely processed. To reproduce issue we run NGINX compliance test with sockmap running and observe some flakes in our testing that we attributed to this issue. Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()") Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: William Findlay <will@isovalent.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-5-john.fastabend@gmail.com 23 May 2023, 14:10:11 UTC
bce2255 John Fastabend 23 May 2023, 02:56:07 UTC bpf, sockmap: Reschedule is now done through backlog Now that the backlog manages the reschedule() logic correctly we can drop the partial fix to reschedule from recvmsg hook. Rescheduling on recvmsg hook was added to address a corner case where we still had data in the backlog state but had nothing to kick it and reschedule the backlog worker to run and finish copying data out of the state. This had a couple limitations, first it required user space to kick it introducing an unnecessary EBUSY and retry. Second it only handled the ingress case and egress redirects would still be hung. With the correct fix, pushing the reschedule logic down to where the enomem error occurs we can drop this fix. Fixes: bec217197b412 ("skmsg: Schedule psock work if the cached skb exists on the psock") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-4-john.fastabend@gmail.com 23 May 2023, 14:10:04 UTC
29173d0 John Fastabend 23 May 2023, 02:56:06 UTC bpf, sockmap: Convert schedule_work into delayed_work Sk_buffs are fed into sockmap verdict programs either from a strparser (when the user might want to decide how framing of skb is done by attaching another parser program) or directly through tcp_read_sock. The tcp_read_sock is the preferred method for performance when the BPF logic is a stream parser. The flow for Cilium's common use case with a stream parser is, tcp_read_sock() sk_psock_verdict_recv ret = bpf_prog_run_pin_on_cpu() sk_psock_verdict_apply(sock, skb, ret) // if system is under memory pressure or app is slow we may // need to queue skb. Do this queuing through ingress_skb and // then kick timer to wake up handler skb_queue_tail(ingress_skb, skb) schedule_work(work); The work queue is wired up to sk_psock_backlog(). This will then walk the ingress_skb skb list that holds our sk_buffs that could not be handled, but should be OK to run at some later point. However, its possible that the workqueue doing this work still hits an error when sending the skb. When this happens the skbuff is requeued on a temporary 'state' struct kept with the workqueue. This is necessary because its possible to partially send an skbuff before hitting an error and we need to know how and where to restart when the workqueue runs next. Now for the trouble, we don't rekick the workqueue. This can cause a stall where the skbuff we just cached on the state variable might never be sent. This happens when its the last packet in a flow and no further packets come along that would cause the system to kick the workqueue from that side. To fix we could do simple schedule_work(), but while under memory pressure it makes sense to back off some instead of continue to retry repeatedly. So instead to fix convert schedule_work to schedule_delayed_work and add backoff logic to reschedule from backlog queue on errors. Its not obvious though what a good backoff is so use '1'. To test we observed some flakes whil running NGINX compliance test with sockmap we attributed these failed test to this bug and subsequent issue. >From on list discussion. This commit bec217197b41("skmsg: Schedule psock work if the cached skb exists on the psock") was intended to address similar race, but had a couple cases it missed. Most obvious it only accounted for receiving traffic on the local socket so if redirecting into another socket we could still get an sk_buff stuck here. Next it missed the case where copied=0 in the recv() handler and then we wouldn't kick the scheduler. Also its sub-optimal to require userspace to kick the internal mechanisms of sockmap to wake it up and copy data to user. It results in an extra syscall and requires the app to actual handle the EAGAIN correctly. Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: William Findlay <will@isovalent.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-3-john.fastabend@gmail.com 23 May 2023, 14:09:56 UTC
78fa0d6 John Fastabend 23 May 2023, 02:56:05 UTC bpf, sockmap: Pass skb ownership through read_skb The read_skb hook calls consume_skb() now, but this means that if the recv_actor program wants to use the skb it needs to inc the ref cnt so that the consume_skb() doesn't kfree the sk_buff. This is problematic because in some error cases under memory pressure we may need to linearize the sk_buff from sk_psock_skb_ingress_enqueue(). Then we get this, skb_linearize() __pskb_pull_tail() pskb_expand_head() BUG_ON(skb_shared(skb)) Because we incremented users refcnt from sk_psock_verdict_recv() we hit the bug on with refcnt > 1 and trip it. To fix lets simply pass ownership of the sk_buff through the skb_read call. Then we can drop the consume from read_skb handlers and assume the verdict recv does any required kfree. Bug found while testing in our CI which runs in VMs that hit memory constraints rather regularly. William tested TCP read_skb handlers. [ 106.536188] ------------[ cut here ]------------ [ 106.536197] kernel BUG at net/core/skbuff.c:1693! [ 106.536479] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 106.536726] CPU: 3 PID: 1495 Comm: curl Not tainted 5.19.0-rc5 #1 [ 106.537023] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.16.0-1 04/01/2014 [ 106.537467] RIP: 0010:pskb_expand_head+0x269/0x330 [ 106.538585] RSP: 0018:ffffc90000138b68 EFLAGS: 00010202 [ 106.538839] RAX: 000000000000003f RBX: ffff8881048940e8 RCX: 0000000000000a20 [ 106.539186] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff8881048940e8 [ 106.539529] RBP: ffffc90000138be8 R08: 00000000e161fd1a R09: 0000000000000000 [ 106.539877] R10: 0000000000000018 R11: 0000000000000000 R12: ffff8881048940e8 [ 106.540222] R13: 0000000000000003 R14: 0000000000000000 R15: ffff8881048940e8 [ 106.540568] FS: 00007f277dde9f00(0000) GS:ffff88813bd80000(0000) knlGS:0000000000000000 [ 106.540954] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 106.541227] CR2: 00007f277eeede64 CR3: 000000000ad3e000 CR4: 00000000000006e0 [ 106.541569] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 106.541915] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 106.542255] Call Trace: [ 106.542383] <IRQ> [ 106.542487] __pskb_pull_tail+0x4b/0x3e0 [ 106.542681] skb_ensure_writable+0x85/0xa0 [ 106.542882] sk_skb_pull_data+0x18/0x20 [ 106.543084] bpf_prog_b517a65a242018b0_bpf_skskb_http_verdict+0x3a9/0x4aa9 [ 106.543536] ? migrate_disable+0x66/0x80 [ 106.543871] sk_psock_verdict_recv+0xe2/0x310 [ 106.544258] ? sk_psock_write_space+0x1f0/0x1f0 [ 106.544561] tcp_read_skb+0x7b/0x120 [ 106.544740] tcp_data_queue+0x904/0xee0 [ 106.544931] tcp_rcv_established+0x212/0x7c0 [ 106.545142] tcp_v4_do_rcv+0x174/0x2a0 [ 106.545326] tcp_v4_rcv+0xe70/0xf60 [ 106.545500] ip_protocol_deliver_rcu+0x48/0x290 [ 106.545744] ip_local_deliver_finish+0xa7/0x150 Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()") Reported-by: William Findlay <will@isovalent.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: William Findlay <will@isovalent.com> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20230523025618.113937-2-john.fastabend@gmail.com 23 May 2023, 14:09:47 UTC
3632679 Nicolas Dichtel 22 May 2023, 12:08:20 UTC ipv{4,6}/raw: fix output xfrm lookup wrt protocol With a raw socket bound to IPPROTO_RAW (ie with hdrincl enabled), the protocol field of the flow structure, build by raw_sendmsg() / rawv6_sendmsg()), is set to IPPROTO_RAW. This breaks the ipsec policy lookup when some policies are defined with a protocol in the selector. For ipv6, the sin6_port field from 'struct sockaddr_in6' could be used to specify the protocol. Just accept all values for IPPROTO_RAW socket. For ipv4, the sin_port field of 'struct sockaddr_in' could not be used without breaking backward compatibility (the value of this field was never checked). Let's add a new kind of control message, so that the userland could specify which protocol is used. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") CC: stable@vger.kernel.org Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20230522120820.1319391-1-nicolas.dichtel@6wind.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 23 May 2023, 13:38:59 UTC
6007612 Horatiu Vultur 22 May 2023, 12:00:38 UTC lan966x: Fix unloading/loading of the driver It was noticing that after a while when unloading/loading the driver and sending traffic through the switch, it would stop working. It would stop forwarding any traffic and the only way to get out of this was to do a power cycle of the board. The root cause seems to be that the switch core is initialized twice. Apparently initializing twice the switch core disturbs the pointers in the queue systems in the HW, so after a while it would stop sending the traffic. Unfortunetly, it is not possible to use a reset of the switch here, because the reset line is connected to multiple devices like MDIO, SGPIO, FAN, etc. So then all the devices will get reseted when the network driver will be loaded. So the fix is to check if the core is initialized already and if that is the case don't initialize it again. Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230522120038.3749026-1-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> 23 May 2023, 11:01:06 UTC
3279dec David Arcari 23 May 2023, 10:54:00 UTC platform/x86/intel/ifs: Annotate work queue on stack so object debug does not complain Object Debug results in the following warning while attempting to load ifs firmware: [ 220.007422] ODEBUG: object 000000003bf952db is on stack 00000000e843994b, but NOT annotated. [ 220.007459] ------------[ cut here ]------------ [ 220.007461] WARNING: CPU: 0 PID: 11774 at lib/debugobjects.c:548 __debug_object_init.cold+0x22e/0x2d5 [ 220.137476] RIP: 0010:__debug_object_init.cold+0x22e/0x2d5 [ 220.254774] Call Trace: [ 220.257641] <TASK> [ 220.265606] scan_chunks_sanity_check+0x368/0x5f0 [intel_ifs] [ 220.288292] ifs_load_firmware+0x2a3/0x400 [intel_ifs] [ 220.332793] current_batch_store+0xea/0x160 [intel_ifs] [ 220.357947] kernfs_fop_write_iter+0x355/0x530 [ 220.363048] new_sync_write+0x28e/0x4a0 [ 220.381226] vfs_write+0x62a/0x920 [ 220.385160] ksys_write+0xf9/0x1d0 [ 220.399421] do_syscall_64+0x59/0x90 [ 220.440635] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 220.566845] ---[ end trace 3a01b299db142b41 ]--- Correct this by calling INIT_WORK_ONSTACK instead of INIT_WORK. Fixes: 684ec215706d ("platform/x86/intel/ifs: Authenticate and copy to secured memory") Signed-off-by: David Arcari <darcari@redhat.com> Cc: Jithu Joseph <jithu.joseph@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <markgross@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230523105400.674152-1-darcari@redhat.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 23 May 2023, 10:55:16 UTC
bbb320b Steve Wahl 19 May 2023, 16:04:20 UTC platform/x86: ISST: Remove 8 socket limit Stop restricting the PCI search to a range of PCI domains fed to pci_get_domain_bus_and_slot(). Instead, use for_each_pci_dev() and look at all PCI domains in one pass. On systems with more than 8 sockets, this avoids error messages like "Information: Invalid level, Can't get TDP control information at specified levels on cpu 480" from the intel speed select utility. Fixes: aa2ddd242572 ("platform/x86: ISST: Use numa node id for cpu pci dev mapping") Signed-off-by: Steve Wahl <steve.wahl@hpe.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230519160420.2588475-1-steve.wahl@hpe.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> 23 May 2023, 10:52:05 UTC
4897a89 Liviu Dudau 09 May 2023, 17:29:21 UTC mips: Move initrd_start check after initrd address sanitisation. PAGE_OFFSET is technically a virtual address so when checking the value of initrd_start against it we should make sure that it has been sanitised from the values passed by the bootloader. Without this change, even with a bootloader that passes correct addresses for an initrd, we are failing to load it on MT7621 boards, for example. Signed-off-by: Liviu Dudau <liviu@dudau.co.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 23 May 2023, 09:01:38 UTC
2d64560 Manuel Lauss 11 May 2023, 15:30:10 UTC MIPS: Alchemy: fix dbdma2 Various fixes for the Au1200/Au1550/Au1300 DBDMA2 code: - skip cache invalidation if chip has working coherency circuitry. - invalidate KSEG0-portion of the (physical) data address. - force the dma channel doorbell write out to bus immediately with a sync. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 23 May 2023, 09:00:02 UTC
f204170 Manuel Lauss 10 May 2023, 10:33:23 UTC MIPS: Restore Au1300 support The Au1300, at least the one I have to test, uses the NetLogic vendor ID, but commit 95b8a5e0111a ("MIPS: Remove NETLOGIC support") also dropped Au1300 detection. Restore Au1300 detection. Tested on DB1300 with Au1380 chip. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 23 May 2023, 08:59:29 UTC
75b18aa Manuel Lauss 09 May 2023, 18:57:44 UTC MIPS: unhide PATA_PLATFORM Alchemy DB1200/DB1300 boards can use the pata_platform driver. Unhide the config entry in all of MIPS. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> 23 May 2023, 08:59:07 UTC
cf7f273 Gao Xiang 22 May 2023, 09:21:41 UTC erofs: use HIPRI by default if per-cpu kthreads are enabled As Sandeep shown [1], high priority RT per-cpu kthreads are typically helpful for Android scenarios to minimize the scheduling latencies. Switch EROFS_FS_PCPU_KTHREAD_HIPRI on by default if EROFS_FS_PCPU_KTHREAD is on since it's the typical use cases for EROFS_FS_PCPU_KTHREAD. Also clean up unneeded sched_set_normal(). [1] https://lore.kernel.org/r/CAB=BE-SBtO6vcoyLNA9F-9VaN5R0t3o_Zn+FW8GbO6wyUqFneQ@mail.gmail.com Reviewed-by: Yue Hu <huyue2@coolpad.com> Reviewed-by: Sandeep Dhavale <dhavale@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20230522092141.124290-1-hsiangkao@linux.alibaba.com 23 May 2023, 08:57:08 UTC
285d0f8 Yue Hu 15 May 2023, 09:57:58 UTC erofs: avoid pcpubuf.c inclusion if CONFIG_EROFS_FS_ZIP is off The function of pcpubuf.c is just for low-latency decompression algorithms (e.g. lz4). Signed-off-by: Yue Hu <huyue2@coolpad.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20230515095758.10391-1-zbestahu@gmail.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> 23 May 2023, 08:56:40 UTC
0a17567 Jingbo Xu 15 May 2023, 10:39:41 UTC erofs: fix null-ptr-deref caused by erofs_xattr_prefixes_init Fragments and dedupe share one feature bit, and thus packed inode may not exist when fragment feature bit (dedupe feature bit exactly) is set, e.g. when deduplication feature is in use while fragments feature is not. In this case, sbi->packed_inode could be NULL while fragments feature bit is set. Fix this by accessing packed inode only when it exists. Reported-by: syzbot+902d5a9373ae8f748a94@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=902d5a9373ae8f748a94 Reported-and-tested-by: syzbot+bbb353775d51424087f2@syzkaller.appspotmail.com Fixes: 9e382914617c ("erofs: add helpers to load long xattr name prefixes") Fixes: 6a318ccd7e08 ("erofs: enable long extended attribute name prefixes") Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com> Reviewed-by: Yue Hu <huyue2@coolpad.com> Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20230515103941.129784-1-jefflexu@linux.alibaba.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> 23 May 2023, 08:56:21 UTC
3002b86 Henning Schild 27 April 2023, 15:20:55 UTC gpio-f7188x: fix chip name and pin count on Nuvoton chip In fact the device with chip id 0xD283 is called NCT6126D, and that is the chip id the Nuvoton code was written for. Correct that name to avoid confusion, because a NCT6116D in fact exists as well but has another chip id, and is currently not supported. The look at the spec also revealed that GPIO group7 in fact has 8 pins, so correct the pin count in that group as well. Fixes: d0918a84aff0 ("gpio-f7188x: Add GPIO support for Nuvoton NCT6116") Reported-by: Xing Tong Wu <xingtong.wu@siemens.com> Signed-off-by: Henning Schild <henning.schild@siemens.com> Acked-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> 23 May 2023, 08:47:41 UTC
3c84530 Like Xu 17 May 2023, 13:38:08 UTC perf/x86/intel: Save/restore cpuc->active_pebs_data_cfg when using guest PEBS After commit b752ea0c28e3 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG"), the cpuc->pebs_data_cfg may save some bits that are not supported by real hardware, such as PEBS_UPDATE_DS_SW. This would cause the VMX hardware MSR switching mechanism to save/restore invalid values for PEBS_DATA_CFG MSR, thus crashing the host when PEBS is used for guest. Fix it by using the active host value from cpuc->active_pebs_data_cfg. Fixes: b752ea0c28e3 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG") Signed-off-by: Like Xu <likexu@tencent.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20230517133808.67885-1-likexu@tencent.com 23 May 2023, 08:01:13 UTC
1da438c Shay Drory 17 April 2023, 07:57:50 UTC net/mlx5: Fix indexing of mlx5_irq After the cited patch, mlx5_irq xarray index can be different then mlx5_irq MSIX table index. Fix it by storing both mlx5_irq xarray index and MSIX table index. Fixes: 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 23 May 2023, 05:38:06 UTC
ef8c063 Shay Drory 16 April 2023, 05:54:04 UTC net/mlx5: Fix irq affinity management The cited patch deny the user of changing the affinity of mlx5 irqs, which break backward compatibility. Hence, allow the user to change the affinity of mlx5 irqs. Fixes: bbac70c74183 ("net/mlx5: Use newer affinity descriptor") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 23 May 2023, 05:38:06 UTC
9c2d080 Shay Drory 13 April 2023, 19:15:31 UTC net/mlx5: Free irqs only on shutdown callback Whenever a shutdown is invoked, free irqs only and keep mlx5_irq synthetic wrapper intact in order to avoid use-after-free on system shutdown. for example: ================================================================== BUG: KASAN: use-after-free in _find_first_bit+0x66/0x80 Read of size 8 at addr ffff88823fc0d318 by task kworker/u192:0/13608 CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1 Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_report+0x170/0x473 ? _find_first_bit+0x66/0x80 kasan_report+0xad/0x130 ? _find_first_bit+0x66/0x80 _find_first_bit+0x66/0x80 mlx5e_open_channels+0x3c5/0x3a10 [mlx5_core] ? console_unlock+0x2fa/0x430 ? _raw_spin_lock_irqsave+0x8d/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x80 ? preempt_count_add+0x7d/0x150 ? __wake_up_klogd.part.0+0x7d/0xc0 ? vprintk_emit+0xfe/0x2c0 ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core] ? dev_attr_show.cold+0x35/0x35 ? devlink_health_do_dump.part.0+0x174/0x340 ? devlink_health_report+0x504/0x810 ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] ? process_one_work+0x680/0x1050 mlx5e_safe_switch_params+0x156/0x220 [mlx5_core] ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core] ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core] mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core] ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0 devlink_health_reporter_recover+0xa6/0x1f0 devlink_health_report+0x2f7/0x810 ? vsnprintf+0x854/0x15e0 mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core] ? newidle_balance+0x9b7/0xe30 ? psi_group_change+0x6a7/0xb80 ? mutex_lock+0x96/0xf0 ? __mutex_lock_slowpath+0x10/0x10 mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] process_one_work+0x680/0x1050 worker_thread+0x5a0/0xeb0 ? process_one_work+0x1050/0x1050 kthread+0x2a2/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Freed by task 1: kasan_save_stack+0x23/0x50 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x169/0x1d0 slab_free_freelist_hook+0xd2/0x190 __kmem_cache_free+0x1a1/0x2f0 irq_pool_free+0x138/0x200 [mlx5_core] mlx5_irq_table_destroy+0xf6/0x170 [mlx5_core] mlx5_core_eq_free_irqs+0x74/0xf0 [mlx5_core] shutdown+0x194/0x1aa [mlx5_core] pci_device_shutdown+0x75/0x120 device_shutdown+0x35c/0x620 kernel_restart+0x60/0xa0 __do_sys_reboot+0x1cb/0x2c0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x4b/0xb5 The buggy address belongs to the object at ffff88823fc0d300 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 24 bytes inside of 192-byte region [ffff88823fc0d300, ffff88823fc0d3c0) The buggy address belongs to the physical page: page:0000000010139587 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x23fc0c head:0000000010139587 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) raw: 002ffff800010200 0000000000000000 dead000000000122 ffff88810004ca00 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88823fc0d200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88823fc0d280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff88823fc0d300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88823fc0d380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88823fc0d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== general protection fault, probably for non-canonical address 0xdffffc005c40d7ac: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: probably user-memory-access in range [0x00000002e206bd60-0x00000002e206bd67] CPU: 25 PID: 13608 Comm: kworker/u192:0 Tainted: G B W O 6.1.21-cloudflare-kasan-2023.3.21 #1 Hardware name: GIGABYTE R162-R2-GEN0/MZ12-HD2-CD, BIOS R14 05/03/2021 Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core] RIP: 0010:__alloc_pages+0x141/0x5c0 Call Trace: <TASK> ? sysvec_apic_timer_interrupt+0xa0/0xc0 ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? __alloc_pages_slowpath.constprop.0+0x1ec0/0x1ec0 ? _raw_spin_unlock_irqrestore+0x3d/0x80 __kmalloc_large_node+0x80/0x120 ? kvmalloc_node+0x4e/0x170 __kmalloc_node+0xd4/0x150 kvmalloc_node+0x4e/0x170 mlx5e_open_channels+0x631/0x3a10 [mlx5_core] ? console_unlock+0x2fa/0x430 ? _raw_spin_lock_irqsave+0x8d/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x80 ? preempt_count_add+0x7d/0x150 ? __wake_up_klogd.part.0+0x7d/0xc0 ? vprintk_emit+0xfe/0x2c0 ? mlx5e_trigger_napi_sched+0x40/0x40 [mlx5_core] ? dev_attr_show.cold+0x35/0x35 ? devlink_health_do_dump.part.0+0x174/0x340 ? devlink_health_report+0x504/0x810 ? mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] ? process_one_work+0x680/0x1050 mlx5e_safe_switch_params+0x156/0x220 [mlx5_core] ? mlx5e_switch_priv_channels+0x310/0x310 [mlx5_core] ? mlx5_eq_poll_irq_disabled+0xb6/0x100 [mlx5_core] mlx5e_tx_reporter_timeout_recover+0x123/0x240 [mlx5_core] ? __mutex_unlock_slowpath.constprop.0+0x2b0/0x2b0 devlink_health_reporter_recover+0xa6/0x1f0 devlink_health_report+0x2f7/0x810 ? vsnprintf+0x854/0x15e0 mlx5e_reporter_tx_timeout+0x29d/0x3a0 [mlx5_core] ? mlx5e_reporter_tx_err_cqe+0x1a0/0x1a0 [mlx5_core] ? mlx5e_tx_reporter_timeout_dump+0x50/0x50 [mlx5_core] ? mlx5e_tx_reporter_dump_sq+0x260/0x260 [mlx5_core] ? newidle_balance+0x9b7/0xe30 ? psi_group_change+0x6a7/0xb80 ? mutex_lock+0x96/0xf0 ? __mutex_lock_slowpath+0x10/0x10 mlx5e_tx_timeout_work+0x17c/0x230 [mlx5_core] process_one_work+0x680/0x1050 worker_thread+0x5a0/0xeb0 ? process_one_work+0x1050/0x1050 kthread+0x2a2/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:__alloc_pages+0x141/0x5c0 Code: e0 39 a3 96 89 e9 b8 22 01 32 01 83 e1 0f 48 89 fa 01 c9 48 c1 ea 03 d3 f8 83 e0 03 89 44 24 6c 48 b8 00 00 00 00 00 fc ff df <80> 3c 02 00 0f 85 fc 03 00 00 89 e8 4a 8b 14 f5 e0 39 a3 96 4c 89 RSP: 0018:ffff888251f0f438 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 1ffff1104a3e1e8b RCX: 0000000000000000 RDX: 000000005c40d7ac RSI: 0000000000000003 RDI: 00000002e206bd60 RBP: 0000000000052dc0 R08: ffff8882b0044218 R09: ffff8882b0045e8a R10: fffffbfff300fefc R11: ffff888167af4000 R12: 0000000000000003 R13: 0000000000000000 R14: 00000000696c7070 R15: ffff8882373f4380 FS: 0000000000000000(0000) GS:ffff88bf2be80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005641d031eee8 CR3: 0000002e7ca14000 CR4: 0000000000350ee0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x11000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]---] Reported-by: Frederick Lawler <fred@cloudflare.com> Link: https://lore.kernel.org/netdev/be5b9271-7507-19c5-ded1-fa78f1980e69@cloudflare.com Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 23 May 2023, 05:38:06 UTC
1f893f5 Shay Drory 02 May 2023, 10:36:42 UTC net/mlx5: Devcom, serialize devcom registration From one hand, mlx5 driver is allowing to probe PFs in parallel. From the other hand, devcom, which is a share resource between PFs, is registered without any lock. This might resulted in memory problems. Hence, use the global mlx5_dev_list_lock in order to serialize devcom registration. Fixes: fadd59fc50d0 ("net/mlx5: Introduce inter-device communication mechanism") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 23 May 2023, 05:38:06 UTC
af87194 Shay Drory 02 May 2023, 10:35:11 UTC net/mlx5: Devcom, fix error flow in mlx5_devcom_register_device In case devcom allocation is failed, mlx5 is always freeing the priv. However, this priv might have been allocated by a different thread, and freeing it might lead to use-after-free bugs. Fix it by freeing the priv only in case it was allocated by the running thread. Fixes: fadd59fc50d0 ("net/mlx5: Introduce inter-device communication mechanism") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 23 May 2023, 05:38:06 UTC
8c253df Shay Drory 06 February 2023, 09:52:02 UTC net/mlx5: E-switch, Devcom, sync devcom events and devcom comp register devcom events are sent to all registered component. Following the cited patch, it is possible for two components, e.g.: two eswitches, to send devcom events, while both components are registered. This means eswitch layer will do double un/pairing, which is double allocation and free of resources, even though only one un/pairing is needed. flow example: cpu0 cpu1 ---- ---- mlx5_devlink_eswitch_mode_set(dev0) esw_offloads_devcom_init() mlx5_devcom_register_component(esw0) mlx5_devlink_eswitch_mode_set(dev1) esw_offloads_devcom_init() mlx5_devcom_register_component(esw1) mlx5_devcom_send_event() mlx5_devcom_send_event() Hence, check whether the eswitches are already un/paired before free/allocation of resources. Fixes: 09b278462f16 ("net: devlink: enable parallel ops on netlink interface") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 23 May 2023, 05:38:06 UTC
dfa1e46 Paul Blakey 26 April 2023, 13:04:48 UTC net/mlx5e: TC, Fix using eswitch mapping in nic mode Cited patch is using the eswitch object mapping pool while in nic mode where it isn't initialized. This results in the trace below [0]. Fix that by using either nic or eswitch object mapping pool depending if eswitch is enabled or not. [0]: [ 826.446057] ================================================================== [ 826.446729] BUG: KASAN: slab-use-after-free in mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.447515] Read of size 8 at addr ffff888194485830 by task tc/6233 [ 826.448243] CPU: 16 PID: 6233 Comm: tc Tainted: G W 6.3.0-rc6+ #1 [ 826.448890] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 826.449785] Call Trace: [ 826.450052] <TASK> [ 826.450302] dump_stack_lvl+0x33/0x50 [ 826.450650] print_report+0xc2/0x610 [ 826.450998] ? __virt_addr_valid+0xb1/0x130 [ 826.451385] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.451935] kasan_report+0xae/0xe0 [ 826.452276] ? mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.452829] mlx5_add_flow_rules+0x30/0x490 [mlx5_core] [ 826.453368] ? __kmalloc_node+0x5a/0x120 [ 826.453733] esw_add_restore_rule+0x20f/0x270 [mlx5_core] [ 826.454288] ? mlx5_eswitch_add_send_to_vport_meta_rule+0x260/0x260 [mlx5_core] [ 826.455011] ? mutex_unlock+0x80/0xd0 [ 826.455361] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.455862] ? mapping_add+0x2cb/0x440 [mlx5_core] [ 826.456425] mlx5e_tc_action_miss_mapping_get+0x139/0x180 [mlx5_core] [ 826.457058] ? mlx5e_tc_update_skb_nic+0xb0/0xb0 [mlx5_core] [ 826.457636] ? __kasan_kmalloc+0x77/0x90 [ 826.458000] ? __kmalloc+0x57/0x120 [ 826.458336] mlx5_tc_ct_flow_offload+0x325/0xe40 [mlx5_core] [ 826.458916] ? ct_kernel_enter.constprop.0+0x48/0xa0 [ 826.459360] ? mlx5_tc_ct_parse_action+0xf0/0xf0 [mlx5_core] [ 826.459933] ? mlx5e_mod_hdr_attach+0x491/0x520 [mlx5_core] [ 826.460507] ? mlx5e_mod_hdr_get+0x12/0x20 [mlx5_core] [ 826.461046] ? mlx5e_tc_attach_mod_hdr+0x154/0x170 [mlx5_core] [ 826.461635] mlx5e_configure_flower+0x969/0x2110 [mlx5_core] [ 826.462217] ? _raw_spin_lock_bh+0x85/0xe0 [ 826.462597] ? __mlx5e_add_fdb_flow+0x750/0x750 [mlx5_core] [ 826.463163] ? kasan_save_stack+0x2e/0x40 [ 826.463534] ? down_read+0x115/0x1b0 [ 826.463878] ? down_write_killable+0x110/0x110 [ 826.464288] ? tc_setup_action.part.0+0x9f/0x3b0 [ 826.464701] ? mlx5e_is_uplink_rep+0x4c/0x90 [mlx5_core] [ 826.465253] ? mlx5e_tc_reoffload_flows_work+0x130/0x130 [mlx5_core] [ 826.465878] tc_setup_cb_add+0x112/0x250 [ 826.466247] fl_hw_replace_filter+0x230/0x310 [cls_flower] [ 826.466724] ? fl_hw_destroy_filter+0x1a0/0x1a0 [cls_flower] [ 826.467212] fl_change+0x14e1/0x2030 [cls_flower] [ 826.467636] ? sock_def_readable+0x89/0x120 [ 826.468019] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.468509] ? kasan_unpoison+0x23/0x50 [ 826.468873] ? get_random_u16+0x180/0x180 [ 826.469244] ? __radix_tree_lookup+0x2b/0x130 [ 826.469640] ? fl_get+0x7b/0x140 [cls_flower] [ 826.470042] ? fl_mask_put+0x200/0x200 [cls_flower] [ 826.470478] ? __mutex_unlock_slowpath.constprop.0+0x210/0x210 [ 826.470973] ? fl_tmplt_create+0x2d0/0x2d0 [cls_flower] [ 826.471427] tc_new_tfilter+0x644/0x1050 [ 826.471795] ? tc_get_tfilter+0x860/0x860 [ 826.472170] ? __thaw_task+0x130/0x130 [ 826.472525] ? arch_stack_walk+0x98/0xf0 [ 826.472892] ? cap_capable+0x9f/0xd0 [ 826.473235] ? security_capable+0x47/0x60 [ 826.473608] rtnetlink_rcv_msg+0x1d5/0x550 [ 826.473985] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.474383] ? __stack_depot_save+0x35/0x4c0 [ 826.474779] ? kasan_save_stack+0x2e/0x40 [ 826.475149] ? kasan_save_stack+0x1e/0x40 [ 826.475518] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.475939] ? task_work_add+0x77/0x1c0 [ 826.476305] netlink_rcv_skb+0xe0/0x210 [ 826.476661] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 826.477057] ? netlink_ack+0x7c0/0x7c0 [ 826.477412] ? rhashtable_jhash2+0xef/0x150 [ 826.477796] ? _copy_from_iter+0x105/0x770 [ 826.484386] netlink_unicast+0x346/0x490 [ 826.484755] ? netlink_attachskb+0x400/0x400 [ 826.485145] ? kernel_text_address+0xc2/0xd0 [ 826.485535] netlink_sendmsg+0x3b0/0x6c0 [ 826.485902] ? kernel_text_address+0xc2/0xd0 [ 826.486296] ? netlink_unicast+0x490/0x490 [ 826.486671] ? iovec_from_user.part.0+0x7a/0x1a0 [ 826.487083] ? netlink_unicast+0x490/0x490 [ 826.487461] sock_sendmsg+0x73/0xc0 [ 826.487803] ____sys_sendmsg+0x364/0x380 [ 826.488186] ? import_iovec+0x7/0x10 [ 826.488531] ? kernel_sendmsg+0x30/0x30 [ 826.488893] ? __copy_msghdr+0x180/0x180 [ 826.489258] ? kasan_save_stack+0x2e/0x40 [ 826.489629] ? kasan_save_stack+0x1e/0x40 [ 826.490002] ? __kasan_record_aux_stack+0x9f/0xb0 [ 826.490424] ? __call_rcu_common.constprop.0+0x46/0x580 [ 826.490876] ___sys_sendmsg+0xdf/0x140 [ 826.491231] ? copy_msghdr_from_user+0x110/0x110 [ 826.491649] ? fget_raw+0x120/0x120 [ 826.491988] ? ___sys_recvmsg+0xd9/0x130 [ 826.492355] ? folio_batch_add_and_move+0x80/0xa0 [ 826.492776] ? _raw_spin_lock+0x7a/0xd0 [ 826.493137] ? _raw_spin_lock+0x7a/0xd0 [ 826.493500] ? _raw_read_lock_irq+0x30/0x30 [ 826.493880] ? kasan_set_track+0x21/0x30 [ 826.494249] ? kasan_save_free_info+0x2a/0x40 [ 826.494650] ? do_sys_openat2+0xff/0x270 [ 826.495016] ? __fget_light+0x1b5/0x200 [ 826.495377] ? __virt_addr_valid+0xb1/0x130 [ 826.495763] __sys_sendmsg+0xb2/0x130 [ 826.496118] ? __sys_sendmsg_sock+0x20/0x20 [ 826.496501] ? __x64_sys_rseq+0x2e0/0x2e0 [ 826.496874] ? do_user_addr_fault+0x276/0x820 [ 826.497273] ? fpregs_assert_state_consistent+0x52/0x60 [ 826.497727] ? exit_to_user_mode_prepare+0x30/0x120 [ 826.498158] do_syscall_64+0x3d/0x90 [ 826.498502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.498949] RIP: 0033:0x7f9b67f4f887 [ 826.499294] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 826.500742] RSP: 002b:00007fff5d1a5498 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 826.501395] RAX: ffffffffffffffda RBX: 0000000064413ce6 RCX: 00007f9b67f4f887 [ 826.501975] RDX: 0000000000000000 RSI: 00007fff5d1a5500 RDI: 0000000000000003 [ 826.502556] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ 826.503135] R10: 00007f9b67e08708 R11: 0000000000000246 R12: 0000000000000001 [ 826.503714] R13: 0000000000000001 R14: 00007fff5d1a9800 R15: 0000000000485400 [ 826.504304] </TASK> [ 826.504753] Allocated by task 3764: [ 826.505090] kasan_save_stack+0x1e/0x40 [ 826.505453] kasan_set_track+0x21/0x30 [ 826.505810] __kasan_kmalloc+0x77/0x90 [ 826.506164] __mlx5_create_flow_table+0x16d/0xbb0 [mlx5_core] [ 826.506742] esw_offloads_enable+0x60d/0xfb0 [mlx5_core] [ 826.507292] mlx5_eswitch_enable_locked+0x4d3/0x680 [mlx5_core] [ 826.507885] mlx5_devlink_eswitch_mode_set+0x2a3/0x580 [mlx5_core] [ 826.508513] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.508969] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.509427] genl_rcv_msg+0x28d/0x3e0 [ 826.509772] netlink_rcv_skb+0xe0/0x210 [ 826.510133] genl_rcv+0x24/0x40 [ 826.510448] netlink_unicast+0x346/0x490 [ 826.510810] netlink_sendmsg+0x3b0/0x6c0 [ 826.511179] sock_sendmsg+0x73/0xc0 [ 826.511519] __sys_sendto+0x18d/0x220 [ 826.511867] __x64_sys_sendto+0x72/0x80 [ 826.512232] do_syscall_64+0x3d/0x90 [ 826.512576] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.513220] Freed by task 5674: [ 826.513535] kasan_save_stack+0x1e/0x40 [ 826.513893] kasan_set_track+0x21/0x30 [ 826.514245] kasan_save_free_info+0x2a/0x40 [ 826.514629] ____kasan_slab_free+0x11a/0x1b0 [ 826.515021] __kmem_cache_free+0x14d/0x280 [ 826.515399] tree_put_node+0x109/0x1c0 [mlx5_core] [ 826.515907] mlx5_destroy_flow_table+0x119/0x630 [mlx5_core] [ 826.516481] esw_offloads_steering_cleanup+0xe7/0x150 [mlx5_core] [ 826.517084] esw_offloads_disable+0xe0/0x160 [mlx5_core] [ 826.517632] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core] [ 826.518225] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core] [ 826.518834] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.519286] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.519748] genl_rcv_msg+0x28d/0x3e0 [ 826.520101] netlink_rcv_skb+0xe0/0x210 [ 826.520458] genl_rcv+0x24/0x40 [ 826.520771] netlink_unicast+0x346/0x490 [ 826.521137] netlink_sendmsg+0x3b0/0x6c0 [ 826.521505] sock_sendmsg+0x73/0xc0 [ 826.521842] __sys_sendto+0x18d/0x220 [ 826.522191] __x64_sys_sendto+0x72/0x80 [ 826.522554] do_syscall_64+0x3d/0x90 [ 826.522894] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.523540] Last potentially related work creation: [ 826.523969] kasan_save_stack+0x1e/0x40 [ 826.524331] __kasan_record_aux_stack+0x9f/0xb0 [ 826.524739] insert_work+0x30/0x130 [ 826.525078] __queue_work+0x34b/0x690 [ 826.525426] queue_work_on+0x48/0x50 [ 826.525766] __rhashtable_remove_fast_one+0x4af/0x4d0 [mlx5_core] [ 826.526365] del_sw_flow_group+0x1b5/0x270 [mlx5_core] [ 826.526898] tree_put_node+0x109/0x1c0 [mlx5_core] [ 826.527407] esw_offloads_steering_cleanup+0xd3/0x150 [mlx5_core] [ 826.528009] esw_offloads_disable+0xe0/0x160 [mlx5_core] [ 826.528616] mlx5_eswitch_disable_locked+0x26c/0x290 [mlx5_core] [ 826.529218] mlx5_devlink_eswitch_mode_set+0x128/0x580 [mlx5_core] [ 826.529823] devlink_nl_cmd_eswitch_set_doit+0xdf/0x1f0 [ 826.530276] genl_family_rcv_msg_doit.isra.0+0x146/0x1c0 [ 826.530733] genl_rcv_msg+0x28d/0x3e0 [ 826.531079] netlink_rcv_skb+0xe0/0x210 [ 826.531439] genl_rcv+0x24/0x40 [ 826.531755] netlink_unicast+0x346/0x490 [ 826.532123] netlink_sendmsg+0x3b0/0x6c0 [ 826.532487] sock_sendmsg+0x73/0xc0 [ 826.532825] __sys_sendto+0x18d/0x220 [ 826.533175] __x64_sys_sendto+0x72/0x80 [ 826.533533] do_syscall_64+0x3d/0x90 [ 826.533877] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 826.534521] The buggy address belongs to the object at ffff888194485800 which belongs to the cache kmalloc-512 of size 512 [ 826.535506] The buggy address is located 48 bytes inside of freed 512-byte region [ffff888194485800, ffff888194485a00) [ 826.536666] The buggy address belongs to the physical page: [ 826.537138] page:00000000d75841dd refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x194480 [ 826.537915] head:00000000d75841dd order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 826.538595] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 826.539089] raw: 0200000000010200 ffff888100042c80 ffffea0004523800 dead000000000002 [ 826.539755] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 826.540417] page dumped because: kasan: bad access detected [ 826.541095] Memory state around the buggy address: [ 826.541519] ffff888194485700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 826.542149] ffff888194485780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 826.542773] >ffff888194485800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.543400] ^ [ 826.543822] ffff888194485880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.544452] ffff888194485900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 826.545079] ================================================================== Fixes: 6702782845a5 ("net/mlx5e: TC, Set CT miss to the specific ct action instance") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 23 May 2023, 05:38:06 UTC
7aa5038 Rahul Rameshbabu 22 February 2023, 00:18:48 UTC net/mlx5e: Fix SQ wake logic in ptp napi_poll context Check in the mlx5e_ptp_poll_ts_cq context if the ptp tx sq should be woken up. Before change, the ptp tx sq may never wake up if the ptp tx ts skb fifo is full when mlx5e_poll_tx_cq checks if the queue should be woken up. Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 23 May 2023, 05:38:05 UTC
691c041 Vlad Buslov 31 March 2023, 12:20:51 UTC net/mlx5e: Fix deadlock in tc route query code Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleeping operations with it, refactor the code for lockless execution in following ways: - RCUify the devcom 'data' pointer. When resetting the pointer synchronously wait for RCU grace period before returning. This is fine since devcom is currently only used for synchronization of pairing/unpairing of eswitches which is rare and already expensive as-is. - Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has already been used in some unlocked contexts without proper annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't an issue since all relevant code paths checked it again after obtaining the devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as "best effort" check to return NULL when devcom is being unpaired. Note that while RCU read lock doesn't prevent the unpaired flag from being changed concurrently it still guarantees that reader can continue to use 'data'. - Refactor mlx5e_tc_query_route_vport() function to use new mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock. [0]: [ 164.599612] ====================================================== [ 164.600142] WARNING: possible circular locking dependency detected [ 164.600667] 6.3.0-rc3+ #1 Not tainted [ 164.601021] ------------------------------------------------------ [ 164.601557] handler1/3456 is trying to acquire lock: [ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.603078] but task is already holding lock: [ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.604459] which lock already depends on the new lock. [ 164.605190] the existing dependency chain (in reverse order) is: [ 164.605848] -> #1 (&comp->sem){++++}-{3:3}: [ 164.606380] down_read+0x39/0x50 [ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core] [ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core] [ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core] [ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core] [ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core] [ 164.610741] tc_setup_cb_add+0xd4/0x200 [ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.611661] fl_change+0xc95/0x18a0 [cls_flower] [ 164.612116] tc_new_tfilter+0x3fc/0xd20 [ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.612936] netlink_rcv_skb+0x54/0x100 [ 164.613339] netlink_unicast+0x190/0x250 [ 164.613746] netlink_sendmsg+0x245/0x4a0 [ 164.614150] sock_sendmsg+0x38/0x60 [ 164.614522] ____sys_sendmsg+0x1d0/0x1e0 [ 164.614934] ___sys_sendmsg+0x80/0xc0 [ 164.615320] __sys_sendmsg+0x51/0x90 [ 164.615701] do_syscall_64+0x3d/0x90 [ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.616568] -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}: [ 164.617210] __lock_acquire+0x159e/0x26e0 [ 164.617638] lock_acquire+0xc2/0x2a0 [ 164.618018] __mutex_lock+0x92/0xcd0 [ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.618943] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.619471] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.620021] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.620564] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.621125] tc_setup_cb_add+0xd4/0x200 [ 164.621531] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.622047] fl_change+0xc95/0x18a0 [cls_flower] [ 164.622500] tc_new_tfilter+0x3fc/0xd20 [ 164.622906] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.623324] netlink_rcv_skb+0x54/0x100 [ 164.623727] netlink_unicast+0x190/0x250 [ 164.624138] netlink_sendmsg+0x245/0x4a0 [ 164.624544] sock_sendmsg+0x38/0x60 [ 164.624919] ____sys_sendmsg+0x1d0/0x1e0 [ 164.625340] ___sys_sendmsg+0x80/0xc0 [ 164.625731] __sys_sendmsg+0x51/0x90 [ 164.626117] do_syscall_64+0x3d/0x90 [ 164.626502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.626995] other info that might help us debug this: [ 164.627725] Possible unsafe locking scenario: [ 164.628268] CPU0 CPU1 [ 164.628683] ---- ---- [ 164.629098] lock(&comp->sem); [ 164.629421] lock(&esw->offloads.encap_tbl_lock); [ 164.630066] lock(&comp->sem); [ 164.630555] lock(&esw->offloads.encap_tbl_lock); [ 164.630993] *** DEADLOCK *** [ 164.631575] 3 locks held by handler1/3456: [ 164.631962] #0: ffff888124b75130 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 164.632703] #1: ffff888116e512b8 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core] [ 164.633552] #2: ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.634435] stack backtrace: [ 164.634883] CPU: 17 PID: 3456 Comm: handler1 Not tainted 6.3.0-rc3+ #1 [ 164.635431] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 164.636340] Call Trace: [ 164.636616] <TASK> [ 164.636863] dump_stack_lvl+0x47/0x70 [ 164.637217] check_noncircular+0xfe/0x110 [ 164.637601] __lock_acquire+0x159e/0x26e0 [ 164.637977] ? mlx5_cmd_set_fte+0x5b0/0x830 [mlx5_core] [ 164.638472] lock_acquire+0xc2/0x2a0 [ 164.638828] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.639339] ? lock_is_held_type+0x98/0x110 [ 164.639728] __mutex_lock+0x92/0xcd0 [ 164.640074] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.640576] ? __lock_acquire+0x382/0x26e0 [ 164.640958] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641468] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641965] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.642454] ? lock_release+0xbf/0x240 [ 164.642819] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.643318] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.643835] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.644340] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.644862] ? lock_acquire+0xc2/0x2a0 [ 164.645219] tc_setup_cb_add+0xd4/0x200 [ 164.645588] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.646067] fl_change+0xc95/0x18a0 [cls_flower] [ 164.646488] tc_new_tfilter+0x3fc/0xd20 [ 164.646861] ? tc_del_tfilter+0x810/0x810 [ 164.647236] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.647621] ? rtnl_setlink+0x160/0x160 [ 164.647982] netlink_rcv_skb+0x54/0x100 [ 164.648348] netlink_unicast+0x190/0x250 [ 164.648722] netlink_sendmsg+0x245/0x4a0 [ 164.649090] sock_sendmsg+0x38/0x60 [ 164.649434] ____sys_sendmsg+0x1d0/0x1e0 [ 164.649804] ? copy_msghdr_from_user+0x6d/0xa0 [ 164.650213] ___sys_sendmsg+0x80/0xc0 [ 164.650563] ? lock_acquire+0xc2/0x2a0 [ 164.650926] ? lock_acquire+0xc2/0x2a0 [ 164.651286] ? __fget_files+0x5/0x190 [ 164.651644] ? find_held_lock+0x2b/0x80 [ 164.652006] ? __fget_files+0xb9/0x190 [ 164.652365] ? lock_release+0xbf/0x240 [ 164.652723] ? __fget_files+0xd3/0x190 [ 164.653079] __sys_sendmsg+0x51/0x90 [ 164.653435] do_syscall_64+0x3d/0x90 [ 164.653784] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.654229] RIP: 0033:0x7f378054f8bd [ 164.654577] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 6a c3 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 be c3 f4 ff 48 [ 164.656041] RSP: 002b:00007f377fa114b0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 164.656701] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f378054f8bd [ 164.657297] RDX: 0000000000000000 RSI: 00007f377fa11540 RDI: 0000000000000014 [ 164.657885] RBP: 00007f377fa12278 R08: 0000000000000000 R09: 000000000000015c [ 164.658472] R10: 00007f377fa123d0 R11: 0000000000000293 R12: 0000560962d99bd0 [ 164.665317] R13: 0000000000000000 R14: 0000560962d99bd0 R15: 00007f377fa11540 Fixes: f9d196bd632b ("net/mlx5e: Use correct eswitch for stack devices with lag") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 23 May 2023, 05:38:05 UTC
a657351 Roi Dayan 01 May 2023, 11:37:56 UTC net/mlx5: Fix error message when failing to allocate device memory Fix spacing for the error and also the correct error code pointer. Fixes: c9b9dcb430b3 ("net/mlx5: Move device memory management to mlx5_core") Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 23 May 2023, 05:38:05 UTC
be071cd Vlad Buslov 03 April 2023, 20:26:00 UTC net/mlx5e: Use correct encap attribute during invalidation With introduction of post action infrastructure most of the users of encap attribute had been modified in order to obtain the correct attribute by calling mlx5e_tc_get_encap_attr() helper instead of assuming encap action is always on default attribute. However, the cited commit didn't modify mlx5e_invalidate_encap() which prevents it from destroying correct modify header action which leads to a warning [0]. Fix the issue by using correct attribute. [0]: Feb 21 09:47:35 c-237-177-40-045 kernel: WARNING: CPU: 17 PID: 654 at drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:684 mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: RIP: 0010:mlx5e_tc_attach_mod_hdr+0x1cc/0x230 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: Call Trace: Feb 21 09:47:35 c-237-177-40-045 kernel: <TASK> Feb 21 09:47:35 c-237-177-40-045 kernel: mlx5e_tc_fib_event_work+0x8e3/0x1f60 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: ? mlx5e_take_all_encap_flows+0xe0/0xe0 [mlx5_core] Feb 21 09:47:35 c-237-177-40-045 kernel: ? lock_downgrade+0x6d0/0x6d0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x273/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: process_one_work+0x7c2/0x1310 Feb 21 09:47:35 c-237-177-40-045 kernel: ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? pwq_dec_nr_in_flight+0x230/0x230 Feb 21 09:47:35 c-237-177-40-045 kernel: ? rwlock_bug.part.0+0x90/0x90 Feb 21 09:47:35 c-237-177-40-045 kernel: worker_thread+0x59d/0xec0 Feb 21 09:47:35 c-237-177-40-045 kernel: ? __kthread_parkme+0xd9/0x1d0 Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 23 May 2023, 05:38:05 UTC
c7dd225 Yevgeny Kliteynik 02 April 2023, 14:14:10 UTC net/mlx5: DR, Check force-loopback RC QP capability independently from RoCE SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB (loopback), and FL (force-loopback) QP is preferred for performance. FL is available when RoCE is enabled or disabled based on RoCE caps. This patch adds reading of FL capability from HCA caps in addition to the existing reading from RoCE caps, thus fixing the case where we didn't have loopback enabled when RoCE was disabled. Fixes: 7304d603a57a ("net/mlx5: DR, Add support for force-loopback QP") Signed-off-by: Itamar Gozlan <igozlan@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 23 May 2023, 05:38:05 UTC
1e5daf5 Erez Shitrit 09 March 2023, 14:43:15 UTC net/mlx5: DR, Fix crc32 calculation to work on big-endian (BE) CPUs When calculating crc for hash index we use the function crc32 that calculates for little-endian (LE) arch. Then we convert it to network endianness using htonl(), but it's wrong to do the conversion in BE archs since the crc32 value is already LE. The solution is to switch the bytes from the crc result for all types of arc. Fixes: 40416d8ede65 ("net/mlx5: DR, Replace CRC32 implementation to use kernel lib") Signed-off-by: Erez Shitrit <erezsh@nvidia.com> Reviewed-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 23 May 2023, 05:38:05 UTC
2be5bd4 Shay Drory 20 March 2023, 11:07:53 UTC net/mlx5: Handle pairing of E-switch via uplink un/load APIs In case user switch a device from switchdev mode to legacy mode, mlx5 first unpair the E-switch and afterwards unload the uplink vport. From the other hand, in case user remove or reload a device, mlx5 first unload the uplink vport and afterwards unpair the E-switch. The latter is causing a bug[1], hence, handle pairing of E-switch as part of uplink un/load APIs. [1] In case VF_LAG is used, every tc fdb flow is duplicated to the peer esw. However, the original esw keeps a pointer to this duplicated flow, not the peer esw. e.g.: if user create tc fdb flow over esw0, the flow is duplicated over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated flow. During module unload while a peer tc fdb flow is still offloaded, in case the first device to be removed is the peer device (esw1 in the example above), the peer net-dev is destroyed, and so the mlx5e_priv is memset to 0. Afterwards, the peer device is trying to unpair himself from the original device (esw0 in the example above). Unpair API invoke the original device to clear peer flow from its eswitch (esw0), but the peer flow, which is stored over the original eswitch (esw0), is trying to use the peer mlx5e_priv, which is memset to 0 and result in bellow kernel-oops. [ 157.964081 ] BUG: unable to handle page fault for address: 000000000002ce60 [ 157.964662 ] #PF: supervisor read access in kernel mode [ 157.965123 ] #PF: error_code(0x0000) - not-present page [ 157.965582 ] PGD 0 P4D 0 [ 157.965866 ] Oops: 0000 [#1] SMP [ 157.967670 ] RIP: 0010:mlx5e_tc_del_fdb_flow+0x48/0x460 [mlx5_core] [ 157.976164 ] Call Trace: [ 157.976437 ] <TASK> [ 157.976690 ] __mlx5e_tc_del_fdb_peer_flow+0xe6/0x100 [mlx5_core] [ 157.977230 ] mlx5e_tc_clean_fdb_peer_flows+0x67/0x90 [mlx5_core] [ 157.977767 ] mlx5_esw_offloads_unpair+0x2d/0x1e0 [mlx5_core] [ 157.984653 ] mlx5_esw_offloads_devcom_event+0xbf/0x130 [mlx5_core] [ 157.985212 ] mlx5_devcom_send_event+0xa3/0xb0 [mlx5_core] [ 157.985714 ] esw_offloads_disable+0x5a/0x110 [mlx5_core] [ 157.986209 ] mlx5_eswitch_disable_locked+0x152/0x170 [mlx5_core] [ 157.986757 ] mlx5_eswitch_disable+0x51/0x80 [mlx5_core] [ 157.987248 ] mlx5_unload+0x2a/0xb0 [mlx5_core] [ 157.987678 ] mlx5_uninit_one+0x5f/0xd0 [mlx5_core] [ 157.988127 ] remove_one+0x64/0xe0 [mlx5_core] [ 157.988549 ] pci_device_remove+0x31/0xa0 [ 157.988933 ] device_release_driver_internal+0x18f/0x1f0 [ 157.989402 ] driver_detach+0x3f/0x80 [ 157.989754 ] bus_remove_driver+0x70/0xf0 [ 157.990129 ] pci_unregister_driver+0x34/0x90 [ 157.990537 ] mlx5_cleanup+0xc/0x1c [mlx5_core] [ 157.990972 ] __x64_sys_delete_module+0x15a/0x250 [ 157.991398 ] ? exit_to_user_mode_prepare+0xea/0x110 [ 157.991840 ] do_syscall_64+0x3d/0x90 [ 157.992198 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 04de7dda7394 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows") Fixes: 1418ddd96afd ("net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAG") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 23 May 2023, 05:38:04 UTC
2a0a935 Shay Drory 02 May 2023, 08:03:53 UTC net/mlx5: Collect command failures data only for known commands DEVX can issue a general command, which is not used by mlx5 driver. In case such command is failed, mlx5 is trying to collect the failure data, However, mlx5 doesn't create a storage for this command, since mlx5 doesn't use it. This lead to array-index-out-of-bounds error. Fix it by checking whether the command is known before collecting the failure data. Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> 23 May 2023, 05:38:04 UTC
18c40a1 Chuck Lever 19 May 2023, 17:08:24 UTC net/handshake: Fix sock->file allocation sock->file = sock_alloc_file(sock, O_NONBLOCK, NULL); ^^^^ ^^^^ sock_alloc_file() calls release_sock() on error but the left hand side of the assignment dereferences "sock". This isn't the bug and I didn't report this earlier because there is an assert that it doesn't fail. net/handshake/handshake-test.c:221 handshake_req_submit_test4() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:233 handshake_req_submit_test4() warn: 'req' was already freed. net/handshake/handshake-test.c:254 handshake_req_submit_test5() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:290 handshake_req_submit_test6() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:321 handshake_req_cancel_test1() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:355 handshake_req_cancel_test2() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:367 handshake_req_cancel_test2() warn: 'req' was already freed. net/handshake/handshake-test.c:395 handshake_req_cancel_test3() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:407 handshake_req_cancel_test3() warn: 'req' was already freed. net/handshake/handshake-test.c:451 handshake_req_destroy_test1() error: dereferencing freed memory 'sock' net/handshake/handshake-test.c:463 handshake_req_destroy_test1() warn: 'req' was already freed. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: 88232ec1ec5e ("net/handshake: Add Kunit tests for the handshake consumer API") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/168451609436.45209.15407022385441542980.stgit@oracle-102.nfsv4bat.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 23 May 2023, 02:25:24 UTC
b21c7ba Chuck Lever 19 May 2023, 17:12:50 UTC net/handshake: Squelch allocation warning during Kunit test The "handshake_req_alloc excessive privsize" kunit test is intended to check what happens when the maximum privsize is exceeded. The WARN_ON_ONCE_GFP at mm/page_alloc.c:4744 can be disabled safely for this test. Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Fixes: 88232ec1ec5e ("net/handshake: Add Kunit tests for the handshake consumer API") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/168451636052.47152.9600443326570457947.stgit@oracle-102.nfsv4bat.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 23 May 2023, 02:24:52 UTC
640bf95 Christophe JAILLET 20 May 2023, 09:48:55 UTC 3c589_cs: Fix an error handling path in tc589_probe() Should tc589_config() fail, some resources need to be released as already done in the remove function. Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/d8593ae867b24c79063646e36f9b18b0790107cb.1684575975.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> 23 May 2023, 02:17:58 UTC
5b17a49 Christophe JAILLET 20 May 2023, 08:30:17 UTC forcedeth: Fix an error handling path in nv_probe() If an error occures after calling nv_mgmt_acquire_sema(), it should be undone with a corresponding nv_mgmt_release_sema() call. Add it in the error handling path of the probe as already done in the remove function. Fixes: cac1c52c3621 ("forcedeth: mgmt unit interface") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com> Link: https://lore.kernel.org/r/355e9a7d351b32ad897251b6f81b5886fcdc6766.1684571393.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> 23 May 2023, 02:17:28 UTC
ae8373a Linus Torvalds 22 May 2023, 23:31:28 UTC Merge tag 'x86_urgent_for_6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Dave Hansen: "This works around and issue where the INVLPG instruction may miss invalidating kernel TLB entries in recent hybrid CPUs. I do expect an eventual microcode fix for this. When the microcode version numbers are known, we can circle back around and add them the model table to disable this workaround" * tag 'x86_urgent_for_6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Avoid incomplete Global INVLPG flushes 22 May 2023, 23:31:28 UTC
1177dcc Linus Torvalds 22 May 2023, 22:35:53 UTC Merge tag 'modules-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module fix from Luis Chamberlain: "Only one fix has trickled through. Harshit Mogalapalli found a use-after-free bug through static analysis with smatch" * tag 'modules-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: module: Fix use-after-free bug in read_file_mod_stats() 22 May 2023, 22:35:53 UTC
d36f6ef Harshit Mogalapalli 28 April 2023, 05:59:33 UTC module: Fix use-after-free bug in read_file_mod_stats() Smatch warns: kernel/module/stats.c:394 read_file_mod_stats() warn: passing freed memory 'buf' We are passing 'buf' to simple_read_from_buffer() after freeing it. Fix this by changing the order of 'simple_read_from_buffer' and 'kfree'. Fixes: df3e764d8e5c ("module: add debug stats to help identify memory pressure") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> 22 May 2023, 21:13:13 UTC
421ca22 Linus Torvalds 22 May 2023, 19:01:13 UTC Merge tag 'nfs-for-6.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs Pull NFS client fixes from Anna Schumaker: "Stable Fix: - Don't change task->tk_status after the call to rpc_exit_task Other Bugfixes: - Convert kmap_atomic() to kmap_local_folio() - Fix a potential double free with READ_PLUS" * tag 'nfs-for-6.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFSv4.2: Fix a potential double free with READ_PLUS SUNRPC: Don't change task->tk_status after the call to rpc_exit_task NFS: Convert kmap_atomic() to kmap_local_folio() 22 May 2023, 19:01:13 UTC
b34ffb0 Anton Protopopov 22 May 2023, 15:45:58 UTC bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps The LRU and LRU_PERCPU maps allocate a new element on update before locking the target hash table bucket. Right after that the maps try to lock the bucket. If this fails, then maps return -EBUSY to the caller without releasing the allocated element. This makes the element untracked: it doesn't belong to either of free lists, and it doesn't belong to the hash table, so can't be re-used; this eventually leads to the permanent -ENOMEM on LRU map updates, which is unexpected. Fix this by returning the element to the local free list if bucket locking fails. Fixes: 20b6cc34ea74 ("bpf: Avoid hashtab deadlock with map_locked") Signed-off-by: Anton Protopopov <aspsk@isovalent.com> Link: https://lore.kernel.org/r/20230522154558.2166815-1-aspsk@isovalent.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> 22 May 2023, 17:26:39 UTC
d703797 Helge Deller 17 May 2023, 13:54:40 UTC parisc: Flush gatt writes and adjust gatt mask in parisc_agp_mask_memory() Flush caches after changing gatt entries and calculate entry according to SBA requirements. Signed-off-by: Helge Deller <deller@gmx.de> 22 May 2023, 16:30:52 UTC
59fa126 Helge Deller 17 May 2023, 13:52:30 UTC parisc: Improve cache flushing for PCXL in arch_sync_dma_for_cpu() Add comment in arch_sync_dma_for_device() and handle the direction flag in arch_sync_dma_for_cpu(). When receiving data from the device (DMA_FROM_DEVICE) unconditionally purge the data cache in arch_sync_dma_for_cpu(). Signed-off-by: Helge Deller <deller@gmx.de> 22 May 2023, 16:30:52 UTC
240ca95 Mark Brown 22 May 2023, 14:48:41 UTC ASoC: Intel: Fixes Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>: Series of fixes for issues found during development and testing, primarly for avs driver. 22 May 2023, 14:48:41 UTC
45dfbd9 Imre Deak 10 May 2023, 10:31:18 UTC drm/i915: Fix PIPEDMC disabling for a bigjoiner configuration For a bigjoiner configuration display->crtc_disable() will be called first for the slave CRTCs and then for the master CRTC. However slave CRTCs will be actually disabled only after the master CRTC is disabled (from the encoder disable hooks called with the master CRTC state). Hence the slave PIPEDMCs can be disabled only after the master CRTC is disabled, make this so. intel_encoders_post_pll_disable() must be called only for the master CRTC, as for the other two encoder disable hooks. While at it fix this up as well. This didn't cause a problem, since intel_encoders_post_pll_disable() will call the corresponding hook only for an encoder/connector connected to the given CRTC, however slave CRTCs will have no associated encoder/connector. Fixes: 3af2ff0840be ("drm/i915: Enable a PIPEDMC whenever its corresponding pipe is enabled") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230510103131.1618266-2-imre.deak@intel.com (cherry picked from commit 7eeef32719f6af935a1554813e6bc206446339cd) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> 22 May 2023, 14:10:11 UTC
eb79927 Tetsuo Handa 11 May 2023, 13:47:32 UTC debugobjects: Don't wake up kswapd from fill_pool() syzbot is reporting a lockdep warning in fill_pool() because the allocation from debugobjects is using GFP_ATOMIC, which is (__GFP_HIGH | __GFP_KSWAPD_RECLAIM) and therefore tries to wake up kswapd, which acquires kswapd_wait::lock. Since fill_pool() might be called with arbitrary locks held, fill_pool() should not assume that acquiring kswapd_wait::lock is safe. Use __GFP_HIGH instead and remove __GFP_NORETRY as it is pointless for !__GFP_DIRECT_RECLAIM allocation. Fixes: 3ac7fe5a4aab ("infrastructure to debug (dynamic) objects") Reported-by: syzbot <syzbot+fe0c72f0ccbb93786380@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/6577e1fa-b6ee-f2be-2414-a2b51b1c5e30@I-love.SAKURA.ne.jp Closes: https://syzkaller.appspot.com/bug?extid=fe0c72f0ccbb93786380 22 May 2023, 12:52:58 UTC
81302b1 Takashi Iwai 18 May 2023, 11:35:20 UTC ALSA: hda: Fix unhandled register update during auto-suspend period It's reported that the recording started right after the driver probe doesn't work properly, and it turned out that this is related with the codec auto-suspend. Namely, after the probe phase, the usage count goes zero, and the auto-suspend is programmed, but the codec is kept still active until the auto-suspend expiration. When an application (e.g. alsactl) updates the mixer values at this moment, the values are cached but not actually written. Then, starting arecord thereafter also results in the silence because of the missing unmute. The root cause is the handling of "lazy update" mode; when a mixer value is updated *after* the suspend, it should update only the cache and exits. At the resume, the cached value is written to the device, in turn. The problem is that the current code misinterprets the state of auto-suspend as if it were already suspended. Although we can add the check of the actual device state after pm_runtime_get_if_in_use() for catching the missing state, this won't suffice; the second call of regmap_update_bits_check() will skip writing the register because the cache has been already updated by the first call. So we'd need fixes in two different places. OTOH, a simpler fix is to replace pm_runtime_get_if_in_use() with pm_runtime_get_if_active() (with ign_usage_count=true). This change implies that the driver takes the pm refcount if the device is still in ACTIVE state and continues the processing. A small caveat is that this will leave the auto-suspend timer. But, since the timer callback itself checks the device state and aborts gracefully when it's active, this won't be any substantial problem. Long story short: we address the missing register-write problem just by replacing the pm_runtime_*() call in snd_hda_keep_power_up(). Fixes: fc4f000bf8c0 ("ALSA: hda - Fix unexpected resume through regmap code path") Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Closes: https://lore.kernel.org/r/a7478636-af11-92ab-731c-9b13c582a70d@linux.intel.com Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230518113520.15213-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> 22 May 2023, 12:20:29 UTC
b845b57 Finn Thain 06 May 2023, 09:38:12 UTC m68k: Move signal frame following exception on 68020/030 On 68030/020, an instruction such as, moveml %a2-%a3/%a5,%sp@- may cause a stack page fault during instruction execution (i.e. not at an instruction boundary) and produce a format 0xB exception frame. In this situation, the value of USP will be unreliable. If a signal is to be delivered following the exception, this USP value is used to calculate the location for a signal frame. This can result in a corrupted user stack. The corruption was detected in dash (actually in glibc) where it showed up as an intermittent "stack smashing detected" message and crash following signal delivery for SIGCHLD. It was hard to reproduce that failure because delivery of the signal raced with the page fault and because the kernel places an unpredictable gap of up to 7 bytes between the USP and the signal frame. A format 0xB exception frame can be produced by a bus error or an address error. The 68030 Users Manual says that address errors occur immediately upon detection during instruction prefetch. The instruction pipeline allows prefetch to overlap with other instructions, which means an address error can arise during the execution of a different instruction. So it seems likely that this patch may help in the address error case also. Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Link: https://lore.kernel.org/all/CAMuHMdW3yD22_ApemzW_6me3adq6A458u1_F0v-1EYwK_62jPA@mail.gmail.com/ Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: stable@vger.kernel.org Co-developed-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/9e66262a754fcba50208aa424188896cc52a1dd1.1683365892.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> 22 May 2023, 11:51:20 UTC
6afe2ae Charles Keepax 18 May 2023, 09:39:26 UTC spi: spi-cadence: Interleave write of TX and read of RX FIFO When working in slave mode it seems the timing is exceedingly tight. The TX FIFO can never empty, because the master is driving the clock so zeros would be sent for those bytes where the FIFO is empty. Return to interleaving the writing of the TX FIFO and the reading of the RX FIFO to try to ensure the data is available when required. Fixes: a84c11e16dc2 ("spi: spi-cadence: Avoid read of RX FIFO before its ready") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230518093927.711358-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> 22 May 2023, 10:41:05 UTC
c21f11d Matthew Auld 19 May 2023, 09:07:33 UTC drm: fix drmm_mutex_init() In mutex_init() lockdep identifies a lock by defining a special static key for each lock class. However if we wrap the macro in a function, like in drmm_mutex_init(), we end up generating: int drmm_mutex_init(struct drm_device *dev, struct mutex *lock) { static struct lock_class_key __key; __mutex_init((lock), "lock", &__key); .... } The static __key here is what lockdep uses to identify the lock class, however since this is just a normal function the key here will be created once, where all callers then use the same key. In effect the mutex->depmap.key will be the same pointer for different drmm_mutex_init() callers. This then results in impossible lockdep splats since lockdep thinks completely unrelated locks are the same lock class. To fix this turn drmm_mutex_init() into a macro such that it generates a different "static struct lock_class_key __key" for each invocation, which looks to be inline with what mutex_init() wants. v2: - Revamp the commit message with clearer explanation of the issue. - Rather export __drmm_mutex_release() than static inline. Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reported-by: Sarah Walker <sarah.walker@imgtec.com> Fixes: e13f13e039dc ("drm: Add DRM-managed mutex_init()") Cc: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230519090733.489019-1-matthew.auld@intel.com 22 May 2023, 10:23:50 UTC
3a2e3fa David Epping 19 May 2023, 11:05:53 UTC ASoC: dt-bindings: tlv320aic32x4: Fix supply names The term "-supply" is a suffix to regulator names. Signed-off-by: David Epping <david.epping@missinglinkelectronics.com> Link: https://lore.kernel.org/r/20230519110545.GA18663@nucnuc.mle Signed-off-by: Mark Brown <broonie@kernel.org> 22 May 2023, 10:18:31 UTC
25148f5 Amadeusz Sławiński 19 May 2023, 20:17:11 UTC ASoC: Intel: avs: Add missing checks on FE startup Constraint functions have return values, they should be checked for potential errors. Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-8-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> 22 May 2023, 10:18:26 UTC
320f4d8 Amadeusz Sławiński 19 May 2023, 20:17:10 UTC ASoC: Intel: avs: Fix avs_path_module::instance_id size All IPCs using instance_id use 8 bit value. Original commit used 16 bit value because FW reports possible max value in 16 bit field, but in practice FW limits the value to 8 bits. Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-7-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> 22 May 2023, 10:18:25 UTC
8368551 Cezary Rojewski 19 May 2023, 20:17:09 UTC ASoC: Intel: avs: Account for UID of ACPI device Configurations with multiple codecs attached to the platform are supported but only if each from the set is different. Add new field representing the 'Unique ID' so that codecs that share Vendor and Part IDs can be differentiated and thus enabling support for such configurations. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-6-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> 22 May 2023, 10:18:24 UTC
1cf036d Cezary Rojewski 19 May 2023, 20:17:08 UTC ASoC: Intel: avs: Fix declaration of enum avs_channel_config Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is reserved for 'C7_1' instead. Fixes: 580a5912d1fe ("ASoC: Intel: avs: Declare module configuration types") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-5-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> 22 May 2023, 10:18:23 UTC
9510965 Cezary Rojewski 19 May 2023, 20:17:07 UTC ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg Constant 'C4_CHANNEL' does not exist on the firmware side. Value 0xC is reserved for 'C7_1' instead. Fixes: 04afbbbb1cba ("ASoC: Intel: Skylake: Update the topology interface structure") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-4-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> 22 May 2023, 10:18:22 UTC
d849996 Amadeusz Sławiński 19 May 2023, 20:17:06 UTC ASoC: Intel: avs: Access path components under lock Path and its components should be accessed under lock to prevent problems with one thread modifying them while other tries to read. Fixes: c8c960c10971 ("ASoC: Intel: avs: APL-based platforms support") Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-3-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> 22 May 2023, 10:18:21 UTC
ff04437 Amadeusz Sławiński 19 May 2023, 20:17:05 UTC ASoC: Intel: avs: Fix module lookup When changing value of kcontrol, FW module to which data should be send needs to be found. Currently it is done in improper way, fix it. Change function name to indicate that it looks only for volume module. This allows to change volume during runtime, instead of only changing init value. Fixes: be2b81b519d7 ("ASoC: Intel: avs: Parse control tuples") Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230519201711.4073845-2-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> 22 May 2023, 10:18:20 UTC
6ca328e Xin Long 18 May 2023, 20:03:00 UTC sctp: fix an issue that plpmtu can never go to complete state When doing plpmtu probe, the probe size is growing every time when it receives the ACK during the Search state until the probe fails. When the failure occurs, pl.probe_high is set and it goes to the Complete state. However, if the link pmtu is huge, like 65535 in loopback_dev, the probe eventually keeps using SCTP_MAX_PLPMTU as the probe size and never fails. Because of that, pl.probe_high can not be set, and the plpmtu probe can never go to the Complete state. Fix it by setting pl.probe_high to SCTP_MAX_PLPMTU when the probe size grows to SCTP_MAX_PLPMTU in sctp_transport_pl_recv(). Also, not allow the probe size greater than SCTP_MAX_PLPMTU in the Complete state. Fixes: b87641aff9e7 ("sctp: do state transition when a probe succeeds on HB ACK recv path") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 May 2023, 10:05:20 UTC
7843380 Adam Stylinski 21 May 2023, 14:52:23 UTC ALSA: hda/ca0132: add quirk for EVGA X299 DARK This quirk is necessary for surround and other DSP effects to work with the onboard ca0132 based audio chipset for the EVGA X299 dark mainboard. Signed-off-by: Adam Stylinski <kungfujesus06@gmail.com> Cc: <stable@vger.kernel.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=67071 Link: https://lore.kernel.org/r/ZGopOe19T1QOwizS@eggsbenedict.adamsnet Signed-off-by: Takashi Iwai <tiwai@suse.de> 22 May 2023, 06:26:01 UTC
4115af4 Thomas Gleixner 22 May 2023, 06:11:01 UTC Merge tag 'irqchip-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - MIPS GIC fixes for issues that could result in either loss of state in the interrupt controller, or a deadlock - Workaround for Mediatek Chromebooks that only save/restore partial state when turning the GIC redistributors off, resulting if fireworks if Linux uses interrupt priorities for pseudo-NMIs - Fix the MBIGEN error handling on init - Mark meson-gpio OF data structures as __maybe_unused, avoiding compilation warnings on non-OF setups Link: https://lore.kernel.org/lkml/20230521101812.2520740-1-maz@kernel.org 22 May 2023, 06:11:01 UTC
44c026a Linus Torvalds 21 May 2023, 21:05:48 UTC Linux 6.4-rc3 21 May 2023, 21:05:48 UTC
fa4fe8c Linus Torvalds 21 May 2023, 21:03:22 UTC Merge tag 'uml-for-linus-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux Pull UML fix from Richard Weinberger: - Fix modular build for UML watchdog * tag 'uml-for-linus-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: um: harddog: fix modular build 21 May 2023, 21:03:22 UTC
a35747c Linus Torvalds 21 May 2023, 20:58:37 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "ARM: - Plug a race in the stage-2 mapping code where the IPA and the PA would end up being out of sync - Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...) - FP/SVE/SME documentation update, in the hope that this field becomes clearer... - Add workaround for Apple SEIS brokenness to a new SoC - Random comment fixes x86: - add MSR_IA32_TSX_CTRL into msrs_to_save - fixes for XCR0 handling in SGX enclaves Generic: - Fix vcpu_array[0] races - Fix race between starting a VM and 'reboot -f'" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM) KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATE KVM: Fix vcpu_array[0] races KVM: VMX: Fix header file dependency of asm/vmx.h KVM: Don't enable hardware after a restart/shutdown is initiated KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations KVM: arm64: Clarify host SME state management KVM: arm64: Restructure check for SVE support in FP trap handler KVM: arm64: Document check for TIF_FOREIGN_FPSTATE KVM: arm64: Fix repeated words in comments KVM: arm64: Constify start/end/phys fields of the pgtable walker data KVM: arm64: Infer PA offset from VA in hyp map walker KVM: arm64: Infer the PA offset from IPA in stage-2 map walker KVM: arm64: Use the bitmap API to allocate bitmaps KVM: arm64: Slightly optimize flush_context() 21 May 2023, 20:58:37 UTC
c47d122 Linus Torvalds 21 May 2023, 20:24:59 UTC Merge tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fail graciously if BUILD_BPF_SKEL=1 is specified and clang isn't available - Add empty 'struct rq' to 'perf lock contention' to satisfy libbpf 'runqueue' type verification. This feature is built only with BUILD_BPF_SKEL=1 - Make vmlinux.h use bpf.h and perf_event.h in source directory, not system ones that may be old and not have things like 'union perf_sample_weight' - Add system include paths to BPF builds to pick things missing in the headers included by clang -target bpf - Update various header copies with the kernel sources - Change divide by zero and not supported events behavior to show 'nan'/'not counted' in 'perf stat' output. This happens when using things like 'perf stat -M TopdownL2 true', involving JSON metrics - Update no event/metric expectations affected by using JSON metrics in 'perf stat -ddd' perf test - Avoid segv with 'perf stat --topdown' for metrics without a group - Do not assume which events may have a PMU name, allowing the logic to keep an AUX event group together. Makes this usecase work again: $ perf record --no-bpf-event -c 10 -e '{intel_pt//,tlb_flush.stlb_any/aux-sample-size=8192/pp}:u' -- sleep 0.1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.078 MB perf.data ] $ perf script -F-dso,+addr | grep -C5 tlb_flush.stlb_any | head -11 sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc82a2 dl_main+0x9a2 => 7f5350cb38f0 _dl_add_to_namespace_list+0x0 sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cb3908 _dl_add_to_namespace_list+0x18 => 7f5350cbb080 rtld_mutex_dummy+0x0 sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc8350 dl_main+0xa50 => 0 [unknown] sleep 20444 [003] 7939.510244: 1 branches:uH: 7f5350cc83ca dl_main+0xaca => 7f5350caeb60 _dl_process_pt_gnu_property+0x0 sleep 20444 [003] 7939.510245: 1 branches:uH: 7f5350caeb60 _dl_process_pt_gnu_property+0x0 => 0 [unknown] sleep 20444 7939.510245: 10 tlb_flush.stlb_any/aux-sample-size=8192/pp: 0 7f5350caeb60 _dl_process_pt_gnu_property+0x0 sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc87fe dl_main+0xefe => 7f5350ccd240 strcmp+0x0 sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc8862 dl_main+0xf62 => 0 [unknown] - Add a check for the above use case in 'perf test test_intel_pt' - Fix build with refcount checking on arm64, it was still accessing fields that need to be wrapped so that the refcounted struct gets checked - Fix contextid validation in ARM's CS-ETM, so that older kernels without that field can still be supported - Skip unsupported aggregation for stat events found in perf.data files in 'perf script' - Add stat test for record and script to check the previous problem - Remove needless debuginfod queries from 'perf test java symbol', this was just making the test take a long time to complete - Address python SafeConfigParser() deprecation warning in 'perf test attr' - Fix __NR_execve undeclared on i386 'perf bench syscall' build error * tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (33 commits) perf bench syscall: Fix __NR_execve undeclared build error perf test attr: Fix python SafeConfigParser() deprecation warning perf test attr: Update no event/metric expectations tools headers disabled-features: Sync with the kernel sources tools headers UAPI: Sync arch prctl headers with the kernel sources tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench' tools headers x86 cpufeatures: Sync with the kernel sources tools headers UAPI: Sync s390 syscall table file that wires up the memfd_secret syscall tools headers UAPI: Sync linux/prctl.h with the kernel sources perf metrics: Avoid segv with --topdown for metrics without a group perf lock contention: Add empty 'struct rq' to satisfy libbpf 'runqueue' type verification perf cs-etm: Fix contextid validation perf arm64: Fix build with refcount checking perf test: Add stat test for record and script perf script: Skip aggregation for stat events perf build: Add system include paths to BPF builds perf bpf skels: Make vmlinux.h use bpf.h and perf_event.h in source directory perf parse-events: Do not break up AUX event group perf test test_intel_pt.sh: Test sample mode with event with PMU name perf evsel: Modify group pmu name for software events ... 21 May 2023, 20:24:59 UTC
4927cb9 Linus Torvalds 21 May 2023, 18:53:52 UTC Merge tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix broken soft dirty tracking when using the Radix MMU (>= P9) - Fix ISA mapping when "ranges" property is not present, for PASemi Nemo boards - Fix a possible WARN_ON_ONCE hitting in BPF extable handling - Fix incorrect DMA address handling when using 2MB TCEs - Fix a bug in IOMMU table handling for SR-IOV devices - Fix the recent rework of IOMMU handling which left arch code calling clean up routines that are handled by the IOMMU core - A few assorted build fixes Thanks to Christian Zigotzky, Dan Horák, Gaurav Batra, Hari Bathini, Jason Gunthorpe, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Pali Rohár, Randy Dunlap, and Rob Herring. * tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV device powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEs powerpc/iommu: Remove iommu_del_device() powerpc/crypto: Fix aes-gcm-p10 build when VSX=n powerpc/bpf: populate extable entries only during the last pass powerpc/boot: Disable power10 features after BOOTAFLAGS assignment powerpc/64s/radix: Fix soft dirty tracking powerpc/fsl_uli1575: fix kconfig warnings and build errors powerpc/isa-bridge: Fix ISA mapping when "ranges" is not present 21 May 2023, 18:53:52 UTC
90af47e Linus Torvalds 21 May 2023, 18:46:23 UTC Merge tag 'ata-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fix from Damien Le Moal: - Fix DT binding for the ahci-ceva driver to fully describe all iommus, from Michal * tag 'ata-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: dt-bindings: ata: ahci-ceva: Cover all 4 iommus entries 21 May 2023, 18:46:23 UTC
70e137e Linus Torvalds 21 May 2023, 18:13:23 UTC Merge tag 'fbdev-for-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes from Helge Deller: "A few small unspectacular fbdev fixes: - Fix for USB endpoint check in udlfb (found by syzbot fuzzer) - Small fix in error code path in omapfb - compiler warning fixes in fbmem & i810 - code removal and whitespace cleanups in stifb and atyfb" * tag 'fbdev-for-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: stifb: Whitespace cleanups fbdev: udlfb: Use usb_control_msg_send() fbdev: udlfb: Fix endpoint check fbdev: atyfb: Remove unused clock determination fbdev: i810: include i810_main.h in i810_dvt.c fbdev: fbmem: mark get_fb_unmapped_area() static fbdev: omapfb: panel-tpo-td043mtea1: fix error code in probe() 21 May 2023, 18:13:23 UTC
e2065b8 Linus Torvalds 21 May 2023, 17:55:31 UTC Merge tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd Pull ksmbd server fixes from Steve French: - two fixes for incorrect SMB3 message validation (one for client which uses 8 byte padding, and one for empty bcc) - two fixes for out of bounds bugs: one for username offset checks (in session setup) and the other for create context name length checks in open requests * tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: smb2: Allow messages padded to 8byte boundary ksmbd: allocate one more byte for implied bcc[0] ksmbd: fix wrong UserName check in session_user ksmbd: fix global-out-of-bounds in smb2_find_context_vals 21 May 2023, 17:55:31 UTC
0c9dcf1 Linus Torvalds 21 May 2023, 17:20:58 UTC Merge tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs client fixes from Steve French: "Two smb3 client fixes, both related to deferred close, and also for stable: - send close for deferred handles before not after lease break response to avoid possible sharing violations - check all opens on an inode (looking for deferred handles) when lease break is returned not just the handle the lease break came in on" * tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: SMB3: drop reference to cfile before sending oplock break SMB3: Close all deferred handles of inode in case of handle lease break 21 May 2023, 17:20:58 UTC
b9846a6 Mingwei Zhang 09 May 2023, 03:23:48 UTC KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save Add MSR_IA32_TSX_CTRL into msrs_to_save[] to explicitly tell userspace to save/restore the register value during migration. Missing this may cause userspace that relies on KVM ioctl(KVM_GET_MSR_INDEX_LIST) fail to port the value to the target VM. In addition, there is no need to add MSR_IA32_TSX_CTRL when ARCH_CAP_TSX_CTRL_MSR is not supported in kvm_get_arch_capabilities(). So add the checking in kvm_probe_msr_to_save(). Fixes: c11f83e0626b ("KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality") Reported-by: Jim Mattson <jmattson@google.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <20230509032348.1153070-1-mizhang@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 21 May 2023, 08:05:51 UTC
275a872 Sean Christopherson 03 May 2023, 16:08:37 UTC KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM) Drop KVM's manipulation of guest's CPUID.0x12.1 ECX and EDX, i.e. the allowed XFRM of SGX enclaves, now that KVM explicitly checks the guest's allowed XCR0 when emulating ECREATE. Note, this could theoretically break a setup where userspace advertises a "bad" XFRM and relies on KVM to provide a sane CPUID model, but QEMU is the only known user of KVM SGX, and QEMU explicitly sets the SGX CPUID XFRM subleaf based on the guest's XCR0. Reviewed-by: Kai Huang <kai.huang@intel.com> Tested-by: Kai Huang <kai.huang@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230503160838.3412617-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 21 May 2023, 08:05:51 UTC
back to top