https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
65886f4 ipmr: fix mfc notification flags Commit 8cd3ac9f9b7b ("ipmr: advertise new mfc entries via rtnl") reuses the function ipmr_fill_mroute() to notify mfc events. But this function was used only for dump and thus was always setting the flag NLM_F_MULTI, which is wrong in case of a single notification. Libraries like libnl will wait forever for NLMSG_DONE. CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 20 March 2014, 20:24:28 UTC
1c104a6 rtnetlink: fix fdb notification flags Commit 3ff661c38c84 ("net: rtnetlink notify events for FDB NTF_SELF adds and deletes") reuses the function nlmsg_populate_fdb_fill() to notify fdb events. But this function was used only for dump and thus was always setting the flag NLM_F_MULTI, which is wrong in case of a single notification. Libraries like libnl will wait forever for NLMSG_DONE. CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 20 March 2014, 20:24:28 UTC
6326231 tcp: syncookies: do not use getnstimeofday() While it is true that getnstimeofday() uses about 40 cycles if TSC is available, it can use 1600 cycles if hpet is the clocksource. Switch to get_jiffies_64(), as this is more than enough, and go back to 60 seconds periods. Fixes: 8c27bd75f04f ("tcp: syncookies: reduce cookie lifetime to 128 seconds") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> 20 March 2014, 20:22:42 UTC
8805004 netlink: fix setsockopt in mmap examples in documentation The documentation for how to use netlink mmap interface is incorrect. The calls to setsockopt() require an additional argument. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net> 20 March 2014, 18:11:38 UTC
3fb725c Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "Another set of five fixes. The most interesting one is a fix for race condition in the local_irq_disable() implementation used by .S code for pre-MIPS R2 processors only. It leaves a race that's hard but not impossible to hit; the others fairly obvious" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Make local_irq_disable macro safe for non-Mipsr2 MIPS: Octeon: Fix warning in of_device_alloc on cn3xxx MIPS: ftrace: Tweak safe_load()/safe_store() macros MIPS: BCM47XX: Check all (32) GPIOs when looking for a pin MIPS: Fix possible build error with transparent hugepages enabled 20 March 2014, 17:57:52 UTC
92f9973 Merge tag 'sound-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just two minor bug fixes: a fix for a regression in oxygen driver that was introduced in 3.14-rc1, and a stable fix for the return value of compress offload open callback" * tag 'sound-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: compress: Pass through return value of open ops callback ALSA: oxygen: Xonar DG(X): fix Stereo Upmixing regression 20 March 2014, 17:56:37 UTC
f9b8c4c openvswitch: Correctly report flow used times for first 5 minutes after boot. The kernel starts out its "jiffies" timer as 5 minutes below zero, as shown in include/linux/jiffies.h: /* * Have the 32 bit jiffies value wrap 5 minutes after boot * so jiffies wrap bugs show up earlier. */ #define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ)) The loop in ovs_flow_stats_get() starts out with 'used' set to 0, then takes any "later" time. This means that for the first five minutes after boot, flows will always be reported as never used, since 0 is greater than any time already seen. Signed-off-by: Ben Pfaff <blp@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> 20 March 2014, 17:45:21 UTC
8729134 tracing: Fix array size mismatch in format string In event format strings, the array size is reported in two locations. One in array subscript and then via the "size:" attribute. The values reported there have a mismatch. For e.g., in sched:sched_switch the prev_comm and next_comm character arrays have subscript values as [32] where as the actual field size is 16. name: sched_switch ID: 301 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1;signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[32]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[32]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; After bisection, the following commit was blamed: 92edca0 tracing: Use direct field, type and system names This commit removes the duplication of strings for field->name and field->type assuming that all the strings passed in __trace_define_field() are immutable. This is not true for arrays, where the type string is created in event_storage variable and field->type for all array fields points to event_storage. Use __stringify() to create a string constant for the type string. Also, get rid of event_storage and event_storage_mutex that are not needed anymore. also, an added benefit is that this reduces the overhead of events a bit more: text data bss dec hex filename 8424787 2036472 1302528 11763787 b3804b vmlinux 8420814 2036408 1302528 11759750 b37086 vmlinux.patched Link: http://lkml.kernel.org/r/1392349908-29685-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 20 March 2014, 17:21:05 UTC
71ca758 MIPS: Make local_irq_disable macro safe for non-Mipsr2 For non-mipsr2 processors, the local_irq_disable contains an mfc0-mtc0 pair with instructions inbetween. With preemption enabled, this sequence may get preempted and effect a stale value of CP0_STATUS when executing the mtc0 instruction. This commit avoids this scenario by incrementing the preempt count before the mfc0 and decrementing it after the mtc9. [ralf@linux-mips.org: This patch is sorting out the part that were missed by e97c5b6098 [MIPS: Make irqflags.h functions preempt-safe for non-mipsr2 cpus.] I also re-enabled the inclusion of <asm/asm-offsets.h> at the top of <asm/asmmacro.h>]. Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/6164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 20 March 2014, 12:46:15 UTC
004e5cf Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Just fixed resource release issue at open fail. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: Fix (more) freeing issues in exynos_drm_drv.c 20 March 2014, 03:20:00 UTC
85d898b drm/exynos: Fix (more) freeing issues in exynos_drm_drv.c The following commit [0] fixed a use-after-free, but left the subdrv open in the error path. [0] commit 6ca605f7c70895a35737435f17ae9cc5e36f1466 drm/exynos: Fix freeing issues in exynos_drm_drv.c Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> 20 March 2014, 02:42:24 UTC
8878439 mm: fix bad rss-counter if remap_file_pages raced migration Fix some "Bad rss-counter state" reports on exit, arising from the interaction between page migration and remap_file_pages(): zap_pte() must count a migration entry when zapping it. And yes, it is possible (though very unusual) to find an anon page or swap entry in a VM_SHARED nonlinear mapping: coming from that horrid get_user_pages(write, force) case which COWs even in a shared mapping. Signed-off-by: Hugh Dickins <hughd@google.com> Tested-by: Sasha Levin sasha.levin@oracle.com> Tested-by: Dave Jones davej@redhat.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 March 2014, 23:21:49 UTC
7c1cfac Merge tag 'pci-v3.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI resource management fix from Bjorn Helgaas: "This is a fix for an AGP regression exposed by e501b3d87f00 ("agp: Support 64-bit APBASE"), which we merged in v3.14-rc1. We've warned about the conflict between the GART and PCI resources and cleared out the PCI resource for a long time, but after e501b3d87f00, we still *use* that cleared-out PCI resource. I think the GART resource is incorrect, so this patch removes it" * tag 'pci-v3.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "[PATCH] Insert GART region into resource map" 19 March 2014, 23:15:54 UTC
7c38953 Merge branch 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "One really late cgroup patch to fix error path in create_css(). Hitting this bug would be pretty rare but still possible and it gets delayed we'd need to backport it through -stable anyway. It only updates error path in create_css() and has low chance of new breakages" * 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix a failure path in create_css() 19 March 2014, 23:13:40 UTC
2eddb70 MIPS: Octeon: Fix warning in of_device_alloc on cn3xxx Starting with commit 3da5278727a895d49a601f67fd49dffa0b80f9a5 (of/irq: Rework of_irq_count()) the following warning is triggered on octeon cn3xxx: [ 0.887281] WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x228/0x230() [ 0.895642] Modules linked in: [ 0.898689] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc7-00012-g9ae51f2-dirty #41 [ 0.906860] Stack : c8b439581166d96e ffffffff816b0000 0000000040808000 ffffffff81185ddc [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 000000000000000b [ 0.906860] 000000000000000a 000000000000000a 0000000000000000 0000000000000000 [ 0.906860] ffffffff81740000 ffffffff81720000 ffffffff81615900 ffffffff816b0177 [ 0.906860] ffffffff81727d10 800000041f868fb0 0000000000000001 0000000000000000 [ 0.906860] 0000000000000000 0000000000000038 0000000000000001 ffffffff81568484 [ 0.906860] 800000041f86faa8 ffffffff81145ddc 0000000000000000 ffffffff811873f4 [ 0.906860] 800000041f868b88 800000041f86f9c0 0000000000000000 ffffffff81569c9c [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 0.906860] 0000000000000000 ffffffff811205e0 0000000000000000 0000000000000000 [ 0.906860] ... [ 0.971695] Call Trace: [ 0.974139] [<ffffffff811205e0>] show_stack+0x68/0x80 [ 0.979183] [<ffffffff81569c9c>] dump_stack+0x8c/0xe0 [ 0.984196] [<ffffffff81145efc>] warn_slowpath_common+0x84/0xb8 [ 0.990110] [<ffffffff81436888>] of_device_alloc+0x228/0x230 [ 0.995726] [<ffffffff814368d8>] of_platform_device_create_pdata+0x48/0xd0 [ 1.002593] [<ffffffff81436a94>] of_platform_bus_create+0x134/0x1e8 [ 1.008837] [<ffffffff81436af8>] of_platform_bus_create+0x198/0x1e8 [ 1.015064] [<ffffffff81436cc4>] of_platform_bus_probe+0xa4/0x100 [ 1.021149] [<ffffffff81100570>] do_one_initcall+0xd8/0x128 [ 1.026701] [<ffffffff816e2a10>] kernel_init_freeable+0x144/0x210 [ 1.032753] [<ffffffff81564bc4>] kernel_init+0x14/0x110 [ 1.037973] [<ffffffff8111bb44>] ret_from_kernel_thread+0x14/0x1c With this commit the kernel starts mapping the interrupts listed for gpio-controller node. irq_domain_ops for CIU (octeon_irq_ciu_map and octeon_irq_ciu_xlat) refuse to handle the GPIO lines (returning -EINVAL) and this is causing above warning in of_device_alloc(). Modify irq_domain_ops for CIU and CIU2 to "gracefully handle" GPIO lines (neither return error code nor call octeon_irq_set_ciu_mapping for it). This should avoid the warning. (As before the real setup for GPIO lines will happen using irq_domain_ops of gpio-controller.) This patch is based on Wei's patch v2 (see http://marc.info/?l=linux-mips&m=139511814813247). Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Reported-by: Yang Wei <wei.yang@windriver.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6624/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 19 March 2014, 22:50:30 UTC
b08ac66 MIPS: ftrace: Tweak safe_load()/safe_store() macros Due to name collision in ftrace safe_load and safe_store macros, these macros cannot take expressions as operands. For example, compiler will complain for a macro call like the following: safe_store_code(new_code2, ip + 4, faulted); arch/mips/include/asm/ftrace.h:61:6: note: in definition of macro 'safe_store' : [dst] "r" (dst), [src] "r" (src)\ ^ arch/mips/kernel/ftrace.c:118:2: note: in expansion of macro 'safe_store_code' safe_store_code(new_code2, ip + 4, faulted); ^ arch/mips/kernel/ftrace.c:118:32: error: undefined named operand 'ip + 4' safe_store_code(new_code2, ip + 4, faulted); ^ arch/mips/include/asm/ftrace.h:61:6: note: in definition of macro 'safe_store' : [dst] "r" (dst), [src] "r" (src)\ ^ arch/mips/kernel/ftrace.c:118:2: note: in expansion of macro 'safe_store_code' safe_store_code(new_code2, ip + 4, faulted); ^ This build error is triggered by a4671094 [MIPS: ftrace: Fix icache flush range error]. Tweak variable naming in those macros to allow flexible operands. Signed-off-by: Viller Hsiao <villerhsiao@gmail.com> Cc: linux-mips@linux-mips.org Cc: rostedt@goodmis.org Cc: fweisbec@gmail.com Cc: mingo@redhat.com Cc: Qais.Yousef@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/6622/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 19 March 2014, 22:18:40 UTC
55ae26b Merge tag 'drm-intel-fixes-2014-03-19' of git://anongit.freedesktop.org/drm-intel into drm-fixes two more fixes, both regressions. * tag 'drm-intel-fixes-2014-03-19' of git://anongit.freedesktop.org/drm-intel: drm/i915: Disable stolen memory when DMAR is active Revert "drm/i915: don't touch the VDD when disabling the panel" 19 March 2014, 21:17:31 UTC
ae99615 via-rhine: Disable device in error path Currently, via-rhine fails to call pci_disable_device() for errors in rhine_init_one(). Reported-by: Huqiu Liu <liuhq11@mails.tsinghua.edu.cn> Signed-off-by: Roger Luethi <rl@hellgate.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2014, 20:08:29 UTC
ea1cd65 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single bugfix: make the scheduler clock on Vybrid SoCs count forward" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: vf_pit_timer: use complement for sched_clock reading 19 March 2014, 16:05:38 UTC
749d322 ALSA: compress: Pass through return value of open ops callback The snd_compr_open function would always return 0 even if the compressed ops open function failed, obviously this is incorrect. Looks like this was introduced by a small typo in: commit a0830dbd4e42b38aefdf3fb61ba5019a1a99ea85 ALSA: Add a reference counter to card instance This patch returns the value from the compressed op as it should. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 19 March 2014, 14:46:24 UTC
4fe2169 MIPS: BCM47XX: Check all (32) GPIOs when looking for a pin Broadcom boards support 32 GPIOs and NVRAM may have entires for higher ones too. Example: gpio23=wombo_reset Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: Rafał Miłecki <zajec5@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6547/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 19 March 2014, 08:28:10 UTC
0f4706d drm/i915: Disable stolen memory when DMAR is active We have reports of heavy screen corruption if we try to use the stolen memory reserved by the BIOS whilst the DMA-Remapper is active. This quirk may be only specific to a few machines or BIOSes, but first lets apply the big hammer and always disable use of stolen memory when DMAR is active. v2 by Jani: Rebase on -fixes, only look at intel_iommu_gfx_mapped. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68535 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> 19 March 2014, 08:05:38 UTC
8259383 Revert "drm/i915: don't touch the VDD when disabling the panel" This reverts commit dff392dbd258381a6c3164f38420593f2d291e3b Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Dec 6 17:32:41 2013 -0200 drm/i915: don't touch the VDD when disabling the panel which didn't take into account commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel and commit 35a38556d900b9cb5dfa2529c93944b847f8a8a4 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Aug 12 22:17:14 2012 +0200 drm/i915: reorder edp disabling to fix ivb MacBook Air Unsurprisingly, various MacBooks failed. Effectively the same has already been done in drm-intel-next-queued. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74628 Tested-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> 19 March 2014, 08:03:57 UTC
3eb59ec cgroup: fix a failure path in create_css() If online_css() fails, we should remove cgroup files belonging to css->ss. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> 18 March 2014, 21:15:36 UTC
707d4ee Revert "[PATCH] Insert GART region into resource map" This reverts commit 56dd669a138c, which makes the GART visible in /proc/iomem. This fixes a regression: e501b3d87f00 ("agp: Support 64-bit APBASE") exposed an existing problem with a conflict between the GART region and a PCI BAR region. The GART addresses are bus addresses, not CPU addresses, and therefore should not be inserted in iomem_resource. On many machines, the GART region is addressable by the CPU as well as by an AGP master, but CPU addressability is not required by the spec. On some of these machines, the GART is mapped by a PCI BAR, and in that case, the PCI core automatically inserts it into iomem_resource, just as it does for all BARs. Inserting it here means we'll have a conflict if the PCI core later tries to claim the GART region, so let's drop the insertion here. The conflict indirectly causes X failures, as reported by Jouni in the bugzilla below. We detected the conflict even before e501b3d87f00, but after it the AGP code (fix_northbridge()) uses the PCI resource (which is zeroed because of the conflict) instead of reading the BAR again. Conflicts: arch/x86_64/kernel/aperture.c Fixes: e501b3d87f00 agp: Support 64-bit APBASE Link: https://bugzilla.kernel.org/show_bug.cgi?id=72201 Reported-and-tested-by: Jouni Mettälä <jtmettala@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 18 March 2014, 20:26:12 UTC
3e3d354 ATHEROS-ATL1E: Convert iounmap to pci_iounmap Use pci_iounmap instead of iounmap when the virtual mapping was done with pci_iomap. A simplified version of the semantic patch that finds this issue is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression addr; @@ addr = pci_iomap(...) @rr@ expression r.addr; @@ * iounmap(addr) // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 20:12:56 UTC
7346135 vxlan: fix potential NULL dereference in arp_reduce() This patch fixes a NULL pointer dereference in the event of an skb allocation failure in arp_reduce(). Signed-Off-By: David L Stevens <dlstevens@us.ibm.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 20:09:34 UTC
0df04c4 Merge branch 'cnic-net' Michael Chan says: ==================== cnic bug fixes for net-next Michael Chan (3): cnic: Use proper ulp_ops for per device operations. cnic,bnx2i,bnx2fc: Fix inconsistent use of page size cnic: Update version to 2.5.20 and copyright year. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 20:03:44 UTC
c366128 cnic: Update version to 2.5.20 and copyright year. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 20:02:16 UTC
be1fefc cnic,bnx2i,bnx2fc: Fix inconsistent use of page size The bnx2/bnx2x rings are made up of linked pages. However there is an upper limit on the page size as some the page size settings are 16-bit in the hardware/firmware interface. In the current code, some parts use BNX2_PAGE_SIZE which has a 16K upper limit and some parts use PAGE_SIZE. On archs with >= 64K PAGE_SIZE, it generates some compile warnings. Define a new CNIC_PAGE_SZIE which has an upper limit of 16K and use it consistently in all relevant parts. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 20:02:16 UTC
f7bd12d cnic: Use proper ulp_ops for per device operations. For per device operations, cnic needs to dereference the RCU protected cp->ulp_ops instead of the global cnic_ulp_tbl. In 2 locations, cnic_send_nlmsg() and cnic_copy_ulp_stats(), it was referencing the global table. If the device has been unregistered and these functions are still being called (very unlikely scenarios), it could lead to NULL pointer dereference. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 20:02:16 UTC
ff0992e net: cdc_ncm: fix control message ordering This is a context modified revert of commit 6a9612e2cb22 ("net: cdc_ncm: remove ncm_parm field") which introduced a NCM specification violation, causing setup errors for some devices. These errors resulted in the device and host disagreeing about shared settings, with complete failure to communicate as the end result. The NCM specification require that many of the NCM specific control reuests are sent only while the NCM Data Interface is in alternate setting 0. Reverting the commit ensures that we follow this requirement. Fixes: 6a9612e2cb22 ("net: cdc_ncm: remove ncm_parm field") Reported-and-tested-by: Pasi Kärkkäinen <pasik@iki.fi> Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 19:32:32 UTC
e367c2d ipv6: ip6_append_data_mtu do not handle the mtu of the second fragment properly In ip6_append_data_mtu(), when the xfrm mode is not tunnel(such as transport),the ipsec header need to be added in the first fragment, so the mtu will decrease to reserve space for it, then the second fragment come, the mtu should be turn back, as the commit 0c1833797a5a6ec23ea9261d979aa18078720b74 said. however, in the commit a493e60ac4bbe2e977e7129d6d8cbb0dd236be, it use *mtu = min(*mtu, ...) to change the mtu, which lead to the new mtu is alway equal with the first fragment's. and cannot turn back. when I test through ping6 -c1 -s5000 $ip (mtu=1280): ...frag (0|1232) ESP(spi=0x00002000,seq=0xb), length 1232 ...frag (1232|1216) ...frag (2448|1216) ...frag (3664|1216) ...frag (4880|164) which should be: ...frag (0|1232) ESP(spi=0x00001000,seq=0x1), length 1232 ...frag (1232|1232) ...frag (2464|1232) ...frag (3696|1232) ...frag (4928|116) so delete the min() when change back the mtu. Signed-off-by: Xin Long <lucien.xin@gmail.com> Fixes: 75a493e60ac4bb ("ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size") Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 19:17:53 UTC
d1958f8 isdn/capi: Make Middleware depend on CAPI2.0 The Kconfig symbol ISDN_CAPI_MIDDLEWARE is only used in capi.c. Setting it without setting ISDN_CAPI_CAPI20 is therefor useless. Make it depend on ISDN_CAPI_CAPI20 and put its entry after ISDN_CAPI_CAPI20's entry. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 19:02:57 UTC
4907cdc Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull another kvm fix from Paolo Bonzini: "A fix for a PowerPC bug that was introduced during the 3.14 merge window" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Fix register usage when loading/saving VRSAVE KVM: PPC: Book3S HV: Remove bogus duplicate code 18 March 2014, 18:32:08 UTC
72c2dfd Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== 1) Fix a sleep in atomic when pfkey_sadb2xfrm_user_sec_ctx() is called from pfkey_compile_policy(). Fix from Nikolay Aleksandrov. 2) security_xfrm_policy_alloc() can be called in process and atomic context. Add an argument to let the callers choose the appropriate way. Fix from Nikolay Aleksandrov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 16:42:33 UTC
3055644 ALSA: oxygen: Xonar DG(X): fix Stereo Upmixing regression The code introduced in commit 1f91ecc14dee ("ALSA: oxygen: modify adjust_dg_dac_routing function") accidentally disregarded the old value of the playback routing register, so it broke the "Stereo Upmixing" mixer control. The unmuted parts of the channel routing are the same for all settings of the output destination, so it suffices to revert that part of the patch. Fixes: 1f91ecc14dee ('ALSA: oxygen: modify adjust_dg_dac_routing function') Tested-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 March 2014, 08:51:58 UTC
7c144bf Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull two 'perf bench' fixes from Arnaldo: * Make 'perf bench mem' (i.e. no args) mean 'run all tests' so that we can run all tests, not stopping at the numa ones. (Arnaldo Carvalho de Melo) * Fix NULL pointer dereference after last test in in "perf bench all" (Patrick Palka) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> 18 March 2014, 08:21:42 UTC
e4362d1 MIPS: Fix possible build error with transparent hugepages enabled If CONFIG_TRANSPARENT_HUGEPAGE is enabled, but CONFIG_HUGETLB_PAGE is not, it is possible to end up with a configuration that fails to build with the following error: include/linux/huge_mm.h:125:2: error: #error "hugepages can't be allocated by the buddy allocator" This is due to CONFIG_FORCE_MAX_ZONEORDER defaulting to 11. It already has ranges that change the valid values when HUGETLB_PAGE is enabled, but this is not done for TRANSPARENT_HUGEPAGE. Fix by changing the HUGETLB_PAGE dependencies to MIPS_HUGE_TLB_SUPPORT, which includes both TRANSPARENT_HUGEPAGE and HUGETLB_PAGE. Signed-off-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6391/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 18 March 2014, 07:18:11 UTC
27410e8 drm: Fix use-after-free in the shadow-attache exit code This regression has been introduced in commit b3f2333de8e81b089262b26d52272911523e605f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Dec 11 11:34:31 2013 +0100 drm: restrict the device list for shadow attached drivers Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 18 March 2014, 03:09:03 UTC
2182127 Merge tag 'drm-intel-fixes-2014-03-17' of git://anongit.freedesktop.org/drm-intel into drm-fixes Two 3.14 specific fixes, two cc: stable. * tag 'drm-intel-fixes-2014-03-17' of git://anongit.freedesktop.org/drm-intel: drm/i915: Don't enable display error interrupts from the start drm/i915: Fix scanline counter fixup on BDW drm/i915: Add a workaround for HSW scanline counter weirdness drm/i915: Fix PSR programming 18 March 2014, 03:06:17 UTC
b085f31 net: cpsw: do not register cpts twice commit f280e89a (drivers: net: cpsw: fix for cpsw crash when build as modules) moved cpts_register()/cpts_unregister() to ndo_open()/ndo_stop(), but failed to remove cpts_register in cpsw_probe() which leads to a double registration and the following debug object splat. [ 18.991902] ODEBUG: init active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x2c [ 19.082249] [<c0059e80>] (init_timer_key) from [<c04965d4>] (cpts_register+0x1f0/0x2c4) [ 19.090642] [<c04965d4>] (cpts_register) from [<c04931dc>] (cpsw_ndo_open+0x780/0x81c) [ 19.098948] [<c04931dc>] (cpsw_ndo_open) from [<c0599c2c>] (__dev_open+0xb4/0x118) Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 02:17:32 UTC
9a15c94 Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull final final block IO fixes from Jens Axboe: "Yes, the last round was final. This one is final final. The mtip32xx fix could have waited, but it's so simple and gets rid of two warning spewages on load. The two block flush fixes are critical for blk-mq, and are the primary reason for this late pull request" * 'for-linus' of git://git.kernel.dk/linux-block: mtip32xx: fix bad use of smp_processor_id() block: change flush sequence list addition back to front add block: fix q->flush_rq NULL pointer crash on dm-mpath flush 17 March 2014, 23:54:49 UTC
8a21d9f Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "A fair number of fixes all across arch/mips. Nothing really stands out though APRP, the FPU code and syscall tracing code received multiple patches those all were small" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: mark O32+FP64 experimental for now MIPS: ftrace: Fix icache flush range error MIPS: Fix syscall tracing interface MIPS: asm: syscall: Fix copying system call arguments MIPS: Octeon: Fix fall through on bar type OCTEON_DMA_BAR_TYPE_SMALL MIPS: FPU: Fix conflict of register usage MIPS: Replace CONFIG_MIPS64 and CONFIG_MIPS32_R2 MIPS: math-emu: Fix prefx detection and COP1X function field definition MIPS: APRP: Choose the correct VPE loader by fixing the linking MIPS: APRP: Unregister rtlx interrupt hook at module exit MIPS: APRP: Fix the linking of rtlx interrupt hook MIPS: bcm47xx: Include missing errno.h for ENXIO MIPS: Alchemy: Fix unchecked kstrtoul return value MIPS: Fix randconfig build error. 17 March 2014, 23:53:18 UTC
8d7f1fb ATHEROS-ALX: Use dma_set_mask_and_coherent and fix a bug 1. For the 64 bits dma mask use dma_set_mask_and_coherent instead of dma_set_mask and dma_set_coherent_mask. 2. For the 32 bits dma mask dma_set_coherent_mask is only called if dma_set_mask fails, which is unusual. Assuming this as a bug, fixes it by replacing calls to dma_set_mask and dma_set_coherent_mask by a call to dma_set_mask_and_coherent. Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Tested-by: Jonas Hahnfeld <hahnjo@hahnjo.de> Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2014, 21:19:45 UTC
151b628 sparc64:tsb.c:use array size macro rather than number This is a small patch which uses ARRAY_SIZE macro rather than a number to make code readability better. Signed-off-by: Doug Wilson <doug.lkml@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2014, 19:55:49 UTC
1535bd8 sparc64: don't treat 64-bit syscall return codes as 32-bit When checking a system call return code for an error, linux_sparc_syscall was sign-extending the lower 32-bit value and comparing it to -ERESTART_RESTARTBLOCK. lseek can return valid return codes whose lower 32-bits alone would indicate a failure (such as 4G-1). Use the whole 64-bit value to check for errors. Only the 32-bit path should sign extend the lower 32-bit value. Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Acked-by: Bob Picco <bob.picco@oracle.com> Acked-by: Allen Pais <allen.pais@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2014, 19:54:52 UTC
06e2e88 MIPS: mark O32+FP64 experimental for now Commit 597ce1723e0f "MIPS: Support for 64-bit FP with O32 binaries" introduced support for setting Status.FR=1 for O32 binaries with the EF_MIPS_FP64 ELF header flag set. Whilst this flag is currently supported by binutils it does introduce an ABI break within userland. Objects built with EF_MIPS_FP64 cannot be safely linked with those built without it since code in either object may assume behaviour specific to a value of FR. More recently there has been discussion around avoiding further fragmentation of the O32 ABI whilst still allowing the use of FR=1 and features such as MSA which depend upon it. Details of the plan to allow this are still being worked on, and whilst the kernel will need the ability to handle FR=1 with O32 tasks it is unclear what else it may need to provide to a userland which seeks to avoid another ABI break. In order to prevent the proliferation of userland which may rely upon the current EF_MIPS_FP64 behaviour this patch marks the kernel support for it experimental & disables it by default. Under current proposals it is likely that this support can simply be enabled again later, but possibly after the introduction of further interfaces with userland and support for the MIPS R5 UFR feature. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Paul Burton <paul.burton@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/6549/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 17 March 2014, 15:06:12 UTC
9f8b483 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fix for ordering of device removal actions in hidraw, by Fernando Luis Vázquez Cao - fix for uninitialized workqueue usage in hid-sony, by Frank Praznik - device ID addition for new variant of Logitech G27, from Simon Wood * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hid-lg4ff: Support new version of G27 HID: hidraw: fix warning destroying hidraw device files after parent HID: sony: Fix work queue issues. 17 March 2014, 15:00:50 UTC
a467109 MIPS: ftrace: Fix icache flush range error In 32-bit mode, the start address passed to flush_icache_range is shifted by 4 bytes before the second safe_store_code() call. This causes system crash from time to time because the first 4 bytes might not be flushed properly. This bug exists since linux-3.8. Also remove obsoleted comment while at it. Signed-off-by: Viller Hsiao <villerhsiao@gmail.com> Cc: linux-mips@linux-mips.org Cc: rostedt@goodmis.org Cc: fweisbec@gmail.com Cc: mingo@redhat.com Cc: Qais.Yousef@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/6586/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 17 March 2014, 14:42:07 UTC
86ca57b MIPS: Fix syscall tracing interface Fix pointer computation for stack-based arguments. Signed-off-by: Lars Persson <larper@axis.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6620/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 17 March 2014, 14:38:38 UTC
a8031d2 MIPS: asm: syscall: Fix copying system call arguments The syscall_get_arguments function expects the arguments to be copied to the '*args' argument but instead a local variable was used to hold the system call argument. As a result of which, this variable was never passed to the filter and any filter testing the system call arguments would fail. This is fixed by passing the '*args' variable as the destination memory for the system call arguments. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6402/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 17 March 2014, 14:34:28 UTC
dcb99fd Linux 3.14-rc7 17 March 2014, 01:51:24 UTC
59bf6c3 Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Three small fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/clock: Prevent tracing recursion in sched_clock_cpu() stop_machine: Fix^2 race between stop_two_cpus() and stop_cpus() sched/deadline: Deny unprivileged users to set/change SCHED_DEADLINE policy 16 March 2014, 17:42:07 UTC
b44eeb4 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc smaller fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix leak in uncore_type_init failure paths perf machine: Use map as success in ip__resolve_ams perf symbols: Fix crash in elf_section_by_name perf trace: Decode architecture-specific signal numbers 16 March 2014, 17:41:21 UTC
4f87dac ipc: Fix 2 bugs in msgrcv() MSG_COPY implementation While testing and documenting the msgrcv() MSG_COPY flag that Stanislav Kinsbursky added in commit 4a674f34ba04 ("ipc: introduce message queue copy feature" => kernel 3.8), I discovered a couple of bugs in the implementation. The two bugs concern MSG_COPY interactions with other msgrcv() flags, namely: (A) MSG_COPY + MSG_EXCEPT (B) MSG_COPY + !IPC_NOWAIT The bugs are distinct (and the fix for the first one is obvious), however my fix for both is a single-line patch, which is why I'm combining them in a single mail, rather than writing two mails+patches. ===== (A) MSG_COPY + MSG_EXCEPT ===== With the addition of the MSG_COPY flag, there are now two msgrcv() flags--MSG_COPY and MSG_EXCEPT--that modify the meaning of the 'msgtyp' argument in unrelated ways. Specifying both in the same call is a logical error that is currently permitted, with the effect that MSG_COPY has priority and MSG_EXCEPT is ignored. The call should give an error if both flags are specified. The patch below implements that behavior. ===== (B) (B) MSG_COPY + !IPC_NOWAIT ===== The test code that was submitted in commit 3a665531a3b7 ("selftests: IPC message queue copy feature test") shows MSG_COPY being used in conjunction with IPC_NOWAIT. In other words, if there is no message at the position 'msgtyp'. return immediately with the error in ENOMSG. What was not (fully) tested is the behavior if MSG_COPY is specified *without* IPC_NOWAIT, and there is an odd behavior. If the queue contains less than 'msgtyp' messages, then the call blocks until the next message is written to the queue. At that point, the msgrcv() call returns a copy of the newly added message, regardless of whether that message is at the ordinal position 'msgtyp'. This is clearly bogus, and problematic for applications that might want to make use of the MSG_COPY flag. I considered the following possible solutions to this problem: (1) Force the call to block until a message *does* appear at the position 'msgtyp'. (2) If the MSG_COPY flag is specified, the kernel should implicitly add IPC_NOWAIT, so that the call fails with ENOMSG for this case. (3) If the MSG_COPY flag is specified, but IPC_NOWAIT is not, generate an error (probably, EINVAL is the right one). I do not know if any application would really want to have the functionality of solution (1), especially since an application can determine in advance the number of messages in the queue using msgctl() IPC_STAT. Obviously, this solution would be the most work to implement. Solution (2) would have the effect of silently fixing any applications that tried to employ broken behavior. However, it would mean that if we later decided to implement solution (1), then user-space could not easily detect what the kernel supports (but, since I'm somewhat doubtful that solution (1) is needed, I'm not sure that this is much of a problem). Solution (3) would have the effect of informing broken applications that they are doing something broken. The downside is that this would cause a ABI breakage for any applications that are currently employing the broken behavior. However: a) Those applications are almost certainly not getting the results they expect. b) Possibly, those applications don't even exist, because MSG_COPY is currently hidden behind CONFIG_CHECKPOINT_RESTORE. The upside of solution (3) is that if we later decided to implement solution (1), user-space could determine what the kernel supports, via the error return. In my view, solution (3) is mildly preferable to solution (2), and solution (1) could still be done later if anyone really cares. The patch below implements solution (3). PS. For anyone out there still listening, it's the usual story: documenting an API (and the thinking about, and the testing of the API, that documentation entails) is the one of the single best ways of finding bugs in the API, as I've learned from a lot of experience. Best to do that documentation before releasing the API. Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: stable@vger.kernel.org Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 March 2014, 17:41:04 UTC
3b4df68 Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of six fixes. Two are instant crash/null deref types (storvsc and isci). The two qla2xxx are initialisation problems that cause MSI-X failures and card misdetection, the isci erroneous macro is actually illegal C that's causing a miscompile with certain gcc versions and the be2iscsi bad if expression is a static checker fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] storvsc: NULL pointer dereference fix [SCSI] qla2xxx: Poll during initialization for ISP25xx and ISP83xx [SCSI] isci: correct erroneous for_each_isci_host macro [SCSI] isci: fix reset timeout handling [SCSI] be2iscsi: fix bad if expression [SCSI] qla2xxx: Fix multiqueue MSI-X registration. 15 March 2014, 19:41:53 UTC
ee7d07e Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Please pull these last(?) few wireless bits intended for the 3.14 stream. Each is here to address a problem found with a patch already merged... Dave Jones gives us a memory leak fix, for an error path in brcmfmac. Felix Fietkau moves a small delay to make it actually reachable. Helmut Schaa fixes an ath9k sequence numbering problem for non-data frames. Stanislaw Gruszka reverts an earlier fix that was found to cause random connection drops on RT5390 PCI adapters ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 15 March 2014, 02:50:25 UTC
32fc3fd net: phy: fix uninitalized ethtool_wolinfo in phy_suspend Callers of phy_ethtool_get_wol are supposed to provide a properly cleared struct ethtool_wolinfo. Therefore, fix phy_suspend to clear it before passing it to phy_ethtool_get_wol. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 15 March 2014, 02:38:54 UTC
fcad3e6 MAINTAINERS: Add linux.nics@intel.com to INTEL ETHERNET DRIVERS If this is added to the driver files, then maybe it's appropriate to add to MAINTAINERS as well. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 March 2014, 02:36:49 UTC
a4ecdf8 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "Two x86 fixes: Suresh's eager FPU fix, and a fix to the NUMA quirk for AMD northbridges. This only includes Suresh's fix patch, not the "mostly a cleanup" patch which had __init issues" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/amd/numa: Fix northbridge quirk to assign correct NUMA node x86, fpu: Check tsk_used_math() in kernel_fpu_end() for eager FPU 15 March 2014, 01:07:51 UTC
cee152f Merge tag 'pm+acpi-3.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "Three of these are regression fixes, for two recent regressions and one introduced during the 3.13 cycle, and the fourth one is a working version of the fix that had to be reverted last time. Specifics: - A recent ACPI resources handling fix overlooked the fact that it had to update the ACPI PNP subsystem's resources parsing too and caused confusing warning messages to be printed during system intialization on some systems (with arguably buggy ACPI tables). Fix from Zhang Rui. - Moving the early ACPI initialization before timekeeping_init() earlier in this cycle broke fast TSC calibration on at least one system, so it needs to be done later, but still before efi_enter_virtual_mode() to allow the EFI initialization to refer to ACPI. - A change related to code duplication reduction in the cpufreq core inadvertently caused cpufreq intialization to fail for some CPUs handled by intel_pstate by adding checks that may fail for that driver, but aren't even necessary when it is used. The issue is addressed by preventing those checks from run in the configurations in which they aren't needed. - If the Hardware Reduced ACPI flag is set in the ACPI tables, system suspend, hibernation and ACPI power off will only work when special sleep control and sleep status registeres are provided (their addresses in the ACPI tables are not zero). If those registers are not available, the features in question have no chances to work, so they shouldn't even be regarded as supported. That helps with power off in particular, because alternative power off methods may be used then and they may actually work" * tag 'pm+acpi-3.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / sleep: Add extra checks for HW Reduced ACPI mode sleep states ACPI / init: Invoke early ACPI initialization later cpufreq: Skip current frequency initialization for ->setpolicy drivers PNP / ACPI: proper handling of ACPI IO/Memory resource parsing failures 15 March 2014, 01:02:02 UTC
0c01b45 Merge tag 'dm-3.14-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device-mapper fixes form Mike Snitzer: "Two small fixes for the DM cache target: - fix corruption with >2TB fast device due to truncation bug - fix access beyond end of origin device due to a partial block" * tag 'dm-3.14-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: fix access beyond end of origin device dm cache: fix truncation bug when copying a block to/from >2TB fast device 15 March 2014, 01:01:23 UTC
7f02c46 MIPS: Octeon: Fix fall through on bar type OCTEON_DMA_BAR_TYPE_SMALL Bar type OCTEON_DMA_BAR_TYPE_SMALL assigns lo and hi addresses and then falls through to OCTEON_DMA_BAR_TYPE_BIG that re-assignes lo and hi addresses with totally different values. Add a break so we don't fall through. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/6529/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 March 2014, 23:46:23 UTC
8c35743 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 14 March 2014, 18:09:47 UTC
b616365 MIPS: FPU: Fix conflict of register usage In _restore_fp_context/_restore_fp_context32, t0 is used for both CP0_Status and CP1_FCSR. This is a mistake and cause FP exeception on boot, so fix it. Signed-off-by: Huacai Chen <chenhc@lemote.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Andreas Barth <aba@ayous.org> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6507/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 March 2014, 16:49:23 UTC
f5868f0 MIPS: Replace CONFIG_MIPS64 and CONFIG_MIPS32_R2 Commit 597ce1723e0f ("MIPS: Support for 64-bit FP with O32 binaries") introduced references to two undefined Kconfig macros. CONFIG_MIPS32_R2 should clearly be replaced with CONFIG_CPU_MIPS32_R2. And CONFIG_MIPS64 should be replaced with CONFIG_64BIT. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/6522/ Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 14 March 2014, 16:49:16 UTC
6eeefcc perf bench: Fix NULL pointer dereference in "perf bench all" The for_each_bench() macro must check that the "benchmarks" field of a collection is not NULL before dereferencing it because the "all" collection in particular has a NULL "benchmarks" field (signifying that it has no benchmarks to iterate over). This fixes this NULL pointer dereference when running "perf bench all": [root@ssdandy ~]# perf bench all <SNIP> # Running mem/memset benchmark... # Copying 1MB Bytes ... 2.453675 GB/Sec 12.056327 GB/Sec (with prefault) Segmentation fault (core dumped) [root@ssdandy ~]# Signed-off-by: Patrick Palka <patrick@parcs.ath.cx> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1394664051-6037-1-git-send-email-patrick@parcs.ath.cx Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 14 March 2014, 16:45:54 UTC
6b5625b HID: hid-lg4ff: Support new version of G27 It has been reported that there is a new hardware version of the G27 in the 'wild'. This patch add's this new revision so that it can be sent the command to switch to native mode. Reported-by: "Ivan Baldo" <ibaldo@adinet.com.uy> Tested-by: "evilcow" <evilcow93@yahoo.com> Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 14 March 2014, 14:43:34 UTC
0fae799 perf bench numa: Make no args mean 'run all tests' If we call just: perf bench numa mem it will present the same output as: perf bench numa mem -h i.e. ask for instructions about what to run. While that is kinda ok, using 'run all tests' as the default, i.e. making 'no parms' be equivalent to: perf bench numa mem -a Will allow: perf bench numa all to actually do what is asked: i.e. run all the 'bench' tests, instead of responding to that by asking what to do. That, in turn, allows: perf bench all to actually complete, for the same reasons. And after that, the tests that come after that, and that at some point hit a NULL deref, will run, allowing me to reproduce a recently reported problem. That when you have the needed numa libraries, which wasn't the case for the reporter, making me a bit confused after trying to reproduce his report. So make no parms mean -a. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Patrick Palka <patrick@parcs.ath.cx> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-x7h0ghx4pef4n0brywg21krk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 14 March 2014, 13:04:10 UTC
847d797 x86/amd/numa: Fix northbridge quirk to assign correct NUMA node For systems with multiple servers and routed fabric, all northbridges get assigned to the first server. Fix this by also using the node reported from the PCI bus. For single-fabric systems, the northbriges are on PCI bus 0 by definition, which are on NUMA node 0 by definition, so this is invarient on most systems. Tested on fam10h and fam15h single and multi-fabric systems and candidate for stable. Signed-off-by: Daniel J Blueman <daniel@numascale.com> Acked-by: Steffen Persvold <sp@numascale.com> Acked-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1394710981-3596-1-git-send-email-daniel@numascale.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 14 March 2014, 10:05:36 UTC
c60f7d5 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Pretty minor set of fixes for radeon, ttm and vmwgfx. The ttm ones are a regression and an oops seen on server chipsets" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Fix a surface reference corner-case in legacy emulation mode drm/radeon/cik: properly set compute ring status on disable drm/radeon/cik: stop the sdma engines in the enable() function drm/radeon/cik: properly set sdma ring status on disable drm/radeon: fix runpm disabling on non-PX harder drm/ttm: don't oops if no invalidate_caches() drm/ttm: Work around performance regression with VM_PFNMAP 14 March 2014, 04:32:16 UTC
c14c06b Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c Kconfig fix from Wolfram Sang. * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Remove usage of orphaned symbol OF_I2C 14 March 2014, 04:25:40 UTC
53611c0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: "I know this is a bit more than you want to see, and I've told the wireless folks under no uncertain terms that they must severely scale back the extent of the fixes they are submitting this late in the game. Anyways: 1) vmxnet3's netpoll doesn't perform the equivalent of an ISR, which is the correct implementation, like it should. Instead it does something like a NAPI poll operation. This leads to crashes. From Neil Horman and Arnd Bergmann. 2) Segmentation of SKBs requires proper socket orphaning of the fragments, otherwise we might access stale state released by the release callbacks. This is a 5 patch fix, but the initial patches are giving variables and such significantly clearer names such that the actual fix itself at the end looks trivial. From Michael S. Tsirkin. 3) TCP control block release can deadlock if invoked from a timer on an already "owned" socket. Fix from Eric Dumazet. 4) In the bridge multicast code, we must validate that the destination address of general queries is the link local all-nodes multicast address. From Linus Lüssing. 5) The x86 BPF JIT support for negative offsets puts the parameter for the helper function call in the wrong register. Fix from Alexei Starovoitov. 6) The descriptor type used for RTL_GIGA_MAC_VER_17 chips in the r8169 driver is incorrect. Fix from Hayes Wang. 7) The xen-netback driver tests skb_shinfo(skb)->gso_type bits to see if a packet is a GSO frame, but that's not the correct test. It should use skb_is_gso(skb) instead. Fix from Wei Liu. 8) Negative msg->msg_namelen values should generate an error, from Matthew Leach. 9) at86rf230 can deadlock because it takes the same lock from it's ISR and it's hard_start_xmit method, without disabling interrupts in the latter. Fix from Alexander Aring. 10) The FEC driver's restart doesn't perform operations in the correct order, so promiscuous settings can get lost. Fix from Stefan Wahren. 11) Fix SKB leak in SCTP cookie handling, from Daniel Borkmann. 12) Reference count and memory leak fixes in TIPC from Ying Xue and Erik Hugne. 13) Forced eviction in inet_frag_evictor() must strictly make sure all frags are deleted, otherwise module unload (f.e. 6lowpan) can crash. Fix from Florian Westphal. 14) Remove assumptions in AF_UNIX's use of csum_partial() (which it uses as a hash function), which breaks on PowerPC. From Anton Blanchard. The main gist of the issue is that csum_partial() is defined only as a value that, once folded (f.e. via csum_fold()) produces a correct 16-bit checksum. It is legitimate, therefore, for csum_partial() to produce two different 32-bit values over the same data if their respective alignments are different. 15) Fix endiannes bug in MAC address handling of ibmveth driver, also from Anton Blanchard. 16) Error checks for ipv6 exthdrs offload registration are reversed, from Anton Nayshtut. 17) Externally triggered ipv6 addrconf routes should count against the garbage collection threshold. Fix from Sabrina Dubroca. 18) The PCI shutdown handler added to the bnx2 driver can wedge the chip if it was not brought up earlier already, which in particular causes the firmware to shut down the PHY. Fix from Michael Chan. 19) Adjust the sanity WARN_ON_ONCE() in qdisc_list_add() because as currently coded it can and does trigger in legitimate situations. From Eric Dumazet. 20) BNA driver fails to build on ARM because of a too large udelay() call, fix from Ben Hutchings. 21) Fair-Queue qdisc holds locks during GFP_KERNEL allocations, fix from Eric Dumazet. 22) The vlan passthrough ops added in the previous release causes a regression in source MAC address setting of outgoing headers in some circumstances. Fix from Peter Boström" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (70 commits) ipv6: Avoid unnecessary temporary addresses being generated eth: fec: Fix lost promiscuous mode after reconnecting cable bonding: set correct vlan id for alb xmit path at86rf230: fix lockdep splats net/mlx4_en: Deregister multicast vxlan steering rules when going down vmxnet3: fix building without CONFIG_PCI_MSI MAINTAINERS: add networking selftests to NETWORKING net: socket: error on a negative msg_namelen MAINTAINERS: Add tools/net to NETWORKING [GENERAL] packet: doc: Spelling s/than/that/ net/mlx4_core: Load the IB driver when the device supports IBoE net/mlx4_en: Handle vxlan steering rules for mac address changes net/mlx4_core: Fix wrong dump of the vxlan offloads device capability xen-netback: use skb_is_gso in xenvif_start_xmit r8169: fix the incorrect tx descriptor version tools/net/Makefile: Define PACKAGE to fix build problems x86: bpf_jit: support negative offsets bridge: multicast: enable snooping on general queries only bridge: multicast: add sanity check for general query destination tcp: tcp_release_cb() should release socket ownership ... 14 March 2014, 03:38:36 UTC
62c19c9 i2c: Remove usage of orphaned symbol OF_I2C The symbol is an orphan, don't depend on it anymore. Signed-off-by: Richard Weinberger <richard@nod.at> [wsa: enhanced commit message] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Fixes: 687b81d083c0 (i2c: move OF helpers into the core) Cc: stable@kernel.org 13 March 2014, 21:33:44 UTC
d5af40d Merge branches 'pnp', 'acpi-init', 'acpi-sleep' and 'pm-cpufreq' * pnp: PNP / ACPI: proper handling of ACPI IO/Memory resource parsing failures * acpi-init: ACPI / init: Invoke early ACPI initialization later * acpi-sleep: ACPI / sleep: Add extra checks for HW Reduced ACPI mode sleep states * pm-cpufreq: cpufreq: Skip current frequency initialization for ->setpolicy drivers 13 March 2014, 21:12:30 UTC
a4e90be ACPI / sleep: Add extra checks for HW Reduced ACPI mode sleep states If the HW Reduced ACPI mode bit is set in the FADT, ACPICA uses the optional sleep control and sleep status registers for making the system enter sleep states (including S5), so it is not possible to use system sleep states or power it off using ACPI if the HW Reduced ACPI mode bit is set and those registers are not available. For this reason, add a new function, acpi_sleep_state_supported(), checking if the HW Reduced ACPI mode bit is set and whether or not system sleep states are usable in that case in addition to checking the return value of acpi_get_sleep_type_data() and make the ACPI sleep setup routines use that function to check the availability of system sleep states. Among other things, this prevents the kernel from attempting to use ACPI for powering off HW Reduced ACPI systems without the sleep control and sleep status registers, because ACPI power off doesn't have a chance to work on them. That allows alternative power off mechanisms that may actually work to be used on those systems. The affected machines include Dell Venue 8 Pro, Asus T100TA, Haswell Desktop SDP and Ivy Bridge EP Demo depot. References: https://bugzilla.kernel.org/show_bug.cgi?id=70931 Reported-by: Adam Williamson <awilliam@redhat.com> Tested-by: Aubrey Li <aubrey.li@linux.intel.com> Cc: 3.4+ <stable@vger.kernel.org> # 3.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 13 March 2014, 21:11:39 UTC
ecab670 ipv6: Avoid unnecessary temporary addresses being generated tmp_prefered_lft is an offset to ifp->tstamp, not now. Therefore age needs to be added to the condition. Age calculation in ipv6_create_tempaddr is different from the one in addrconf_verify and doesn't consider ADDRCONF_TIMER_FUZZ_MINUS. This can cause age in ipv6_create_tempaddr to be less than the one in addrconf_verify and therefore unnecessary temporary address to be generated. Use age calculation as in addrconf_modify to avoid this. Signed-off-by: Heiner Kallweit <heiner.kallweit@web.de> Signed-off-by: David S. Miller <davem@davemloft.net> 13 March 2014, 19:49:14 UTC
84fe618 eth: fec: Fix lost promiscuous mode after reconnecting cable If the Freescale fec is in promiscuous mode and network cable is reconnected then the promiscuous mode get lost. The problem is caused by a too soon call of set_multicast_list to re-enable promisc mode. The FEC_R_CNTRL register changes are overwritten by fec_restart. This patch fixes this by moving the call behind the init of FEC_R_CNTRL register in fec_restart. Successful tested on a i.MX28 board. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 March 2014, 19:46:20 UTC
fb00bc2 bonding: set correct vlan id for alb xmit path The commit d3ab3ffd1d728d7ee77340e7e7e2c7cfe6a4013e (bonding: use rlb_client_info->vlan_id instead of ->tag) remove the rlb_client_info->tag, but occur some issues, The vlan_get_tag() will return 0 for success and -EINVAL for error, so the client_info->vlan_id always be set to 0 if the vlan_get_tag return 0 for success, so the client_info would never get a correct vlan id. We should only set the vlan id to 0 when the vlan_get_tag return error. Fixes: d3ab3ffd1d7 (bonding: use rlb_client_info->vlan_id instead of ->tag) CC: Ding Tianhong <dingtianhong@huawei.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 March 2014, 19:45:10 UTC
6e07a1e at86rf230: fix lockdep splats This patch fix a lockdep in the at86rf230 driver, otherwise we get: [ 30.206517] ================================= [ 30.211078] [ INFO: inconsistent lock state ] [ 30.215647] 3.14.0-20140108-1-00994-g32e9426 #163 Not tainted [ 30.221660] --------------------------------- [ 30.226222] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [ 30.232514] systemd-udevd/157 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 30.238439] (&(&lp->lock)->rlock){?.+...}, at: [<c03600f8>] at86rf230_isr+0x18/0x44 [ 30.246621] {HARDIRQ-ON-W} state was registered at: [ 30.251728] [<c0061ce4>] __lock_acquire+0x7a4/0x18d8 [ 30.257135] [<c0063500>] lock_acquire+0x68/0x7c [ 30.262071] [<c0588820>] _raw_spin_lock+0x28/0x38 [ 30.267203] [<c0361240>] at86rf230_xmit+0x1c/0x144 [ 30.272412] [<c057ba6c>] mac802154_xmit_worker+0x88/0x148 [ 30.278271] [<c0047844>] process_one_work+0x274/0x404 [ 30.283761] [<c00484c0>] worker_thread+0x228/0x374 [ 30.288971] [<c004cfb8>] kthread+0xd0/0xe4 [ 30.293455] [<c000dac8>] ret_from_fork+0x14/0x2c [ 30.298493] irq event stamp: 8948 [ 30.301963] hardirqs last enabled at (8947): [<c00cb290>] __kmalloc+0xb4/0x110 [ 30.309636] hardirqs last disabled at (8948): [<c00115d4>] __irq_svc+0x34/0x5c [ 30.317215] softirqs last enabled at (8452): [<c0037324>] __do_softirq+0x1dc/0x264 [ 30.325243] softirqs last disabled at (8439): [<c0037638>] irq_exit+0x80/0xf4 We use the lp->lock inside the isr of at86rf230, that's why we need the irqsave spinlock calls. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 March 2014, 19:44:24 UTC
5842219 Revert "rt2x00: rt2800lib: Update BBP register initialization for RT53xx" This reverts commit eac40d9631a7db43570df859fa8a9922e9623607. It cause random connection drops on RT5390 PCI adapters. On Mediatek there is different driver version available for RT53xx chip based on bus type (2.5.0.3 for PCI and 2.6.1.3 for USB). Hence possibly we should set registers differently based on bus type. But is also possible that new driver (i.e. 2.6.1.3) was not verified on RT53xx USB. Until we figure out how to initialize registers properly for RT53xx just revert commit eac40d9631a7db43570df859fa8a9922e9623607 since it cause regression. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 13 March 2014, 18:57:27 UTC
5998be8 ath9k: Fix sequence number assignment for non-data frames Since commit 558ff225de80ac95b132d3a115ddadcd64498b4f (ath9k: fix ps-poll responses under a-mpdu sessions) non-data frames would have gotten a sequence number from a TIDs sequence counter instead of using the global sequence counter. This can lead to instable connections. To fix this only select the correct TID if we are processing a data frame. Furthermore, prevent non-data frames to get a sequence number from a TID sequence counter by adding a check to ath_tx_setup_buffer. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> 13 March 2014, 18:57:26 UTC
105ff41 ath9k_hw: fix unreachable code in baseband hang detection code The commit "ath9k: reduce baseband hang detection false positive rate" added a delay in the loop checking the baseband state, however it was unreachable due to previous 'continue' statements. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> 13 March 2014, 18:57:26 UTC
2dc3a8e brcmfmac: fix skb leak in brcmf_sdio_txpkt_prep_sg error path. Commit 1eb4301867 (brcmfmac: fix txglomming scatter-gather packet transfers) added an allocation of an skb via brcmu_pkt_buf_get_skb() but forgot to free it on one of the error paths. Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Dave Jones<davej@fedoraproject.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> 13 March 2014, 18:57:26 UTC
de12326 net/mlx4_en: Deregister multicast vxlan steering rules when going down When mlx4_en_stop_port() is called, we need to deregister also the tunnel steering rules that relate to multicast. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 March 2014, 17:35:40 UTC
0a8d8c4 vmxnet3: fix building without CONFIG_PCI_MSI Since commit d25f06ea466e "vmxnet3: fix netpoll race condition", the vmxnet3 driver fails to build when CONFIG_PCI_MSI is disabled, because it unconditionally references the vmxnet3_msix_rx() function. To fix this, use the same #ifdef in the caller that exists around the function definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: stable@vger.kernel.org Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 March 2014, 16:56:38 UTC
f4e53f9 MAINTAINERS: add networking selftests to NETWORKING Add it to NETWORKING [GENERAL] to make sure patches for selftests go to the netdev list as well. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 13 March 2014, 16:54:29 UTC
e724f08 KVM: PPC: Book3S HV: Fix register usage when loading/saving VRSAVE Commit 595e4f7e697e ("KVM: PPC: Book3S HV: Use load/store_fp_state functions in HV guest entry/exit") changed the register usage in kvmppc_save_fp() and kvmppc_load_fp() but omitted changing the instructions that load and save VRSAVE. The result is that the VRSAVE value was loaded from a constant address, and saved to a location past the end of the vcpu struct, causing host kernel memory corruption and various kinds of host kernel crashes. This fixes the problem by using register r31, which contains the vcpu pointer, instead of r3 and r4. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 13 March 2014, 09:47:01 UTC
a5b0ccb KVM: PPC: Book3S HV: Remove bogus duplicate code Commit 7b490411c37f ("KVM: PPC: Book3S HV: Add new state for transactional memory") incorrectly added some duplicate code to the guest exit path because I didn't manage to clean up after a rebase correctly. This removes the extraneous material. The presence of this extraneous code causes host crashes whenever a guest is run. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 13 March 2014, 09:46:52 UTC
f042cc4 Merge tag 'ttm-fixes-3.14-2014-03-12' of git://people.freedesktop.org/~thomash/linux into drm-fixes Second pull request of 2014-03-12. The first one was requested to be canceled. Rob's fix for oops on invalidate_caches() and a fix for a performance regression. * tag 'ttm-fixes-3.14-2014-03-12' of git://people.freedesktop.org/~thomash/linux: drm/ttm: don't oops if no invalidate_caches() drm/ttm: Work around performance regression with VM_PFNMAP 13 March 2014, 07:31:24 UTC
bf21d60 Merge branch 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux into drm-fixes A few more radeon fixes. * 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/cik: properly set compute ring status on disable drm/radeon/cik: stop the sdma engines in the enable() function drm/radeon/cik: properly set sdma ring status on disable drm/radeon: fix runpm disabling on non-PX harder 13 March 2014, 07:31:01 UTC
7aa4a06 Merge tag 'vmwgfx-fixes-3.14-2014-03-13' of git://people.freedesktop.org/~thomash/linux into drm-fixes Pull request of 2014-03-13 one minor fix for new hw * tag 'vmwgfx-fixes-3.14-2014-03-13' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix a surface reference corner-case in legacy emulation mode 13 March 2014, 07:30:31 UTC
4b0c825 drm/vmwgfx: Fix a surface reference corner-case in legacy emulation mode If running on a gb-object capable device with a non-gb capable surface exporter (X server) and a gb capable surface referencing client (GL driver), the referencing client expects to find a shareable backing buffer attached to the surface at reference time. This may not be the case if the surface has not yet been validated. This would cause the surface reference IOCTL to return an error. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> 13 March 2014, 06:51:32 UTC
ac9dc67 Merge tag 'pci-v3.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are two important regression fixes for bugs we've introduced so far in v3.14. One of the resource allocation changes from the merge window is broken for 32-bit kernels where we don't use _CRS for PCI host bridges (mostly pre-2008 machines), so there's a fix for that. The INTx enable change we put in after the merge window turned out to break pciehp because we re-enable INTx on the hotplug bridge, which apparently breaks MSI for future hotplug events" * tag 'pci-v3.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Don't check resource_size() in pci_bus_alloc_resource() PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled 13 March 2014, 01:29:34 UTC
18f2af2 Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Paolo Bonzini: "The ARM patch fixes a build breakage with randconfig. The x86 one fixes Windows guests on AMD processors" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: fix cr8 intercept window ARM: KVM: fix non-VGIC compilation 13 March 2014, 00:27:23 UTC
c4e1acb ACPI / init: Invoke early ACPI initialization later Commit 73f7d1ca3263 (ACPI / init: Run acpi_early_init() before timekeeping_init()) optimistically moved the early ACPI initialization before timekeeping_init(), but that didn't work, because it broke fast TSC calibration for Julian Wollrath on Thinkpad x121e (and most likely for others too). The reason is that acpi_early_init() enables the SCI and that interferes with the fast TSC calibration mechanism. Thus follow the original idea to execute acpi_early_init() before efi_enter_virtual_mode() to help the EFI people for now and we can revisit the other problem that commit 73f7d1ca3263 attempted to address in the future (if really necessary). Fixes: 73f7d1ca3263 (ACPI / init: Run acpi_early_init() before timekeeping_init()) Reported-by: Julian Wollrath <jwollrath@web.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 12 March 2014, 23:53:51 UTC
2ed99e3 cpufreq: Skip current frequency initialization for ->setpolicy drivers After commit da60ce9f2fac (cpufreq: call cpufreq_driver->get() after calling ->init()) __cpufreq_add_dev() sometimes fails for CPUs handled by intel_pstate, because that driver may return 0 from its ->get() callback if it has not run long enough to collect enough samples on the given CPU. That didn't happen before commit da60ce9f2fac which added policy->cur initialization to __cpufreq_add_dev() to help reduce code duplication in other cpufreq drivers. However, the code added by commit da60ce9f2fac need not be executed for cpufreq drivers having the ->setpolicy callback defined, because the subsequent invocation of cpufreq_set_policy() will use that callback to initialize the policy anyway and it doesn't need policy->cur to be initialized upfront. The analogous code in cpufreq_update_policy() is also unnecessary for cpufreq drivers having ->setpolicy set and may be skipped for them as well. Since intel_pstate provides ->setpolicy, skipping the upfront policy->cur initialization for cpufreq drivers with that callback set will cover intel_pstate and the problem it's been having after commit da60ce9f2fac will be addressed. Fixes: da60ce9f2fac (cpufreq: call cpufreq_driver->get() after calling ->init()) References: https://bugzilla.kernel.org/show_bug.cgi?id=71931 Reported-and-tested-by: Patrik Lundquist <patrik.lundquist@gmail.com> Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Cc: 3.13+ <stable@vger.kernel.org> # 3.13+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 12 March 2014, 23:37:16 UTC
2f727f5 Merge tag 'sound-3.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few fixes for ASoC (N810 DT init fix, DPCM error path fix and a couple of MFD init fixes), and a fix for a Lenovo laptop. All small and trivial fixes, suitable for rc7" * tag 'sound-3.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: 88pm860: Fix IO setup ASoC: si476x: Fix IO setup ALSA: hda - Fix loud click noise with IdeaPad 410Y ASoC: pcm: free path list before exiting from error conditions ASoC: n810: fix init with DT boot 12 March 2014, 22:36:04 UTC
dbb490b net: socket: error on a negative msg_namelen When copying in a struct msghdr from the user, if the user has set the msg_namelen parameter to a negative value it gets clamped to a valid size due to a comparison between signed and unsigned values. Ensure the syscall errors when the user passes in a negative value. Signed-off-by: Matthew Leach <matthew.leach@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 March 2014, 20:29:24 UTC
back to top