Skip to main content

Browse the archive

https://github.com/torvalds/linux
27 March 2024, 02:37:15 UTC
sort by:
Revision Author Date Message Commit Date
5fa77b5 Linus Torvalds 13 July 2014, 19:09:18 UTC Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: "Another round of fixes for ARM: - a set of kprobes fixes from Jon Medhurst - fix the revision checking for the L2 cache which wasn't noticed to have been broken" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: l2c: fix revision checking ARM: kprobes: Fix test code compilation errors for ARMv4 targets ARM: kprobes: Disallow instructions with PC and register specified shift ARM: kprobes: Prevent known test failures stopping other tests running 13 July 2014, 19:09:18 UTC
33fe3ae Linus Torvalds 13 July 2014, 19:04:06 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fixes from Geert Uytterhoeven: "Summary: - Fix for a boot regression introduced in v3.16-rc1, - Fix for a build issue in -next" Christoph Hellwig questioned why mach_random_get_entropy should be exported to modules, and Geert explains that random_get_entropy() is called by at least the crypto layer and ends up using it on m68k. On most other architectures it just uses get_cycles() (which is typically inlined and doesn't need exporting), * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Export mach_random_get_entropy to modules m68k: Fix boot regression on machines with RAM at non-zero 13 July 2014, 19:04:06 UTC
54f8c2a Linus Torvalds 13 July 2014, 19:02:05 UTC Merge branch 'parisc-3.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "The major patch in here is one which fixes the fanotify_mark() syscall in the compat layer of the 64bit parisc kernel. It went unnoticed so long, because the calling syntax when using a 64bit parameter in a 32bit syscall is quite complex and even worse, it may be even different if you call syscall() or the glibc wrapper. This patch makes the kernel accept the calling convention when called by the glibc wrapper. The other two patches are trivial and remove unused headers, #includes and adds the serial ports of the fastest C8000 workstation to the parisc-kernel internal hardware database" * 'parisc-3.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: drop unused defines and header includes parisc: fix fanotify_mark() syscall on 32bit compat kernel parisc: add serial ports of C8000/1GHz machine to hardware database 13 July 2014, 19:02:05 UTC
fe22ddc Helge Deller 10 July 2014, 16:08:11 UTC parisc: drop unused defines and header includes Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 3.13+ 13 July 2014, 13:56:12 UTC
ab8a261 Helge Deller 10 July 2014, 16:07:17 UTC parisc: fix fanotify_mark() syscall on 32bit compat kernel On parisc we can not use the existing compat implementation for fanotify_mark() because for the 64bit mask parameter the higher and lower 32bits are ordered differently than what the compat function expects from big endian architectures. Specifically: It finally turned out, that on hppa we end up with different assignments of parameters to kernel arguments depending on if we call the glibc wrapper function int fanotify_mark (int __fanotify_fd, unsigned int __flags, uint64_t __mask, int __dfd, const char *__pathname); or directly calling the syscall manually syscall(__NR_fanotify_mark, ...) Reason is, that the syscall() function is implemented as C-function and because we now have the sysno as first parameter in front of the other parameters the compiler will unexpectedly add an empty paramenter in front of the u64 value to ensure the correct calling alignment for 64bit values. This means, on hppa you can't simply use syscall() to call the kernel fanotify_mark() function directly, but you have to use the glibc function instead. This patch fixes the kernel in the hppa-arch specifc coding to adjust the parameters in a way as if userspace calls the glibc wrapper function fanotify_mark(). Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 3.13+ 13 July 2014, 13:55:04 UTC
eadcc72 Helge Deller 28 June 2014, 15:44:51 UTC parisc: add serial ports of C8000/1GHz machine to hardware database Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 3.13+ 13 July 2014, 13:51:58 UTC
28b1fae Linus Torvalds 13 July 2014, 05:24:50 UTC Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma Pull slave-dmaengine fixes from Vinod Koul: "We have two small fixes. First one from Daniel to handle 0-length packets for usb cppi dma. Second by Russell for imx-sdam cyclic residue reporting" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: Update imx-sdma cyclic handling to report residue dma: cppi41: handle 0-length packets 13 July 2014, 05:24:50 UTC
6b458ac Linus Torvalds 12 July 2014, 21:13:10 UTC Merge tag 'usb-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes, PHY driver fixes (they ended up in this tree for lack of somewhere else to put them), and some new USB device ids" * tag 'usb-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove phy: core: Fix error path in phy_create() drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLE phy: omap-usb2: fix devm_ioremap_resource error detection code phy: sun4i: depend on RESET_CONTROLLER USB: serial: ftdi_sio: Add Infineon Triboard USB: ftdi_sio: Add extra PID. usb: option: Add ID for Telewell TW-LTE 4G v2 USB: cp210x: add support for Corsair usb dongle 12 July 2014, 21:13:10 UTC
78b3d1c Linus Torvalds 12 July 2014, 21:12:35 UTC Merge tag 'tty-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small serial fixes that resolve some reported problems that started in 3.15 with some serial drivers. And there's a new dt binding for a serial driver, which was all that was needed for the renesas serial driver" * tag 'tty-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: sh-sci: Add device tree support for r8a7{778,740,3a4} and sh73a0 serial: imx: Fix build breakage serial: arc_uart: Use uart_circ_empty() for open-coded comparison serial: Test for no tx data on tx restart 12 July 2014, 21:12:35 UTC
56a50f2 Linus Torvalds 12 July 2014, 21:12:04 UTC Merge tag 'char-misc-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are two hyperv driver fixes, and one i8k driver fix for 3.16" * tag 'char-misc-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: i8k: Fix non-SMP operation Drivers: hv: util: Fix a bug in the KVP code Drivers: hv: vmbus: Fix a bug in the channel callback dispatch code 12 July 2014, 21:12:04 UTC
303f8ad Linus Torvalds 12 July 2014, 21:11:09 UTC Merge tag 'staging-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull IIO fixes from Greg KH: "Here are some IIO driver fixes for 3.16-rc5. Nothing major, just resolves some minor issues that have been reported" * tag 'staging-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: ti_am335x_adc: Fix: Use same step id at FIFOs both ends iio:tcs3472: Check for buffer enabled and locking iio: hid-sensor-prox: Fix return values iio: hid-sensor-gyro-3d: Fix return values iio: hid-sensor-als: Fix return values iio: hid-sensor-magn-3d: Fix return values iio: hid-sensor-accel-3d: Fix return values iio: hid-sensor-press: Fix return values 12 July 2014, 21:11:09 UTC
3a57cc5 Pali Rohár 12 July 2014, 16:56:22 UTC Documenation/laptops: rename and update hpfall.c Dell kernel driver dell-smo8800 provides same freefall interface as hp_accel so program hpfall.c works also on Dell laptops. So rename it to freefall.c. Dell driver does not provide hp::hddprotect led so make sure that freefall.c works also if hp::hddprotect does not exist in sysfs. Additionally write info to syslog. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Cc: Sonal Santan <sonal.santan@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 July 2014, 18:30:37 UTC
0ba4f6e Masanari Iida 12 July 2014, 16:55:28 UTC DocBook: fix various typos This patch fixed spelling typo in various template files within Documentation/Docbook. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 July 2014, 18:30:36 UTC
8011b3c Masanari Iida 12 July 2014, 16:55:15 UTC DocBook: fix mtdnand typos This patch fixed spelling typo found in DocBook/mtdnand.tmpl. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 July 2014, 18:30:36 UTC
cbb4d3e Horia Geanta 12 July 2014, 16:55:03 UTC scripts/kernel-doc: handle object-like macros Object-like macros are different than function-like macros: https://gcc.gnu.org/onlinedocs/cpp/Object-like-Macros.html https://gcc.gnu.org/onlinedocs/cpp/Function-like-Macros.html They are not parsed correctly, generating invalid intermediate files (xmls) for cases like: #define BIT_MASK (0xFF << BIT_SHIFT) where "OxFF <<" is considered to be parameter type. When parsing, we can differentiate beween these two types of macros by checking whether there is at least one whitespace b/w "#define" and first opening parenthesis. Signed-off-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 July 2014, 18:30:36 UTC
c8c3f7d Paul Bolle 12 July 2014, 16:54:52 UTC Documentation/Changes: clean up mcelog paragraph The paragraph on mcelog currently describes kernel v2.6.31. In that kernel the mce code (for i386, that is) was in transition. Ever since v2.6.32 the situation is much simpler (eg, mcelog is now needed to process events on almost all x86 machines, i386 and x86-64). Since this "document is designed to provide a list of the minimum levels of software necessary to run the 3.0 kernels" let's just describe that situation. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 12 July 2014, 18:30:36 UTC
cda390b Russell King 12 July 2014, 12:59:24 UTC Merge branch 'kprobes-test-fixes' of git://git.linaro.org/people/tixy/kernel into fixes 12 July 2014, 12:59:24 UTC
eb82a3d Roger Quadros 10 July 2014, 06:25:03 UTC phy: omap-usb2: Balance pm_runtime_enable() on probe failure and remove If probe fails then we need to call pm_runtime_disable() to balance out the previous pm_runtime_enable() call. Else it will cause unbalanced pm_runtime_enable() call in the succeding probe call. This anomaly was observed when the call to devm_phy_create() failed with -EPROBE_DEFER. Balance out the pm_runtime_enable() call in .remove() as well. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 12 July 2014, 01:23:50 UTC
e73b49f Roger Quadros 10 July 2014, 06:25:02 UTC phy: core: Fix error path in phy_create() Prevent resources from being freed twice in case device_add() call fails within phy_create(). Also use ida_simple_remove() instead of ida_remove() as we had used ida_simple_get() to allocate the ida. Cc: 3.13+ <stable@vger.kernel.org> # 3.13+ Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 12 July 2014, 01:23:49 UTC
bf5baf9 Sjoerd Simons 10 July 2014, 06:25:01 UTC drivers: phy: phy-samsung-usb2.c: Add missing MODULE_DEVICE_TABLE Allow phy-exynos-usb2 to be autoloaded based on devicetree information. Tested on Odroid X2 with its USB subsystem build as modules. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 12 July 2014, 01:23:49 UTC
3df9fcd Himangi Saraogi 10 July 2014, 06:25:00 UTC phy: omap-usb2: fix devm_ioremap_resource error detection code devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure. A simplified version of the semantic match that finds this problem is as follows: // <smpl> @@ expression e,e1; statement S; @@ *e = devm_ioremap_resource(...); if (!e1) S // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 12 July 2014, 01:23:49 UTC
9820ccb Maxime Ripard 10 July 2014, 06:24:59 UTC phy: sun4i: depend on RESET_CONTROLLER The driver depend on the reset framework in a mandatory way. Make sure reset_control_get is defined by adding this dependency in Kconfig Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 12 July 2014, 01:23:49 UTC
d8279a4 Michal Sojka 10 July 2014, 12:00:34 UTC USB: serial: ftdi_sio: Add Infineon Triboard This adds support for Infineon TriBoard TC1798 [1]. Only interface 1 is used as serial line (see [2], Figure 8-6). [1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268 [2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426a Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 12 July 2014, 01:22:38 UTC
34c4eda Simon Horman 11 July 2014, 09:11:08 UTC serial: sh-sci: Add device tree support for r8a7{778,740,3a4} and sh73a0 Simply document new compat strings. There appears to be no need for a driver updates. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 12 July 2014, 00:45:12 UTC
8bec751 Peter Hurley 11 July 2014, 02:36:46 UTC serial: imx: Fix build breakage Fix breakage introduced by commit c557d392fbf5badd693ea1946a4317c87a26a716, 'serial: Test for no tx data on tx restart'. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 12 July 2014, 00:43:13 UTC
47ea8dd Linus Torvalds 12 July 2014, 00:10:05 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "A couple of further build fixes for the VDSO code. This is turning into a bit of a headache, and Andy has already come up with a more ultimate cleanup, but most likely that is 3.17 material" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-32, vdso: Fix vDSO build error due to missing align_vdso_addr() x86-64, vdso: Fix vDSO build breakage due to empty .rela.dyn 12 July 2014, 00:10:05 UTC
bae78dc Linus Torvalds 11 July 2014, 22:10:04 UTC Merge branch 'for-3.16' of git://linux-nfs.org/~bfields/linux Pull nfsd bugfix from Bruce Fields: "Another xdr encoding regression that may cause incorrect encoding on failures of certain readdirs" * 'for-3.16' of git://linux-nfs.org/~bfields/linux: nfsd: Fix bad reserving space for encoding rdattr_error 11 July 2014, 22:10:04 UTC
ef24209 Linus Torvalds 11 July 2014, 22:09:15 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "ARM64 implementation of TASK_SIZE_OF and exporting two functions to modules" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: implement TASK_SIZE_OF arm64: export __cpu_{clear,copy}_user_page functions 11 July 2014, 22:09:15 UTC
67b9d76 Linus Torvalds 11 July 2014, 16:33:36 UTC Merge tag 'dm-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM multipath IO hang regression from 3.15 due to logic bug in multipath_busy. This impacted cable-pull testing and also the ability to boot with IPR SCSI on a POWER8 box. - Fix possible deadlock with deferred device removal by using a new dedicated workqueue rather than using the system workqueue. - Fix NULL pointer crash due to race condition in dm-io's wake up code for sync_io by using a completion. - Update dm-crypt and dm-zero author name following legal name change; this is important to Jana so I didn't see any reason to hold it back. * tag 'dm-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm mpath: fix IO hang due to logic bug in multipath_busy dm io: fix a race condition in the wake up code for sync_io dm crypt, dm zero: update author name following legal name change dm: allocate a special workqueue for deferred device removal 11 July 2014, 16:33:36 UTC
c7c3ae2 Linus Torvalds 11 July 2014, 16:32:39 UTC Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "Here are a few more powerpc fixes for 3.16 There's a small series of 3 patches that fix saving/restoring MMUCR2 when using KVM without which perf goes completely bonkers in the host system. Another perf fix from Anton that's been rotting away in patchwork due to my poor eyesight, a couple of compile fixes, a little addition to the WSP removal by Michael (removing a bit more dead stuff) and a fix for an embarassing regression with our soft irq masking" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/perf: Never program book3s PMCs with values >= 0x80000000 powerpc: Disable RELOCATABLE for COMPILE_TEST with PPC64 powerpc/perf: Clear MMCR2 when enabling PMU powerpc/perf: Add PPMU_ARCH_207S define powerpc/kvm: Remove redundant save of SIER AND MMCR2 powerpc/powernv: Check for IRQHAPPENED before sleeping powerpc: Clean up MMU_FTRS_A2 and MMU_FTR_TYPE_3E powerpc/cell: Fix compilation with CONFIG_COREDUMP=n 11 July 2014, 16:32:39 UTC
5bc8c7c Geert Uytterhoeven 10 July 2014, 16:03:17 UTC m68k: Export mach_random_get_entropy to modules When a module calls random_get_entropy(): ERROR: "mach_random_get_entropy" [crypto/drbg.ko] undefined! make[1]: *** [__modpost] Error 1 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> 11 July 2014, 08:37:53 UTC
f560294 Anton Blanchard 28 May 2014, 22:15:38 UTC powerpc/perf: Never program book3s PMCs with values >= 0x80000000 We are seeing a lot of PMU warnings on POWER8: Can't find PMC that caused IRQ Looking closer, the active PMC is 0 at this point and we took a PMU exception on the transition from negative to 0. Some versions of POWER8 have an issue where they edge detect and not level detect PMC overflows. A number of places program the PMC with (0x80000000 - period_left), where period_left can be negative. We can either fix all of these or just ensure that period_left is always >= 1. This patch takes the second option. Cc: <stable@vger.kernel.org> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 11 July 2014, 03:50:47 UTC
85d90fa Linus Torvalds 11 July 2014, 03:37:33 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Nothing too scary, we have one outstanding i915 regression but Daniel has promised the fix as soon as he's finished testing it a bit. Fixes for the main x86 drivers: - radeon: dpm fixes, displayport regression fix - i915: quirks for backlight regression, edp reboot fix, valleyview black screen fixes - nouveau: display port regression fixes, fix for memory reclocking" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/dpm: Reenabling SS on Cayman drm/radeon: fix typo in ci_stop_dpm() drm/radeon: fix typo in golden register setup on evergreen drm/radeon: only print meaningful VM faults drm/radeon/dp: return -EIO for flags not zero case drm/i915/vlv: T12 eDP panel timing enforcement during reboot drm/i915: Only unbind vgacon, not other console drivers drm/i915: Don't clobber the GTT when it's within stolen memory drm/i915/vlv: Update the DSI ULPS entry/exit sequence drm/i915/vlv: DPI FIFO empty check is not needed drm/i915: Toshiba CB35 has a controllable backlight drm/i915: Acer C720 and C720P have controllable backlights drm/i915: quirk asserts controllable backlight presence, overriding VBT drm/nouveau/ram: fix test for gpio presence drm/nouveau/dp: workaround broken display drm/nouveau/dp: fix required link bandwidth calculations drm/nouveau/kms: restore fbcon after display has been resumed drm/nv50-/kms: pass a non-zero value for head to sor dpms methods drm/nouveau/fb: Prevent inlining of ramfuc_reg drm/gk104/ram: bash mpll bit 31 on 11 July 2014, 03:37:33 UTC
fb43e84 Guenter Roeck 30 June 2014, 18:45:30 UTC powerpc: Disable RELOCATABLE for COMPILE_TEST with PPC64 powerpc:allmodconfig has been failing for some time with the following error. arch/powerpc/kernel/exceptions-64s.S: Assembler messages: arch/powerpc/kernel/exceptions-64s.S:1312: Error: attempt to move .org backwards make[1]: *** [arch/powerpc/kernel/head_64.o] Error 1 A number of attempts to fix the problem by moving around code have been unsuccessful and resulted in failed builds for some configurations and the discovery of toolchain bugs. Fix the problem by disabling RELOCATABLE for COMPILE_TEST builds instead. While this is less than perfect, it avoids substantial code changes which would otherwise be necessary just to make COMPILE_TEST builds happy and might have undesired side effects. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 11 July 2014, 02:55:09 UTC
b50a6c5 Joel Stanley 08 July 2014, 06:38:22 UTC powerpc/perf: Clear MMCR2 when enabling PMU On POWER8 when switching to a KVM guest we set bits in MMCR2 to freeze the PMU counters. Aside from on boot they are then never reset, resulting in stuck perf counters for any user in the guest or host. We now set MMCR2 to 0 whenever enabling the PMU, which provides a sane state for perf to use the PMU counters under either the guest or the host. This was manifesting as a bug with ppc64_cpu --frequency: $ sudo ppc64_cpu --frequency WARNING: couldn't run on cpu 0 WARNING: couldn't run on cpu 8 ... WARNING: couldn't run on cpu 144 WARNING: couldn't run on cpu 152 min: 18446744073.710 GHz (cpu -1) max: 0.000 GHz (cpu -1) avg: 0.000 GHz The command uses a perf counter to measure CPU cycles over a fixed amount of time, in order to approximate the frequency of the machine. The counters were returning zero once a guest was started, regardless of weather it was still running or had been shut down. By dumping the value of MMCR2, it was observed that once a guest is running MMCR2 is set to 1s - which stops counters from running: $ sudo sh -c 'echo p > /proc/sysrq-trigger' CPU: 0 PMU registers, ppmu = POWER8 n_counters = 6 PMC1: 5b635e38 PMC2: 00000000 PMC3: 00000000 PMC4: 00000000 PMC5: 1bf5a646 PMC6: 5793d378 PMC7: deadbeef PMC8: deadbeef MMCR0: 0000000080000000 MMCR1: 000000001e000000 MMCRA: 0000040000000000 MMCR2: fffffffffffffc00 EBBHR: 0000000000000000 EBBRR: 0000000000000000 BESCR: 0000000000000000 SIAR: 00000000000a51cc SDAR: c00000000fc40000 SIER: 0000000001000000 This is done unconditionally in book3s_hv_interrupts.S upon entering the guest, and the original value is only save/restored if the host has indicated it was using the PMU. This is okay, however the user of the PMU needs to ensure that it is in a defined state when it starts using it. Fixes: e05b9b9e5c10 ("powerpc/perf: Power8 PMU support") Cc: stable@vger.kernel.org Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 11 July 2014, 02:55:08 UTC
4d9690d Joel Stanley 08 July 2014, 06:38:21 UTC powerpc/perf: Add PPMU_ARCH_207S define Instead of separate bits for every POWER8 PMU feature, have a single one for v2.07 of the architecture. This saves us adding a MMCR2 define for a future patch. Cc: stable@vger.kernel.org Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 11 July 2014, 02:55:07 UTC
f73128f Joel Stanley 08 July 2014, 06:38:20 UTC powerpc/kvm: Remove redundant save of SIER AND MMCR2 These two registers are already saved in the block above. Aside from being unnecessary, by the time we get down to the second save location r8 no longer contains MMCR2, so we are clobbering the saved value with PMC5. MMCR2 primarily consists of counter freeze bits. So restoring the value of PMC5 into MMCR2 will most likely have the effect of freezing counters. Fixes: 72cde5a88d37 ("KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8") Cc: stable@vger.kernel.org Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 11 July 2014, 02:55:07 UTC
c733cf8 Preeti U Murthy 02 July 2014, 03:49:35 UTC powerpc/powernv: Check for IRQHAPPENED before sleeping Commit 8d6f7c5a: "powerpc/powernv: Make it possible to skip the IRQHAPPENED check in power7_nap()" added code that prevents cpus from checking for pending interrupts just before entering sleep state, which is wrong. These interrupts are delivered during the soft irq disabled state of the cpu. A cpu cannot enter any idle state with pending interrupts because they will never be serviced until the next time the cpu is woken up by some other interrupt. Its only then that the pending interrupts are replayed. This can result in device timeouts or warnings about this cpu being stuck. This patch fixes ths issue by ensuring that cpus check for pending interrupts just before entering any idle state as long as they are not in the path of split core operations. Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 11 July 2014, 02:55:06 UTC
cd68098 Michael Ellerman 08 July 2014, 07:10:45 UTC powerpc: Clean up MMU_FTRS_A2 and MMU_FTR_TYPE_3E In fb5a515704d7 "powerpc: Remove platforms/wsp and associated pieces", we removed the last user of MMU_FTRS_A2. So remove it. MMU_FTRS_A2 was the last user of MMU_FTR_TYPE_3E, so remove it also. This leaves some unreachable code in mmu_context_nohash.c, so remove that also. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 11 July 2014, 02:55:05 UTC
e623fbf Michael Ellerman 08 July 2014, 06:00:09 UTC powerpc/cell: Fix compilation with CONFIG_COREDUMP=n Commit 046d662f4818 "coredump: make core dump functionality optional" made the coredump optional, but didn't update the spufs code that depends on it. That leads to build errors such as: arch/powerpc/platforms/built-in.o: In function `.spufs_arch_write_note': coredump.c:(.text+0x22cd4): undefined reference to `.dump_emit' coredump.c:(.text+0x22cf4): undefined reference to `.dump_emit' coredump.c:(.text+0x22d0c): undefined reference to `.dump_align' coredump.c:(.text+0x22d48): undefined reference to `.dump_emit' coredump.c:(.text+0x22e7c): undefined reference to `.dump_skip' Fix it by adding some ifdefs in the cell code. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 11 July 2014, 02:55:05 UTC
fe5aa8a Linus Torvalds 11 July 2014, 01:40:47 UTC Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fixes from Michal Marek: "Three more fixes for the relative build dir feature: - Shut up make -s again - Fix for rpm/deb/tar-pkg with O=<subdir> - Fix for CONFIG_EXTRA_FIRMWARE" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: firmware: Create directories for external firmware kbuild: Fix packaging targets with relative $(srctree) kbuild: Do not print the build directory with make -s 11 July 2014, 01:40:47 UTC
b67db9d Linus Torvalds 11 July 2014, 01:36:30 UTC Merge tag 'pm+acpi-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These are a few regression fixes for ACPI device enumeration and resources management, intel_pstate and cpufreq, a revert of an ACPI commit removing user space interfaces in /proc that we incorrectly thought were not used any more, fixes for some long-standing concurrency issues in the ACPI EC driver, two ACPI battery driver fixes, stable-candidate fixes for intel_pstate, an ACPI-related fix for i915 and two new ACPI video blacklist entries for Win8-oriented BIOSes. Specifics: - Missing device ID for ACPI enumeration of PNP devices that we overlooked during the recent rework of that code from Zhang Rui. - Fix for a problem introduced during the 3.14 cycle in the ACPI device resources management code and causing it to reject all resources of length 0 although some of them are actually valid which affects serial ports detection on a number of systems. From Andy Whitcroft. - intel_pstate fix for a boot problem on some BayTrail-based systems introduced by a previous fix related to that platform during the 3.13 cycle from Dirk Brandewie. - Revert of a 3.13 commit that removed the ACPI AC /proc interface which turns out to be still needed by some old utilities (kpowersave from kde 3.5.10 in particular) from Lan Tianyu. - cpufreq build fix for the davinci ARM platform from Prabhakar Lad (the breakage was introduced during the 3.10 cycle). - ACPI-related i915 fix preventing firmware on some Thinkpad laptops from setting backlight levels incorrectly during AC plug/unplug. From Aaron Lu. - Fixes for two nasty race conditions in the ACPI embedded controller driver that may be responsible for a number of past bug reports related to the EC from Lv Zhang and a fix for two memory leaks in error code paths in that driver from Colin Ian King. - Fixes for a couple of corner-case issues in the intel_pstate driver (all candidates for -stable) from Dirk Brandewie and Vincent Minet. - Fixes for two corner-case issues in the ACPI battery driver from Josef Gajdusek and Lan Tianyu. - Two new ACPI video blacklist entries for Acer TravelMate B113 and Dell Inspiron 5737 from Edward Lin and Martin Kepplinger" * tag 'pm+acpi-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PNP: add soc_button_array device ID to PNP IDs list cpufreq: Makefile: fix compilation for davinci platform ACPI / video: Add Acer TravelMate B113 to native backlight blacklist ACPI / video: Add Dell Inspiron 5737 to the blacklist ACPI / i915: ignore firmware requests for backlight change ACPI / battery: fix wrong value of capacity_now reported when fully charged ACPI / resources: only reject zero length resources based at address zero ACPI / battery: Retry to get battery information if failed during probing ACPI / EC: Free saved_ec on error exit path ACPI / EC: Add detailed fields debugging support of EC_SC(R). ACPI / EC: Update revision due to recent changes ACPI / EC: Fix race condition in ec_transaction_completed() ACPI / EC: Remove duplicated ec_wait_ibf0() waiter ACPI / EC: Add asynchronous command byte write support ACPI / EC: Avoid race condition related to advance_transaction() intel_pstate: Set CPU number before accessing MSRs intel_pstate: Update documentation of {max,min}_perf_pct sysfs files intel_pstate: don't touch turbo bit if turbo disabled or unavailable. intel_pstate: Fix setting VID Revert "ACPI / AC: Remove AC's proc directory." 11 July 2014, 01:36:30 UTC
bf38b02 Dave Airlie 11 July 2014, 01:24:13 UTC Merge branch 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linux into drm-fixes This new request drops the pageflipping fixes for now. Just a few small fixes for dpm, DP, and a fix for a hang on boot evergreen. * 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/dpm: Reenabling SS on Cayman drm/radeon: fix typo in ci_stop_dpm() drm/radeon: fix typo in golden register setup on evergreen drm/radeon: only print meaningful VM faults drm/radeon/dp: return -EIO for flags not zero case 11 July 2014, 01:24:13 UTC
99ecb00 Peter Hurley 06 July 2014, 15:29:53 UTC serial: arc_uart: Use uart_circ_empty() for open-coded comparison Replace open-coded test for empty tx ring buffer with equivalent helper function, uart_circ_empty(). No functional change. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 10 July 2014, 23:31:34 UTC
c557d39 Peter Hurley 06 July 2014, 15:29:52 UTC serial: Test for no tx data on tx restart Commit 717f3bbab3c7628736ef738fdbf3d9a28578c26c, 'serial_core: Fix conditional start_tx on ring buffer not empty' exposes an incorrect assumption in several drivers' start_tx methods; the tx ring buffer can, in fact, be empty when restarting tx while performing flow control. Affected drivers: sunsab.c ip22zilog.c pmac_zilog.c sunzilog.c m32r_sio.c imx.c Other in-tree serial drivers either are not affected or already test for empty tx ring buffer before transmitting. Test for empty tx ring buffer in start_tx() method, after transmitting x_char (if applicable). Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Seth Bollinger <sethb@digi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Cc: stable <stable@vger.kernel.org> # 3.15 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 10 July 2014, 23:31:34 UTC
d093601 Jan Beulich 03 July 2014, 14:35:07 UTC x86-32, vdso: Fix vDSO build error due to missing align_vdso_addr() Relying on static functions used just once to get inlined (and subsequently have dead code paths eliminated) is wrong: Compilers are free to decide whether they do this, regardless of optimization level. With this not happening for vdso_addr() (observed with gcc 4.1.x), an unresolved reference to align_vdso_addr() causes the build to fail. [ hpa: vdso_addr() is never actually used on x86-32, as calculate_addr in map_vdso() is always false. It ought to be possible to clean this up further, but this fixes the immediate problem. ] Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/53B5863B02000078000204D5@mail.emea.novell.com Acked-by: Andy Lutomirski <luto@amacapital.net> Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> 10 July 2014, 23:06:04 UTC
9f88b90 Jan Beulich 03 July 2014, 14:34:38 UTC x86-64, vdso: Fix vDSO build breakage due to empty .rela.dyn Certain ld versions (observed with 2.20.0) put an empty .rela.dyn section into shared object files, breaking the assumption on the number of sections to be copied to the final output. Simply discard any empty SHT_REL and SHT_RELA sections to address this. Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/53B5861E02000078000204D1@mail.emea.novell.com Acked-by: Andy Lutomirski <luto@amacapital.net> Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> 10 July 2014, 22:59:56 UTC
4195934 Alexandre Demers 09 July 2014, 02:27:36 UTC drm/radeon/dpm: Reenabling SS on Cayman It reverts commit c745fe611ca42295c9d91d8e305d27983e9132ef now that Cayman is stable since VDDCI fix. Spread spectrum was not the culprit. This depends on b0880e87c1fd038b84498944f52e52c3e86ebe59 (drm/radeon/dpm: fix vddci setup typo on cayman). Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 10 July 2014, 21:01:30 UTC
ed96377 Alex Deucher 08 July 2014, 22:25:25 UTC drm/radeon: fix typo in ci_stop_dpm() Need to use the RREG32_SMC() accessor since the register is an smc indirect index. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 10 July 2014, 21:01:30 UTC
6abafb7 Alex Deucher 07 July 2014, 21:59:37 UTC drm/radeon: fix typo in golden register setup on evergreen Fixes hangs on driver load on some cards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76998 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 10 July 2014, 21:01:29 UTC
9b7d786 Christian König 07 July 2014, 09:16:29 UTC drm/radeon: only print meaningful VM faults Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 10 July 2014, 21:01:28 UTC
f6be5e6 Alex Deucher 03 July 2014, 15:17:55 UTC drm/radeon/dp: return -EIO for flags not zero case If there are error flags in the aux transaction return -EIO rather than -EBUSY. -EIO restarts the whole transaction while -EBUSY jus retries. Fixes problematic aux transfers. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=80684 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 10 July 2014, 21:01:28 UTC
7a7a3b4 Jun'ichi Nomura 08 July 2014, 00:55:14 UTC dm mpath: fix IO hang due to logic bug in multipath_busy Commit e80991773 ("dm mpath: push back requests instead of queueing") modified multipath_busy() to return true if !pg_ready(). pg_ready() checks the current state of the multipath device and may return false even if a new IO is needed to change the state. Bart Van Assche reported that he had multipath IO lockup when he was performing cable pull tests. Analysis showed that the multipath device had a single path group with both paths active, but that the path group itself was not active. During the multipath device state transitions 'queue_io' got set but nothing could clear it. Clearing 'queue_io' only happens in __choose_pgpath(), but it won't be called if multipath_busy() returns true due to pg_ready() returning false when 'queue_io' is set. As such the !pg_ready() check in multipath_busy() is wrong because new IO will not be sent to multipath target and the multipath state change won't happen. That results in multipath IO lockup. The intent of multipath_busy() is to avoid unnecessary cycles of dequeue + request_fn + requeue if it is known that the multipath device will requeue. Such "busy" situations would be: - path group is being activated - there is no path and the multipath is setup to requeue if no path Fix multipath_busy() to return "busy" early only for these specific situations. Reported-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.15 10 July 2014, 20:44:15 UTC
10f1d5d Joe Thornber 27 June 2014, 19:29:04 UTC dm io: fix a race condition in the wake up code for sync_io There's a race condition between the atomic_dec_and_test(&io->count) in dec_count() and the waking of the sync_io() thread. If the thread is spuriously woken immediately after the decrement it may exit, making the on stack io struct invalid, yet the dec_count could still be using it. Fix this race by using a completion in sync_io() and dec_count(). Reported-by: Minfei Huang <huangminfei@ucloud.cn> Signed-off-by: Joe Thornber <thornber@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org 10 July 2014, 20:44:14 UTC
bf14299 Jana Saout 24 June 2014, 18:27:04 UTC dm crypt, dm zero: update author name following legal name change Signed-off-by: Jana Saout <jana@saout.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> 10 July 2014, 20:44:14 UTC
acfe0ad Mikulas Patocka 14 June 2014, 17:44:31 UTC dm: allocate a special workqueue for deferred device removal The commit 2c140a246dc ("dm: allow remove to be deferred") introduced a deferred removal feature for the device mapper. When this feature is used (by passing a flag DM_DEFERRED_REMOVE to DM_DEV_REMOVE_CMD ioctl) and the user tries to remove a device that is currently in use, the device will be removed automatically in the future when the last user closes it. Device mapper used the system workqueue to perform deferred removals. However, some targets (dm-raid1, dm-mpath, dm-stripe) flush work items scheduled for the system workqueue from their destructor. If the destructor itself is called from the system workqueue during deferred removal, it introduces a possible deadlock - the workqueue tries to flush itself. Fix this possible deadlock by introducing a new workqueue for deferred removals. We allocate just one workqueue for all dm targets. The ability of dm targets to process IOs isn't dependent on deferred removal of unused targets, so a deadlock due to shared workqueue isn't possible. Also, cleanup local_init() to eliminate potential for returning success on failure. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.13+ 10 July 2014, 20:44:13 UTC
2091044 Rafael J. Wysocki 10 July 2014, 19:04:37 UTC Merge branch 'pm-cpufreq' * pm-cpufreq: cpufreq: Makefile: fix compilation for davinci platform intel_pstate: Set CPU number before accessing MSRs intel_pstate: Update documentation of {max,min}_perf_pct sysfs files intel_pstate: don't touch turbo bit if turbo disabled or unavailable. intel_pstate: Fix setting VID 10 July 2014, 19:04:37 UTC
ff253d3 Rafael J. Wysocki 10 July 2014, 19:04:25 UTC Merge branch 'acpi-video' * acpi-video: ACPI / video: Add Acer TravelMate B113 to native backlight blacklist ACPI / video: Add Dell Inspiron 5737 to the blacklist ACPI / i915: ignore firmware requests for backlight change 10 July 2014, 19:04:25 UTC
0b80a8f Rafael J. Wysocki 10 July 2014, 19:03:57 UTC Merge branch 'acpi-ec' * acpi-ec: ACPI / EC: Free saved_ec on error exit path ACPI / EC: Add detailed fields debugging support of EC_SC(R). ACPI / EC: Update revision due to recent changes ACPI / EC: Fix race condition in ec_transaction_completed() ACPI / EC: Remove duplicated ec_wait_ibf0() waiter ACPI / EC: Add asynchronous command byte write support ACPI / EC: Avoid race condition related to advance_transaction() 10 July 2014, 19:03:57 UTC
4488c99 Rafael J. Wysocki 10 July 2014, 19:03:25 UTC Merge branches 'acpi-resources', 'acpi-ac', 'acpi-scan' and 'acpi-battery' * acpi-resources: ACPI / resources: only reject zero length resources based at address zero * acpi-ac: Revert "ACPI / AC: Remove AC's proc directory." * acpi-scan: ACPI / PNP: add soc_button_array device ID to PNP IDs list * acpi-battery: ACPI / battery: fix wrong value of capacity_now reported when fully charged ACPI / battery: Retry to get battery information if failed during probing 10 July 2014, 19:03:25 UTC
4c71842 Linus Torvalds 10 July 2014, 18:39:23 UTC Merge branch 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Nothing too interesting. All fixes are ahci_platform related" * 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci_xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command. libahci: export ahci_qc_issue() and ahci_start_fix_rx() ata: ahci_imx: warn when disabling ahci link ahci: disable ncq feature for hisilicon sata ahci: imx: manage only sata_ref_clk in imx_sata_enable[disable] libahci_platform: Fail when PHY required but PHY support disabled 10 July 2014, 18:39:23 UTC
40f6123 Linus Torvalds 10 July 2014, 18:38:23 UTC Merge branch 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "Mostly fixes for the fallouts from the recent cgroup core changes. The decoupled nature of cgroup dynamic hierarchy management (hierarchies are created dynamically on mount but may or may not be reused once unmounted depending on remaining usages) led to more ugliness being added to kernfs. Hopefully, this is the last of it" * 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: break kernfs active protection in cpuset_write_resmask() cgroup: fix a race between cgroup_mount() and cgroup_kill_sb() kernfs: introduce kernfs_pin_sb() cgroup: fix mount failure in a corner case cpuset,mempolicy: fix sleeping function called from invalid context cgroup: fix broken css_has_online_children() 10 July 2014, 18:38:23 UTC
a805cbf Linus Torvalds 10 July 2014, 18:37:41 UTC Merge branch 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fixes from Tejun Heo: "Two workqueue fixes. Both are one liners. One fixes missing uevent for workqueue files on sysfs. The other one fixes missing zeroing of NUMA cpu masks which can lead to oopses among other things" * 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: zero cpumask of wq_numa_possible_cpumask on init workqueue: fix dev_set_uevent_suppress() imbalance 10 July 2014, 18:37:41 UTC
b3e87bd Linus Torvalds 10 July 2014, 18:35:47 UTC Merge branch 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu fix from Tejun Heo: "One patch to fix a typo in percpu section name. Given how long the bug has been there and that there hasn't been any report of brekage, it's unlikely to cause actual issues" * 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: core: fix typo in percpu read_mostly section 10 July 2014, 18:35:47 UTC
8de7471 Linus Torvalds 10 July 2014, 18:31:39 UTC Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c build fix and cleanup from Wolfram Sang: "One buildfix for the i2c subsystem. While here, I decided to add the header cleanup as well" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: sun6i-p2wi: Remove duplicate inclusion of module.h i2c: mux: pca954x: fix dependencies 10 July 2014, 18:31:39 UTC
9ab6e6e Linus Torvalds 10 July 2014, 18:30:57 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This push fixes an error in sha512_ssse3 that leads to incorrect output as well as a memory leak in caam_jr when the module is unloaded" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix memleak in caam_jr module crypto: sha512_ssse3 - fix byte count to bit count conversion 10 July 2014, 18:30:57 UTC
0378c9a Cristian Stoica 07 July 2014, 08:52:41 UTC crypto: caam - fix memleak in caam_jr module This patch fixes a memory leak that appears when caam_jr module is unloaded. Cc: <stable@vger.kernel.org> # 3.13+ Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 10 July 2014, 08:59:13 UTC
f1a1b63 Geert Uytterhoeven 08 July 2014, 07:17:16 UTC m68k: Fix boot regression on machines with RAM at non-zero My enhancement to store the initial mapping size for later reuse in commit 486df8bc4627bdfc032d11bedcd056cc5343ee62 ("m68k: Increase initial mapping to 8 or 16 MiB if possible") broke booting on machines where RAM doesn't start at address zero. Use pc-relative addressing to fix this. Reported-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Andreas Schwab <schwab@linux-m68k.org> 10 July 2014, 07:58:26 UTC
2db38e0 Dave Airlie 10 July 2014, 00:10:06 UTC Merge tag 'drm-intel-fixes-2014-07-09' of git://anongit.freedesktop.org/drm-intel into drm-fixes Fixes for regressions and black screens, cc: stable where applicapable (the last minute rebase was to sprinkle missing stable tags). A bit more than what I'd wish for, but excluding vlv and that the first 3 patches are just quirks for 1 regression it looks much better. There's still a "oops, lost dithering" issue on older platforms open. I'm working on a fix for that now but didn't want to delay this pile. * tag 'drm-intel-fixes-2014-07-09' of git://anongit.freedesktop.org/drm-intel: drm/i915/vlv: T12 eDP panel timing enforcement during reboot drm/i915: Only unbind vgacon, not other console drivers drm/i915: Don't clobber the GTT when it's within stolen memory drm/i915/vlv: Update the DSI ULPS entry/exit sequence drm/i915/vlv: DPI FIFO empty check is not needed drm/i915: Toshiba CB35 has a controllable backlight drm/i915: Acer C720 and C720P have controllable backlights drm/i915: quirk asserts controllable backlight presence, overriding VBT 10 July 2014, 00:10:06 UTC
093fa5d Dave Airlie 10 July 2014, 00:09:33 UTC Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes A couple of DP regression fixes, kepler memory reclocking fixes, and a fix for an annoying display issue that can pop up on resume. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/ram: fix test for gpio presence drm/nouveau/dp: workaround broken display drm/nouveau/dp: fix required link bandwidth calculations drm/nouveau/kms: restore fbcon after display has been resumed drm/nv50-/kms: pass a non-zero value for head to sor dpms methods drm/nouveau/fb: Prevent inlining of ramfuc_reg drm/gk104/ram: bash mpll bit 31 on 10 July 2014, 00:09:33 UTC
6d827fb Guenter Roeck 21 June 2014, 15:08:08 UTC i8k: Fix non-SMP operation Commit f36fdb9f0266 (i8k: Force SMM to run on CPU 0) adds support for multi-core CPUs to the driver. Unfortunately, that causes it to fail loading if compiled without SMP support, at least on 32 bit kernels. Kernel log shows "i8k: unable to get SMM Dell signature", and function i8k_smm is found to return -EINVAL. Testing revealed that the culprit is the missing return value check of set_cpus_allowed_ptr. Fixes: f36fdb9f0266 (i8k: Force SMM to run on CPU 0) Reported-by: Jim Bos <jim876@xs4all.nl> Tested-by: Jim Bos <jim876@xs4all.nl> Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Andreas Mohr <andi@lisas.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 09 July 2014, 23:45:36 UTC
5a7fbe7 Bert Vermeulen 08 July 2014, 12:42:23 UTC USB: ftdi_sio: Add extra PID. This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the Testo 435-4 uses this, likely other gear as well. Signed-off-by: Bert Vermeulen <bert@biot.com> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 09 July 2014, 23:27:40 UTC
4f440cd Linus Torvalds 09 July 2014, 23:18:18 UTC Merge tag 'pci-v3.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Just a fix for the device reset path and an email address update. Virtualization - Fix "wait for pending transactions" for PCI AF reset (Alex Williamson) Miscellaneous - Update mx6 PCI driver maintainer email (Fabio Estevam)" * tag 'pci-v3.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update mx6 PCI driver maintainer's email PCI: Fix unaligned access in AF transaction pending test 09 July 2014, 23:18:18 UTC
9bd2d0d K. Y. Srinivasan 07 July 2014, 23:34:25 UTC Drivers: hv: util: Fix a bug in the KVP code Add code to poll the channel since we process only one message at a time and the host may not interrupt us. Also increase the receive buffer size since some KVP messages are close to 8K bytes in size. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 09 July 2014, 21:34:35 UTC
affb1af K. Y. Srinivasan 07 July 2014, 23:34:24 UTC Drivers: hv: vmbus: Fix a bug in the channel callback dispatch code Starting with Win8, we have implemented several optimizations to improve the scalability and performance of the VMBUS transport between the Host and the Guest. Some of the non-performance critical services cannot leverage these optimization since they only read and process one message at a time. Make adjustments to the callback dispatch code to account for the way non-performance critical drivers handle reading of the channel. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 09 July 2014, 21:34:35 UTC
2a7db85 Greg Kroah-Hartman 09 July 2014, 17:20:37 UTC Merge tag 'usb-serial-3.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v3.16-rc5 Here are some USB-serial updates for v3.16-rc5 that add two new device IDs. Signed-off-by: Johan Hovold <johan@kernel.org> 09 July 2014, 17:20:37 UTC
191d385 Linus Torvalds 09 July 2014, 16:46:58 UTC Merge tag 'f2fs-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs bugfixes from Jaegeuk Kim: "This includes a couple of bug fixes found by xfstests. In addition, one critical bug was reported by Brian Chadwick, which is falling into the infinite loop in balance_dirty_pages. And it turned out due to the IO merging policy in f2fs, which was newly merged in 3.16. - fix normal and recovery path for fallocated regions - fix error case mishandling - recover renamed fsync inodes correctly - fix to get out of infinite loops in balance_dirty_pages - fix kernel NULL pointer error" * tag 'f2fs-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: avoid to access NULL pointer in issue_flush_thread f2fs: check bdi->dirty_exceeded when trying to skip data writes f2fs: do checkpoint for the renamed inode f2fs: release new entry page correctly in error path of f2fs_rename f2fs: fix error path in init_inode_metadata f2fs: check lower bound nid value in check_nid_range f2fs: remove unused variables in f2fs_sm_info f2fs: fix not to allocate unnecessary blocks during fallocate f2fs: recover fallocated data and its i_size together f2fs: fix to report newly allocate region as extent 09 July 2014, 16:46:58 UTC
dd5a675 Michal Marek 08 July 2014, 12:38:33 UTC firmware: Create directories for external firmware Commit 5180d5f4 ("firmware: Simplify directory creation") broke including firmware specified in CONFIG_EXTRA_FIRMWARE: MK_FW firmware/amd-ucode/microcode_amd.bin.gen.S /bin/sh: firmware/amd-ucode/microcode_amd.bin.gen.S: No such file or directory ... firmware/Makefile:185: recipe for target 'firmware/amd-ucode/microcode_amd.bin.gen.S' failed It works with O= builds, because the directory is created by Makefile.build. Create the directory in firmware/Makefile in non-O builds. Reported-and-tested-by: Ronald Uitermark <ronald645@gmail.com> Reported-and-tested-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Michal Marek <mmarek@suse.cz> 09 July 2014, 13:16:35 UTC
50e1f8d Chao Yu 07 July 2014, 01:39:32 UTC f2fs: avoid to access NULL pointer in issue_flush_thread Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=75861 Denis 2014-05-10 11:28:59 UTC reported: "F2FS-fs (mmcblk0p28): mounting.. Unable to handle kernel NULL pointer dereference at virtual address 00000018 ... [<c0a2f678>] (_raw_spin_lock+0x3c/0x70) from [<c03a0330>] (issue_flush_thread+0x50/0x17c) [<c03a0330>] (issue_flush_thread+0x50/0x17c) from [<c01b4064>] (kthread+0x98/0xa4) [<c01b4064>] (kthread+0x98/0xa4) from [<c0108060>] (kernel_thread_exit+0x0/0x8)" This patch assign cmd_control_info in sm_info before issue_flush_thread is being created, so this make sure that issue flush thread will have no chance to access invalid info in fcc. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 09 July 2014, 12:59:55 UTC
2743f86 Jaegeuk Kim 27 June 2014, 16:00:41 UTC f2fs: check bdi->dirty_exceeded when trying to skip data writes If we don't check the current backing device status, balance_dirty_pages can fall into infinite pausing routine. This can be occurred when a lot of directories make a small number of dirty dentry pages including files. Reported-by: Brian Chadwick <brianchad@westnet.com.au> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 09 July 2014, 12:59:45 UTC
b2c0829 Jaegeuk Kim 30 June 2014, 09:09:55 UTC f2fs: do checkpoint for the renamed inode If an inode is renamed, it should be registered as file_lost_pino to conduct checkpoint at f2fs_sync_file. Otherwise, the inode cannot be recovered due to no dent_mark in the following scenario. Note that, this scenario is from xfstests/322. 1. create "a" 2. fsync "a" 3. rename "a" to "b" 4. fsync "b" 5. Sudden power-cut After recovery is done, "b" should be seen. However, the result shows "a", since the recovery procedure does not enter recover_dentry due to no dent_mark. The reason is like below. - The nid of "a" is checkpointed during #2, f2fs_sync_file. - The inode page for "b" produced by #3 is written without dent_mark by sync_node_pages. So, this patch fixes this bug by assinging file_lost_pino to the "a"'s inode. If the pino is lost, f2fs_sync_file conducts checkpoint, and then recovers the latest pino and its dentry information for further recovery. Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 09 July 2014, 12:59:31 UTC
dd4d961 Chao Yu 24 June 2014, 06:13:13 UTC f2fs: release new entry page correctly in error path of f2fs_rename This patch correct releasing code of new_page to avoid BUG_ON in error patch of f2fs_rename. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 09 July 2014, 12:59:11 UTC
90d7245 Chao Yu 24 June 2014, 02:34:00 UTC f2fs: fix error path in init_inode_metadata If we fail in this path: ->init_inode_metadata ->make_empty_dir ->get_new_data_page ->grab_cache_page return -ENOMEM We will bug on in error path of init_inode_metadata when call remove_inode_page because i_block = 2 (one inode block will be released later & one dentry block). We should release the dentry block in init_inode_metadata to avoid this BUG_ON, and avoid leak of dentry block resource, because we never have second chance to release that block in ->evict_inode as in upper error path we make this inode 'bad'. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 09 July 2014, 12:58:50 UTC
d6b7d4b Chao Yu 12 June 2014, 05:23:41 UTC f2fs: check lower bound nid value in check_nid_range This patch add lower bound verification for nid in check_nid_range, so nids reserved like 0, node, meta passed by caller could be checked there. And then check_nid_range could be used in f2fs_nfs_get_inode for simplifying code. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 09 July 2014, 12:58:08 UTC
8bc6f60 Chao Yu 11 June 2014, 10:32:23 UTC f2fs: remove unused variables in f2fs_sm_info Remove unused variables in struct f2fs_sm_info. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> 09 July 2014, 12:57:57 UTC
c128c77 Zhang Rui 09 July 2014, 12:31:04 UTC ACPI / PNP: add soc_button_array device ID to PNP IDs list The soc_button_array PNP driver was introduced in 3.15. But in commit eec15edbb0e1 (ACPI / PNP: use device ID list for PNPACPI device enumeration), when reworking the PNPACPI device enumeration, we missed the soc_button_array device ID. This results in a regression in 3.16-rc1 that soc_button_array pnp device fails to be enumerated. Fix the problem by adding soc_button_array device ID into the acpi_pnp scan handler's ID list. Fixes: eec15edbb0e1 (ACPI / PNP: use device ID list for PNPACPI device enumeration) Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 09 July 2014, 12:31:04 UTC
01527b3 Clint Taylor 07 July 2014, 20:01:46 UTC drm/i915/vlv: T12 eDP panel timing enforcement during reboot The panel power sequencer on vlv doesn't appear to accept changes to its T12 power down duration during warm reboots. This change forces a delay for warm reboots to the T12 panel timing as defined in the VBT table for the connected panel. Ver2: removed redundant pr_crit(), commented magic value for pp_div_reg Ver3: moved SYS_RESTART check earlier, new name for pp_div. Ver4: Minor issue changes Ver5: Move registration of reboot notifier to edp_connector_init, Added warning comment to handler about lack of PM notification. Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 09 July 2014, 07:52:14 UTC
1bb9e63 Daniel Vetter 08 July 2014, 08:02:43 UTC drm/i915: Only unbind vgacon, not other console drivers The console subsystem only provides a function to switch to a given console, but we want to actually only switach away from vgacon. Unconditionally switching to the dummy console resulted in switching away from fbcon in multi-gpu setups when other gpu drivers are loaded before i915. Then either the reinitialization of fbcon when i915 registers its fbdev emulation or the teardown of the fbcon driver killed the machine. So only switch to the dummy console when it's required. Kudos to Chris for the original idea, I've only refined it a bit to still unregister vgacon even when it's currently unused. This regression has been introduced in commit a4de05268e674e8ed31df6348269e22d6c6a1803 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jun 5 16:20:46 2014 +0200 drm/i915: Kick out vga console Reported-and-tested-by: Ed Tomlinson <edt@aei.ca> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 09 July 2014, 07:52:13 UTC
f1e1c21 Ville Syrjälä 05 June 2014, 17:02:59 UTC drm/i915: Don't clobber the GTT when it's within stolen memory On most gen2-4 platforms the GTT can be (or maybe always is?) inside the stolen memory region. If that's the case, reduce the size of the stolen memory appropriately to make make sure we don't clobber the GTT. v2: Deal with gen4 36 bit physical address Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80151 Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 09 July 2014, 07:52:13 UTC
aceb365 Shobhit Kumar 03 July 2014, 11:05:41 UTC drm/i915/vlv: Update the DSI ULPS entry/exit sequence We should keep DEVICE_READY bit set in the ULPS enter sequence. In exit sequence also we should set DEVICE_READY, but thats causing blankout for me. Also exit sequence is simplified as per hw team recommendation. This should fix - [drm:intel_dsi_clear_device_ready] *ERROR* DSI LP not going Low Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80818 Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> 09 July 2014, 07:52:04 UTC
a799a97 Shobhit Kumar 03 July 2014, 11:05:40 UTC drm/i915/vlv: DPI FIFO empty check is not needed While sending DPI SHUTDOWN command, we cannot wait for FIFO empty as pipes are not disabled at that time. In case of MIPI we disable port first and send SHUTDOWN command while pipe is still running and FIFOs will not be empty, causing spurious error log Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> 09 July 2014, 07:51:53 UTC
d4967d8 Scot Doyle 03 July 2014, 23:27:52 UTC drm/i915: Toshiba CB35 has a controllable backlight The Toshiba CB35 Chromebook (with Celeron 2955U CPU) has a controllable backlight although its VBT reports otherwise. Apply quirk to ignore the backlight presence check during backlight setup. Patch tested by author on Toshiba CB35. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813 Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> CC: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org # 3.15 only [danvet: Add cc: stable because the regressing commit is in 3.15.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 09 July 2014, 07:51:01 UTC
2e93a1a Scot Doyle 03 July 2014, 23:27:51 UTC drm/i915: Acer C720 and C720P have controllable backlights The Acer C720 and C720P Chromebooks (with Celeron 2955U CPU) have a controllable backlight although their VBT reports otherwise. Apply quirk to ignore the backlight presence check during backlight setup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813 Tested-by: James Duley <jagduley@gmail.com> Tested-by: Michael Mullin <masmullin@gmail.com> Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> CC: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org # 3.15 only [danvet: Add cc: stable because the regressing commit is in 3.15.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 09 July 2014, 07:50:52 UTC
9c72cc6 Scot Doyle 03 July 2014, 23:27:50 UTC drm/i915: quirk asserts controllable backlight presence, overriding VBT commit c675949ec58ca50d5a3ae3c757892f1560f6e896 Author: Jani Nikula <jani.nikula@intel.com> Date: Wed Apr 9 11:31:37 2014 +0300 drm/i915: do not setup backlight if not available according to VBT caused a regression on machines with a misconfigured VBT. Add a quirk to assert the presence of a controllable backlight. Use it to ignore the VBT backlight presence check during backlight setup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813 Tested-by: James Duley <jagduley@gmail.com> Tested-by: Michael Mullin <masmullin@gmail.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org # 3.15 only [danvet: Add cc: stable because the regressing commit is in 3.15.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> 09 July 2014, 07:50:05 UTC
5a90af6 Prabhakar Lad 08 July 2014, 15:25:38 UTC cpufreq: Makefile: fix compilation for davinci platform Since commtit 8a7b1227e303 (cpufreq: davinci: move cpufreq driver to drivers/cpufreq) this added dependancy only for CONFIG_ARCH_DAVINCI_DA850 where as davinci_cpufreq_init() call is used by all davinci platform. This patch fixes following build error: arch/arm/mach-davinci/built-in.o: In function `davinci_init_late': :(.init.text+0x928): undefined reference to `davinci_cpufreq_init' make: *** [vmlinux] Error 1 Fixes: 8a7b1227e303 (cpufreq: davinci: move cpufreq driver to drivers/cpufreq) Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 09 July 2014, 00:54:15 UTC
bdac8ca Greg Kroah-Hartman 08 July 2014, 22:43:45 UTC Merge tag 'iio-fixes-for-3.16c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Third round of iio fixes for the 3.16 cycle. * Lots of hid sensors component drivers had a bug due to a local variable whose name suggested it was returned from the read_raw function not infact being returned (ret vs ret_type). Fixed and unused ret removed. * Block a possible race condition in tcs3472 by locking around some dependant i2c messages. * Fix bug in the am335x driver fifo setup that occurs if the final channel enabled takes certain values. 08 July 2014, 22:43:45 UTC
baa3c65 Jan Kardell 06 November 2014, 22:18:00 UTC iio: ti_am335x_adc: Fix: Use same step id at FIFOs both ends Since AI lines could be selected at will (linux-3.11) the sending and receiving ends of the FIFO does not agree about what step is used for a line. It only works if the last lines are used, like 5,6,7, and fails if ie 2,4,6 is selected in DT. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Tested-by: Zubair Lutfullah <zubair.lutfullah@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: stable@vger.kernel.org 08 July 2014, 20:21:22 UTC
163e407 Linus Torvalds 08 July 2014, 19:08:33 UTC Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix a number of zero-day bugs, mostly found with module test scripts. Nothing major, but potentially annoying and worthwhile to fix" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (adc128d818) Drop write support on inX_input attributes hwmon: (emc2103) Clamp limits instead of bailing out hwmon: (adm1031) Fix writes to limit registers hwmon: (adm1021) Fix cache problem when writing temperature limits hwmon: (adm1029) Ensure the fan_div cache is updated in set_fan_div hwmon: (amc6821) Fix permissions for temp2_input hwmon: (ntc_thermistor) Correct information printed during probe 08 July 2014, 19:08:33 UTC
fa2ec3e Colin Cross 18 June 2014, 20:10:09 UTC arm64: implement TASK_SIZE_OF include/linux/sched.h implements TASK_SIZE_OF as TASK_SIZE if it is not set by the architecture headers. TASK_SIZE uses the current task to determine the size of the virtual address space. On a 64-bit kernel this will cause reading /proc/pid/pagemap of a 64-bit process from a 32-bit process to return EOF when it reads past 0xffffffff. Implement TASK_SIZE_OF exactly the same as TASK_SIZE with test_tsk_thread_flag instead of test_thread_flag. Cc: stable@vger.kernel.org Signed-off-by: Colin Cross <ccross@android.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 08 July 2014, 16:30:59 UTC
bec7ced Mark Salter 17 June 2014, 17:14:26 UTC arm64: export __cpu_{clear,copy}_user_page functions The __cpu_clear_user_page() and __cpu_copy_user_page() functions are not currently exported. This prevents modules from using clear_user_page() and copy_user_page(). Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 08 July 2014, 16:30:51 UTC
back to top