Skip to main content

Browse the archive

https://github.com/torvalds/linux
27 March 2024, 02:37:15 UTC
sort by:
Revision Author Date Message Commit Date
79b3075 Jay Vosburgh 27 March 2014, 17:33:44 UTC MAINTAINERS: bonding: change email address Update my email address. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2014, 20:57:38 UTC
c15b1cc Hannes Frederic Sowa 27 March 2014, 17:28:07 UTC ipv6: move DAD and addrconf_verify processing to workqueue addrconf_join_solict and addrconf_join_anycast may cause actions which need rtnl locked, especially on first address creation. A new DAD state is introduced which defers processing of the initial DAD processing into a workqueue. To get rtnl lock we need to push the code paths which depend on those calls up to workqueues, specifically addrconf_verify and the DAD processing. (v2) addrconf_dad_failure needs to be queued up to the workqueue, too. This patch introduces a new DAD state and stop the DAD processing in the workqueue (this is because of the possible ipv6_del_addr processing which removes the solicited multicast address from the device). addrconf_verify_lock is removed, too. After the transition it is not needed any more. As we are not processing in bottom half anymore we need to be a bit more careful about disabling bottom half out when we lock spin_locks which are also used in bh. Relevant backtrace: [ 541.030090] RTNL: assertion failed at net/core/dev.c (4496) [ 541.031143] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 3.10.33-1-amd64-vyatta #1 [ 541.031145] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 541.031146] ffffffff8148a9f0 000000000000002f ffffffff813c98c1 ffff88007c4451f8 [ 541.031148] 0000000000000000 0000000000000000 ffffffff813d3540 ffff88007fc03d18 [ 541.031150] 0000880000000006 ffff88007c445000 ffffffffa0194160 0000000000000000 [ 541.031152] Call Trace: [ 541.031153] <IRQ> [<ffffffff8148a9f0>] ? dump_stack+0xd/0x17 [ 541.031180] [<ffffffff813c98c1>] ? __dev_set_promiscuity+0x101/0x180 [ 541.031183] [<ffffffff813d3540>] ? __hw_addr_create_ex+0x60/0xc0 [ 541.031185] [<ffffffff813cfe1a>] ? __dev_set_rx_mode+0xaa/0xc0 [ 541.031189] [<ffffffff813d3a81>] ? __dev_mc_add+0x61/0x90 [ 541.031198] [<ffffffffa01dcf9c>] ? igmp6_group_added+0xfc/0x1a0 [ipv6] [ 541.031208] [<ffffffff8111237b>] ? kmem_cache_alloc+0xcb/0xd0 [ 541.031212] [<ffffffffa01ddcd7>] ? ipv6_dev_mc_inc+0x267/0x300 [ipv6] [ 541.031216] [<ffffffffa01c2fae>] ? addrconf_join_solict+0x2e/0x40 [ipv6] [ 541.031219] [<ffffffffa01ba2e9>] ? ipv6_dev_ac_inc+0x159/0x1f0 [ipv6] [ 541.031223] [<ffffffffa01c0772>] ? addrconf_join_anycast+0x92/0xa0 [ipv6] [ 541.031226] [<ffffffffa01c311e>] ? __ipv6_ifa_notify+0x11e/0x1e0 [ipv6] [ 541.031229] [<ffffffffa01c3213>] ? ipv6_ifa_notify+0x33/0x50 [ipv6] [ 541.031233] [<ffffffffa01c36c8>] ? addrconf_dad_completed+0x28/0x100 [ipv6] [ 541.031241] [<ffffffff81075c1d>] ? task_cputime+0x2d/0x50 [ 541.031244] [<ffffffffa01c38d6>] ? addrconf_dad_timer+0x136/0x150 [ipv6] [ 541.031247] [<ffffffffa01c37a0>] ? addrconf_dad_completed+0x100/0x100 [ipv6] [ 541.031255] [<ffffffff8105313a>] ? call_timer_fn.isra.22+0x2a/0x90 [ 541.031258] [<ffffffffa01c37a0>] ? addrconf_dad_completed+0x100/0x100 [ipv6] Hunks and backtrace stolen from a patch by Stephen Hemminger. Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2014, 20:54:50 UTC
e2a1d3e Eric Dumazet 27 March 2014, 14:19:19 UTC tcp: fix get_timewait4_sock() delay computation on 64bit It seems I missed one change in get_timewait4_sock() to compute the remaining time before deletion of IPV4 timewait socket. This could result in wrong output in /proc/net/tcp for tm->when field. Fixes: 96f817fedec4 ("tcp: shrink tcp6_timewait_sock by one cache line") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2014, 20:43:14 UTC
4f647e0 Flavio Leitner 27 March 2014, 14:05:34 UTC openvswitch: fix a possible deadlock and lockdep warning There are two problematic situations. A deadlock can happen when is_percpu is false because it can get interrupted while holding the spinlock. Then it executes ovs_flow_stats_update() in softirq context which tries to get the same lock. The second sitation is that when is_percpu is true, the code correctly disables BH but only for the local CPU, so the following can happen when locking the remote CPU without disabling BH: CPU#0 CPU#1 ovs_flow_stats_get() stats_read() +->spin_lock remote CPU#1 ovs_flow_stats_get() | <interrupted> stats_read() | ... +--> spin_lock remote CPU#0 | | <interrupted> | ovs_flow_stats_update() | ... | spin_lock local CPU#0 <--+ ovs_flow_stats_update() +---------------------------------- spin_lock local CPU#1 This patch disables BH for both cases fixing the deadlocks. Acked-by: Jesse Gross <jesse@nicira.com> ================================= [ INFO: inconsistent lock state ] 3.14.0-rc8-00007-g632b06a #1 Tainted: G I --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[5]:HE1:SE0] takes: (&(&cpu_stats->lock)->rlock){+.?...}, at: [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810f973f>] __lock_acquire+0x68f/0x1c40 [<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0 [<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa05dd9e4>] ovs_flow_stats_get+0xc4/0x1e0 [openvswitch] [<ffffffffa05da855>] ovs_flow_cmd_fill_info+0x185/0x360 [openvswitch] [<ffffffffa05daf05>] ovs_flow_cmd_build_info.constprop.27+0x55/0x90 [openvswitch] [<ffffffffa05db41d>] ovs_flow_cmd_new_or_set+0x4dd/0x570 [openvswitch] [<ffffffff816c245d>] genl_family_rcv_msg+0x1cd/0x3f0 [<ffffffff816c270e>] genl_rcv_msg+0x8e/0xd0 [<ffffffff816c0239>] netlink_rcv_skb+0xa9/0xc0 [<ffffffff816c0798>] genl_rcv+0x28/0x40 [<ffffffff816bf830>] netlink_unicast+0x100/0x1e0 [<ffffffff816bfc57>] netlink_sendmsg+0x347/0x770 [<ffffffff81668e9c>] sock_sendmsg+0x9c/0xe0 [<ffffffff816692d9>] ___sys_sendmsg+0x3a9/0x3c0 [<ffffffff8166a911>] __sys_sendmsg+0x51/0x90 [<ffffffff8166a962>] SyS_sendmsg+0x12/0x20 [<ffffffff817e3ce9>] system_call_fastpath+0x16/0x1b irq event stamp: 1740726 hardirqs last enabled at (1740726): [<ffffffff8175d5e0>] ip6_finish_output2+0x4f0/0x840 hardirqs last disabled at (1740725): [<ffffffff8175d59b>] ip6_finish_output2+0x4ab/0x840 softirqs last enabled at (1740674): [<ffffffff8109be12>] _local_bh_enable+0x22/0x50 softirqs last disabled at (1740675): [<ffffffff8109db05>] irq_exit+0xc5/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&cpu_stats->lock)->rlock); <Interrupt> lock(&(&cpu_stats->lock)->rlock); *** DEADLOCK *** 5 locks held by swapper/0/0: #0: (((&ifa->dad_timer))){+.-...}, at: [<ffffffff810a7155>] call_timer_fn+0x5/0x320 #1: (rcu_read_lock){.+.+..}, at: [<ffffffff81788a55>] mld_sendpack+0x5/0x4a0 #2: (rcu_read_lock_bh){.+....}, at: [<ffffffff8175d149>] ip6_finish_output2+0x59/0x840 #3: (rcu_read_lock_bh){.+....}, at: [<ffffffff8168ba75>] __dev_queue_xmit+0x5/0x9b0 #4: (rcu_read_lock){.+.+..}, at: [<ffffffffa05e41b5>] internal_dev_xmit+0x5/0x110 [openvswitch] stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G I 3.14.0-rc8-00007-g632b06a #1 Hardware name: /DX58SO, BIOS SOX5810J.86A.5599.2012.0529.2218 05/29/2012 0000000000000000 0fcf20709903df0c ffff88042d603808 ffffffff817cfe3c ffffffff81c134c0 ffff88042d603858 ffffffff817cb6da 0000000000000005 ffffffff00000001 ffff880400000000 0000000000000006 ffffffff81c134c0 Call Trace: <IRQ> [<ffffffff817cfe3c>] dump_stack+0x4d/0x66 [<ffffffff817cb6da>] print_usage_bug+0x1f4/0x205 [<ffffffff810f7f10>] ? check_usage_backwards+0x180/0x180 [<ffffffff810f8963>] mark_lock+0x223/0x2b0 [<ffffffff810f96d3>] __lock_acquire+0x623/0x1c40 [<ffffffff810f5707>] ? __lock_is_held+0x57/0x80 [<ffffffffa05e26c6>] ? masked_flow_lookup+0x236/0x250 [openvswitch] [<ffffffff810fb4e2>] lock_acquire+0xa2/0x1d0 [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch] [<ffffffff817d8d9e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa05dd8a1>] ? ovs_flow_stats_update+0x51/0xd0 [openvswitch] [<ffffffffa05dd8a1>] ovs_flow_stats_update+0x51/0xd0 [openvswitch] [<ffffffffa05dcc64>] ovs_dp_process_received_packet+0x84/0x120 [openvswitch] [<ffffffff810f93f7>] ? __lock_acquire+0x347/0x1c40 [<ffffffffa05e3bea>] ovs_vport_receive+0x2a/0x30 [openvswitch] [<ffffffffa05e4218>] internal_dev_xmit+0x68/0x110 [openvswitch] [<ffffffffa05e41b5>] ? internal_dev_xmit+0x5/0x110 [openvswitch] [<ffffffff8168b4a6>] dev_hard_start_xmit+0x2e6/0x8b0 [<ffffffff8168be87>] __dev_queue_xmit+0x417/0x9b0 [<ffffffff8168ba75>] ? __dev_queue_xmit+0x5/0x9b0 [<ffffffff8175d5e0>] ? ip6_finish_output2+0x4f0/0x840 [<ffffffff8168c430>] dev_queue_xmit+0x10/0x20 [<ffffffff8175d641>] ip6_finish_output2+0x551/0x840 [<ffffffff8176128a>] ? ip6_finish_output+0x9a/0x220 [<ffffffff8176128a>] ip6_finish_output+0x9a/0x220 [<ffffffff8176145f>] ip6_output+0x4f/0x1f0 [<ffffffff81788c29>] mld_sendpack+0x1d9/0x4a0 [<ffffffff817895b8>] mld_send_initial_cr.part.32+0x88/0xa0 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220 [<ffffffff8178e301>] ipv6_mc_dad_complete+0x31/0x50 [<ffffffff817690d7>] addrconf_dad_completed+0x147/0x220 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220 [<ffffffff8176934f>] addrconf_dad_timer+0x19f/0x1c0 [<ffffffff810a71e9>] call_timer_fn+0x99/0x320 [<ffffffff810a7155>] ? call_timer_fn+0x5/0x320 [<ffffffff817691b0>] ? addrconf_dad_completed+0x220/0x220 [<ffffffff810a76c4>] run_timer_softirq+0x254/0x3b0 [<ffffffff8109d47d>] __do_softirq+0x12d/0x480 Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2014, 20:41:53 UTC
99b192d Toshiaki Makita 27 March 2014, 12:46:56 UTC bridge: Fix handling stacked vlan tags If a bridge with vlan_filtering enabled receives frames with stacked vlan tags, i.e., they have two vlan tags, br_vlan_untag() strips not only the outer tag but also the inner tag. br_vlan_untag() is called only from br_handle_vlan(), and in this case, it is enough to set skb->vlan_tci to 0 here, because vlan_tci has already been set before calling br_handle_vlan(). Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2014, 20:33:09 UTC
12464bb Toshiaki Makita 27 March 2014, 12:46:55 UTC bridge: Fix inabillity to retrieve vlan tags when tx offload is disabled Bridge vlan code (br_vlan_get_tag()) assumes that all frames have vlan_tci if they are tagged, but if vlan tx offload is manually disabled on bridge device and frames are sent from vlan device on the bridge device, the tags are embedded in skb->data and they break this assumption. Extract embedded vlan tags and move them to vlan_tci at ingress. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2014, 20:33:09 UTC
a39ee44 Michael S. Tsirkin 27 March 2014, 10:53:37 UTC vhost: validate vhost_get_vq_desc return value vhost fails to validate negative error code from vhost_get_vq_desc causing a crash: we are using -EFAULT which is 0xfffffff2 as vector size, which exceeds the allocated size. The code in question was introduced in commit 8dd014adfea6f173c1ef6378f7e5e7924866c923 vhost-net: mergeable buffers support CVE-2014-0055 Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2014, 20:10:35 UTC
d8316f3 Michael S. Tsirkin 27 March 2014, 10:00:26 UTC vhost: fix total length when packets are too short When mergeable buffers are disabled, and the incoming packet is too large for the rx buffer, get_rx_bufs returns success. This was intentional in order for make recvmsg truncate the packet and then handle_rx would detect err != sock_len and drop it. Unfortunately we pass the original sock_len to recvmsg - which means we use parts of iov not fully validated. Fix this up by detecting this overrun and doing packet drop immediately. CVE-2014-0077 Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2014, 20:07:31 UTC
05efa8c Sasha Levin 28 March 2014, 16:38:42 UTC random32: avoid attempt to late reseed if in the middle of seeding Commit 4af712e8df ("random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized") has added a late reseed stage that happens as soon as the nonblocking pool is marked as initialized. This fails in the case that the nonblocking pool gets initialized during __prandom_reseed()'s call to get_random_bytes(). In that case we'd double back into __prandom_reseed() in an attempt to do a late reseed - deadlocking on 'lock' early on in the boot process. Instead, just avoid even waiting to do a reseed if a reseed is already occuring. Fixes: 4af712e8df99 ("random32: add prandom_reseed_late() and call when nonblocking pool becomes initialized") Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2014, 20:04:19 UTC
335a67d Sasha Levin 27 March 2014, 06:01:34 UTC random32: assign to network folks in MAINTAINERS lib/random32.c was split out of the network code and is de-facto still maintained by the almighty net/ gods. Make it a bit more official so that people who aren't aware of that know where to send their patches. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 March 2014, 20:03:00 UTC
97a5221 Wei Yang 27 March 2014, 01:28:31 UTC net/mlx4_core: pass pci_device_id.driver_data to __mlx4_init_one during reset The second parameter of __mlx4_init_one() is used to identify whether the pci_dev is a PF or VF. Currently, when it is invoked in mlx4_pci_slot_reset() this information is missed. This patch match the pci_dev with mlx4_pci_table and passes the pci_device_id.driver_data to __mlx4_init_one() in mlx4_pci_slot_reset(). Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 March 2014, 19:35:33 UTC
36d5fe6 Zoltan Kiss 26 March 2014, 22:37:45 UTC core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors skb_zerocopy can copy elements of the frags array between skbs, but it doesn't orphan them. Also, it doesn't handle errors, so this patch takes care of that as well, and modify the callers accordingly. skb_tx_error() is also added to the callers so they will signal the failed delivery towards the creator of the skb. Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 March 2014, 19:29:38 UTC
fc0d48b Vlad Yasevich 26 March 2014, 15:47:56 UTC vlan: Set hard_header_len according to available acceleration Currently, if the card supports CTAG acceleration we do not account for the vlan header even if we are configuring an 8021AD vlan. This may not be best since we'll do software tagging for 8021AD which will cause data copy on skb head expansion Configure the length based on available hw offload capabilities and vlan protocol. CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 March 2014, 19:00:37 UTC
14a0d63 Oliver Neukum 26 March 2014, 13:32:51 UTC usbnet: include wait queue head in device structure This fixes a race which happens by freeing an object on the stack. Quoting Julius: > The issue is > that it calls usbnet_terminate_urbs() before that, which temporarily > installs a waitqueue in dev->wait in order to be able to wait on the > tasklet to run and finish up some queues. The waiting itself looks > okay, but the access to 'dev->wait' is totally unprotected and can > race arbitrarily. I think in this case usbnet_bh() managed to succeed > it's dev->wait check just before usbnet_terminate_urbs() sets it back > to NULL. The latter then finishes and the waitqueue_t structure on its > stack gets overwritten by other functions halfway through the > wake_up() call in usbnet_bh(). The fix is to just not allocate the data structure on the stack. As dev->wait is abused as a flag it also takes a runtime PM change to fix this bug. Signed-off-by: Oliver Neukum <oneukum@suse.de> Reported-by: Grant Grundler <grundler@google.com> Tested-by: Grant Grundler <grundler@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 March 2014, 18:59:10 UTC
681daee Jason Wang 26 March 2014, 05:03:00 UTC virtio-net: correct error handling of virtqueue_kick() Current error handling of virtqueue_kick() was wrong in two places: - The skb were freed immediately when virtqueue_kick() fail during xmit. This may lead double free since the skb was not detached from the virtqueue. - try_fill_recv() returns false when virtqueue_kick() fail. This will lead unnecessary rescheduling of refill work. Actually, it's safe to just ignore the kick failure in those two places. So this patch fixes this by partially revert commit 67975901183799af8e93ec60e322f9e2a1940b9b. Fixes 67975901183799af8e93ec60e322f9e2a1940b9b (virtio_net: verify if virtqueue_kick() succeeded). Cc: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 March 2014, 17:13:21 UTC
de14439 Eric Dumazet 26 March 2014, 01:42:27 UTC net: unix: non blocking recvmsg() should not return -EINTR Some applications didn't expect recvmsg() on a non blocking socket could return -EINTR. This possibility was added as a side effect of commit b3ca9b02b00704 ("net: fix multithreaded signal handling in unix recv routines"). To hit this bug, you need to be a bit unlucky, as the u->readlock mutex is usually held for very small periods. Fixes: b3ca9b02b00704 ("net: fix multithreaded signal handling in unix recv routines") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Rainer Weikusat <rweikusat@mobileactivedefense.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 March 2014, 21:05:40 UTC
dc0fe58 David S. Miller 26 March 2014, 20:53:04 UTC Merge branch 'mvneta' Thomas Petazzoni says: ==================== net: mvneta: fix usage as a module The following set of two patches fix the usage of the mvneta driver when built as a module, and used in RGMII configurations. It is somewhat similar to a previous fix that was made by Arnaud Patard, but which was limited to SGMII configurations. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 26 March 2014, 20:53:04 UTC
b5f3b75 Thomas Petazzoni 25 March 2014, 23:26:55 UTC net: mvneta: use devm_ioremap_resource() instead of of_iomap() The mvneta driver currently uses of_iomap(), which has two drawbacks: it doesn't request the resource, and it isn't devm-style so some error handling is needed. This commit switches to use devm_ioremap_resource() instead, which automatically requests the resource (so the I/O registers region shows up properly in /proc/iomem), and also is devm-style, which allows to get rid of some error handling to unmap the I/O registers region. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 March 2014, 20:52:42 UTC
e3a8786 Thomas Petazzoni 25 March 2014, 23:25:42 UTC net: mvneta: fix usage as a module on RGMII configurations Commit 5445eaf309ff ('mvneta: Try to fix mvneta when compiled as module') fixed the mvneta driver to make it work properly when loaded as a module in SGMII configuration, which was tested successful by the author on the Armada XP OpenBlocks AX3, which uses SGMII. However, it turns out that the Armada XP GP, which uses RGMII, is affected by a similar problem: its SERDES configuration is lost when mvneta is loaded as a module, because this configuration is set by the bootloader, and then lost because the clock is gated by the clock framework until the mvneta driver is loaded again and the clock is re-enabled. However, it turns out that for the RGMII case, setting the SERDES configuration is not sufficient: the PCS enable bit in the MVNETA_GMAC_CTRL_2 register must also be set, like in the SGMII configuration. Therefore, this commit reworks the SGMII/RGMII initialization: the only difference between the two now is a different SERDES configuration, all the rest is identical. In detail, to achieve this, the commit: * Renames MVNETA_SGMII_SERDES_CFG to MVNETA_SERDES_CFG because it is not specific to SGMII, but also used on RGMII configurations. * Adds a MVNETA_RGMII_SERDES_PROTO definition, that must be used as the MVNETA_SERDES_CFG value in RGMII configurations. * Removes the mvneta_gmac_rgmii_set() and mvneta_port_sgmii_config() functions, and instead directly do the SGMII/RGMII configuration in mvneta_port_up(), from where those functions where called. It is worth mentioning that mvneta_gmac_rgmii_set() had an 'enable' parameter that was always passed as '1', so it was pretty useless. * Reworks the mvneta_port_up() function to set the MVNETA_SERDES_CFG register to the appropriate value depending on the RGMII vs. SGMII configuration. It also unconditionally set the PCS_ENABLE bit (was already done for SGMII, but is now also needed for RGMII), and sets the PORT_RGMII bit (which was already done for both SGMII and RGMII). This commit was successfully tested with mvneta compiled as a module, on both the OpenBlocks AX3 (SGMII configuration) and the Armada XP GP (RGMII configuration). Reported-by: Steve McIntyre <steve@einval.com> Cc: stable@vger.kernel.org # 3.11.x: 5445eaf309ff mvneta: Try to fix mvneta when compiled as module Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 March 2014, 20:52:41 UTC
a79121d Thomas Petazzoni 25 March 2014, 23:25:41 UTC net: mvneta: rename MVNETA_GMAC2_PSC_ENABLE to MVNETA_GMAC2_PCS_ENABLE Bit 3 of the MVNETA_GMAC_CTRL_2 is actually used to enable the PCS, not the PSC: there was a typo in the name of the define, which this commit fixes. Cc: stable@vger.kernel.org Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 March 2014, 20:52:41 UTC
51dfe7b Vlad Yasevich 24 March 2014, 21:52:12 UTC tg3: Do not include vlan acceleration features in vlan_features Including hardware acceleration features in vlan_features breaks stacked vlans (Q-in-Q) by marking the bottom vlan interface as capable of acceleration. This causes one of the tags to be lost and the packets are sent with a sing vlan header. CC: Nithin Nayak Sujir <nsujir@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 March 2014, 19:55:10 UTC
fbd02dd Pravin B Shelar 24 March 2014, 05:06:36 UTC ip_tunnel: Fix dst ref-count. Commit 10ddceb22ba (ip_tunnel:multicast process cause panic due to skb->_skb_refdst NULL pointer) removed dst-drop call from ip-tunnel-recv. Following commit reintroduce dst-drop and fix the original bug by checking loopback packet before releasing dst. Original bug: https://bugzilla.kernel.org/show_bug.cgi?id=70681 CC: Xin Long <lucien.xin@gmail.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 March 2014, 19:18:40 UTC
632b06a Linus Torvalds 25 March 2014, 22:24:11 UTC Merge branch 'nfsd-next' of git://linux-nfs.org/~bfields/linux Pull nfsd fix frm Bruce Fields: "J R Okajima sent this early and I was just slow to pass it along, apologies. Fortunately it's a simple fix" * 'nfsd-next' of git://linux-nfs.org/~bfields/linux: nfsd: fix lost nfserrno() call in nfsd_setattr() 25 March 2014, 22:24:11 UTC
3e79d97 Linus Torvalds 25 March 2014, 22:05:57 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "These four commits are obvious fixes (a couple of fdget_pos()-related ones from Eric Biggers, prepend_name() fix, missing checks for false negatives from __lookup_mnt() in fs/namei.c)" For now I'm pulling just the four obvious fixes, there's another four pending in Al's 'for-linus' branch wrt the mnt_hash list that were more involved. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: rcuwalk: recheck mount_lock after mountpoint crossing attempts make prepend_name() work correctly when called with negative *buflen vfs: Don't let __fdget_pos() get FMODE_PATH files vfs: atomic f_pos access in llseek() 25 March 2014, 22:05:57 UTC
b098d67 Linus Torvalds 25 March 2014, 02:31:17 UTC Linux 3.14-rc8 25 March 2014, 02:31:17 UTC
8223164 Linus Torvalds 25 March 2014, 00:36:58 UTC Merge branch 'parisc-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: - revert parts of the latest patch regarding font selection with STICON console - wire up the utimes() syscall for parisc - remove the unused parisc tmpalias code and unnecessary arch*relax defines * 'parisc-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: locks: remove redundant arch_*_relax operations parisc: wire up sys_utimes parisc: Remove unused CONFIG_PARISC_TMPALIAS code partly revert commit 8a10bc9: parisc/sti_console: prefer Linux fonts over built-in ROM fonts 25 March 2014, 00:36:58 UTC
56f1f4b Linus Torvalds 25 March 2014, 00:30:44 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc fixes from David Miller: 1) Do serial locking in a way that makes things clear that these are IRQ spinlocks. 2) Conversion to generic idle loop broke first generation Niagara machines, need to have %pil interrupts enabled during cpu yield hypervisor call. 3) Do not use magic constants for iterations over tsb tables, from Doug Wilson. 4) Fix erroneous truncation of 64-bit system call return values to 32-bit. From Dave Kleikamp. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Make sure %pil interrupts are enabled during hypervisor yield. sparc64:tsb.c:use array size macro rather than number sparc64: don't treat 64-bit syscall return codes as 32-bit sparc: serial: Clean up the locking for -rt 25 March 2014, 00:30:44 UTC
8a10944 Linus Torvalds 25 March 2014, 00:07:24 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) OpenVswitch's lookup_datapath() returns error pointers, so don't check against NULL. From Jiri Pirko. 2) pfkey_compile_policy() code path tries to do a GFP_KERNEL allocation under RCU locks, fix by using GFP_ATOMIC when necessary. From Nikolay Aleksandrov. 3) phy_suspend() indirectly passes uninitialized data into the ethtool get wake-on-land implementations. Fix from Sebastian Hesselbarth. 4) CPSW driver unregisters CPTS twice, fix from Benedikt Spranger. 5) If SKB allocation of reply packet fails, vxlan's arp_reduce() defers a NULL pointer. Fix from David Stevens. 6) IPV6 neigh handling in vxlan doesn't validate the destination address properly, and it builds a packet with the src and dst reversed. Fix also from David Stevens. 7) Fix spinlock recursion during subscription failures in TIPC stack, from Erik Hugne. 8) Revert buggy conversion of davinci_emac to devm_request_irq, from Chrstian Riesch. 9) Wrong flags passed into forwarding database netlink notifications, from Nicolas Dichtel. 10) The netpoll neighbour soliciation handler checks wrong ethertype, needs to be ETH_P_IPV6 rather than ETH_P_ARP. Fix from Li RongQing. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits) tipc: fix spinlock recursion bug for failed subscriptions vxlan: fix nonfunctional neigh_reduce() net: davinci_emac: Fix rollback of emac_dev_open() net: davinci_emac: Replace devm_request_irq with request_irq netpoll: fix the skb check in pkt_is_ns net: micrel : ks8851-ml: add vdd-supply support ip6mr: fix mfc notification flags ipmr: fix mfc notification flags rtnetlink: fix fdb notification flags tcp: syncookies: do not use getnstimeofday() netlink: fix setsockopt in mmap examples in documentation openvswitch: Correctly report flow used times for first 5 minutes after boot. via-rhine: Disable device in error path ATHEROS-ATL1E: Convert iounmap to pci_iounmap vxlan: fix potential NULL dereference in arp_reduce() cnic: Update version to 2.5.20 and copyright year. cnic,bnx2i,bnx2fc: Fix inconsistent use of page size cnic: Use proper ulp_ops for per device operations. net: cdc_ncm: fix control message ordering ipv6: ip6_append_data_mtu do not handle the mtu of the second fragment properly ... 25 March 2014, 00:07:24 UTC
a5d0e7c Erik Hugne 24 March 2014, 15:56:38 UTC tipc: fix spinlock recursion bug for failed subscriptions If a topology event subscription fails for any reason, such as out of memory, max number reached or because we received an invalid request the correct behavior is to terminate the subscribers connection to the topology server. This is currently broken and produces the following oops: [27.953662] tipc: Subscription rejected, illegal request [27.955329] BUG: spinlock recursion on CPU#1, kworker/u4:0/6 [27.957066] lock: 0xffff88003c67f408, .magic: dead4ead, .owner: kworker/u4:0/6, .owner_cpu: 1 [27.958054] CPU: 1 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.0-rc6+ #5 [27.960230] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [27.960874] Workqueue: tipc_rcv tipc_recv_work [tipc] [27.961430] ffff88003c67f408 ffff88003de27c18 ffffffff815c0207 ffff88003de1c050 [27.962292] ffff88003de27c38 ffffffff815beec5 ffff88003c67f408 ffffffff817f0a8a [27.963152] ffff88003de27c58 ffffffff815beeeb ffff88003c67f408 ffffffffa0013520 [27.964023] Call Trace: [27.964292] [<ffffffff815c0207>] dump_stack+0x45/0x56 [27.964874] [<ffffffff815beec5>] spin_dump+0x8c/0x91 [27.965420] [<ffffffff815beeeb>] spin_bug+0x21/0x26 [27.965995] [<ffffffff81083df6>] do_raw_spin_lock+0x116/0x140 [27.966631] [<ffffffff815c6215>] _raw_spin_lock_bh+0x15/0x20 [27.967256] [<ffffffffa0008540>] subscr_conn_shutdown_event+0x20/0xa0 [tipc] [27.968051] [<ffffffffa000fde4>] tipc_close_conn+0xa4/0xb0 [tipc] [27.968722] [<ffffffffa00101ba>] tipc_conn_terminate+0x1a/0x30 [tipc] [27.969436] [<ffffffffa00089a2>] subscr_conn_msg_event+0x1f2/0x2f0 [tipc] [27.970209] [<ffffffffa0010000>] tipc_receive_from_sock+0x90/0xf0 [tipc] [27.970972] [<ffffffffa000fa79>] tipc_recv_work+0x29/0x50 [tipc] [27.971633] [<ffffffff8105dbf5>] process_one_work+0x165/0x3e0 [27.972267] [<ffffffff8105e869>] worker_thread+0x119/0x3a0 [27.972896] [<ffffffff8105e750>] ? manage_workers.isra.25+0x2a0/0x2a0 [27.973622] [<ffffffff810648af>] kthread+0xdf/0x100 [27.974168] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0 [27.974893] [<ffffffff815ce13c>] ret_from_fork+0x7c/0xb0 [27.975466] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0 The recursion occurs when subscr_terminate tries to grab the subscriber lock, which is already taken by subscr_conn_msg_event. We fix this by checking if the request to establish a new subscription was successful, and if not we initiate termination of the subscriber after we have released the subscriber lock. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 March 2014, 19:36:56 UTC
4b29dba David Stevens 24 March 2014, 14:39:58 UTC vxlan: fix nonfunctional neigh_reduce() The VXLAN neigh_reduce() code is completely non-functional since check-in. Specific errors: 1) The original code drops all packets with a multicast destination address, even though neighbor solicitations are sent to the solicited-node address, a multicast address. The code after this check was never run. 2) The neighbor table lookup used the IPv6 header destination, which is the solicited node address, rather than the target address from the neighbor solicitation. So neighbor lookups would always fail if it got this far. Also for L3MISSes. 3) The code calls ndisc_send_na(), which does a send on the tunnel device. The context for neigh_reduce() is the transmit path, vxlan_xmit(), where the host or a bridge-attached neighbor is trying to transmit a neighbor solicitation. To respond to it, the tunnel endpoint needs to do a *receive* of the appropriate neighbor advertisement. Doing a send, would only try to send the advertisement, encapsulated, to the remote destinations in the fdb -- hosts that definitely did not do the corresponding solicitation. 4) The code uses the tunnel endpoint IPv6 forwarding flag to determine the isrouter flag in the advertisement. This has nothing to do with whether or not the target is a router, and generally won't be set since the tunnel endpoint is bridging, not routing, traffic. The patch below creates a proxy neighbor advertisement to respond to neighbor solicitions as intended, providing proper IPv6 support for neighbor reduction. Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 March 2014, 19:35:10 UTC
866b7cd David S. Miller 24 March 2014, 19:32:34 UTC Merge branch 'davinci_emac' Christian Riesch says: ==================== net: davinci_emac: Fix interrupt requests and error handling since commit 6892b41d9701283085b655c6086fb57a5d63fa47 (Linux 3.11) the davinci_emac driver is broken. After doing ifconfig down, ifconfig up, requesting the interrupts for the driver fails. The interface remains dead until the board is rebooted. The first patch in this patchset reverts commit 6892b41d9701283085b655c6086fb57a5d63fa47 partially and makes the driver useable again. During the work on the first patch, a number of bugs in the error handling of the driver's ndo_open code were found. The second patch fixes these bugs. I believe the first patch meets the rules for stable kernels, I therefore added the stable tag to this patch. The second patch is just cleanup, the code that is fixed by this patch is only executed in case of an error. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 24 March 2014, 19:32:34 UTC
cd11cf5 Christian Riesch 24 March 2014, 12:46:27 UTC net: davinci_emac: Fix rollback of emac_dev_open() If an error occurs during the initialization in emac_dev_open() (the driver's ndo_open function), interrupts, DMA descriptors etc. must be freed. The current rollback code is buggy in several ways. 1) Freeing the interrupts. The current code will not free all interrupts that were requested by the driver. Furthermore, the code tries to do a platform_get_resource(priv->pdev, IORESOURCE_IRQ, -1) in its last iteration. This patch fixes these bugs. 2) Wrong order of err: and rollback: labels. If the setup of the PHY in the code fails, the interrupts that have been requested before are not freed: request irq if requesting irqs fails, goto rollback setup phy if phy setup fails, goto err return 0 rollback: free irqs err: This patch brings the code into the correct order. 3) The code calls napi_enable() and emac_int_enable(), but does not undo both in case of an error. This patch adds calls of emac_int_disable() and napi_disable() to the rollback code. 4) RX DMA descriptors are not freed in case of an error: Right before requesting the irqs, the function creates DMA descriptors for the RX channel. These RX descriptors are never freed when we jump to either rollback or err. This patch adds code for freeing the DMA descriptors in the case of an initialization error. This required a modification of cpdma_ctrl_stop() in davinci_cpdma.c: We must be able to call this function to free the DMA descriptors while the DMA channels are in IDLE state (before cpdma_ctlr_start() was called). Tested on a custom board with the Texas Instruments AM1808. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net> 24 March 2014, 19:32:03 UTC
33b7107 Christian Riesch 24 March 2014, 12:46:26 UTC net: davinci_emac: Replace devm_request_irq with request_irq In commit 6892b41d9701283085b655c6086fb57a5d63fa47 Author: Lad, Prabhakar <prabhakar.csengg@gmail.com> Date: Tue Jun 25 21:24:51 2013 +0530 net: davinci: emac: Convert to devm_* api the call of request_irq is replaced by devm_request_irq and the call of free_irq is removed. But since interrupts are requested in emac_dev_open, doing ifconfig up/down on the board requests the interrupts again each time, causing devm_request_irq to fail. The interface is dead until the device is rebooted. This patch reverts said commit partially: It changes the driver back to use request_irq instead of devm_request_irq, puts free_irq back in place, but keeps the remaining changes of the original patch. Reported-by: Jon Ringle <jon@ringle.org> Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 24 March 2014, 19:32:03 UTC
c27f087 Li RongQing 21 March 2014, 12:53:57 UTC netpoll: fix the skb check in pkt_is_ns Neighbor Solicitation is ipv6 protocol, so we should check skb->protocol with ETH_P_IPV6 Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Cc: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 March 2014, 19:08:40 UTC
cb3042d David S. Miller 24 March 2014, 18:45:12 UTC sparc64: Make sure %pil interrupts are enabled during hypervisor yield. In arch_cpu_idle() we must enable %pil based interrupts before potentially invoking the hypervisor cpu yield call. As per the Hypervisor API documentation for cpu_yield: Interrupts which are blocked by some mechanism other that pstate.ie (for example %pil) are not guaranteed to cause a return from this service. It seems that only first generation Niagara chips are hit by this bug. My best guess is that later chips implement this in hardware and wake up anyways from %pil events, whereas in first generation chips the yield is implemented completely in hypervisor code and requires %pil to be enabled in order to wake properly from this call. Fixes: 87fa05aeb3a5 ("sparc: Use generic idle loop") Reported-by: Fabio M. Di Nitto <fabbione@fabbione.net> Reported-by: Jan Engelhardt <jengelh@inai.de> Tested-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: David S. Miller <davem@davemloft.net> 24 March 2014, 18:45:12 UTC
ebf4ad9 Nishanth Menon 21 March 2014, 06:52:48 UTC net: micrel : ks8851-ml: add vdd-supply support Few platforms use external regulator to keep the ethernet MAC supplied. So, request and enable the regulator for driver functionality. Fixes: 66fda75f47dc (regulator: core: Replace direct ops->disable usage) Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Suggested-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 24 March 2014, 04:36:47 UTC
a34fe10 Will Deacon 21 February 2014, 17:34:57 UTC parisc: locks: remove redundant arch_*_relax operations Now that the arch_{spin,read,write}_relax macros default to cpu_relax(), remove the redundant definitions for parisc. Cc: Helge Deller <deller@gmx.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Helge Deller <deller@gmx.de> 23 March 2014, 16:01:23 UTC
e9af8b7 Helge Deller 23 March 2014, 14:24:40 UTC parisc: wire up sys_utimes We seem to be nearly the only platform which does not provide the sys_utimes syscall. Adding it now makes our life much easier with userspace applications (like dietlibc and e2fsprogs) since we then behave like all other platforms too and don't need extra patches which are hard to get upstream anyway because we are not a mainstream architecture. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v3.13 23 March 2014, 15:57:13 UTC
4b02a72 John David Anglin 01 March 2014, 22:41:22 UTC parisc: Remove unused CONFIG_PARISC_TMPALIAS code The attached change removes the unused and experimental CONFIG_PARISC_TMPALIAS code. It doesn't work and I don't believe it will ever be used. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> 23 March 2014, 15:46:30 UTC
a2fb4d7 Helge Deller 23 March 2014, 15:39:52 UTC partly revert commit 8a10bc9: parisc/sti_console: prefer Linux fonts over built-in ROM fonts STI console is used on parisc and m68k HP machines. This patch partly reverts my previous commit and as such restores the fonts for the m68k machines. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v3.13 23 March 2014, 15:44:42 UTC
b37199e Al Viro 20 March 2014, 19:18:22 UTC rcuwalk: recheck mount_lock after mountpoint crossing attempts We can get false negative from __lookup_mnt() if an unrelated vfsmount gets moved. In that case legitimize_mnt() is guaranteed to fail, and we will fall back to non-RCU walk... unless we end up running into a hard error on a filesystem object we wouldn't have reached if not for that false negative. IOW, delaying that check until the end of pathname resolution is wrong - we should recheck right after we attempt to cross the mountpoint. We don't need to recheck unless we see d_mountpoint() being true - in that case even if we have just raced with mount/umount, we can simply go on as if we'd come at the moment when the sucker wasn't a mountpoint; if we run into a hard error as the result, it was a legitimate outcome. __lookup_mnt() returning NULL is different in that respect, since it might've happened due to operation on completely unrelated mountpoint. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 23 March 2014, 04:32:55 UTC
e825196 Al Viro 23 March 2014, 04:28:40 UTC make prepend_name() work correctly when called with negative *buflen In all callchains leading to prepend_name(), the value left in *buflen is eventually discarded unused if prepend_name() has returned a negative. So we are free to do what prepend() does, and subtract from *buflen *before* checking for underflow (which turns into checking the sign of subtraction result, of course). Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 23 March 2014, 04:28:40 UTC
99aea68 Eric Biggers 16 March 2014, 20:47:48 UTC vfs: Don't let __fdget_pos() get FMODE_PATH files Commit bd2a31d522344 ("get rid of fget_light()") introduced the __fdget_pos() function, which returns the resulting file pointer and fdput flags combined in an 'unsigned long'. However, it also changed the behavior to return files with FMODE_PATH set, which shouldn't happen because read(), write(), lseek(), etc. aren't allowed on such files. This commit restores the old behavior. This regression actually had no effect on read() and write() since FMODE_READ and FMODE_WRITE are not set on file descriptors opened with O_PATH, but it did cause lseek() on a file descriptor opened with O_PATH to fail with ESPIPE rather than EBADF. Signed-off-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 23 March 2014, 04:03:12 UTC
d7a15f8 Eric Biggers 16 March 2014, 19:24:08 UTC vfs: atomic f_pos access in llseek() Commit 9c225f2655e36a4 ("vfs: atomic f_pos accesses as per POSIX") changed several system calls to use fdget_pos() instead of fdget(), but missed sys_llseek(). Fix it. Signed-off-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 23 March 2014, 04:03:12 UTC
774868c Linus Torvalds 22 March 2014, 16:13:59 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two oneliner 'perf bench' tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf bench: Fix NULL pointer dereference in "perf bench all" perf bench numa: Make no args mean 'run all tests' 22 March 2014, 16:13:59 UTC
084c6c5 Linus Torvalds 22 March 2014, 16:13:13 UTC Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Only two patches this time, one to fix ethernet probe order on at91 (better fix with proper device aliasing will be done for 3.15, this is stop-gap), and one update to MAINTAINERS due to Freescale moving their repo to kernel.org" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: at91: fix network interface ordering for sama5d36 MAINTAINERS: update IMX kernel git tree 22 March 2014, 16:13:13 UTC
08edb33 Linus Torvalds 21 March 2014, 05:32:28 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Some final few intel fixes, all regressions, all stable cc, and one exynos oops fixer. The biggest is probably the intel display error irqs one, but it seems to fix a few crashes on startup, and one use after free in drm core" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/exynos: Fix (more) freeing issues in exynos_drm_drv.c drm/i915: Disable stolen memory when DMAR is active Revert "drm/i915: don't touch the VDD when disabling the panel" drm: Fix use-after-free in the shadow-attache exit code drm/i915: Don't enable display error interrupts from the start drm/i915: Fix scanline counter fixup on BDW drm/i915: Add a workaround for HSW scanline counter weirdness drm/i915: Fix PSR programming 21 March 2014, 05:32:28 UTC
708f04d Dave Jones 20 March 2014, 21:03:58 UTC block: free q->flush_rq in blk_init_allocated_queue error paths Commit 7982e90c3a57 ("block: fix q->flush_rq NULL pointer crash on dm-mpath flush") moved an allocation to blk_init_allocated_queue(), but neglected to free that allocation on the error paths that follow. Signed-off-by: Dave Jones <davej@fedoraproject.org> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 March 2014, 05:32:06 UTC
11d4616 Linus Torvalds 21 March 2014, 05:11:17 UTC futex: revert back to the explicit waiter counting code Srikar Dronamraju reports that commit b0c29f79ecea ("futexes: Avoid taking the hb->lock if there's nothing to wake up") causes java threads getting stuck on futexes when runing specjbb on a power7 numa box. The cause appears to be that the powerpc spinlocks aren't using the same ticket lock model that we use on x86 (and other) architectures, which in turn result in the "spin_is_locked()" test in hb_waiters_pending() occasionally reporting an unlocked spinlock even when there are pending waiters. So this reinstates Davidlohr Bueso's original explicit waiter counting code, which I had convinced Davidlohr to drop in favor of figuring out the pending waiters by just using the existing state of the spinlock and the wait queue. Reported-and-tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Original-code-by: Davidlohr Bueso <davidlohr@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 March 2014, 05:11:17 UTC
477cc48 Linus Torvalds 21 March 2014, 05:09:30 UTC Merge tag 'trace-fixes-v3.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull trace fix from Steven Rostedt: "Vaibhav Nagarnaik discovered that since 3.10 a clean-up patch made the array index in the trace event format bogus. He supplied an elegant solution that uses __stringify() and also removes the need for the event_storage and event_storage_mutex and also cuts off a few K of overhead from the trace events" * tag 'trace-fixes-v3.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix array size mismatch in format string 21 March 2014, 05:09:30 UTC
7e09e73 Hugh Dickins 21 March 2014, 04:52:17 UTC mm: fix swapops.h:131 bug if remap_file_pages raced migration Add remove_linear_migration_ptes_from_nonlinear(), to fix an interesting little include/linux/swapops.h:131 BUG_ON(!PageLocked) found by trinity: indicating that remove_migration_ptes() failed to find one of the migration entries that was temporarily inserted. The problem comes from remap_file_pages()'s switch from vma_interval_tree (good for inserting the migration entry) to i_mmap_nonlinear list (no good for locating it again); but can only be a problem if the remap_file_pages() range does not cover the whole of the vma (zap_pte() clears the range). remove_migration_ptes() needs a file_nonlinear method to go down the i_mmap_nonlinear list, applying linear location to look for migration entries in those vmas too, just in case there was this race. The file_nonlinear method does need rmap_walk_control.arg to do this; but it never needed vma passed in - vma comes from its own iteration. Reported-and-tested-by: Dave Jones <davej@redhat.com> Reported-and-tested-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 21 March 2014, 05:09:09 UTC
b74d3fe David S. Miller 20 March 2014, 21:29:02 UTC Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch Jesse Gross says: ==================== Open vSwitch Four small fixes for net/3.14. I realize that these are late in the cycle - just got back from vacation. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 20 March 2014, 21:29:02 UTC
f518338 Nicolas Dichtel 19 March 2014, 16:47:51 UTC ip6mr: fix mfc notification flags Commit 812e44dd1829 ("ip6mr: advertise new mfc entries via rtnl") reuses the function ip6mr_fill_mroute() to notify mfc events. But this function was used only for dump and thus was always setting the flag NLM_F_MULTI, which is wrong in case of a single notification. Libraries like libnl will wait forever for NLMSG_DONE. CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 20 March 2014, 20:24:28 UTC
65886f4 Nicolas Dichtel 19 March 2014, 16:47:50 UTC ipmr: fix mfc notification flags Commit 8cd3ac9f9b7b ("ipmr: advertise new mfc entries via rtnl") reuses the function ipmr_fill_mroute() to notify mfc events. But this function was used only for dump and thus was always setting the flag NLM_F_MULTI, which is wrong in case of a single notification. Libraries like libnl will wait forever for NLMSG_DONE. CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 20 March 2014, 20:24:28 UTC
1c104a6 Nicolas Dichtel 19 March 2014, 16:47:49 UTC rtnetlink: fix fdb notification flags Commit 3ff661c38c84 ("net: rtnetlink notify events for FDB NTF_SELF adds and deletes") reuses the function nlmsg_populate_fdb_fill() to notify fdb events. But this function was used only for dump and thus was always setting the flag NLM_F_MULTI, which is wrong in case of a single notification. Libraries like libnl will wait forever for NLMSG_DONE. CC: Thomas Graf <tgraf@suug.ch> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 20 March 2014, 20:24:28 UTC
6326231 Eric Dumazet 20 March 2014, 04:02:21 UTC tcp: syncookies: do not use getnstimeofday() While it is true that getnstimeofday() uses about 40 cycles if TSC is available, it can use 1600 cycles if hpet is the clocksource. Switch to get_jiffies_64(), as this is more than enough, and go back to 60 seconds periods. Fixes: 8c27bd75f04f ("tcp: syncookies: reduce cookie lifetime to 128 seconds") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> 20 March 2014, 20:22:42 UTC
8805004 stephen hemminger 20 March 2014, 04:54:20 UTC netlink: fix setsockopt in mmap examples in documentation The documentation for how to use netlink mmap interface is incorrect. The calls to setsockopt() require an additional argument. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net> 20 March 2014, 18:11:38 UTC
3fb725c Linus Torvalds 20 March 2014, 17:57:52 UTC Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "Another set of five fixes. The most interesting one is a fix for race condition in the local_irq_disable() implementation used by .S code for pre-MIPS R2 processors only. It leaves a race that's hard but not impossible to hit; the others fairly obvious" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Make local_irq_disable macro safe for non-Mipsr2 MIPS: Octeon: Fix warning in of_device_alloc on cn3xxx MIPS: ftrace: Tweak safe_load()/safe_store() macros MIPS: BCM47XX: Check all (32) GPIOs when looking for a pin MIPS: Fix possible build error with transparent hugepages enabled 20 March 2014, 17:57:52 UTC
92f9973 Linus Torvalds 20 March 2014, 17:56:37 UTC Merge tag 'sound-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just two minor bug fixes: a fix for a regression in oxygen driver that was introduced in 3.14-rc1, and a stable fix for the return value of compress offload open callback" * tag 'sound-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: compress: Pass through return value of open ops callback ALSA: oxygen: Xonar DG(X): fix Stereo Upmixing regression 20 March 2014, 17:56:37 UTC
f9b8c4c Ben Pfaff 20 March 2014, 17:45:21 UTC openvswitch: Correctly report flow used times for first 5 minutes after boot. The kernel starts out its "jiffies" timer as 5 minutes below zero, as shown in include/linux/jiffies.h: /* * Have the 32 bit jiffies value wrap 5 minutes after boot * so jiffies wrap bugs show up earlier. */ #define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ)) The loop in ovs_flow_stats_get() starts out with 'used' set to 0, then takes any "later" time. This means that for the first five minutes after boot, flows will always be reported as never used, since 0 is greater than any time already seen. Signed-off-by: Ben Pfaff <blp@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> 20 March 2014, 17:45:21 UTC
8729134 Vaibhav Nagarnaik 14 February 2014, 03:51:48 UTC tracing: Fix array size mismatch in format string In event format strings, the array size is reported in two locations. One in array subscript and then via the "size:" attribute. The values reported there have a mismatch. For e.g., in sched:sched_switch the prev_comm and next_comm character arrays have subscript values as [32] where as the actual field size is 16. name: sched_switch ID: 301 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1;signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[32]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[32]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; After bisection, the following commit was blamed: 92edca0 tracing: Use direct field, type and system names This commit removes the duplication of strings for field->name and field->type assuming that all the strings passed in __trace_define_field() are immutable. This is not true for arrays, where the type string is created in event_storage variable and field->type for all array fields points to event_storage. Use __stringify() to create a string constant for the type string. Also, get rid of event_storage and event_storage_mutex that are not needed anymore. also, an added benefit is that this reduces the overhead of events a bit more: text data bss dec hex filename 8424787 2036472 1302528 11763787 b3804b vmlinux 8420814 2036408 1302528 11759750 b37086 vmlinux.patched Link: http://lkml.kernel.org/r/1392349908-29685-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 20 March 2014, 17:21:05 UTC
71ca758 Jim Quinlan 27 November 2013, 20:34:50 UTC MIPS: Make local_irq_disable macro safe for non-Mipsr2 For non-mipsr2 processors, the local_irq_disable contains an mfc0-mtc0 pair with instructions inbetween. With preemption enabled, this sequence may get preempted and effect a stale value of CP0_STATUS when executing the mtc0 instruction. This commit avoids this scenario by incrementing the preempt count before the mfc0 and decrementing it after the mtc9. [ralf@linux-mips.org: This patch is sorting out the part that were missed by e97c5b6098 [MIPS: Make irqflags.h functions preempt-safe for non-mipsr2 cpus.] I also re-enabled the inclusion of <asm/asm-offsets.h> at the top of <asm/asmmacro.h>]. Signed-off-by: Jim Quinlan <jim2101024@gmail.com> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/6164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 20 March 2014, 12:46:15 UTC
004e5cf Dave Airlie 20 March 2014, 03:20:00 UTC Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Just fixed resource release issue at open fail. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: Fix (more) freeing issues in exynos_drm_drv.c 20 March 2014, 03:20:00 UTC
85d898b Daniel Kurtz 17 March 2014, 03:28:06 UTC drm/exynos: Fix (more) freeing issues in exynos_drm_drv.c The following commit [0] fixed a use-after-free, but left the subdrv open in the error path. [0] commit 6ca605f7c70895a35737435f17ae9cc5e36f1466 drm/exynos: Fix freeing issues in exynos_drm_drv.c Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> 20 March 2014, 02:42:24 UTC
8878439 Hugh Dickins 19 March 2014, 00:38:38 UTC mm: fix bad rss-counter if remap_file_pages raced migration Fix some "Bad rss-counter state" reports on exit, arising from the interaction between page migration and remap_file_pages(): zap_pte() must count a migration entry when zapping it. And yes, it is possible (though very unusual) to find an anon page or swap entry in a VM_SHARED nonlinear mapping: coming from that horrid get_user_pages(write, force) case which COWs even in a shared mapping. Signed-off-by: Hugh Dickins <hughd@google.com> Tested-by: Sasha Levin sasha.levin@oracle.com> Tested-by: Dave Jones davej@redhat.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 March 2014, 23:21:49 UTC
7c1cfac Linus Torvalds 19 March 2014, 23:15:54 UTC Merge tag 'pci-v3.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI resource management fix from Bjorn Helgaas: "This is a fix for an AGP regression exposed by e501b3d87f00 ("agp: Support 64-bit APBASE"), which we merged in v3.14-rc1. We've warned about the conflict between the GART and PCI resources and cleared out the PCI resource for a long time, but after e501b3d87f00, we still *use* that cleared-out PCI resource. I think the GART resource is incorrect, so this patch removes it" * tag 'pci-v3.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "[PATCH] Insert GART region into resource map" 19 March 2014, 23:15:54 UTC
7c38953 Linus Torvalds 19 March 2014, 23:13:40 UTC Merge branch 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "One really late cgroup patch to fix error path in create_css(). Hitting this bug would be pretty rare but still possible and it gets delayed we'd need to backport it through -stable anyway. It only updates error path in create_css() and has low chance of new breakages" * 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix a failure path in create_css() 19 March 2014, 23:13:40 UTC
2eddb70 Andreas Herrmann 19 March 2014, 22:03:30 UTC MIPS: Octeon: Fix warning in of_device_alloc on cn3xxx Starting with commit 3da5278727a895d49a601f67fd49dffa0b80f9a5 (of/irq: Rework of_irq_count()) the following warning is triggered on octeon cn3xxx: [ 0.887281] WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x228/0x230() [ 0.895642] Modules linked in: [ 0.898689] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc7-00012-g9ae51f2-dirty #41 [ 0.906860] Stack : c8b439581166d96e ffffffff816b0000 0000000040808000 ffffffff81185ddc [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 000000000000000b [ 0.906860] 000000000000000a 000000000000000a 0000000000000000 0000000000000000 [ 0.906860] ffffffff81740000 ffffffff81720000 ffffffff81615900 ffffffff816b0177 [ 0.906860] ffffffff81727d10 800000041f868fb0 0000000000000001 0000000000000000 [ 0.906860] 0000000000000000 0000000000000038 0000000000000001 ffffffff81568484 [ 0.906860] 800000041f86faa8 ffffffff81145ddc 0000000000000000 ffffffff811873f4 [ 0.906860] 800000041f868b88 800000041f86f9c0 0000000000000000 ffffffff81569c9c [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 0.906860] 0000000000000000 ffffffff811205e0 0000000000000000 0000000000000000 [ 0.906860] ... [ 0.971695] Call Trace: [ 0.974139] [<ffffffff811205e0>] show_stack+0x68/0x80 [ 0.979183] [<ffffffff81569c9c>] dump_stack+0x8c/0xe0 [ 0.984196] [<ffffffff81145efc>] warn_slowpath_common+0x84/0xb8 [ 0.990110] [<ffffffff81436888>] of_device_alloc+0x228/0x230 [ 0.995726] [<ffffffff814368d8>] of_platform_device_create_pdata+0x48/0xd0 [ 1.002593] [<ffffffff81436a94>] of_platform_bus_create+0x134/0x1e8 [ 1.008837] [<ffffffff81436af8>] of_platform_bus_create+0x198/0x1e8 [ 1.015064] [<ffffffff81436cc4>] of_platform_bus_probe+0xa4/0x100 [ 1.021149] [<ffffffff81100570>] do_one_initcall+0xd8/0x128 [ 1.026701] [<ffffffff816e2a10>] kernel_init_freeable+0x144/0x210 [ 1.032753] [<ffffffff81564bc4>] kernel_init+0x14/0x110 [ 1.037973] [<ffffffff8111bb44>] ret_from_kernel_thread+0x14/0x1c With this commit the kernel starts mapping the interrupts listed for gpio-controller node. irq_domain_ops for CIU (octeon_irq_ciu_map and octeon_irq_ciu_xlat) refuse to handle the GPIO lines (returning -EINVAL) and this is causing above warning in of_device_alloc(). Modify irq_domain_ops for CIU and CIU2 to "gracefully handle" GPIO lines (neither return error code nor call octeon_irq_set_ciu_mapping for it). This should avoid the warning. (As before the real setup for GPIO lines will happen using irq_domain_ops of gpio-controller.) This patch is based on Wei's patch v2 (see http://marc.info/?l=linux-mips&m=139511814813247). Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Reported-by: Yang Wei <wei.yang@windriver.com> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6624/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 19 March 2014, 22:50:30 UTC
b08ac66 Viller Hsiao 18 March 2014, 07:39:34 UTC MIPS: ftrace: Tweak safe_load()/safe_store() macros Due to name collision in ftrace safe_load and safe_store macros, these macros cannot take expressions as operands. For example, compiler will complain for a macro call like the following: safe_store_code(new_code2, ip + 4, faulted); arch/mips/include/asm/ftrace.h:61:6: note: in definition of macro 'safe_store' : [dst] "r" (dst), [src] "r" (src)\ ^ arch/mips/kernel/ftrace.c:118:2: note: in expansion of macro 'safe_store_code' safe_store_code(new_code2, ip + 4, faulted); ^ arch/mips/kernel/ftrace.c:118:32: error: undefined named operand 'ip + 4' safe_store_code(new_code2, ip + 4, faulted); ^ arch/mips/include/asm/ftrace.h:61:6: note: in definition of macro 'safe_store' : [dst] "r" (dst), [src] "r" (src)\ ^ arch/mips/kernel/ftrace.c:118:2: note: in expansion of macro 'safe_store_code' safe_store_code(new_code2, ip + 4, faulted); ^ This build error is triggered by a4671094 [MIPS: ftrace: Fix icache flush range error]. Tweak variable naming in those macros to allow flexible operands. Signed-off-by: Viller Hsiao <villerhsiao@gmail.com> Cc: linux-mips@linux-mips.org Cc: rostedt@goodmis.org Cc: fweisbec@gmail.com Cc: mingo@redhat.com Cc: Qais.Yousef@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/6622/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 19 March 2014, 22:18:40 UTC
55ae26b Dave Airlie 19 March 2014, 21:17:31 UTC Merge tag 'drm-intel-fixes-2014-03-19' of git://anongit.freedesktop.org/drm-intel into drm-fixes two more fixes, both regressions. * tag 'drm-intel-fixes-2014-03-19' of git://anongit.freedesktop.org/drm-intel: drm/i915: Disable stolen memory when DMAR is active Revert "drm/i915: don't touch the VDD when disabling the panel" 19 March 2014, 21:17:31 UTC
ae99615 Roger Luethi 18 March 2014, 17:14:01 UTC via-rhine: Disable device in error path Currently, via-rhine fails to call pci_disable_device() for errors in rhine_init_one(). Reported-by: Huqiu Liu <liuhq11@mails.tsinghua.edu.cn> Signed-off-by: Roger Luethi <rl@hellgate.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 19 March 2014, 20:08:29 UTC
ea1cd65 Linus Torvalds 19 March 2014, 16:05:38 UTC Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single bugfix: make the scheduler clock on Vybrid SoCs count forward" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: vf_pit_timer: use complement for sched_clock reading 19 March 2014, 16:05:38 UTC
749d322 Charles Keepax 19 March 2014, 12:59:39 UTC ALSA: compress: Pass through return value of open ops callback The snd_compr_open function would always return 0 even if the compressed ops open function failed, obviously this is incorrect. Looks like this was introduced by a small typo in: commit a0830dbd4e42b38aefdf3fb61ba5019a1a99ea85 ALSA: Add a reference counter to card instance This patch returns the value from the compressed op as it should. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 19 March 2014, 14:46:24 UTC
4fe2169 Rafał Miłecki 13 February 2014, 16:48:12 UTC MIPS: BCM47XX: Check all (32) GPIOs when looking for a pin Broadcom boards support 32 GPIOs and NVRAM may have entires for higher ones too. Example: gpio23=wombo_reset Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: Rafał Miłecki <zajec5@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6547/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 19 March 2014, 08:28:10 UTC
0f4706d Chris Wilson 18 March 2014, 12:50:50 UTC drm/i915: Disable stolen memory when DMAR is active We have reports of heavy screen corruption if we try to use the stolen memory reserved by the BIOS whilst the DMA-Remapper is active. This quirk may be only specific to a few machines or BIOSes, but first lets apply the big hammer and always disable use of stolen memory when DMAR is active. v2 by Jani: Rebase on -fixes, only look at intel_iommu_gfx_mapped. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68535 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> 19 March 2014, 08:05:38 UTC
8259383 Jani Nikula 17 March 2014, 13:20:59 UTC Revert "drm/i915: don't touch the VDD when disabling the panel" This reverts commit dff392dbd258381a6c3164f38420593f2d291e3b Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Dec 6 17:32:41 2013 -0200 drm/i915: don't touch the VDD when disabling the panel which didn't take into account commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel and commit 35a38556d900b9cb5dfa2529c93944b847f8a8a4 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Aug 12 22:17:14 2012 +0200 drm/i915: reorder edp disabling to fix ivb MacBook Air Unsurprisingly, various MacBooks failed. Effectively the same has already been done in drm-intel-next-queued. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74628 Tested-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> 19 March 2014, 08:03:57 UTC
3eb59ec Li Zefan 18 March 2014, 09:02:36 UTC cgroup: fix a failure path in create_css() If online_css() fails, we should remove cgroup files belonging to css->ss. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> 18 March 2014, 21:15:36 UTC
707d4ee Bjorn Helgaas 18 March 2014, 20:26:12 UTC Revert "[PATCH] Insert GART region into resource map" This reverts commit 56dd669a138c, which makes the GART visible in /proc/iomem. This fixes a regression: e501b3d87f00 ("agp: Support 64-bit APBASE") exposed an existing problem with a conflict between the GART region and a PCI BAR region. The GART addresses are bus addresses, not CPU addresses, and therefore should not be inserted in iomem_resource. On many machines, the GART region is addressable by the CPU as well as by an AGP master, but CPU addressability is not required by the spec. On some of these machines, the GART is mapped by a PCI BAR, and in that case, the PCI core automatically inserts it into iomem_resource, just as it does for all BARs. Inserting it here means we'll have a conflict if the PCI core later tries to claim the GART region, so let's drop the insertion here. The conflict indirectly causes X failures, as reported by Jouni in the bugzilla below. We detected the conflict even before e501b3d87f00, but after it the AGP code (fix_northbridge()) uses the PCI resource (which is zeroed because of the conflict) instead of reading the BAR again. Conflicts: arch/x86_64/kernel/aperture.c Fixes: e501b3d87f00 agp: Support 64-bit APBASE Link: https://bugzilla.kernel.org/show_bug.cgi?id=72201 Reported-and-tested-by: Jouni Mettälä <jtmettala@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 18 March 2014, 20:26:12 UTC
3e3d354 Peter Senna Tschudin 18 March 2014, 16:11:24 UTC ATHEROS-ATL1E: Convert iounmap to pci_iounmap Use pci_iounmap instead of iounmap when the virtual mapping was done with pci_iomap. A simplified version of the semantic patch that finds this issue is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression addr; @@ addr = pci_iomap(...) @rr@ expression r.addr; @@ * iounmap(addr) // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 20:12:56 UTC
7346135 David Stevens 18 March 2014, 16:32:29 UTC vxlan: fix potential NULL dereference in arp_reduce() This patch fixes a NULL pointer dereference in the event of an skb allocation failure in arp_reduce(). Signed-Off-By: David L Stevens <dlstevens@us.ibm.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 20:09:34 UTC
0df04c4 David S. Miller 18 March 2014, 20:03:44 UTC Merge branch 'cnic-net' Michael Chan says: ==================== cnic bug fixes for net-next Michael Chan (3): cnic: Use proper ulp_ops for per device operations. cnic,bnx2i,bnx2fc: Fix inconsistent use of page size cnic: Update version to 2.5.20 and copyright year. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 20:03:44 UTC
c366128 Michael Chan 18 March 2014, 03:19:08 UTC cnic: Update version to 2.5.20 and copyright year. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 20:02:16 UTC
be1fefc Michael Chan 18 March 2014, 03:19:07 UTC cnic,bnx2i,bnx2fc: Fix inconsistent use of page size The bnx2/bnx2x rings are made up of linked pages. However there is an upper limit on the page size as some the page size settings are 16-bit in the hardware/firmware interface. In the current code, some parts use BNX2_PAGE_SIZE which has a 16K upper limit and some parts use PAGE_SIZE. On archs with >= 64K PAGE_SIZE, it generates some compile warnings. Define a new CNIC_PAGE_SZIE which has an upper limit of 16K and use it consistently in all relevant parts. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 20:02:16 UTC
f7bd12d Michael Chan 18 March 2014, 03:19:06 UTC cnic: Use proper ulp_ops for per device operations. For per device operations, cnic needs to dereference the RCU protected cp->ulp_ops instead of the global cnic_ulp_tbl. In 2 locations, cnic_send_nlmsg() and cnic_copy_ulp_stats(), it was referencing the global table. If the device has been unregistered and these functions are still being called (very unlikely scenarios), it could lead to NULL pointer dereference. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 20:02:16 UTC
ff0992e Bjørn Mork 17 March 2014, 15:25:18 UTC net: cdc_ncm: fix control message ordering This is a context modified revert of commit 6a9612e2cb22 ("net: cdc_ncm: remove ncm_parm field") which introduced a NCM specification violation, causing setup errors for some devices. These errors resulted in the device and host disagreeing about shared settings, with complete failure to communicate as the end result. The NCM specification require that many of the NCM specific control reuests are sent only while the NCM Data Interface is in alternate setting 0. Reverting the commit ensures that we follow this requirement. Fixes: 6a9612e2cb22 ("net: cdc_ncm: remove ncm_parm field") Reported-and-tested-by: Pasi Kärkkäinen <pasik@iki.fi> Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 19:32:32 UTC
e367c2d lucien 17 March 2014, 04:51:01 UTC ipv6: ip6_append_data_mtu do not handle the mtu of the second fragment properly In ip6_append_data_mtu(), when the xfrm mode is not tunnel(such as transport),the ipsec header need to be added in the first fragment, so the mtu will decrease to reserve space for it, then the second fragment come, the mtu should be turn back, as the commit 0c1833797a5a6ec23ea9261d979aa18078720b74 said. however, in the commit a493e60ac4bbe2e977e7129d6d8cbb0dd236be, it use *mtu = min(*mtu, ...) to change the mtu, which lead to the new mtu is alway equal with the first fragment's. and cannot turn back. when I test through ping6 -c1 -s5000 $ip (mtu=1280): ...frag (0|1232) ESP(spi=0x00002000,seq=0xb), length 1232 ...frag (1232|1216) ...frag (2448|1216) ...frag (3664|1216) ...frag (4880|164) which should be: ...frag (0|1232) ESP(spi=0x00001000,seq=0x1), length 1232 ...frag (1232|1232) ...frag (2464|1232) ...frag (3696|1232) ...frag (4928|116) so delete the min() when change back the mtu. Signed-off-by: Xin Long <lucien.xin@gmail.com> Fixes: 75a493e60ac4bb ("ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size") Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 19:17:53 UTC
d1958f8 Paul Bolle 16 March 2014, 17:44:21 UTC isdn/capi: Make Middleware depend on CAPI2.0 The Kconfig symbol ISDN_CAPI_MIDDLEWARE is only used in capi.c. Setting it without setting ISDN_CAPI_CAPI20 is therefor useless. Make it depend on ISDN_CAPI_CAPI20 and put its entry after ISDN_CAPI_CAPI20's entry. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 19:02:57 UTC
4907cdc Linus Torvalds 18 March 2014, 18:32:08 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull another kvm fix from Paolo Bonzini: "A fix for a PowerPC bug that was introduced during the 3.14 merge window" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Fix register usage when loading/saving VRSAVE KVM: PPC: Book3S HV: Remove bogus duplicate code 18 March 2014, 18:32:08 UTC
72c2dfd David S. Miller 18 March 2014, 16:42:33 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== 1) Fix a sleep in atomic when pfkey_sadb2xfrm_user_sec_ctx() is called from pfkey_compile_policy(). Fix from Nikolay Aleksandrov. 2) security_xfrm_policy_alloc() can be called in process and atomic context. Add an argument to let the callers choose the appropriate way. Fix from Nikolay Aleksandrov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 16:42:33 UTC
3055644 Clemens Ladisch 18 March 2014, 08:31:18 UTC ALSA: oxygen: Xonar DG(X): fix Stereo Upmixing regression The code introduced in commit 1f91ecc14dee ("ALSA: oxygen: modify adjust_dg_dac_routing function") accidentally disregarded the old value of the playback routing register, so it broke the "Stereo Upmixing" mixer control. The unmuted parts of the channel routing are the same for all settings of the output destination, so it suffices to revert that part of the patch. Fixes: 1f91ecc14dee ('ALSA: oxygen: modify adjust_dg_dac_routing function') Tested-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 18 March 2014, 08:51:58 UTC
7c144bf Ingo Molnar 18 March 2014, 08:21:42 UTC Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull two 'perf bench' fixes from Arnaldo: * Make 'perf bench mem' (i.e. no args) mean 'run all tests' so that we can run all tests, not stopping at the numa ones. (Arnaldo Carvalho de Melo) * Fix NULL pointer dereference after last test in in "perf bench all" (Patrick Palka) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> 18 March 2014, 08:21:42 UTC
e4362d1 Alex Smith 21 January 2014, 11:22:35 UTC MIPS: Fix possible build error with transparent hugepages enabled If CONFIG_TRANSPARENT_HUGEPAGE is enabled, but CONFIG_HUGETLB_PAGE is not, it is possible to end up with a configuration that fails to build with the following error: include/linux/huge_mm.h:125:2: error: #error "hugepages can't be allocated by the buddy allocator" This is due to CONFIG_FORCE_MAX_ZONEORDER defaulting to 11. It already has ranges that change the valid values when HUGETLB_PAGE is enabled, but this is not done for TRANSPARENT_HUGEPAGE. Fix by changing the HUGETLB_PAGE dependencies to MIPS_HUGE_TLB_SUPPORT, which includes both TRANSPARENT_HUGEPAGE and HUGETLB_PAGE. Signed-off-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6391/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 18 March 2014, 07:18:11 UTC
27410e8 Daniel Vetter 30 January 2014, 16:58:38 UTC drm: Fix use-after-free in the shadow-attache exit code This regression has been introduced in commit b3f2333de8e81b089262b26d52272911523e605f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Dec 11 11:34:31 2013 +0100 drm: restrict the device list for shadow attached drivers Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 18 March 2014, 03:09:03 UTC
2182127 Dave Airlie 18 March 2014, 03:06:17 UTC Merge tag 'drm-intel-fixes-2014-03-17' of git://anongit.freedesktop.org/drm-intel into drm-fixes Two 3.14 specific fixes, two cc: stable. * tag 'drm-intel-fixes-2014-03-17' of git://anongit.freedesktop.org/drm-intel: drm/i915: Don't enable display error interrupts from the start drm/i915: Fix scanline counter fixup on BDW drm/i915: Add a workaround for HSW scanline counter weirdness drm/i915: Fix PSR programming 18 March 2014, 03:06:17 UTC
b085f31 Benedikt Spranger 16 March 2014, 15:36:29 UTC net: cpsw: do not register cpts twice commit f280e89a (drivers: net: cpsw: fix for cpsw crash when build as modules) moved cpts_register()/cpts_unregister() to ndo_open()/ndo_stop(), but failed to remove cpts_register in cpsw_probe() which leads to a double registration and the following debug object splat. [ 18.991902] ODEBUG: init active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x2c [ 19.082249] [<c0059e80>] (init_timer_key) from [<c04965d4>] (cpts_register+0x1f0/0x2c4) [ 19.090642] [<c04965d4>] (cpts_register) from [<c04931dc>] (cpsw_ndo_open+0x780/0x81c) [ 19.098948] [<c04931dc>] (cpsw_ndo_open) from [<c0599c2c>] (__dev_open+0xb4/0x118) Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> 18 March 2014, 02:17:32 UTC
9a15c94 Linus Torvalds 17 March 2014, 23:54:49 UTC Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull final final block IO fixes from Jens Axboe: "Yes, the last round was final. This one is final final. The mtip32xx fix could have waited, but it's so simple and gets rid of two warning spewages on load. The two block flush fixes are critical for blk-mq, and are the primary reason for this late pull request" * 'for-linus' of git://git.kernel.dk/linux-block: mtip32xx: fix bad use of smp_processor_id() block: change flush sequence list addition back to front add block: fix q->flush_rq NULL pointer crash on dm-mpath flush 17 March 2014, 23:54:49 UTC
8a21d9f Linus Torvalds 17 March 2014, 23:53:18 UTC Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "A fair number of fixes all across arch/mips. Nothing really stands out though APRP, the FPU code and syscall tracing code received multiple patches those all were small" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: mark O32+FP64 experimental for now MIPS: ftrace: Fix icache flush range error MIPS: Fix syscall tracing interface MIPS: asm: syscall: Fix copying system call arguments MIPS: Octeon: Fix fall through on bar type OCTEON_DMA_BAR_TYPE_SMALL MIPS: FPU: Fix conflict of register usage MIPS: Replace CONFIG_MIPS64 and CONFIG_MIPS32_R2 MIPS: math-emu: Fix prefx detection and COP1X function field definition MIPS: APRP: Choose the correct VPE loader by fixing the linking MIPS: APRP: Unregister rtlx interrupt hook at module exit MIPS: APRP: Fix the linking of rtlx interrupt hook MIPS: bcm47xx: Include missing errno.h for ENXIO MIPS: Alchemy: Fix unchecked kstrtoul return value MIPS: Fix randconfig build error. 17 March 2014, 23:53:18 UTC
8d7f1fb Peter Senna Tschudin 15 March 2014, 23:30:52 UTC ATHEROS-ALX: Use dma_set_mask_and_coherent and fix a bug 1. For the 64 bits dma mask use dma_set_mask_and_coherent instead of dma_set_mask and dma_set_coherent_mask. 2. For the 32 bits dma mask dma_set_coherent_mask is only called if dma_set_mask fails, which is unusual. Assuming this as a bug, fixes it by replacing calls to dma_set_mask and dma_set_coherent_mask by a call to dma_set_mask_and_coherent. Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Tested-by: Jonas Hahnfeld <hahnjo@hahnjo.de> Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2014, 21:19:45 UTC
151b628 Doug Wilson 07 March 2014, 10:59:03 UTC sparc64:tsb.c:use array size macro rather than number This is a small patch which uses ARRAY_SIZE macro rather than a number to make code readability better. Signed-off-by: Doug Wilson <doug.lkml@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2014, 19:55:49 UTC
1535bd8 Dave Kleikamp 14 March 2014, 15:42:01 UTC sparc64: don't treat 64-bit syscall return codes as 32-bit When checking a system call return code for an error, linux_sparc_syscall was sign-extending the lower 32-bit value and comparing it to -ERESTART_RESTARTBLOCK. lseek can return valid return codes whose lower 32-bits alone would indicate a failure (such as 4G-1). Use the whole 64-bit value to check for errors. Only the 32-bit path should sign extend the lower 32-bit value. Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Acked-by: Bob Picco <bob.picco@oracle.com> Acked-by: Allen Pais <allen.pais@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> 17 March 2014, 19:54:52 UTC
back to top