Skip to main content

Browse the archive

https://github.com/torvalds/linux
27 March 2024, 02:37:15 UTC
sort by:
Revision Author Date Message Commit Date
bb7da33 Florian Fainelli 04 January 2017, 00:34:48 UTC net: systemport: Utilize skb_put_padto() Since we need to pad our packets, utilize skb_put_padto() which increases skb->len by how much we need to pad, allowing us to eliminate the test on skb->len right below. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 January 2017, 18:33:28 UTC
cd7aeb1 Nicolas Pitre 03 January 2017, 18:57:00 UTC LiquidIO VF: s/select/imply/ for PTP_1588_CLOCK Fix a minor fallout from the merge of the timers and the networking trees. The following error may result if the PTP_1588_CLOCK prerequisites are not available: drivers/built-in.o: In function `ptp_clock_unregister': (.text+0x40e0a5): undefined reference to `pps_unregister_source' drivers/built-in.o: In function `ptp_clock_unregister': (.text+0x40e0cc): undefined reference to `posix_clock_unregister' drivers/built-in.o: In function `ptp_clock_event': (.text+0x40e249): undefined reference to `pps_event' drivers/built-in.o: In function `ptp_clock_register': (.text+0x40e5e1): undefined reference to `pps_register_source' drivers/built-in.o: In function `ptp_clock_register': (.text+0x40e62c): undefined reference to `posix_clock_register' drivers/built-in.o: In function `ptp_clock_register': (.text+0x40e68d): undefined reference to `pps_unregister_source' Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 January 2017, 18:27:16 UTC
a9a8cdb Varun Prakash 03 January 2017, 15:55:48 UTC libcxgb: fix error check for ip6_route_output() ip6_route_output() never returns NULL so check dst->error instead of !dst. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 January 2017, 18:25:53 UTC
63dfb0d Peter Chen 03 January 2017, 09:22:20 UTC net: usb: asix_devices: add .reset_resume for USB PM The USB core may call reset_resume when it fails to resume asix device. And USB core can recovery this abnormal resume at low level driver, the same .resume at asix driver can work too. Add .reset_resume can avoid disconnecting after backing from system resume, and NFS can still be mounted after this commit. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 January 2017, 18:03:08 UTC
926d93a David Ahern 03 January 2017, 17:37:55 UTC net: vrf: Add missing Rx counters The move from rx-handler to L3 receive handler inadvertantly dropped the rx counters. Restore them. Fixes: 74b20582ac38 ("net: l3mdev: Add hook in ip and ipv6") Reported-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 January 2017, 23:51:40 UTC
3b48ab2 Reiter Wolfgang 03 January 2017, 00:39:10 UTC drop_monitor: consider inserted data in genlmsg_end Final nlmsg_len field update must reflect inserted net_dm_drop_point data. This patch depends on previous patch: "drop_monitor: add missing call to genlmsg_end" Signed-off-by: Reiter Wolfgang <wr0112358@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 January 2017, 16:09:44 UTC
096de2f Sabrina Dubroca 03 January 2017, 15:26:04 UTC benet: stricter vxlan offloading check in be_features_check When VXLAN offloading is enabled, be_features_check() tries to check if an encapsulated packet is indeed a VXLAN packet. The check is not strict enough, and considers any UDP-encapsulated ethernet frame with a 8-byte tunnel header as being VXLAN. Unfortunately, both GENEVE and VXLAN-GPE have a 8-byte header, so they get through this check. Force the UDP destination port to be the one that has been offloaded to hardware. Without this, GENEVE-encapsulated packets can end up having an incorrect checksum when both a GENEVE and a VXLAN (offloaded) tunnel are configured. This is similar to commit a547224dceed ("mlx4e: Do not attempt to offload VXLAN ports that are unrecognized"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> 03 January 2017, 15:58:43 UTC
5350d54 Alexander Duyck 02 January 2017, 21:32:54 UTC ipv4: Do not allow MAIN to be alias for new LOCAL w/ custom rules In the case of custom rules being present we need to handle the case of the LOCAL table being intialized after the new rule has been added. To address that I am adding a new check so that we can make certain we don't use an alias of MAIN for LOCAL when allocating a new table. Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") Reported-by: Oliver Brunel <jjk@jjacky.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 January 2017, 14:38:34 UTC
515028f Bartosz Folta 02 January 2017, 12:41:50 UTC net: macb: Updated resource allocation function calls to new version of API. Changed function calls of resource allocation to new API. Changed way of setting DMA mask. Removed unnecessary sanity check. This patch is sent in regard to recently applied patch Commit 83a77e9ec4150ee4acc635638f7dedd9da523a26 net: macb: Added PCI wrapper for Platform Driver. Signed-off-by: Bartosz Folta <bfolta@cadence.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 January 2017, 14:35:42 UTC
a2962b0 David S. Miller 03 January 2017, 14:33:00 UTC Merge branch 'dwmac-oxnas-leaks' Johan Hovold says: ==================== net: stmmac: dwmac-oxnas: fix leaks and simplify pm These patches fixes of-node and fixed-phydev leaks in the recently added dwmac-oxnas driver, and ultimately switches over to using the generic pm implementation as the required callbacks are now in place. Note that this series has only been compile tested. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 03 January 2017, 14:33:00 UTC
a8de4d7 Johan Hovold 02 January 2017, 11:56:04 UTC net: stmmac: dwmac-oxnas: use generic pm implementation Now that we have an exit callback in place, add init as well and get rid of the custom PM callbacks in favour of the generic ones. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 03 January 2017, 14:33:00 UTC
6b4c212 Johan Hovold 02 January 2017, 11:56:03 UTC net: stmmac: dwmac-oxnas: fix fixed-link-phydev leaks Make sure to deregister and free any fixed-link phy registered during probe on probe errors and on driver unbind by calling the new glue helper function. For driver unbind, use the generic stmmac-platform remove implementation and add an exit callback to disable the clock. Fixes: 5ed7414062e7 ("net: stmmac: Add OXNAS Glue Driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 03 January 2017, 14:33:00 UTC
8f87e62 Johan Hovold 02 January 2017, 11:56:02 UTC net: stmmac: dwmac-oxnas: fix of-node leak Use the syscon lookup-by-phandle helper so that the reference taken by of_parse_phandle() is released when done with the node. Fixes: 5ed7414062e7 ("net: stmmac: Add OXNAS Glue Driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 03 January 2017, 14:33:00 UTC
4e5da36 Alexander Alemayhu 02 January 2017, 17:52:24 UTC Documentation/networking: fix typo in mpls-sysctl s/utliziation/utilization Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 January 2017, 20:49:08 UTC
7ababb7 Michal Tesar 02 January 2017, 13:38:36 UTC igmp: Make igmp group member RFC 3376 compliant 5.2. Action on Reception of a Query When a system receives a Query, it does not respond immediately. Instead, it delays its response by a random amount of time, bounded by the Max Resp Time value derived from the Max Resp Code in the received Query message. A system may receive a variety of Queries on different interfaces and of different kinds (e.g., General Queries, Group-Specific Queries, and Group-and-Source-Specific Queries), each of which may require its own delayed response. Before scheduling a response to a Query, the system must first consider previously scheduled pending responses and in many cases schedule a combined response. Therefore, the system must be able to maintain the following state: o A timer per interface for scheduling responses to General Queries. o A per-group and interface timer for scheduling responses to Group- Specific and Group-and-Source-Specific Queries. o A per-group and interface list of sources to be reported in the response to a Group-and-Source-Specific Query. When a new Query with the Router-Alert option arrives on an interface, provided the system has state to report, a delay for a response is randomly selected in the range (0, [Max Resp Time]) where Max Resp Time is derived from Max Resp Code in the received Query message. The following rules are then used to determine if a Report needs to be scheduled and the type of Report to schedule. The rules are considered in order and only the first matching rule is applied. 1. If there is a pending response to a previous General Query scheduled sooner than the selected delay, no additional response needs to be scheduled. 2. If the received Query is a General Query, the interface timer is used to schedule a response to the General Query after the selected delay. Any previously pending response to a General Query is canceled. --8<-- Currently the timer is rearmed with new random expiration time for every incoming query regardless of possibly already pending report. Which is not aligned with the above RFE. It also might happen that higher rate of incoming queries can postpone the report after the expiration time of the first query causing group membership loss. Now the per interface general query timer is rearmed only when there is no pending report already scheduled on that interface or the newly selected expiration time is before the already pending scheduled report. Signed-off-by: Michal Tesar <mtesar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 January 2017, 18:01:03 UTC
d0af683 Ian Kumlien 02 January 2017, 08:18:35 UTC flow_dissector: Update pptp handling to avoid null pointer deref. __skb_flow_dissect can be called with a skb or a data packet, either can be NULL. All calls seems to have been moved to __skb_header_pointer except the pptp handling which is still calling skb_header_pointer. skb_header_pointer will use skb->data and thus: [ 109.556866] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [ 109.557102] IP: [<ffffffff88dc02f8>] __skb_flow_dissect+0xa88/0xce0 [ 109.557263] PGD 0 [ 109.557338] [ 109.557484] Oops: 0000 [#1] SMP [ 109.557562] Modules linked in: chaoskey [ 109.557783] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.9.0 #79 [ 109.557867] Hardware name: Supermicro A1SRM-LN7F/LN5F/A1SRM-LN7F-2758, BIOS 1.0c 11/04/2015 [ 109.557957] task: ffff94085c27bc00 task.stack: ffffb745c0068000 [ 109.558041] RIP: 0010:[<ffffffff88dc02f8>] [<ffffffff88dc02f8>] __skb_flow_dissect+0xa88/0xce0 [ 109.558203] RSP: 0018:ffff94087fc83d40 EFLAGS: 00010206 [ 109.558286] RAX: 0000000000000130 RBX: ffffffff8975bf80 RCX: ffff94084fab6800 [ 109.558373] RDX: 0000000000000010 RSI: 000000000000000c RDI: 0000000000000000 [ 109.558460] RBP: 0000000000000b88 R08: 0000000000000000 R09: 0000000000000022 [ 109.558547] R10: 0000000000000008 R11: ffff94087fc83e04 R12: 0000000000000000 [ 109.558763] R13: ffff94084fab6800 R14: ffff94087fc83e04 R15: 000000000000002f [ 109.558979] FS: 0000000000000000(0000) GS:ffff94087fc80000(0000) knlGS:0000000000000000 [ 109.559326] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 109.559539] CR2: 0000000000000080 CR3: 0000000281809000 CR4: 00000000001026e0 [ 109.559753] Stack: [ 109.559957] 000000000000000c ffff94084fab6822 0000000000000001 ffff94085c2b5fc0 [ 109.560578] 0000000000000001 0000000000002000 0000000000000000 0000000000000000 [ 109.561200] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 109.561820] Call Trace: [ 109.562027] <IRQ> [ 109.562108] [<ffffffff88dfb4fa>] ? eth_get_headlen+0x7a/0xf0 [ 109.562522] [<ffffffff88c5a35a>] ? igb_poll+0x96a/0xe80 [ 109.562737] [<ffffffff88dc912b>] ? net_rx_action+0x20b/0x350 [ 109.562953] [<ffffffff88546d68>] ? __do_softirq+0xe8/0x280 [ 109.563169] [<ffffffff8854704a>] ? irq_exit+0xaa/0xb0 [ 109.563382] [<ffffffff8847229b>] ? do_IRQ+0x4b/0xc0 [ 109.563597] [<ffffffff8902d4ff>] ? common_interrupt+0x7f/0x7f [ 109.563810] <EOI> [ 109.563890] [<ffffffff88d57530>] ? cpuidle_enter_state+0x130/0x2c0 [ 109.564304] [<ffffffff88d57520>] ? cpuidle_enter_state+0x120/0x2c0 [ 109.564520] [<ffffffff8857eacf>] ? cpu_startup_entry+0x19f/0x1f0 [ 109.564737] [<ffffffff8848d55a>] ? start_secondary+0x12a/0x140 [ 109.564950] Code: 83 e2 20 a8 80 0f 84 60 01 00 00 c7 04 24 08 00 00 00 66 85 d2 0f 84 be fe ff ff e9 69 fe ff ff 8b 34 24 89 f2 83 c2 04 66 85 c0 <41> 8b 84 24 80 00 00 00 0f 49 d6 41 8d 31 01 d6 41 2b 84 24 84 [ 109.569959] RIP [<ffffffff88dc02f8>] __skb_flow_dissect+0xa88/0xce0 [ 109.570245] RSP <ffff94087fc83d40> [ 109.570453] CR2: 0000000000000080 Fixes: ab10dccb1160 ("rps: Inspect PPTP encapsulated by GRE to get flow hash") Signed-off-by: Ian Kumlien <ian.kumlien@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 January 2017, 17:53:34 UTC
94ba998 David S. Miller 02 January 2017, 17:28:00 UTC Merge tag 'mac80211-for-davem-2017-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A single fix to avoid loading an skb->cb pointer too early. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 02 January 2017, 17:28:00 UTC
35f432a Johannes Berg 02 January 2017, 10:19:29 UTC mac80211: initialize fast-xmit 'info' later In ieee80211_xmit_fast(), 'info' is initialized to point to the skb that's passed in, but that skb may later be replaced by a clone (if it was shared), leading to an invalid pointer. This can lead to use-after-free and also later crashes since the real SKB's info->hw_queue doesn't get initialized properly. Fix this by assigning info only later, when it's needed, after the skb replacement (may have) happened. Cc: stable@vger.kernel.org Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> 02 January 2017, 10:28:25 UTC
eb7903b David S. Miller 02 January 2017, 03:07:25 UTC Merge branch 'l2tp-socket-lookup-fixes' Guillaume Nault says: ==================== l2tp: socket lookup fixes for l2tp_ip and l2tp_ip6 There are still some cases that aren't correctly handled in the socket lookup functions of l2tp_ip and l2tp_ip6. This series fixes lookups for connected sockets and for sockets bound to the IPv6 unspecified address. bind() and connect() should now work as expected on IPPROTO_L2TP sockets. Extra features, like SO_REUSEADDR, remain unsupported. The matching conditions in __l2tp_ip6_bind_lookup() and __l2tp_ip_bind_lookup() are getting hard to read. I've kept the single test approach to make the intend of the patches clear. I'll split the conditionals once these fixes reach net-next. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 02 January 2017, 03:07:25 UTC
a9b2dff Guillaume Nault 30 December 2016, 18:48:20 UTC l2tp: take remote address into account in l2tp_ip and l2tp_ip6 socket lookups For connected sockets, __l2tp_ip{,6}_bind_lookup() needs to check the remote IP when looking for a matching socket. Otherwise a connected socket can receive traffic not originating from its peer. Drop l2tp_ip_bind_lookup() and l2tp_ip6_bind_lookup() instead of updating their prototype, as these functions aren't used. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 02 January 2017, 03:07:20 UTC
97b84fd Guillaume Nault 30 December 2016, 18:48:19 UTC l2tp: consider '::' as wildcard address in l2tp_ip6 socket lookup An L2TP socket bound to the unspecified address should match with any address. If not, it can't receive any packet and __l2tp_ip6_bind_lookup() can't prevent another socket from binding on the same device/tunnel ID. While there, rename the 'addr' variable to 'sk_laddr' (local addr), to make following patch clearer. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 02 January 2017, 03:07:20 UTC
4200462 Reiter Wolfgang 31 December 2016, 20:11:57 UTC drop_monitor: add missing call to genlmsg_end Update nlmsg_len field with genlmsg_end to enable userspace processing using nlmsg_next helper. Also adds error handling. Signed-off-by: Reiter Wolfgang <wr0112358@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 January 2017, 03:00:26 UTC
e1a3a60 Eric Biggers 30 December 2016, 23:42:32 UTC net: socket: don't set sk_uid to garbage value in ->setattr() ->setattr() was recently implemented for socket files to sync the socket inode's uid to the new 'sk_uid' member of struct sock. It does this by copying over the ia_uid member of struct iattr. However, ia_uid is actually only valid when ATTR_UID is set in ia_valid, indicating that the uid is being changed, e.g. by chown. Other metadata operations such as chmod or utimes leave ia_uid uninitialized. Therefore, sk_uid could be set to a "garbage" value from the stack. Fix this by only copying the uid over when ATTR_UID is set. Fixes: 86741ec25462 ("net: core: Add a UID field to struct sock.") Signed-off-by: Eric Biggers <ebiggers@google.com> Tested-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 01 January 2017, 16:53:34 UTC
f5a0aab David Ahern 29 December 2016, 23:29:03 UTC net: ipv4: dst for local input routes should use l3mdev if relevant IPv4 output routes already use l3mdev device instead of loopback for dst's if it is applicable. Change local input routes to do the same. This fixes icmp responses for unreachable UDP ports which are directed to the wrong table after commit 9d1a6c4ea43e4 because local_input routes use the loopback device. Moving from ingress device to loopback loses the L3 domain causing responses based on the dst to get to lost. Fixes: 9d1a6c4ea43e4 ("net: icmp_route_lookup should use rt dev to determine L3 domain") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 December 2016, 03:27:23 UTC
2344ef3 Sergei Shtylyov 29 December 2016, 21:07:38 UTC sh_eth: fix branch prediction in sh_eth_interrupt() IIUC, likely()/unlikely() should apply to the whole *if* statement's expression, not a part of it -- fix such expression in sh_eth_interrupt() accordingly... Fixes: 283e38db65e7 ("sh_eth: Fix serialisation of interrupt disable with interrupt & NAPI handlers") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 December 2016, 03:16:06 UTC
e400b79 David S. Miller 29 December 2016, 19:17:42 UTC Merge branch 'mlx4-misc-fixes' Tariq Toukan says: ==================== mlx4 misc fixes This patchset contains several bug fixes from the team to the mlx4 Eth and Core drivers. Series generated against net commit: 60133867f1f1 'net: wan: slic_ds26522: fix spelling mistake: "configurated" -> "configured"' ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 29 December 2016, 19:17:42 UTC
10b1c04 Jack Morgenstein 29 December 2016, 16:37:13 UTC net/mlx4_core: Fix raw qp flow steering rules under SRIOV Demoting simple flow steering rule priority (for DPDK) was achieved by wrapping FW commands MLX4_QP_FLOW_STEERING_ATTACH/DETACH for the PF as well, and forcing the priority to MLX4_DOMAIN_NIC in the wrapper function for the PF and all VFs. In function mlx4_ib_create_flow(), this change caused the main rule creation for the PF to be wrapped, while it left the associated tunnel steering rule creation unwrapped for the PF. This mismatch caused rule deletion failures in mlx4_ib_destroy_flow() for the PF when the detach wrapper function did not find the associated tunnel-steering rule (since creation of that rule for the PF did not go through the wrapper function). Fix this by setting MLX4_QP_FLOW_STEERING_ATTACH/DETACH to be "native" (so that the PF invocation does not go through the wrapper), and perform the required priority demotion for the PF in the mlx4_ib_create_flow() code path. Fixes: 48564135cba8 ("net/mlx4_core: Demote simple multicast and broadcast flow steering rules") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 December 2016, 19:17:40 UTC
61b6034 Slava Shwartsman 29 December 2016, 16:37:12 UTC net/mlx4_en: Fix type mismatch for 32-bit systems is_power_of_2 expects unsigned long and we pass u64 max_val_cycles, this will be truncated on 32 bit systems, and the result is not what we were expecting. div_u64 expects u32 as a second argument and we pass max_val_cycles_rounded which is u64 hence it will always be truncated. Fix was tested on both 64 and 32 bit systems and got same results for max_val_cycles and max_val_cycles_rounded. Fixes: 4850cf458157 ("net/mlx4_en: Resolve dividing by zero in 32-bit system") Signed-off-by: Slava Shwartsman <slavash@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 December 2016, 19:17:40 UTC
c1d5f8f Leon Romanovsky 29 December 2016, 16:37:11 UTC net/mlx4: Remove BUG_ON from ICM allocation routine This patch removes BUG_ON() macro from mlx4_alloc_icm_coherent() by checking DMA address alignment in advance and performing proper folding in case of error. Fixes: 5b0bf5e25efe ("mlx4_core: Support ICM tables in coherent memory") Reported-by: Ozgur Karatas <okaratas@member.fsf.org> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 December 2016, 19:17:40 UTC
6496bbf Eugenia Emantayev 29 December 2016, 16:37:10 UTC net/mlx4_en: Fix bad WQE issue Single send WQE in RX buffer should be stamped with software ownership in order to prevent the flow of QP in error in FW once UPDATE_QP is called. Fixes: 9f519f68cfff ('mlx4_en: Not using Shared Receive Queues') Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 December 2016, 19:17:40 UTC
3b01fe7 Jack Morgenstein 29 December 2016, 16:37:09 UTC net/mlx4_core: Use-after-free causes a resource leak in flow-steering detach mlx4_QP_FLOW_STEERING_DETACH_wrapper first removes the steering rule (which results in freeing the rule structure), and then references a field in this struct (the qp number) when releasing the busy-status on the rule's qp. Since this memory was freed, it could reallocated and changed. Therefore, the qp number in the struct may be incorrect, so that we are releasing the incorrect qp. This leaves the rule's qp in the busy state (and could possibly release an incorrect qp as well). Fix this by saving the qp number in a local variable, for use after removing the steering rule. Fixes: 2c473ae7e582 ("net/mlx4_core: Disallow releasing VF QPs which have steering rules") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 December 2016, 19:17:40 UTC
f0c16ba Wei Zhang 29 December 2016, 08:45:04 UTC net: fix incorrect original ingress device index in PKTINFO When we send a packet for our own local address on a non-loopback interface (e.g. eth0), due to the change had been introduced from commit 0b922b7a829c ("net: original ingress device index in PKTINFO"), the original ingress device index would be set as the loopback interface. However, the packet should be considered as if it is being arrived via the sending interface (eth0), otherwise it would break the expectation of the userspace application (e.g. the DHCPRELEASE message from dhcp_release binary would be ignored by the dnsmasq daemon, since it come from lo which is not the interface dnsmasq bind to) Fixes: 0b922b7a829c ("net: original ingress device index in PKTINFO") Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Wei Zhang <asuka.com@163.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 December 2016, 19:07:41 UTC
4775cc1 Mathias Krause 28 December 2016, 16:52:15 UTC rtnl: stats - add missing netlink message size checks We miss to check if the netlink message is actually big enough to contain a struct if_stats_msg. Add a check to prevent userland from sending us short messages that would make us access memory beyond the end of the message. Fixes: 10c9ead9f3c6 ("rtnetlink: add new RTM_GETSTATS message to dump...") Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 December 2016, 19:05:15 UTC
b2eb09a Florian Fainelli 28 December 2016, 23:44:41 UTC net: stmmac: Fix error path after register_netdev move Commit 5701659004d6 ("net: stmmac: Fix race between stmmac_drv_probe and stmmac_open") re-ordered how the MDIO bus registration and the network device are registered, but missed to unwind the MDIO bus registration in case we fail to register the network device. Fixes: 5701659004d6 ("net: stmmac: Fix race between stmmac_drv_probe and stmmac_open") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 December 2016, 17:08:11 UTC
e4c5e13 Zheng Li 28 December 2016, 15:23:46 UTC ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output There is an inconsistent conditional judgement between __ip6_append_data and ip6_finish_output functions, the variable length in __ip6_append_data just include the length of application's payload and udp6 header, don't include the length of ipv6 header, but in ip6_finish_output use (skb->len > ip6_skb_dst_mtu(skb)) as judgement, and skb->len include the length of ipv6 header. That causes some particular application's udp6 payloads whose length are between (MTU - IPv6 Header) and MTU were fragmented by ip6_fragment even though the rst->dev support UFO feature. Add the length of ipv6 header to length in __ip6_append_data to keep consistent conditional judgement as ip6_finish_output for ip6 fragment. Signed-off-by: Zheng Li <james.z.li@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 December 2016, 16:55:17 UTC
6013386 Colin Ian King 28 December 2016, 16:44:23 UTC net: wan: slic_ds26522: fix spelling mistake: "configurated" -> "configured" trivial fix to spelling mistake in pr_info message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 20:12:20 UTC
9dd0f89 Augusto Mecking Caringi 28 December 2016, 16:02:05 UTC net: atm: Fix warnings in net/atm/lec.c when !CONFIG_PROC_FS This patch fixes the following warnings when CONFIG_PROC_FS is not set: linux/net/atm/lec.c: In function ‘lane_module_cleanup’: linux/net/atm/lec.c:1062:27: error: ‘atm_proc_root’ undeclared (first use in this function) remove_proc_entry("lec", atm_proc_root); ^ linux/net/atm/lec.c:1062:27: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Augusto Mecking Caringi <augustocaringi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 20:11:32 UTC
4b52416 David S. Miller 28 December 2016, 19:36:54 UTC Merge branch 'mlx5-fixes' Saeed Mahameed says: ==================== Mellanox 100G mlx5 fixes 28-12-2016 Some fixes for mlx5 core and ethernet driver. for -stable: net/mlx5: Check FW limitations on log_max_qp before setting it net/mlx5: Cancel recovery work in remove flow net/mlx5: Avoid shadowing numa_node net/mlx5: Mask destination mac value in ethtool steering rules net/mlx5: Prevent setting multicast macs for VFs net/mlx5e: Don't sync netdev state when not registered net/mlx5e: Disable netdev after close ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 19:36:54 UTC
37f304d Saeed Mahameed 28 December 2016, 12:58:42 UTC net/mlx5e: Disable netdev after close Disable netdev should come after it was closed, although no harm of doing it before -hence the MLX5E_STATE_DESTROYING bit- but it is more natural this way. Fixes: 26e59d8077a3 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 19:36:53 UTC
610e89e Saeed Mahameed 28 December 2016, 12:58:41 UTC net/mlx5e: Don't sync netdev state when not registered Skip setting netdev vxlan ports and netdev rx_mode on driver load when netdev is not yet registered. Synchronizing with netdev state is needed only on reset flow where the netdev remains registered for the whole reset period. This also fixes an access before initialization of net_device.addr_list_lock - which for some reason initialized on register_netdev - where we queued set_rx_mode work on driver load before netdev registration. Fixes: 26e59d8077a3 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 19:36:53 UTC
4525a45 Huy Nguyen 28 December 2016, 12:58:40 UTC net/mlx5e: Check ets capability before initializing ets settings During the initial setup, the ets command is sent to firmware without checking if the HCA supports ets. This causes the invalid command error. Add the ets capiblity check before sending firmware command to initialize ets settings. Fixes: e207b7e99176 ("net/mlx5e: ConnectX-4 firmware support for DCBX") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 19:36:53 UTC
1efbd20 Gal Pressman 28 December 2016, 12:58:39 UTC Revert "net/mlx5: Add MPCNT register infrastructure" This reverts commit 7f503169cabd70c1f13b9279c50eca7dfb9a7d51. Fixes: 7f503169cabd ("net/mlx5: Add MPCNT register infrastructure") Signed-off-by: Gal Pressman <galp@mellanox.com> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 19:36:52 UTC
465db5d Gal Pressman 28 December 2016, 12:58:38 UTC Revert "net/mlx5e: Expose PCIe statistics to ethtool" This reverts commit 9c7262399ba12825f3ca4b00a76d8d5e77c720f5. PCIe counters were introduced in a new firmware version, as a result users with old firmware encountered a syndrome every 200ms due to update stats work. This feature will be re-introduced later with appropriate capabilities infrastructure. Fixes: 9c7262399ba1 ("net/mlx5e: Expose PCIe statistics to ethtool") Signed-off-by: Gal Pressman <galp@mellanox.com> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 19:36:52 UTC
ccce170 Mohamad Haj Yahia 28 December 2016, 12:58:37 UTC net/mlx5: Prevent setting multicast macs for VFs Need to check that VF mac address entered by the admin user is either zero or unicast mac. Multicast mac addresses are prohibited. Fixes: 77256579c6b4 ('net/mlx5: E-Switch, Introduce Vport administration functions') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 19:36:52 UTC
9b8c514 Maor Gottlieb 28 December 2016, 12:58:36 UTC net/mlx5: Release FTE lock in error flow Release the FTE lock when adding rule to the FTE has failed. Fixes: 0fd758d6112f ('net/mlx5: Don't unlock fte while still using it') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 19:36:51 UTC
077b1e8 Maor Gottlieb 28 December 2016, 12:58:35 UTC net/mlx5: Mask destination mac value in ethtool steering rules We need to mask the destination mac value with the destination mac mask when adding steering rule via ethtool. Fixes: 1174fce8d1410 ('net/mlx5e: Support l3/l4 flow type specs in ethtool flow steering') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 19:36:51 UTC
d151d73 Eli Cohen 28 December 2016, 12:58:34 UTC net/mlx5: Avoid shadowing numa_node Avoid using a local variable named numa_node to avoid shadowing a public one. Fixes: db058a186f98 ('net/mlx5_core: Set irq affinity hints') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 19:36:51 UTC
689a248 Daniel Jurgens 28 December 2016, 12:58:33 UTC net/mlx5: Cancel recovery work in remove flow If there is pending delayed work for health recovery it must be canceled if the device is being unloaded. Fixes: 05ac2c0b7438 ("net/mlx5: Fix race between PCI error handlers and health work") Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 19:36:50 UTC
883371c Noa Osherovich 28 December 2016, 12:58:32 UTC net/mlx5: Check FW limitations on log_max_qp before setting it When setting HCA capabilities, set log_max_qp to be the minimum between the selected profile's value and the HCA limitation. Fixes: 938fe83c8dcb ('net/mlx5_core: New device capabilities...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 19:36:50 UTC
9da34cd Or Gerlitz 28 December 2016, 12:58:31 UTC net/mlx5: Disable RoCE on the e-switch management port under switchdev mode Under the switchdev/offloads mode, packets that don't match any e-switch steering rule are sent towards the e-switch management port. We use a NIC HW steering rule set per vport (uplink and VFs) to make them be received into the host OS through the respective vport representor netdevice. Currnetly such missed RoCE packets will not get to this NIC steering rule, and hence VF RoCE will not work over the slow path of the offloads mode. This is b/c these packets will be matched by a steering rule added by the firmware that serves RoCE traffic set on the PF NIC vport which is also the e-switch management port under SRIOV. Disabling RoCE on the e-switch management vport when we are in the offloads mode, will signal to the firmware to remove their RoCE rule, and then the missed RoCE packets will be matched by the representor NIC steering rule as any other missed packets. To achieve that, we disable RoCE on the PF vport. We do that by removing (hot-unplugging) the IB device instance associated with the PF. This is also required by our current model where the PF serves as the uplink representor and hence only SW switching (TC, bridge, OVS) applications and slow path vport mlx5e net-device should be running over that vport. Fixes: c930a3ad7453 ('net/mlx5e: Add devlink based SRIOV mode changes') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 19:36:50 UTC
0df0f20 Paul Blakey 28 December 2016, 12:54:47 UTC net/sched: cls_flower: Fix missing addr_type in classify Since we now use a non zero mask on addr_type, we are matching on its value (IPV4/IPV6). So before this fix, matching on enc_src_ip/enc_dst_ip failed in SW/classify path since its value was zero. This patch sets the proper value of addr_type for encapsulated packets. Fixes: 970bfcd09791 ('net/sched: cls_flower: Use mask for addr_type') Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 19:28:13 UTC
5701659 Florian Fainelli 28 December 2016, 02:23:06 UTC net: stmmac: Fix race between stmmac_drv_probe and stmmac_open There is currently a small window during which the network device registered by stmmac can be made visible, yet all resources, including and clock and MDIO bus have not had a chance to be set up, this can lead to the following error to occur: [ 473.919358] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): stmmac_dvr_probe: warning: cannot get CSR clock [ 473.919382] stmmaceth 0000:01:00.0: no reset control found [ 473.919412] stmmac - user ID: 0x10, Synopsys ID: 0x42 [ 473.919429] stmmaceth 0000:01:00.0: DMA HW capability register supported [ 473.919436] stmmaceth 0000:01:00.0: RX Checksum Offload Engine supported [ 473.919443] stmmaceth 0000:01:00.0: TX Checksum insertion supported [ 473.919451] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer [ 473.921395] libphy: PHY stmmac-1:00 not found [ 473.921417] stmmaceth 0000:01:00.0 eth0: Could not attach to PHY [ 473.921427] stmmaceth 0000:01:00.0 eth0: stmmac_open: Cannot attach to PHY (error: -19) [ 473.959710] libphy: stmmac: probed [ 473.959724] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 0 IRQ POLL (stmmac-1:00) active [ 473.959728] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 1 IRQ POLL (stmmac-1:01) [ 473.959731] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 2 IRQ POLL (stmmac-1:02) [ 473.959734] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 3 IRQ POLL (stmmac-1:03) Fix this by making sure that register_netdev() is the last thing being done, which guarantees that the clock and the MDIO bus are available. Fixes: 4bfcbd7abce2 ("stmmac: Move the mdio_register/_unregister in probe/remove") Reported-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 December 2016, 02:31:41 UTC
8f18e4d Linus Torvalds 28 December 2016, 00:04:37 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Various ipvlan fixes from Eric Dumazet and Mahesh Bandewar. The most important is to not assume the packet is RX just because the destination address matches that of the device. Such an assumption causes problems when an interface is put into loopback mode. 2) If we retry when creating a new tc entry (because we dropped the RTNL mutex in order to load a module, for example) we end up with -EAGAIN and then loop trying to replay the request. But we didn't reset some state when looping back to the top like this, and if another thread meanwhile inserted the same tc entry we were trying to, we re-link it creating an enless loop in the tc chain. Fix from Daniel Borkmann. 3) There are two different WRITE bits in the MDIO address register for the stmmac chip, depending upon the chip variant. Due to a bug we could set them both, fix from Hock Leong Kweh. 4) Fix mlx4 bug in XDP_TX handling, from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: stmmac: fix incorrect bit set in gmac4 mdio addr register r8169: add support for RTL8168 series add-on card. net: xdp: remove unused bfp_warn_invalid_xdp_buffer() openvswitch: upcall: Fix vlan handling. ipv4: Namespaceify tcp_tw_reuse knob net: korina: Fix NAPI versus resources freeing net, sched: fix soft lockup in tc_classify net/mlx4_en: Fix user prio field in XDP forward tipc: don't send FIN message from connectionless socket ipvlan: fix multicast processing ipvlan: fix various issues in ipvlan_process_multicast() 28 December 2016, 00:04:37 UTC
5799fc9 Kweh, Hock Leong 27 December 2016, 20:07:41 UTC net: stmmac: fix incorrect bit set in gmac4 mdio addr register Fixing the gmac4 mdio write access to use MII_GMAC4_WRITE only instead of OR together with MII_WRITE. Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Acked-By: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2016, 17:28:08 UTC
610c908 Chun-Hao Lin 27 December 2016, 08:29:43 UTC r8169: add support for RTL8168 series add-on card. This chip is the same as RTL8168, but its device id is 0x8161. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2016, 17:28:07 UTC
be26727 Jason Wang 27 December 2016, 02:49:54 UTC net: xdp: remove unused bfp_warn_invalid_xdp_buffer() After commit 73b62bd085f4737679ea9afc7867fa5f99ba7d1b ("virtio-net: remove the warning before XDP linearizing"), there's no users for bpf_warn_invalid_xdp_buffer(), so remove it. This is a revert for commit f23bc46c30ca5ef58b8549434899fcbac41b2cfc. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2016, 17:28:07 UTC
df30f74 pravin shelar 26 December 2016, 16:31:27 UTC openvswitch: upcall: Fix vlan handling. Networking stack accelerate vlan tag handling by keeping topmost vlan header in skb. This works as long as packet remains in OVS datapath. But during OVS upcall vlan header is pushed on to the packet. When such packet is sent back to OVS datapath, core networking stack might not handle it correctly. Following patch avoids this issue by accelerating the vlan tag during flow key extract. This simplifies datapath by bringing uniform packet processing for packets from all code paths. Fixes: 5108bbaddc ("openvswitch: add processing of L3 packets"). CC: Jarno Rajahalme <jarno@ovn.org> CC: Jiri Benc <jbenc@redhat.com> Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2016, 17:28:07 UTC
56ab6b9 Haishuang Yan 25 December 2016, 06:33:16 UTC ipv4: Namespaceify tcp_tw_reuse knob Different namespaces might have different requirements to reuse TIME-WAIT sockets for new connections. This might be required in cases where different namespace applications are in place which require TIME_WAIT socket connections to be reduced independently of the host. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 December 2016, 17:28:07 UTC
0dad3a3 Thomas Gleixner 26 December 2016, 21:58:20 UTC x86/mce/AMD: Make the init code more robust If mce_device_init() fails then the mce device pointer is NULL and the AMD mce code happily dereferences it. Add a sanity check. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 December 2016, 01:30:24 UTC
b9d9d69 Thomas Gleixner 26 December 2016, 21:58:19 UTC smp/hotplug: Undo tglxs brainfart The attempt to prevent overwriting an active state resulted in a disaster which effectively disables all dynamically allocated hotplug states. Cleanup the mess. Fixes: dc280d936239 ("cpu/hotplug: Prevent overwriting of callbacks") Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 December 2016, 01:30:24 UTC
b4b8664 Al Viro 26 December 2016, 09:10:19 UTC arm64: don't pull uaccess.h into *.S Split asm-only parts of arm64 uaccess.h into a new header and use that from *.S. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 26 December 2016, 18:05:17 UTC
e6afb1a Florian Fainelli 24 December 2016, 03:56:56 UTC net: korina: Fix NAPI versus resources freeing Commit beb0babfb77e ("korina: disable napi on close and restart") introduced calls to napi_disable() that were missing before, unfortunately this leaves a small window during which NAPI has a chance to run, yet we just freed resources since korina_free_ring() has been called: Fix this by disabling NAPI first then freeing resource, and make sure that we also cancel the restart task before doing the resource freeing. Fixes: beb0babfb77e ("korina: disable napi on close and restart") Reported-by: Alexandros C. Couloumbis <alex@ozo.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2016, 16:26:16 UTC
628185c Daniel Borkmann 21 December 2016, 17:04:11 UTC net, sched: fix soft lockup in tc_classify Shahar reported a soft lockup in tc_classify(), where we run into an endless loop when walking the classifier chain due to tp->next == tp which is a state we should never run into. The issue only seems to trigger under load in the tc control path. What happens is that in tc_ctl_tfilter(), thread A allocates a new tp, initializes it, sets tp_created to 1, and calls into tp->ops->change() with it. In that classifier callback we had to unlock/lock the rtnl mutex and returned with -EAGAIN. One reason why we need to drop there is, for example, that we need to request an action module to be loaded. This happens via tcf_exts_validate() -> tcf_action_init/_1() meaning after we loaded and found the requested action, we need to redo the whole request so we don't race against others. While we had to unlock rtnl in that time, thread B's request was processed next on that CPU. Thread B added a new tp instance successfully to the classifier chain. When thread A returned grabbing the rtnl mutex again, propagating -EAGAIN and destroying its tp instance which never got linked, we goto replay and redo A's request. This time when walking the classifier chain in tc_ctl_tfilter() for checking for existing tp instances we had a priority match and found the tp instance that was created and linked by thread B. Now calling again into tp->ops->change() with that tp was successful and returned without error. tp_created was never cleared in the second round, thus kernel thinks that we need to link it into the classifier chain (once again). tp and *back point to the same object due to the match we had earlier on. Thus for thread B's already public tp, we reset tp->next to tp itself and link it into the chain, which eventually causes the mentioned endless loop in tc_classify() once a packet hits the data path. Fix is to clear tp_created at the beginning of each request, also when we replay it. On the paths that can cause -EAGAIN we already destroy the original tp instance we had and on replay we really need to start from scratch. It seems that this issue was first introduced in commit 12186be7d2e1 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup"). Fixes: 12186be7d2e1 ("net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup") Reported-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Tested-by: Shahar Klein <shahark@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2016, 16:24:10 UTC
7ce7d89 Linus Torvalds 26 December 2016, 00:13:08 UTC Linux 4.10-rc1 26 December 2016, 00:13:08 UTC
8ae679c Larry Finger 23 December 2016, 03:06:53 UTC powerpc: Fix build warning on 32-bit PPC I am getting the following warning when I build kernel 4.9-git on my PowerBook G4 with a 32-bit PPC processor: AS arch/powerpc/kernel/misc_32.o arch/powerpc/kernel/misc_32.S:299:7: warning: "CONFIG_FSL_BOOKE" is not defined [-Wundef] This problem is evident after commit 989cea5c14be ("kbuild: prevent lib-ksyms.o rebuilds"); however, this change in kbuild only exposes an error that has been in the code since 2005 when this source file was created. That was with commit 9994a33865f4 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S"). The offending line does not make a lot of sense. This error does not seem to cause any errors in the executable, thus I am not recommending that it be applied to any stable versions. Thanks to Nicholas Piggin for suggesting this solution. Fixes: 9994a33865f4 ("powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 December 2016, 00:12:20 UTC
d33d5a6 Linus Torvalds 25 December 2016, 22:56:58 UTC avoid spurious "may be used uninitialized" warning The timer type simplifications caused a new gcc warning: drivers/base/power/domain.c: In function ‘genpd_runtime_suspend’: drivers/base/power/domain.c:562:14: warning: ‘time_start’ may be used uninitialized in this function [-Wmaybe-uninitialized] elapsed_ns = ktime_to_ns(ktime_sub(ktime_get(), time_start)); despite the actual use of "time_start" not having changed in any way. It appears that simply changing the type of ktime_t from a union to a plain scalar type made gcc check the use. The variable wasn't actually used uninitialized, but gcc apparently failed to notice that the conditional around the use was exactly the same as the conditional around the initialization of that variable. Add an unnecessary initialization just to shut up the compiler. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 December 2016, 22:56:58 UTC
3ddc76d Linus Torvalds 25 December 2016, 22:30:04 UTC Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer type cleanups from Thomas Gleixner: "This series does a tree wide cleanup of types related to timers/timekeeping. - Get rid of cycles_t and use a plain u64. The type is not really helpful and caused more confusion than clarity - Get rid of the ktime union. The union has become useless as we use the scalar nanoseconds storage unconditionally now. The 32bit timespec alike storage got removed due to the Y2038 limitations some time ago. That leaves the odd union access around for no reason. Clean it up. Both changes have been done with coccinelle and a small amount of manual mopping up" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ktime: Get rid of ktime_equal() ktime: Cleanup ktime_set() usage ktime: Get rid of the union clocksource: Use a plain u64 instead of cycle_t 25 December 2016, 22:30:04 UTC
b272f73 Linus Torvalds 25 December 2016, 22:05:56 UTC Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP hotplug notifier removal from Thomas Gleixner: "This is the final cleanup of the hotplug notifier infrastructure. The series has been reintgrated in the last two days because there came a new driver using the old infrastructure via the SCSI tree. Summary: - convert the last leftover drivers utilizing notifiers - fixup for a completely broken hotplug user - prevent setup of already used states - removal of the notifiers - treewide cleanup of hotplug state names - consolidation of state space There is a sphinx based documentation pending, but that needs review from the documentation folks" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/armada-xp: Consolidate hotplug state space irqchip/gic: Consolidate hotplug state space coresight/etm3/4x: Consolidate hotplug state space cpu/hotplug: Cleanup state names cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions staging/lustre/libcfs: Convert to hotplug state machine scsi/bnx2i: Convert to hotplug state machine scsi/bnx2fc: Convert to hotplug state machine cpu/hotplug: Prevent overwriting of callbacks x86/msr: Remove bogus cleanup from the error path bus: arm-ccn: Prevent hotplug callback leak perf/x86/intel/cstate: Prevent hotplug callback leak ARM/imx/mmcd: Fix broken cpu hotplug handling scsi: qedi: Convert to hotplug state machine 25 December 2016, 22:05:56 UTC
10bbe75 Linus Torvalds 25 December 2016, 22:01:28 UTC Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown. * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: remove obsolete -M, -m, -C, -c options tools/power turbostat: Make extensible via the --add parameter tools/power turbostat: Denverton uses a 25 MHz crystal, not 19.2 MHz tools/power turbostat: line up headers when -M is used tools/power turbostat: fix SKX PKG_CSTATE_LIMIT decoding tools/power turbostat: Support Knights Mill (KNM) tools/power turbostat: Display HWP OOB status tools/power turbostat: fix Denverton BCLK tools/power turbostat: use intel-family.h model strings tools/power/turbostat: Add Denverton RAPL support tools/power/turbostat: Add Denverton support tools/power/turbostat: split core MSR support into status + limit tools/power turbostat: fix error case overflow read of slm_freq_table[] tools/power turbostat: Allocate correct amount of fd and irq entries tools/power turbostat: switch to tab delimited output tools/power turbostat: Gracefully handle ACPI S3 tools/power turbostat: tidy up output on Joule counter overflow 25 December 2016, 22:01:28 UTC
6290602 Nicholas Piggin 25 December 2016, 03:00:30 UTC mm: add PageWaiters indicating tasks are waiting for a page bit Add a new page flag, PageWaiters, to indicate the page waitqueue has tasks waiting. This can be tested rather than testing waitqueue_active which requires another cacheline load. This bit is always set when the page has tasks on page_waitqueue(page), and is set and cleared under the waitqueue lock. It may be set when there are no tasks on the waitqueue, which will cause a harmless extra wakeup check that will clears the bit. The generic bit-waitqueue infrastructure is no longer used for pages. Instead, waitqueues are used directly with a custom key type. The generic code was not flexible enough to have PageWaiters manipulation under the waitqueue lock (which simplifies concurrency). This improves the performance of page lock intensive microbenchmarks by 2-3%. Putting two bits in the same word opens the opportunity to remove the memory barrier between clearing the lock bit and testing the waiters bit, after some work on the arch primitives (e.g., ensuring memory operand widths match and cover both bits). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 December 2016, 19:54:48 UTC
6326fec Nicholas Piggin 25 December 2016, 03:00:29 UTC mm: Use owner_priv bit for PageSwapCache, valid when PageSwapBacked A page is not added to the swap cache without being swap backed, so PageSwapBacked mappings can use PG_owner_priv_1 for PageSwapCache. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 December 2016, 19:54:48 UTC
1f3a8e4 Thomas Gleixner 25 December 2016, 11:43:07 UTC ktime: Get rid of ktime_equal() No point in going through loops and hoops instead of just comparing the values. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> 25 December 2016, 16:21:23 UTC
8b0e195 Thomas Gleixner 25 December 2016, 11:30:41 UTC ktime: Cleanup ktime_set() usage ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> 25 December 2016, 16:21:22 UTC
2456e85 Thomas Gleixner 25 December 2016, 10:38:40 UTC ktime: Get rid of the union ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> 25 December 2016, 16:21:22 UTC
a5a1d1c Thomas Gleixner 21 December 2016, 19:32:01 UTC clocksource: Use a plain u64 instead of cycle_t There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> 25 December 2016, 10:04:12 UTC
008b69e Thomas Gleixner 21 December 2016, 19:19:57 UTC irqchip/armada-xp: Consolidate hotplug state space The mpic is either the main interrupt controller or is cascaded behind a GIC. The mpic is single instance and the modes are mutually exclusive, so there is no reason to have seperate cpu hotplug states. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/20161221192112.333161745@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 25 December 2016, 09:47:44 UTC
6896bcd Thomas Gleixner 21 December 2016, 19:19:56 UTC irqchip/gic: Consolidate hotplug state space Even if both drivers are compiled in only one instance can run on a given system depending on the available GIC version. So having seperate hotplug states for them is pointless. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.252416267@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 25 December 2016, 09:47:44 UTC
36e5b0e Thomas Gleixner 21 December 2016, 19:19:55 UTC coresight/etm3/4x: Consolidate hotplug state space Even if both drivers are compiled in only one instance can run on a given system depending on the available tracer cell. So having seperate hotplug states for them is pointless. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/20161221192112.162765484@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 25 December 2016, 09:47:44 UTC
73c1b41 Thomas Gleixner 21 December 2016, 19:19:54 UTC cpu/hotplug: Cleanup state names When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 25 December 2016, 09:47:44 UTC
530e9b7 Thomas Gleixner 21 December 2016, 19:19:53 UTC cpu/hotplug: Remove obsolete cpu hotplug register/unregister functions hotcpu_notifier(), cpu_notifier(), __hotcpu_notifier(), __cpu_notifier(), register_hotcpu_notifier(), register_cpu_notifier(), __register_hotcpu_notifier(), __register_cpu_notifier(), unregister_hotcpu_notifier(), unregister_cpu_notifier(), __unregister_hotcpu_notifier(), __unregister_cpu_notifier() are unused now. Remove them and all related code. Remove also the now pointless cpu notifier error injection mechanism. The states can be executed step by step and error rollback is the same as cpu down, so any state transition can be tested w/o requiring the notifier error injection. Some CPU hotplug states are kept as they are (ab)used for hotplug state tracking. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20161221192112.005642358@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 25 December 2016, 09:47:43 UTC
7b73796 Anna-Maria Gleixner 21 December 2016, 19:19:52 UTC staging/lustre/libcfs: Convert to hotplug state machine Install the callbacks via the state machine. No functional change. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: devel@driverdev.osuosl.org Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: rt@linutronix.de Cc: lustre-devel@lists.lustre.org Link: http://lkml.kernel.org/r/20161202110027.htzzeervzkoc4muv@linutronix.de Link: http://lkml.kernel.org/r/20161221192111.922872524@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 25 December 2016, 09:47:43 UTC
e210faa Sebastian Andrzej Siewior 21 December 2016, 19:19:51 UTC scsi/bnx2i: Convert to hotplug state machine Install the callbacks via the state machine. No functional change. This is the minimal fixup so we can remove the hotplug notifier mess completely. The real rework of this driver to use work queues is still stuck in review/testing on the SCSI mailing list. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: QLogic-Storage-Upstream@qlogic.com Cc: Johannes Thumshirn <jth@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20161221192111.836895753@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 25 December 2016, 09:47:43 UTC
c53b005 Sebastian Andrzej Siewior 21 December 2016, 19:19:50 UTC scsi/bnx2fc: Convert to hotplug state machine Install the callbacks via the state machine. No functional change. This is the minimal fixup so we can remove the hotplug notifier mess completely. The real rework of this driver to use work queues is still stuck in review/testing on the SCSI mailing list. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Chad Dupuis <chad.dupuis@qlogic.com> Cc: QLogic-Storage-Upstream@qlogic.com Cc: Johannes Thumshirn <jth@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20161221192111.757309869@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 25 December 2016, 09:47:42 UTC
dc280d9 Thomas Gleixner 21 December 2016, 19:19:49 UTC cpu/hotplug: Prevent overwriting of callbacks Developers manage to overwrite states blindly without thought. That's fatal and hard to debug. Add sanity checks to make it fail. This requries to restructure the code so that the dynamic state allocation happens in the same lock protected section as the actual store. Otherwise the previous assignment of 'Reserved' to the name field would trigger the overwrite check. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20161221192111.675234535@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 25 December 2016, 09:47:42 UTC
59fefd0 Thomas Gleixner 22 December 2016, 09:32:38 UTC x86/msr: Remove bogus cleanup from the error path The error cleanup which is invoked when the hotplug state setup failed tries to remove the failed state, which is broken. Fixes: 8fba38c937cd ("x86/msr: Convert to hotplug state machine") Reported-by: kernel test robot <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Siewior <bigeasy@linutronix.de> 25 December 2016, 09:47:41 UTC
26242b3 Thomas Gleixner 22 December 2016, 10:14:06 UTC bus: arm-ccn: Prevent hotplug callback leak In case the driver registration fails, the hotplug callback is leaked. Not fatal, because it's never invoked as there are no instances registered, but wrong nevertheless. Fixes: fdc15a36d84e ("bus/arm-ccn: Convert to hotplug statemachine") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> 25 December 2016, 09:47:40 UTC
834fcd2 Thomas Gleixner 22 December 2016, 10:02:08 UTC perf/x86/intel/cstate: Prevent hotplug callback leak If the pmu registration fails the registered hotplug callbacks are not removed. Wrong in any case, but fatal in case of a modular driver. Replace the nonsensical state names with proper ones while at it. Fixes: 77c34ef1c319 ("perf/x86/intel/cstate: Convert Intel CSTATE to hotplug state machine") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org 25 December 2016, 09:47:40 UTC
a051f22 Thomas Gleixner 21 December 2016, 19:19:48 UTC ARM/imx/mmcd: Fix broken cpu hotplug handling The cpu hotplug support of this perf driver is broken in several ways: 1) It adds a instance before setting up the state. 2) The state for the instance is different from the state of the callback. It's just a randomly chosen state. 3) The instance registration is not error checked so nobody noticed that the call can never succeed. 4) The state for the multi install callbacks is chosen randomly and overwrites existing state. This is now prevented by the core code so the call is guaranteed to fail. 5) The error exit path in the init function leaves the instance registered and then frees the memory which contains the enqueued hlist node. 6) The remove function is removing the state and not the instance. Fix it by: - Setting up the state before adding instances. Use a dynamically allocated state for it. - Installing instances after the state has been set up - Removing the instance in the error path before freeing memory - Removing the instance not the state in the driver remove callback While at is use raw_cpu_processor_id(), because cpu_processor_id() cannot be used in preemptible context, and set the driver data after successful registration of the pmu. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Frank Li <frank.li@nxp.com> Cc: Zhengyu Shen <zhengyu.shen@nxp.com> Link: http://lkml.kernel.org/r/20161221192111.596204211@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 25 December 2016, 09:47:40 UTC
a98d1a0 Thomas Gleixner 24 December 2016, 11:34:02 UTC scsi: qedi: Convert to hotplug state machine The CPU hotplug code is a trainwreck. It leaks a notifier in case of driver registration error and the per cpu loop is racy against cpu hotplug. Aside of that the driver should have been written and merged with the new state machine interfaces in the first place. Mop up the mess and Convert it to the hotplug state machine. Signed-off-by: Thomas Grumpy Gleixner <tglx@linutronix.de> Cc: Nilesh Javali <nilesh.javali@cavium.com> Cc: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Cc: Chad Dupuis <chad.dupuis@cavium.com> Cc: Saurav Kashyap <saurav.kashyap@cavium.com> Cc: Arun Easi <arun.easi@cavium.com> Cc: Manish Rangankar <manish.rangankar@cavium.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> 25 December 2016, 09:47:18 UTC
6886fee Len Brown 24 December 2016, 20:18:37 UTC tools/power turbostat: remove obsolete -M, -m, -C, -c options The new --add option has replaced the -M, -m, -C, -c options Eg. -M 0x10 is now --add msr0x10,raw -m 0x10 is now --add msr0x10,raw,u32 -C 0x10 is now --add msr0x10,delta -c 0x10 is now --add msr0x10,delta,u32 The --add option can be repeated to add any number of counters, while the previous options were limited to adding one of each type. In addition, the --add option can accept a column label, and can also display a counter as a percentage of elapsed cycles. Eg. --add msr0x3fe,core,percent,MY_CC3 Signed-off-by: Len Brown <len.brown@intel.com> 24 December 2016, 20:38:09 UTC
388e9c8 Len Brown 23 December 2016, 04:57:55 UTC tools/power turbostat: Make extensible via the --add parameter Create the "--add" parameter. This can be used to teach an existing turbostat binary about any number of any type of counter. turbostat(8) details the syntax for --add. Signed-off-by: Len Brown <len.brown@intel.com> 24 December 2016, 20:16:10 UTC
7c0f6ba Linus Torvalds 24 December 2016, 19:46:01 UTC Replace <asm/uaccess.h> with <linux/uaccess.h> globally This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 December 2016, 19:46:01 UTC
1dd5c6b Linus Torvalds 24 December 2016, 19:37:18 UTC Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "This ncludes various cifs/smb3 bug fixes, mostly for stable as well. In the next week I expect that Germano will have some reconnection fixes, and also I expect to have the remaining pieces of the snapshot enablement and SMB3 ACLs, but wanted to get this set of bug fixes in" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs_get_root shouldn't use path with tree name Fix default behaviour for empty domains and add domainauto option cifs: use %16phN for formatting md5 sum cifs: Fix smbencrypt() to stop pointing a scatterlist at the stack CIFS: Fix a possible double locking of mutex during reconnect CIFS: Fix a possible memory corruption during reconnect CIFS: Fix a possible memory corruption in push locks CIFS: Fix missing nls unload in smb2_reconnect() CIFS: Decrease verbosity of ioctl call SMB3: parsing for new snapshot timestamp mount parm 24 December 2016, 19:37:18 UTC
3a77fa8 Linus Torvalds 24 December 2016, 19:27:45 UTC Merge tag 'watchdog-for-linus-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull watchdog updates from Wim Van Sebroeck and Guenter Roeck: - new driver for Add Loongson1 SoC - minor cleanup and fixes in various drivers * tag 'watchdog-for-linus-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: watchdog: it87_wdt: add IT8620E ID watchdog: mpc8xxx: Remove unneeded linux/miscdevice.h include watchdog: octeon: Remove unneeded linux/miscdevice.h include watchdog: bcm2835_wdt: set WDOG_HW_RUNNING bit when appropriate watchdog: loongson1: Add Loongson1 SoC watchdog driver watchdog: cpwd: remove memory allocate failure message watchdog: da9062/61: watchdog driver intel-mid_wdt: Error code is just an integer intel-mid_wdt: make sure watchdog is not running at startup watchdog: mei_wdt: request stop on reboot to prevent false positive event watchdog: hpwdt: changed maintainer information watchdog: jz4740: Fix modular build watchdog: qcom: fix kernel panic due to external abort on non-linefetch watchdog: davinci: add support for deferred probing watchdog: meson: Remove unneeded platform MODULE_ALIAS watchdog: Standardize leading tabs and spaces in Kconfig file watchdog: max77620_wdt: fix module autoload watchdog: bcm7038_wdt: fix module autoload 24 December 2016, 19:27:45 UTC
01e0d60 Linus Torvalds 24 December 2016, 19:23:24 UTC Merge tag 'ntb-4.10' of git://github.com/jonmason/ntb Pull NTB update from Jon Mason: - NTB bug fixes for removing an unnecessary call to ntb_peer_spad_read, and correcting a free_irq inconsistency - add Intel SKX support - change the AMD NTB maintainer, and fix some bugs present there * tag 'ntb-4.10' of git://github.com/jonmason/ntb: ntb_transport: Remove unnecessary call to ntb_peer_spad_read NTB: Fix 'request_irq()' and 'free_irq()' inconsistancy ntb: fix SKX NTB config space size register offsets NTB: correct ntb_peer_spad_read for case when callback is not supplied. MAINTAINERS: Change in maintainer for AMD NTB ntb_transport: Limit memory windows based on available, scratchpads NTB: Register and offset values fix for memory window NTB: add support for hotplug feature ntb: Adding Skylake Xeon NTB support 24 December 2016, 19:23:24 UTC
6ac3bb1 Linus Torvalds 24 December 2016, 00:54:46 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "There's a number of fixes: - a round of fixes for CPUID-less legacy CPUs - a number of microcode loader fixes - i8042 detection robustization fixes - stack dump/unwinder fixes - x86 SoC platform driver fixes - a GCC 7 warning fix - virtualization related fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) Revert "x86/unwind: Detect bad stack return address" x86/paravirt: Mark unused patch_default label x86/microcode/AMD: Reload proper initrd start address x86/platform/intel/quark: Add printf attribute to imr_self_test_result() x86/platform/intel-mid: Switch MPU3050 driver to IIO x86/alternatives: Do not use sync_core() to serialize I$ x86/topology: Document cpu_llc_id x86/hyperv: Handle unknown NMIs on one CPU when unknown_nmi_panic x86/asm: Rewrite sync_core() to use IRET-to-self x86/microcode/intel: Replace sync_core() with native_cpuid() Revert "x86/boot: Fail the boot if !M486 and CPUID is missing" x86/asm/32: Make sync_core() handle missing CPUID on all 32-bit kernels x86/cpu: Probe CPUID leaf 6 even when cpuid_level == 6 x86/tools: Fix gcc-7 warning in relocs.c x86/unwind: Dump stack data on warnings x86/unwind: Adjust last frame check for aligned function stacks x86/init: Fix a couple of comment typos x86/init: Remove i8042_detect() from platform ops Input: i8042 - Trust firmware a bit more when probing on X86 x86/init: Add i8042 state to the platform data ... 24 December 2016, 00:54:46 UTC
eb3e8d9 Linus Torvalds 24 December 2016, 00:51:16 UTC Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "ARM/MOXA SoC clocksource driver fixes" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/moxart: Plug memory and mapping leaks 24 December 2016, 00:51:16 UTC
00198da Linus Torvalds 24 December 2016, 00:49:12 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "On the kernel side there's two x86 PMU driver fixes and a uprobes fix, plus on the tooling side there's a number of fixes and some late updates" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) perf sched timehist: Fix invalid period calculation perf sched timehist: Remove hardcoded 'comm_width' check at print_summary perf sched timehist: Enlarge default 'comm_width' perf sched timehist: Honour 'comm_width' when aligning the headers perf/x86: Fix overlap counter scheduling bug perf/x86/pebs: Fix handling of PEBS buffer overflows samples/bpf: Move open_raw_sock to separate header samples/bpf: Remove perf_event_open() declaration samples/bpf: Be consistent with bpf_load_program bpf_insn parameter tools lib bpf: Add bpf_prog_{attach,detach} samples/bpf: Switch over to libbpf perf diff: Do not overwrite valid build id perf annotate: Don't throw error for zero length symbols perf bench futex: Fix lock-pi help string perf trace: Check if MAP_32BIT is defined (again) samples/bpf: Make perf_event_read() static uprobes: Fix uprobes on MIPS, allow for a cache flush after ixol breakpoint creation samples/bpf: Make samples more libbpf-centric tools lib bpf: Add flags to bpf_create_map() tools lib bpf: use __u32 from linux/types.h ... 24 December 2016, 00:49:12 UTC
9004fda Linus Torvalds 24 December 2016, 00:47:25 UTC Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "A build warning fix with certain .config's" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/st: Mark st_irq_syscfg_resume() __maybe_unused 24 December 2016, 00:47:25 UTC
eb9def6 Tariq Toukan 22 December 2016, 12:32:58 UTC net/mlx4_en: Fix user prio field in XDP forward The user prio field is wrong (and overflows) in the XDP forward flow. This is a result of a bad value for num_tx_rings_p_up, which should account all XDP TX rings, as they operate for the same user prio. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reported-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> 23 December 2016, 22:53:47 UTC
back to top