https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
e459dfe ipv6/addrlabel: fix ip6addrlbl_get() ip6addrlbl_get() has never worked. If ip6addrlbl_hold() succeeded, ip6addrlbl_get() will exit with '-ESRCH'. If ip6addrlbl_hold() failed, ip6addrlbl_get() will use about to be free ip6addrlbl_entry pointer. Fix this by inverting ip6addrlbl_hold() check. Fixes: 2a8cc6c89039 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Cong Wang <cwang@twopensource.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> 22 December 2015, 20:57:54 UTC
ef9cdd0 switchdev: bridge: Pass ageing time as clock_t instead of jiffies The bridge's ageing time is offloaded to hardware when: 1) A port joins a bridge 2) The ageing time of the bridge is changed In the first case the ageing time is offloaded as jiffies, but in the second case it's offloaded as clock_t, which is what existing switchdev drivers expect to receive. Fixes: 6ac311ae8bfb ("Adding switchdev ageing notification on port bridged") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 December 2015, 20:56:44 UTC
5cbf20c sh_eth: fix 16-bit descriptor field access endianness too Commit 1299653affa4 ("sh_eth: fix descriptor access endianness") only addressed the 32-bit buffer address field byte-swapping but the driver still accesses 16-bit frame/buffer length descriptor fields without the necessary byte-swapping -- which should affect the big-endian kernels. In order to be able to use {cpu|edmac}_to_{edmac|cpu}(), we need to declare the RX/TX descriptor word 1 as a 32-bit field and use shifts/masking to access the 16-bit subfields (which gets rid of the ugly #ifdef'ery too)... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 December 2015, 20:23:47 UTC
ce8c839 veth: don’t modify ip_summed; doing so treats packets with bad checksums as good. Packets that arrive from real hardware devices have ip_summed == CHECKSUM_UNNECESSARY if the hardware verified the checksums, or CHECKSUM_NONE if the packet is bad or it was unable to verify it. The current version of veth will replace CHECKSUM_NONE with CHECKSUM_UNNECESSARY, which causes corrupt packets routed from hardware to a veth device to be delivered to the application. This caused applications at Twitter to receive corrupt data when network hardware was corrupting packets. We believe this was added as an optimization to skip computing and verifying checksums for communication between containers. However, locally generated packets have ip_summed == CHECKSUM_PARTIAL, so the code as written does nothing for them. As far as we can tell, after removing this code, these packets are transmitted from one stack to another unmodified (tcpdump shows invalid checksums on both sides, as expected), and they are delivered correctly to applications. We didn’t test every possible network configuration, but we tried a few common ones such as bridging containers, using NAT between the host and a container, and routing from hardware devices to containers. We have effectively deployed this in production at Twitter (by disabling RX checksum offloading on veth devices). This code dates back to the first version of the driver, commit <e314dbdc1c0dc6a548ecf> ("[NET]: Virtual ethernet device driver"), so I suspect this bug occurred mostly because the driver API has evolved significantly since then. Commit <0b7967503dc97864f283a> ("net/veth: Fix packet checksumming") (in December 2010) fixed this for packets that get created locally and sent to hardware devices, by not changing CHECKSUM_PARTIAL. However, the same issue still occurs for packets coming in from hardware devices. Co-authored-by: Evan Jones <ej@evanjones.ca> Signed-off-by: Evan Jones <ej@evanjones.ca> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Vijay Pandurangan <vijayp@vijayp.ca> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 December 2015, 20:15:34 UTC
a7c09ae Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains two netfilter fixes: 1) Oneliner from Florian to dump missing NFT_CT_L3PROTOCOL netlink attribute, from Florian Westphal. 2) Another oneliner for nf_tables to use skb->protocol from the new netdev family, we can't assume ethernet there. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 22 December 2015, 19:54:13 UTC
987aaad Merge branch 'cdc_ncm-new-Dell-devices' Daniele Palmas says: ==================== net: usb: cdc_ncm: Adding support for two new Dell devices This patch series add support in the cdc_ncm driver for two devices based on the same platform, that are different only for carrier customization. V2: Added comment for highlighting FLAG_NOARP usage for those devices ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 21 December 2015, 19:51:40 UTC
fb83d5f net: usb: cdc_ncm: Adding Dell DW5813 LTE AT&T Mobile Broadband Card Unlike DW5550, Dell DW5813 is a mobile broadband card with no ARP capabilities: the patch makes this device to use wwan_noarp_info struct Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 December 2015, 19:51:14 UTC
670c0d6 net: usb: cdc_ncm: Adding Dell DW5812 LTE Verizon Mobile Broadband Card Unlike DW5550, Dell DW5812 is a mobile broadband card with no ARP capabilities: the patch makes this device to use wwan_noarp_info struct Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 December 2015, 19:51:14 UTC
45af550 natsemi: add checks for dma mapping errors refill_rx() and start_tx() do not check if mapping dma memory succeed. The patch adds the checks and failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2015, 17:58:46 UTC
179ccc0 rhashtable: Kill harmless RCU warning in rhashtable_walk_init The commit c6ff5268293ef98e48a99597e765ffc417e39fa5 ("rhashtable: Fix walker list corruption") causes a suspicious RCU usage warning because we no longer hold ht->mutex when we dereference ht->tbl. However, this is a false positive because we now hold ht->lock which also guarantees that ht->tbl won't disppear from under us. This patch kills the warning by using rcu_dereference_protected. Reported-by: kernel test robot <ying.huang@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> 19 December 2015, 04:44:18 UTC
e905eab openvswitch: correct encoding of set tunnel action attributes In a set action tunnel attributes should be encoded in a nested action. I noticed this because ovs-dpctl was reporting an error when dumping flows due to the incorrect encoding of tunnel attributes in a set action. Fixes: fc4099f17240 ("openvswitch: Fix egress tunnel info.") Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2015, 21:35:35 UTC
ea2465a bnx2x: Prevent FW assertion when using Vxlan FW has a rare corner case in which a fragmented packet using lots of frags would not be linearized, causing the FW to assert while trying to transmit the packet. To prevent this, we need to make sure the window of fragements containing MSS worth of data contains 1 BD less than for regular packets due to the additional parsing BD. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2015, 21:34:32 UTC
6d3c348 ipip: ioctl: Remove superfluous IP-TTL handling. IP-TTL case is already handled in ip_tunnel_ioctl() API. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2015, 21:07:59 UTC
d79f16c mkiss: Fix use after free in mkiss_close(). Need to do the unregister_device() after all references to the driver private have been done. Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2015, 21:03:03 UTC
acf673a 6pack: Fix use after free in sixpack_close(). Need to do the unregister_device() after all references to the driver private have been done. Also we need to use del_timer_sync() for the timers so that we don't have any asynchronous references after the unregister. Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2015, 20:57:33 UTC
6e3cd5f be2net: Avoid accessing eq object in be_msix_register routine, when i < 0. When the first request_irq fails in be_msix_register, i value would be zero. The current code decrements the i value and accesses the eq object without validating the decremented "i" value. This can cause an "invalid memory address access" violation. This patch fixes the problem by accessing the eq object after validating the "i" value. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2015, 20:50:52 UTC
6be842f Merge branch 'mlx4-time-stamping-fixes' Or Gerlitz says: ==================== Mellanox mlx4 driver fixes Two small fixes from Jenny for code flows that deal with time-stamping. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2015, 19:48:04 UTC
9068306 net/mlx4_en: Fix HW timestamp init issue upon system startup mlx4_en_init_timestamp was called before creation of netdev and port init, thus used uninitialized values. Specifically - NIC frequency was incorrect causing wrong calculations and later wrong HW timestamps. Fixes: 1ec4864b1017 ('net/mlx4_en: Fixed crash when port type is changed') Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Marina Varshaver <marinav@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2015, 19:48:04 UTC
fc9f5ea net/mlx4_en: Remove dependency between timestamping capability and service_task Service task is responsible for other tasks in addition to timestamping overflow check. Launch it even if timestamping is not supported by device. Fixes: 07841f9d94c1 ('net/mlx4_en: Schedule napi when RX buffers allocation fails') Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2015, 19:48:03 UTC
62d2b15 Merge branch 'cpsw-fixed-phy-dt-bugs' David Rivshin says: ==================== drivers: net: cpsw: Fix bugs in fixed-link PHY DT parsing Commit 1f71e8c96fc654724723ce987e0a8b2aeb81746d ("drivers: net: cpsw: Add support for fixed-link PHY") added initial fixed-link PHY support for CPSW, but missed a few considerations. This series is based on the tip of the net tree. The first two patches fix user-visible errors in different hardware configurations. The third patch is for an internal reference counting issue. They are logically independent changes, but in the same function, so must be applied in order to apply cleanly. The first patch was originally submitted by Pascal Speck on December 4, but was not picked up by patchwork. I suspect that is because the patch was mangled by the mailer. I fixed the mangling and am including it in this series, as I believe it is the correct change. I have tested on the following hardware configurations: - (EVMSK) dual emac with two real MDIO-connected phys using RGMII-TXID - single emac with fixed-link using RGMII Testing of other CPSW emac configurations that folks may have would be appreciated. Changes from v1 [1]: - Split into 3 smaller patches. - Maintain 1f71e8c96fc6's preference for fixed-link over phy_id if they are both (incorrectly) specified in the slave node. - Update binding documentation to no longer say that phy_mode is also mutually exclusive with fixed-link. - Dropped unnecessary include of phy_fixed.h. [1] https://patchwork.ozlabs.org/patch/554989/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2015, 19:46:06 UTC
dfc0a6d drivers: net: cpsw: increment reference count on fixed-link PHY node When a fixed-link sub-node exists in a slave node, the slave node is also the PHY node. Since this is a separate use of the slave node, of_node_get() should be used to increment the reference count. Fixes: 1f71e8c96fc6 ("drivers: net: cpsw: Add support for fixed-link PHY") Signed-off-by: David Rivshin <drivshin@allworx.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2015, 19:46:06 UTC
f1eea5c drivers: net: cpsw: fix RMII/RGMII mode when used with fixed-link PHY Commit 1f71e8c96fc654724723ce987e0a8b2aeb81746d ("drivers: net: cpsw: Add support for fixed-link PHY") did not parse the "phy-mode" property in the case of a fixed-link PHY, leaving slave_data->phy_if with its default of PHY_INTERFACE_MODE_NA(0). This later gets passed to phy_connect() in cpsw_slave_open(), and eventually to cpsw_phy_sel() where it hits a default case that configures the MAC for MII mode. The user visible symptom is that while kernel log messages seem to indicate that the interface is set up, there is no network communication. Eventually a watchdog error occurs: NETDEV WATCHDOG: eth0 (cpsw): transmit queue 0 timed out Fixes: 1f71e8c96fc6 ("drivers: net: cpsw: Add support for fixed-link PHY") Signed-off-by: David Rivshin <drivshin@allworx.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2015, 19:46:05 UTC
1873c58 ethernet:ti:cpsw: fix phy identification with multiple slaves on fixed-phy When using more than one slave with ti cpsw and fixed phy the pd->phy_id will be always zero, but slave_data->phy_id must be unique. pd->phy_id means a "phy hardware id" whereas slave_data->phy_id means an "unique id", so we should use pd->addr which has the same unique meaning. Fixes: 1f71e8c96fc6 ("drivers: net: cpsw: Add support for fixed-link PHY") Signed-off-by: Pascal Speck <kernel@iktek.de> Signed-off-by: David S. Miller <davem@davemloft.net> 18 December 2015, 19:46:05 UTC
d5f79b6 netfilter: nft_ct: include direction when dumping NFT_CT_L3PROTOCOL key one nft userspace test case fails with 'ct l3proto original ipv4' mismatches 'ct l3proto ipv4' ... because NFTA_CT_DIRECTION attr is missing. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 18 December 2015, 13:45:45 UTC
aa47e42 netfilter: nf_tables: use skb->protocol instead of assuming ethernet header Otherwise we may end up with incorrect network and transport header for other protocols. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 18 December 2015, 13:45:45 UTC
73796d8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix uninitialized variable warnings in nfnetlink_queue, a lot of people reported this... From Arnd Bergmann. 2) Don't init mutex twice in i40e driver, from Jesse Brandeburg. 3) Fix spurious EBUSY in rhashtable, from Herbert Xu. 4) Missing DMA unmaps in mvpp2 driver, from Marcin Wojtas. 5) Fix race with work structure access in pppoe driver causing corruptions, from Guillaume Nault. 6) Fix OOPS due to sh_eth_rx() not checking whether netdev_alloc_skb() actually succeeded or not, from Sergei Shtylyov. 7) Don't lose flags when settifn IFA_F_OPTIMISTIC in ipv6 code, from Bjørn Mork. 8) VXLAN_HD_RCO defined incorrectly, fix from Jiri Benc. 9) Fix clock source used for cookies in SCTP, from Marcelo Ricardo Leitner. 10) aurora driver needs HAS_DMA dependency, from Geert Uytterhoeven. 11) ndo_fill_metadata_dst op of vxlan has to handle ipv6 tunneling properly as well, from Jiri Benc. 12) Handle request sockets properly in xfrm layer, from Eric Dumazet. 13) Double stats update in ipv6 geneve transmit path, fix from Pravin B Shelar. 14) sk->sk_policy[] needs RCU protection, and as a result xfrm_policy_destroy() needs to free policies using an RCU grace period, from Eric Dumazet. 15) SCTP needs to clone ipv6 tx options in order to avoid use after free, from Eric Dumazet. 16) Missing kbuild export if ila.h, from Stephen Hemminger. 17) Missing mdiobus_alloc() return value checking in mdio-mux.c, from Tobias Klauser. 18) Validate protocol value range in ->create() methods, from Hannes Frederic Sowa. 19) Fix early socket demux races that result in illegal dst reuse, from Eric Dumazet. 20) Validate socket address length in pptp code, from WANG Cong. 21) skb_reorder_vlan_header() uses incorrect offset and can corrupt packets, from Vlad Yasevich. 22) Fix memory leaks in nl80211 registry code, from Ola Olsson. 23) Timeout loop count handing fixes in mISDN, xgbe, qlge, sfc, and qlcnic. From Dan Carpenter. 24) msg.msg_iocb needs to be cleared in recvfrom() otherwise, for example, AF_ALG will interpret it as an async call. From Tadeusz Struk. 25) inetpeer_set_addr_v4 forgets to initialize the 'vif' field, from Eric Dumazet. 26) rhashtable enforces the minimum table size not early enough, breaking how we calculate the per-cpu lock allocations. From Herbert Xu. 27) Fix FCC port lockup in 82xx driver, from Martin Roth. 28) FOU sockets need to be freed using RCU, from Hannes Frederic Sowa. 29) Fix out-of-bounds access in __skb_complete_tx_timestamp() and sock_setsockopt() wrt. timestamp handling. From WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (117 commits) net: check both type and procotol for tcp sockets drivers: net: xgene: fix Tx flow control tcp: restore fastopen with no data in SYN packet af_unix: Revert 'lock_interruptible' in stream receive code fou: clean up socket with kfree_rcu 82xx: FCC: Fixing a bug causing to FCC port lock-up gianfar: Don't enable RX Filer if not supported net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration rhashtable: Fix walker list corruption rhashtable: Enforce minimum size on initial hash table inet: tcp: fix inetpeer_set_addr_v4() ipv6: automatically enable stable privacy mode if stable_secret set net: fix uninitialized variable issue bluetooth: Validate socket address length in sco_sock_bind(). net_sched: make qdisc_tree_decrease_qlen() work for non mq ser_gigaset: remove unnecessary kfree() calls from release method ser_gigaset: fix deallocation of platform device structure ser_gigaset: turn nonsense checks into WARN_ON ser_gigaset: fix up NULL checks qlcnic: fix a timeout loop ... 17 December 2015, 22:05:22 UTC
ac5cc97 net: check both type and procotol for tcp sockets Dmitry reported the following out-of-bound access: Call Trace: [<ffffffff816cec2e>] __asan_report_load4_noabort+0x3e/0x40 mm/kasan/report.c:294 [<ffffffff84affb14>] sock_setsockopt+0x1284/0x13d0 net/core/sock.c:880 [< inline >] SYSC_setsockopt net/socket.c:1746 [<ffffffff84aed7ee>] SyS_setsockopt+0x1fe/0x240 net/socket.c:1729 [<ffffffff85c18c76>] entry_SYSCALL_64_fastpath+0x16/0x7a arch/x86/entry/entry_64.S:185 This is because we mistake a raw socket as a tcp socket. We should check both sk->sk_type and sk->sk_protocol to ensure it is a tcp socket. Willem points out __skb_complete_tx_timestamp() needs to fix as well. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 December 2015, 20:46:32 UTC
67894ee drivers: net: xgene: fix Tx flow control Currently the Tx flow control is based on reading the hardware state, which is not accurate since it may not reflect the descriptors that are not yet reached the memory. To accurately control the Tx flow, changing it to be software based. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 December 2015, 20:45:53 UTC
07e100f tcp: restore fastopen with no data in SYN packet Yuchung tracked a regression caused by commit 57be5bdad759 ("ip: convert tcp_sendmsg() to iov_iter primitives") for TCP Fast Open. Some Fast Open users do not actually add any data in the SYN packet. Fixes: 57be5bdad759 ("ip: convert tcp_sendmsg() to iov_iter primitives") Reported-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 December 2015, 20:37:39 UTC
3822b5c af_unix: Revert 'lock_interruptible' in stream receive code With b3ca9b02b00704053a38bfe4c31dbbb9c13595d0, the AF_UNIX SOCK_STREAM receive code was changed from using mutex_lock(&u->readlock) to mutex_lock_interruptible(&u->readlock) to prevent signals from being delayed for an indefinite time if a thread sleeping on the mutex happened to be selected for handling the signal. But this was never a problem with the stream receive code (as opposed to its datagram counterpart) as that never went to sleep waiting for new messages with the mutex held and thus, wouldn't cause secondary readers to block on the mutex waiting for the sleeping primary reader. As the interruptible locking makes the code more complicated in exchange for no benefit, change it back to using mutex_lock. Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 17 December 2015, 20:33:47 UTC
ce42af9 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Some i915 fixes, one omap fix, one core regression fix. Not even enough fixes for a twelve days of xmas song, which seemms good" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Don't overwrite UNVERFIED mode status to OK drm/omap: fix fbdev pix format to support all platforms drm/i915: Do a better job at disabling primary plane in the noatomic case. drm/i915/skl: Double RC6 WRL always on drm/i915/skl: Disable coarse power gating up until F0 drm/i915: Remove incorrect warning in context cleanup 17 December 2015, 19:55:29 UTC
b4b29f9 locking/osq: Fix ordering of node initialisation in osq_lock The Cavium guys reported a soft lockup on their arm64 machine, caused by commit c55a6ffa6285 ("locking/osq: Relax atomic semantics"): mutex_optimistic_spin+0x9c/0x1d0 __mutex_lock_slowpath+0x44/0x158 mutex_lock+0x54/0x58 kernfs_iop_permission+0x38/0x70 __inode_permission+0x88/0xd8 inode_permission+0x30/0x6c link_path_walk+0x68/0x4d4 path_openat+0xb4/0x2bc do_filp_open+0x74/0xd0 do_sys_open+0x14c/0x228 SyS_openat+0x3c/0x48 el0_svc_naked+0x24/0x28 This is because in osq_lock we initialise the node for the current CPU: node->locked = 0; node->next = NULL; node->cpu = curr; and then publish the current CPU in the lock tail: old = atomic_xchg_acquire(&lock->tail, curr); Once the update to lock->tail is visible to another CPU, the node is then live and can be both read and updated by concurrent lockers. Unfortunately, the ACQUIRE semantics of the xchg operation mean that there is no guarantee the contents of the node will be visible before lock tail is updated. This can lead to lock corruption when, for example, a concurrent locker races to set the next field. Fixes: c55a6ffa6285 ("locking/osq: Relax atomic semantics"): Reported-by: David Daney <ddaney@caviumnetworks.com> Reported-by: Andrew Pinski <andrew.pinski@caviumnetworks.com> Tested-by: Andrew Pinski <andrew.pinski@caviumnetworks.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1449856001-21177-1-git-send-email-will.deacon@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 17 December 2015, 19:40:29 UTC
d7637d0 Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: - Two bug fixes for misuse of PAGE_MASK in scatterlist and dma-debug. These are tagged for -stable. The scatterlist impact is potentially corrupted dma addresses on HIGHMEM enabled platforms. - A minor locking fix for the NFIT hot-add implementation that is new in 4.4-rc. This would only trigger in the case a hot-add raced driver removal. * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dma-debug: Fix dma_debug_entry offset calculation Revert "scatterlist: use sg_phys()" nfit: acpi_nfit_notify(): Do not leave device locked 17 December 2015, 19:20:13 UTC
3036fac fou: clean up socket with kfree_rcu fou->udp_offloads is managed by RCU. As it is actually included inside the fou sockets, we cannot let the memory go out of scope before a grace period. We either can synchronize_rcu or switch over to kfree_rcu to manage the sockets. kfree_rcu seems appropriate as it is used by vxlan and geneve. Fixes: 23461551c00628c ("fou: Support for foo-over-udp RX path") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 17 December 2015, 00:03:02 UTC
4d4f379 Merge tag 'mac80211-for-davem-2015-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Another set of fixes: * memory leak fixes (from Ola) * operating mode notification spec compliance fix (from Eyal) * copy rfkill names in case pointer becomes invalid (myself) * two hardware restart fixes (myself) * get rid of "limiting TX power" log spam (myself) ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 23:33:38 UTC
79aa05a 82xx: FCC: Fixing a bug causing to FCC port lock-up The patch fixes FCC port lock-up, which occurs as a result of a bug during underrun/collision handling. Within the tx_startup() function in mac-fcc.c, the address of last BD is not calculated correctly. As a result of wrong calculation of the last BD address, the next transmitted BD may be set to an area out of the transmit BD ring. This actually causes to port lock-up and it is not recoverable. Signed-off-by: Martin Roth <martin.roth@motorolasolutions.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 23:32:35 UTC
7bff47d gianfar: Don't enable RX Filer if not supported After commit 15bf176db1fb ("gianfar: Don't enable the Filer w/o the Parser"), 'TSEC' model controllers (for example as seen on MPC8541E) always have 8 bytes stripped from the front of received frames. Only 'eTSEC' gianfar controllers have the RX Filer capability (amongst other enhancements). Previously this was treated as always enabled for both 'TSEC' and 'eTSEC' controllers. In commit 15bf176db1fb ("gianfar: Don't enable the Filer w/o the Parser") a subtle change was made to the setting of 'uses_rxfcb' to effectively always set it (since 'rx_filer_enable' was always true). This had the side-effect of always stripping 8 bytes from the front of received frames on 'TSEC' type controllers. We now only enable the RX Filer capability on controller types that support it, thereby avoiding the issue for 'TSEC' type controllers. Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz> Reviewed-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 23:31:00 UTC
0354aec dma-debug: Fix dma_debug_entry offset calculation dma-debug uses struct dma_debug_entry to keep track of dma coherent memory allocation requests. The virtual address is converted into a pfn and an offset. Previously, the offset was calculated using an incorrect bit mask. As a result, we saw incorrect error messages from dma-debug like the following: "DMA-API: exceeded 7 overlapping mappings of cacheline 0x03e00000" Cacheline 0x03e00000 does not exist on our platform. Cc: <stable@vger.kernel.org> Fixes: 0abdd7a81b7e ("dma-debug: introduce debug_dma_assert_idle()") Signed-off-by: Daniel Mentz <danielmentz@google.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 16 December 2015, 19:24:26 UTC
a5e90b1 Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: "Further ARM fixes: - Anson Huang noticed that we were corrupting a register we shouldn't be during suspend on some CPUs. - Shengjiu Wang spotted a bug in the 'swp' instruction emulation. - Will Deacon fixed a bug in the ASID allocator. - Laura Abbott fixed the kernel permission protection to apply to all threads running in the system. - I've fixed two bugs with the domain access control register handling, one to do with printing an appropriate value at oops time, and the other to further fix the uaccess_with_memcpy code" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8475/1: SWP emulation: Restore original *data when failed ARM: 8471/1: need to save/restore arm register(r11) when it is corrupted ARM: fix uaccess_with_memcpy() with SW_DOMAIN_PAN ARM: report proper DACR value in oops dumps ARM: 8464/1: Update all mm structures with section adjustments ARM: 8465/1: mm: keep reserved ASIDs in sync with mm after multiple rollovers 16 December 2015, 18:57:24 UTC
7bbadd2 net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration Docbook does not like the definition of macros inside a field declaration and adds a warning. Move the definition out. Fixes: 79462ad02e86180 ("net: add validation for the socket syscall protocol argument") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 16:44:17 UTC
c6ff526 rhashtable: Fix walker list corruption The commit ba7c95ea3870fe7b847466d39a049ab6f156aa2c ("rhashtable: Fix sleeping inside RCU critical section in walk_stop") introduced a new spinlock for the walker list. However, it did not convert all existing users of the list over to the new spin lock. Some continued to use the old mutext for this purpose. This obviously led to corruption of the list. The fix is to use the spin lock everywhere where we touch the list. This also allows us to do rcu_rad_lock before we take the lock in rhashtable_walk_start. With the old mutex this would've deadlocked but it's safe with the new spin lock. Fixes: ba7c95ea3870 ("rhashtable: Fix sleeping inside RCU...") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 16:13:14 UTC
3a32460 rhashtable: Enforce minimum size on initial hash table William Hua <william.hua@canonical.com> wrote: > > I wasn't aware there was an enforced minimum size. I simply set the > nelem_hint in the rhastable_params struct to 1, expecting it to grow as > needed. This caused a segfault afterwards when trying to insert an > element. OK we're doing the size computation before we enforce the limit on min_size. ---8<--- We need to do the initial hash table size computation after we have obtained the correct min_size/max_size parameters. Otherwise we may end up with a hash table whose size is outside the allowed envelope. Fixes: a998f712f77e ("rhashtable: Round up/down min/max_size to...") Reported-by: William Hua <william.hua@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 15:44:08 UTC
887dc9f inet: tcp: fix inetpeer_set_addr_v4() David Ahern added a vif field in the a4 part of inetpeer_addr struct. This broke IPv4 TCP fast open client side and more generally tcp metrics cache, because inetpeer_addr_cmp() is now comparing two u32 instead of one. inetpeer_set_addr_v4() needs to properly init vif field, otherwise the comparison result depends on uninitialized data. Fixes: 192132b9a034 ("net: Add support for VRFs to inetpeer cache") Reported-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 05:14:12 UTC
9b29c69 ipv6: automatically enable stable privacy mode if stable_secret set Bjørn reported that while we switch all interfaces to privacy stable mode when setting the secret, we don't set this mode for new interfaces. This does not make sense, so change this behaviour. Fixes: 622c81d57b392cc ("ipv6: generation of stable privacy addresses for link-local and autoconf") Reported-by: Bjørn Mork <bjorn@mork.no> Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 16 December 2015, 04:37:32 UTC
3e6110f Revert "scatterlist: use sg_phys()" commit db0fa0cb0157 "scatterlist: use sg_phys()" did replacements of the form: phys_addr_t phys = page_to_phys(sg_page(s)); phys_addr_t phys = sg_phys(s) & PAGE_MASK; However, this breaks platforms where sizeof(phys_addr_t) > sizeof(unsigned long). Revert for 4.3 and 4.4 to make room for a combined helper in 4.5. Cc: <stable@vger.kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: db0fa0cb0157 ("scatterlist: use sg_phys()") Suggested-by: Joerg Roedel <joro@8bytes.org> Reported-by: Vitaly Lavrov <vel21ripn@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> 15 December 2015, 20:54:06 UTC
130ed5d net: fix uninitialized variable issue msg_iocb needs to be initialized on the recv/recvfrom path. Otherwise afalg will wrongly interpret it as an async call. Cc: stable@vger.kernel.org Reported-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 20:46:48 UTC
5233252 bluetooth: Validate socket address length in sco_sock_bind(). Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 20:39:08 UTC
edb42dc Merge tag 'dmaengine-fix-4.4-rc6' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "This has fixes spread thru driver, notably among them: - edma fixes for recent edma DT changes which went into 4.4 - odd fixes for at_hdmac - minor fixes on bc dma and mic dma" * tag 'dmaengine-fix-4.4-rc6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: at_xdmac: fix at_xdmac_prep_dma_memcpy() dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type dmaengine: mic_x100: add missing spin_unlock dmaengine: bcm2835-dma: Convert to use DMA pool dmaengine: at_xdmac: fix bad behavior in interleaved mode dmaengine: at_xdmac: fix false condition for memset_sg transfers dmaengine: at_xdmac: fix macro typo 15 December 2015, 18:56:39 UTC
8c2b759 Merge tag 'fbdev-fixes-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull two fbdev fixes from Tomi Valkeinen: - OMAP: fix analog tv-out when using omapdrm - fsl: Fix kernel crash when diu_ops is not implemented * tag 'fbdev-fixes-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: OMAPDSS: fix timings for VENC to match what omapdrm expects video: fbdev: fsl: Fix kernel crash when diu_ops is not implemented 15 December 2015, 18:50:13 UTC
5fab517 Merge tag 'please-pull-mlock2' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 fix from Tony Luck: "Wire up mlock2() syscall for ia64" * tag 'please-pull-mlock2' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Enable mlock2 syscall for ia64 15 December 2015, 18:45:29 UTC
225734d net_sched: make qdisc_tree_decrease_qlen() work for non mq Stas Nichiporovich reported a regression in his HFSC qdisc setup on a non multi queue device. It turns out I mistakenly added a TCQ_F_NOPARENT flag on all qdisc allocated in qdisc_create() for non multi queue devices, which was rather buggy. I was clearly mislead by the TCQ_F_ONETXQUEUE that is also set here for no good reason, since it only matters for the root qdisc. Fixes: 4eaf3b84f288 ("net_sched: fix qdisc_tree_decrease_qlen() races") Reported-by: Stas Nichiporovich <stasn77@gmail.com> Tested-by: Stas Nichiporovich <stasn77@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 18:41:52 UTC
58ab367 Merge branch 'ser_gigaset-platform-device-dealloc' Paul Bolle says: ==================== ser_gigaset: fix deallocation of platform device structure Sascha Levin reported that the syzkaller fuzzer triggered a WARNING in ser_gigaset (see https://lkml.kernel.org/g/56587467.8050102@oracle.com ). It turned out that ser_gigaset has always deallocated its platform device structure incorrectly. Tilman submitted the patch that fixes that (3/4) and a related cleanup (4/4). Tilman also submitted a minor cleanup of some NULL checks (1/4) that prompted Alan to turn those checks into WARN_ONs (2/4). If no one hits these WARN_ONs in the next couple of releases these WARN_ONs should be removed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 18:24:22 UTC
8aeb3c3 ser_gigaset: remove unnecessary kfree() calls from release method device->platform_data and platform_device->resource are never used and remain NULL through their entire life. Drops the kfree() calls for them from the device release method. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 18:24:21 UTC
4c5e354 ser_gigaset: fix deallocation of platform device structure When shutting down the device, the struct ser_cardstate must not be kfree()d immediately after the call to platform_device_unregister() since the embedded struct platform_device is still in use. Move the kfree() call to the release method instead. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Fixes: 2869b23e4b95 ("drivers/isdn/gigaset: new M101 driver (v2)") Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 18:24:21 UTC
ede03d3 ser_gigaset: turn nonsense checks into WARN_ON These checks do nothing useful to protect the code from races. On the other hand if the old code has been masking a real bug we would like to know about it. The check for tiocmset is kept because it is valid for a tty driver to have a NULL tiocmset method. That in itself is probably a mistake given modern coding practices - but needs fixing in the tty layer. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 18:24:21 UTC
74375c0 ser_gigaset: fix up NULL checks Commit f34d7a5b7010 ("tty: The big operations rework") changed tty->driver to tty->ops but left NULL checks for tty->driver untouched. Fix. Signed-off-by: Tilman Schmidt <tilman@imap.cc> [pebolle: removed Fixes tag] Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 18:24:20 UTC
ca43444 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a boundary condition in the blkcipher SG walking code that can lead to a crash when used with the new chacha20 algorithm" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: skcipher - Copy iv from desc even for 0-len walks 15 December 2015, 18:21:04 UTC
173ae9b Fix user-visible spelling error Pavel Machek reports a warning about W+X pages found in the "Persisent" kmap area. After grepping for it (using the correct spelling), and not finding it, I noticed how the debug printk was just misspelled. Fix it. The actual mapping bug that Pavel reported is still open. It's apparently a separate issue from the known EFI page tables, looks like it's related to the HIGHMEM mappings. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 December 2015, 18:15:57 UTC
389e4e0 qlcnic: fix a timeout loop The problem here is that at the end of the loop we test for if idc->vnic_wait_limit is zero, but since idc->vnic_wait_limit-- is a post-op, it actually ends up set to (u8)-1. I have fixed this by moving the decrement inside the loop. Fixes: 486a5bc77a4a ('qlcnic: Add support for 83xx suspend and resume.') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 18:11:05 UTC
fe0be35 sfc: fix a timeout loop We test for if "tries" is zero at the end but "tries--" is a post-op so it will end with "tries" set to -1. I have changed it to a pre-op instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 17:46:26 UTC
351434c qlge: fix a timeout loop in ql_change_rx_buffers() The problem here is that after the loop we test for "if (!i) " but because "i--" is a post-op we exit with i set to -1. I have fixed this by changing it to a pre-op instead. I had to change the starting value from 3 to 4 so that we still iterate 3 times. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 17:46:03 UTC
c7557e6 amd-xgbe: fix a couple timeout loops At the end of the loop we test "if (!count)" but because "count--" is a post-op then the loop will end with count set to -1. I have fixed this by changing it to --count. Fixes: c5aa9e3b8156 ('amd-xgbe: Initial AMD 10GbE platform driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 17:43:01 UTC
40d24c4 mISDN: fix a loop count There are two issue here. 1) cnt starts as maxloop + 1 so all these loops iterate one more time than intended. 2) At the end of the loop we test for "if (maxloop && !cnt)" but for the first two loops, we end with cnt equal to -1. Changing this to a pre-op means we end with cnt set to 0. Fixes: cae86d4a4e56 ('mISDN: Add driver for Infineon ISDN chipset family') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 17:42:27 UTC
2b2b31c net/mlx4_core: fix handling return value of mlx4_slave_convert_port The function can return negative values, so its result should be assigned to signed variable. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Fixes: fc48866f7 ('net/mlx4: Adapt code for N-Port VF') Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 16:54:43 UTC
cf1e05c mac80211: handle width changes from opmode notification IE in beacon An AP can send an operating channel width change in a beacon opmode notification IE as long as there's a change in the nss as well (See 802.11ac-2013 section 10.41). So don't limit updating to nss only from an opmode notification IE. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> 15 December 2015, 12:16:47 UTC
a87da0c mac80211: suppress unchanged "limiting TX power" messages When the AP is advertising limited TX power, the message can be printed over and over again. Suppress it when the power level isn't changing. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=106011 Signed-off-by: Johannes Berg <johannes.berg@intel.com> 15 December 2015, 12:14:04 UTC
1ea2c86 mac80211: reprogram in interface order During reprogramming, mac80211 currently first adds all the channel contexts, then binds them to the vifs and then goes to reconfigure all the interfaces. Drivers might, perhaps implicitly, rely on the operation order for certain things that typically happen within a single function elsewhere in mac80211. To avoid problems with that, reorder the code in mac80211's restart/reprogramming to work fully within the interface loop so that the order of operations is like in normal operation. For iwlwifi, this fixes a firmware crash when reprogramming with an AP/GO interface active. Reported-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> 15 December 2015, 12:13:59 UTC
74430f9 mac80211: run scan completed work on reconfig failure When reconfiguration during resume fails while a scan is pending for completion work, that work will never run, and the scan will be stuck forever. Factor out the code to recover this and call it also in ieee80211_handle_reconfig_failure(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> 15 December 2015, 12:12:50 UTC
707554b nl80211: Fix potential memory leak in nl80211_connect Free cached keys if the last early return path is taken. Signed-off-by: Ola Olsson <ola.olsson@sonymobile.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> 15 December 2015, 12:11:26 UTC
e5dbe07 nl80211: Fix potential memory leak in nl80211_set_wowlan Compared to cfg80211_rdev_free_wowlan in core.h, the error goto label lacks the freeing of nd_config. Fix that. Signed-off-by: Ola Olsson <ola.olsson@sonymobile.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> 15 December 2015, 12:10:05 UTC
09d1180 nl80211: fix a few memory leaks in reg.c The first leak occurs when entering the default case in the switch for the initiator in set_regdom. The second leaks a platform_device struct if the platform registration in regulatory_init succeeds but the sub sequent regulatory hint fails due to no memory. Signed-off-by: Ola Olsson <ola.olsson@sonymobile.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> 15 December 2015, 12:08:02 UTC
34bfbae ARM: 8475/1: SWP emulation: Restore original *data when failed __user_swpX_asm maybe failed in first STREX operation, emulate_swpX will try again, but the *data has been changed in first time. which causes the result is wrong. This patch is to fix this issue. When STREX succeed, change the *data. if it fail, *data is not changed. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 15 December 2015, 11:51:42 UTC
fa0708b ARM: 8471/1: need to save/restore arm register(r11) when it is corrupted In cpu_v7_do_suspend routine, r11 is used while it is NOT saved/restored, different compiler may have different usage of ARM general registers, so it may cause issues during calling cpu_v7_do_suspend. We meet kernel fault occurs when using GCC 4.8.3, r11 contains valid value before calling into cpu_v7_do_suspend, but when returned from this routine, r11 is corrupted and lead to kernel fault. Doing save/restore for those corrupted registers is a must in assemble code. Signed-off-by: Anson Huang <Anson.Huang@freescale.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Cc: <stable@vger.kernel.org> # v3.3+ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 15 December 2015, 11:51:41 UTC
c014953 ARM: fix uaccess_with_memcpy() with SW_DOMAIN_PAN The uaccess_with_memcpy() code is currently incompatible with the SW PAN code: it takes locks within the region that we've changed the DACR, potentially sleeping as a result. As we do not save and restore the DACR across co-operative sleep events, can lead to an incorrect DACR value later in this code path. Reported-by: Peter Rosin <peda@axentia.se> Tested-by: Peter Rosin <peda@axentia.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 15 December 2015, 11:51:02 UTC
f654861 skbuff: Fix offset error in skb_reorder_vlan_header skb_reorder_vlan_header is called after the vlan header has been pulled. As a result the offset of the begining of the mac header has been incrased by 4 bytes (VLAN_HLEN). When moving the mac addresses, include this incrase in the offset calcualation so that the mac addresses are copied correctly. Fixes: a6e18ff1117 (vlan: Fix untag operations of stacked vlans with REORDER_HEADER off) CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Vladislav Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 05:30:41 UTC
09ccfd2 pptp: verify sockaddr_len in pptp_bind() and pptp_connect() Reported-by: Dmitry Vyukov <dvyukov@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 05:29:34 UTC
5449996 ravb: Add disable 10base Ethernet AVB does not support 10 Mbps transfer speed. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 05:26:31 UTC
1299653 sh_eth: fix descriptor access endianness The driver never calls cpu_to_edmac() when writing the descriptor address and edmac_to_cpu() when reading it, although it should -- fix this. Note that the frame/buffer length descriptor field accesses also need fixing but since they are both 16-bit we can't use {cpu|edmac}_to_{edmac|cpu}()... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 05:25:00 UTC
3e23099 sh_eth: fix TX buffer byte-swapping For the little-endian SH771x kernels the driver has to byte-swap the RX/TX buffers, however yet unset physcial address from the TX descriptor is used to call sh_eth_soft_swap(). Use 'skb->data' instead... Fixes: 31fcb99d9958 ("net: sh_eth: remove __flush_purge_region") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 05:25:00 UTC
5037e9e net: fix IP early demux races David Wilder reported crashes caused by dst reuse. <quote David> I am seeing a crash on a distro V4.2.3 kernel caused by a double release of a dst_entry. In ipv4_dst_destroy() the call to list_empty() finds a poisoned next pointer, indicating the dst_entry has already been removed from the list and freed. The crash occurs 18 to 24 hours into a run of a network stress exerciser. </quote> Thanks to his detailed report and analysis, we were able to understand the core issue. IP early demux can associate a dst to skb, after a lookup in TCP/UDP sockets. When socket cache is not properly set, we want to store into sk->sk_dst_cache the dst for future IP early demux lookups, by acquiring a stable refcount on the dst. Problem is this acquisition is simply using an atomic_inc(), which works well, unless the dst was queued for destruction from dst_release() noticing dst refcount went to zero, if DST_NOCACHE was set on dst. We need to make sure current refcount is not zero before incrementing it, or risk double free as David reported. This patch, being a stable candidate, adds two new helpers, and use them only from IP early demux problematic paths. It might be possible to merge in net-next skb_dst_force() and skb_dst_force_safe(), but I prefer having the smallest patch for stable kernels : Maybe some skb_dst_force() callers do not expect skb->dst can suddenly be cleared. Can probably be backported back to linux-3.6 kernels Reported-by: David J. Wilder <dwilder@us.ibm.com> Tested-by: David J. Wilder <dwilder@us.ibm.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 December 2015, 04:52:00 UTC
4655a12 drm: Don't overwrite UNVERFIED mode status to OK The way the mode probing works is this: 1. All modes currently on the mode list are marked as UNVERIFIED 2. New modes are on the probed_modes list (they start with status OK) 3. Modes are moved from the probed_modes list to the actual mode list. If a mode already on the mode list is deemed to match one of the probed modes, the duplicate is dropped and the mode status updated to OK. After this the probed_modes list will be empty. 4. All modes on the mode list are verified to not violate any constraints. Any that do are marked as such. 5. Any mode left with a non-OK status is pruned from the list, with an appropriate debug message. What all this means is that any mode on the original list that didn't have a duplicate on the probed_modes list, should be left with status UNVERFIED (or previously could have been left with some other status, but never OK). I broke that in commit 05acaec334fc ("drm: Reorganize probed mode validation") by always assigning something to the mode->status during the validation step. So any mode from the old list that still passed the validation would be left on the list with status OK in the end. Fix this by not doing the basic mode validation unless the mode already has status OK (meaning it came from the probed_modes list, or at least a duplicate of it was on that list). This way we will correctly prune away any mode from the old mode list that didn't appear on the probed_modes list. Cc: stable@vger.kernel.org Cc: Adam Jackson <ajax@redhat.com> Fixes: 05acaec334fc ("drm: Reorganize probed mode validation") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1449177255-9515-2-git-send-email-ville.syrjala@linux.intel.com Testcase: igt/kms_force_connector_basic/prune-stale-modes Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93332 [danvet: Also applying to drm-misc to avoid too much conflict hell - there's a big pile of patches from Ville on top of this one.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> 15 December 2015, 01:00:10 UTC
2344164 Merge tag 'drm-intel-fixes-2015-12-11' of git://anongit.freedesktop.org/drm-intel into drm-fixes Here are some i915 fixes for v4.4, sorry for being late this week. * tag 'drm-intel-fixes-2015-12-11' of git://anongit.freedesktop.org/drm-intel: drm/i915: Do a better job at disabling primary plane in the noatomic case. drm/i915/skl: Double RC6 WRL always on drm/i915/skl: Disable coarse power gating up until F0 drm/i915: Remove incorrect warning in context cleanup 15 December 2015, 00:25:21 UTC
8e13c10 Merge tag 'omapdrm-4.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-fixes omapdrm fix for 4.4 * tag 'omapdrm-4.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: drm/omap: fix fbdev pix format to support all platforms 15 December 2015, 00:24:52 UTC
2274d37 sh_eth: uninline sh_eth_{write|read}() Commit 3365711df024 ("sh_eth: WARN on access to a register not implemented in in a particular chip") added WARN_ON() to sh_eth_{read|write}(), thus making it unacceptable for these functions to be *inline* anymore. Remove *inline* and move the functions from the header to the driver itself. Below is our code economy with ARM gcc 4.7.3: $ size drivers/net/ethernet/renesas/sh_eth.o{~,} text data bss dec hex filename 32489 1140 0 33629 835d drivers/net/ethernet/renesas/sh_eth.o~ 25413 1140 0 26553 67b9 drivers/net/ethernet/renesas/sh_eth.o Suggested-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 December 2015, 21:25:21 UTC
d856c16 stmmac: dwmac-sunxi: Call exit cleanup function in probe error path dwmac-sunxi has 2 callbacks that were called from stmmac_platform as part of the probe and remove sequences. Ater the conversion of dwmac-sunxi into a standalone platform driver, the .init function is called before calling into the stmmac driver core, but .exit is not called to clean up if stmmac returns an error. This patch fixes the probe error path. This properly cleans up and releases resources when the driver core fails to probe. Cc: Joachim Eastwood <manabian@gmail.com> Fixes: 9a9e9a1edee8 ("stmmac: dwmac-sunxi: turn setup callback into a probe function") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net> 14 December 2015, 21:11:59 UTC
79462ad net: add validation for the socket syscall protocol argument 郭永刚 reported that one could simply crash the kernel as root by using a simple program: int socket_fd; struct sockaddr_in addr; addr.sin_port = 0; addr.sin_addr.s_addr = INADDR_ANY; addr.sin_family = 10; socket_fd = socket(10,3,0x40000000); connect(socket_fd , &addr,16); AF_INET, AF_INET6 sockets actually only support 8-bit protocol identifiers. inet_sock's skc_protocol field thus is sized accordingly, thus larger protocol identifiers simply cut off the higher bits and store a zero in the protocol fields. This could lead to e.g. NULL function pointer because as a result of the cut off inet_num is zero and we call down to inet_autobind, which is NULL for raw sockets. kernel: Call Trace: kernel: [<ffffffff816db90e>] ? inet_autobind+0x2e/0x70 kernel: [<ffffffff816db9a4>] inet_dgram_connect+0x54/0x80 kernel: [<ffffffff81645069>] SYSC_connect+0xd9/0x110 kernel: [<ffffffff810ac51b>] ? ptrace_notify+0x5b/0x80 kernel: [<ffffffff810236d8>] ? syscall_trace_enter_phase2+0x108/0x200 kernel: [<ffffffff81645e0e>] SyS_connect+0xe/0x10 kernel: [<ffffffff81779515>] tracesys_phase2+0x84/0x89 I found no particular commit which introduced this problem. CVE: CVE-2015-8543 Cc: Cong Wang <cwang@twopensource.com> Reported-by: 郭永刚 <guoyonggang@360.cn> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 14 December 2015, 21:09:30 UTC
20b08e1 net: phy: mdio-mux: Check return value of mdiobus_alloc() mdiobus_alloc() might return NULL, but its return value is not checked in mdio_mux_init(). This could potentially lead to a NULL pointer dereference. Fix it by checking the return value Fixes: 0ca2997d1452 ("netdev/of/phy: Add MDIO bus multiplexer support.") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 14 December 2015, 19:27:40 UTC
e5f5d74 openvswitch: fix trivial comment typo The commit 33db4125ec74 ("openvswitch: Rename LABEL->LABELS") left over an old OVS_CT_ATTR_LABEL instance, fix it. Fixes: 33db4125ec74 ("openvswitch: Rename LABEL->LABELS") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net> 14 December 2015, 19:00:09 UTC
2780188 [IA64] Enable mlock2 syscall for ia64 New system call added in commit a8ca5d0ecbdde5cc3d7accacbd69968b0c98764e mm: mlock: add new mlock system call Signed-off-by: Tony Luck <tony.luck@intel.com> 14 December 2015, 18:30:02 UTC
9e5be5b Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== netfilter fixes for net The following patchset contains Netfilter fixes for you net tree, specifically for nf_tables and nfnetlink_queue, they are: 1) Avoid a compilation warning in nfnetlink_queue that was introduced in the previous merge window with the simplification of the conntrack integration, from Arnd Bergmann. 2) nfnetlink_queue is leaking the pernet subsystem registration from a failure path, patch from Nikolay Borisov. 3) Pass down netns pointer to batch callback in nfnetlink, this is the largest patch and it is not a bugfix but it is a dependency to resolve a splat in the correct way. 4) Fix a splat due to incorrect socket memory accounting with nfnetlink skbuff clones. 5) Add missing conntrack dependencies to NFT_DUP_IPV4 and NFT_DUP_IPV6. 6) Traverse the nftables commit list in reverse order from the commit path, otherwise we crash when the user applies an incremental update via 'nft -f' that deletes an object that was just introduced in this batch, from Xin Long. Regarding the compilation warning fix, many people have sent us (and keep sending us) patches to address this, that's why I'm including this batch even if this is not critical. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 14 December 2015, 16:09:01 UTC
1d977b0 drm/omap: fix fbdev pix format to support all platforms omap_fbdev always creates a framebuffer with ARGB8888 pixel format. On OMAP3 we have VIDEO1 overlay that does not support ARGB8888, and on OMAP2 none of the overlays support ARGB888. This patch changes the omap_fbdev's fb to XRGB8888, which is supported by all platforms. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 14 December 2015, 08:00:22 UTC
7f49e7a net: Flush local routes when device changes vrf association The VRF driver cycles netdevs when an interface is enslaved or released: the down event is used to flush neighbor and route tables and the up event (if the interface was already up) effectively moves local and connected routes to the proper table. As of 4f823defdd5b the local route is left hanging around after a link down, so when a netdev is moved from one VRF to another (or released from a VRF altogether) local routes are left in the wrong table. Fix by handling the NETDEV_CHANGEUPPER event. When the upper dev is an L3mdev then call fib_disable_ip to flush all routes, local ones to. Fixes: 4f823defdd5b ("ipv4: fix to not remove local route on link down") Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 December 2015, 04:58:44 UTC
98900a8 net:hns: print MAC with %pM printf() has a dedicated specifier to print MAC addresses. Use it instead of pushing each byte via stack. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 December 2015, 04:36:55 UTC
946973a net:hns: annotate IO address space properly Mark address pointer with __iomem in the IO accessors. Otherwise we will get a sparse complain like following .../hns/hns_dsaf_reg.h:991:36: warning: incorrect type in argument 1 (different address spaces) .../hns/hns_dsaf_reg.h:991:36: expected unsigned char [noderef] [usertype] <asn:2>*base .../hns/hns_dsaf_reg.h:991:36: got void *base Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 December 2015, 04:36:55 UTC
9f9499a Linux 4.4-rc5 14 December 2015, 01:42:58 UTC
dfd01f0 sched/wait: Fix the signal handling fix Jan Stancek reported that I wrecked things for him by fixing things for Vladimir :/ His report was due to an UNINTERRUPTIBLE wait getting -EINTR, which should not be possible, however my previous patch made this possible by unconditionally checking signal_pending(). We cannot use current->state as was done previously, because the instruction after the store to that variable it can be changed. We must instead pass the initial state along and use that. Fixes: 68985633bccb ("sched/wait: Fix signal handling in bit wait helpers") Reported-by: Jan Stancek <jstancek@redhat.com> Reported-by: Chris Mason <clm@fb.com> Tested-by: Jan Stancek <jstancek@redhat.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Tested-by: Chris Mason <clm@fb.com> Reviewed-by: Paul Turner <pjt@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: tglx@linutronix.de Cc: Oleg Nesterov <oleg@redhat.com> Cc: hpa@zytor.com Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 13 December 2015, 22:30:59 UTC
a907e36 netfilter: nf_tables: use reverse traversal commit_list in nf_tables_abort When we use 'nft -f' to submit rules, it will build multiple rules into one netlink skb to send to kernel, kernel will process them one by one. meanwhile, it add the trans into commit_list to record every commit. if one of them's return value is -EAGAIN, status |= NFNL_BATCH_REPLAY will be marked. after all the process is done. it will roll back all the commits. now kernel use list_add_tail to add trans to commit, and use list_for_each_entry_safe to roll back. which means the order of adding and rollback is the same. that will cause some cases cannot work well, even trigger call trace, like: 1. add a set into table foo [return -EAGAIN]: commit_list = 'add set trans' 2. del foo: commit_list = 'add set trans' -> 'del set trans' -> 'del tab trans' then nf_tables_abort will be called to roll back: firstly process 'add set trans': case NFT_MSG_NEWSET: trans->ctx.table->use--; list_del_rcu(&nft_trans_set(trans)->list); it will del the set from the table foo, but it has removed when del table foo [step 2], then the kernel will panic. the right order of rollback should be: 'del tab trans' -> 'del set trans' -> 'add set trans'. which is opposite with commit_list order. so fix it by rolling back commits with reverse order in nf_tables_abort. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 13 December 2015, 21:47:32 UTC
fc89182 Merge tag 'nfs-for-4.4-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfix from Trond Myklebust: "SUNRPC: Fix a NFSv4.1 callback channel regression" * tag 'nfs-for-4.4-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Fix callback channel 13 December 2015, 20:46:04 UTC
dec9cbf Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixlets from Thomas Gleixner: "Two trivial fixes which add missing header fileas and forward declarations so the code will compile even when the magic include chains are different" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Add missing include for barrier.h irqchip/gic-v3: Add missing struct device_node declaration 13 December 2015, 20:41:10 UTC
43afc99 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix to unbreak a clocksource driver which has more than 32bit counter width" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Mmio: remove artificial 32bit limitation 13 December 2015, 20:36:23 UTC
back to top