Skip to main content

Browse the archive

https://github.com/torvalds/linux
27 March 2024, 02:37:15 UTC
sort by:
Revision Author Date Message Commit Date
f2ce106 Linus Torvalds 19 November 2018, 17:24:04 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix some potentially uninitialized variables and use-after-free in kvaser_usb can drier, from Jimmy Assarsson. 2) Fix leaks in qed driver, from Denis Bolotin. 3) Socket leak in l2tp, from Xin Long. 4) RSS context allocation fix in bnxt_en from Michael Chan. 5) Fix cxgb4 build errors, from Ganesh Goudar. 6) Route leaks in ipv6 when removing exceptions, from Xin Long. 7) Memory leak in IDR allocation handling of act_pedit, from Davide Caratti. 8) Use-after-free of bridge vlan stats, from Nikolay Aleksandrov. 9) When MTU is locked, do not force DF bit on ipv4 tunnels. From Sabrina Dubroca. 10) When NAPI cached skb is reused, we must set it to the proper initial state which includes skb->pkt_type. From Eric Dumazet. 11) Lockdep and non-linear SKB handling fix in tipc from Jon Maloy. 12) Set RX queue properly in various tuntap receive paths, from Matthew Cover. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) tuntap: fix multiqueue rx ipv6: Fix PMTU updates for UDP/raw sockets in presence of VRF tipc: don't assume linear buffer when reading ancillary data tipc: fix lockdep warning when reinitilaizing sockets net-gro: reset skb->pkt_type in napi_reuse_skb() tc-testing: tdc.py: Guard against lack of returncode in executed command tc-testing: tdc.py: ignore errors when decoding stdout/stderr ip_tunnel: don't force DF when MTU is locked MAINTAINERS: Add entry for CAKE qdisc net: bridge: fix vlan stats use-after-free on destruction socket: do a generic_file_splice_read when proto_ops has no splice_read net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs Revert "net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs" net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs net/sched: act_pedit: fix memory leak when IDR allocation fails net: lantiq: Fix returned value in case of error in 'xrx200_probe()' ipv6: fix a dst leak when removing its exception net: mvneta: Don't advertise 2.5G modes drivers/net/ethernet/qlogic/qed/qed_rdma.h: fix typo net/mlx4: Fix UBSAN warning of signed integer overflow ... 19 November 2018, 17:24:04 UTC
8ebebcb Matthew Cover 18 November 2018, 07:46:00 UTC tuntap: fix multiqueue rx When writing packets to a descriptor associated with a combined queue, the packets should end up on that queue. Before this change all packets written to any descriptor associated with a tap interface end up on rx-0, even when the descriptor is associated with a different queue. The rx traffic can be generated by either of the following. 1. a simple tap program which spins up multiple queues and writes packets to each of the file descriptors 2. tx from a qemu vm with a tap multiqueue netdev The queue for rx traffic can be observed by either of the following (done on the hypervisor in the qemu case). 1. a simple netmap program which opens and reads from per-queue descriptors 2. configuring RPS and doing per-cpu captures with rxtxcpu Alternatively, if you printk() the return value of skb_get_rx_queue() just before each instance of netif_receive_skb() in tun.c, you will get 65535 for every skb. Calling skb_record_rx_queue() to set the rx queue to the queue_index fixes the association between descriptor and rx queue. Signed-off-by: Matthew Cover <matthew.cover@stackpath.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 November 2018, 03:05:43 UTC
7ddacfa David Ahern 18 November 2018, 18:45:30 UTC ipv6: Fix PMTU updates for UDP/raw sockets in presence of VRF Preethi reported that PMTU discovery for UDP/raw applications is not working in the presence of VRF when the socket is not bound to a device. The problem is that ip6_sk_update_pmtu does not consider the L3 domain of the skb device if the socket is not bound. Update the function to set oif to the L3 master device if relevant. Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack") Reported-by: Preethi Ramachandra <preethir@juniper.net> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 19 November 2018, 03:02:56 UTC
9ff0119 Linus Torvalds 18 November 2018, 21:33:44 UTC Linux 4.20-rc3 18 November 2018, 21:33:44 UTC
25e19c1 Linus Torvalds 18 November 2018, 20:21:09 UTC Merge tag 'libnvdimm-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A small batch of fixes for v4.20-rc3. The overflow continuation fix addresses something that has been broken for several releases. Arguably it could wait even longer, but it's a one line fix and this finishes the last of the known address range scrub bug reports. The revert addresses a lockdep regression. The unit tests are not critical to fix, but no reason to hold this fix back. Summary: - Address Range Scrub overflow continuation handling has been broken since it was initially merged. It was only recently that error injection and platform-BIOS support enabled this corner case to be exercised. - The recent attempt to provide more isolation for the kernel Address Range Scrub state machine from userapace initiated sessions triggers a lockdep report. Revert and try again at the next merge window. - Fix a kasan reported buffer overflow in libnvdimm unit test infrastrucutre (nfit_test)" * tag 'libnvdimm-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: Revert "acpi, nfit: Further restrict userspace ARS start requests" acpi, nfit: Fix ARS overflow continuation tools/testing/nvdimm: Fix the array size for dimm devices. 18 November 2018, 20:21:09 UTC
c67a98c Linus Torvalds 18 November 2018, 19:31:26 UTC Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "16 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/memblock.c: fix a typo in __next_mem_pfn_range() comments mm, page_alloc: check for max order in hot path scripts/spdxcheck.py: make python3 compliant tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn mm/vmstat.c: fix NUMA statistics updates mm/gup.c: fix follow_page_mask() kerneldoc comment ocfs2: free up write context when direct IO failed scripts/faddr2line: fix location of start_kernel in comment mm: don't reclaim inodes with many attached pages mm, memory_hotplug: check zone_movable in has_unmovable_pages mm/swapfile.c: use kvzalloc for swap_info_struct allocation MAINTAINERS: update OMAP MMC entry hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444! kernel/sched/psi.c: simplify cgroup_move_task() z3fold: fix possible reclaim races 18 November 2018, 19:31:26 UTC
03582f3 Linus Torvalds 18 November 2018, 18:58:20 UTC Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Fix an exec() related scalability/performance regression, which was caused by incorrectly calculating load and migrating tasks on exec() when they shouldn't be" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix cpu_util_wake() for 'execl' type workloads 18 November 2018, 18:58:20 UTC
b53e27f Linus Torvalds 18 November 2018, 18:54:59 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Fix uncore PMU enumeration for CofeeLake CPUs" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Support CoffeeLake 8th CBOX perf/x86/intel/uncore: Add more IMC PCI IDs for KabyLake and CoffeeLake CPUs 18 November 2018, 18:54:59 UTC
743a486 Linus Torvalds 18 November 2018, 18:52:26 UTC Merge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Misc fixes: two warning splat fixes, a leak fix and persistent memory allocation fixes for ARM" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Permit calling efi_mem_reserve_persistent() from atomic context efi/arm: Defer persistent reservations until after paging_init() efi/arm/libstub: Pack FDT after populating it efi/arm: Revert deferred unmap of early memmap mapping efi: Fix debugobjects warning on 'efi_rts_work' 18 November 2018, 18:52:26 UTC
cfaa9f0 Linus Torvalds 18 November 2018, 18:45:09 UTC Merge branch 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM spectre updates from Russell King: "These are the currently known final bits that resolve the Spectre issues. big.Little systems used to be sufficiently identical in that there were no differences between individual CPUs in the system that mattered to the kernel. With the advent of the Spectre problem, the CPUs now have differences in how the workaround is applied. As a result of previous Spectre patches, these systems ended up reporting quite a lot of: "CPUx: Spectre v2: incorrect context switching function, system vulnerable" messages due to the action of the big.Little switcher causing the CPUs to be re-initialised regularly. This series resolves that issue by making the CPU vtable unique to each CPU. However, since this is used very early, before per-cpu is setup, per-cpu can't be used. We also have a problem that two of the methods are not called from preempt-safe paths, but thankfully these remain identical between all CPUs in the system. To make sure, we validate that these are identical during boot" * 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: spectre-v2: per-CPU vtables to work around big.Little systems ARM: add PROC_VTABLE and PROC_TABLE macros ARM: clean up per-processor check_bugs method call ARM: split out processor lookup ARM: make lookup_processor_type() non-__init 18 November 2018, 18:45:09 UTC
45e7981 Chen Chang 16 November 2018, 23:08:57 UTC mm/memblock.c: fix a typo in __next_mem_pfn_range() comments Link: http://lkml.kernel.org/r/20181107100247.13359-1-rainccrun@gmail.com Signed-off-by: Chen Chang <rainccrun@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:10 UTC
c63ae43 Michal Hocko 16 November 2018, 23:08:53 UTC mm, page_alloc: check for max order in hot path Konstantin has noticed that kvmalloc might trigger the following warning: WARNING: CPU: 0 PID: 6676 at mm/vmstat.c:986 __fragmentation_index+0x54/0x60 [...] Call Trace: fragmentation_index+0x76/0x90 compaction_suitable+0x4f/0xf0 shrink_node+0x295/0x310 node_reclaim+0x205/0x250 get_page_from_freelist+0x649/0xad0 __alloc_pages_nodemask+0x12a/0x2a0 kmalloc_large_node+0x47/0x90 __kmalloc_node+0x22b/0x2e0 kvmalloc_node+0x3e/0x70 xt_alloc_table_info+0x3a/0x80 [x_tables] do_ip6t_set_ctl+0xcd/0x1c0 [ip6_tables] nf_setsockopt+0x44/0x60 SyS_setsockopt+0x6f/0xc0 do_syscall_64+0x67/0x120 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 the problem is that we only check for an out of bound order in the slow path and the node reclaim might happen from the fast path already. This is fixable by making sure that kvmalloc doesn't ever use kmalloc for requests that are larger than KMALLOC_MAX_SIZE but this also shows that the code is rather fragile. A recent UBSAN report just underlines that by the following report UBSAN: Undefined behaviour in mm/page_alloc.c:3117:19 shift exponent 51 is too large for 32-bit type 'int' CPU: 0 PID: 6520 Comm: syz-executor1 Not tainted 4.19.0-rc2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xd2/0x148 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x94 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x2b6/0x30b lib/ubsan.c:425 __zone_watermark_ok+0x2c7/0x400 mm/page_alloc.c:3117 zone_watermark_fast mm/page_alloc.c:3216 [inline] get_page_from_freelist+0xc49/0x44c0 mm/page_alloc.c:3300 __alloc_pages_nodemask+0x21e/0x640 mm/page_alloc.c:4370 alloc_pages_current+0xcc/0x210 mm/mempolicy.c:2093 alloc_pages include/linux/gfp.h:509 [inline] __get_free_pages+0x12/0x60 mm/page_alloc.c:4414 dma_mem_alloc+0x36/0x50 arch/x86/include/asm/floppy.h:156 raw_cmd_copyin drivers/block/floppy.c:3159 [inline] raw_cmd_ioctl drivers/block/floppy.c:3206 [inline] fd_locked_ioctl+0xa00/0x2c10 drivers/block/floppy.c:3544 fd_ioctl+0x40/0x60 drivers/block/floppy.c:3571 __blkdev_driver_ioctl block/ioctl.c:303 [inline] blkdev_ioctl+0xb3c/0x1a30 block/ioctl.c:601 block_ioctl+0x105/0x150 fs/block_dev.c:1883 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x1c0/0x1150 fs/ioctl.c:687 ksys_ioctl+0x9e/0xb0 fs/ioctl.c:702 __do_sys_ioctl fs/ioctl.c:709 [inline] __se_sys_ioctl fs/ioctl.c:707 [inline] __x64_sys_ioctl+0x7e/0xc0 fs/ioctl.c:707 do_syscall_64+0xc4/0x510 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Note that this is not a kvmalloc path. It is just that the fast path really depends on having sanitzed order as well. Therefore move the order check to the fast path. Link: http://lkml.kernel.org/r/20181113094305.GM15120@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reported-by: Kyungtae Kim <kt0755@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Byoungyoung Lee <lifeasageek@gmail.com> Cc: "Dae R. Jeong" <threeearcat@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:10 UTC
6f4d29d Uwe Kleine-König 16 November 2018, 23:08:43 UTC scripts/spdxcheck.py: make python3 compliant Without this change the following happens when using Python3 (3.6.6): $ echo "GPL-2.0" | python3 scripts/spdxcheck.py - FAIL: 'str' object has no attribute 'decode' Traceback (most recent call last): File "scripts/spdxcheck.py", line 253, in <module> parser.parse_lines(sys.stdin, args.maxlines, '-') File "scripts/spdxcheck.py", line 171, in parse_lines line = line.decode(locale.getpreferredencoding(False), errors='ignore') AttributeError: 'str' object has no attribute 'decode' So as the line is already a string, there is no need to decode it and the line can be dropped. /usr/bin/python on Arch is Python 3. So this would indeed be worth going into 4.19. Link: http://lkml.kernel.org/r/20181023070802.22558-1-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Joe Perches <joe@perches.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:10 UTC
1a41364 Yufen Yu 16 November 2018, 23:08:39 UTC tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset Other filesystems such as ext4, f2fs and ubifs all return ENXIO when lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset. man 2 lseek says : EINVAL whence is not valid. Or: the resulting file offset would be : negative, or beyond the end of a seekable device. : : ENXIO whence is SEEK_DATA or SEEK_HOLE, and the file offset is beyond : the end of the file. Make tmpfs return ENXIO under these circumstances as well. After this, tmpfs also passes xfstests's generic/448. [akpm@linux-foundation.org: rewrite changelog] Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.com Signed-off-by: Yufen Yu <yuyufen@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:10 UTC
1c23b41 Arnd Bergmann 16 November 2018, 23:08:35 UTC lib/ubsan.c: don't mark __ubsan_handle_builtin_unreachable as noreturn gcc-8 complains about the prototype for this function: lib/ubsan.c:432:1: error: ignoring attribute 'noreturn' in declaration of a built-in function '__ubsan_handle_builtin_unreachable' because it conflicts with attribute 'const' [-Werror=attributes] This is actually a GCC's bug. In GCC internals __ubsan_handle_builtin_unreachable() declared with both 'noreturn' and 'const' attributes instead of only 'noreturn': https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84210 Workaround this by removing the noreturn attribute. [aryabinin: add information about GCC bug in changelog] Link: http://lkml.kernel.org/r/20181107144516.4587-1-aryabinin@virtuozzo.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Olof Johansson <olof@lixom.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:10 UTC
13c9aaf Janne Huttunen 16 November 2018, 23:08:32 UTC mm/vmstat.c: fix NUMA statistics updates Scan through the whole array to see if an update is needed. While we're at it, use sizeof() to be safe against any possible type changes in the future. The bug here is that we wouldn't sync per-cpu counters into global ones if there was an update of numa_stats for higher cpus. Highly theoretical one though because it is much more probable that zone_stats are updated so we would refresh anyway. So I wouldn't bother to mark this for stable, yet something nice to fix. [mhocko@suse.com: changelog enhancement] Link: http://lkml.kernel.org/r/1541601517-17282-1-git-send-email-janne.huttunen@nokia.com Fixes: 1d90ca897cb0 ("mm: update NUMA counter threshold size") Signed-off-by: Janne Huttunen <janne.huttunen@nokia.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:10 UTC
7817955 Mike Rapoport 16 November 2018, 23:08:29 UTC mm/gup.c: fix follow_page_mask() kerneldoc comment Commit df06b37ffe5a ("mm/gup: cache dev_pagemap while pinning pages") modified the signature of follow_page_mask() but left the parameter description behind. Update the description to make the code and comments agree again. While at it, update formatting of the return value description to match Documentation/doc-guide/kernel-doc.rst guidelines. Link: http://lkml.kernel.org/r/1541603316-27832-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:10 UTC
5040f8d Wengang Wang 16 November 2018, 23:08:25 UTC ocfs2: free up write context when direct IO failed The write context should also be freed even when direct IO failed. Otherwise a memory leak is introduced and entries remain in oi->ip_unwritten_list causing the following BUG later in unlink path: ERROR: bug expression: !list_empty(&oi->ip_unwritten_list) ERROR: Clear inode of 215043, inode has unwritten extents ... Call Trace: ? __set_current_blocked+0x42/0x68 ocfs2_evict_inode+0x91/0x6a0 [ocfs2] ? bit_waitqueue+0x40/0x33 evict+0xdb/0x1af iput+0x1a2/0x1f7 do_unlinkat+0x194/0x28f SyS_unlinkat+0x1b/0x2f do_syscall_64+0x79/0x1ae entry_SYSCALL_64_after_hwframe+0x151/0x0 This patch also logs, with frequency limit, direct IO failures. Link: http://lkml.kernel.org/r/20181102170632.25921-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Changwei Ge <ge.changwei@h3c.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:09 UTC
f5f67cc Randy Dunlap 16 November 2018, 23:08:22 UTC scripts/faddr2line: fix location of start_kernel in comment Fix a source file reference location to the correct path name. Link: http://lkml.kernel.org/r/1d50bd3d-178e-dcd8-779f-9711887440eb@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:09 UTC
a76cf1a Roman Gushchin 16 November 2018, 23:08:18 UTC mm: don't reclaim inodes with many attached pages Spock reported that commit 172b06c32b94 ("mm: slowly shrink slabs with a relatively small number of objects") leads to a regression on his setup: periodically the majority of the pagecache is evicted without an obvious reason, while before the change the amount of free memory was balancing around the watermark. The reason behind is that the mentioned above change created some minimal background pressure on the inode cache. The problem is that if an inode is considered to be reclaimed, all belonging pagecache page are stripped, no matter how many of them are there. So, if a huge multi-gigabyte file is cached in the memory, and the goal is to reclaim only few slab objects (unused inodes), we still can eventually evict all gigabytes of the pagecache at once. The workload described by Spock has few large non-mapped files in the pagecache, so it's especially noticeable. To solve the problem let's postpone the reclaim of inodes, which have more than 1 attached page. Let's wait until the pagecache pages will be evicted naturally by scanning the corresponding LRU lists, and only then reclaim the inode structure. Link: http://lkml.kernel.org/r/20181023164302.20436-1-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Reported-by: Spock <dairinin@gmail.com> Tested-by: Spock <dairinin@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Rik van Riel <riel@surriel.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> [4.19.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:09 UTC
9d78999 Michal Hocko 16 November 2018, 23:08:15 UTC mm, memory_hotplug: check zone_movable in has_unmovable_pages Page state checks are racy. Under a heavy memory workload (e.g. stress -m 200 -t 2h) it is quite easy to hit a race window when the page is allocated but its state is not fully populated yet. A debugging patch to dump the struct page state shows has_unmovable_pages: pfn:0x10dfec00, found:0x1, count:0x0 page:ffffea0437fb0000 count:1 mapcount:1 mapping:ffff880e05239841 index:0x7f26e5000 compound_mapcount: 1 flags: 0x5fffffc0090034(uptodate|lru|active|head|swapbacked) Note that the state has been checked for both PageLRU and PageSwapBacked already. Closing this race completely would require some sort of retry logic. This can be tricky and error prone (think of potential endless or long taking loops). Workaround this problem for movable zones at least. Such a zone should only contain movable pages. Commit 15c30bc09085 ("mm, memory_hotplug: make has_unmovable_pages more robust") has told us that this is not strictly true though. Bootmem pages should be marked reserved though so we can move the original check after the PageReserved check. Pages from other zones are still prone to races but we even do not pretend that memory hotremove works for those so pre-mature failure doesn't hurt that much. Link: http://lkml.kernel.org/r/20181106095524.14629-1-mhocko@kernel.org Fixes: 15c30bc09085 ("mm, memory_hotplug: make has_unmovable_pages more robust") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:09 UTC
873d7bc Vasily Averin 16 November 2018, 23:08:11 UTC mm/swapfile.c: use kvzalloc for swap_info_struct allocation Commit a2468cc9bfdf ("swap: choose swap device according to numa node") changed 'avail_lists' field of 'struct swap_info_struct' to an array. In popular linux distros it increased size of swap_info_struct up to 40 Kbytes and now swap_info_struct allocation requires order-4 page. Switch to kvzmalloc allows to avoid unexpected allocation failures. Link: http://lkml.kernel.org/r/fc23172d-3c75-21e2-d551-8b1808cbe593@virtuozzo.com Fixes: a2468cc9bfdf ("swap: choose swap device according to numa node") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Acked-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Huang Ying <ying.huang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:09 UTC
f341e16 Aaro Koskinen 16 November 2018, 23:08:08 UTC MAINTAINERS: update OMAP MMC entry Jarkko's e-mail address hasn't worked for a long time. We still want to keep this driver working as it is critical for some of the OMAP boards. I use and test this driver frequently, so change myself as a maintainer with "Odd Fixes" status. Link: http://lkml.kernel.org/r/20181106222750.12939-1-aaro.koskinen@iki.fi Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:09 UTC
5e41540 Mike Kravetz 16 November 2018, 23:08:04 UTC hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444! This bug has been experienced several times by the Oracle DB team. The BUG is in remove_inode_hugepages() as follows: /* * If page is mapped, it was faulted in after being * unmapped in caller. Unmap (again) now after taking * the fault mutex. The mutex will prevent faults * until we finish removing the page. * * This race can only happen in the hole punch case. * Getting here in a truncate operation is a bug. */ if (unlikely(page_mapped(page))) { BUG_ON(truncate_op); In this case, the elevated map count is not the result of a race. Rather it was incorrectly incremented as the result of a bug in the huge pmd sharing code. Consider the following: - Process A maps a hugetlbfs file of sufficient size and alignment (PUD_SIZE) that a pmd page could be shared. - Process B maps the same hugetlbfs file with the same size and alignment such that a pmd page is shared. - Process B then calls mprotect() to change protections for the mapping with the shared pmd. As a result, the pmd is 'unshared'. - Process B then calls mprotect() again to chage protections for the mapping back to their original value. pmd remains unshared. - Process B then forks and process C is created. During the fork process, we do dup_mm -> dup_mmap -> copy_page_range to copy page tables. Copying page tables for hugetlb mappings is done in the routine copy_hugetlb_page_range. In copy_hugetlb_page_range(), the destination pte is obtained by: dst_pte = huge_pte_alloc(dst, addr, sz); If pmd sharing is possible, the returned pointer will be to a pte in an existing page table. In the situation above, process C could share with either process A or process B. Since process A is first in the list, the returned pte is a pointer to a pte in process A's page table. However, the check for pmd sharing in copy_hugetlb_page_range is: /* If the pagetables are shared don't copy or take references */ if (dst_pte == src_pte) continue; Since process C is sharing with process A instead of process B, the above test fails. The code in copy_hugetlb_page_range which follows assumes dst_pte points to a huge_pte_none pte. It copies the pte entry from src_pte to dst_pte and increments this map count of the associated page. This is how we end up with an elevated map count. To solve, check the dst_pte entry for huge_pte_none. If !none, this implies PMD sharing so do not copy. Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com Fixes: c5c99429fa57 ("fix hugepages leak due to pagetable page sharing") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:09 UTC
8fcb231 Olof Johansson 16 November 2018, 23:08:00 UTC kernel/sched/psi.c: simplify cgroup_move_task() The existing code triggered an invalid warning about 'rq' possibly being used uninitialized. Instead of doing the silly warning suppression by initializa it to NULL, refactor the code to bail out early instead. Warning was: kernel/sched/psi.c: In function `cgroup_move_task': kernel/sched/psi.c:639:13: warning: `rq' may be used uninitialized in this function [-Wmaybe-uninitialized] Link: http://lkml.kernel.org/r/20181103183339.8669-1-olof@lixom.net Fixes: 2ce7135adc9ad ("psi: cgroup support") Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:09 UTC
ca0246b Vitaly Wool 16 November 2018, 23:07:56 UTC z3fold: fix possible reclaim races Reclaim and free can race on an object which is basically fine but in order for reclaim to be able to map "freed" object we need to encode object length in the handle. handle_to_chunks() is then introduced to extract object length from a handle and use it during mapping. Moreover, to avoid racing on a z3fold "headless" page release, we should not try to free that page in z3fold_free() if the reclaim bit is set. Also, in the unlikely case of trying to reclaim a page being freed, we should not proceed with that page. While at it, fix the page accounting in reclaim function. This patch supersedes "[PATCH] z3fold: fix reclaim lock-ups". Link: http://lkml.kernel.org/r/20181105162225.74e8837d03583a9b707cf559@gmail.com Signed-off-by: Vitaly Wool <vitaly.vul@sony.com> Signed-off-by: Jongseok Kim <ks77sj@gmail.com> Reported-by-by: Jongseok Kim <ks77sj@gmail.com> Reviewed-by: Snild Dolkow <snild@sony.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 November 2018, 18:15:09 UTC
1c1274a Jon Maloy 17 November 2018, 17:17:06 UTC tipc: don't assume linear buffer when reading ancillary data The code for reading ancillary data from a received buffer is assuming the buffer is linear. To make this assumption true we have to linearize the buffer before message data is read. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 November 2018, 06:08:02 UTC
adba75b Jon Maloy 16 November 2018, 21:55:04 UTC tipc: fix lockdep warning when reinitilaizing sockets We get the following warning: [ 47.926140] 32-bit node address hash set to 2010a0a [ 47.927202] [ 47.927433] ================================ [ 47.928050] WARNING: inconsistent lock state [ 47.928661] 4.19.0+ #37 Tainted: G E [ 47.929346] -------------------------------- [ 47.929954] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 47.930116] swapper/3/0 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 47.930116] 00000000af8bc31e (&(&ht->lock)->rlock){+.?.}, at: rhashtable_walk_enter+0x36/0xb0 [ 47.930116] {SOFTIRQ-ON-W} state was registered at: [ 47.930116] _raw_spin_lock+0x29/0x60 [ 47.930116] rht_deferred_worker+0x556/0x810 [ 47.930116] process_one_work+0x1f5/0x540 [ 47.930116] worker_thread+0x64/0x3e0 [ 47.930116] kthread+0x112/0x150 [ 47.930116] ret_from_fork+0x3a/0x50 [ 47.930116] irq event stamp: 14044 [ 47.930116] hardirqs last enabled at (14044): [<ffffffff9a07fbba>] __local_bh_enable_ip+0x7a/0xf0 [ 47.938117] hardirqs last disabled at (14043): [<ffffffff9a07fb81>] __local_bh_enable_ip+0x41/0xf0 [ 47.938117] softirqs last enabled at (14028): [<ffffffff9a0803ee>] irq_enter+0x5e/0x60 [ 47.938117] softirqs last disabled at (14029): [<ffffffff9a0804a5>] irq_exit+0xb5/0xc0 [ 47.938117] [ 47.938117] other info that might help us debug this: [ 47.938117] Possible unsafe locking scenario: [ 47.938117] [ 47.938117] CPU0 [ 47.938117] ---- [ 47.938117] lock(&(&ht->lock)->rlock); [ 47.938117] <Interrupt> [ 47.938117] lock(&(&ht->lock)->rlock); [ 47.938117] [ 47.938117] *** DEADLOCK *** [ 47.938117] [ 47.938117] 2 locks held by swapper/3/0: [ 47.938117] #0: 0000000062c64f90 ((&d->timer)){+.-.}, at: call_timer_fn+0x5/0x280 [ 47.938117] #1: 00000000ee39619c (&(&d->lock)->rlock){+.-.}, at: tipc_disc_timeout+0xc8/0x540 [tipc] [ 47.938117] [ 47.938117] stack backtrace: [ 47.938117] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G E 4.19.0+ #37 [ 47.938117] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 47.938117] Call Trace: [ 47.938117] <IRQ> [ 47.938117] dump_stack+0x5e/0x8b [ 47.938117] print_usage_bug+0x1ed/0x1ff [ 47.938117] mark_lock+0x5b5/0x630 [ 47.938117] __lock_acquire+0x4c0/0x18f0 [ 47.938117] ? lock_acquire+0xa6/0x180 [ 47.938117] lock_acquire+0xa6/0x180 [ 47.938117] ? rhashtable_walk_enter+0x36/0xb0 [ 47.938117] _raw_spin_lock+0x29/0x60 [ 47.938117] ? rhashtable_walk_enter+0x36/0xb0 [ 47.938117] rhashtable_walk_enter+0x36/0xb0 [ 47.938117] tipc_sk_reinit+0xb0/0x410 [tipc] [ 47.938117] ? mark_held_locks+0x6f/0x90 [ 47.938117] ? __local_bh_enable_ip+0x7a/0xf0 [ 47.938117] ? lockdep_hardirqs_on+0x20/0x1a0 [ 47.938117] tipc_net_finalize+0xbf/0x180 [tipc] [ 47.938117] tipc_disc_timeout+0x509/0x540 [tipc] [ 47.938117] ? call_timer_fn+0x5/0x280 [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] call_timer_fn+0xa1/0x280 [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] run_timer_softirq+0x1f2/0x4d0 [ 47.938117] __do_softirq+0xfc/0x413 [ 47.938117] irq_exit+0xb5/0xc0 [ 47.938117] smp_apic_timer_interrupt+0xac/0x210 [ 47.938117] apic_timer_interrupt+0xf/0x20 [ 47.938117] </IRQ> [ 47.938117] RIP: 0010:default_idle+0x1c/0x140 [ 47.938117] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 54 55 53 65 8b 2d d8 2b 74 65 0f 1f 44 00 00 e8 c6 2c 8b ff fb f4 <65> 8b 2d c5 2b 74 65 0f 1f 44 00 00 5b 5d 41 5c c3 65 8b 05 b4 2b [ 47.938117] RSP: 0018:ffffaf6ac0207ec8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 [ 47.938117] RAX: ffff8f5b3735e200 RBX: 0000000000000003 RCX: 0000000000000001 [ 47.938117] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8f5b3735e200 [ 47.938117] RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000 [ 47.938117] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 47.938117] R13: 0000000000000000 R14: ffff8f5b3735e200 R15: ffff8f5b3735e200 [ 47.938117] ? default_idle+0x1a/0x140 [ 47.938117] do_idle+0x1bc/0x280 [ 47.938117] cpu_startup_entry+0x19/0x20 [ 47.938117] start_secondary+0x187/0x1c0 [ 47.938117] secondary_startup_64+0xa4/0xb0 The reason seems to be that tipc_net_finalize()->tipc_sk_reinit() is calling the function rhashtable_walk_enter() within a timer interrupt. We fix this by executing tipc_net_finalize() in work queue context. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 November 2018, 06:01:31 UTC
33d9a2c Eric Dumazet 18 November 2018, 05:57:02 UTC net-gro: reset skb->pkt_type in napi_reuse_skb() eth_type_trans() assumes initial value for skb->pkt_type is PACKET_HOST. This is indeed the value right after a fresh skb allocation. However, it is possible that GRO merged a packet with a different value (like PACKET_OTHERHOST in case macvlan is used), so we need to make sure napi->skb will have pkt_type set back to PACKET_HOST. Otherwise, valid packets might be dropped by the stack because their pkt_type is not PACKET_HOST. napi_reuse_skb() was added in commit 96e93eab2033 ("gro: Add internal interfaces for VLAN"), but this bug always has been there. Fixes: 96e93eab2033 ("gro: Add internal interfaces for VLAN") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 November 2018, 05:59:18 UTC
5396527 David S. Miller 18 November 2018, 05:54:53 UTC Merge branch 'tdc-fixes' Lucas Bates says: ==================== Prevent uncaught exceptions in tdc This patch series addresses two potential bugs in tdc that can cause exceptions to be raised in certain circumstances. These exceptions are generally not handled, so instead we will prevent them from being raised. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 18 November 2018, 05:54:53 UTC
c6cecf4 Brenda J. Butler 16 November 2018, 22:37:56 UTC tc-testing: tdc.py: Guard against lack of returncode in executed command Add some defensive coding in case one of the subprocesses created by tdc returns nothing. If no object is returned from exec_cmd, then tdc will halt with an unhandled exception. Signed-off-by: Brenda J. Butler <bjb@mojatatu.com> Signed-off-by: Lucas Bates <lucasb@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 November 2018, 05:54:53 UTC
5aaf642 Lucas Bates 16 November 2018, 22:37:55 UTC tc-testing: tdc.py: ignore errors when decoding stdout/stderr Prevent exceptions from being raised while decoding output from an executed command. There is no impact on tdc's execution and the verify command phase would fail the pattern match. Signed-off-by: Lucas Bates <lucasb@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 November 2018, 05:54:53 UTC
16f7eb2 Sabrina Dubroca 16 November 2018, 15:58:19 UTC ip_tunnel: don't force DF when MTU is locked The various types of tunnels running over IPv4 can ask to set the DF bit to do PMTU discovery. However, PMTU discovery is subject to the threshold set by the net.ipv4.route.min_pmtu sysctl, and is also disabled on routes with "mtu lock". In those cases, we shouldn't set the DF bit. This patch makes setting the DF bit conditional on the route's MTU locking state. This issue seems to be older than git history. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 November 2018, 05:50:55 UTC
8840c3e Toke Høiland-Jørgensen 16 November 2018, 20:13:59 UTC MAINTAINERS: Add entry for CAKE qdisc We would like the existing community to be kept in the loop for any new developments on CAKE; and I certainly plan to keep maintaining it. Reflect this in MAINTAINERS. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net> 18 November 2018, 05:39:53 UTC
9d332e6 Nikolay Aleksandrov 16 November 2018, 16:50:01 UTC net: bridge: fix vlan stats use-after-free on destruction Syzbot reported a use-after-free of the global vlan context on port vlan destruction. When I added per-port vlan stats I missed the fact that the global vlan context can be freed before the per-port vlan rcu callback. There're a few different ways to deal with this, I've chosen to add a new private flag that is set only when per-port stats are allocated so we can directly check it on destruction without dereferencing the global context at all. The new field in net_bridge_vlan uses a hole. v2: cosmetic change, move the check to br_process_vlan_info where the other checks are done v3: add change log in the patch, add private (in-kernel only) flags in a hole in net_bridge_vlan struct and use that instead of mixing user-space flags with private flags Fixes: 9163a0fc1f0c ("net: bridge: add support for per-port vlan stats") Reported-by: syzbot+04681da557a0e49a52e5@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 November 2018, 05:38:44 UTC
9550658 Slavomir Kaslev 16 November 2018, 09:27:53 UTC socket: do a generic_file_splice_read when proto_ops has no splice_read splice(2) fails with -EINVAL when called reading on a socket with no splice_read set in its proto_ops (such as vsock sockets). Switch this to fallbacks to a generic_file_splice_read instead. Signed-off-by: Slavomir Kaslev <kaslevs@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 November 2018, 05:34:11 UTC
df5a8ec Martin Schiller 16 November 2018, 07:38:36 UTC net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs Up until commit 7e5fbd1e0700 ("net: mdio-gpio: Convert to use gpiod functions where possible"), the _cansleep variants of the gpio_ API was used. After that commit and the change to gpiod_ API, the _cansleep() was dropped. This then results in WARN_ON() when used with GPIO devices which do sleep. Add back the _cansleep() to avoid this. Fixes: 7e5fbd1e0700 ("net: mdio-gpio: Convert to use gpiod functions where possible") Signed-off-by: Martin Schiller <ms@dev.tdt.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 November 2018, 05:11:51 UTC
160396a David S. Miller 17 November 2018, 07:04:37 UTC Revert "net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs" This reverts commit dfa0d55ff6be64e7b6881212a291cb95f8da3b08. Discussion still ongoing, I shouldn't have applied this. Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2018, 07:04:37 UTC
5594923 David S. Miller 17 November 2018, 04:26:30 UTC Merge tag 'batadv-net-for-davem-20181114' of git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== Here are two batman-adv bugfixes: - Explicitly pad short ELP packets with zeros, by Sven Eckelmann - Fix packet size calculation when merging fragments, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2018, 04:26:30 UTC
dfa0d55 Martin Schiller 14 November 2018, 11:54:49 UTC net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs This commit re-enables support for slow GPIO pins. It was initially introduced by commit 2d6c9091ab76 ("net: mdio-gpio: support access that may sleep") and got lost by commit 7e5fbd1e0700 ("net: mdio-gpio: Convert to use gpiod functions where possible"). Also add a warning about slow GPIO pins like it is done in i2c-gpio. Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2018, 04:25:22 UTC
19ab691 Davide Caratti 14 November 2018, 11:17:25 UTC net/sched: act_pedit: fix memory leak when IDR allocation fails tcf_idr_check_alloc() can return a negative value, on allocation failures (-ENOMEM) or IDR exhaustion (-ENOSPC): don't leak keys_ex in these cases. Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2018, 03:53:45 UTC
06bc4d0 Christophe JAILLET 13 November 2018, 17:42:24 UTC net: lantiq: Fix returned value in case of error in 'xrx200_probe()' Return 'err' in the error handling path instead of 0. Return explicitly 0 in the normal path, instead of 'err', which is known to be 0 at this point. Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2018, 03:46:49 UTC
761f602 Xin Long 13 November 2018, 16:48:28 UTC ipv6: fix a dst leak when removing its exception These is no need to hold dst before calling rt6_remove_exception_rt(). The call to dst_hold_safe() in ip6_link_failure() was for ip6_del_rt(), which has been removed in Commit 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes"). Otherwise, it will cause a dst leak. This patch is to simply remove the dst_hold_safe() call before calling rt6_remove_exception_rt() and also do the same in ip6_del_cached_rt(). It's safe, because the removal of the exception that holds its dst's refcnt is protected by rt6_exception_lock. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Fixes: 23fb93a4d3f1 ("net/ipv6: Cleanup exception and cache route handling") Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2018, 03:44:15 UTC
83e65df Maxime Chevallier 09 November 2018, 08:17:33 UTC net: mvneta: Don't advertise 2.5G modes Using 2.5G speed relies on the SerDes lanes being configured accordingly. The lanes have to be reconfigured to switch between 1G and 2.5G, and for now only the bootloader does this configuration. In the case we add a Comphy driver to handle switching the lanes dynamically, it's better for now to stick with supporting only 1G and add advertisement for 2.5G once we really are capable of handling both speeds without problem. Since the interface mode is initialy taken from the DT, we want to make sure that adding comphy support won't break boards that don't update their dtb. Fixes: da58a931f248 ("net: mvneta: Add support for 2500Mbps SGMII") Reported-by: Andrew Lunn <andrew@lunn.ch> Reported-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2018, 03:23:45 UTC
1ce80e0 Linus Torvalds 16 November 2018, 19:18:36 UTC Merge tag 'fsnotify_for_v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify fix from Jan Kara: "One small fsnotify fix for duplicate events" * tag 'fsnotify_for_v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fanotify: fix handling of events on child sub-directory 16 November 2018, 19:18:36 UTC
e6a2562 Linus Torvalds 16 November 2018, 17:38:14 UTC Merge tag 'gfs2-4.20.fixes3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull bfs2 fixes from Andreas Gruenbacher: "Fix two bugs leading to leaked buffer head references: - gfs2: Put bitmap buffers in put_super - gfs2: Fix iomap buffer head reference counting bug And one bug leading to significant slow-downs when deleting large files: - gfs2: Fix metadata read-ahead during truncate (2)" * tag 'gfs2-4.20.fixes3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fix iomap buffer head reference counting bug gfs2: Fix metadata read-ahead during truncate (2) gfs2: Put bitmap buffers in put_super 16 November 2018, 17:38:14 UTC
c26b5aa Andreas Gruenbacher 11 November 2018, 11:15:21 UTC gfs2: Fix iomap buffer head reference counting bug GFS2 passes the inode buffer head (dibh) from gfs2_iomap_begin to gfs2_iomap_end in iomap->private. It sets that private pointer in gfs2_iomap_get. Users of gfs2_iomap_get other than gfs2_iomap_begin would have to release iomap->private, but this isn't done correctly, leading to a leak of buffer head references. To fix this, move the code for setting iomap->private from gfs2_iomap_get to gfs2_iomap_begin. Fixes: 64bc06bb32 ("gfs2: iomap buffered write support") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 November 2018, 17:35:09 UTC
32e2524 Linus Torvalds 16 November 2018, 16:37:27 UTC Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Potential memory overwrite in simd - Kernel info leaks in crypto_user - NULL dereference and use-after-free in hisilicon" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: user - Zeroize whole structure given to user space crypto: user - fix leaking uninitialized memory to userspace crypto: simd - correctly take reqsize of wrapped skcipher into account crypto: hisilicon - Fix reference after free of memories on error path crypto: hisilicon - Fix NULL dereference for same dst and src 16 November 2018, 16:37:27 UTC
4efd346 Linus Torvalds 16 November 2018, 16:17:29 UTC Merge tag 'drm-fixes-2018-11-16' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Live from Vancouver, SoC maintainer talk, this weeks drm fixes pull for rc3: omapdrm: - regression fixes for the reordering bridge stuff that went into rc1 i915: - incorrect EU count fix - HPD storm fix - MST fix - relocation fix for gen4/5 amdgpu: - huge page handling fix - IH ring setup - XGMI aperture setup - watermark setup fix misc: - docs and MST fix" * tag 'drm-fixes-2018-11-16' of git://anongit.freedesktop.org/drm/drm: (23 commits) drm/i915: Account for scale factor when calculating initial phase drm/i915: Clean up skl_program_scaler() drm/i915: Move programming plane scaler to its own function. drm/i915/icl: Drop spurious register read from icl_dbuf_slices_update drm/i915: fix broadwell EU computation drm/amdgpu: fix huge page handling on Vega10 drm/amd/pp: Fix truncated clock value when set watermark drm/amdgpu: fix bug with IH ring setup drm/meson: venc: dmt mode must use encp drm/amdgpu: set system aperture to cover whole FB region drm/i915: Fix hpd handling for pins with two encoders drm/i915/execlists: Force write serialisation into context image vs execution drm/i915/icl: Fix power well 2 wrt. DC-off toggling order drm/i915: Fix NULL deref when re-enabling HPD IRQs on systems with MST drm/i915: Fix possible race in intel_dp_add_mst_connector() drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5 drm/omap: dsi: Fix missing of_platform_depopulate() drm/omap: Move DISPC runtime PM handling to omapdrm drm/omap: dsi: Ensure the device is active during probe drm/omap: hdmi4: Ensure the device is active during bind ... 16 November 2018, 16:17:29 UTC
ef268de Linus Torvalds 16 November 2018, 16:14:54 UTC Merge tag 'powerpc-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Two weeks worth of fixes since rc1. - I broke 16-byte alignment of the stack when we moved PPR into pt_regs. Despite being required by the ABI this broke almost nothing, we eventually hit it in code where GCC does arithmetic on the stack pointer assuming the bottom 4 bits are clear. Fix it by padding the in-kernel pt_regs by 8 bytes. - A couple of commits fixing minor bugs in the recent SLB rewrite. - A build fix related to tracepoints in KVM in some configurations. - Our old "IO workarounds" code written for Cell couldn't coexist in a kernel that runs on Power9 with the Radix MMU, fix that. - Remove the NPU DMA ops, these just printed a warning and should never have been called. - Suppress an overly chatty message triggered by CPU hotplug in some configs. - Two small selftest fixes. Thanks to: Alistair Popple, Gustavo Romero, Nicholas Piggin, Satheesh Rajendran, Scott Wood" * tag 'powerpc-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Adjust wild_bctr to build with old binutils powerpc/64: Fix kernel stack 16-byte alignment powerpc/numa: Suppress "VPHN is not supported" messages selftests/powerpc: Fix wild_bctr test to work on ppc64 powerpc/io: Fix the IO workarounds code to work with Radix powerpc/mm/64s: Fix preempt warning in slb_allocate_kernel() KVM: PPC: Move and undef TRACE_INCLUDE_PATH/FILE powerpc/mm/64s: Only use slbfee on CPUs that support it powerpc/mm/64s: Use PPC_SLBFEE macro powerpc/mm/64s: Consolidate SLB assertions powerpc/powernv/npu: Remove NPU DMA ops 16 November 2018, 16:14:54 UTC
50d25bd Linus Torvalds 16 November 2018, 16:10:27 UTC Merge tag 'xtensa-20181115' of git://github.com/jcmvbkbc/linux-xtensa Pull Xtensa fixes from Max Filippov: - fix stack alignment for bFLT binaries. - fix physical-to-virtual address translation for boot parameters in MMUv3 256+256 and 512+512 virtual memory layouts. * tag 'xtensa-20181115' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix boot parameters address translation xtensa: make sure bFLT stack is 16 byte aligned 16 November 2018, 16:10:27 UTC
59749c2 Linus Torvalds 16 November 2018, 15:31:59 UTC Merge tag 'for-linus-20181115' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - Discard loop fix, caused by integer overflow (Dave) - Blacklist of Samsung drive that hangs with power management (Diego) - Copy bio priority when cloning it (Hannes) - Fix race condition exposed in floppy (me) - Fix SCSI queue cleanup regression. While elusive, it caused oopses in queue running (Ming) - Fix bad string copy in kyber tracing (Omar) * tag 'for-linus-20181115' of git://git.kernel.dk/linux-block: SCSI: fix queue cleanup race before queue initialization is done block: fix 32 bit overflow in __blkdev_issue_discard() libata: blacklist SAMSUNG MZ7TD256HAFV-000L9 SSD block: copy ioprio in __bio_clone_fast() and bounce kyber: fix wrong strlcpy() size in trace_kyber_latency() floppy: fix race condition in __floppy_read_block_0() 16 November 2018, 15:31:59 UTC
9b5f361 Linus Torvalds 16 November 2018, 15:30:13 UTC Merge tag 'fuse-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: "A couple of fixes, all bound for -stable (i.e. not regressions in this cycle)" * tag 'fuse-fixes-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix use-after-free in fuse_direct_IO() fuse: fix possibly missed wake-up after abort fuse: fix leaked notify reply 16 November 2018, 15:30:13 UTC
a97b956 Andrew Morton 16 November 2018, 00:15:20 UTC drivers/net/ethernet/qlogic/qed/qed_rdma.h: fix typo Add missing semicolon. Fixes: 291d57f67d244973 ("qed: Fix rdma_info structure allocation") Cc: Michal Kalderon <michal.kalderon@cavium.com> Cc: Denis Bolotin <denis.bolotin@cavium.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2018, 00:21:00 UTC
35bf9f1 David S. Miller 16 November 2018, 00:09:31 UTC Merge branch 'mlx4-fixes' Tariq Toukan says: ==================== mlx4 fixes for 4.20-rc This patchset includes small fixes for mlx4_core driver. First patch by Jack zeros a field in a FW communication command, to match the FW spec. Please queue it to -stable >= v3.17. In the second patch I zero-initialize a variable to silence a compliation warning. Please queue it to -stable >= v3.19. Third patch by Aya replaces int fields with unsigned int, to fix a UBSAN warning. Please queue it to -stable >= v3.13. Series generated against net commit: db8ddde766ad Merge branch 'qed-Miscellaneous-bug-fixes' ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2018, 00:09:31 UTC
a463146 Aya Levin 15 November 2018, 16:05:15 UTC net/mlx4: Fix UBSAN warning of signed integer overflow UBSAN: Undefined behavior in drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29 signed integer overflow: 1802201963 + 1802201963 cannot be represented in type 'int' The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors granting of reserved resources. The grant operation is calculated and protected, thus both members of the union cannot be negative. Changed type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed int to unsigned int, allowing large value. Fixes: 5a0d0a6161ae ("mlx4: Structures and init/teardown for VF resource quotas") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2018, 00:09:31 UTC
3ea7e7e Tariq Toukan 15 November 2018, 16:05:14 UTC net/mlx4_core: Fix uninitialized variable compilation warning Initialize the uid variable to zero to avoid the compilation warning. Fixes: 7a89399ffad7 ("net/mlx4: Add mlx4_bitmap zone allocator") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2018, 00:09:31 UTC
bd85fbc Jack Morgenstein 15 November 2018, 16:05:13 UTC net/mlx4_core: Zero out lkey field in SW2HW_MPT fw command When re-registering a user mr, the mpt information for the existing mr when running SRIOV is obtained via the QUERY_MPT fw command. The returned information includes the mpt's lkey. This retrieved mpt information is used to move the mpt back to hardware ownership in the rereg flow (via the SW2HW_MPT fw command when running SRIOV). The fw API spec states that for SW2HW_MPT, the lkey field must be zero. Any ConnectX-3 PF driver which checks for strict spec adherence will return failure for SW2HW_MPT if the lkey field is not zero (although the fw in practice ignores this field for SW2HW_MPT). Thus, in order to conform to the fw API spec, set the lkey field to zero before invoking SW2HW_MPT when running SRIOV. Fixes: e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2018, 00:09:30 UTC
20325e8 Dave Airlie 15 November 2018, 22:52:14 UTC Merge tag 'drm-intel-fixes-2018-11-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix Bugzilla #108712: Fix incorrect EU count report from kernel - Fix to account for scale factor when calculating initial phase on scaled output - Avoid too trigger-happy HPD storm detection and fix a race and an OOPS for MST systems. - Relocation race fix for Gen4/5 - A couple ICL fixes and dependencies for above Fixes:. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181115164709.GA13430@jlahtine-desk.ger.corp.intel.com 15 November 2018, 22:52:14 UTC
08e14fe Eric Dumazet 13 November 2018, 00:17:16 UTC net_sched: sch_fq: ensure maxrate fq parameter applies to EDT flows When EDT conversion happened, fq lost the ability to enfore a maxrate for all flows. It kept it for non EDT flows. This commit restores the functionality. Tested: tc qd replace dev eth0 root fq maxrate 500Mbit netperf -P0 -H host -- -O THROUGHPUT 489.75 Fixes: ab408b6dc744 ("tcp: switch tcp and sch_fq to new earliest departure time model") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2018, 19:42:12 UTC
7150cea David Howells 12 November 2018, 22:33:22 UTC rxrpc: Fix life check The life-checking function, which is used by kAFS to make sure that a call is still live in the event of a pending signal, only samples the received packet serial number counter; it doesn't actually provoke a change in the counter, rather relying on the server to happen to give us a packet in the time window. Fix this by adding a function to force a ping to be transmitted. kAFS then keeps track of whether there's been a stall, and if so, uses the new function to ping the server, resetting the timeout to allow the reply to come back. If there's a stall, a ping and the call is *still* stalled in the same place after another period, then the call will be aborted. Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Fixes: f4d15fb6f99a ("rxrpc: Provide functions for allowing cleaner handling of signals") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2018, 19:35:40 UTC
ebcd210 Ganesh Goudar 15 November 2018, 10:06:21 UTC cxgb4: fix thermal zone build error with CONFIG_THERMAL=m and cxgb4 as built-in build fails, and 'commit e70a57fa59bb ("cxgb4: fix thermal configuration dependencies")' tries to fix it but when cxgb4i is made built-in build fails again, use IS_REACHABLE instead of IS_ENABLED to fix the issue. Fixes: e70a57fa59bb (cxgb4: fix thermal configuration dependencies) Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2018, 17:49:07 UTC
b8c3c10 Thor Thayer 12 November 2018, 17:50:56 UTC MAINTAINERS: Replace Vince Bridgers as Altera TSE maintainer Vince has moved to a different role. Replace him as Altera TSE maintainer. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: Vince Bridgers <vince.bridgers@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2018, 17:41:27 UTC
e371357 David S. Miller 15 November 2018, 17:37:16 UTC Merge branch 'bnxt_en-Bug-fixes' Michael Chan says: ==================== bnxt_en: Bug fixes. Most of the bug fixes are related to the new 57500 chips, including some initialization and counter fixes, disabling RDMA support, and a workaround for occasional missing interrupts. The last patch from Vasundhara fixes the year/month parameters for firmware coredump. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2018, 17:37:16 UTC
8dc5ae2 Vasundhara Volam 15 November 2018, 08:25:42 UTC bnxt_en: Fix filling time in bnxt_fill_coredump_record() Fix the year and month offset while storing it in bnxt_fill_coredump_record(). Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2018, 17:37:15 UTC
83eb5c5 Michael Chan 15 November 2018, 08:25:41 UTC bnxt_en: Add software "missed_irqs" counter. To keep track of the number of times the workaround code for 57500 A0 has been triggered. This is a per NQ counter. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2018, 17:37:15 UTC
ffd7762 Michael Chan 15 November 2018, 08:25:40 UTC bnxt_en: Workaround occasional TX timeout on 57500 A0. Hardware can sometimes not generate NQ MSIX with a single pending CP ring entry. This seems to always happen at the last entry of the CP ring before it wraps. Add logic to check all the CP rings for pending entries without the CP ring consumer index advancing. Calling HWRM_DBG_RING_INFO_GET to read the context of the CP ring will flush out the NQ entry and MSIX. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2018, 17:37:15 UTC
addd4df Michael Chan 15 November 2018, 08:25:39 UTC bnxt_en: Disable RDMA support on the 57500 chips. There is no RDMA support on 57500 chips yet, so prevent bnxt_re from registering on these chips. There is intermittent failure if bnxt_re is allowed to register and proceed with RDMA operations. Fixes: 1ab968d2f1d6 ("bnxt_en: Add PCI ID for BCM57508 device.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2018, 17:37:15 UTC
d198192 Michael Chan 15 November 2018, 08:25:38 UTC bnxt_en: Fix rx_l4_csum_errors counter on 57500 devices. The software counter structure is defined in both the CP ring's structure and the NQ ring's structure on the new devices. The legacy code adds the counter to the CP ring's structure and the counter won't get displayed since the ethtool code is looking at the NQ ring's structure. Since all other counters are contained in the NQ ring's structure, it makes more sense to count rx_l4_csum_errors in the NQ. Fixes: 50e3ab7836b5 ("bnxt_en: Allocate completion ring structures for 57500 series chips.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2018, 17:37:15 UTC
6ba9903 Michael Chan 15 November 2018, 08:25:37 UTC bnxt_en: Fix RSS context allocation. Recent commit has added the reservation of RSS context. This requires bnxt_hwrm_vnic_qcaps() to be called before allocating any RSS contexts. The bnxt_hwrm_vnic_qcaps() call sets up proper flags that will determine how many RSS contexts to allocate to support NTUPLE. This causes a regression that too many RSS contexts are being reserved and causing resource shortage when enabling many VFs. Fix it by calling bnxt_hwrm_vnic_qcaps() earlier. Fixes: 41e8d7983752 ("bnxt_en: Modify the ring reservation functions for 57500 series chips.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2018, 17:37:15 UTC
da5322e Linus Torvalds 15 November 2018, 17:26:09 UTC Merge tag 'selinux-pr-20181115' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull SELinux fixes from Paul Moore: "Two small SELinux fixes for v4.20. Ondrej's patch adds a check on user input, and my patch ensures we don't look past the end of a buffer. Both patches are quite small and pass the selinux-testsuite" * tag 'selinux-pr-20181115' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix non-MLS handling in mls_context_to_sid() selinux: check length properly in SCTP bind hook 15 November 2018, 17:26:09 UTC
282fd2a Linus Torvalds 15 November 2018, 17:20:06 UTC Merge tag 'pinctrl-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - A bunch of fixes for the Allwinner meson platform - Establish a git repo for Intel pin control in MAINTAINERS * tag 'pinctrl-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: MAINTAINERS: Add tree link for Intel pin control driver pinctrl: meson: fix meson8b ao pull register bits pinctrl: meson: fix meson8 ao pull register bits pinctrl: meson: fix gxl ao pull register bits pinctrl: meson: fix gxbb ao pull register bits pinctrl: meson: fix pinconf bias disable 15 November 2018, 17:20:06 UTC
94ca5c1 Linus Torvalds 15 November 2018, 16:59:37 UTC Merge tag 'nfs-for-4.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - Don't exit the NFSv4 state manager without clearing NFS4CLNT_MANAGER_RUNNING Bugfixes: - Fix an Oops when destroying the RPCSEC_GSS credential cache - Fix an Oops during delegation callbacks - Ensure that the NFSv4 state manager exits the loop on SIGKILL - Fix a bogus get/put in generic_key_to_expire()" * tag 'nfs-for-4.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix an Oops during delegation callbacks SUNRPC: Fix a bogus get/put in generic_key_to_expire() SUNRPC: Fix a Oops when destroying the RPCSEC_GSS credential cache NFSv4: Ensure that the state manager exits the loop on SIGKILL NFSv4: Don't exit the state manager without clearing NFS4CLNT_MANAGER_RUNNING 15 November 2018, 16:59:37 UTC
9826b11 Dave Airlie 15 November 2018, 16:14:42 UTC Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-fixes Fixes for 4.20: - Fix for huge page handling that caused a GPUVM fault in some cases - Fix IH ring setup - Fix for xgmi aperture setup - Fix for watermark setup for SMU Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114171853.2866-1-alexander.deucher@amd.com 15 November 2018, 16:15:00 UTC
7b74026 Dave Airlie 15 November 2018, 16:12:27 UTC Merge tag 'drm-misc-fixes-2018-11-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Cross-subsystem: - omap: Instantiate dss children in omapdss instead of mach (Laurent) Other: - htmldocs build warning (Sean) - MST NULL deref fix (Stanislav) - omap: Various runtime ref gets on probe/bind (Laurent) - omap: Fix to the above dss children patch (Tony) Cc: Sean Paul <sean@poorly.run> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181114204542.GA52569@art_vandelay 15 November 2018, 16:12:43 UTC
b2fed34 Gustavo Romero 15 November 2018, 02:33:30 UTC selftests/powerpc: Adjust wild_bctr to build with old binutils Currently the selftest wild_bctr can fail to build when an old gcc is used, notably on gcc using a binutils version <= 2.27, because the assembler does not support the integer suffix UL. This patch adjusts the wild_bctr test so the REG_POISON value is still treated as an unsigned long for the shifts on compilation but the UL suffix is absent on the stringification, so the inline asm code generated has no UL suffixes. Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com> [mpe: Wrap long line] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 15 November 2018, 12:05:17 UTC
6e8adf6 Ville Syrjälä 14 November 2018, 13:32:55 UTC drm/i915: Account for scale factor when calculating initial phase To get the initial phase correct we need to account for the scale factor as well. I forgot this initially and was mostly looking at heavily upscaled content where the minor difference between -0.5 and the proper initial phase was not readily apparent. And let's toss in a comment that tries to explain the formula a little bit. v2: The initial phase upper limit is 1.5, not 24.0! Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 0a59952b24e2 ("drm/i915: Configure SKL+ scaler initial phase correctly") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181029181820.21956-1-ville.syrjala@linux.intel.com Tested-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc (cherry picked from commit e7a278a329dd8aa2c70c564849f164cb5673689c) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> 15 November 2018, 11:57:20 UTC
27971d6 Ville Syrjälä 14 November 2018, 11:49:24 UTC drm/i915: Clean up skl_program_scaler() Remove the "sizes are 0 based" stuff that is not even true for the scaler. v2: Rebase Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101151736.20522-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (cherry picked from commit d0105af939769393d6447a04cee2d1ae12e3f09a) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> 15 November 2018, 11:56:53 UTC
2a27779 Maarten Lankhorst 14 November 2018, 11:49:23 UTC drm/i915: Move programming plane scaler to its own function. This cleans the code up slightly, and will make other changes easier. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920102711.4184-8-maarten.lankhorst@linux.intel.com (cherry picked from commit ab5c60bf76755d24ae8de5c1c6ac594934656ace) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> 15 November 2018, 11:56:14 UTC
63eb322 Ard Biesheuvel 14 November 2018, 17:55:44 UTC efi: Permit calling efi_mem_reserve_persistent() from atomic context Currently, efi_mem_reserve_persistent() may not be called from atomic context, since both the kmalloc() call and the memremap() call may sleep. The kmalloc() call is easy enough to fix, but the memremap() call needs to be moved into an init hook since we cannot control the memory allocation behavior of memremap() at the call site. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181114175544.12860-6-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 15 November 2018, 09:04:47 UTC
eff8962 Ard Biesheuvel 14 November 2018, 17:55:43 UTC efi/arm: Defer persistent reservations until after paging_init() The new memory EFI reservation feature we introduced to allow memory reservations to persist across kexec may trigger an unbounded number of calls to memblock_reserve(). The memblock subsystem can deal with this fine, but not before memblock resizing is enabled, which we can only do after paging_init(), when the memory we reallocate the array into is actually mapped. So break out the memreserve table processing into a separate routine and call it after paging_init() on arm64. On ARM, because of limited reviewing bandwidth of the maintainer, we cannot currently fix this, so instead, disable the EFI persistent memreserve entirely on ARM so we can fix it later. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181114175544.12860-5-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 15 November 2018, 09:04:46 UTC
72a58a6 Ard Biesheuvel 14 November 2018, 17:55:42 UTC efi/arm/libstub: Pack FDT after populating it Commit: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size") increased the allocation size for the FDT image created by the stub to a fixed value of 2 MB, to simplify the former code that made several attempts with increasing values for the size. This is reasonable given that the allocation is of type EFI_LOADER_DATA, which is released to the kernel unless it is explicitly memblock_reserve()d by the early boot code. However, this allocation size leaked into the 'size' field of the FDT header metadata, and so the entire allocation remains occupied by the device tree binary, even if most of it is not used to store device tree information. So call fdt_pack() to shrink the FDT data structure to its minimum size after populating all the fields, so that the remaining memory is no longer wasted. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> # v4.12+ Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 24d7c494ce46 ("efi/arm-stub: Round up FDT allocation to mapping size") Link: http://lkml.kernel.org/r/20181114175544.12860-4-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 15 November 2018, 09:04:46 UTC
33412b8 Ard Biesheuvel 14 November 2018, 17:55:41 UTC efi/arm: Revert deferred unmap of early memmap mapping Commit: 3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory map longer for BGRT") deferred the unmap of the early mapping of the UEFI memory map to accommodate the ACPI BGRT code, which looks up the memory type that backs the BGRT table to validate it against the requirements of the UEFI spec. Unfortunately, this causes problems on ARM, which does not permit early mappings to persist after paging_init() is called, resulting in a WARN() splat. Since we don't support the BGRT table on ARM anway, let's revert ARM to the old behaviour, which is to take down the early mapping at the end of efi_init(). Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory ...") Link: http://lkml.kernel.org/r/20181114175544.12860-3-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 15 November 2018, 09:04:46 UTC
ef1491e Waiman Long 14 November 2018, 17:55:40 UTC efi: Fix debugobjects warning on 'efi_rts_work' The following commit: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler") converted 'efi_rts_work' from an auto variable to a global variable. However, when submitting the work, INIT_WORK_ONSTACK() was still used, causing the following complaint from debugobjects: ODEBUG: object 00000000ed27b500 is NOT on stack 00000000c7d38760, but annotated. Change the macro to just INIT_WORK() to eliminate the warning. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler") Link: http://lkml.kernel.org/r/20181114175544.12860-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 15 November 2018, 09:04:45 UTC
f8504f4 Xin Long 12 November 2018, 17:08:25 UTC l2tp: fix a sock refcnt leak in l2tp_tunnel_register This issue happens when trying to add an existent tunnel. It doesn't call sock_put() before returning -EEXIST to release the sock refcnt that was held by calling sock_hold() before the existence check. This patch is to fix it by holding the sock after doing the existence check. Fixes: f6cd651b056f ("l2tp: fix race in duplicate tunnel detection") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2018, 06:49:31 UTC
66f93c5 Nicholas Piggin 15 November 2018, 02:34:27 UTC powerpc/64: Fix kernel stack 16-byte alignment Commit 4c2de74cc869 ("powerpc/64: Interrupts save PPR on stack rather than thread_struct") changed sizeof(struct pt_regs) % 16 from 0 to 8, which causes the interrupt frame allocation on kernel entry to put the kernel stack out of alignment. Quadword (16-byte) alignment for the stack is required by both the 64-bit v1 ABI (v1.9 § 3.2.2) and the 64-bit v2 ABI (v1.1 § 2.2.2.1). Add a pad field to fix alignment, and add a BUILD_BUG_ON to catch this in future. Fixes: 4c2de74cc869 ("powerpc/64: Interrupts save PPR on stack rather than thread_struct") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 15 November 2018, 03:48:43 UTC
5929a1f Linus Torvalds 14 November 2018, 23:14:40 UTC Merge tag 'riscv-for-linus-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V fixes from Palmer Dabbelt: "This contains a few patches that fix various issues in the RISC-V port: - enable printk timestamps in the RISC-V defconfig. - a whitespace fix to "struct pt_regs". - add a "vdso_install" target for RISC-V. - a pair of build fixes: one to fix a typo in our makefile, and one to clean up some warnings. There will probably be more patches from us for 4.20, but I don't have anything that's ready to go right now so I'm going to hold off a bit. Right now the only concrete thing I know I want to make sure gets sorted out is our 32-bit stat interface, which I don't want sitting in limbo for another cycle as we have to get RV32I glibc sone" * tag 'riscv-for-linus-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: RISC-V: Silence some module warnings on 32-bit RISC-V: lib: Fix build error for 64-bit riscv: add missing vdso_install target riscv: fix spacing in struct pt_regs RISC-V: defconfig: Enable printk timestamps 14 November 2018, 23:14:40 UTC
9746e46 Linus Torvalds 14 November 2018, 23:07:01 UTC Merge tag 'kgdb-fixes-4.20-rc3' of https://git.linaro.org/people/daniel.thompson/linux Pull kgdb fixes from Daniel Thompson: "The most important changes here are two fixes for kdb regressions causes by the hashing of %p pointers together with a fix for a potential overflow in kdb tab completion handling (and warning fix). Also included are a set of changes in preparation to (eventually) enable -Wimplicit-fallthrough" * tag 'kgdb-fixes-4.20-rc3' of https://git.linaro.org/people/daniel.thompson/linux: kdb: kdb_support: mark expected switch fall-throughs kdb: kdb_keyboard: mark expected switch fall-throughs kdb: kdb_main: refactor code in kdb_md_line kdb: Use strscpy with destination buffer size kdb: print real address of pointers instead of hashed addresses kdb: use correct pointer when 'btc' calls 'btt' 14 November 2018, 23:07:01 UTC
e4c4b0e Linus Torvalds 14 November 2018, 23:03:24 UTC Merge branch 'fixes-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull integrity fix from James Morris: "Fix a bug introduced with in this merge window in 82f94f24475c ("KEYS: Provide software public key query function [ver #2]")" * 'fixes-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: integrity: support new struct public_key_signature encoding field 14 November 2018, 23:03:24 UTC
007b656 Ursula Braun 12 November 2018, 16:06:12 UTC s390/ism: clear dmbe_mask bit before SMC IRQ handling SMC-D stress workload showed connection stalls. Since the firmware decides to skip raising an interrupt if the SBA DMBE mask bit is still set, this SBA DMBE mask bit should be cleared before the IRQ handling in the SMC code runs. Otherwise there are small windows possible with missing interrupts for incoming data. SMC-D currently does not care about the old value of the SBA DMBE mask. Acked-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 November 2018, 22:21:20 UTC
3472f66 Linus Torvalds 14 November 2018, 21:36:45 UTC Merge tag 'acpi-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a recently introduced build issue in the xpower PMIC driver (Arnd Bergmann)" * tag 'acpi-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PMIC: xpower: fix IOSF_MBI dependency 14 November 2018, 21:36:45 UTC
dbb3c26 Linus Torvalds 14 November 2018, 21:33:45 UTC Merge tag 'pm-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These remove a stale DT entry left behind after recent removal of a cpufreq driver without users, fix up error handling in the imx6q cpufreq driver, fix two issues in the cpufreq documentation, and update the ARM cpufreq driver. Specifics: - Drop stale DT binding for the arm_big_little_dt driver removed recently (Sudeep Holla). - Fix up error handling in the imx6q cpufreq driver to make it report voltage scaling failures (Anson Huang). - Fix two issues in the cpufreq documentation (Viresh Kumar, Zhao Wei Liew). - Fix ARM cpuidle driver initialization regression from the 4.19 time frame and rework the driver registration part of it to simplify code (Ulf Hansson)" * tag 'pm-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ARM: cpuidle: Convert to use cpuidle_register|unregister() ARM: cpuidle: Don't register the driver when back-end init returns -ENXIO dt-bindings: cpufreq: remove stale arm_big_little_dt entry Documentation: cpufreq: Correct a typo cpufreq: imx6q: add return value check for voltage scale Documentation: cpu-freq: Frequencies aren't always sorted 14 November 2018, 21:33:45 UTC
4e4490d Linus Torvalds 14 November 2018, 21:31:15 UTC Merge tag 'nfsd-4.20-1' of git://linux-nfs.org/~bfields/linux Pull nfsd fixes from Bruce Fields: "Three nfsd bugfixes. None are new bugs, but they all take a little effort to hit, which might explain why they weren't found sooner" * tag 'nfsd-4.20-1' of git://linux-nfs.org/~bfields/linux: SUNRPC: drop pointless static qualifier in xdr_get_next_encode_buffer() nfsd: COPY and CLONE operations require the saved filehandle to be set sunrpc: correct the computation for page_ptr when truncating 14 November 2018, 21:31:15 UTC
d41217a Linus Torvalds 14 November 2018, 19:51:47 UTC Merge tag 'pci-v4.20-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Revert a _PXM change that causes silent early boot failure on some AMD ThreadRipper systems" * tag 'pci-v4.20-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "ACPI/PCI: Pay attention to device-specific _PXM node values" 14 November 2018, 19:51:47 UTC
dbcec2e Linus Torvalds 14 November 2018, 19:49:29 UTC Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is mostly a set of minor and obvious fixes (three in one of the new drivers). The only substantial change is to move the ufs to the blk-mq now that the merge window fixed the suspend/resume issues with blk-mq" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Initialize port speed to avoid setting lower speed Revert "scsi: ufs: Disable blk-mq for now" scsi: NCR5380: Return false instead of NULL scsi: qla2xxx: Fix a typo in MODULE_PARM_DESC scsi: hisi_sas: Remove set but not used variable 'dq_list' scsi: myrs: only build on little-endian platforms scsi: myrs: avoid stack overflow warning scsi: lpfc: fix remoteport access scsi: myrb: fix sprintf buffer overflow warning scsi: target/core: Avoid that a kernel oops is triggered when COMPARE AND WRITE fails 14 November 2018, 19:49:29 UTC
b7bbf99 Linus Torvalds 14 November 2018, 19:47:15 UTC Merge tag 'rtc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC driver fixes from Alexandre Belloni: - cmos: stop exporting alarms when not supported - hctosys: correctly report range error - pcf2127: fix a memory leak * tag 'rtc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: pcf2127: fix a kmemleak caused in pcf2127_i2c_gather_write rtc: hctosys: Add missing range error reporting rtc: cmos: Do not export alarm rtc_ops when we do not support alarms 14 November 2018, 19:47:15 UTC
47e624c Linus Torvalds 14 November 2018, 19:44:52 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace fix from Eric Biederman: "Benjamin Coddington noticed an unkillable busy loop in the kernel that anyone who is sufficiently motivated can trigger. This bug did not exist in earlier kernels making this bug a regression. I have tested the change personally and confirmed that the bug exists and that the fix works. This fix has been picked up by linux-next and hopefully the automated testing bots and no problems have been reported from those sources. Ordinarily I would let something like this sit a little longer but I am going to be away at Linux Plumbers the rest of this week and I am afraid if I don't send the pull request now this fix will get lost" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: mnt: fix __detach_mounts infinite loop 14 November 2018, 19:44:52 UTC
857c34c Linus Torvalds 14 November 2018, 19:42:41 UTC Merge branch 'parisc-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "Revert one patch which changed how spinlocks get released. It breaks the rwlock implementation in glibc" * 'parisc-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Revert "Release spinlocks using ordered store" 14 November 2018, 19:42:41 UTC
e2f8b47 Linus Torvalds 14 November 2018, 19:40:22 UTC Merge branch 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm Pull ARM fix from Russell King: "It was noticed that one of Julien's patches contained an error, this fixes that up" * 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8810/1: vfp: Fix wrong assignement to ufp_exc 14 November 2018, 19:40:22 UTC
8dc765d Ming Lei 14 November 2018, 08:25:51 UTC SCSI: fix queue cleanup race before queue initialization is done c2856ae2f315d ("blk-mq: quiesce queue before freeing queue") has already fixed this race, however the implied synchronize_rcu() in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused performance regression. Then 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()") tried to quiesce queue for avoiding unnecessary synchronize_rcu() only when queue initialization is done, because it is usual to see lots of inexistent LUNs which need to be probed. However, turns out it isn't safe to quiesce queue only when queue initialization is done. Because when one SCSI command is completed, the user of sending command can be waken up immediately, then the scsi device may be removed, meantime the run queue in scsi_end_request() is still in-progress, so kernel panic can be caused. In Red Hat QE lab, there are several reports about this kind of kernel panic triggered during kernel booting. This patch tries to address the issue by grabing one queue usage counter during freeing one request and the following run queue. Fixes: 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()") Cc: Andrew Jones <drjones@redhat.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: linux-scsi@vger.kernel.org Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: stable <stable@vger.kernel.org> Cc: jianchao.wang <jianchao.w.wang@oracle.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 14 November 2018, 15:19:10 UTC
back to top