Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
2c19269 Rob Herring 10 March 2015, 14:03:04 UTC Merge tag 'v4.0-rc3' into HEAD Linux 4.0-rc3 Merging in v4.0-rc3 because commit 30a22c215a00 (console: Fix console name size mismatch) is a dependency. 10 March 2015, 14:03:04 UTC
5e4f518 Chris Wilson 13 February 2015, 14:35:59 UTC drm/i915: Prevent TLB error on first execution on SNB Long ago I found that I was getting sporadic errors when booting SNB, with the symptom being that the first batch died with IPEHR != *ACTHD, typically caused by the TLB being invalid. These magically disappeared if I held the forcewake during the entire ring initialisation sequence. (It can probably be shortened to a short critical section, but the whole initialisation is full of register writes and so we would be taking and releasing forcewake almost continually, and so holding it over the entire sequence will probably be a net win!) Note some of the kernels I encounted the issue already had the deferred forcewake release, so it is still relevant. I know that there have been a few other reports with similar failure conditions on SNB, I think such as References: https://bugs.freedesktop.org/show_bug.cgi?id=80913 v2: Wrap i915_gem_init_hw() with its own security blanket as we take that path following resume and reset. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> 10 March 2015, 13:30:23 UTC
0cd0caa Mika Kuoppala 27 February 2015, 16:11:09 UTC drm/i915: Do both mt and gen6 style forcewake reset on ivb probe commit 05a2fb157e44 ("drm/i915: Consolidate forcewake code") failed to take into account that we have used to reset both the gen6 style and the multithreaded style forcewake registers. This is due to fact that ivb can use either, depending on how the bios has set up the machine. Mimic the old semantics before we have determined the correct variety and reset both before the ecobus probe. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> 10 March 2015, 09:56:57 UTC
762e458 Chris Wilson 04 March 2015, 18:09:26 UTC drm/i915: Make WAIT_IOCTL negative timeouts be indefinite again This fixes a regression from commit 5ed0bdf21a85d78e04f89f15ccf227562177cbd9 Author: Thomas Gleixner <tglx@linutronix.de> Date: Wed Jul 16 21:05:06 2014 +0000 drm: i915: Use nsec based interfaces that made a negative timeout return immediately rather than the previously defined behaviour of waiting indefinitely. Testcase: igt/gem_wait Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89494 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Kristian Høgsberg <krh@bitplanet.net> Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> [Jani: fixed a checkpatch complaint about whitespace.] Signed-off-by: Jani Nikula <jani.nikula@intel.com> 10 March 2015, 09:55:03 UTC
6c51d46 Dave Gordon 06 March 2015, 15:34:26 UTC drm/i915: use in_interrupt() not in_irq() to check context The kernel in_irq() function tests for hard-IRQ context only, so if a system is run with the kernel 'threadirqs' option selected, the test in intel_check_page_flip() generates lots of warnings, because then it gets called in soft-IRQ context. We can instead use in_interrupt() which allows for either type of interrupt, while still detecting and complaining about misuse of the page flip code if it is ever called from non-interrupt context. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89321 Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> 10 March 2015, 09:16:54 UTC
cd961bb Daniel Vetter 28 January 2015, 09:02:23 UTC drm/mst: fix recursive sleep warning on qlock With drm-next, we can get a backtrace from sleeping with mutex detection. this is due to the callback checking the txmsg state taking the mutex, which can cause a sleep inside a sleep, Daniel went over it and was happy we could drop this mutex in this case. Signed-off-by: Dave Airlie <airlied@redhat.com> 10 March 2015, 03:44:31 UTC
affb817 Linus Torvalds 10 March 2015, 01:59:50 UTC Merge git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm/s390 bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: non-LPAR case obsolete during facilities mask init KVM: s390: include guest facilities in kvm facility test KVM: s390: fix in memory copy of facility lists KVM: s390/cpacf: Fix kernel bug under z/VM KVM: s390/cpacf: Enable key wrapping by default 10 March 2015, 01:59:50 UTC
ec0e6bd Linus Torvalds 10 March 2015, 01:55:52 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "One performance optimization for page_clear and a couple of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: fix incorrect ASCE after crst_table_downgrade s390/ftrace: fix crashes when switching tracers / add notrace to cpu_relax() s390/pci: unify pci_iomap symbol exports s390/pci: fix [un]map_resources sequence s390: let the compiler do page clearing s390/pci: fix possible information leak in mmio syscall s390/dcss: array index 'i' is used before limits check. s390/scm_block: fix off by one during cluster reservation s390/jump label: improve and fix sanity check s390/jump label: add missing jump_label_apply_nops() call 10 March 2015, 01:55:52 UTC
9a6f513 Chris Wilson 25 February 2015, 13:45:26 UTC drm: Don't assign fbs for universal cursor support to files The internal framebuffers we create to remap legacy cursor ioctls to plane operations for the universal plane support shouldn't be linke to the file like normal userspace framebuffers. This bug goes back to the original universal cursor plane support introduced in commit 161d0dc1dccb17ff7a38f462c7c0d4ef8bcc5662 Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Jun 10 08:28:10 2014 -0700 drm: Support legacy cursor ioctls via universal planes when possible (v4) The isn't too disastrous since fbs are small, we only create one when the cursor bo gets changed and ultimately they'll be reaped when the window server restarts. Conceptually we'd want to just pass NULL for file_priv when creating it, but the driver needs the file to lookup the underlying buffer object for cursor id. Instead let's move the file_priv linking out of add_framebuffer_internal() into the addfb ioctl implementation, which is the only place it is needed. And also rename the function for a more accurate since it only creates the fb, but doesn't add it anywhere. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> (fix & commit msg) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (provider of lipstick) Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 10 March 2015, 01:51:00 UTC
e7901af Linus Torvalds 10 March 2015, 01:44:06 UTC Merge tag 'trace-fixes-v4.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull seq-buf/ftrace fixes from Steven Rostedt: "This includes fixes for seq_buf_bprintf() truncation issue. It also contains fixes to ftrace when /proc/sys/kernel/ftrace_enabled and function tracing are started. Doing the following causes some issues: # echo 0 > /proc/sys/kernel/ftrace_enabled # echo function_graph > /sys/kernel/debug/tracing/current_tracer # echo 1 > /proc/sys/kernel/ftrace_enabled # echo nop > /sys/kernel/debug/tracing/current_tracer # echo function_graph > /sys/kernel/debug/tracing/current_tracer As well as with function tracing too. Pratyush Anand first reported this issue to me and supplied a patch. When I tested this on my x86 test box, it caused thousands of backtraces and warnings to appear in dmesg, which also caused a denial of service (a warning for every function that was listed). I applied Pratyush's patch but it did not fix the issue for me. I looked into it and found a slight problem with trampoline accounting. I fixed it and sent Pratyush a patch, but he said that it did not fix the issue for him. I later learned tha Pratyush was using an ARM64 server, and when I tested on my ARM board, I was able to reproduce the same issue as Pratyush. After applying his patch, it fixed the problem. The above test uncovered two different bugs, one in x86 and one in ARM and ARM64. As this looked like it would affect PowerPC, I tested it on my PPC64 box. It too broke, but neither the patch that fixed ARM or x86 fixed this box (the changes were all in generic code!). The above test, uncovered two more bugs that affected PowerPC. Again, the changes were only done to generic code. It's the way the arch code expected things to be done that was different between the archs. Some where more sensitive than others. The rest of this series fixes the PPC bugs as well" * tag 'trace-fixes-v4.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix ftrace enable ordering of sysctl ftrace_enabled ftrace: Fix en(dis)able graph caller when en(dis)abling record via sysctl ftrace: Clear REGS_EN and TRAMP_EN flags on disabling record via sysctl seq_buf: Fix seq_buf_bprintf() truncation seq_buf: Fix seq_buf_vprintf() truncation 10 March 2015, 01:44:06 UTC
36bef88 Linus Torvalds 10 March 2015, 01:17:21 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) nft_compat accidently truncates ethernet protocol to 8-bits, from Arturo Borrero. 2) Memory leak in ip_vs_proc_conn(), from Julian Anastasov. 3) Don't allow the space required for nftables rules to exceed the maximum value representable in the dlen field. From Patrick McHardy. 4) bcm63xx_enet can accidently leave interrupts permanently disabled due to errors in the NAPI polling exit logic. Fix from Nicolas Schichan. 5) Fix OOPSes triggerable by the ping protocol module, due to missing address family validations etc. From Lorenzo Colitti. 6) Don't use RCU locking in sleepable context in team driver, from Jiri Pirko. 7) xen-netback miscalculates statistic offset pointers when reporting the stats to userspace. From David Vrabel. 8) Fix a leak of up to 256 pages per VIF destroy in xen-netaback, also from David Vrabel. 9) ip_check_defrag() cannot assume that skb_network_offset(), particularly when it is used by the AF_PACKET fanout defrag code. From Alexander Drozdov. 10) gianfar driver doesn't query OF node names properly when trying to determine the number of hw queues available. Fix it to explicitly check for OF nodes named queue-group. From Tobias Waldekranz. 11) MID field in macb driver should be 12 bits, not 16. From Punnaiah Choudary Kalluri. 12) Fix unintentional regression in traceroute due to timestamp socket option changes. Empty ICMP payloads should be allowed in non-timestamp cases. From Willem de Bruijn. 13) When devices are unregistered, we have to get rid of AF_PACKET multicast list entries that point to it via ifindex. Fix from Francesco Ruggeri. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) tipc: fix bug in link failover handling net: delete stale packet_mclist entries net: macb: constify macb configuration data MAINTAINERS: add Marc Kleine-Budde as co maintainer for CAN networking layer MAINTAINERS: linux-can moved to github can: kvaser_usb: Read all messages in a bulk-in URB buffer can: kvaser_usb: Avoid double free on URB submission failures can: peak_usb: fix missing ctrlmode_ init for every dev can: add missing initialisations in CAN related skbuffs ip: fix error queue empty skb handling bgmac: Clean warning messages tcp: align tcp_xmit_size_goal() on tcp_tso_autosize() net: fec: fix unbalanced clk disable on driver unbind net: macb: Correct the MID field length value net: gianfar: correctly determine the number of queue groups ipv4: ip_check_defrag should not assume that skb_network_offset is zero net: bcmgenet: properly disable password matching net: eth: xgene: fix booting with devicetree bnx2x: Force fundamental reset for EEH recovery xen-netback: refactor xenvif_handle_frag_list() ... 10 March 2015, 01:17:21 UTC
e93df63 Linus Torvalds 10 March 2015, 01:06:13 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Miscellaneous driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: psmouse - disable "palm detection" in the focaltech driver Input: psmouse - disable changing resolution/rate/scale for FocalTech Input: psmouse - ensure that focaltech reports consistent coordinates Input: psmouse - remove hardcoded touchpad size from the focaltech driver Input: tc3589x-keypad - set IRQF_ONESHOT flag to ensure IRQ request Input: ALPS - fix memory leak when detection fails Input: sun4i-ts - add thermal driver dependency Input: cyapa - remove superfluous type check in cyapa_gen5_read_idac_data() Input: cyapa - fix unaligned functions redefinition error Input: mma8450 - add parent device 10 March 2015, 01:06:13 UTC
068c65c Linus Torvalds 10 March 2015, 01:00:25 UTC Merge tag 'regulator-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of driver specific fixes plus a fix for a regression in the core where the updates to use sysfs group registration were overly enthusiastic in eliding properties and removed some that had been previously present" * tag 'regulator-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix regression due to NULL constraints check regulator: rk808: Set the enable time for LDOs regulator: da9210: Mask all interrupt sources to deassert interrupt line 10 March 2015, 01:00:25 UTC
d08edd8 Linus Torvalds 10 March 2015, 00:50:02 UTC Merge tag 'spi-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A collection of driver specific fixes to which the usual comments about them being important if you see them mostly apply (except for the comment fix). The pl022 one is particularly nasty for anyone affected by it" * tag 'spi-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: pl022: Fix race in giveback() leading to driver lock-up spi: dw-mid: avoid potential NULL dereference spi: img-spfi: Verify max spfi transfer length spi: fix a typo in comment. spi: atmel: Fix interrupt setup for PDC transfers spi: dw: revisit FIFO size detection again spi: dw-pci: correct number of chip selects drivers: spi: ti-qspi: wait for busy bit clear before data write/read 10 March 2015, 00:50:02 UTC
eca8dac Linus Torvalds 10 March 2015, 00:45:34 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull tpm fixes from James Morris: "fixes for the TPM driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: fix call order in tpm-chip.c tpm/ibmvtpm: Additional LE support for tpm_ibmvtpm_send 10 March 2015, 00:45:34 UTC
ecddad6 Linus Torvalds 10 March 2015, 00:35:29 UTC Merge tag 'fbdev-fixes-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: - Fix regression in with omapdss when using i2c displays - Fix possible null deref in fbmon - Check kalloc return value in AMBA CLCD * tag 'fbdev-fixes-4.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: OMAPDSS: fix regression with display sysfs files video: fbdev: fix possible null dereference video: ARM CLCD: Add missing error check for devm_kzalloc 10 March 2015, 00:35:29 UTC
c0e99a7 Linus Torvalds 10 March 2015, 00:30:09 UTC Merge branch 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "The cgroup iteration update two years ago and the recent cpuset restructuring introduced regressions in subset of cpuset configurations. Three patches to fix them. All are marked for -stable" * 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: Fix cpuset sched_relax_domain_level cpuset: fix a warning when clearing configured masks in old hierarchy cpuset: initialize effective masks when clone_children is enabled 10 March 2015, 00:30:09 UTC
f930713 Linus Torvalds 10 March 2015, 00:23:30 UTC Merge branch 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixlet from Tejun Heo: "Speed limiting fix for sata_fsl" * 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata-fsl: Apply link speed limits 10 March 2015, 00:23:30 UTC
b695f31 Linus Torvalds 10 March 2015, 00:00:54 UTC Merge branch 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: "One fix patch for a subtle livelock condition which can happen on PREEMPT_NONE kernels involving two racing cancel_work calls. Whoever comes in the second has to wait for the previous one to finish. This was implemented by making the later one block for the same condition that the former would be (work item completion) and then loop and retest; unfortunately, depending on the wake up order, the later one could lock out the former one to finish by busy looping on the cpu. This is fixed by implementing explicit wait mechanism. Work item might not belong anywhere at this point and there's remote possibility of thundering herd problem. I originally tried to use bit_waitqueue but it didn't work for static work items on modules. It's currently using single wait queue with filtering wake up function and exclusive wakeup. If this ever becomes a problem, which is not very likely, we can try to figure out a way to piggy back on bit_waitqueue" * 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix hang involving racing cancel[_delayed]_work_sync()'s for PREEMPT_NONE 10 March 2015, 00:00:54 UTC
fcf0789 Heikki Krogerus 06 March 2015, 13:48:38 UTC ACPI / LPSS: provide con_id for the clkdev Commit 7d78cbefaa (serial: 8250_dw: add ability to handle the peripheral clock) introduces handling for a second clk to 8250_dw.c which is the driver also for LPSS UART. The second clk forces us to provide identifier (con_id) for the clkdev we create. This fixes an issue where 8250_dw.c is getting the same handler for both clocks. Fixes: 7d78cbefaa (serial: 8250_dw: add ability to handle the peripheral clock) Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: 3.17+ <stable@vger.kernel.org> # 3.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 09 March 2015, 23:28:43 UTC
9315514 Uwe Kleine-König 21 February 2015, 10:40:25 UTC clk: divider: fix calculation of initial best divider when rounding to closest Similar to the reasoning for the previous commit DIV_ROUND_CLOSEST(parent_rate, rate) might not be the best integer divisor to get a good approximation for rate from parent_rate (given the metric for CLK_DIVIDER_ROUND_CLOSEST). For example assume a parent rate of 1000 Hz and a target rate of 700. Using DIV_ROUND_CLOSEST the suggested divisor gets calculated to 1 resulting in a target rate of 1000 with a delta of 300 to the desired rate. With choosing 2 as divisor however the resulting rate is 500 which is nearer to 700. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Michael Turquette <mturquette@linaro.org> 09 March 2015, 21:20:17 UTC
26bac95 Uwe Kleine-König 21 February 2015, 10:40:24 UTC clk: divider: fix selection of divider when rounding to closest It's an invalid approach to assume that among two divider values the one nearer the exact divider is the better one. Assume a parent rate of 1000 Hz, a divider with CLK_DIVIDER_POWER_OF_TWO and a target rate of 89 Hz. The exact divider is ~ 11.236 so 8 and 16 are the candidates to choose from yielding rates 125 Hz and 62.5 Hz respectivly. While 8 is nearer to 11.236 than 16 is, the latter is still the better divider as 62.5 is nearer to 89 than 125 is. Fixes: 774b514390b1 (clk: divider: Add round to closest divider) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Michael Turquette <mturquette@linaro.org> 09 March 2015, 21:19:54 UTC
da32113 Uwe Kleine-König 21 February 2015, 10:40:23 UTC clk: divider: fix calculation of maximal parent rate for a given divider The rate provided at the output of a clk-divider is calculated as: DIV_ROUND_UP(parent_rate, div) since commit b11d282dbea2 (clk: divider: fix rate calculation for fractional rates). So to yield a rate not bigger than r parent_rate must be <= r * div. The effect of choosing a parent rate that is too big as was done before this patch results in wrongly ruling out good dividers. Note that this is not a complete fix as __clk_round_rate might return a value >= its 2nd parameter. Also for dividers with CLK_DIVIDER_ROUND_CLOSEST set the calculation is not accurate. But this fixes the test case by Sascha Hauer that uses a chain of three dividers under a fixed clock. Fixes: b11d282dbea2 (clk: divider: fix rate calculation for fractional rates) Suggested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Michael Turquette <mturquette@linaro.org> 09 March 2015, 21:19:27 UTC
e6441ba Jon Paul Maloy 09 March 2015, 20:16:22 UTC tipc: fix bug in link failover handling In commit c637c1035534867b85b78b453c38c495b58e2c5a ("tipc: resolve race problem at unicast message reception") we introduced a new mechanism for delivering buffers upwards from link to socket layer. That code contains a bug in how we handle the new link input queue during failover. When a link is reset, some of its users may be blocked because of congestion, and in order to resolve this, we add any pending wakeup pseudo messages to the link's input queue, and deliver them to the socket. This misses the case where the other, remaining link also may have congested users. Currently, the owner node's reference to the remaining link's input queue is unconditionally overwritten by the reset link's input queue. This has the effect that wakeup events from the remaining link may be unduely delayed (but not lost) for a potentially long period. We fix this by adding the pending events from the reset link to the input queue that is currently referenced by the node, whichever one it is. This commit should be applied to both net and net-next. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 March 2015, 20:20:41 UTC
82f1709 Francesco Ruggeri 09 March 2015, 18:51:04 UTC net: delete stale packet_mclist entries When an interface is deleted from a net namespace the ifindex in the corresponding entries in PF_PACKET sockets' mclists becomes stale. This can create inconsistencies if later an interface with the same ifindex is moved from a different namespace (not that unlikely since ifindexes are per-namespace). In particular we saw problems with dev->promiscuity, resulting in "promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken" warnings and EOVERFLOW failures of setsockopt(PACKET_ADD_MEMBERSHIP). This patch deletes the mclist entries for interfaces that are deleted. Since this now causes setsockopt(PACKET_DROP_MEMBERSHIP) to fail with EADDRNOTAVAIL if called after the interface is deleted, also make packet_mc_drop not fail. Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 March 2015, 20:17:43 UTC
0b2eb3e Josh Cartwright 09 March 2015, 16:14:39 UTC net: macb: constify macb configuration data The configurations are not modified by the driver. Make them 'const' so that they may be placed in a read-only section. Signed-off-by: Josh Cartwright <joshc@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 March 2015, 19:53:42 UTC
d037250 David S. Miller 09 March 2015, 19:41:00 UTC Merge tag 'linux-can-fixes-for-4.0-20150309' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2015-03-09 this is a pull request for net/master for the 4.0 release cycle, it consists of 6 patches: A patch by Oliver Hartkopp fixes a long outstanding bug in the infrastructure, which leads to skb_under_panics when CAN interfaces are used by AF_PACKET sockets e.g. by dhclient. Stephane Grosjean contributes a patch for the peak_usb driver which adds a missing initialization. Two patches by Ahmed S. Darwish fix problems in the kvaser_usb driver. Followed by two patches by myself, updating the MAINTAINERS file ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 09 March 2015, 19:41:00 UTC
524a386 Steven Rostedt (Red Hat) 07 March 2015, 00:55:13 UTC ftrace: Fix ftrace enable ordering of sysctl ftrace_enabled Some archs (specifically PowerPC), are sensitive with the ordering of the enabling of the calls to function tracing and setting of the function to use to be traced. That is, update_ftrace_function() sets what function the ftrace_caller trampoline should call. Some archs require this to be set before calling ftrace_run_update_code(). Another bug was discovered, that ftrace_startup_sysctl() called ftrace_run_update_code() directly. If the function the ftrace_caller trampoline changes, then it will not be updated. Instead a call to ftrace_startup_enable() should be called because it tests to see if the callback changed since the code was disabled, and will tell the arch to update appropriately. Most archs do not need this notification, but PowerPC does. The problem could be seen by the following commands: # echo 0 > /proc/sys/kernel/ftrace_enabled # echo function > /sys/kernel/debug/tracing/current_tracer # echo 1 > /proc/sys/kernel/ftrace_enabled # cat /sys/kernel/debug/tracing/trace The trace will show that function tracing was not active. Cc: stable@vger.kernel.org # 2.6.27+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 09 March 2015, 14:55:34 UTC
1619dc3 Pratyush Anand 06 March 2015, 18:28:06 UTC ftrace: Fix en(dis)able graph caller when en(dis)abling record via sysctl When ftrace is enabled globally through the proc interface, we must check if ftrace_graph_active is set. If it is set, then we should also pass the FTRACE_START_FUNC_RET command to ftrace_run_update_code(). Similarly, when ftrace is disabled globally through the proc interface, we must check if ftrace_graph_active is set. If it is set, then we should also pass the FTRACE_STOP_FUNC_RET command to ftrace_run_update_code(). Consider the following situation. # echo 0 > /proc/sys/kernel/ftrace_enabled After this ftrace_enabled = 0. # echo function_graph > /sys/kernel/debug/tracing/current_tracer Since ftrace_enabled = 0, ftrace_enable_ftrace_graph_caller() is never called. # echo 1 > /proc/sys/kernel/ftrace_enabled Now ftrace_enabled will be set to true, but still ftrace_enable_ftrace_graph_caller() will not be called, which is not desired. Further if we execute the following after this: # echo nop > /sys/kernel/debug/tracing/current_tracer Now since ftrace_enabled is set it will call ftrace_disable_ftrace_graph_caller(), which causes a kernel warning on the ARM platform. On the ARM platform, when ftrace_enable_ftrace_graph_caller() is called, it checks whether the old instruction is a nop or not. If it's not a nop, then it returns an error. If it is a nop then it replaces instruction at that address with a branch to ftrace_graph_caller. ftrace_disable_ftrace_graph_caller() behaves just the opposite. Therefore, if generic ftrace code ever calls either ftrace_enable_ftrace_graph_caller() or ftrace_disable_ftrace_graph_caller() consecutively two times in a row, then it will return an error, which will cause the generic ftrace code to raise a warning. Note, x86 does not have an issue with this because the architecture specific code for ftrace_enable_ftrace_graph_caller() and ftrace_disable_ftrace_graph_caller() does not check the previous state, and calling either of these functions twice in a row has no ill effect. Link: http://lkml.kernel.org/r/e4fbe64cdac0dd0e86a3bf914b0f83c0b419f146.1425666454.git.panand@redhat.com Cc: stable@vger.kernel.org # 2.6.31+ Signed-off-by: Pratyush Anand <panand@redhat.com> [ removed extra if (ftrace_start_up) and defined ftrace_graph_active as 0 if CONFIG_FUNCTION_GRAPH_TRACER is not set. ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 09 March 2015, 14:50:51 UTC
b24d443 Steven Rostedt (Red Hat) 05 March 2015, 04:10:28 UTC ftrace: Clear REGS_EN and TRAMP_EN flags on disabling record via sysctl When /proc/sys/kernel/ftrace_enabled is set to zero, all function tracing is disabled. But the records that represent the functions still hold information about the ftrace_ops that are hooked to them. ftrace_ops may request "REGS" (have a full set of pt_regs passed to the callback), or "TRAMP" (the ops has its own trampoline to use). When the record is updated to represent the state of the ops hooked to it, it sets "REGS_EN" and/or "TRAMP_EN" to state that the callback points to the correct trampoline (REGS has its own trampoline). When ftrace_enabled is set to zero, all ftrace locations are a nop, so they do not point to any trampoline. But the _EN flags are still set. This can cause the accounting to go wrong when ftrace_enabled is cleared and an ops that has a trampoline is registered or unregistered. For example, the following will cause ftrace to crash: # echo function_graph > /sys/kernel/debug/tracing/current_tracer # echo 0 > /proc/sys/kernel/ftrace_enabled # echo nop > /sys/kernel/debug/tracing/current_tracer # echo 1 > /proc/sys/kernel/ftrace_enabled # echo function_graph > /sys/kernel/debug/tracing/current_tracer As function_graph uses a trampoline, when ftrace_enabled is set to zero the updates to the record are not done. When enabling function_graph again, the record will still have the TRAMP_EN flag set, and it will look for an op that has a trampoline other than the function_graph ops, and fail to find one. Cc: stable@vger.kernel.org # 3.17+ Reported-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 09 March 2015, 14:46:00 UTC
4d08a36 James Morris 09 March 2015, 13:38:16 UTC Merge branch 'for-current' of https://github.com/PeterHuewe/linux-tpmdd into for-linus 09 March 2015, 13:38:16 UTC
05d6a08 Boris Brezillon 03 December 2014, 11:32:03 UTC ARM: at91/dt: at91sam9261: fix clocks and clock-names in udc definition Peripheral clock is named pclk and system clock is named hclk (those are the names expected by the at91_udc driver). Drop the deprecated usb_clk (formerly used to configure the usb clock rate which is now directly configurable through hclk). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> 09 March 2015, 11:28:09 UTC
f7214cf Marc Kleine-Budde 06 March 2015, 08:00:38 UTC MAINTAINERS: add Marc Kleine-Budde as co maintainer for CAN networking layer This patch adds Marc Kleine-Budde as a co maintainer for the CAN networking layer. Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 09 March 2015, 09:41:45 UTC
84b0d71 Marc Kleine-Budde 06 March 2015, 07:58:33 UTC MAINTAINERS: linux-can moved to github As gitorious will shut down at the end of May 2015, the linux-can website moved to github. This patch reflects this change. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 09 March 2015, 09:22:24 UTC
2fec510 Ahmed S. Darwish 26 February 2015, 15:22:02 UTC can: kvaser_usb: Read all messages in a bulk-in URB buffer The Kvaser firmware can only read and write messages that are not crossing the USB endpoint's wMaxPacketSize boundary. While receiving commands from the CAN device, if the next command in the same URB buffer crossed that max packet size boundary, the firmware puts a zero-length placeholder command in its place then moves the real command to the next boundary mark. The driver did not recognize such behavior, leading to missing a good number of rx events during a heavy rx load session. Moreover, a tx URB context only gets freed upon receiving its respective tx ACK event. Over time, the free tx URB contexts pool gets depleted due to the missing ACK events. Consequently, the netif transmission queue gets __permanently__ stopped; no frames could be sent again except after restarting the CAN newtwork interface. Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 09 March 2015, 09:22:24 UTC
deb2701 Ahmed S. Darwish 26 February 2015, 15:20:11 UTC can: kvaser_usb: Avoid double free on URB submission failures Upon a URB submission failure, the driver calls usb_free_urb() but then manually frees the URB buffer by itself. Meanwhile usb_free_urb() has alredy freed out that transfer buffer since we're the only code path holding a reference to this URB. Remove two of such invalid manual free(). Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 09 March 2015, 09:22:24 UTC
b0d4724 Stephane Grosjean 02 March 2015, 10:54:38 UTC can: peak_usb: fix missing ctrlmode_ init for every dev Fixes a missing initialization of ctrlmode and ctrlmode_supported fields, for all other CAN devices than the first one. This fix only concerns the PCAN-USB Pro FD dual-channels CAN-FD device made by PEAK-System. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 09 March 2015, 09:22:24 UTC
9694390 Oliver Hartkopp 23 February 2015, 19:37:54 UTC can: add missing initialisations in CAN related skbuffs When accessing CAN network interfaces with AF_PACKET sockets e.g. by dhclient this can lead to a skb_under_panic due to missing skb initialisations. Add the missing initialisations at the CAN skbuff creation times on driver level (rx path) and in the network layer (tx path). Reported-by: Austin Schuh <austin@peloton-tech.com> Reported-by: Daniel Steer <daniel.steer@mclaren.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> 09 March 2015, 09:22:24 UTC
a1f3f1c Takashi Iwai 08 March 2015, 17:29:50 UTC ALSA: hda - Fix regression of HD-audio controller fallback modes The commit [63e51fd708f5: ALSA: hda - Don't take unresponsive D3 transition too serious] introduced a conditional fallback behavior to the HD-audio controller depending on the flag set. However, it introduced a silly bug, too, that the flag was evaluated in a reverse way. This resulted in a regression of HD-audio controller driver where it can't go to the fallback mode at communication errors. Unfortunately (or fortunately?) this didn't come up until recently because the affected code path is an error handling that happens only on an unstable hardware chip. Most of recent chips work stably, thus they didn't hit this problem. Now, we've got a regression report with a VIA chip, and this seems indeed requiring the fallback to the polling mode, and finally the bug was revealed. The fix is a oneliner to remove the wrong logical NOT in the check. (Lesson learned - be careful about double negation.) The bug should be backported to stable, but the patch won't be applicable to 3.13 or earlier because of the code splits. The stable fix patches for earlier kernels will be posted later manually. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94021 Fixes: 63e51fd708f5 ('ALSA: hda - Don't take unresponsive D3 transition too serious') Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Takashi Iwai <tiwai@suse.de> 09 March 2015, 07:41:13 UTC
c247f05 Willem de Bruijn 08 March 2015, 01:33:22 UTC ip: fix error queue empty skb handling When reading from the error queue, msg_name and msg_control are only populated for some errors. A new exception for empty timestamp skbs added a false positive on icmp errors without payload. `traceroute -M udpconn` only displayed gateways that return payload with the icmp error: the embedded network headers are pulled before sock_queue_err_skb, leaving an skb with skb->len == 0 otherwise. Fix this regression by refining when msg_name and msg_control branches are taken. The solutions for the two fields are independent. msg_name only makes sense for errors that configure serr->port and serr->addr_offset. Test the first instead of skb->len. This also fixes another issue. saddr could hold the wrong data, as serr->addr_offset is not initialized in some code paths, pointing to the start of the network header. It is only valid when serr->port is set (non-zero). msg_control support differs between IPv4 and IPv6. IPv4 only honors requests for ICMP and timestamps with SOF_TIMESTAMPING_OPT_CMSG. The skb->len test can simply be removed, because skb->dev is also tested and never true for empty skbs. IPv6 honors requests for all errors aside from local errors and timestamps on empty skbs. In both cases, make the policy more explicit by moving this logic to a new function that decides whether to process msg_control and that optionally prepares the necessary fields in skb->cb[]. After this change, the IPv4 and IPv6 paths are more similar. The last case is rxrpc. Here, simply refine to only match timestamps. Fixes: 49ca0d8bfaf3 ("net-timestamp: no-payload option") Reported-by: Jan Niehusmann <jan@gondor.com> Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes v1->v2 - fix local origin test inversion in ip6_datagram_support_cmsg - make v4 and v6 code paths more similar by introducing analogous ipv4_datagram_support_cmsg - fix compile bug in rxrpc Signed-off-by: David S. Miller <davem@davemloft.net> 09 March 2015, 03:01:54 UTC
8edfe3b Peter Senna Tschudin 07 March 2015, 11:10:26 UTC bgmac: Clean warning messages On my test environment the throughput of a file transfer drops from 4.4MBps to 116KBps due the number of repeated warning messages. This patch removes the warning messages as DMA works correctly with addresses using 0xC0000000 bits. Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 March 2015, 02:55:48 UTC
9eccca0 Linus Torvalds 08 March 2015, 23:09:09 UTC Linux 4.0-rc3 08 March 2015, 23:09:09 UTC
1711fd9 Al Viro 07 March 2015, 21:08:46 UTC sunrpc: fix braino in ->poll() POLL_OUT isn't what callers of ->poll() are expecting to see; it's actually __SI_POLL | 2 and it's a siginfo code, not a poll bitmap bit... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Cc: Bruce Fields <bfields@fieldses.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 08 March 2015, 19:53:46 UTC
1163d50 Linus Torvalds 08 March 2015, 19:47:18 UTC Merge tag 'usb-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here's a round of USB fixes for 4.0-rc3. Nothing major, the usual gadget, xhci and usb-serial fixes and a few new device ids as well. All have been in linux-next successfully" * tag 'usb-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (36 commits) xhci: Workaround for PME stuck issues in Intel xhci xhci: fix reporting of 0-sized URBs in control endpoint usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boards USB: ch341: set tty baud speed according to tty struct USB: serial: cp210x: Adding Seletek device id's USB: pl2303: disable break on shutdown USB: mxuport: fix null deref when used as a console USB: serial: clean up bus probe error handling USB: serial: fix port attribute-creation race USB: serial: fix tty-device error handling at probe USB: serial: fix potential use-after-free after failed probe USB: console: add dummy __module_get USB: ftdi_sio: add PIDs for Actisense USB devices Revert "USB: serial: make bulk_out_size a lower limit" cdc-acm: Add support for Denso cradle CU-321 usb-storage: support for more than 8 LUNs uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS539 USB: usbfs: don't leak kernel data in siginfo xhci: Clear the host side toggle manually when endpoint is 'soft reset' xhci: Allocate correct amount of scratchpad buffers ... 08 March 2015, 19:47:18 UTC
bbbce51 Linus Torvalds 08 March 2015, 19:25:40 UTC Merge tag 'tty-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some tty and serial driver fixes for 4.0-rc3. Along with the atime fix that you know about, here are some other serial driver bugfixes as well. Most notable is a wait_until_sent bugfix that was traced back to being around since before 2.6.12 that Johan has fixed up. All have been in linux-next successfully" * tag 'tty-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: TTY: fix tty_wait_until_sent maximum timeout TTY: fix tty_wait_until_sent on 64-bit machines USB: serial: fix infinite wait_until_sent timeout TTY: bfin_jtag_comm: remove incorrect wait_until_sent operation net: irda: fix wait_until_sent poll timeout serial: uapi: Declare all userspace-visible io types serial: core: Fix iotype userspace breakage serial: sprd: Fix missing spin_unlock in sprd_handle_irq() console: Fix console name size mismatch tty: fix up atime/mtime mess, take four serial: 8250_dw: Fix get_mctrl behaviour serial:8250:8250_pci: delete unneeded quirk entries serial:8250:8250_pci: fix redundant entry report for WCH_CH352_2S Change email address for 8250_pci serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO" Revert "tty/serial: of_serial: add DT alias ID handling" 08 March 2015, 19:25:40 UTC
47df986 Linus Torvalds 08 March 2015, 19:20:10 UTC Merge tag 'staging-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some IIO and staging driver fixes for 4.0-rc3. Details are in the shortlog, nothing major, mostly IIO fixes for reported issues. All have been in linux-next successfully" * tag 'staging-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits) staging: comedi: adv_pci1710: fix AI INSN_READ for non-zero channel staging: comedi: vmk80xx: remove "firmware version" kernel messages staging: comedi: comedi_isadma: fix "stalled" detect in comedi_isadma_disable_on_sample() iio: ak8975: fix AK09911 dependencies iio: common: ssp_sensors: Protect PM-only functions to kill warning IIO: si7020: Allocate correct amount of memory in devm_iio_device_alloc Revert "iio:humidity:si7020: fix pointer to i2c client" iio: light: gp2ap020a00f: Select REGMAP_I2C iio: light: jsa1212: Select REGMAP_I2C iio: ad5686: fix optional reference voltage declaration iio:adc:mcp3422 Fix incorrect scales table iio: mxs-lradc: fix iio channel map regression iio: imu: adis16400: Fix sign extension staging: iio: ad2s1200: Fix sign extension iio: mxs-lradc: only update the buffer when its conversions have finished iio: mxs-lradc: make ADC reads not unschedule touchscreen conversions iio: mxs-lradc: make ADC reads not disable touchscreen interrupts iio: mxs-lradc: separate touchscreen and buffer virtual channels iio: imu: inv_mpu6050: Prevent dereferencing NULL iio: iadc: wait_for_completion_timeout time in jiffies ... 08 March 2015, 19:20:10 UTC
96b62a5 Alan Stern 04 March 2015, 15:31:50 UTC gadgetfs: really get rid of switching ->f_op ... for ep0 as well Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 08 March 2015, 19:19:03 UTC
29191c7 Linus Torvalds 08 March 2015, 19:15:47 UTC Merge tag 'char-misc-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are two char/misc fixes for 4.0-rc3. One is a reported binder driver fix needed due to a change in the mm core that happened in 4.0-rc1. Another is a mei driver fix that resolves a reported issue in that driver. Both have been in linux-next for a while" * tag 'char-misc-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: make device disabled on stop unconditionally android: binder: fix binder mmap failures 08 March 2015, 19:15:47 UTC
b0bc657 Linus Torvalds 08 March 2015, 18:51:04 UTC Merge tag 'cc-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull "code of conflict" from Greg KH: "This file tries to set the rational basis for our code reviews, gives some advice on how to conduct them, and provides an excalation channel for any kernel developers if they so desire it" [ Let's see how this works ] * tag 'cc-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Code of Conflict 08 March 2015, 18:51:04 UTC
d4461a6 Al Viro 03 March 2015, 08:39:34 UTC gadgetfs: get rid of flipping ->f_op in ep_config() Final methods start with get_ready_ep(), which will fail unless we have ->state == STATE_EP_ENABLED. So they'd be failing just fine until that first write() anyway. Let's do the following: * get_ready_ep() gets a new argument - true when called from ep_write_iter(), false otherwise. * make it quiet when it finds STATE_EP_READY (no printk, that is; the case won't be impossible after that change). * when that new argument is true, treat STATE_EP_READY the same way as STATE_EP_ENABLED (i.e. return zero and do not unlock). * in ep_write_iter(), after success of get_ready_ep() turn if (!usb_endpoint_dir_in(&epdata->desc)) { into if (epdata->state == STATE_EP_ENABLED && !usb_endpoint_dir_in(&epdata->desc)) { - that logics only applies after config. * have ep_config() take kernel-side buffer (i.e. use memcpy() instead of copy_from_user() in there) and in the "let's call ep_io or ep_aio" (again, in ep_write_iter()) add "... or ep_config() in case it's not configured yet" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 08 March 2015, 17:33:50 UTC
4559fbb Yun Wu 06 March 2015, 16:37:50 UTC irqchip: gicv3-its: Support safe initialization It's unsafe to change the configurations of an activated ITS directly since this will lead to unpredictable results. This patch guarantees the ITSes being initialized are quiescent. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Yun Wu <wuyun.wu@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1425659870-11832-12-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> 08 March 2015, 05:34:58 UTC
7cb9911 Yun Wu 06 March 2015, 16:37:49 UTC irqchip: gicv3-its: Define macros for GITS_CTLR fields Define macros for GITS_CTLR fields to avoid using magic numbers. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Yun Wu <wuyun.wu@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1425659870-11832-11-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> 08 March 2015, 05:34:35 UTC
1d27704 Yun Wu 06 March 2015, 16:37:48 UTC irqchip: gicv3-its: Add limitation to page order When required size of Device Table is out of the page allocator's capability, the whole ITS will fail in probing. This actually is not the hardware's problem and is mainly a limitation of the kernel page allocator. This patch will keep ITS going on to the next initializaion stage with an explicit warning. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Yun Wu <wuyun.wu@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1425659870-11832-10-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> 08 March 2015, 05:34:21 UTC
790b57a Yun Wu 06 March 2015, 16:37:47 UTC irqchip: gicv3-its: Use 64KB page as default granule The field of page size in register GITS_BASERn might be read-only if an implementation only supports a single, fixed page size. But currently the ITS driver will throw out an error when PAGE_SIZE is less than the minimum size supported by an ITS. So addressing this problem by using 64KB pages as default granule for all the ITS base tables. Acked-by: Marc Zyngier <marc.zyngier@arm.com> [maz: fixed bug breaking non Device Table allocations] Signed-off-by: Yun Wu <wuyun.wu@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1425659870-11832-9-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> 08 March 2015, 05:34:12 UTC
6c83412 Yun Wu 06 March 2015, 16:37:46 UTC irqchip: gicv3-its: Zero itt before handling to hardware Some kind of brain-dead implementations chooses to insert ITEes in rapid sequence of disabled ITEes, and an un-zeroed ITT will confuse ITS on judging whether an ITE is really enabled or not. Considering the implementations are still supported by the GICv3 architecture, in which ITT is not required to be zeroed before being handled to hardware, we do the favor in ITS driver. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Yun Wu <wuyun.wu@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1425659870-11832-8-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> 08 March 2015, 05:33:54 UTC
614be38 Vladimir Murzin 06 March 2015, 16:37:45 UTC irqchip: gic-v3: Fix out of bounds access to cpu_logical_map While playing with KASan support for arm64/arm the following appeared on boot: ================================================================== BUG: AddressSanitizer: out of bounds access in __asan_load8+0x14/0x1c at addr ffffffc000ad0dc0 Read of size 8 by task swapper/0/1 page:ffffffbdc202b400 count:1 mapcount:0 mapping: (null) index:0x0 flags: 0x400(reserved) page dumped because: kasan: bad access detected Address belongs to variable __cpu_logical_map+0x200/0x220 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc6-next-20150129+ #481 Hardware name: FVP Base (DT) Call trace: [<ffffffc00008a794>] dump_backtrace+0x0/0x184 [<ffffffc00008a928>] show_stack+0x10/0x1c [<ffffffc00075e46c>] dump_stack+0xa0/0xf8 [<ffffffc0001df490>] kasan_report_error+0x23c/0x264 [<ffffffc0001e0188>] check_memory_region+0xc0/0xe4 [<ffffffc0001dedf0>] __asan_load8+0x10/0x1c [<ffffffc000431294>] gic_raise_softirq+0xc4/0x1b4 [<ffffffc000091fc0>] smp_send_reschedule+0x30/0x3c [<ffffffc0000f0d1c>] try_to_wake_up+0x394/0x434 [<ffffffc0000f0de8>] wake_up_process+0x2c/0x6c [<ffffffc0000d9570>] wake_up_worker+0x38/0x48 [<ffffffc0000dbb50>] insert_work+0xac/0xec [<ffffffc0000dbd38>] __queue_work+0x1a8/0x374 [<ffffffc0000dbf60>] queue_work_on+0x5c/0x7c [<ffffffc0000d8a78>] call_usermodehelper_exec+0x170/0x188 [<ffffffc0004037b8>] kobject_uevent_env+0x650/0x6bc [<ffffffc000403830>] kobject_uevent+0xc/0x18 [<ffffffc00040292c>] kset_register+0xa8/0xc8 [<ffffffc0004d6c88>] bus_register+0x134/0x2e8 [<ffffffc0004d73b4>] subsys_virtual_register+0x2c/0x5c [<ffffffc000a76a4c>] wq_sysfs_init+0x14/0x20 [<ffffffc000082a28>] do_one_initcall+0xa8/0x1fc [<ffffffc000a70db4>] kernel_init_freeable+0x1ec/0x294 [<ffffffc00075aa5c>] kernel_init+0xc/0xec Memory state around the buggy address: ffffff80003e0820: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffff80003e0830: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffff80003e0840: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffff80003e0850: 00 00 fa fa fa fa fa fa 00 00 00 00 00 00 00 00 ================================================================== The reason for that cpumask_next() returns >= nr_cpu_ids if no further cpus set, but "==" condition is checked only, so we end up with out-of-bounds access to cpu_logical_map. Fix is by using the condition check for cpumask_next. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1425659870-11832-7-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> 08 March 2015, 05:33:29 UTC
cf61387 Marc Zyngier 06 March 2015, 16:37:44 UTC irqchip: gic: Fix unsafe locking reported by lockdep When compiled with CONFIG_LOCKDEP, the kernel shouts badly, saying that the locking in the GIC code is unsafe. I'm afraid the kernel is right: CPU0 ---- lock(irq_controller_lock); <Interrupt> lock(irq_controller_lock); *** DEADLOCK *** This can happen while enabling, disabling, setting the type or the affinity of an interrupt. The fix is to take the interrupt_controller_lock with interrupts disabled in these cases. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1425659870-11832-6-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> 08 March 2015, 05:33:06 UTC
3e39e8f Marc Zyngier 06 March 2015, 16:37:43 UTC irqchip: gicv3-its: Fix unsafe locking reported by lockdep When compiled with CONFIG_LOCKDEP, the kernel shouts badly, saying that my locking is unsafe. I'm afraid the kernel is right: CPU0 CPU1 ---- ---- lock(&its->lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(&its->lock); <Interrupt> lock(&irq_desc_lock_class); *** DEADLOCK *** The fix is to always take its->lock with interrupts disabled. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1425659870-11832-5-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> 08 March 2015, 05:33:00 UTC
e8137f4 Marc Zyngier 06 March 2015, 16:37:42 UTC irqchip: gicv3-its: Iterate over PCI aliases to generate ITS configuration The current PCI/MSI support in the GICv3 ITS doesn't really deal with systems where different PCI devices end-up using the same RequesterID (as it would be the case with non-transparent bridges, for example). It is likely that none of these devices would actually generate any interrupt, as the ITS is programmed with the device's own ID, and not that of the bridge. A solution to this is to iterate over the PCI hierarchy to discover what the device aliases too. We also use this to discover the upper bound of the number of MSIs that this sub-hierarchy can generate. With this in place, PCI aliases can be supported. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1425659870-11832-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> 08 March 2015, 05:32:54 UTC
f54b97e Marc Zyngier 06 March 2015, 16:37:41 UTC irqchip: gicv3-its: Allocate enough memory for the full range of DeviceID The ITS table allocator is only allocating a single page per table. This works fine for most things, but leads to silent lack of interrupt delivery if we end-up with a device that has an ID that is out of the range defined by a single page of memory. Even worse, depending on the page size, behaviour changes, which is not a very good experience. A solution is actually to allocate memory for the full range of ID that the ITS supports. A massive waste memory wise, but at least a safe bet. Tested on a Phytium SoC. Tested-by: Chen Baozi <chenbaozi@kylinos.com.cn> Acked-by: Chen Baozi <chenbaozi@kylinos.com.cn> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1425659870-11832-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> 08 March 2015, 05:32:52 UTC
16acae7 Vladimir Murzin 06 March 2015, 16:37:40 UTC irqchip: gicv3-its: Fix ITS CPU init We skip initialisation of ITS in case the device-tree has no corresponding description, but we are still accessing to ITS bits while setting CPU interface what leads to the kernel panic: ITS: No ITS available, not enabling LPIs CPU0: found redistributor 0 region 0:0x000000002f100000 Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ffffffc0007fb000 [00000000] *pgd=00000000fc407003, *pud=00000000fc407003, *pmd=00000000fc408003, *pte=006000002f000707 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.19.0-rc2+ #318 Hardware name: FVP Base (DT) task: ffffffc00077edb0 ti: ffffffc00076c000 task.ti: ffffffc00076c000 PC is at its_cpu_init+0x2c/0x320 LR is at gic_cpu_init+0x168/0x1bc It happens in gic_rdists_supports_plpis() because gic_rdists is NULL. The gic_rdists is set to non-NULL only when ITS node is presented in the device-tree. Fix this by moving the call to gic_rdists_supports_plpis() inside the !list_empty(&its_nodes) block, because it is that list that guards the validity of the rest of the information in this driver. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1425659870-11832-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> 08 March 2015, 05:32:46 UTC
5724be8 Maxime Ripard 03 March 2015, 10:27:23 UTC irqchip: armada-370-xp: Fix chained per-cpu interrupts On the Cortex-A9-based Armada SoCs, the MPIC is not the primary interrupt controller. Yet, it still has to handle some per-cpu interrupt. To do so, it is chained with the GIC using a per-cpu interrupt. However, the current code only call irq_set_chained_handler, which is called and enable that interrupt only on the boot CPU, which means that the parent per-CPU interrupt is never unmasked on the secondary CPUs, preventing the per-CPU interrupt to actually work as expected. This was not seen until now since the only MPIC PPI users were the Marvell timers that were not working, but not used either since the system use the ARM TWD by default, and the ethernet controllers, that are faking there interrupts as SPI, and don't really expect to have interrupts on the secondary cores anyway. Add a CPU notifier that will enable the PPI on the secondary cores when they are brought up. Cc: <stable@vger.kernel.org> # 3.15+ Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1425378443-28822-1-git-send-email-maxime.ripard@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> 08 March 2015, 03:58:55 UTC
4eb8d6e Mathias Gottschlag 07 March 2015, 21:38:52 UTC Input: psmouse - disable "palm detection" in the focaltech driver Apparently, the threshold for large contact area seems to be rather low on some devices, causing the touchpad to frequently freeze during normal usage. Because we do now know how we are supposed to use the value in question, this commit just drops the related code completely. Signed-off-by: Mathias Gottschlag <mgottschlag@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 07 March 2015, 21:40:21 UTC
4ec212f Mathias Gottschlag 07 March 2015, 21:32:10 UTC Input: psmouse - disable changing resolution/rate/scale for FocalTech These PS/2 commands make some touchpads stop responding, so this commit adds some dummy functions to replace the generic implementation. Because scale changes were not encapsulated in a method of struct psmouse yet, this commit adds a method set_scale to psmouse. Signed-off-by: Mathias Gottschlag <mgottschlag@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 07 March 2015, 21:40:21 UTC
679d83e Mathias Gottschlag 07 March 2015, 21:27:08 UTC Input: psmouse - ensure that focaltech reports consistent coordinates We don't know whether x_max or y_max really hold the maximum possible coordinates, and we don't know for sure whether we correctly interpret the coordinates sent by the touchpad, so we clamp the reported values to prevent confusion in userspace code. Signed-off-by: Mathias Gottschlag <mgottschlag@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 07 March 2015, 21:40:20 UTC
3e98452 Mathias Gottschlag 07 March 2015, 21:26:31 UTC Input: psmouse - remove hardcoded touchpad size from the focaltech driver The size has in most cases already been fetched from the touchpad, the hardcoded values should have been removed. Signed-off-by: Mathias Gottschlag <mgottschlag@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 07 March 2015, 21:40:20 UTC
2cf3afc Linus Torvalds 07 March 2015, 19:56:30 UTC Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A set of updates and bugfixes for the new designware-baytrail driver. And a documentation bugfix" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx: add required clocks property to binding i2c: designware-baytrail: baytrail_i2c_acquire() might sleep i2c: designware-baytrail: cross-check lock functions i2c: designware-baytrail: fix sparse warnings i2c: designware-baytrail: fix typo in error path i2c: designware-baytrail: describe magic numbers 07 March 2015, 19:56:30 UTC
374dab2 Linus Torvalds 07 March 2015, 19:52:03 UTC Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma Pull slave-dmaengine fixes from Vinod Koul: "This contains small fixes spread across the drivers" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: mmp_pdma: fix warning about slave caps dmaengine: qcom_bam_dma: fix wrong register offsets dmaengine: bam-dma: fix a warning about missing capabilities dmaengine: ioatdma: workaround for incorrect DMACAP register dmaengine: at_xdmac: fix for chan conf simplification dmaengine: dw: don't handle interrupt when dmaengine is not used dma: mmp-tdma: refine dma disable and dma-pos update dmaengine: shdma: Move DMA stop to (runtime) suspend callbacks dmaenegine: mmp-pdma: fix irq handler overwrite physical chan issue 07 March 2015, 19:52:03 UTC
9aae0df Linus Torvalds 07 March 2015, 19:31:17 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "arm64 and generic kernel/module.c (acked by Rusty) fixes for CONFIG_DEBUG_SET_MODULE_RONX" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: kernel/module.c: Update debug alignment after symtable generation arm64: Don't use is_module_addr in setting page attributes 07 March 2015, 19:31:17 UTC
6302ce4 James Bottomley 05 March 2015, 00:18:33 UTC libsas: Fix Kernel Crash in smp_execute_task This crash was reported: [ 366.947370] sd 3:0:1:0: [sdb] Spinning up disk.... [ 368.804046] BUG: unable to handle kernel NULL pointer dereference at (null) [ 368.804072] IP: [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b [ 368.804098] PGD 0 [ 368.804114] Oops: 0002 [#1] SMP [ 368.804143] CPU 1 [ 368.804151] Modules linked in: sg netconsole s3g(PO) uinput joydev hid_multitouch usbhid hid snd_hda_codec_via cpufreq_userspace cpufreq_powersave cpufreq_stats uhci_hcd cpufreq_conservative snd_hda_intel snd_hda_codec snd_hwdep snd_pcm sdhci_pci snd_page_alloc sdhci snd_timer snd psmouse evdev serio_raw pcspkr soundcore xhci_hcd shpchp s3g_drm(O) mvsas mmc_core ahci libahci drm i2c_core acpi_cpufreq mperf video processor button thermal_sys dm_dmirror exfat_fs exfat_core dm_zcache dm_mod padlock_aes aes_generic padlock_sha iscsi_target_mod target_core_mod configfs sswipe libsas libata scsi_transport_sas picdev via_cputemp hwmon_vid fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sd_mod crc_t10dif usb_storage scsi_mod ehci_hcd usbcore usb_common [ 368.804749] [ 368.804764] Pid: 392, comm: kworker/u:3 Tainted: P W O 3.4.87-logicube-ng.22 #1 To be filled by O.E.M. To be filled by O.E.M./EPIA-M920 [ 368.804802] RIP: 0010:[<ffffffff81358457>] [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b [ 368.804827] RSP: 0018:ffff880117001cc0 EFLAGS: 00010246 [ 368.804842] RAX: 0000000000000000 RBX: ffff8801185030d0 RCX: ffff88008edcb420 [ 368.804857] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8801185030d4 [ 368.804873] RBP: ffff8801181531c0 R08: 0000000000000020 R09: 00000000fffffffe [ 368.804885] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801185030d4 [ 368.804899] R13: 0000000000000002 R14: ffff880117001fd8 R15: ffff8801185030d8 [ 368.804916] FS: 0000000000000000(0000) GS:ffff88011fc80000(0000) knlGS:0000000000000000 [ 368.804931] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 368.804946] CR2: 0000000000000000 CR3: 000000000160b000 CR4: 00000000000006e0 [ 368.804962] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 368.804978] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 368.804995] Process kworker/u:3 (pid: 392, threadinfo ffff880117000000, task ffff8801181531c0) [ 368.805009] Stack: [ 368.805017] ffff8801185030d8 0000000000000000 ffffffff8161ddf0 ffffffff81056f7c [ 368.805062] 000000000000b503 ffff8801185030d0 ffff880118503000 0000000000000000 [ 368.805100] ffff8801185030d0 ffff8801188b8000 ffff88008edcb420 ffffffff813583ac [ 368.805135] Call Trace: [ 368.805153] [<ffffffff81056f7c>] ? up+0xb/0x33 [ 368.805168] [<ffffffff813583ac>] ? mutex_lock+0x16/0x25 [ 368.805194] [<ffffffffa018c414>] ? smp_execute_task+0x4e/0x222 [libsas] [ 368.805217] [<ffffffffa018ce1c>] ? sas_find_bcast_dev+0x3c/0x15d [libsas] [ 368.805240] [<ffffffffa018ce4f>] ? sas_find_bcast_dev+0x6f/0x15d [libsas] [ 368.805264] [<ffffffffa018e989>] ? sas_ex_revalidate_domain+0x37/0x2ec [libsas] [ 368.805280] [<ffffffff81355a2a>] ? printk+0x43/0x48 [ 368.805296] [<ffffffff81359a65>] ? _raw_spin_unlock_irqrestore+0xc/0xd [ 368.805318] [<ffffffffa018b767>] ? sas_revalidate_domain+0x85/0xb6 [libsas] [ 368.805336] [<ffffffff8104e5d9>] ? process_one_work+0x151/0x27c [ 368.805351] [<ffffffff8104f6cd>] ? worker_thread+0xbb/0x152 [ 368.805366] [<ffffffff8104f612>] ? manage_workers.isra.29+0x163/0x163 [ 368.805382] [<ffffffff81052c4e>] ? kthread+0x79/0x81 [ 368.805399] [<ffffffff8135fea4>] ? kernel_thread_helper+0x4/0x10 [ 368.805416] [<ffffffff81052bd5>] ? kthread_flush_work_fn+0x9/0x9 [ 368.805431] [<ffffffff8135fea0>] ? gs_change+0x13/0x13 [ 368.805442] Code: 83 7d 30 63 7e 04 f3 90 eb ab 4c 8d 63 04 4c 8d 7b 08 4c 89 e7 e8 fa 15 00 00 48 8b 43 10 4c 89 3c 24 48 89 63 10 48 89 44 24 08 <48> 89 20 83 c8 ff 48 89 6c 24 10 87 03 ff c8 74 35 4d 89 ee 41 [ 368.805851] RIP [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b [ 368.805877] RSP <ffff880117001cc0> [ 368.805886] CR2: 0000000000000000 [ 368.805899] ---[ end trace b720682065d8f4cc ]--- It's directly caused by 89d3cf6 [SCSI] libsas: add mutex for SMP task execution, but shows a deeper cause: expander functions expect to be able to cast to and treat domain devices as expanders. The correct fix is to only do expander discover when we know we've got an expander device to avoid wrongly casting a non-expander device. Reported-by: Praveen Murali <pmurali@logicube.com> Tested-by: Praveen Murali <pmurali@logicube.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com> 07 March 2015, 04:51:29 UTC
c37bc68 Johan Hovold 04 March 2015, 09:39:07 UTC TTY: fix tty_wait_until_sent maximum timeout Currently tty_wait_until_sent may take up to twice as long as the requested timeout while waiting for driver and hardware buffers to drain. Fix this by taking the remaining number of jiffies after waiting for driver buffers to drain into account so that the timeout actually becomes a maximum timeout as it is documented to be. Note that this specifically implies tighter timings when closing a port as a consequence of actually honouring the port closing-wait setting for drivers relying on tty_wait_until_sent_from_close (e.g. via tty_port_close_start). Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:44:15 UTC
79fbf4a Johan Hovold 04 March 2015, 09:39:06 UTC TTY: fix tty_wait_until_sent on 64-bit machines Fix overflow bug in tty_wait_until_sent on 64-bit machines, where an infinite timeout (0) would be passed to the underlying tty-driver's wait_until_sent-operation as a negative timeout (-1), causing it to return immediately. This manifests itself for example as tcdrain() returning immediately, drivers not honouring the drain flags when setting terminal attributes, or even dropped data on close as a requested infinite closing-wait timeout would be ignored. The first symptom was reported by Asier LLANO who noted that tcdrain() returned prematurely when using the ftdi_sio usb-serial driver. Fix this by passing 0 rather than MAX_SCHEDULE_TIMEOUT (LONG_MAX) to the underlying tty driver. Note that the serial-core wait_until_sent-implementation is not affected by this bug due to a lucky chance (comparison to an unsigned maximum timeout), and neither is the cyclades one that had an explicit check for negative timeouts, but all other tty drivers appear to be affected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> # v2.6.12 Reported-by: ZIV-Asier Llano Palacios <asier.llano@cgglobal.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:44:14 UTC
f528bf4 Johan Hovold 04 March 2015, 09:39:05 UTC USB: serial: fix infinite wait_until_sent timeout Make sure to handle an infinite timeout (0). Note that wait_until_sent is currently never called with a 0-timeout argument due to a bug in tty_wait_until_sent. Fixes: dcf010503966 ("USB: serial: add generic wait_until_sent implementation") Cc: stable <stable@vger.kernel.org> # v3.10 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:44:14 UTC
6b270fd Johan Hovold 04 March 2015, 09:39:04 UTC TTY: bfin_jtag_comm: remove incorrect wait_until_sent operation Remove incorrect and redundant wait_until_sent operation, which waits for the driver buffer rather than any hardware buffers to drain, something which is already taken care of by the tty layer (and chars_in_buffer). Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:44:14 UTC
2c3fbe3 Johan Hovold 04 March 2015, 09:39:03 UTC net: irda: fix wait_until_sent poll timeout In case an infinite timeout (0) is requested, the irda wait_until_sent implementation would use a zero poll timeout rather than the default 200ms. Note that wait_until_sent is currently never called with a 0-timeout argument due to a bug in tty_wait_until_sent. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> # v2.6.12 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:44:14 UTC
647f162 Peter Hurley 01 March 2015, 15:24:28 UTC serial: uapi: Declare all userspace-visible io types ioctl(TIOCGSERIAL|TIOCSSERIAL) report and can change the port->iotype. UART drivers use the UPIO_* definitions, but the uapi header defines parallel values and userspace uses these parallel values for ioctls; thus the userspace values are definitive. Define UPIO_* iotypes in terms of the uapi defines, SERIAL_IO_*; extend the uapi defines to include all values in use by the serial core. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:39:55 UTC
2bb7851 Peter Hurley 01 March 2015, 15:18:16 UTC serial: core: Fix iotype userspace breakage commit 3ffb1a8193bea ("serial: core: Add big-endian iotype") re-numbered userspace-dependent values; ioctl(TIOCSSERIAL) can assign the port iotype (which is expected to match the selected i/o accessors), so iotype values must not be changed. Cc: Kevin Cernekee <cernekee@gmail.com> Cc: <stable@vger.kernel.org> # 3.19+ Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Reviewed-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:39:55 UTC
c4e6dcf Axel Lin 16 February 2015, 14:39:04 UTC serial: sprd: Fix missing spin_unlock in sprd_handle_irq() Fix return from sprd_handle_irq() with spin_lock held. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:39:55 UTC
30a22c2 Peter Hurley 01 March 2015, 15:11:05 UTC console: Fix console name size mismatch commit 6ae9200f2cab7 ("enlarge console.name") increased the storage for the console name to 16 bytes, but not the corresponding struct console_cmdline::name storage. Console names longer than 8 bytes cause read beyond end-of-string and failure to match console; I'm not sure if there are other unexpected consequences. Cc: <stable@vger.kernel.org> # 2.6.22+ Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:39:55 UTC
f0bf0bd Jiri Slaby 27 February 2015, 17:40:31 UTC tty: fix up atime/mtime mess, take four This problem was taken care of three times already in * b0de59b5733d18b0d1974a060860a8b5c1b36a2e (TTY: do not update atime/mtime on read/write), * 37b7f3c76595e23257f61bd80b223de8658617ee (TTY: fix atime/mtime regression), and * b0b885657b6c8ef63a46bc9299b2a7715d19acde (tty: fix up atime/mtime mess, take three) But it still misses one point. As John Paul correctly points out, we do not care about setting date. If somebody ever changes wall time backwards (by mistake for example), tty timestamps are never updated until the original wall time passes. So check the absolute difference of times and if it large than "8 seconds or so", always update the time. That means we will update immediatelly when changing time. Ergo, CAP_SYS_TIME can foul the check, but it was always that way. Thanks John for serving me this so nicely debugged. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: John Paul Perry <john_paul.perry@alcatel-lucent.com> Cc: <stable@vger.kernel.org> # all, as b0b885657 was backported Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:06:51 UTC
dfd3766 Desmond Liu 27 February 2015, 00:35:57 UTC serial: 8250_dw: Fix get_mctrl behaviour Fixed behaviour of get_mctrl() serial driver function as documented in: https://www.kernel.org/doc/Documentation/serial/driver Added device-tree properties 'dcd-override', 'dsr-override', 'cts-override', and 'ri-override' specific to the Synopsis 8250 DesignWare UART driver. Allows one to force Data Carrier Detect, Clear To Send, and Data Set Ready signals to permanently be reported as active. The Ring indicator can be forced to be reported as inactive. It is possible that if modem control signalling is enabled on a port that doesn't have these pins (e.g. - a simple two wire Tx/Rx port), the driver can hang indefinitely waiting for the state to change. The new DT properties allow the driver to ignore the state of these pins on serial ports that don't support them, as recommended in the kernel documentation. Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com> Signed-off-by: Jonathan Richardson <jonathar@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:06:51 UTC
7cf9110 Wang YanQing 06 March 2015, 17:08:35 UTC serial:8250:8250_pci: delete unneeded quirk entries These quirk entries have the same effect as default quirk entry, so we can just delete them. Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:06:51 UTC
6262a36 Wang YanQing 06 March 2015, 17:13:03 UTC serial:8250:8250_pci: fix redundant entry report for WCH_CH352_2S Commit 8b5c913f7ee6464849570bacb6bcd9ef0eaf7dce ("serial: 8250_pci: Add WCH CH352 quirk to avoid Xscale detection") trigger one redundant entry report message. This patch fix it. Reported-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:06:51 UTC
f2e0ea8 Russell King 06 March 2015, 10:49:21 UTC Change email address for 8250_pci I'm still receiving reports to my email address, so let's point this at the linux-serial mailing list instead. Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:06:51 UTC
ca8bb4a Sebastian Andrzej Siewior 15 February 2015, 17:32:16 UTC serial: 8250: Revert "tty: serial: 8250_core: read only RX if there is something in the FIFO" This reverts commit 0aa525d11859c1a4d5b78fdc704148e2ae03ae13. The conditional RX-FIFO read seems to cause spurious interrupts and we see just: |serial8250: too much work for irq29 The previous behaviour was "default" for decades and Marvell's 88f6282 SoC might not be the only that relies on it. Therefore the Omap fix is reverted for now. Fixes: 0aa525d11859 ("tty: serial: 8250_core: read only RX if there is something in the FIFO") Reported-By: Nicolas Schichan <nschichan@freebox.fr> Debuged-By: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:06:51 UTC
045f32d Baruch Siach 16 February 2015, 06:27:49 UTC Revert "tty/serial: of_serial: add DT alias ID handling" This reverts commit 6d01bb9dc82a60580f749062a48cb47cd5caca07. The exact same code was added in commit 3239fd31d4 (serial: of-serial: fetch line number from DT) a few lined above. Doing this once should be enough. Cc: Rob Herring <robh@kernel.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 March 2015, 02:06:51 UTC
af13e86 Linus Torvalds 07 March 2015, 00:54:22 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Radeon, imx, msm, and i915 fixes. The msm, imx and i915 ones are fairly run of the mill. Radeon had some DP audio and posting reads for irq fixes, along with a fix for 32-bit kernels with new cards, we were using unsigned long to represent GPU side memory space, but since that changed size on 32 vs 64 cards with lots of VRAM failed, so the change has no effect on x86-64, just moves to using uint64_t instead" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (35 commits) drm/msm: kexec fixes drm/msm/mdp5: fix cursor blending drm/msm/mdp5: fix cursor ROI drm/msm/atomic: Don't leak atomic commit object when commit fails drm/msm/mdp5: Avoid flushing registers when CRTC is disabled drm/msm: update generated headers (add 6th lm.base entry) drm/msm/mdp5: fixup "drm/msm: fix fallout of atomic dpms changes" drm/ttm: device address space != CPU address space drm/mm: Support 4 GiB and larger ranges drm/i915: gen4: work around hang during hibernation drm/i915: Check for driver readyness before handling an underrun interrupt drm/radeon: fix interlaced modes on DCE8 drm/radeon: fix DRM_IOCTL_RADEON_CS oops drm/radeon: do a posting read in cik_set_irq drm/radeon: do a posting read in si_set_irq drm/radeon: do a posting read in evergreen_set_irq drm/radeon: do a posting read in r600_set_irq drm/radeon: do a posting read in rs600_set_irq drm/radeon: do a posting read in r100_set_irq radeon/audio: fix DP audio on DCE6 ... 07 March 2015, 00:54:22 UTC
5d23211 Matt Porter 03 March 2015, 16:57:08 UTC i2c: imx: add required clocks property to binding A clock specifier is required for i.MX I2C and is provided in all DTS implementations. Add this to the list of required properties in the binding. Signed-off-by: Matt Porter <mporter@konsulko.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 07 March 2015, 00:13:00 UTC
ebf2ef8 Andy Shevchenko 10 February 2015, 17:06:10 UTC i2c: designware-baytrail: baytrail_i2c_acquire() might sleep This patch marks baytrail_i2c_acquire() that it might sleep. Also it chages while-loop to do-while and, though it is matter of taste, gives a chance to check one more time before report a timeout. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 07 March 2015, 00:08:26 UTC
30be774 Andy Shevchenko 10 February 2015, 17:06:09 UTC i2c: designware-baytrail: cross-check lock functions It seems the idea behind the cross-check is to prevent acquire semaphore when there is no release callback and vice versa. Thus, patch fixes a typo. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 07 March 2015, 00:08:06 UTC
c8e043e Andy Shevchenko 10 February 2015, 17:06:08 UTC i2c: designware-baytrail: fix sparse warnings There is no need to export functions that are used as the callbacks in the struct dw_i2c_dev. Otherwise we get the following warnings: drivers/i2c/busses/i2c-designware-baytrail.c:63:5: warning: symbol 'baytrail_i2c_acquire' was not declared. Should it be static? drivers/i2c/busses/i2c-designware-baytrail.c:114:6: warning: symbol 'baytrail_i2c_release' was not declared. Should it be static? While here, do few indentation fixes, remove i2c_dw_eval_lock_support() from functions exported to the modules and redundant assignment of local sem variable. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 07 March 2015, 00:07:46 UTC
259aada Andy Shevchenko 10 February 2015, 17:06:07 UTC i2c: designware-baytrail: fix typo in error path It seems we have same message for different return values in get_sem() and baytrail_i2c_acquire(). I suspect this is just a typo, so this patch fixes it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 07 March 2015, 00:07:27 UTC
9b5c9f0 Andy Shevchenko 10 February 2015, 17:06:06 UTC i2c: designware-baytrail: describe magic numbers The patch converts hardcoded numerical constants to a named ones. While here, align the variable name in get_sem() and reset_semaphore(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 07 March 2015, 00:07:07 UTC
84399bb Linus Torvalds 06 March 2015, 21:52:54 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Outside of misc fixes, Filipe has a few fsync corners and we're pulling in one more of Josef's fixes from production use here" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs:__add_inode_ref: out of bounds memory read when looking for extended ref. Btrfs: fix data loss in the fast fsync path Btrfs: remove extra run_delayed_refs in update_cowonly_root Btrfs: incremental send, don't rename a directory too soon btrfs: fix lost return value due to variable shadowing Btrfs: do not ignore errors from btrfs_lookup_xattr in do_setxattr Btrfs: fix off-by-one logic error in btrfs_realloc_node Btrfs: add missing inode update when punching hole Btrfs: abort the transaction if we fail to update the free space cache inode Btrfs: fix fsync race leading to ordered extent memory leaks 06 March 2015, 21:52:54 UTC
0d9b9c1 Linus Torvalds 06 March 2015, 21:47:56 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching fix from Jiri Kosina: "Fix an RCU unlock misplacement in live patching infrastructure, from Peter Zijlstra" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: fix RCU usage in klp_find_external_symbol() 06 March 2015, 21:47:56 UTC
5b3b592 Linus Torvalds 06 March 2015, 21:43:33 UTC Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal management fixes from Eduardo Valentin: "Specifics: - adding Lukasz as maintainer of samsung thermal driver. - driver fixes: exynos and int430x. - one fix in the exynos cpufreq driver related to cpu cooling (acked by cpufreq maintainer). - fix default sysfs attributes of cooling devices Note: I am sending this pull on Rui's behalf while he fixes issues in his Linux box" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: Make sysfs attributes of cooling devices default attributes Thermal/int340x: Fix memleak for aux trip MAINTAINERS: Add entry for SAMSUNG THERMAL DRIVER cpufreq: exynos: Use simple approach to asses if cpu cooling can be used thermal: exynos: Fix wrong control of power down detection mode for Exynos7 06 March 2015, 21:43:33 UTC
f6bec6e Dave Airlie 06 March 2015, 21:40:17 UTC Merge tag 'drm-intel-fixes-2015-03-05' of git://anongit.freedesktop.org/drm-intel into drm-fixes two fixes, both cc'd stable. * tag 'drm-intel-fixes-2015-03-05' of git://anongit.freedesktop.org/drm-intel: drm/i915: gen4: work around hang during hibernation drm/i915: Check for driver readyness before handling an underrun interrupt 06 March 2015, 21:40:17 UTC
b0b20ce Dave Airlie 06 March 2015, 21:39:37 UTC Merge tag 'v4.0-rc2' into drm-fixes Linux 4.0-rc2 Merging this manually as the i915 change is in it, and intel fixes are on top of this 06 March 2015, 21:39:37 UTC
19913b6 Jarkko Sakkinen 01 March 2015, 21:55:47 UTC tpm: fix call order in tpm-chip.c - tpm_dev_add_device(): cdev_add() must be done before uevent is propagated in order to avoid races. - tpm_chip_register(): tpm_dev_add_device() must be done as the last step before exposing device to the user space in order to avoid races. In addition clarified description in tpm_chip_register(). Fixes: 313d21eeab92 ("tpm: device class for tpm") Fixes: afb5abc262e9 ("tpm: two-phase chip management functions") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Peter Huewe <peterhuewe@gmx.de> 06 March 2015, 21:35:49 UTC
62dfd91 jmlatten@linux.vnet.ibm.com 21 February 2015, 00:11:24 UTC tpm/ibmvtpm: Additional LE support for tpm_ibmvtpm_send Problem: When IMA and VTPM are both enabled in kernel config, kernel hangs during bootup on LE OS. Why?: IMA calls tpm_pcr_read() which results in tpm_ibmvtpm_send and tpm_ibmtpm_recv getting called. A trace showed that tpm_ibmtpm_recv was hanging. Resolution: tpm_ibmtpm_recv was hanging because tpm_ibmvtpm_send was sending CRQ message that probably did not make much sense to phype because of Endianness. The fix below sends correctly converted CRQ for LE. This was not caught before because it seems IMA is not enabled by default in kernel config and IMA exercises this particular code path in vtpm. Tested with IMA and VTPM enabled in kernel config and VTPM enabled on both a BE OS and a LE OS ppc64 lpar. This exercised CRQ and TPM command code paths in vtpm. Patch is against Peter's tpmdd tree on github which included Vicky's previous vtpm le patches. Signed-off-by: Joy Latten <jmlatten@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> # eb71f8a5e33f: "Added Little Endian support to vtpm module" Cc: <stable@vger.kernel.org> Reviewed-by: Ashley Lai <ashley@ahsleylai.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de> 06 March 2015, 21:35:48 UTC
back to top