Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
31f4f5b Linus Torvalds 11 November 2019, 00:17:15 UTC Linux 5.4-rc7 11 November 2019, 00:17:15 UTC
4486695 Linus Torvalds 10 November 2019, 21:41:59 UTC Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A set of fixes that have trickled in over the last couple of weeks: - MAINTAINER update for Cavium/Marvell ThunderX2 - stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for CAN interfaces - i.MX fixes for voltage regulator GPIO mappings, fixes voltage scaling issues - More i.MX fixes for various issues on i.MX eval boards: interrupt storm due to u-boot leaving pins in new states, fixing power button config, a couple of compatible-string corrections. - Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets - A few documentation tweaks and a fix of a memory leak in the reset subsystem" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: update Cavium ThunderX2 maintainers ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 arm64: dts: zii-ultra: fix ARM regulator GPIO handle ARM: sunxi: Fix CPU powerdown on A83T ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend arm64: dts: imx8mn: fix compatible string for sdma arm64: dts: imx8mm: fix compatible string for sdma reset: fix reset_control_ops kerneldoc comment ARM: dts: imx6-logicpd: Re-enable SNVS power key soc: imx: gpc: fix initialiser format ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts arm64: dts: ls1028a: fix a compatible issue reset: fix reset_control_get_exclusive kerneldoc comment reset: fix reset_control_lookup kerneldoc comment reset: fix of_reset_control_get_count kerneldoc comment reset: fix of_reset_simple_xlate kerneldoc comment reset: Fix memory leak in reset_control_array_put() 10 November 2019, 21:41:59 UTC
dd89262 Linus Torvalds 10 November 2019, 21:29:12 UTC Merge tag 'staging-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull IIO fixes and staging driver from Greg KH: "Here is a mix of a number of IIO driver fixes for 5.4-rc7, and a whole new staging driver. The IIO fixes resolve some reported issues, all are tiny. The staging driver addition is the vboxsf filesystem, which is the VirtualBox guest shared folder code. Hans has been trying to get filesystem reviewers to review the code for many months now, and Christoph finally said to just merge it in staging now as it is stand-alone and the filesystem people can review it easier over time that way. I know it's late for this big of an addition, but it is stand-alone. The code has been in linux-next for a while, long enough to pick up a few tiny fixes for it already so people are looking at it. All of these have been in linux-next with no reported issues" * tag 'staging-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: Fix error return code in vboxsf_fill_super() staging: vboxsf: fix dereference of pointer dentry before it is null checked staging: vboxsf: Remove unused including <linux/version.h> staging: Add VirtualBox guest shared folder (vboxsf) support iio: adc: stm32-adc: fix stopping dma iio: imu: inv_mpu6050: fix no data on MPU6050 iio: srf04: fix wrong limitation in distance measuring iio: imu: adis16480: make sure provided frequency is positive 10 November 2019, 21:29:12 UTC
3de2a3e Linus Torvalds 10 November 2019, 21:14:48 UTC Merge tag 'char-misc-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a number of late-arrival driver fixes for issues reported for some char/misc drivers for 5.4-rc7 These all come from the different subsystem/driver maintainers as things that they had reports for and wanted to see fixed. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: intel_th: pci: Add Jasper Lake PCH support intel_th: pci: Add Comet Lake PCH support intel_th: msu: Fix possible memory leak in mode_store() intel_th: msu: Fix overflow in shift of an unsigned int intel_th: msu: Fix missing allocation failure check on a kstrndup intel_th: msu: Fix an uninitialized mutex intel_th: gth: Fix the window switching sequence soundwire: slave: fix scanf format soundwire: intel: fix intel_register_dai PDI offsets and numbers interconnect: Add locking in icc_set_tag() interconnect: qcom: Fix icc_onecell_data allocation soundwire: depend on ACPI || OF soundwire: depend on ACPI thunderbolt: Drop unnecessary read when writing LC command in Ice Lake thunderbolt: Fix lockdep circular locking depedency warning thunderbolt: Read DP IN adapter first two dwords in one go 10 November 2019, 21:14:48 UTC
a5871fc Linus Torvalds 10 November 2019, 20:59:34 UTC Merge tag 'configfs-for-5.4-2' of git://git.infradead.org/users/hch/configfs Pull configfs regression fix from Christoph Hellwig: "Fix a regression from this merge window in the configfs symlink handling (Honggang Li)" * tag 'configfs-for-5.4-2' of git://git.infradead.org/users/hch/configfs: configfs: calculate the depth of parent item 10 November 2019, 20:59:34 UTC
9805a68 Linus Torvalds 10 November 2019, 20:07:47 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A small set of fixes for x86: - Make the tsc=reliable/nowatchdog command line parameter work again. It was broken with the introduction of the early TSC clocksource. - Prevent the evaluation of exception stacks before they are set up. This causes a crash in dumpstack because the stack walk termination gets screwed up. - Prevent a NULL pointer dereference in the rescource control file system. - Avoid bogus warnings about APIC id mismatch related to the LDR which can happen when the LDR is not in use and therefore not initialized. Only evaluate that when the APIC is in logical destination mode" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Respect tsc command line paraemeter for clocksource_tsc_early x86/dumpstack/64: Don't evaluate exception stacks before setup x86/apic/32: Avoid bogus LDR warnings x86/resctrl: Prevent NULL pointer dereference when reading mondata 10 November 2019, 20:07:47 UTC
621084c Linus Torvalds 10 November 2019, 20:03:58 UTC Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A small set of fixes for timekeepoing and clocksource drivers: - VDSO data was updated conditional on the availability of a VDSO capable clocksource. This causes the VDSO functions which do not depend on a VDSO capable clocksource to operate on stale data. Always update unconditionally. - Prevent a double free in the mediatek driver - Use the proper helper in the sh_mtu2 driver so it won't attempt to initialize non-existing interrupts" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping/vsyscall: Update VDSO data unconditionally clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name() clocksource/drivers/mediatek: Fix error handling 10 November 2019, 20:03:58 UTC
81388c2 Linus Torvalds 10 November 2019, 20:00:47 UTC Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Two fixes for scheduler regressions: - Plug a subtle race condition which was introduced with the rework of the next task selection functionality. The change of task properties became unprotected which can be observed inconsistently causing state corruption. - A trivial compile fix for CONFIG_CGROUPS=n" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix pick_next_task() vs 'change' pattern race sched/core: Fix compilation error when cgroup not selected 10 November 2019, 20:00:47 UTC
b584a17 Linus Torvalds 10 November 2019, 19:55:53 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Thomas Gleixner: - Fix the time sorting algorithm which was broken due to truncation of big numbers - Fix the python script generator fail caused by a broken tracepoint array iterator * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Fix time sorting perf tools: Remove unused trace_find_next_event() perf scripting engines: Iterate on tep event arrays directly 10 November 2019, 19:55:53 UTC
ffba65e Linus Torvalds 10 November 2019, 19:51:11 UTC Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixlet from Thomas Gleixner: "A trivial fix for a kernel doc regression where an argument change was not reflected in the documentation" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irq/irqdomain: Update __irq_domain_alloc_fwnode() function documentation 10 November 2019, 19:51:11 UTC
20c7e29 Linus Torvalds 10 November 2019, 19:47:39 UTC Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull stacktrace fix from Thomas Gleixner: "A small fix for a stacktrace regression. Saving a stacktrace for a foreign task skipped an extra entry which makes e.g. the output of /proc/$PID/stack incomplete" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: stacktrace: Don't skip first entry on noncurrent tasks 10 November 2019, 19:47:39 UTC
79a6406 Linus Torvalds 10 November 2019, 19:43:18 UTC Merge tag '5.4-rc7-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fix from Steve French: "Small fix for an smb3 reconnect bug (also marked for stable)" * tag '5.4-rc7-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6: SMB3: Fix persistent handles reconnect 10 November 2019, 19:43:18 UTC
820b7c7 Corentin Labbe 10 November 2019, 16:27:54 UTC lib: Remove select of inexistant GENERIC_IO config option GENERIC_IO was removed but still selected by lib/kconfig This patch finish the cleaning. Fixes: 9de8da47742b ("kconfig: kill off GENERIC_IO option") Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 10 November 2019, 18:38:43 UTC
4763c08 Linus Torvalds 10 November 2019, 00:47:34 UTC Merge tag 'pinctrl-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Fix glitch risks in the Intel GPIO - Fix the Intel Cherryview valid irq mask calculation. - Allocate the Intel Cherryview irqchip dynamically. - Fix the valid mask init sequency on the ST STMFX driver. * tag 'pinctrl-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: stmfx: fix valid_mask init sequence pinctrl: cherryview: Allocate IRQ chip dynamic pinctrl: cherryview: Fix irq_valid_mask calculation pinctrl: intel: Avoid potential glitches if pin is in GPIO mode 10 November 2019, 00:47:34 UTC
00aff68 Linus Torvalds 09 November 2019, 16:51:37 UTC Merge tag 'for-5.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few regressions and fixes for stable. Regressions: - fix a race leading to metadata space leak after task received a signal - un-deprecate 2 ioctls, marked as deprecated by mistake Fixes: - fix limit check for number of devices during chunk allocation - fix a race due to double evaluation of i_size_read inside max() macro, can cause a crash - remove wrong device id check in tree-checker" * tag 'for-5.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: un-deprecate ioctls START_SYNC and WAIT_SYNC btrfs: save i_size to avoid double evaluation of i_size_read in compress_file_range Btrfs: fix race leading to metadata space leak after task received signal btrfs: tree-checker: Fix wrong check on max devid btrfs: Consider system chunk array size for new SYSTEM chunks 09 November 2019, 16:51:37 UTC
4aba1a7 Linus Torvalds 09 November 2019, 16:47:03 UTC Merge tag 'linux-watchdog-5.4-rc7' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog fixes from Wim Van Sebroeck: - cpwd: fix build regression - pm8916_wdt: fix pretimeout registration flow - meson: Fix the wrong value of left time - imx_sc_wdt: Pretimeout should follow SCU firmware format - bd70528: Add MODULE_ALIAS to allow module auto loading * tag 'linux-watchdog-5.4-rc7' of git://www.linux-watchdog.org/linux-watchdog: watchdog: bd70528: Add MODULE_ALIAS to allow module auto loading watchdog: imx_sc_wdt: Pretimeout should follow SCU firmware format watchdog: meson: Fix the wrong value of left time watchdog: pm8916_wdt: fix pretimeout registration flow watchdog: cpwd: fix build regression 09 November 2019, 16:47:03 UTC
0058b0a Linus Torvalds 09 November 2019, 02:21:05 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from David Miller: 1) BPF sample build fixes from Björn Töpel 2) Fix powerpc bpf tail call implementation, from Eric Dumazet. 3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet. 4) Fix crash in ebtables when using dnat target, from Florian Westphal. 5) Fix port disable handling whne removing bcm_sf2 driver, from Florian Fainelli. 6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski. 7) Various KCSAN fixes all over the networking, from Eric Dumazet. 8) Memory leaks in mlx5 driver, from Alex Vesker. 9) SMC interface refcounting fix, from Ursula Braun. 10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu. 11) Add a TX lock to synchonize the kTLS TX path properly with crypto operations. From Jakub Kicinski. 12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano Garzarella. 13) Infinite loop in Intel ice driver, from Colin Ian King. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits) ixgbe: need_wakeup flag might not be set for Tx i40e: need_wakeup flag might not be set for Tx igb/igc: use ktime accessors for skb->tstamp i40e: Fix for ethtool -m issue on X722 NIC iavf: initialize ITRN registers with correct values ice: fix potential infinite loop because loop counter being too small qede: fix NULL pointer deref in __qede_remove() net: fix data-race in neigh_event_send() vsock/virtio: fix sock refcnt holding during the shutdown net: ethernet: octeon_mgmt: Account for second possible VLAN header mac80211: fix station inactive_time shortly after boot net/fq_impl: Switch to kvmalloc() for memory allocation mac80211: fix ieee80211_txq_setup_flows() failure path ipv4: Fix table id reference in fib_sync_down_addr ipv6: fixes rt6_probe() and fib6_nh->last_probe init net: hns: Fix the stray netpoll locks causing deadlock in NAPI path net: usb: qmi_wwan: add support for DW5821e with eSIM support CDC-NCM: handle incomplete transfer of MTU nfc: netlink: fix double device reference drop NFC: st21nfca: fix double free ... 09 November 2019, 02:21:05 UTC
5cb8418 Linus Torvalds 09 November 2019, 02:15:55 UTC Merge tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - Two NVMe device removal crash fixes, and a compat fixup for for an ioctl that was introduced in this release (Anton, Charles, Max - via Keith) - Missing error path mutex unlock for drbd (Dan) - cgroup writeback fixup on dead memcg (Tejun) - blkcg online stats print fix (Tejun) * tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block: cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead block: drbd: remove a stray unlock in __drbd_send_protocol() blkcg: make blkcg_print_stat() print stats only for online blkgs nvme: change nvme_passthru_cmd64 to explicitly mark rsvd nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths nvme-rdma: fix a segmentation fault during module unload 09 November 2019, 02:15:55 UTC
a2582cd David S. Miller 09 November 2019, 00:50:14 UTC Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Fixes 2019-11-08 This series contains fixes to igb, igc, ixgbe, i40e, iavf and ice drivers. Colin Ian King fixes a potentially wrap-around counter in a for-loop. Nick fixes the default ITR values for the iavf driver to 50 usecs interval. Arkadiusz fixes 'ethtool -m' for X722 devices where the correct value cannot be obtained from the firmware, so add X722 to the check to ensure the wrong value is not returned. Jake fixes igb and igc drivers in their implementation of launch time support by declaring skb->tstamp value as ktime_t instead of s64. Magnus fixes ixgbe and i40e where the need_wakeup flag for transmit may not be set for AF_XDP sockets that are only used to send packets. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2019, 00:50:14 UTC
0843aa8 Magnus Karlsson 08 November 2019, 19:58:10 UTC ixgbe: need_wakeup flag might not be set for Tx The need_wakeup flag for Tx might not be set for AF_XDP sockets that are only used to send packets. This happens if there is at least one outstanding packet that has not been completed by the hardware and we get that corresponding completion (which will not generate an interrupt since interrupts are disabled in the napi poll loop) between the time we stopped processing the Tx completions and interrupts are enabled again. In this case, the need_wakeup flag will have been cleared at the end of the Tx completion processing as we believe we will get an interrupt from the outstanding completion at a later point in time. But if this completion interrupt occurs before interrupts are enable, we lose it and should at that point really have set the need_wakeup flag since there are no more outstanding completions that can generate an interrupt to continue the processing. When this happens, user space will see a Tx queue need_wakeup of 0 and skip issuing a syscall, which means will never get into the Tx processing again and we have a deadlock. This patch introduces a quick fix for this issue by just setting the need_wakeup flag for Tx to 1 all the time. I am working on a proper fix for this that will toggle the flag appropriately, but it is more challenging than I anticipated and I am afraid that this patch will not be completed before the merge window closes, therefore this easier fix for now. This fix has a negative performance impact in the range of 0% to 4%. Towards the higher end of the scale if you have driver and application on the same core and issue a lot of packets, and towards no negative impact if you use two cores, lower transmission speeds and/or a workload that also receives packets. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 09 November 2019, 00:28:38 UTC
7056395 Magnus Karlsson 08 November 2019, 19:58:09 UTC i40e: need_wakeup flag might not be set for Tx The need_wakeup flag for Tx might not be set for AF_XDP sockets that are only used to send packets. This happens if there is at least one outstanding packet that has not been completed by the hardware and we get that corresponding completion (which will not generate an interrupt since interrupts are disabled in the napi poll loop) between the time we stopped processing the Tx completions and interrupts are enabled again. In this case, the need_wakeup flag will have been cleared at the end of the Tx completion processing as we believe we will get an interrupt from the outstanding completion at a later point in time. But if this completion interrupt occurs before interrupts are enable, we lose it and should at that point really have set the need_wakeup flag since there are no more outstanding completions that can generate an interrupt to continue the processing. When this happens, user space will see a Tx queue need_wakeup of 0 and skip issuing a syscall, which means will never get into the Tx processing again and we have a deadlock. This patch introduces a quick fix for this issue by just setting the need_wakeup flag for Tx to 1 all the time. I am working on a proper fix for this that will toggle the flag appropriately, but it is more challenging than I anticipated and I am afraid that this patch will not be completed before the merge window closes, therefore this easier fix for now. This fix has a negative performance impact in the range of 0% to 4%. Towards the higher end of the scale if you have driver and application on the same core and issue a lot of packets, and towards no negative impact if you use two cores, lower transmission speeds and/or a workload that also receives packets. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 09 November 2019, 00:11:48 UTC
6acab13 Jacob Keller 06 November 2019, 17:18:23 UTC igb/igc: use ktime accessors for skb->tstamp When implementing launch time support in the igb and igc drivers, the skb->tstamp value is assumed to be a s64, but it's declared as a ktime_t value. Although ktime_t is typedef'd to s64 it wasn't always, and the kernel provides accessors for ktime_t values. Use the ktime_to_timespec64 and ktime_set accessors instead of directly assuming that the variable is always an s64. This improves portability if the code is ever moved to another kernel version, or if the definition of ktime_t ever changes again in the future. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 09 November 2019, 00:10:51 UTC
4c9da6f Arkadiusz Kubalewski 06 November 2019, 14:24:04 UTC i40e: Fix for ethtool -m issue on X722 NIC This patch contains fix for a problem with command: 'ethtool -m <dev>' which breaks functionality of: 'ethtool <dev>' when called on X722 NIC Disallowed update of link phy_types on X722 NIC Currently correct value cannot be obtained from FW Previously wrong value returned by FW was used and was a root cause for incorrect output of 'ethtool <dev>' command Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 09 November 2019, 00:10:51 UTC
4eda4e0 Nicholas Nunley 05 November 2019, 12:22:14 UTC iavf: initialize ITRN registers with correct values Since commit 92418fb14750 ("i40e/i40evf: Use usec value instead of reg value for ITR defines") the driver tracks the interrupt throttling intervals in single usec units, although the actual ITRN registers are programmed in 2 usec units. Most register programming flows in the driver correctly handle the conversion, although it is currently not applied when the registers are initialized to their default values. Most of the time this doesn't present a problem since the default values are usually immediately overwritten through the standard adaptive throttling mechanism, or updated manually by the user, but if adaptive throttling is disabled and the interval values are left alone then the incorrect value will persist. Since the intended default interval of 50 usecs (vs. 100 usecs as programmed) performs better for most traffic workloads, this can lead to performance regressions. This patch adds the correct conversion when writing the initial values to the ITRN registers. Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 09 November 2019, 00:10:51 UTC
615457a Colin Ian King 01 November 2019, 14:00:17 UTC ice: fix potential infinite loop because loop counter being too small Currently the for-loop counter i is a u8 however it is being checked against a maximum value hw->num_tx_sched_layers which is a u16. Hence there is a potential wrap-around of counter i back to zero if hw->num_tx_sched_layers is greater than 255. Fix this by making i a u16. Addresses-Coverity: ("Infinite loop") Fixes: b36c598c999c ("ice: Updates to Tx scheduler code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 09 November 2019, 00:10:51 UTC
deabc87 Manish Chopra 08 November 2019, 10:42:30 UTC qede: fix NULL pointer deref in __qede_remove() While rebooting the system with SR-IOV vfs enabled leads to below crash due to recurrence of __qede_remove() on the VF devices (first from .shutdown() flow of the VF itself and another from PF's .shutdown() flow executing pci_disable_sriov()) This patch adds a safeguard in __qede_remove() flow to fix this, so that driver doesn't attempt to remove "already removed" devices. [ 194.360134] BUG: unable to handle kernel NULL pointer dereference at 00000000000008dc [ 194.360227] IP: [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.360304] PGD 0 [ 194.360325] Oops: 0000 [#1] SMP [ 194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200 [ 194.361044] qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables] [ 194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1 [ 194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019 [ 194.361412] task: ffff9cea9b360000 ti: ffff9ceabebdc000 task.ti: ffff9ceabebdc000 [ 194.361463] RIP: 0010:[<ffffffffc03553c4>] [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.361534] RSP: 0018:ffff9ceabebdfac0 EFLAGS: 00010282 [ 194.361570] RAX: 0000000000000000 RBX: ffff9cd013846098 RCX: 0000000000000000 [ 194.361621] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9cd013846098 [ 194.361668] RBP: ffff9ceabebdfae8 R08: 0000000000000000 R09: 0000000000000000 [ 194.361715] R10: 00000000bfe14201 R11: ffff9ceabfe141e0 R12: 0000000000000000 [ 194.361762] R13: ffff9cd013846098 R14: 0000000000000000 R15: ffff9ceab5e48000 [ 194.361810] FS: 00007f799c02d880(0000) GS:ffff9ceacb0c0000(0000) knlGS:0000000000000000 [ 194.361865] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 194.361903] CR2: 00000000000008dc CR3: 0000001bdac76000 CR4: 00000000007607e0 [ 194.361953] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 194.362002] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 194.362051] PKRU: 55555554 [ 194.362073] Call Trace: [ 194.362109] [<ffffffffc0355500>] qede_remove+0x10/0x20 [qede] [ 194.362180] [<ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0 [ 194.362240] [<ffffffffb98b3c52>] __device_release_driver+0x82/0xf0 [ 194.362285] [<ffffffffb98b3ce3>] device_release_driver+0x23/0x30 [ 194.362343] [<ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0 [ 194.362388] [<ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20 [ 194.362450] [<ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160 [ 194.362496] [<ffffffffb97f1aec>] sriov_disable+0x3c/0xf0 [ 194.362534] [<ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30 [ 194.362599] [<ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed] [ 194.362658] [<ffffffffb9622df6>] ? kfree+0x106/0x140 [ 194.362709] [<ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed] [ 194.362754] [<ffffffffb9622df6>] ? kfree+0x106/0x140 [ 194.362803] [<ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed] [ 194.362854] [<ffffffffc035544e>] __qede_remove+0xae/0x130 [qede] [ 194.362904] [<ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede] [ 194.362956] [<ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60 [ 194.363010] [<ffffffffb98b180b>] device_shutdown+0xfb/0x1f0 [ 194.363066] [<ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40 [ 194.363107] [<ffffffffb94b66e2>] kernel_restart+0x12/0x60 [ 194.363146] [<ffffffffb94b6959>] SYSC_reboot+0x229/0x260 [ 194.363196] [<ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0 [ 194.363253] [<ffffffffb942b621>] ? __switch_to+0x151/0x580 [ 194.363304] [<ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0 [ 194.363343] [<ffffffffb94b69fe>] SyS_reboot+0xe/0x10 [ 194.363387] [<ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a [ 194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0 [ 194.363712] RIP [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede] [ 194.363764] RSP <ffff9ceabebdfac0> [ 194.363791] CR2: 00000000000008dc Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2019, 22:07:36 UTC
1b53d64 Eric Dumazet 08 November 2019, 04:08:19 UTC net: fix data-race in neigh_event_send() KCSAN reported the following data-race [1] The fix will also prevent the compiler from optimizing out the condition. [1] BUG: KCSAN: data-race in neigh_resolve_output / neigh_resolve_output write to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 1: neigh_event_send include/net/neighbour.h:443 [inline] neigh_resolve_output+0x78/0x480 net/core/neighbour.c:1474 neigh_output include/net/neighbour.h:511 [inline] ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290 ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip_output+0xdf/0x210 net/ipv4/ip_output.c:432 dst_output include/net/dst.h:436 [inline] ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125 __ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532 ip_queue_xmit+0x45/0x60 include/net/ip.h:237 __tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169 tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline] __tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976 tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999 tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598 tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:618 read to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 0: neigh_event_send include/net/neighbour.h:442 [inline] neigh_resolve_output+0x57/0x480 net/core/neighbour.c:1474 neigh_output include/net/neighbour.h:511 [inline] ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228 __ip_finish_output net/ipv4/ip_output.c:308 [inline] __ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290 ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip_output+0xdf/0x210 net/ipv4/ip_output.c:432 dst_output include/net/dst.h:436 [inline] ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125 __ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532 ip_queue_xmit+0x45/0x60 include/net/ip.h:237 __tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169 tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline] __tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976 tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999 tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2019, 21:59:53 UTC
abf6c39 Linus Torvalds 08 November 2019, 21:42:40 UTC Merge tag 'pwm/for-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fix from Thierry Reding: "One more fix to keep a reference to the driver's module as long as there are users of the PWM exposed by the driver" * tag 'pwm/for-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: bcm-iproc: Prevent unloading the driver module while in use 08 November 2019, 21:42:40 UTC
6e2df05 Peter Zijlstra 08 November 2019, 10:11:52 UTC sched: Fix pick_next_task() vs 'change' pattern race Commit 67692435c411 ("sched: Rework pick_next_task() slow-path") inadvertly introduced a race because it changed a previously unexplored dependency between dropping the rq->lock and sched_class::put_prev_task(). The comments about dropping rq->lock, in for example newidle_balance(), only mentions the task being current and ->on_cpu being set. But when we look at the 'change' pattern (in for example sched_setnuma()): queued = task_on_rq_queued(p); /* p->on_rq == TASK_ON_RQ_QUEUED */ running = task_current(rq, p); /* rq->curr == p */ if (queued) dequeue_task(...); if (running) put_prev_task(...); /* change task properties */ if (queued) enqueue_task(...); if (running) set_next_task(...); It becomes obvious that if we do this after put_prev_task() has already been called on @p, things go sideways. This is exactly what the commit in question allows to happen when it does: prev->sched_class->put_prev_task(rq, prev, rf); if (!rq->nr_running) newidle_balance(rq, rf); The newidle_balance() call will drop rq->lock after we've called put_prev_task() and that allows the above 'change' pattern to interleave and mess up the state. Furthermore, it turns out we lost the RT-pull when we put the last DL task. Fix both problems by extracting the balancing from put_prev_task() and doing a multi-class balance() pass before put_prev_task(). Fixes: 67692435c411 ("sched: Rework pick_next_task() slow-path") Reported-by: Quentin Perret <qperret@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Quentin Perret <qperret@google.com> Tested-by: Valentin Schneider <valentin.schneider@arm.com> 08 November 2019, 21:34:14 UTC
e3b8b6a Qais Yousef 05 November 2019, 11:22:12 UTC sched/core: Fix compilation error when cgroup not selected When cgroup is disabled the following compilation error was hit kernel/sched/core.c: In function ‘uclamp_update_active_tasks’: kernel/sched/core.c:1081:23: error: storage size of ‘it’ isn’t known struct css_task_iter it; ^~ kernel/sched/core.c:1084:2: error: implicit declaration of function ‘css_task_iter_start’; did you mean ‘__sg_page_iter_start’? [-Werror=implicit-function-declaration] css_task_iter_start(css, 0, &it); ^~~~~~~~~~~~~~~~~~~ __sg_page_iter_start kernel/sched/core.c:1085:14: error: implicit declaration of function ‘css_task_iter_next’; did you mean ‘__sg_page_iter_next’? [-Werror=implicit-function-declaration] while ((p = css_task_iter_next(&it))) { ^~~~~~~~~~~~~~~~~~ __sg_page_iter_next kernel/sched/core.c:1091:2: error: implicit declaration of function ‘css_task_iter_end’; did you mean ‘get_task_cred’? [-Werror=implicit-function-declaration] css_task_iter_end(&it); ^~~~~~~~~~~~~~~~~ get_task_cred kernel/sched/core.c:1081:23: warning: unused variable ‘it’ [-Wunused-variable] struct css_task_iter it; ^~ cc1: some warnings being treated as errors make[2]: *** [kernel/sched/core.o] Error 1 Fix by protetion uclamp_update_active_tasks() with CONFIG_UCLAMP_TASK_GROUP Fixes: babbe170e053 ("sched/uclamp: Update CPU's refcount on TG's clamp changes") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Patrick Bellasi <patrick.bellasi@matbug.net> Cc: Mel Gorman <mgorman@suse.de> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Ben Segall <bsegall@google.com> Link: https://lkml.kernel.org/r/20191105112212.596-1-qais.yousef@arm.com 08 November 2019, 21:34:14 UTC
65de03e Tejun Heo 08 November 2019, 20:18:29 UTC cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead cgroup writeback tries to refresh the associated wb immediately if the current wb is dead. This is to avoid keeping issuing IOs on the stale wb after memcg - blkcg association has changed (ie. when blkcg got disabled / enabled higher up in the hierarchy). Unfortunately, the logic gets triggered spuriously on inodes which are associated with dead cgroups. When the logic is triggered on dead cgroups, the attempt fails only after doing quite a bit of work allocating and initializing a new wb. While c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if mapping has no dirty pages") alleviated the issue significantly as it now only triggers when the inode has dirty pages. However, the condition can still be triggered before the inode is switched to a different cgroup and the logic simply doesn't make sense. Skip the immediate switching if the associated memcg is dying. This is a simplified version of the following two patches: * https://lore.kernel.org/linux-mm/20190513183053.GA73423@dennisz-mbp/ * http://lkml.kernel.org/r/156355839560.2063.5265687291430814589.stgit@buzz Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: e8a7abf5a5bd ("writeback: disassociate inodes from dying bdi_writebacks") Acked-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> 08 November 2019, 20:37:24 UTC
0689acf Linus Torvalds 08 November 2019, 20:31:27 UTC Merge tag 'ceph-for-5.4-rc7' of git://github.com/ceph/ceph-client Pull ceph fixes from Ilya Dryomov: "Some late-breaking dentry handling fixes from Al and Jeff, a patch to further restrict copy_file_range() to avoid potential data corruption from Luis and a fix for !CONFIG_CEPH_FSCACHE kernels. Everything but the fscache fix is marked for stable" * tag 'ceph-for-5.4-rc7' of git://github.com/ceph/ceph-client: ceph: return -EINVAL if given fsc mount option on kernel w/o support ceph: don't allow copy_file_range when stripe_count != 1 ceph: don't try to handle hashed dentries in non-O_CREAT atomic_open ceph: add missing check in d_revalidate snapdir handling ceph: fix RCU case handling in ceph_d_revalidate() ceph: fix use-after-free in __ceph_remove_cap() 08 November 2019, 20:31:27 UTC
ad8a722 Stefano Garzarella 08 November 2019, 16:08:50 UTC vsock/virtio: fix sock refcnt holding during the shutdown The "42f5cda5eaf4" commit rightly set SOCK_DONE on peer shutdown, but there is an issue if we receive the SHUTDOWN(RDWR) while the virtio_transport_close_timeout() is scheduled. In this case, when the timeout fires, the SOCK_DONE is already set and the virtio_transport_close_timeout() will not call virtio_transport_reset() and virtio_transport_do_close(). This causes that both sockets remain open and will never be released, preventing the unloading of [virtio|vhost]_transport modules. This patch fixes this issue, calling virtio_transport_reset() and virtio_transport_do_close() when we receive the SHUTDOWN(RDWR) and there is nothing left to read. Fixes: 42f5cda5eaf4 ("vsock/virtio: set SOCK_DONE on peer shutdown") Cc: Stephen Barber <smbarber@chromium.org> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2019, 20:17:50 UTC
b05f5b4 David S. Miller 08 November 2019, 19:37:24 UTC Merge tag 'mac80211-for-net-2019-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Three small fixes: * we hit a failure path bug related to ieee80211_txq_setup_flows() * also use kvmalloc() to make that less likely * fix a timing value shortly after boot (during INITIAL_JIFFIES) ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2019, 19:37:24 UTC
e4dd560 Alexander Sverdlin 08 November 2019, 10:00:44 UTC net: ethernet: octeon_mgmt: Account for second possible VLAN header Octeon's input ring-buffer entry has 14 bits-wide size field, so to account for second possible VLAN header max_mtu must be further reduced. Fixes: 109cc16526c6d ("ethernet/cavium: use core min/max MTU checking") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2019, 19:18:40 UTC
6737e76 Linus Torvalds 08 November 2019, 17:48:19 UTC Merge tag 'modules-for-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules fix from Jessica Yu: "Fix `make nsdeps` for modules composed of multiple source files. Since $mod_source_files was not in quotes in the call to generate_deps_for_ns(), not all the source files for a module were being passed to spatch" * tag 'modules-for-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: scripts/nsdeps: make sure to pass all module source files to spatch 08 November 2019, 17:48:19 UTC
9e8ed26 Linus Torvalds 08 November 2019, 17:43:34 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Will Deacon: "Fix pte_same() to avoid getting stuck on write fault. This single arm64 fix is a revert of 747a70e60b72 ("arm64: Fix copy-on-write referencing in HugeTLB"), not because that patch was wrong, but because it was broken by aa57157be69f ("arm64: Ensure VM_WRITE|VM_SHARED ptes are clean by default") which we merged in -rc6. We spotted the issue in Android (AOSP), where one of the JIT threads gets stuck on a write fault during boot because the faulting pte is marked as PTE_DIRTY | PTE_WRITE | PTE_RDONLY and the fault handler decides that there's nothing to do thanks to pte_same() masking out PTE_RDONLY. Thanks to John Stultz for reporting this and testing this so quickly, and to Steve Capper for confirming that the HugeTLB tests continue to pass" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Do not mask out PTE_RDONLY in pte_same() 08 November 2019, 17:43:34 UTC
24906a4 Uwe Kleine-König 17 October 2019, 19:22:18 UTC pwm: bcm-iproc: Prevent unloading the driver module while in use The owner member of struct pwm_ops must be set to THIS_MODULE to increase the reference count of the module such that the module cannot be removed while its code is in use. Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> 08 November 2019, 17:38:06 UTC
410ef73 Linus Torvalds 08 November 2019, 16:46:49 UTC Merge tag 'xarray-5.4' of git://git.infradead.org/users/willy/linux-dax Pull XArray fixes from Matthew Wilcox: "These all fix various bugs, some of which people have tripped over and some of which have been caught by automatic tools" * tag 'xarray-5.4' of git://git.infradead.org/users/willy/linux-dax: idr: Fix idr_alloc_u32 on 32-bit systems idr: Fix integer overflow in idr_for_each_entry radix tree: Remove radix_tree_iter_find idr: Fix idr_get_next_ul race with idr_remove XArray: Fix xas_next() with a single entry at 0 08 November 2019, 16:46:49 UTC
4d8b326 Linus Torvalds 08 November 2019, 16:33:32 UTC Merge tag 'pm-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix an 'unchecked MSR access' warning in the intel_pstate cpufreq driver (Srinivas Pandruvada)" * tag 'pm-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Fix invalid EPB setting 08 November 2019, 16:33:32 UTC
8ac2a11 Linus Torvalds 08 November 2019, 16:22:19 UTC Merge tag 'sound-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "It became a bit largish, but all small and good for 5.4: - A regression fix of ALSA timer code bug that sneaked in by a recent cleanup; never trust innocent-looking guys... - Fix for compress API max size check signedness - Fixes in HD-audio: CA0132 work stall, Intel Tigerlake HDMI - A few fixes for SOF: memory leak, sanity-check and build fixes - A collection of device-specific fixes: firewire, rockchip, ASoC HDMI, rsnd, ASoC HDA, stm32, TI, kirkwood, msm, max98373" * tag 'sound-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: timer: Fix incorrectly assigned timer instance ASoC: SOF: topology: Fix bytes control size checks ALSA: hda: hdmi - add Tigerlake support ASoC: max98373: replace gpio_request with devm_gpio_request ASoC: stm32: sai: add restriction on mmap support ALSA: hda/ca0132 - Fix possible workqueue stall ASoC: hdac_hda: fix race in device removal ALSA: bebob: fix to detect configured source of sampling clock for Focusrite Saffire Pro i/o series ASoC: rockchip: rockchip_max98090: Enable SHDN to fix headset detection ASoC: ti: sdma-pcm: Add back the flags parameter for non standard dma names ASoC: SOF: ipc: Fix memory leak in sof_set_get_large_ctrl_data ASoC: SOF: Fix memory leak in sof_dfsentry_write ASoC: SOF: Intel: hda-stream: fix the CONFIG_ prefix missing ASoC: kirkwood: fix device remove ordering ASoC: rsnd: dma: fix SSI9 4/5/6/7 busif dma address ASoC: hdmi-codec: drop mutex locking again ASoC: kirkwood: fix external clock probe defer ASoC: compress: fix unsigned integer overflow check ASoC: msm8916-wcd-analog: Fix RX1 selection in RDAC2 MUX 08 November 2019, 16:22:19 UTC
efc61f7 Linus Torvalds 08 November 2019, 16:17:22 UTC Merge tag 'drm-fixes-2019-11-08' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Weekly fixes for drm: amdgpu has a few but they are pretty scattered fixes, the fbdev one is a build regression fix that we didn't want to risk leaving out, otherwise a couple of i915, one radeon and a core atomic fix. core: - add missing documentation for GEM shmem madvise helpers - Fix for a state dereference in atomic self-refresh helpers fbdev: - One compilation fix for c2p fbdev helpers amdgpu: - Fix navi14 display issue root cause and revert workaround - GPU reset scheduler interaction fix - Fix fan boost on multi-GPU - Gfx10 and sdma5 fixes for navi - GFXOFF fix for renoir - Add navi14 PCI ID - GPUVM fix for arcturus radeon: - Port an SI power fix from amdgpu i915: - Fix HPD poll to avoid kworker consuming a lot of cpu cycles. - Do not use TBT type for non Type-C ports" * tag 'drm-fixes-2019-11-08' of git://anongit.freedesktop.org/drm/drm: drm/radeon: fix si_enable_smc_cac() failed issue drm/amdgpu/renoir: move gfxoff handling into gfx9 module drm/amdgpu: add warning for GRBM 1-cycle delay issue in gfx9 drm/amdgpu: add dummy read by engines for some GCVM status registers in gfx10 drm/amdgpu: register gpu instance before fan boost feature enablment drm/amd/swSMU: fix smu workload bit map error drm/shmem: Add docbook comments for drm_gem_shmem_object madvise fields drm/amdgpu: add navi14 PCI ID Revert "drm/amd/display: setting the DIG_MODE to the correct value." drm/amd/display: Add ENGINE_ID_DIGD condition check for Navi14 drm/amdgpu: dont schedule jobs while in reset drm/amdgpu/arcturus: properly set BANK_SELECT and FRAGMENT_SIZE drm/atomic: fix self-refresh helpers crtc state dereference drm/i915/dp: Do not switch aux to TBT mode for non-TC ports drm/i915: Avoid HPD poll detect triggering a new detect cycle fbdev: c2p: Fix link failure on non-inlining 08 November 2019, 16:17:22 UTC
d988f88 Linus Torvalds 08 November 2019, 16:15:01 UTC Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Fixes for various clk driver issues that happened because of code we merged this merge window. The Amlogic driver was missing some flags causing rates to be rounded improperly or clk_set_rate() to fail. The Samsung driver wasn't freeing everything on error paths and improperly saving/restoring PLL state across suspend/resume. The at91 driver was calling msleep() too early when scheduling hadn't started, so we put in place a quick solution until we can handle this sort of problem in the core framework. There were also problems with the Allwinner driver and operator precedence being incorrect causing subtle bugs. Finally, the TI driver was duplicating aliases and not delaying long enough leading to some unexpected timeouts" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: ti: clkctrl: Fix failed to enable error with double udelay timeout clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18 clk: sunxi: Fix operator precedence in sunxi_divs_clk_setup clk: ast2600: Fix enabling of clocks clk: at91: avoid sleeping early clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARM clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU clk: samsung: exynos5433: Fix error paths clk: at91: sam9x60: fix programmable clock clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes clk: meson: g12a: fix cpu clock rate setting clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate 08 November 2019, 16:15:01 UTC
8e9c523 Dan Carpenter 07 November 2019, 07:48:47 UTC block: drbd: remove a stray unlock in __drbd_send_protocol() There are two callers of this function and they both unlock the mutex so this ends up being a double unlock. Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 08 November 2019, 13:55:22 UTC
c31432f Srinivas Pandruvada 31 October 2019, 19:26:20 UTC cpufreq: intel_pstate: Fix invalid EPB setting The max value of EPB can only be 0x0F. Attempting to set more than that triggers an "unchecked MSR access error" warning which happens in intel_pstate_hwp_force_min_perf() called via cpufreq stop_cpu(). However, it is not even necessary to touch the EPB from intel_pstate, because it is restored on every CPU online by the intel_epb.c code, so let that code do the right thing and drop the redundant (and incorrect) EPB update from intel_pstate. Fixes: af3b7379e2d70 ("cpufreq: intel_pstate: Force HWP min perf before offline") Reported-by: Qian Cai <cai@lca.pw> Cc: 5.2+ <stable@vger.kernel.org> # 5.2+ Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 08 November 2019, 10:29:58 UTC
285531f Ahmed Zaki 31 October 2019, 12:12:43 UTC mac80211: fix station inactive_time shortly after boot In the first 5 minutes after boot (time of INITIAL_JIFFIES), ieee80211_sta_last_active() returns zero if last_ack is zero. This leads to "inactive time" showing jiffies_to_msecs(jiffies). # iw wlan0 station get fc:ec:da:64:a6:dd Station fc:ec:da:64:a6:dd (on wlan0) inactive time: 4294894049 ms . . connected time: 70 seconds Fix by returning last_rx if last_ack == 0. Signed-off-by: Ahmed Zaki <anzaki@gmail.com> Link: https://lore.kernel.org/r/20191031121243.27694-1-anzaki@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 08 November 2019, 08:17:28 UTC
71e67c3 Toke Høiland-Jørgensen 05 November 2019, 15:57:50 UTC net/fq_impl: Switch to kvmalloc() for memory allocation The FQ implementation used by mac80211 allocates memory using kmalloc(), which can fail; and Johannes reported that this actually happens in practice. To avoid this, switch the allocation to kvmalloc() instead; this also brings fq_impl in line with all the FQ qdiscs. Fixes: 557fc4a09803 ("fq: add fair queuing framework") Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20191105155750.547379-1-toke@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> 08 November 2019, 08:11:49 UTC
6dd47d9 Johannes Berg 05 November 2019, 14:41:11 UTC mac80211: fix ieee80211_txq_setup_flows() failure path If ieee80211_txq_setup_flows() fails, we don't clean up LED state properly, leading to crashes later on, fix that. Fixes: dc8b274f0952 ("mac80211: Move up init of TXQs") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20191105154110.1ccf7112ba5d.I0ba865792446d051867b33153be65ce6b063d98c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> 08 November 2019, 08:11:33 UTC
ff92345 Dave Airlie 08 November 2019, 03:07:58 UTC Merge tag 'drm-fixes-5.4-2019-11-06' of git://people.freedesktop.org/~agd5f/linux into drm-fixes drm-fixes-5.4-2019-11-06: amdgpu: - Fix navi14 display issue root cause and revert workaround - GPU reset scheduler interaction fix - Fix fan boost on multi-GPU - Gfx10 and sdma5 fixes for navi - GFXOFF fix for renoir - Add navi14 PCI ID - GPUVM fix for arcturus radeon: - Port an SI power fix from amdgpu Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107032241.1021217-1-alexander.deucher@amd.com 08 November 2019, 03:07:58 UTC
67322be Dave Airlie 08 November 2019, 03:07:39 UTC Merge tag 'drm-intel-fixes-2019-11-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix HPD poll to avoid kworker consuming a lot of cpu cycles. - Do not use TBT type for non Type-C ports. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191106213958.GA16525@intel.com 08 November 2019, 03:07:44 UTC
72d74a0 Dave Airlie 08 November 2019, 02:12:49 UTC Merge tag 'drm-misc-fixes-2019-11-07-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - Some new documentation for GEM shmem madvise helpers - Fix for a state dereference in atomic self-refresh helpers - One compilation fix for c2p fbdev helpers Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191107082215.GA34850@gilmour.lan 08 November 2019, 02:12:57 UTC
e0a3126 David Ahern 07 November 2019, 18:29:52 UTC ipv4: Fix table id reference in fib_sync_down_addr Hendrik reported routes in the main table using source address are not removed when the address is removed. The problem is that fib_sync_down_addr does not account for devices in the default VRF which are associated with the main table. Fix by updating the table id reference. Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs") Reported-by: Hendrik Donner <hd@os-cillation.de> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2019, 00:14:36 UTC
1bef4c2 Eric Dumazet 07 November 2019, 17:26:19 UTC ipv6: fixes rt6_probe() and fib6_nh->last_probe init While looking at a syzbot KCSAN report [1], I found multiple issues in this code : 1) fib6_nh->last_probe has an initial value of 0. While probably okay on 64bit kernels, this causes an issue on 32bit kernels since the time_after(jiffies, 0 + interval) might be false ~24 days after boot (for HZ=1000) 2) The data-race found by KCSAN I could use READ_ONCE() and WRITE_ONCE(), but we also can take the opportunity of not piling-up too many rt6_probe_deferred() works by using instead cmpxchg() so that only one cpu wins the race. [1] BUG: KCSAN: data-race in find_match / find_match write to 0xffff8880bb7aabe8 of 8 bytes by interrupt on cpu 1: rt6_probe net/ipv6/route.c:663 [inline] find_match net/ipv6/route.c:757 [inline] find_match+0x5bd/0x790 net/ipv6/route.c:733 __find_rr_leaf+0xe3/0x780 net/ipv6/route.c:831 find_rr_leaf net/ipv6/route.c:852 [inline] rt6_select net/ipv6/route.c:896 [inline] fib6_table_lookup+0x383/0x650 net/ipv6/route.c:2164 ip6_pol_route+0xee/0x5c0 net/ipv6/route.c:2200 ip6_pol_route_output+0x48/0x60 net/ipv6/route.c:2452 fib6_rule_lookup+0x3d6/0x470 net/ipv6/fib6_rules.c:117 ip6_route_output_flags_noref+0x16b/0x230 net/ipv6/route.c:2484 ip6_route_output_flags+0x50/0x1a0 net/ipv6/route.c:2497 ip6_dst_lookup_tail+0x25d/0xc30 net/ipv6/ip6_output.c:1049 ip6_dst_lookup_flow+0x68/0x120 net/ipv6/ip6_output.c:1150 inet6_csk_route_socket+0x2f7/0x420 net/ipv6/inet6_connection_sock.c:106 inet6_csk_xmit+0x91/0x1f0 net/ipv6/inet6_connection_sock.c:121 __tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169 tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline] tcp_xmit_probe_skb+0x19b/0x1d0 net/ipv4/tcp_output.c:3735 read to 0xffff8880bb7aabe8 of 8 bytes by interrupt on cpu 0: rt6_probe net/ipv6/route.c:657 [inline] find_match net/ipv6/route.c:757 [inline] find_match+0x521/0x790 net/ipv6/route.c:733 __find_rr_leaf+0xe3/0x780 net/ipv6/route.c:831 find_rr_leaf net/ipv6/route.c:852 [inline] rt6_select net/ipv6/route.c:896 [inline] fib6_table_lookup+0x383/0x650 net/ipv6/route.c:2164 ip6_pol_route+0xee/0x5c0 net/ipv6/route.c:2200 ip6_pol_route_output+0x48/0x60 net/ipv6/route.c:2452 fib6_rule_lookup+0x3d6/0x470 net/ipv6/fib6_rules.c:117 ip6_route_output_flags_noref+0x16b/0x230 net/ipv6/route.c:2484 ip6_route_output_flags+0x50/0x1a0 net/ipv6/route.c:2497 ip6_dst_lookup_tail+0x25d/0xc30 net/ipv6/ip6_output.c:1049 ip6_dst_lookup_flow+0x68/0x120 net/ipv6/ip6_output.c:1150 inet6_csk_route_socket+0x2f7/0x420 net/ipv6/inet6_connection_sock.c:106 inet6_csk_xmit+0x91/0x1f0 net/ipv6/inet6_connection_sock.c:121 __tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 18894 Comm: udevd Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: cc3a86c802f0 ("ipv6: Change rt6_probe to take a fib6_nh") Fixes: f547fac624be ("ipv6: rate-limit probes for neighbourless routes") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2019, 00:13:13 UTC
bf5a6b4 Salil Mehta 07 November 2019, 17:09:53 UTC net: hns: Fix the stray netpoll locks causing deadlock in NAPI path This patch fixes the problem of the spin locks, originally meant for the netpoll path of hns driver, causing deadlock in the normal NAPI poll path. The issue happened due to the presence of the stray leftover spin lock code related to the netpoll, whose support was earlier removed from the HNS[1], got activated due to enabling of NET_POLL_CONTROLLER switch. Earlier background: The netpoll handling code originally had this bug(as identified by Marc Zyngier[2]) of wrong spin lock API being used which did not disable the interrupts and hence could cause locking issues. i.e. if the lock were first acquired in context to thread like 'ip' util and this lock if ever got later acquired again in context to the interrupt context like TX/RX (Interrupts could always pre-empt the lock holding task and acquire the lock again) and hence could cause deadlock. Proposed Solution: 1. If the netpoll was enabled in the HNS driver, which is not right now, we could have simply used spin_[un]lock_irqsave() 2. But as netpoll is disabled, therefore, it is best to get rid of the existing locks and stray code for now. This should solve the problem reported by Marc. [1] https://git.kernel.org/torvalds/c/4bd2c03be7 [2] https://patchwork.ozlabs.org/patch/1189139/ Fixes: 4bd2c03be707 ("net: hns: remove ndo_poll_controller") Cc: lipeng <lipeng321@huawei.com> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Eric Dumazet <edumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Reported-by: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Tested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2019, 00:12:15 UTC
e497df6 Aleksander Morgado 07 November 2019, 10:57:01 UTC net: usb: qmi_wwan: add support for DW5821e with eSIM support Exactly same layout as the default DW5821e module, just a different vid/pid. The QMI interface is exposed in USB configuration #1: P: Vendor=413c ProdID=81e0 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5821e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 23:49:49 UTC
332f989 Oliver Neukum 07 November 2019, 08:48:01 UTC CDC-NCM: handle incomplete transfer of MTU A malicious device may give half an answer when asked for its MTU. The driver will proceed after this with a garbage MTU. Anything but a complete answer must be treated as an error. V2: used sizeof as request by Alexander Reported-and-tested-by: syzbot+0631d878823ce2411636@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 23:27:06 UTC
025ec40 Pan Bian 07 November 2019, 06:29:50 UTC nfc: netlink: fix double device reference drop The function nfc_put_device(dev) is called twice to drop the reference to dev when there is no associated local llcp. Remove one of them to fix the bug. Fixes: 52feb444a903 ("NFC: Extend netlink interface for LTO, RW, and MIUX parameters support") Fixes: d9b8d8e19b07 ("NFC: llcp: Service Name Lookup netlink interface") Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 23:23:19 UTC
847120f Linus Torvalds 07 November 2019, 19:54:54 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: "Two fixes for the HID subsystem: - regression fix for i2c-hid power management (Hans de Goede) - signed vs unsigned API fix for Wacom driver (Jason Gerecke)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: wacom: generic: Treat serial number and related fields as unsigned HID: i2c-hid: Send power-on command after reset 07 November 2019, 19:54:54 UTC
ff29fde Jeff Layton 07 November 2019, 14:39:32 UTC ceph: return -EINVAL if given fsc mount option on kernel w/o support If someone requests fscache on the mount, and the kernel doesn't support it, it should fail the mount. [ Drop ceph prefix -- it's provided by pr_err. ] Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> 07 November 2019, 17:03:23 UTC
e39fcae Wei Yongjun 06 November 2019, 11:59:54 UTC staging: Fix error return code in vboxsf_fill_super() Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Fixes: df4028658f9d ("staging: Add VirtualBox guest shared folder (vboxsf) support") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20191106115954.114678-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 November 2019, 15:29:18 UTC
94fed40 Colin Ian King 05 November 2019, 17:51:08 UTC staging: vboxsf: fix dereference of pointer dentry before it is null checked Currently the pointer dentry is being dereferenced before it is being null checked. Fix this by only dereferencing dentry once we know it is not null. Addresses-Coverity: ("Dereference before null check") Fixes: df4028658f9d ("staging: Add VirtualBox guest shared folder (vboxsf) support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20191105175108.79824-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 November 2019, 15:29:17 UTC
32e9f6c YueHaibing 07 November 2019, 01:59:23 UTC staging: vboxsf: Remove unused including <linux/version.h> Remove including <linux/version.h> that don't need it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20191107015923.100013-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 07 November 2019, 15:29:17 UTC
df37d94 Takashi Iwai 07 November 2019, 12:52:17 UTC Merge tag 'asoc-fix-v5.4-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.4 These are a collection of fixes since v5.4-rc4 that have accumilated, they're all driver specific and there's nothing major in here so it's probably not essential to actually send them but I'll leave that call to you. 07 November 2019, 12:52:17 UTC
63e006c Amelie Delaunay 04 November 2019, 10:09:08 UTC pinctrl: stmfx: fix valid_mask init sequence With stmfx_pinctrl_gpio_init_valid_mask callback, gpio_valid_mask was used to initialize gpiochip valid_mask for gpiolib. But gpio_valid_mask was not yet initialized. gpio_valid_mask required gpio-ranges to be registered, this is the case after gpiochip_add_data call. But init_valid_mask callback is also called under gpiochip_add_data. gpio_valid_mask initialization cannot be moved before gpiochip_add_data because gpio-ranges are not registered. So, it is not possible to use init_valid_mask callback. To avoid this issue, get rid of valid_mask and rely on ranges. Fixes: da9b142ab2c5 ("pinctrl: stmfx: Use the callback to populate valid_mask") Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20191104100908.10880-1-amelie.delaunay@st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 07 November 2019, 09:06:46 UTC
99a8efb Pan Bian 07 November 2019, 01:33:20 UTC NFC: st21nfca: fix double free The variable nfcid_skb is not changed in the callee nfc_hci_get_param() if error occurs. Consequently, the freed variable nfcid_skb will be freed again, resulting in a double free bug. Set nfcid_skb to NULL after releasing it to fix the bug. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:48:29 UTC
648db05 Huazhong Tan 07 November 2019, 01:30:19 UTC net: hns3: add compatible handling for command HCLGE_OPC_PF_RST_DONE Since old firmware does not support HCLGE_OPC_PF_RST_DONE, it will return -EOPNOTSUPP to the driver when received this command. So for this case, it should just print a warning and return success to the caller. Fixes: 72e2fb07997c ("net: hns3: clear reset interrupt status in hclge_irq_handle()") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:46:56 UTC
c78806f David S. Miller 07 November 2019, 05:39:48 UTC Merge tag 'mlx5-fixes-2019-11-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahamees says: ==================== Mellanox, mlx5 fixes 2019-11-06 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. No -stable this time. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:39:48 UTC
9c6850f Heiner Kallweit 06 November 2019, 20:51:31 UTC r8169: fix page read in r8168g_mdio_read Functions like phy_modify_paged() read the current page, on Realtek PHY's this means reading the value of register 0x1f. Add special handling for reading this register, similar to what we do already in r8168g_mdio_write(). Currently we read a random value that by chance seems to be 0 always. Fixes: a2928d28643e ("r8169: use paged versions of phylib MDIO access functions") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:36:48 UTC
58b87d2 David S. Miller 07 November 2019, 05:22:56 UTC Merge branch 'stmmac-fixes' Jose Abreu says: ==================== net: stmmac: Fixes for -net Misc fixes for stmmac. Patch 1/11 and 2/11, use the correct variable type for bitrev32() calls. Patch 3/11, fixes the random failures the we were seing when running selftests. Patch 4/11, prevents a crash that can occur when receiving AVB packets and with SPH feature enabled on XGMAC. Patch 5/11, fixes the correct settings for CBS on XGMAC. Patch 6/11, corrects the interpretation of AVB feature on XGMAC. Patch 7/11, disables Flow Control for AVB enabled queues on XGMAC. Patch 8/11, disables MMC interrupts on XGMAC, preventing a storm of interrupts. Patch 9/11, fixes the number of packets that were being taken into account in the RX path cleaning function. Patch 10/11, fixes an incorrect descriptor setting that could cause IP misbehavior. Patch 11/11, fixes the IOC generation mechanism when multiple descriptors are used. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:22:56 UTC
7df4a3a Jose Abreu 06 November 2019, 15:03:05 UTC net: stmmac: Fix the TX IOC in xmit path IOC bit must be only set in the last descriptor. Move the logic up a little bit to make sure it's set in the correct descriptor. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:22:55 UTC
b2f0719 Jose Abreu 06 November 2019, 15:03:04 UTC net: stmmac: Fix TSO descriptor with Enhanced Addressing When using addressing > 32 bits the TSO first descriptor only has the header so we can't set the payload field for this descriptor. Let's reset the variable so that buffer 2 value is zero. Fixes: a993db88d17d ("net: stmmac: Enable support for > 32 Bits addressing in XGMAC") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:22:55 UTC
cda4985 Jose Abreu 06 November 2019, 15:03:03 UTC net: stmmac: Fix the packet count in stmmac_rx() Currently, stmmac_rx() is counting the number of descriptors but it should count the number of packets as specified by the NAPI limit. Fix this. Fixes: ec222003bd94 ("net: stmmac: Prepare to add Split Header support") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:22:55 UTC
aeb18dd Jose Abreu 06 November 2019, 15:03:02 UTC net: stmmac: xgmac: Disable MMC interrupts by default MMC interrupts were being enabled, which is not what we want because it will lead to a storm of interrupts that are not handled at all. Fix it by disabling all MMC interrupts for XGMAC. Fixes: b6cdf09f51c2 ("net: stmmac: xgmac: Implement MMC counters") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:22:55 UTC
132f2f2 Jose Abreu 06 November 2019, 15:03:01 UTC net: stmmac: xgmac: Disable Flow Control when 1 or more queues are in AV When in AVB mode we need to disable flow control to prevent MAC from pausing in TX side. Fixes: ec6ea8e3eee9 ("net: stmmac: Add CBS support in XGMAC2") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:22:55 UTC
08c1ac3 Jose Abreu 06 November 2019, 15:03:00 UTC net: stmmac: xgmac: Fix AV Feature detection Fix incorrect precedence of operators. For reference: AV implies AV Feature but RAV implies only RX side AV Feature. As we want full AV features we need to check RAV. Fixes: c2b69474d63b ("net: stmmac: xgmac: Correct RAVSEL field interpretation") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:22:55 UTC
97add93 Jose Abreu 06 November 2019, 15:02:59 UTC net: stmmac: xgmac: Fix TSA selection When we change between Transmission Scheduling Algorithms, we need to clear previous values so that the new chosen algorithm is correctly selected. Fixes: ec6ea8e3eee9 ("net: stmmac: Add CBS support in XGMAC2") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:22:55 UTC
9614737 Jose Abreu 06 November 2019, 15:02:58 UTC net: stmmac: xgmac: Only get SPH header len if available Split Header length is only available when L34T == 0. Fix this by correctly checking if L34T is zero before trying to get Header length. Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:22:55 UTC
eeb9d74 Jose Abreu 06 November 2019, 15:02:57 UTC net: stmmac: selftests: Prevent false positives in filter tests In L2 tests that filter packets by destination MAC address we need to prevent false positives that can occur if we add an address that collides with the existing ones. To fix this, lets manually check if the new address to be added is already present in the NIC and use a different one if so. For Hash filtering this also envolves converting the address to the hash. Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:22:55 UTC
3d00e45 Jose Abreu 06 November 2019, 15:02:56 UTC net: stmmac: xgmac: bitrev32 returns u32 The bitrev32 function returns an u32 var, not an int. Fix it. Fixes: 0efedbf11f07 ("net: stmmac: xgmac: Fix XGMAC selftests") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:22:55 UTC
4d7c47e Jose Abreu 06 November 2019, 15:02:55 UTC net: stmmac: gmac4: bitrev32 returns u32 The bitrev32 function returns an u32 var, not an int. Fix it. Fixes: 477286b53f55 ("stmmac: add GMAC4 core support") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:22:55 UTC
53ba60a David S. Miller 07 November 2019, 05:16:55 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Missing register size validation in bitwise and cmp offloads. 2) Fix error code in ip_set_sockfn_get() when copy_to_user() fails, from Dan Carpenter. 3) Oneliner to copy MAC address in IPv6 hash:ip,mac sets, from Stefano Brivio. 4) Missing policy validation in ipset with NL_VALIDATE_STRICT, from Jozsef Kadlecsik. 5) Fix unaligned access to private data area of nf_tables instructions, from Lukas Wunner. 6) Relax check for object updates, reported as a regression by Eric Garver, patch from Fernando Fernandez Mancera. 7) Crash on ebtables dnat extension when used from the output path. From Florian Westphal. 8) Fix bogus EOPNOTSUPP when updating basechain flags. 9) Fix bogus EBUSY when updating a basechain that is already offloaded. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 05:16:55 UTC
d243af7 Pavel Shilovsky 06 November 2019, 21:58:15 UTC SMB3: Fix persistent handles reconnect When the client hits a network reconnect, it re-opens every open file with a create context to reconnect a persistent handle. All create context types should be 8-bytes aligned but the padding was missed for that one. As a result, some servers don't allow us to reconnect handles and return an error. The problem occurs when the problematic context is not at the end of the create request packet. Fix this by adding a proper padding at the end of the reconnect persistent handle context. Cc: Stable <stable@vger.kernel.org> # 4.19.x Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> 07 November 2019, 03:32:18 UTC
2c409ba Alex Deucher 30 October 2019, 14:21:28 UTC drm/radeon: fix si_enable_smc_cac() failed issue Need to set the dte flag on this asic. Port the fix from amdgpu: 5cb818b861be114 ("drm/amd/amdgpu: fix si_enable_smc_cac() failed issue") Reviewed-by: Yong Zhao <yong.zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 07 November 2019, 03:06:23 UTC
77a3160 Alex Deucher 29 October 2019, 14:36:22 UTC drm/amdgpu/renoir: move gfxoff handling into gfx9 module To properly handle the option parsing ordering. Reviewed-by: Yong Zhao <yong.zhao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 November 2019, 03:06:23 UTC
440a7a5 changzhu 05 November 2019, 10:29:12 UTC drm/amdgpu: add warning for GRBM 1-cycle delay issue in gfx9 It needs to add warning to update firmware in gfx9 in case that firmware is too old to have function to realize dummy read in cp firmware. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 November 2019, 03:06:23 UTC
589b64a changzhu 10 October 2019, 03:02:33 UTC drm/amdgpu: add dummy read by engines for some GCVM status registers in gfx10 The GRBM register interface is now capable of bursting 1 cycle per register wr->wr, wr->rd much faster than previous muticycle per transaction done interface. This has caused a problem where status registers requiring HW to update have a 1 cycle delay, due to the register update having to go through GRBM. For cp ucode, it has realized dummy read in cp firmware.It covers the use of WAIT_REG_MEM operation 1 case only.So it needs to call gfx_v10_0_wait_reg_mem in gfx10. Besides it also needs to add warning to update firmware in case firmware is too old to have function to realize dummy read in cp firmware. For sdma ucode, it hasn't realized dummy read in sdma firmware. sdma is moved to gfxhub in gfx10. So it needs to add dummy read in driver between amdgpu_ring_emit_wreg and amdgpu_ring_emit_reg_wait for sdma_v5_0. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 November 2019, 03:06:23 UTC
6a299d7 Evan Quan 05 November 2019, 10:13:49 UTC drm/amdgpu: register gpu instance before fan boost feature enablment Otherwise, the feature enablement will be skipped due to wrong count. Fixes: beff74bc6e0fa91 ("drm/amdgpu: fix a race in GPU reset with IB test (v2)") Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 November 2019, 03:06:23 UTC
38264de Kevin Wang 05 November 2019, 10:16:38 UTC drm/amd/swSMU: fix smu workload bit map error fix workload bit (WORKLOAD_PPLIB_COMPUTE_BIT) map error on vega20 and navi asic. fix commit: drm/amd/powerplay: add function get_workload_type_map for swsmu Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 07 November 2019, 03:06:23 UTC
98f3375 Ursula Braun 06 November 2019, 09:49:57 UTC net/smc: fix ethernet interface refcounting If a pnet table entry is to be added mentioning a valid ethernet interface, but an invalid infiniband or ISM device, the dev_put() operation for the ethernet interface is called twice, resulting in a negative refcount for the ethernet interface, which disables removal of such a network interface. This patch removes one of the dev_put() calls. Fixes: 890a2cb4a966 ("net/smc: rework pnet table") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 01:44:32 UTC
9990a79 David S. Miller 07 November 2019, 01:33:32 UTC Merge branch 'net-tls-add-a-TX-lock' Jakub Kicinski says: ==================== net/tls: add a TX lock Some time ago Pooja and Mallesham started reporting crashes with an async accelerator. After trying to poke the existing logic into shape I came to the conclusion that it can't be trusted, and to preserve our sanity we should just add a lock around the TX side. First patch removes the sk_write_pending checks from the write space callbacks. Those don't seem to have a logical justification. Patch 2 adds the TX lock and patch 3 associated test (which should hang with current net). Mallesham reports that even with these fixes applied the async accelerator workload still occasionally hangs waiting for socket memory. I suspect that's strictly related to the way async crypto is integrated in TLS, so I think we should get these into net or net-next and move from there. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 01:33:32 UTC
41098af Jakub Kicinski 05 November 2019, 22:24:36 UTC selftests/tls: add test for concurrent recv and send Add a test which spawns 16 threads and performs concurrent send and recv calls on the same socket. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 01:33:32 UTC
79ffe60 Jakub Kicinski 05 November 2019, 22:24:35 UTC net/tls: add a TX lock TLS TX needs to release and re-acquire the socket lock if send buffer fills up. TLS SW TX path currently depends on only allowing one thread to enter the function by the abuse of sk_write_pending. If another writer is already waiting for memory no new ones are allowed in. This has two problems: - writers don't wake other threads up when they leave the kernel; meaning that this scheme works for single extra thread (second application thread or delayed work) because memory becoming available will send a wake up request, but as Mallesham and Pooja report with larger number of threads it leads to threads being put to sleep indefinitely; - the delayed work does not get _scheduled_ but it may _run_ when other writers are present leading to crashes as writers don't expect state to change under their feet (same records get pushed and freed multiple times); it's hard to reliably bail from the work, however, because the mere presence of a writer does not guarantee that the writer will push pending records before exiting. Ensuring wakeups always happen will make the code basically open code a mutex. Just use a mutex. The TLS HW TX path does not have any locking (not even the sk_write_pending hack), yet it uses a per-socket sg_tx_data array to push records. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Reported-by: Mallesham Jatharakonda <mallesh537@gmail.com> Reported-by: Pooja Trivedi <poojatrivedi@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 01:33:32 UTC
02b1fa0 Jakub Kicinski 05 November 2019, 22:24:34 UTC net/tls: don't pay attention to sk_write_pending when pushing partial records sk_write_pending being not zero does not guarantee that partial record will be pushed. If the thread waiting for memory times out the pending record may get stuck. In case of tls_device there is no path where parial record is set and writer present in the first place. Partial record is set only in tls_push_sg() and tls_push_sg() will return an error immediately. All tls_device callers of tls_push_sg() will return (and not wait for memory) if it failed. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2019, 01:33:32 UTC
b081436 Tejun Heo 05 November 2019, 16:09:51 UTC blkcg: make blkcg_print_stat() print stats only for online blkgs blkcg_print_stat() iterates blkgs under RCU and doesn't test whether the blkg is online. This can call into pd_stat_fn() on a pd which is still being initialized leading to an oops. The heaviest operation - recursively summing up rwstat counters - is already done while holding the queue_lock. Expand queue_lock to cover the other operations and skip the blkg if it isn't online yet. The online state is protected by both blkcg and queue locks, so this guarantees that only online blkgs are processed. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Roman Gushchin <guro@fb.com> Cc: Josef Bacik <jbacik@fb.com> Fixes: 903d23f0a354 ("blk-cgroup: allow controllers to output their own stats") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Jens Axboe <axboe@kernel.dk> 07 November 2019, 00:08:38 UTC
105401b Rob Herring 01 November 2019, 15:37:54 UTC drm/shmem: Add docbook comments for drm_gem_shmem_object madvise fields Add missing docbook comments to madvise fields in struct drm_gem_shmem_object which fixes these warnings: include/drm/drm_gem_shmem_helper.h:87: warning: Function parameter or member 'madv' not described in 'drm_gem_shmem_object' include/drm/drm_gem_shmem_helper.h:87: warning: Function parameter or member 'madv_list' not described in 'drm_gem_shmem_object' Fixes: 17acb9f35ed7 ("drm/shmem: Add madvise state and purge helpers") Reported-by: Sean Paul <sean@poorly.run> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20191101153754.22803-1-robh@kernel.org 06 November 2019, 23:57:42 UTC
17fdd76 Vladimir Oltean 05 November 2019, 22:01:40 UTC net: mscc: ocelot: fix __ocelot_rmw_ix prototype The "read-modify-write register index" function is declared with a confusing prototype: the "mask" and "reg" arguments are swapped. Fortunately, this does not affect callers so far. Both arguments are u32, and the wrapper macros (ocelot_rmw_ix etc) have the arguments in the correct order (the one from ocelot_io.c). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 November 2019, 23:34:12 UTC
9f8f350 David S. Miller 06 November 2019, 23:16:17 UTC Merge branch 'Bonding-fixes-for-Ocelot-switch' Vladimir Oltean says: ==================== Bonding fixes for Ocelot switch This series fixes 2 issues with bonding in a system that integrates the ocelot driver, but the ports that are bonded do not actually belong to ocelot. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 06 November 2019, 23:16:17 UTC
3b3eed8 Claudiu Manoil 05 November 2019, 21:50:14 UTC net: mscc: ocelot: fix NULL pointer on LAG slave removal lag_upper_info may be NULL on slave removal. Fixes: dc96ee3730fc ("net: mscc: ocelot: add bonding support") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 November 2019, 23:16:17 UTC
7afb3e5 Claudiu Manoil 05 November 2019, 21:50:13 UTC net: mscc: ocelot: don't handle netdev events for other netdevs The check that the event is actually for this device should be moved from the "port" handler to the net device handler. Otherwise the port handler will deny bonding configuration for other net devices in the same system (like enetc in the LS1028A) that don't have the lag_upper_info->tx_type restriction that ocelot has. Fixes: dc96ee3730fc ("net: mscc: ocelot: add bonding support") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 06 November 2019, 23:16:17 UTC
950d3af Dmytro Linkin 29 October 2019, 09:44:24 UTC net/mlx5e: Use correct enum to determine uplink port For vlan push action, if eswitch flow source capability is enabled, flow source value compared with MLX5_VPORT_UPLINK enum, to determine uplink port. This lead to syndrome in dmesg if try to add vlan push action. For example: $ tc filter add dev vxlan0 ingress protocol ip prio 1 flower \ enc_dst_port 4789 \ action tunnel_key unset pipe \ action vlan push id 20 pipe \ action mirred egress redirect dev ens1f0_0 $ dmesg ... [ 2456.883693] mlx5_core 0000:82:00.0: mlx5_cmd_check:756:(pid 5273): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xa9c090) Use the correct enum value MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK. Fixes: bb204dcf39fe ("net/mlx5e: Determine source port properly for vlan push action") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 06 November 2019, 22:03:55 UTC
back to top