Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
d1c3ed6 Linus Torvalds 03 January 2013, 02:13:21 UTC Linux 3.8-rc2 03 January 2013, 02:13:21 UTC
d50403d Linus Torvalds 03 January 2013, 02:12:35 UTC Merge branch 'fixes-for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED fix from Bryan Wu. * 'fixes-for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: leds-gpio: set devm_gpio_request_one() flags param correctly 03 January 2013, 02:12:35 UTC
2d7c22f Javier Martinez Canillas 20 December 2012, 12:56:59 UTC leds: leds-gpio: set devm_gpio_request_one() flags param correctly commit a99d76f leds: leds-gpio: use gpio_request_one changed the leds-gpio driver to use gpio_request_one() instead of gpio_request() + gpio_direction_output() Unfortunately, it also made a semantic change that breaks the leds-gpio driver. The gpio_request_one() flags parameter was set to: GPIOF_DIR_OUT | (led_dat->active_low ^ state) Since GPIOF_DIR_OUT is 0, the final flags value will just be the XOR'ed value of led_dat->active_low and state. This value were used to distinguish between HIGH/LOW output initial level and call gpio_direction_output() accordingly. With this new semantic gpio_request_one() will take the flags value of 1 as a configuration of input direction (GPIOF_DIR_IN) and will call gpio_direction_input() instead of gpio_direction_output(). int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) { .. if (flags & GPIOF_DIR_IN) err = gpio_direction_input(gpio); else err = gpio_direction_output(gpio, (flags & GPIOF_INIT_HIGH) ? 1 : 0); .. } The right semantic is to evaluate led_dat->active_low ^ state and set the output initial level explicitly. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reported-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Bryan Wu <cooloney@gmail.com> 03 January 2013, 01:58:41 UTC
ef05e9b Linus Torvalds 03 January 2013, 01:46:14 UTC Merge git://www.linux-watchdog.org/linux-watchdog Pull watchdog fixes from Wim Van Sebroeck: "This fixes some small errors in the new da9055 driver, eliminates a compiler warning and adds DT support for the twl4030_wdt driver (so that we can have multiple watchdogs with DT on the omap platforms)." * git://www.linux-watchdog.org/linux-watchdog: watchdog: twl4030_wdt: add DT support watchdog: omap_wdt: eliminate unused variable and a compiler warning watchdog: da9055: Don't update wdt_dev->timeout in da9055_wdt_set_timeout error path watchdog: da9055: Fix invalid free of devm_ allocated data 03 January 2013, 01:46:14 UTC
080a62e Linus Torvalds 03 January 2013, 01:44:29 UTC Merge tag '3.8-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Some fixes for v3.8. They include a fix for the new SR-IOV sysfs management support, an expanded quirk for Ricoh SD card readers, a Stratus DMI quirk fix, and a PME polling fix." * tag '3.8-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz PCI/PM: Do not suspend port if any subordinate device needs PME polling PCI: Add PCIe Link Capability link speed and width names PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check) PCI: Remove spurious error for sriov_numvfs store and simplify flow 03 January 2013, 01:44:29 UTC
8a7eab2 David Howells 02 January 2013, 15:13:02 UTC UAPI: Strip _UAPI prefix on header install no matter the whitespace Commit 56c176c9cac9 ("UAPI: strip the _UAPI prefix from header guards during header installation") strips the _UAPI prefix from header guards, but only if there's a single space between the cpp directive and the label. Make it more flexible and able to handle tabs and multiple white space characters. Signed-off-by: David Howells <dhowell@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 January 2013, 01:36:10 UTC
3d33fcc David Howells 02 January 2013, 15:12:55 UTC UAPI: Remove empty Kbuild files Empty files can get deleted by the patch program, so remove empty Kbuild files and their links from the parent Kbuilds. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 January 2013, 01:36:10 UTC
007f6c3 Linus Torvalds 03 January 2013, 01:33:50 UTC Merge tag 'ecryptfs-3.8-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull ecryptfs fixes from Tyler Hicks: "Two self-explanatory fixes and a third patch which improves performance: when overwriting a full page in the eCryptfs page cache, skip reading in and decrypting the corresponding lower page." * tag 'ecryptfs-3.8-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: fs/ecryptfs/crypto.c: make ecryptfs_encode_for_filename() static eCryptfs: fix to use list_for_each_entry_safe() when delete items eCryptfs: Avoid unnecessary disk read and data decryption during writing 03 January 2013, 01:33:50 UTC
58890c0 Linus Torvalds 03 January 2013, 01:32:49 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "Two of Alex's patches deal with a race when reseting server connections for open RBD images, one demotes some non-fatal BUGs to WARNs, and my patch fixes a protocol feature bit failure path." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: fix protocol feature mismatch failure path libceph: WARN, don't BUG on unexpected connection states libceph: always reset osds when kicking libceph: move linger requests sooner in kick_requests() 03 January 2013, 01:32:49 UTC
42288fe Mel Gorman 21 December 2012, 23:10:25 UTC mm: mempolicy: Convert shared_policy mutex to spinlock Sasha was fuzzing with trinity and reported the following problem: BUG: sleeping function called from invalid context at kernel/mutex.c:269 in_atomic(): 1, irqs_disabled(): 0, pid: 6361, name: trinity-main 2 locks held by trinity-main/6361: #0: (&mm->mmap_sem){++++++}, at: [<ffffffff810aa314>] __do_page_fault+0x1e4/0x4f0 #1: (&(&mm->page_table_lock)->rlock){+.+...}, at: [<ffffffff8122f017>] handle_pte_fault+0x3f7/0x6a0 Pid: 6361, comm: trinity-main Tainted: G W 3.7.0-rc2-next-20121024-sasha-00001-gd95ef01-dirty #74 Call Trace: __might_sleep+0x1c3/0x1e0 mutex_lock_nested+0x29/0x50 mpol_shared_policy_lookup+0x2e/0x90 shmem_get_policy+0x2e/0x30 get_vma_policy+0x5a/0xa0 mpol_misplaced+0x41/0x1d0 handle_pte_fault+0x465/0x6a0 This was triggered by a different version of automatic NUMA balancing but in theory the current version is vunerable to the same problem. do_numa_page -> numa_migrate_prep -> mpol_misplaced -> get_vma_policy -> shmem_get_policy It's very unlikely this will happen as shared pages are not marked pte_numa -- see the page_mapcount() check in change_pte_range() -- but it is possible. To address this, this patch restores sp->lock as originally implemented by Kosaki Motohiro. In the path where get_vma_policy() is called, it should not be calling sp_alloc() so it is not necessary to treat the PTL specially. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 January 2013, 01:32:13 UTC
5439ca6 Linus Torvalds 02 January 2013, 17:57:34 UTC Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bug fixes from Ted Ts'o: "Various bug fixes for ext4. Perhaps the most serious bug fixed is one which could cause file system corruptions when performing file punch operations." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: avoid hang when mounting non-journal filesystems with orphan list ext4: lock i_mutex when truncating orphan inodes ext4: do not try to write superblock on ro remount w/o journal ext4: include journal blocks in df overhead calcs ext4: remove unaligned AIO warning printk ext4: fix an incorrect comment about i_mutex ext4: fix deadlock in journal_unmap_buffer() ext4: split off ext4_journalled_invalidatepage() jbd2: fix assertion failure in jbd2_journal_flush() ext4: check dioread_nolock on remount ext4: fix extent tree corruption caused by hole punch 02 January 2013, 17:57:34 UTC
a7a88b2 Hugh Dickins 02 January 2013, 10:04:23 UTC mempolicy: remove arg from mpol_parse_str, mpol_to_str Remove the unused argument (formerly no_context) from mpol_parse_str() and from mpol_to_str(). Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 January 2013, 17:27:10 UTC
f2a07f4 Hugh Dickins 02 January 2013, 10:01:33 UTC tmpfs mempolicy: fix /proc/mounts corrupting memory Recently I suggested using "mount -o remount,mpol=local /tmp" in NUMA mempolicy testing. Very nasty. Reading /proc/mounts, /proc/pid/mounts or /proc/pid/mountinfo may then corrupt one bit of kernel memory, often in a page table (causing "Bad swap" or "Bad page map" warning or "Bad pagetable" oops), sometimes in a vm_area_struct or rbnode or somewhere worse. "mpol=prefer" and "mpol=prefer:Node" are equally toxic. Recent NUMA enhancements are not to blame: this dates back to 2.6.35, when commit e17f74af351c "mempolicy: don't call mpol_set_nodemask() when no_context" skipped mpol_parse_str()'s call to mpol_set_nodemask(), which used to initialize v.preferred_node, or set MPOL_F_LOCAL in flags. With slab poisoning, you can then rely on mpol_to_str() to set the bit for node 0x6b6b, probably in the next page above the caller's stack. mpol_parse_str() is only called from shmem_parse_options(): no_context is always true, so call it unused for now, and remove !no_context code. Set v.nodes or v.preferred_node or MPOL_F_LOCAL as mpol_to_str() might expect. Then mpol_to_str() can ignore its no_context argument also, the mpol being appropriately initialized whether contextualized or not. Rename its no_context unused too, and let subsequent patch remove them (that's not needed for stable backporting, which would involve rejects). I don't understand why MPOL_LOCAL is described as a pseudo-policy: it's a reasonable policy which suffers from a confusing implementation in terms of MPOL_PREFERRED with MPOL_F_LOCAL. I believe this would be much more robust if MPOL_LOCAL were recognized in switch statements throughout, MPOL_F_LOCAL deleted, and MPOL_PREFERRED use the (possibly empty) nodes mask like everyone else, instead of its preferred_node variant (I presume an optimization from the days before MPOL_LOCAL). But that would take me too long to get right and fully tested. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 January 2013, 17:27:10 UTC
128dd17 Eric Wong 01 January 2013, 21:20:27 UTC epoll: prevent missed events on EPOLL_CTL_MOD EPOLL_CTL_MOD sets the interest mask before calling f_op->poll() to ensure events are not missed. Since the modifications to the interest mask are not protected by the same lock as ep_poll_callback, we need to ensure the change is visible to other CPUs calling ep_poll_callback. We also need to ensure f_op->poll() has an up-to-date view of past events which occured before we modified the interest mask. So this barrier also pairs with the barrier in wq_has_sleeper(). This should guarantee either ep_poll_callback or f_op->poll() (or both) will notice the readiness of a recently-ready/modified item. This issue was encountered by Andreas Voellmy and Junchang(Jason) Wang in: http://thread.gmane.org/gmane.linux.kernel/1408782/ Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Voellmy <andreas.voellmy@yale.edu> Tested-by: "Junchang(Jason) Wang" <junchang.wang@yale.edu> Cc: netdev@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 January 2013, 17:16:43 UTC
8899b8d Aaro Koskinen 23 December 2012, 20:03:37 UTC watchdog: twl4030_wdt: add DT support Add DT support for twl4030_wdt. This is needed to get twl4030_wdt to probe when booting with DT. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 02 January 2013, 11:07:05 UTC
412b372 Aaro Koskinen 23 December 2012, 20:03:36 UTC watchdog: omap_wdt: eliminate unused variable and a compiler warning We forgot to delete this in the commit 4f4753d9 (watchdog: omap_wdt: convert to devm_ functions), and as a result the following compilation warning was introduced: drivers/watchdog/omap_wdt.c: In function 'omap_wdt_remove': drivers/watchdog/omap_wdt.c:299:19: warning: unused variable 'res' [-Wunused-variable] Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 02 January 2013, 11:06:58 UTC
98e4a29 Axel Lin 22 December 2012, 03:07:01 UTC watchdog: da9055: Don't update wdt_dev->timeout in da9055_wdt_set_timeout error path Otherwise, WDIOC_GETTIMEOUT returns wrong value if set_timeout fails. This patch also removes unnecessary ret variable in da9055_wdt_ping function. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 02 January 2013, 11:06:49 UTC
ee8c94a Axel Lin 21 December 2012, 13:09:06 UTC watchdog: da9055: Fix invalid free of devm_ allocated data It is not required to free devm_ allocated data. Since kref_put needs a valid release function, da9055_wdt_release_resources() is not deleted. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 02 January 2013, 11:06:43 UTC
4a490b7 Linus Torvalds 30 December 2012, 18:00:37 UTC Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux Pull DRM update from Dave Airlie: "This is a bit larger due to me not bothering to do anything since before Xmas, and other people working too hard after I had clearly given up. It's got the 3 main x86 driver fixes pulls, and a bunch of tegra fixes, doesn't fix the Ironlake bug yet, but that does seem to be getting closer. - radeon: gpu reset fixes and userspace packet support - i915: watermark fixes, workarounds, i830/845 fix, - nouveau: nvd9/kepler microcode fixes, accel is now enabled and working, gk106 support - tegra: misc fixes." * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (34 commits) Revert "drm: tegra: protect DC register access with mutex" drm: tegra: program only one window during modeset drm: tegra: clean out old gem prototypes drm: tegra: remove redundant tegra2_tmds_config entry drm: tegra: protect DC register access with mutex drm: tegra: don't leave clients host1x member uninitialized drm: tegra: fix front_porch <-> back_porch mixup drm/nve0/graph: fix fuc, and enable acceleration on all known chipsets drm/nvc0/graph: fix fuc, and enable acceleration on GF119 drm/nouveau/bios: cache ramcfg strap on later chipsets drm/nouveau/mxm: silence output if no bios data drm/nouveau/bios: parse/display extra version component drm/nouveau/bios: implement opcode 0xa9 drm/nouveau/bios: update gpio parsing apis to match current design drm/nouveau: initial support for GK106 drm/radeon: add WAIT_UNTIL to evergreen VM safe reg list drm/i915: disable shrinker lock stealing for create_mmap_offset drm/i915: optionally disable shrinker lock stealing drm/i915: fix flags in dma buf exporting drm/radeon: add support for MEM_WRITE packet ... 30 December 2012, 18:00:37 UTC
8d91a42 Linus Torvalds 30 December 2012, 17:59:21 UTC Merge tag 'omap-late-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM cleanups for omap from Olof Johansson: "From Tony Lindgren: Here are few more patches to finish the omap changes for multiplatform conversion that are not strictly fixes, but were too complex to do with the dependencies during the merge window. Those are to move of serial-omap.h to platform_data, and the removal of remaining cpu_is_omap macro usage outside mach-omap2. Then there are several trivial fixes for typos and few minimal omap2plus_defconfig updates." * tag 'omap-late-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arch/arm/mach-omap2/dpll3xxx.c: drop if around WARN_ON OMAP2: Fix a typo - replace regist with register. ARM/omap: use module_platform_driver macro ARM: OMAP2+: PMU: Remove unused header ARM: OMAP4: remove duplicated include from omap_hwmod_44xx_data.c ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support ARM: OMAP2+: enable devtmpfs and devtmpfs automount ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER ARM: OMAP2+: Drop plat/cpu.h for omap2plus ARM: OMAP: Split fb.c to remove last remaining cpu_is_omap usage MAINTAINERS: Add an entry for omap related .dts files 30 December 2012, 17:59:21 UTC
4fe2dfa Linus Torvalds 30 December 2012, 17:58:36 UTC Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "It's been quiet over the holidays, but we have had a couple of trivial fixes coming in for the newly introduced sunxi platform; one to add it to the multiplatform defconfig for build coverage, and one fixup for device tree strings." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: sunxi: Change the machine compatible string. ARM: multi_v7_defconfig: Add ARCH_SUNXI 30 December 2012, 17:58:36 UTC
d5757db Dave Airlie 30 December 2012, 11:58:20 UTC Revert "drm: tegra: protect DC register access with mutex" This reverts commit 83c0bcb694be31dcd6c04bdd935b96a95a0af548. Lucas pointed out this was a mistake, and I missed the discussion, so just revert it out to save a rebase. Signed-off-by: Dave Airlie <airlied@redhat.com> 30 December 2012, 11:58:20 UTC
500df2e Lucas Stach 19 December 2012, 21:38:57 UTC drm: tegra: program only one window during modeset The intention is to program exactly WIN_A, not WIN_A and possibly others. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Dave Airlie <airlied@redhat.com> 30 December 2012, 04:01:35 UTC
e39250a Lucas Stach 19 December 2012, 21:38:56 UTC drm: tegra: clean out old gem prototypes There is no gem.c anymore, those functions are implemented by the drm_cma_helpers now. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Dave Airlie <airlied@redhat.com> 30 December 2012, 04:01:34 UTC
fa416dd Lucas Stach 19 December 2012, 21:38:55 UTC drm: tegra: remove redundant tegra2_tmds_config entry The 720p and 1080p entries are completely redundant, as we are matching the table entries against <=pclk. Also generalize the comment, as we are using those table entries even when driving other modes than the standard TV ones. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Dave Airlie <airlied@redhat.com> 30 December 2012, 04:01:33 UTC
83c0bcb Lucas Stach 19 December 2012, 21:38:54 UTC drm: tegra: protect DC register access with mutex Window properties are programmed through a shared aperture and have to happen atomically. Also we do the read-update-write dance on some of the shared regs. To make sure that different functions don't stumble over each other protect the register access with a mutex. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Dave Airlie <airlied@redhat.com> 30 December 2012, 04:01:33 UTC
4026bfb Lucas Stach 19 December 2012, 21:38:53 UTC drm: tegra: don't leave clients host1x member uninitialized No real problem for now, as nothing is using this, but leaving it unitialized is asking for trouble later on. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Dave Airlie <airlied@redhat.com> 30 December 2012, 04:01:32 UTC
4049508 Lucas Stach 19 December 2012, 21:38:52 UTC drm: tegra: fix front_porch <-> back_porch mixup Fixes wrong picture offset observed when using HDMI output with a Technisat HD TV. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Mark Zhang <markz@nvidia.com> Tested-by: Mark Zhang <markz@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 30 December 2012, 04:01:31 UTC
8be0e5c Dave Airlie 30 December 2012, 03:54:12 UTC Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-next Some fixes for 3.8: - Watermark fixups from Chris Wilson (4 pieces). - 2 snb workarounds, seem to be recently added to our internal DB. - workaround for the infamous i830/i845 hang, seems now finally solid! Based on Chris' fix for SNA, now also for UXA/mesa&old SNA. - Some more fixlets for shrinker-pulls-the-rug issues (Chris&me). - Fix dma-buf flags when exporting (you). - Disable the VGA plane if it's enabled on lid open - similar fix in spirit to the one I've sent you last weeek, BIOS' really like to mess with the display when closing the lid (awesome debug work from Krzysztof Mazur). * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: disable shrinker lock stealing for create_mmap_offset drm/i915: optionally disable shrinker lock stealing drm/i915: fix flags in dma buf exporting i915: ensure that VGA plane is disabled drm/i915: Preallocate the drm_mm_node prior to manipulating the GTT drm_mm manager drm: Export routines for inserting preallocated nodes into the mm manager drm/i915: don't disable disconnected outputs drm/i915: Implement workaround for broken CS tlb on i830/845 drm/i915: Implement WaSetupGtModeTdRowDispatch drm/i915: Implement WaDisableHiZPlanesWhenMSAAEnabled drm/i915: Prefer CRTC 'active' rather than 'enabled' during WM computations drm/i915: Clear self-refresh watermarks when disabled drm/i915: Double the cursor self-refresh latency on Valleyview drm/i915: Fixup cursor latency used for IVB lp3 watermarks 30 December 2012, 03:54:12 UTC
b1d778b Dave Airlie 30 December 2012, 03:02:48 UTC Merge branch 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux into drm-next Misc fixes for reset and new packets for userspace usage. * 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: add WAIT_UNTIL to evergreen VM safe reg list drm/radeon: add support for MEM_WRITE packet drm/radeon: restore modeset late in GPU reset path drm/radeon: avoid deadlock in pm path when waiting for fence drm/radeon: don't leave fence blocked process on failed GPU reset 30 December 2012, 03:02:48 UTC
344f906 Dave Airlie 30 December 2012, 03:01:52 UTC Merge branch 'drm-nouveau-fixes-3.8' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Fixes the accel support for nvd9 + kepler chipsets, also fixes GK106 support. * 'drm-nouveau-fixes-3.8' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nve0/graph: fix fuc, and enable acceleration on all known chipsets drm/nvc0/graph: fix fuc, and enable acceleration on GF119 drm/nouveau/bios: cache ramcfg strap on later chipsets drm/nouveau/mxm: silence output if no bios data drm/nouveau/bios: parse/display extra version component drm/nouveau/bios: implement opcode 0xa9 drm/nouveau/bios: update gpio parsing apis to match current design drm/nouveau: initial support for GK106 30 December 2012, 03:01:52 UTC
ecccd12 Zlatko Calusic 28 December 2012, 02:16:38 UTC mm: fix null pointer dereference in wait_iff_congested() An unintended consequence of commit 4ae0a48b5efc ("mm: modify pgdat_balanced() so that it also handles order-0") is that wait_iff_congested() can now be called with NULL 'struct zone *' producing kernel oops like this: BUG: unable to handle kernel NULL pointer dereference IP: [<ffffffff811542d9>] wait_iff_congested+0x59/0x140 This trivial patch fixes it. Reported-by: Zhouping Liu <zliu@redhat.com> Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Zlatko Calusic <zlatko.calusic@iskon.hr> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 December 2012, 16:42:39 UTC
2e37679 Olof Johansson 28 December 2012, 07:53:01 UTC Merge tag 'sunxi-fixes-for-3.8-rc2' of git://github.com/mripard/linux into fixes From Maxime Ripard: Fixes for the sunxi core to be merged in 3.8-rc2 * tag 'sunxi-fixes-for-3.8-rc2' of git://github.com/mripard/linux: sunxi: Change the machine compatible string. ARM: multi_v7_defconfig: Add ARCH_SUNXI 28 December 2012, 07:53:01 UTC
0fa6ebc Sage Weil 28 December 2012, 02:27:04 UTC libceph: fix protocol feature mismatch failure path We should not set con->state to CLOSED here; that happens in ceph_fault() in the caller, where it first asserts that the state is not yet CLOSED. Avoids a BUG when the features don't match. Since the fail_protocol() has become a trivial wrapper, replace calls to it with direct calls to reset_connection(). Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com> 28 December 2012, 02:27:04 UTC
122070a Alex Elder 26 December 2012, 16:43:57 UTC libceph: WARN, don't BUG on unexpected connection states A number of assertions in the ceph messenger are implemented with BUG_ON(), killing the system if connection's state doesn't match what's expected. At this point our state model is (evidently) not well understood enough for these assertions to trigger a BUG(). Convert all BUG_ON(con->state...) calls to be WARN_ON(con->state...) so we learn about these issues without killing the machine. We now recognize that a connection fault can occur due to a socket closure at any time, regardless of the state of the connection. So there is really nothing we can assert about the state of the connection at that point so eliminate that assertion. Reported-by: Ugis <ugis22@gmail.com> Tested-by: Ugis <ugis22@gmail.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> 28 December 2012, 02:27:04 UTC
e6d50f6 Alex Elder 26 December 2012, 20:31:40 UTC libceph: always reset osds when kicking When ceph_osdc_handle_map() is called to process a new osd map, kick_requests() is called to ensure all affected requests are updated if necessary to reflect changes in the osd map. This happens in two cases: whenever an incremental map update is processed; and when a full map update (or the last one if there is more than one) gets processed. In the former case, the kick_requests() call is followed immediately by a call to reset_changed_osds() to ensure any connections to osds affected by the map change are reset. But for full map updates this isn't done. Both cases should be doing this osd reset. Rather than duplicating the reset_changed_osds() call, move it into the end of kick_requests(). Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> 28 December 2012, 02:27:04 UTC
ab60b16 Alex Elder 19 December 2012, 21:52:36 UTC libceph: move linger requests sooner in kick_requests() The kick_requests() function is called by ceph_osdc_handle_map() when an osd map change has been indicated. Its purpose is to re-queue any request whose target osd is different from what it was when it was originally sent. It is structured as two loops, one for incomplete but registered requests, and a second for handling completed linger requests. As a special case, in the first loop if a request marked to linger has not yet completed, it is moved from the request list to the linger list. This is as a quick and dirty way to have the second loop handle sending the request along with all the other linger requests. Because of the way it's done now, however, this quick and dirty solution can result in these incomplete linger requests never getting re-sent as desired. The problem lies in the fact that the second loop only arranges for a linger request to be sent if it appears its target osd has changed. This is the proper handling for *completed* linger requests (it avoids issuing the same linger request twice to the same osd). But although the linger requests added to the list in the first loop may have been sent, they have not yet completed, so they need to be re-sent regardless of whether their target osd has changed. The first required fix is we need to avoid calling __map_request() on any incomplete linger request. Otherwise the subsequent __map_request() call in the second loop will find the target osd has not changed and will therefore not re-send the request. Second, we need to be sure that a sent but incomplete linger request gets re-sent. If the target osd is the same with the new osd map as it was when the request was originally sent, this won't happen. This can be fixed through careful handling when we move these requests from the request list to the linger list, by unregistering the request *before* it is registered as a linger request. This works because a side-effect of unregistering the request is to make the request's r_osd pointer be NULL, and *that* will ensure the second loop actually re-sends the linger request. Processing of such a request is done at that point, so continue with the next one once it's been moved. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com> 28 December 2012, 02:27:04 UTC
101e5c7 Linus Torvalds 27 December 2012, 18:46:47 UTC Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Report i2c errors to userspace in lm73 driver - Fix problem with DIV_ROUND_CLOSEST and unsigned divisors in emc6w201 driver * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (emc6w201) Fix DIV_ROUND_CLOSEST problem with unsigned divisors hwmon: (lm73} Detect and report i2c bus errors 27 December 2012, 18:46:47 UTC
ddf75ae Linus Torvalds 27 December 2012, 18:42:46 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace fixes from Eric Biederman: "This tree includes two bug fixes for problems Oleg spotted on his review of the recent pid namespace work. A small fix to not enable bottom halves with irqs disabled, and a trivial build fix for f2fs with user namespaces enabled." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: f2fs: Don't assign e_id in f2fs_acl_from_disk proc: Allow proc_free_inum to be called from any context pidns: Stop pid allocation when init dies pidns: Outlaw thread creation after unshare(CLONE_NEWPID) 27 December 2012, 18:42:46 UTC
7fd83b4 Linus Torvalds 27 December 2012, 18:40:30 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) GRE tunnel drivers don't set the transport header properly, they also blindly deref the inner protocol ipv4 and needs some checks. Fixes from Isaku Yamahata. 2) Fix sleeps while atomic in netdevice rename code, from Eric Dumazet. 3) Fix double-spinlock in solos-pci driver, from Dan Carpenter. 4) More ARP bug fixes. Fix lockdep splat in arp_solicit() and then the bug accidentally added by that fix. From Eric Dumazet and Cong Wang. 5) Remove some __dev* annotations that slipped back in, as well as all HOTPLUG references. From Greg KH 6) RDS protocol uses wrong interfaces to access scatter-gather elements, causing a regression. From Mike Marciniszyn. 7) Fix build error in cpts driver, from Richard Cochran. 8) Fix arithmetic in packet scheduler, from Stefan Hasko. 9) Similarly, fix association during calculation of random backoff in batman-adv. From Akinobu Mita. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) ipv6/ip6_gre: set transport header correctly ipv4/ip_gre: set transport header correctly to gre header IB/rds: suppress incompatible protocol when version is known IB/rds: Correct ib_api use with gs_dma_address/sg_dma_len net/vxlan: Use the underlying device index when joining/leaving multicast groups tcp: should drop incoming frames without ACK flag set netprio_cgroup: define sk_cgrp_prioidx only if NETPRIO_CGROUP is enabled cpts: fix a run time warn_on. cpts: fix build error by removing useless code. batman-adv: fix random jitter calculation arp: fix a regression in arp_solicit() net: sched: integer overflow fix CONFIG_HOTPLUG removal from networking core Drivers: network: more __dev* removal bridge: call br_netpoll_disable in br_add_if ipv4: arp: fix a lockdep splat in arp_solicit() tuntap: dont use a private kmem_cache net: devnet_rename_seq should be a seqcount ip_gre: fix possible use after free ip_gre: make ipgre_tunnel_xmit() not parse network header as IP unconditionally ... 27 December 2012, 18:40:30 UTC
0e9a9a1 Theodore Ts'o 27 December 2012, 06:42:50 UTC ext4: avoid hang when mounting non-journal filesystems with orphan list When trying to mount a file system which does not contain a journal, but which does have a orphan list containing an inode which needs to be truncated, the mount call with hang forever in ext4_orphan_cleanup() because ext4_orphan_del() will return immediately without removing the inode from the orphan list, leading to an uninterruptible loop in kernel code which will busy out one of the CPU's on the system. This can be trivially reproduced by trying to mount the file system found in tests/f_orphan_extents_inode/image.gz from the e2fsprogs source tree. If a malicious user were to put this on a USB stick, and mount it on a Linux desktop which has automatic mounts enabled, this could be considered a potential denial of service attack. (Not a big deal in practice, but professional paranoids worry about such things, and have even been known to allocate CVE numbers for such problems.) Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Cc: stable@vger.kernel.org 27 December 2012, 06:42:50 UTC
721e3eb Theodore Ts'o 27 December 2012, 06:42:48 UTC ext4: lock i_mutex when truncating orphan inodes Commit c278531d39 added a warning when ext4_flush_unwritten_io() is called without i_mutex being taken. It had previously not been taken during orphan cleanup since races weren't possible at that point in the mount process, but as a result of this c278531d39, we will now see a kernel WARN_ON in this case. Take the i_mutex in ext4_orphan_cleanup() to suppress this warning. Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Cc: stable@vger.kernel.org 27 December 2012, 06:42:48 UTC
ae782bb Isaku Yamahata 24 December 2012, 16:51:04 UTC ipv6/ip6_gre: set transport header correctly ip6gre_xmit2() incorrectly sets transport header to inner payload instead of GRE header. It seems copy-and-pasted from ipip.c. Set transport header to gre header. (In ipip case the transport header is the inner ip header, so that's correct.) Found by inspection. In practice the incorrect transport header doesn't matter because the skb usually is sent to another net_device or socket, so the transport header isn't referenced. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2012, 23:19:56 UTC
861aa6d Isaku Yamahata 24 December 2012, 16:51:03 UTC ipv4/ip_gre: set transport header correctly to gre header ipgre_tunnel_xmit() incorrectly sets transport header to inner payload instead of GRE header. It seems copy-and-pasted from ipip.c. So set transport header to gre header. (In ipip case the transport header is the inner ip header, so that's correct.) Found by inspection. In practice the incorrect transport header doesn't matter because the skb usually is sent to another net_device or socket, so the transport header isn't referenced. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2012, 23:19:56 UTC
a496759 Marciniszyn, Mike 21 December 2012, 08:01:54 UTC IB/rds: suppress incompatible protocol when version is known Add an else to only print the incompatible protocol message when version hasn't been established. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2012, 23:17:37 UTC
f2e9bd7 Marciniszyn, Mike 21 December 2012, 08:01:49 UTC IB/rds: Correct ib_api use with gs_dma_address/sg_dma_len 0b088e00 ("RDS: Use page_remainder_alloc() for recv bufs") added uses of sg_dma_len() and sg_dma_address(). This makes RDS DOA with the qib driver. IB ulps should use ib_sg_dma_len() and ib_sg_dma_address respectively since some HCAs overload ib_sg_dma* operations. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2012, 23:17:37 UTC
af9b078 Yan Burman 20 December 2012, 03:36:08 UTC net/vxlan: Use the underlying device index when joining/leaving multicast groups The socket calls from vxlan to join/leave multicast group aren't using the index of the underlying device, as a result the stack uses the first interface that is up. This results in vxlan being non functional over a device which isn't the 1st to be up. Fix this by providing the iflink field to the vxlan instance to the multicast calls. Signed-off-by: Yan Burman <yanb@mellanox.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2012, 23:09:55 UTC
c3ae62a Eric Dumazet 26 December 2012, 12:44:34 UTC tcp: should drop incoming frames without ACK flag set In commit 96e0bf4b5193d (tcp: Discard segments that ack data not yet sent) John Dykstra enforced a check against ack sequences. In commit 354e4aa391ed5 (tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation) I added more safety tests. But we missed fact that these tests are not performed if ACK bit is not set. RFC 793 3.9 mandates TCP should drop a frame without ACK flag set. " fifth check the ACK field, if the ACK bit is off drop the segment and return" Not doing so permits an attacker to only guess an acceptable sequence number, evading stronger checks. Many thanks to Zhiyun Qian for bringing this issue to our attention. See : http://web.eecs.umich.edu/~zhiyunq/pub/ccs12_TCP_sequence_number_inference.pdf Reported-by: Zhiyun Qian <zhiyunq@umich.edu> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: John Dykstra <john.dykstra1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2012, 23:08:55 UTC
ad4b3fb Christoffer Dall 21 December 2012, 18:03:50 UTC mm: Fix PageHead when !CONFIG_PAGEFLAGS_EXTENDED Unfortunately with !CONFIG_PAGEFLAGS_EXTENDED, (!PageHead) is false, and (PageHead) is true, for tail pages. If this is indeed the intended behavior, which I doubt because it breaks cache cleaning on some ARM systems, then the nomenclature is highly problematic. This patch makes sure PageHead is only true for head pages and PageTail is only true for tail pages, and neither is true for non-compound pages. [ This buglet seems ancient - seems to have been introduced back in Apr 2008 in commit 6a1e7f777f61: "pageflags: convert to the use of new macros". And the reason nobody noticed is because the PageHead() tests are almost all about just sanity-checking, and only used on pages that are actual page heads. The fact that the old code returned true for tail pages too was thus not really noticeable. - Linus ] Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Will Deacon <Will.Deacon@arm.com> Cc: Steve Capper <Steve.Capper@arm.com> Cc: Christoph Lameter <cl@linux.com> Cc: stable@kernel.org # 2.6.26+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 26 December 2012, 22:57:34 UTC
3d0dcfb Li Zefan 25 December 2012, 20:48:24 UTC netprio_cgroup: define sk_cgrp_prioidx only if NETPRIO_CGROUP is enabled sock->sk_cgrp_prioidx won't be used at all if CONFIG_NETPRIO_CGROUP=n. Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2012, 22:16:23 UTC
ccb6e98 Richard Cochran 23 December 2012, 21:19:10 UTC cpts: fix a run time warn_on. This patch fixes a warning in clk_enable by calling clk_prepare_enable instead. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2012, 22:15:09 UTC
cbc44db Richard Cochran 23 December 2012, 21:19:09 UTC cpts: fix build error by removing useless code. The cpts driver tries to obtain the input clock frequency by calling the clock's internal 'recalc' method. Since <plat/clock.h> has been removed, this code can no longer compile. However, the driver never makes use of the frequency value, so this patch fixes the issue by removing the offending code altogether. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2012, 22:15:09 UTC
143cdd8 Akinobu Mita 26 December 2012, 02:32:10 UTC batman-adv: fix random jitter calculation batadv_iv_ogm_emit_send_time() attempts to calculates a random integer in the range of 'orig_interval +- BATADV_JITTER' by the below lines. msecs = atomic_read(&bat_priv->orig_interval) - BATADV_JITTER; msecs += (random32() % 2 * BATADV_JITTER); But it actually gets 'orig_interval' or 'orig_interval - BATADV_JITTER' because '%' and '*' have same precedence and associativity is left-to-right. This adds the parentheses at the appropriate position so that it matches original intension. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Antonio Quartulli <ordex@autistici.org> Cc: Marek Lindner <lindner_marek@yahoo.de> Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Cc: Antonio Quartulli <ordex@autistici.org> Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> 26 December 2012, 22:13:23 UTC
812089e Andy Lutomirski 01 December 2012, 20:37:20 UTC PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz Otherwise it fails like this on cards like the Transcend 16GB SDHC card: mmc0: new SDHC card at address b368 mmcblk0: mmc0:b368 SDC 15.0 GiB mmcblk0: error -110 sending status command, retrying mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb0 Tested on my Lenovo x200 laptop. [bhelgaas: changelog] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Chris Ball <cjb@laptop.org> CC: Manoj Iyer <manoj.iyer@canonical.com> CC: stable@vger.kernel.org 26 December 2012, 17:43:06 UTC
c733b77 Huang Ying 26 December 2012, 17:39:23 UTC PCI/PM: Do not suspend port if any subordinate device needs PME polling Ulrich reported that his USB3 cardreader does not work reliably when connected to the USB3 port. It turns out that USB3 controller failed to awaken when plugging in the USB3 cardreader. Further experiments found that the USB3 host controller can only be awakened via polling, not via PME interrupt. But if the PCIe port to which the USB3 host controller is connected is suspended, we cannot poll the controller because its config space is not accessible when the PCIe port is in a low power state. To solve the issue, the PCIe port will not be suspended if any subordinate device needs PME polling. [bhelgaas: use bool consistently rather than mixing int/bool] Reference: http://lkml.kernel.org/r/50841CCC.9030809@uli-eckhardt.de Reported-by: Ulrich Eckhardt <usb@uli-eckhardt.de> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+ 26 December 2012, 17:39:23 UTC
130f1b8 Bjorn Helgaas 26 December 2012, 17:39:23 UTC PCI: Add PCIe Link Capability link speed and width names Add standard #defines for the Supported Link Speeds field in the PCIe Link Capabilities register. Note that prior to PCIe spec r3.0, these encodings were defined: 0001b 2.5GT/s Link speed supported 0010b 5.0GT/s and 2.5GT/s Link speed supported Starting with spec r3.0, these encodings refer to bits 0 and 1 in the Supported Link Speeds Vector in the Link Capabilities 2 register, and bits 0 and 1 there mean 2.5 GT/s and 5.0 GT/s, respectively. Therefore, code that followed r2.0 and interpreted 0x1 as 2.5GT/s and 0x2 as 5.0GT/s will continue to work, and we can identify a device using the new encodings because it will have a non-zero Link Capabilities 2 register. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 26 December 2012, 17:39:23 UTC
1278998 Myron Stowe 26 December 2012, 17:39:23 UTC PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check) Commit 284f5f9 was intended to disable the "only_one_child()" optimization on Stratus ftServer systems, but its DMI check is wrong. It looks for DMI_SYS_VENDOR that contains "ftServer", when it should look for DMI_SYS_VENDOR containing "Stratus" and DMI_PRODUCT_NAME containing "ftServer". Tested on Stratus ftServer 6400. Reported-by: Fadeeva Marina <astarta@rat.ru> Reference: https://bugzilla.kernel.org/show_bug.cgi?id=51331 Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.5+ 26 December 2012, 17:39:23 UTC
faa48a5 Bjorn Helgaas 26 December 2012, 17:39:22 UTC PCI: Remove spurious error for sriov_numvfs store and simplify flow If we request "num_vfs" and the driver's sriov_configure() method enables exactly that number ("num_vfs_enabled"), we complain "Invalid value for number of VFs to enable" and return an error. We should silently return success instead. Also, use kstrtou16() since numVFs is defined to be a 16-bit field and rework to simplify control flow. Reported-by: Greg Rose <gregory.v.rose@intel.com> Reference: http://lkml.kernel.org/r/20121214101911.00002f59@unknown Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Donald Dutile <ddutile@redhat.com> 26 December 2012, 17:39:22 UTC
48c6d12 Eric W. Biederman 22 December 2012, 09:52:39 UTC f2fs: Don't assign e_id in f2fs_acl_from_disk With user namespaces enabled building f2fs fails with: CC fs/f2fs/acl.o fs/f2fs/acl.c: In function ‘f2fs_acl_from_disk’: fs/f2fs/acl.c:85:21: error: ‘struct posix_acl_entry’ has no member named ‘e_id’ make[2]: *** [fs/f2fs/acl.o] Error 1 make[2]: Target `__build' not remade because of errors. e_id is a backwards compatibility field only used for file systems that haven't been converted to use kuids and kgids. When the posix acl tag field is neither ACL_USER nor ACL_GROUP assigning e_id is unnecessary. Remove the assignment so f2fs will build with user namespaces enabled. Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Amit Sahrawat <a.sahrawat@samsung.com> Acked-by: Jaegeuk Kim <jaegeuk.kim@samsung.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 26 December 2012, 04:05:15 UTC
dfb2ea4 Eric W. Biederman 22 December 2012, 04:38:00 UTC proc: Allow proc_free_inum to be called from any context While testing the pid namespace code I hit this nasty warning. [ 176.262617] ------------[ cut here ]------------ [ 176.263388] WARNING: at /home/eric/projects/linux/linux-userns-devel/kernel/softirq.c:160 local_bh_enable_ip+0x7a/0xa0() [ 176.265145] Hardware name: Bochs [ 176.265677] Modules linked in: [ 176.266341] Pid: 742, comm: bash Not tainted 3.7.0userns+ #18 [ 176.266564] Call Trace: [ 176.266564] [<ffffffff810a539f>] warn_slowpath_common+0x7f/0xc0 [ 176.266564] [<ffffffff810a53fa>] warn_slowpath_null+0x1a/0x20 [ 176.266564] [<ffffffff810ad9ea>] local_bh_enable_ip+0x7a/0xa0 [ 176.266564] [<ffffffff819308c9>] _raw_spin_unlock_bh+0x19/0x20 [ 176.266564] [<ffffffff8123dbda>] proc_free_inum+0x3a/0x50 [ 176.266564] [<ffffffff8111d0dc>] free_pid_ns+0x1c/0x80 [ 176.266564] [<ffffffff8111d195>] put_pid_ns+0x35/0x50 [ 176.266564] [<ffffffff810c608a>] put_pid+0x4a/0x60 [ 176.266564] [<ffffffff8146b177>] tty_ioctl+0x717/0xc10 [ 176.266564] [<ffffffff810aa4d5>] ? wait_consider_task+0x855/0xb90 [ 176.266564] [<ffffffff81086bf9>] ? default_spin_lock_flags+0x9/0x10 [ 176.266564] [<ffffffff810cab0a>] ? remove_wait_queue+0x5a/0x70 [ 176.266564] [<ffffffff811e37e8>] do_vfs_ioctl+0x98/0x550 [ 176.266564] [<ffffffff810b8a0f>] ? recalc_sigpending+0x1f/0x60 [ 176.266564] [<ffffffff810b9127>] ? __set_task_blocked+0x37/0x80 [ 176.266564] [<ffffffff810ab95b>] ? sys_wait4+0xab/0xf0 [ 176.266564] [<ffffffff811e3d31>] sys_ioctl+0x91/0xb0 [ 176.266564] [<ffffffff810a95f0>] ? task_stopped_code+0x50/0x50 [ 176.266564] [<ffffffff81939199>] system_call_fastpath+0x16/0x1b [ 176.266564] ---[ end trace 387af88219ad6143 ]--- It turns out that spin_unlock_bh(proc_inum_lock) is not safe when put_pid is called with another spinlock held and irqs disabled. For now take the easy path and use spin_lock_irqsave(proc_inum_lock) in proc_free_inum and spin_loc_irq in proc_alloc_inum(proc_inum_lock). Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 26 December 2012, 00:23:12 UTC
c876ad7 Eric W. Biederman 22 December 2012, 04:27:12 UTC pidns: Stop pid allocation when init dies Oleg pointed out that in a pid namespace the sequence. - pid 1 becomes a zombie - setns(thepidns), fork,... - reaping pid 1. - The injected processes exiting. Can lead to processes attempting access their child reaper and instead following a stale pointer. That waitpid for init can return before all of the processes in the pid namespace have exited is also unfortunate. Avoid these problems by disabling the allocation of new pids in a pid namespace when init dies, instead of when the last process in a pid namespace is reaped. Pointed-out-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 26 December 2012, 00:10:05 UTC
d096ad0 Michael Tokarev 25 December 2012, 19:08:16 UTC ext4: do not try to write superblock on ro remount w/o journal When a journal-less ext4 filesystem is mounted on a read-only block device (blockdev --setro will do), each remount (for other, unrelated, flags, like suid=>nosuid etc) results in a series of scary messages from kernel telling about I/O errors on the device. This is becauese of the following code ext4_remount(): if (sbi->s_journal == NULL) ext4_commit_super(sb, 1); at the end of remount procedure, which forces writing (flushing) of a superblock regardless whenever it is dirty or not, if the filesystem is readonly or not, and whenever the device itself is readonly or not. We only need call ext4_commit_super when the file system had been previously mounted read/write. Thanks to Eric Sandeen for help in diagnosing this issue. Signed-off-By: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org 25 December 2012, 19:08:16 UTC
0875a2b Eric Sandeen 25 December 2012, 18:56:01 UTC ext4: include journal blocks in df overhead calcs To more accurately calculate overhead for "bsd" style df reporting, we should count the journal blocks as overhead as well. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Tested-by: Eric Whitney <enwlinux@gmail.com> 25 December 2012, 18:56:01 UTC
a28a917 Eric Sandeen 25 December 2012, 18:33:13 UTC ext4: remove unaligned AIO warning printk Although I put this in, I now think it was a bad decision. For most users, there is very little to be done in this case. They get the message, once per day, with no real context or proposed action. TBH, it generates support calls when it probably does not need to; the message sounds more dire than the situation really is. Just nuke it. Normal investigation via blktrace or whatnot can reveal poor IO patterns if bad performance is encountered. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> 25 December 2012, 18:33:13 UTC
ad96f71 Andy Lutomirski 25 December 2012, 18:31:52 UTC ext4: fix an incorrect comment about i_mutex i_mutex is not held when ->sync_file is called. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> 25 December 2012, 18:31:52 UTC
53e8726 Jan Kara 25 December 2012, 18:29:52 UTC ext4: fix deadlock in journal_unmap_buffer() We cannot wait for transaction commit in journal_unmap_buffer() because we hold page lock which ranks below transaction start. We solve the issue by bailing out of journal_unmap_buffer() and jbd2_journal_invalidatepage() with -EBUSY. Caller is then responsible for waiting for transaction commit to finish and try invalidation again. Since the issue can happen only for page stradding i_size, it is simple enough to manually call jbd2_journal_invalidatepage() for such page from ext4_setattr(), check the return value and wait if necessary. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> 25 December 2012, 18:29:52 UTC
4520fb3 Jan Kara 25 December 2012, 18:28:54 UTC ext4: split off ext4_journalled_invalidatepage() In data=journal mode we don't need delalloc or DIO handling in invalidatepage and similarly in other modes we don't need the journal handling. So split invalidatepage implementations. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> 25 December 2012, 18:28:54 UTC
8382fca Eric W. Biederman 21 December 2012, 03:26:06 UTC pidns: Outlaw thread creation after unshare(CLONE_NEWPID) The sequence: unshare(CLONE_NEWPID) clone(CLONE_THREAD|CLONE_SIGHAND|CLONE_VM) Creates a new process in the new pid namespace without setting pid_ns->child_reaper. After forking this results in a NULL pointer dereference. Avoid this and other nonsense scenarios that can show up after creating a new pid namespace with unshare by adding a new check in copy_prodcess. Pointed-out-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 25 December 2012, 06:53:14 UTC
cf0be88 Cong Wang 23 December 2012, 15:23:16 UTC arp: fix a regression in arp_solicit() Sedat reported the following commit caused a regression: commit 9650388b5c56578fdccc79c57a8c82fb92b8e7f1 Author: Eric Dumazet <edumazet@google.com> Date: Fri Dec 21 07:32:10 2012 +0000 ipv4: arp: fix a lockdep splat in arp_solicit This is due to the 6th parameter of arp_send() needs to be NULL for the broadcast case, the above commit changed it to an all-zero array by mistake. Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 25 December 2012, 02:42:58 UTC
637704c Linus Torvalds 23 December 2012, 17:48:33 UTC Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux Pull i2c __dev* attribute removal from Wolfram Sang: "The squashed patches from Bill to get rid of the __dev* annotations in the i2c subsystem. I couldn't include it in my previous pull request due to some dependency with the mfd subsystem. I had this patch in linux-next for two days before rc1 and nothing popped up." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: i2c: remove __dev* attributes from subsystem 23 December 2012, 17:48:33 UTC
4ae0a48 Zlatko Calusic 23 December 2012, 14:12:54 UTC mm: modify pgdat_balanced() so that it also handles order-0 Teach pgdat_balanced() about order-0 allocations so that we can simplify code in a few places in vmstat.c. Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Zlatko Calusic <zlatko.calusic@iskon.hr> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 December 2012, 17:46:36 UTC
9c016d6 Rafael J. Wysocki 23 December 2012, 13:39:32 UTC Partly revert "[media] uvcvideo: Set error_idx properly for extended controls API failures" Commit f0ed2ce840b3 ("[media] uvcvideo: Set error_idx properly for extended controls API failures") causes user space to behave incorrectly on one of my test machines (there is no sound under KDE 4.9.4 using pulseaudio and there is a knotify4 process occupying one of the CPU cores 100% of the time). Reverting that commit entirely fixes the problem for me. However, commit f0ed2ce840b3 appears to do more than it follows from its changelog, because the changelog only says about the changes related to ctrls->error_idx, while the commit additionally changes error codes returned by various functions in uvc_ctrl.c and uvc_v4l2.c. It turns out that the changes of the returned error codes confuse the user spce, so it is sufficient to revert the part of commit f0ed2ce840b3 not mentioned in its changelog to fix the problem. [ 'ENOENT' is not a valid error return from an ioctl to begin with, and I don't understand how anybody ever even thought it would be. - Linus ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 December 2012, 17:39:14 UTC
43880f7 Maxime Ripard 18 December 2012, 14:17:12 UTC sunxi: Change the machine compatible string. Commit 68136b10 ("ARM: sunxi: Change device tree naming scheme for sunxi") changed the naming scheme and the compatible strings used in the device trees related to the sunXi platform, but forgot to change the compatible string in the DT machine definition. This prevents the kernel from booting on these boards. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> 23 December 2012, 17:20:15 UTC
7712866 Maxime Ripard 21 November 2012, 09:57:49 UTC ARM: multi_v7_defconfig: Add ARCH_SUNXI Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> 23 December 2012, 17:20:11 UTC
eca1529 Ben Skeggs 20 December 2012, 02:52:06 UTC drm/nve0/graph: fix fuc, and enable acceleration on all known chipsets Also adds GK106 to chipsets known by ucode. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 23 December 2012, 12:59:32 UTC
9025306 Ben Skeggs 20 December 2012, 02:50:52 UTC drm/nvc0/graph: fix fuc, and enable acceleration on GF119 Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 23 December 2012, 12:59:31 UTC
5ddf4d4 Ben Skeggs 19 December 2012, 21:48:51 UTC drm/nouveau/bios: cache ramcfg strap on later chipsets This fixes suspend/resume on at least Quadro 400. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 23 December 2012, 12:59:30 UTC
3d8ec27 Ben Skeggs 11 December 2012, 03:32:59 UTC drm/nouveau/mxm: silence output if no bios data Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 23 December 2012, 12:59:29 UTC
0dd660d Ben Skeggs 11 December 2012, 02:49:18 UTC drm/nouveau/bios: parse/display extra version component Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 23 December 2012, 12:59:28 UTC
1ed7316 Ben Skeggs 07 December 2012, 03:46:52 UTC drm/nouveau/bios: implement opcode 0xa9 Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 23 December 2012, 12:59:28 UTC
d2bcea6 Ben Skeggs 07 December 2012, 00:09:17 UTC drm/nouveau/bios: update gpio parsing apis to match current design Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 23 December 2012, 12:59:27 UTC
caba557 Ben Skeggs 06 December 2012, 04:45:57 UTC drm/nouveau: initial support for GK106 Modesetting seems to work alright, as does graphics (using binary driver fuc from nve7...). Lots to be done no doubt, but this'll get an image on the screen for people. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> 23 December 2012, 12:59:26 UTC
0b255e9 Bill Pemberton 27 November 2012, 20:59:38 UTC i2c: remove __dev* attributes from subsystem CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> (for ocores and mux-gpio) Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> (for i2c-gpio) Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> (for puf3) Acked-by: Barry Song <baohua.song@csr.com> (for sirf) Reviewed-by: Jean Delvare <khali@linux-fr.org> [wsa: Fixed "foo* bar" flaws while we are here] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> 22 December 2012, 19:13:45 UTC
86266ca Guenter Roeck 19 December 2012, 02:16:08 UTC hwmon: (emc6w201) Fix DIV_ROUND_CLOSEST problem with unsigned divisors Result of DIV_ROUND_CLOSEST is undefined for negative dividends if the divisor variable type is unsigned. Fix by declaring divisor as signed variable. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> 22 December 2012, 10:16:40 UTC
d2fe85d Stefan Hasko 21 December 2012, 15:04:59 UTC net: sched: integer overflow fix Fixed integer overflow in function htb_dequeue Signed-off-by: Stefan Hasko <hasko.stevo@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 22 December 2012, 08:03:00 UTC
8baf82b Greg KH 21 December 2012, 13:44:29 UTC CONFIG_HOTPLUG removal from networking core CONFIG_HOTPLUG is always enabled now, so remove the unused code that was trying to be compiled out when this option was disabled, in the networking core. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> 22 December 2012, 08:03:00 UTC
03ce758 Greg KH 21 December 2012, 13:42:15 UTC Drivers: network: more __dev* removal Remove some __dev* markings that snuck in the 3.8-rc1 merge window in the drivers/net/* directory. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> 22 December 2012, 08:03:00 UTC
0602934 Chris Verges 21 December 2012, 09:58:34 UTC hwmon: (lm73} Detect and report i2c bus errors If an LM73 device does not exist on an I2C bus, attempts to communicate with the device result in an error code returned from the i2c read/write functions. The current lm73 driver casts that return value from a s32 type to a s16 type, then converts it to a temperature in celsius. Because negative temperatures are valid, it is difficult to distinguish between an error code printed to the response buffer and a negative temperature recorded by the sensor. The solution is to evaluate the return value from the i2c functions before performing any temperature calculations. If the i2c function did not succeed, the error code should be passed back through the virtual file system layer instead of being printed into the response buffer. Before: $ cat /sys/class/hwmon/hwmon0/device/temp1_input -46 After: $ cat /sys/class/hwmon/hwmon0/device/temp1_input cat: read error: No such device or address Signed-off-by: Chris Verges <kg4ysn@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> 22 December 2012, 01:59:30 UTC
a49f0d1 Linus Torvalds 22 December 2012, 01:19:00 UTC Linux 3.8-rc1 22 December 2012, 01:19:00 UTC
4fe19a1 Linus Torvalds 22 December 2012, 01:10:29 UTC Merge git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: "This includes some fixes and code improvements (like clk_prepare_enable and clk_disable_unprepare), conversion from the omap_wdt and twl4030_wdt drivers to the watchdog framework, addition of the SB8x0 chipset support and the DA9055 Watchdog driver and some OF support for the davinci_wdt driver." * git://www.linux-watchdog.org/linux-watchdog: (22 commits) watchdog: mei: avoid oops in watchdog unregister code path watchdog: Orion: Fix possible null-deference in orion_wdt_probe watchdog: sp5100_tco: Add SB8x0 chipset support watchdog: davinci_wdt: add OF support watchdog: da9052: Fix invalid free of devm_ allocated data watchdog: twl4030_wdt: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER watchdog: remove depends on CONFIG_EXPERIMENTAL watchdog: Convert dev_printk(KERN_<LEVEL> to dev_<level>( watchdog: DA9055 Watchdog driver watchdog: omap_wdt: eliminate goto watchdog: omap_wdt: delete redundant platform_set_drvdata() calls watchdog: omap_wdt: convert to devm_ functions watchdog: omap_wdt: convert to new watchdog core watchdog: WatchDog Timer Driver Core: fix comment watchdog: s3c2410_wdt: use clk_prepare_enable and clk_disable_unprepare watchdog: imx2_wdt: Select the driver via ARCH_MXC watchdog: cpu5wdt.c: add missing del_timer call watchdog: hpwdt.c: Increase version string watchdog: Convert twl4030_wdt to watchdog core davinci_wdt: preparation for switch to common clock framework ... 22 December 2012, 01:10:29 UTC
769cb85 Linus Torvalds 22 December 2012, 01:09:07 UTC Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6 Pull CIFS fixes from Steve French: "Misc small cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: eliminate cifsERROR variable cifs: don't compare uniqueids in cifs_prime_dcache unless server inode numbers are in use cifs: fix double-free of "string" in cifs_parse_mount_options 22 December 2012, 01:09:07 UTC
b49249d Linus Torvalds 22 December 2012, 01:08:06 UTC Merge tag 'dm-3.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull dm update from Alasdair G Kergon: "Miscellaneous device-mapper fixes, cleanups and performance improvements. Of particular note: - Disable broken WRITE SAME support in all targets except linear and striped. Use it when kcopyd is zeroing blocks. - Remove several mempools from targets by moving the data into the bio's new front_pad area(which dm calls 'per_bio_data'). - Fix a race in thin provisioning if discards are misused. - Prevent userspace from interfering with the ioctl parameters and use kmalloc for the data buffer if it's small instead of vmalloc. - Throttle some annoying error messages when I/O fails." * tag 'dm-3.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: (36 commits) dm stripe: add WRITE SAME support dm: remove map_info dm snapshot: do not use map_context dm thin: dont use map_context dm raid1: dont use map_context dm flakey: dont use map_context dm raid1: rename read_record to bio_record dm: move target request nr to dm_target_io dm snapshot: use per_bio_data dm verity: use per_bio_data dm raid1: use per_bio_data dm: introduce per_bio_data dm kcopyd: add WRITE SAME support to dm_kcopyd_zero dm linear: add WRITE SAME support dm: add WRITE SAME support dm: prepare to support WRITE SAME dm ioctl: use kmalloc if possible dm ioctl: remove PF_MEMALLOC dm persistent data: improve improve space map block alloc failure message dm thin: use DMERR_LIMIT for errors ... 22 December 2012, 01:08:06 UTC
10532b5 J. Bruce Fields 22 December 2012, 00:48:59 UTC Revert "nfsd: warn on odd reply state in nfsd_vfs_read" This reverts commit 79f77bf9a4e3dd5ead006b8f17e7c4ff07d8374e. This is obviously wrong, and I have no idea how I missed seeing the warning in testing: I must just not have looked at the right logs. The caller bumps rq_resused/rq_next_page, so it will always be hit on a large enough read. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 December 2012, 01:07:45 UTC
184e251 Linus Torvalds 22 December 2012, 00:40:26 UTC Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull more infiniband changes from Roland Dreier: "Second batch of InfiniBand/RDMA changes for 3.8: - cxgb4 changes to fix lookup engine hash collisions - mlx4 changes to make flow steering usable - fix to IPoIB to avoid pinning dst reference for too long" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cxgb4: Fix bug for active and passive LE hash collision path RDMA/cxgb4: Fix LE hash collision bug for passive open connection RDMA/cxgb4: Fix LE hash collision bug for active open connection mlx4_core: Allow choosing flow steering mode mlx4_core: Adjustments to Flow Steering activation logic for SR-IOV mlx4_core: Fix error flow in the flow steering wrapper mlx4_core: Add QPN enforcement for flow steering rules set by VFs cxgb4: Add LE hash collision bug fix path in LLD driver cxgb4: Add T4 filter support IPoIB: Call skb_dst_drop() once skb is enqueued for sending 22 December 2012, 00:40:26 UTC
0264405 Linus Torvalds 22 December 2012, 00:39:08 UTC Merge tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanup from Arnd Bergmann: "These are a few cleanups for asm-generic: - a set of patches from Lars-Peter Clausen to generalize asm/mmu.h and use it in the architectures that don't need any special handling. - A patch from Will Deacon to remove the {read,write}s{b,w,l} as discussed during the arm64 review - A patch from James Hogan that helps with the meta architecture series." * tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: xtensa: Use generic asm/mmu.h for nommu h8300: Use generic asm/mmu.h c6x: Use generic asm/mmu.h asm-generic/mmu.h: Add support for FDPIC asm-generic/mmu.h: Remove unused vmlist field from mm_context_t asm-generic: io: remove {read,write} string functions asm-generic/io.h: remove asm/cacheflush.h include 22 December 2012, 00:39:08 UTC
7e65df3 Kukjin Kim 21 December 2012, 18:02:13 UTC ARM: dts: fix duplicated build target and alphabetical sort out for exynos Commit db5b0ae00712 ("Merge tag 'dt' of git://git.kernel.org/.../arm-soc") causes a duplicated build target. This patch fixes it and sorts out the build target alphabetically so that we can recognize something wrong easily. Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 22 December 2012, 00:38:29 UTC
9b1536c Gao feng 19 December 2012, 23:41:43 UTC bridge: call br_netpoll_disable in br_add_if When netdev_set_master faild in br_add_if, we should call br_netpoll_disable to do some cleanup jobs,such as free the memory of struct netpoll which allocated in br_netpoll_enable. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 December 2012, 21:17:07 UTC
9650388 Eric Dumazet 21 December 2012, 07:32:10 UTC ipv4: arp: fix a lockdep splat in arp_solicit() Yan Burman reported following lockdep warning : ============================================= [ INFO: possible recursive locking detected ] 3.7.0+ #24 Not tainted --------------------------------------------- swapper/1/0 is trying to acquire lock: (&n->lock){++--..}, at: [<ffffffff8139f56e>] __neigh_event_send +0x2e/0x2f0 but task is already holding lock: (&n->lock){++--..}, at: [<ffffffff813f63f4>] arp_solicit+0x1d4/0x280 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&n->lock); lock(&n->lock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by swapper/1/0: #0: (((&n->timer))){+.-...}, at: [<ffffffff8104b350>] call_timer_fn+0x0/0x1c0 #1: (&n->lock){++--..}, at: [<ffffffff813f63f4>] arp_solicit +0x1d4/0x280 #2: (rcu_read_lock_bh){.+....}, at: [<ffffffff81395400>] dev_queue_xmit+0x0/0x5d0 #3: (rcu_read_lock_bh){.+....}, at: [<ffffffff813cb41e>] ip_finish_output+0x13e/0x640 stack backtrace: Pid: 0, comm: swapper/1 Not tainted 3.7.0+ #24 Call Trace: <IRQ> [<ffffffff8108c7ac>] validate_chain+0xdcc/0x11f0 [<ffffffff8108d570>] ? __lock_acquire+0x440/0xc30 [<ffffffff81120565>] ? kmem_cache_free+0xe5/0x1c0 [<ffffffff8108d570>] __lock_acquire+0x440/0xc30 [<ffffffff813c3570>] ? inet_getpeer+0x40/0x600 [<ffffffff8108d570>] ? __lock_acquire+0x440/0xc30 [<ffffffff8139f56e>] ? __neigh_event_send+0x2e/0x2f0 [<ffffffff8108ddf5>] lock_acquire+0x95/0x140 [<ffffffff8139f56e>] ? __neigh_event_send+0x2e/0x2f0 [<ffffffff8108d570>] ? __lock_acquire+0x440/0xc30 [<ffffffff81448d4b>] _raw_write_lock_bh+0x3b/0x50 [<ffffffff8139f56e>] ? __neigh_event_send+0x2e/0x2f0 [<ffffffff8139f56e>] __neigh_event_send+0x2e/0x2f0 [<ffffffff8139f99b>] neigh_resolve_output+0x16b/0x270 [<ffffffff813cb62d>] ip_finish_output+0x34d/0x640 [<ffffffff813cb41e>] ? ip_finish_output+0x13e/0x640 [<ffffffffa046f146>] ? vxlan_xmit+0x556/0xbec [vxlan] [<ffffffff813cb9a0>] ip_output+0x80/0xf0 [<ffffffff813ca368>] ip_local_out+0x28/0x80 [<ffffffffa046f25a>] vxlan_xmit+0x66a/0xbec [vxlan] [<ffffffffa046f146>] ? vxlan_xmit+0x556/0xbec [vxlan] [<ffffffff81394a50>] ? skb_gso_segment+0x2b0/0x2b0 [<ffffffff81449355>] ? _raw_spin_unlock_irqrestore+0x65/0x80 [<ffffffff81394c57>] ? dev_queue_xmit_nit+0x207/0x270 [<ffffffff813950c8>] dev_hard_start_xmit+0x298/0x5d0 [<ffffffff813956f3>] dev_queue_xmit+0x2f3/0x5d0 [<ffffffff81395400>] ? dev_hard_start_xmit+0x5d0/0x5d0 [<ffffffff813f5788>] arp_xmit+0x58/0x60 [<ffffffff813f59db>] arp_send+0x3b/0x40 [<ffffffff813f6424>] arp_solicit+0x204/0x280 [<ffffffff813a1a70>] ? neigh_add+0x310/0x310 [<ffffffff8139f515>] neigh_probe+0x45/0x70 [<ffffffff813a1c10>] neigh_timer_handler+0x1a0/0x2a0 [<ffffffff8104b3cf>] call_timer_fn+0x7f/0x1c0 [<ffffffff8104b350>] ? detach_if_pending+0x120/0x120 [<ffffffff8104b748>] run_timer_softirq+0x238/0x2b0 [<ffffffff813a1a70>] ? neigh_add+0x310/0x310 [<ffffffff81043e51>] __do_softirq+0x101/0x280 [<ffffffff814518cc>] call_softirq+0x1c/0x30 [<ffffffff81003b65>] do_softirq+0x85/0xc0 [<ffffffff81043a7e>] irq_exit+0x9e/0xc0 [<ffffffff810264f8>] smp_apic_timer_interrupt+0x68/0xa0 [<ffffffff8145122f>] apic_timer_interrupt+0x6f/0x80 <EOI> [<ffffffff8100a054>] ? mwait_idle+0xa4/0x1c0 [<ffffffff8100a04b>] ? mwait_idle+0x9b/0x1c0 [<ffffffff8100a6a9>] cpu_idle+0x89/0xe0 [<ffffffff81441127>] start_secondary+0x1b2/0x1b6 Bug is from arp_solicit(), releasing the neigh lock after arp_send() In case of vxlan, we eventually need to write lock a neigh lock later. Its a false positive, but we can get rid of it without lockdep annotations. We can instead use neigh_ha_snapshot() helper. Reported-by: Yan Burman <yanb@mellanox.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 December 2012, 21:14:07 UTC
9fdc6be Eric Dumazet 21 December 2012, 07:17:21 UTC tuntap: dont use a private kmem_cache Commit 96442e42429 (tuntap: choose the txq based on rxq) added a per tun_struct kmem_cache. As soon as several tun_struct are used, we get an error because two caches cannot have same name. Use the default kmalloc()/kfree_rcu(), as it reduce code size and doesn't have performance impact here. Reported-by: Paul Moore <pmoore@redhat.com> Tested-by: Paul Moore <pmoore@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 December 2012, 21:14:01 UTC
30e6c9f Eric Dumazet 20 December 2012, 17:25:08 UTC net: devnet_rename_seq should be a seqcount Using a seqlock for devnet_rename_seq is not a good idea, as device_rename() can sleep. As we hold RTNL, we dont need a protection for writers, and only need a seqcount so that readers can catch a change done by a writer. Bug added in commit c91f6df2db4972d3 (sockopt: Change getsockopt() of SO_BINDTODEVICE to return an interface name) Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 21 December 2012, 21:14:01 UTC
back to top