https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
31880c3 Linux 3.9-rc6 08 April 2013, 03:49:54 UTC
875b767 Merge git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fix from Gleb Natapov: "Bugfix for the regression introduced by commit c300aa64ddf5" * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Allow cross page reads and writes from cached translations. 07 April 2013, 20:01:25 UTC
39ab967 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "Two quite small fixes: one a build problem, and the other fixes seccomp filters on x32." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix rebuild with EFI_STUB enabled x86: remove the x32 syscall bitmask from syscall_get_nr() 07 April 2013, 19:59:55 UTC
e74e259 alpha: irq: remove deprecated use of IRQF_DISABLED Interrupt handlers are always invoked with interrupts disabled, so remove all uses of the deprecated IRQF_DISABLED flag. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 April 2013, 19:59:30 UTC
e20800f alpha: irq: run all handlers with interrupts disabled Linux has expected that interrupt handlers are executed with local interrupts disabled for a while now, so ensure that this is the case on Alpha even for non-device interrupts such as IPIs. Without this patch, secondary boot results in the following backtrace: warning: at kernel/softirq.c:139 __local_bh_enable+0xb8/0xd0() trace: __local_bh_enable+0xb8/0xd0 irq_enter+0x74/0xa0 scheduler_ipi+0x50/0x100 handle_ipi+0x84/0x260 do_entint+0x1ac/0x2e0 irq_exit+0x60/0xa0 handle_irq+0x98/0x100 do_entint+0x2c8/0x2e0 ret_from_sys_call+0x0/0x10 load_balance+0x3e4/0x870 cpu_idle+0x24/0x80 rcu_eqs_enter_common.isra.38+0x0/0x120 cpu_idle+0x40/0x80 rest_init+0xc0/0xe0 _stext+0x1c/0x20 A similar dump occurs if you try to reboot using magic-sysrq. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Reviewed-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 April 2013, 19:59:30 UTC
cd8d233 alpha: makefile: don't enforce small data model for kernel builds Due to all of the goodness being packed into today's kernels, the resulting image isn't as slim as it once was. In light of this, don't pass -msmall-data to gcc, which otherwise results in link failures due to impossible relocations when compiling anything but the most trivial configurations. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by: Matt Turner <mattst88@gmail.com> Tested-by: Thorsten Kranzkowski <dl8bcu@dl8bcu.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 April 2013, 19:59:30 UTC
aa8b4be alpha: Add irongate_io to PCI bus resources Fixes a NULL pointer dereference at boot on UP1500. Cc: stable@vger.kernel.org Reviewed-and-Tested-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Jay Estabrook <jay.estabrook@gmail.com> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 April 2013, 19:59:30 UTC
8f96452 KVM: Allow cross page reads and writes from cached translations. This patch adds support for kvm_gfn_to_hva_cache_init functions for reads and writes that will cross a page. If the range falls within the same memslot, then this will be a fast operation. If the range is split between two memslots, then the slower kvm_read_guest and kvm_write_guest are used. Tested: Test against kvm_clock unit tests. Signed-off-by: Andrew Honig <ahonig@google.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> 07 April 2013, 10:05:35 UTC
fe69690 Merge tag 'dm-3.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull device-mapper fixes from Alasdair Kergon: "A pair of patches to fix the writethrough mode of the device-mapper cache target when the device being cached is not itself wrapped with device-mapper." * tag 'dm-3.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm cache: reduce bio front_pad size in writeback mode dm cache: fix writes to cache device in writethrough mode 06 April 2013, 02:30:14 UTC
b196553 Merge tag 'pci-v3.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "PCI updates for v3.9: ASPM Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" kexec PCI: Don't try to disable Bus Master on disconnected PCI devices Platform ROM images PCI: Add PCI ROM helper for platform-provided ROM images nouveau: Attempt to use platform-provided ROM image radeon: Attempt to use platform-provided ROM image Hotplug PCI/ACPI: Always resume devices on ACPI wakeup notifications PCI/PM: Disable runtime PM of PCIe ports EISA EISA/PCI: Fix bus res reference EISA/PCI: Init EISA early, before PNP" * tag 'pci-v3.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/PM: Disable runtime PM of PCIe ports PCI/ACPI: Always resume devices on ACPI wakeup notifications PCI: Don't try to disable Bus Master on disconnected PCI devices Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" radeon: Attempt to use platform-provided ROM image nouveau: Attempt to use platform-provided ROM image EISA/PCI: Init EISA early, before PNP EISA/PCI: Fix bus res reference PCI: Add PCI ROM helper for platform-provided ROM images 06 April 2013, 02:29:36 UTC
53f6318 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix erroneous sock_orphan() leading to crashes and double kfree_skb() in NFC protocol. From Thierry Escande and Samuel Ortiz. 2) Fix use after free in remain-on-channel mac80211 code, from Johannes Berg. 3) nf_reset() needs to reset the NF tracing cookie, otherwise we can leak it from one namespace into another. Fix from Gao Feng and Patrick McHardy. 4) Fix overflow in channel scanning array of mwifiex driver, from Stone Piao. 5) Fix loss of link after suspend/shutdown in r8169, from Hayes Wang. 6) Synchronization of unicast address lists to the undelying device doesn't work because whether to sync is maintained as a boolean rather than a true count. Fix from Vlad Yasevich. 7) Fix corruption of TSO packets in atl1e by limiting the segmented packet length. From Hannes Frederic Sowa. 8) Revert bogus AF_UNIX credential passing change and fix the coalescing issue properly, from Eric W Biederman. 9) Changes of ipv4 address lifetime settings needs to generate a notification, from Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits) netfilter: don't reset nf_trace in nf_reset() net: ipv4: notify when address lifetime changes ixgbe: fix registration order of driver and DCA nofitication af_unix: If we don't care about credentials coallesce all messages Revert "af_unix: dont send SCM_CREDENTIAL when dest socket is NULL" bonding: remove sysfs before removing devices atl1e: limit gso segment size to prevent generation of wrong ip length fields net: count hw_addr syncs so that unsync works properly. r8169: fix auto speed down issue netfilter: ip6t_NPT: Fix translation for non-multiple of 32 prefix lengths mwifiex: limit channel number not to overflow memory NFC: microread: Fix build failure due to a new MEI bus API iwlwifi: dvm: fix the passive-no-RX workaround netfilter: nf_conntrack: fix error return code NFC: llcp: Keep the connected socket parent pointer alive mac80211: fix idle handling sequence netfilter: nfnetlink_acct: return -EINVAL if object name is empty netfilter: nfnetlink_queue: fix error return code in nfnetlink_queue_init() netfilter: reset nf_trace in nf_reset mac80211: fix remain-on-channel cancel crash ... 05 April 2013, 21:04:10 UTC
9187082 x86: Fix rebuild with EFI_STUB enabled eboot.o and efi_stub_$(BITS).o didn't get added to "targets", and hence their .cmd files don't get included by the build machinery, leading to the files always getting rebuilt. Rather than adding the two files individually, take the opportunity and add $(VMLINUX_OBJS) to "targets" instead, thus allowing the assignment at the top of the file to be shrunk quite a bit. At the same time, remove a pointless flags override line - the variable assigned to was misspelled anyway, and the options added are meaningless for assembly sources. [ hpa: the patch is not minimal, but I am taking it for -urgent anyway since the excess impact of the patch seems to be small enough. ] Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/515C5D2502000078000CA6AD@nat28.tlf.novell.com Cc: Matthew Garrett <mjg@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> 05 April 2013, 20:59:23 UTC
124dff0 netfilter: don't reset nf_trace in nf_reset() Commit 130549fe ("netfilter: reset nf_trace in nf_reset") added code to reset nf_trace in nf_reset(). This is wrong and unnecessary. nf_reset() is used in the following cases: - when passing packets up the the socket layer, at which point we want to release all netfilter references that might keep modules pinned while the packet is queued. nf_trace doesn't matter anymore at this point. - when encapsulating or decapsulating IPsec packets. We want to continue tracing these packets after IPsec processing. - when passing packets through virtual network devices. Only devices on that encapsulate in IPv4/v6 matter since otherwise nf_trace is not used anymore. Its not entirely clear whether those packets should be traced after that, however we've always done that. - when passing packets through virtual network devices that make the packet cross network namespace boundaries. This is the only cases where we clearly want to reset nf_trace and is also what the original patch intended to fix. Add a new function nf_reset_trace() and use it in dev_forward_skb() to fix this properly. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> 05 April 2013, 19:38:10 UTC
6cfa923 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "Fixes for a number of small glitches in various corners of the MIPS tree. No particular areas is standing out. With this applied all MIPS defconfigs are building fine. No merge conflicts are expected." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Delete definition of SA_RESTORER. MIPS: Fix ISA level which causes secondary cache init bypassing and more MIPS: Fix build error cavium-octeon without CONFIG_SMP MIPS: Kconfig: Rename SNIPROM too MIPS: Alchemy: Fix typo "CONFIG_DEBUG_PCI" MIPS: Unbreak function tracer for 64-bit kernel. 05 April 2013, 19:23:12 UTC
00fa6fe Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes Pull GFS2 fixes from Steven Whitehouse: "There are two patches which fix up a couple of minor issues in the DLM interface code, a missing error path in gfs2_rs_alloc(), one patch which fixes a problem during "withdraw" and a fix for discards/FITRIM when using 4k sector sized devices." * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Issue discards in 512b sectors GFS2: Fix unlock of fcntl locks during withdrawn state GFS2: return error if malloc failed in gfs2_rs_alloc() GFS2: use memchr_inv GFS2: use kmalloc for lvb bitmap 05 April 2013, 19:22:02 UTC
ff802e3 firmware,IB/qib: revert firmware file move Commit e2eed58b4fbf ("IB/qib: change QLogic to Intel") moved a firmware file potentially breaking the ABI. This patch reverts that aspect of the fix as well as reverting the firmware name as used in qib. Reported-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2013, 19:19:39 UTC
e0a77f2 Merge tag 'spi-fix-v3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc Pull spi fixes from Mark Brown: "A bunch of small driver fixes plus a fix for error handling in the core - nothing too exciting overall." * tag 'spi-fix-v3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmensts spi: Unlock a spinlock before calling into the controller driver. spi/s3c64xx: modified error interrupt handling and init spi/bcm63xx: don't disable non enabled clocks in probe error path spi/bcm63xx: Remove unused variable spi: slink-tegra20: move runtime pm calls to transfer_one_message 05 April 2013, 17:04:41 UTC
b2c87ca GFS2: Issue discards in 512b sectors This patch changes GFS2's discard issuing code so that it calls function sb_issue_discard rather than blkdev_issue_discard. The code was calling blkdev_issue_discard and specifying the correct sector offset and sector size, but blkdev_issue_discard expects these values to be in terms of 512 byte sectors, even if the native sector size for the device is different. Calling sb_issue_discard with the BLOCK size instead ensures the correct block-to-512b-sector translation. I verified that "minlen" is specified in blocks, so comparing it to a number of blocks is correct. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> 05 April 2013, 16:55:13 UTC
e24b0bf Revert "drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR" This reverts commit 0ef1594c017521ea89278e80fe3f80dafb17abde. This patch introduced a few races which cannot be easily fixed with a small follow-up patch. Furthermore, the SoC with the broken hardware register, which this patch intended to add support for, can only be used with device trees, which this driver currently does not support. [ Here is the discussion that led to this "revert" patch: https://lkml.org/lkml/2013/4/3/176 ] Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 April 2013, 16:36:53 UTC
c4c80f6 Merge tag 'fbdev-fixes-3.9-rc6' of git://gitorious.org/linux-omap-dss2/linux Pull fbdev fixes from Tomi Valkeinen: "Fix uvesafb crash bug and typoed flag name in fbmon's new videomode code" * tag 'fbdev-fixes-3.9-rc6' of git://gitorious.org/linux-omap-dss2/linux: video:uvesafb: Fix dereference NULL pointer code path fbmon: use VESA_DMT_VSYNC_HIGH to fix typo 05 April 2013, 16:15:46 UTC
8f09aac Merge tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This contains slightly more volumes than usual at this stage, mostly because of my vacation in the last week. Nothing to scare, all small and/or trivial fixes: - Fix loop path handling in ASoC DAPM - Some memory handling fixes in ASoC core - Fix spear_pcm to adapt to the updated API - HD-audio HDMI ELD handling fixes - Fix for CM6331 USB-audio SRC change bugs - Revert power_save_controller option change due to user-space usage - A few other small ASoC and HD-audio fixes" * tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/generic - fix uninitialized variable Revert "ALSA: hda - Allow power_save_controller option override DCAPS" ALSA: hda - fix typo in proc output ALSA: hda - Enabling Realtek ALC 671 codec ALSA: usb: Work around CM6631 sample rate change bug ALSA: hda - bug fix on HDMI ELD debug message ALSA: hda - bug fix on return value when getting HDMI ELD info ASoC: dma-sh7760: Fix compile error ASoC: core: fix invalid free of devm_ allocated data ASoC: spear_pcm: Update to new pcm_new() API ASoC:: max98090: Remove executable bit ASoC: dapm: Fix pointer dereference in is_connected_output_ep() ASoC: pcm030 audio fabric: remove __init from probe ASoC: imx-ssi: Fix occasional AC97 reset failure ASoC: core: fix possible memory leak in snd_soc_bytes_put() ASoC: wm_adsp: fix possible memory leak in wm_adsp_load_coeff() ASoC: dapm: Fix handling of loops ASoC: si476x: Add missing break for SNDRV_PCM_FORMAT_S8 switch case 05 April 2013, 16:06:57 UTC
19b0092 dm cache: reduce bio front_pad size in writeback mode A recent patch to fix the dm cache target's writethrough mode extended the bio's front_pad to include a 1056-byte struct dm_bio_details. Writeback mode doesn't need this, so this patch reduces the per_bio_data_size to 16 bytes in this case instead of 1096. The dm_bio_details structure was added in "dm cache: fix writes to cache device in writethrough mode" which fixed commit e2e74d617e ("dm cache: fix race in writethrough implementation"). In writeback mode we avoid allocating the writethrough-specific members of the per_bio_data structure (the dm_bio_details structure included). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 05 April 2013, 14:36:34 UTC
b844fe6 dm cache: fix writes to cache device in writethrough mode The dm-cache writethrough strategy introduced by commit e2e74d617eadc15 ("dm cache: fix race in writethrough implementation") issues a bio to the origin device, remaps and then issues the bio to the cache device. This more conservative in-series approach was selected to favor correctness over performance (of the previous parallel writethrough). However, this in-series implementation that reuses the same bio to write both the origin and cache device didn't take into account that the block layer's req_bio_endio() modifies a completing bio's bi_sector and bi_size. So the new writethrough strategy needs to preserve these bio fields, and restore them before submission to the cache device, otherwise nothing gets written to the cache (because bi_size is 0). This patch adds a struct dm_bio_details field to struct per_bio_data, and uses dm_bio_record() and dm_bio_restore() to ensure the bio is restored before reissuing to the cache device. Adding such a large structure to the per_bio_data is not ideal but we can improve this later, for now correctness is the important thing. This problem initially went unnoticed because the dm-cache test-suite uses a linear DM device for the dm-cache device's origin device. Writethrough worked as expected because DM submits a *clone* of the original bio, so the original bio which was reused for the cache was never touched. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> 05 April 2013, 14:36:32 UTC
80fa818 MIPS: Delete definition of SA_RESTORER. SA_RESTORER used to be defined as 0x04000000 but only the O32 ABI ever supported its use and no libc was using it, so the entire sa-restorer functionality was removed with lmo commit 39bffc12c3580ab [Zap sa_restorer.] for 2.5.48 retaining only the SA_RESTORER definition as a reminder to avoid accidental reuse of the mask bit. Upstream cdef9602fbf1871a43f0f1b5cea10dd0f275167d [signal: always clear sa_restorer on execve] adds code that assumes sa_sigaction has an sa_restorer field, if SA_RESTORER is defined which would break MIPS. So remove the SA_RESTORER definition before the v3.8.4 merge. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> (cherry picked from commit 17da8d63add23830892ac4dc2cbb3b5d4ffb79a8) 05 April 2013, 13:10:51 UTC
adb3789 MIPS: Fix ISA level which causes secondary cache init bypassing and more The commit a96102be70 introduced set_isa() where compatible ISA info is also set aside from the one gets passed in. It means, for example, 1004K will have MIPS_CPU_ISA_M32R2/M32R1/II/I flags. This leads to things like the following inappropriate: if (c->isa_level == MIPS_CPU_ISA_M32R1 || c->isa_level == MIPS_CPU_ISA_M32R2 || c->isa_level == MIPS_CPU_ISA_M64R1 || c->isa_level == MIPS_CPU_ISA_M64R2) This patch fixes it. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 05 April 2013, 13:10:45 UTC
ed1197f MIPS: Fix build error cavium-octeon without CONFIG_SMP Singed-off-by: EunBong Song <eunb.song@samsung.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 05 April 2013, 13:10:39 UTC
aaa9fad MIPS: Kconfig: Rename SNIPROM too CONFIG_SNIPROM was renamed to CONFIG_FW_SNIPROM in v3.8. Let's rename SNIPROM itself too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: linux-mips@linux-mips.org; Cc: linux-kernel@vger.kernel.org Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 05 April 2013, 13:10:33 UTC
143f0f6 MIPS: Alchemy: Fix typo "CONFIG_DEBUG_PCI" Commit 7517de348663b08a808aff44b5300e817157a568 ("MIPS: Alchemy: Redo PCI as platform driver") added a reference to CONFIG_DEBUG_PCI. Change it to CONFIG_PCI_DEBUG, as that is a valid Kconfig macro. Also add a newline to a debugging printk that this fix enables. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 05 April 2013, 13:10:27 UTC
ad8c396 MIPS: Unbreak function tracer for 64-bit kernel. Commit 58b69401c797 [MIPS: Function tracer: Fix broken function tracing] completely broke the function tracer for 64-bit kernels. The symptom is a system hang very early in the boot process. The fix: Remove/fix $sp adjustments for 64-bit case. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: Al Cooper <alcooperx@gmail.com> Cc: viric@viric.name Cc: stable@vger.kernel.org # 3.8.x Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 05 April 2013, 13:10:22 UTC
868211d ALSA: hda/generic - fix uninitialized variable changed is not initialized in path_power_down_sync, but it is expected to be false in case no change happened in the loop. So set it to false. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> 05 April 2013, 05:19:55 UTC
34e2ed3 net: ipv4: notify when address lifetime changes if userspace changes lifetime of address, send netlink notification and call notifier. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> 05 April 2013, 04:51:12 UTC
f01fc1a ixgbe: fix registration order of driver and DCA nofitication ixgbe_notify_dca cannot be called before driver registration because it expects driver's klist_devices to be allocated and initialized. While on it make sure debugfs files are removed when registration fails. Cc: stable <stable@vger.kernel.org> Signed-off-by: Jakub Kicinski <jakub.kicinski@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 April 2013, 04:49:13 UTC
0e82e7f af_unix: If we don't care about credentials coallesce all messages It was reported that the following LSB test case failed https://lsbbugs.linuxfoundation.org/attachment.cgi?id=2144 because we were not coallescing unix stream messages when the application was expecting us to. The problem was that the first send was before the socket was accepted and thus sock->sk_socket was NULL in maybe_add_creds, and the second send after the socket was accepted had a non-NULL value for sk->socket and thus we could tell the credentials were not needed so we did not bother. The unnecessary credentials on the first message cause unix_stream_recvmsg to start verifying that all messages had the same credentials before coallescing and then the coallescing failed because the second message had no credentials. Ignoring credentials when we don't care in unix_stream_recvmsg fixes a long standing pessimization which would fail to coallesce messages when reading from a unix stream socket if the senders were different even if we did not care about their credentials. I have tested this and verified that the in the LSB test case mentioned above that the messages do coallesce now, while the were failing to coallesce without this change. Reported-by: Karel Srot <ksrot@redhat.com> Reported-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 April 2013, 04:49:13 UTC
25da0e3 Revert "af_unix: dont send SCM_CREDENTIAL when dest socket is NULL" This reverts commit 14134f6584212d585b310ce95428014b653dfaf6. The problem that the above patch was meant to address is that af_unix messages are not being coallesced because we are sending unnecesarry credentials. Not sending credentials in maybe_add_creds totally breaks unconnected unix domain sockets that wish to send credentails to other sockets. In practice this break some versions of udev because they receive a message and the sending uid is bogus so they drop the message. Reported-by: Sven Joachim <svenjoac@gmx.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 April 2013, 04:49:03 UTC
4de79c7 bonding: remove sysfs before removing devices We have a race condition if we try to rmmod bonding and simultaneously add a bond master through sysfs. In bonding_exit() we first remove the devices (through rtnl_link_unregister() ) and only after that we remove the sysfs. If we manage to add a device through sysfs after that the devices were removed - we'll end up with that device/sysfs structure and with the module unloaded. Fix this by first removing the sysfs and only after that calling rtnl_link_unregister(). Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 April 2013, 04:46:13 UTC
31d1670 atl1e: limit gso segment size to prevent generation of wrong ip length fields The limit of 0x3c00 is taken from the windows driver. Suggested-by: Huang, Xiong <xiong@qca.qualcomm.com> Cc: Huang, Xiong <xiong@qca.qualcomm.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> 05 April 2013, 04:46:13 UTC
4543fbe net: count hw_addr syncs so that unsync works properly. A few drivers use dev_uc_sync/unsync to synchronize the address lists from master down to slave/lower devices. In some cases (bond/team) a single address list is synched down to multiple devices. At the time of unsync, we have a leak in these lower devices, because "synced" is treated as a boolean and the address will not be unsynced for anything after the first device/call. Treat "synced" as a count (same as refcount) and allow all unsync calls to work. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 05 April 2013, 04:18:46 UTC
d08d528 Merge tag 'pm+acpi-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Revert of a recent cpuidle change that caused Nehalem machines to hang on boot from Alex Shi. - USB power management fix addressing a crash in the port device object's release routine from Rafael J Wysocki. - Device PM QoS fix for a potential deadlock related to sysfs interface from Rafael J Wysocki. - Fix for a cpufreq crash when the /cpus Device Tree node is missing from Paolo Pisati. - Fix for a build issue on ia64 related to the Boot Graphics Resource Table (BGRT) from Tony Luck. - Two fixes for ACPI handles being set incorrectly for device objects that don't correspond to any ACPI namespace nodes in the I2C and SPI subsystems from Rafael J Wysocki. - Fix for compiler warnings related to CONFIG_PM_DEVFREQ being unset from Rajagopal Venkat. - Fix for a symbol definition typo in cpufreq_governor.h from Borislav Petkov. * tag 'pm+acpi-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / BGRT: Don't let users configure BGRT on non X86 systems cpuidle / ACPI: recover percpu ACPI processor cstate ACPI / I2C: Use parent's ACPI_HANDLE() in acpi_i2c_register_devices() cpufreq: Correct header guards typo ACPI / SPI: Use parent's ACPI_HANDLE() in acpi_register_spi_devices() cpufreq: check OF node /cpus presence before dereferencing it PM / devfreq: Fix compiler warnings for CONFIG_PM_DEVFREQ unset PM / QoS: Avoid possible deadlock related to sysfs access USB / PM: Don't try to hide PM QoS flags from usb_port_device_release() 04 April 2013, 22:56:28 UTC
e2409d8 r8169: fix auto speed down issue It would cause no link after suspending or shutdowning when the nic changes the speed to 10M and connects to a link partner which forces the speed to 100M. Check the link partner ability to determine which speed to set. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 April 2013, 21:46:02 UTC
4f4ecd5 Merge branch 'master' of git://1984.lsi.us.es/nf Pablo Neira Ayuso says: ==================== The following patchset contains netfilter updates for your net tree, they are: * Fix missing the skb->trace reset in nf_reset, noticed by Gao Feng while using the TRACE target with several net namespaces. * Fix prefix translation in IPv6 NPT if non-multiple of 32 prefixes are used, from Matthias Schiffer. * Fix invalid nfacct objects with empty name, they are now rejected with -EINVAL, spotted by Michael Zintakis, patch from myself. * A couple of fixes for wrong return values in the error path of nfnetlink_queue and nf_conntrack, from Wei Yongjun. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 04 April 2013, 21:41:53 UTC
518314f Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into wireless John W. Linville says: ==================== Here are some more fixes intended for the 3.9 stream... Regarding the mac80211 bits, Johannes says: "I had changed the idle handling to simplify it, but broken the sequencing of commands, at least for ath9k-htc, one patch restores the sequence. The other patch fixes a crash Jouni found while stress-testing the remain-on-channel code, when an item is deleted the work struct can run twice and crash the second time." As for the iwlwifi bits, Johannes says: "The only fix here is to the passive-no-RX firmware regulatory enforcement driver support code to not drop auth frames in quick succession, leading to not being able to connect to APs on passive channels in certain circumstances." Don't forget the NFC bits, about which Samuel says: "This time we have: - A crash fix for when a DGRAM LLCP socket is listening while the NFC adapter is physically removed. - A potential double skb free when the LLCP socket receive queue is full. - A fix for properly handling multiple and consecutive LLCP connections, and not trash the socket ack log. - A build failure for the MEI microread physical layer, now that the MEI bus APIs have been merged into char-misc-next." On top of that, Stone Piao provides an mwifiex fix to avoid accessing beyond the end of a buffer. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 04 April 2013, 21:39:06 UTC
b6a9b7f mm: prevent mmap_cache race in find_vma() find_vma() can be called by multiple threads with read lock held on mm->mmap_sem and any of them can update mm->mmap_cache. Prevent compiler from re-fetching mm->mmap_cache, because other readers could update it in the meantime: thread 1 thread 2 | find_vma() | find_vma() struct vm_area_struct *vma = NULL; | vma = mm->mmap_cache; | if (!(vma && vma->vm_end > addr | && vma->vm_start <= addr)) { | | mm->mmap_cache = vma; return vma; | ^^ compiler may optimize this | local variable out and re-read | mm->mmap_cache | This issue can be reproduced with gcc-4.8.0-1 on s390x by running mallocstress testcase from LTP, which triggers: kernel BUG at mm/rmap.c:1088! Call Trace: ([<000003d100c57000>] 0x3d100c57000) [<000000000023a1c0>] do_wp_page+0x2fc/0xa88 [<000000000023baae>] handle_pte_fault+0x41a/0xac8 [<000000000023d832>] handle_mm_fault+0x17a/0x268 [<000000000060507a>] do_protection_exception+0x1e2/0x394 [<0000000000603a04>] pgm_check_handler+0x138/0x13c [<000003fffcf1f07a>] 0x3fffcf1f07a Last Breaking-Event-Address: [<000000000024755e>] page_add_new_anon_rmap+0xc2/0x168 Thanks to Jakub Jelinek for his insight on gcc and helping to track this down. Signed-off-by: Jan Stancek <jstancek@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 April 2013, 18:46:28 UTC
22d1e6f Merge tag 'upstream-3.9-rc6' of git://git.infradead.org/linux-ubifs Pull UBIFS fix from Artem Bityutskiy: "Make the space fixup feature work in the case when the file-system is first mounted R/O and then remounted R/W." * tag 'upstream-3.9-rc6' of git://git.infradead.org/linux-ubifs: UBIFS: make space fixup work in the remount case 04 April 2013, 15:41:43 UTC
6cb437a Merge branch 'pm-fixes' into fixes * pm-fixes: cpufreq: Correct header guards typo cpufreq: check OF node /cpus presence before dereferencing it PM / devfreq: Fix compiler warnings for CONFIG_PM_DEVFREQ unset PM / QoS: Avoid possible deadlock related to sysfs access USB / PM: Don't try to hide PM QoS flags from usb_port_device_release() 04 April 2013, 15:41:10 UTC
fc1a7fe Merge branch 'acpi-fixes' into fixes * acpi-fixes: ACPI / BGRT: Don't let users configure BGRT on non X86 systems cpuidle / ACPI: recover percpu ACPI processor cstate ACPI / I2C: Use parent's ACPI_HANDLE() in acpi_i2c_register_devices() ACPI / SPI: Use parent's ACPI_HANDLE() in acpi_register_spi_devices() 04 April 2013, 15:40:59 UTC
014642c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - Workaround for device ID conflict between Masterkit MA901 usb radio device and Atmel V-USB devices, to avoid regressions from older kernels, by Alexey Klimov - fix for possible race during input device registration in magicmouse driver, by Benjamin Tissoires * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: magicmouse: fix race between input_register() and probe() media: radio-ma901: return ENODEV in probe if usb_device doesn't match HID: fix Masterkit MA901 hid quirks 04 April 2013, 15:40:45 UTC
8d44827 Merge tag 'gpio-fixes-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Two GPIO fixes for the v3.9 series: - Fix erroneous return value in the ICH driver - Make the STMPE driver proper properly on device tree boots" * tag 'gpio-fixes-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: stmpe: pass DT node to irqdomain gpio-ich: Fix value returned by ichx_gpio_request 04 April 2013, 15:40:14 UTC
8fc2442 Revert "ALSA: hda - Allow power_save_controller option override DCAPS" This reverts commit 6ab317419c62850a71e2adfd1573e5ee87d8774f. The commit [6ab317419c: ALSA: hda - Allow power_save_controller option override DCAPS] changed the behavior of power_save_controller so that it can override the driver capability. This assumed that this option is rarely changed dynamically unlike power_save option. Too naive. It turned out that the user-space power-management tool tries to set power_save_controller option to 1 together with power_save option without knowing what's actually doing. This enabled forcibly the runtime PM of the controller, which is known to be broken om many chips thus disabled as default. So, the only sane fix is to revert this commit again. It was intended to ease debugging/testing for runtime PM enablement, but obviously we need another way for it. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=56171 Reported-and-tested-by: Nikita Tsukanov <keks9n@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 04 April 2013, 13:35:39 UTC
aeb3a97 ALSA: hda - fix typo in proc output Rename "Digitial In" to "Digital In". This function is only used for proc output, so should not cause any problems to change. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 04 April 2013, 09:49:16 UTC
c2952d2 GFS2: Fix unlock of fcntl locks during withdrawn state When withdraw occurs, we need to continue to allow unlocks of fcntl locks to occur, however these will only be local, since the node has withdrawn from the cluster. This prevents triggering a VFS level bug trap due to locks remaining when a file is closed. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> 04 April 2013, 08:53:46 UTC
441362d GFS2: return error if malloc failed in gfs2_rs_alloc() The error code in gfs2_rs_alloc() is set to ENOMEM when error but never be used, instead, gfs2_rs_alloc() always return 0. Fix to return 'error'. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> 04 April 2013, 08:53:10 UTC
4146c3d GFS2: use memchr_inv Use memchr_inv to verify that the specified memory range is cleared. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: cluster-devel@redhat.com Cc: Christine Caulfield <ccaulfie@redhat.com> Cc: David Teigland <teigland@redhat.com> 04 April 2013, 08:52:50 UTC
57c7310 GFS2: use kmalloc for lvb bitmap The temp lvb bitmap was on the stack, which could be an alignment problem for __set_bit_le. Use kmalloc for it instead. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> 04 April 2013, 08:52:14 UTC
f1a9a14 HID: magicmouse: fix race between input_register() and probe() Since kernel 3.7, it appears that the input registration occured before the end of magicmouse_setup_input(). This is shown by receiving a lot of "EV_SYN SYN_REPORT 1" instead of normal "EV_SYN SYN_REPORT 0". This value means that the output buffer is full, and the user space is loosing events. Using .input_configured guarantees that the race is not occuring, and that the call of "input_set_events_per_packet(input, 60)" is taken into account by input_register(). Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=908604 Cc: stable@vger.kernel.org Reported-and-Tested-By: Clarke Wixon <cwixon@usa.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 04 April 2013, 07:49:56 UTC
1d87caa ALSA: hda - Enabling Realtek ALC 671 codec * Added the device ID to the modalias list and assinged ALC662 patches for it * Added 4 port support for the device ID 0671 in alc662_parse_auto_config Signed-off-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 04 April 2013, 06:53:51 UTC
66ade47 Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm Pull ARM fixes from Russell King: "Another round of ARM fixes, which include: - Fixing a problem with LPAE mapping sections - Reporting of some hwcaps on Krait CPUs - Avoiding repetitive warnings in the breakpoint code - Fixing a build error noticed on Dove platforms with PJ4 CPUs - Fix masking of level 2 cache revision. - Fixing timer-based udelay() - A larger fix for an erratum causing people major grief with Cortex A15 CPUs" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7690/1: mm: fix CONFIG_LPAE typos ARM: 7689/1: add unwind annotations to ftrace asm ARM: 7685/1: delay: use private ticks_per_jiffy field for timer-based delay ops ARM: 7684/1: errata: Workaround for Cortex-A15 erratum 798181 (TLBI/DSB operations) ARM: 7682/1: cache-l2x0: fix masking of RTL revision numbering and set_debug init ARM: iWMMXt: always enable iWMMXt support with PJ4 CPUs ARM: 7681/1: hw_breakpoint: use warn_once to avoid spam from reset_ctrl_regs() ARM: 7678/1: Work around faulty ISAR0 register in some Krait CPUs ARM: 7680/1: Detect support for SDIV/UDIV from ISAR0 register ARM: 7679/1: Clear IDIVT hwcap if CONFIG_ARM_THUMB=n ARM: 7677/1: LPAE: Fix mapping in alloc_init_section for unaligned addresses ARM: KVM: vgic: take distributor lock on sync_hwstate path ARM: KVM: vgic: force EOIed LRs to the empty state 03 April 2013, 23:15:17 UTC
de7d5f7 PCI/PM: Disable runtime PM of PCIe ports The runtime PM of PCIe ports turns out to be quite fragile, as in some cases things work while in some other cases they don't and we don't seem to have a good way to determine whether or not they are going to work in advance. For this reason, avoid enabling runtime PM for PCIe ports by keeping their runtime PM reference counters always above 0 for the time being. When a PCIe port is suspended, it can no longer report events like hotplug, so hotplug below the port may not work, as in the bug report below. [bhelgaas: changelog, stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=53811 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.6+ 03 April 2013, 21:54:59 UTC
24ad0ef PCI/ACPI: Always resume devices on ACPI wakeup notifications It turns out that the _Lxx control methods provided by some BIOSes clear the PME Status bit of PCI devices they handle, which means that pci_acpi_wake_dev() cannot really use that bit to check whether or not the device has signalled wakeup. One symptom of the problem is, for example, that when an affected PCI USB controller is runtime-suspended, then plugging in a new USB device into one of the controller's ports will not wake up the controller, which should happen. For this reason, make pci_acpi_wake_dev() always attempt to resume the device it is called for regardless of the device's PME Status bit value (that bit still has to be cleared if set at this point, though). Reported-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Matthew Garrett <mjg59@srcf.ucam.org> CC: stable@vger.kernel.org # v3.7+ 03 April 2013, 21:49:52 UTC
cbfa0e7 Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Unfortunately, we introduced some big-endian bugs during the last merge window. Fortunately, Cai and Christian noticed before 3.9 shipped." * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix big-endian bugs which could cause fs corruptions 03 April 2013, 18:21:13 UTC
407ad2b Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 03 April 2013, 17:50:34 UTC
cd0e4a9 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull reiserfs fix from Jan Kara: "A fix for reiserfs xattr bug exposed by changes to lookup_one_len()" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: reiserfs: Fix warning and inode leak when deleting inode with xattrs 03 April 2013, 17:49:27 UTC
17eb3d8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Just a bunch of bugfixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: provide emtpy check_pgt_cache() function s390/uaccess: fix page table walk s390/3270: fix minor_start issue s390/uaccess: fix clear_user_pt() s390/scm_blk: fix error return code in scm_blk_init() s390/scm_block: fix printk format string drivers/Kconfig: add several missing GENERIC_HARDIRQS dependencies 03 April 2013, 17:48:22 UTC
8cde7ad ext4: fix big-endian bugs which could cause fs corruptions When an extent was zeroed out, we forgot to do convert from cpu to le16. It could make us hit a BUG_ON when we try to write dirty pages out. So fix it. [ Also fix a bug found by Dmitry Monakhov where we were missing le32_to_cpu() calls in the new indirect punch hole code. There are a number of other big endian warnings found by static code analyzers, but we'll wait for the next merge window to fix them all up. These fixes are designed to be Obviously Correct by code inspection, and easy to demonstrate that it won't make any difference (and hence, won't introduce any bugs) on little endian architectures such as x86. --tytso ] Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reported-by: CAI Qian <caiqian@redhat.com> Reported-by: Christian Kujau <lists@nerdbynature.de> Cc: Dmitry Monakhov <dmonakhov@openvz.org> 03 April 2013, 16:37:17 UTC
4e1db26 ARM: 7690/1: mm: fix CONFIG_LPAE typos CONFIG_LPAE doesn't exist: the correct option is CONFIG_ARM_LPAE, so fix up the two typos under arch/arm/. The fix to head.S is slightly scary, but this is just for setting up an early io-mapping for the serial port when running on a big-endian, LPAE system. Since these systems don't exist in the wild (at least, I have no access to one outside of kvmtool, which doesn't provide a serial port suitable for earlyprintk), then we can revisit the code later if it causes any problems. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 03 April 2013, 15:45:51 UTC
b21e023 ARM: 7689/1: add unwind annotations to ftrace asm Add unwind annotations to the ftrace assembly code so that the function tracer's stacktracing options (func_stack_trace, etc.) work when CONFIG_ARM_UNWIND is enabled. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 03 April 2013, 15:45:50 UTC
6f3d90e ARM: 7685/1: delay: use private ticks_per_jiffy field for timer-based delay ops Commit 70264367a243 ("ARM: 7653/2: do not scale loops_per_jiffy when using a constant delay clock") fixed a problem with our timer-based delay loop, where loops_per_jiffy is scaled by cpufreq yet used directly by the timer delay ops. This patch fixes the problem in a more elegant way by keeping a private ticks_per_jiffy field in the delay ops, independent of loops_per_jiffy and therefore not subject to scaling. The loop-based delay continues to use loops_per_jiffy directly, as it should. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 03 April 2013, 15:45:50 UTC
93dc688 ARM: 7684/1: errata: Workaround for Cortex-A15 erratum 798181 (TLBI/DSB operations) On Cortex-A15 (r0p0..r3p2) the TLBI/DSB are not adequately shooting down all use of the old entries. This patch implements the erratum workaround which consists of: 1. Dummy TLBIMVAIS and DSB on the CPU doing the TLBI operation. 2. Send IPI to the CPUs that are running the same mm (and ASID) as the one being invalidated (or all the online CPUs for global pages). 3. CPU receiving the IPI executes a DMB and CLREX (part of the exception return code already). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 03 April 2013, 15:45:49 UTC
6e7acee ARM: 7682/1: cache-l2x0: fix masking of RTL revision numbering and set_debug init Commit b8db6b8 (ARM: 7547/4: cache-l2x0: add support for Aurora L2 cache ctrl) moved the masking of the part ID which caused the RTL version to be lost. Commit 6248d06 (ARM: 7545/1: cache-l2x0: make outer_cache_fns a field of l2x0_of_data) changed how .set_debug is initialized. Both commits break commit 74ddcdb (ARM: 7608/1: l2x0: Only set .set_debug on PL310 r3p0 and earlier) which uses the RTL version to conditionally set .set_debug function pointer. Commit b8db6b8 also caused the printed cache ID to be missing the version information. Fix this by reverting how the part number is masked so the RTL version info is maintained. The cache-id-part DT property does not set the RTL bits so masking them should have no effect. Also, re-arrange the order of the function pointer init so the .set_debug function can be overridden. Reported-by: Paolo Pisati <paolo.pisati@canonical.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Yehuda Yitschak <yehuday@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 03 April 2013, 15:45:48 UTC
698613b ARM: iWMMXt: always enable iWMMXt support with PJ4 CPUs Jason Cooper reports these build errors: arch/arm/kernel/built-in.o: In function `iwmmxt_do': /.../arch/arm/kernel/pj4-cp0.c:36: undefined reference to `iwmmxt_task_release' /.../arch/arm/kernel/pj4-cp0.c:40: undefined reference to `iwmmxt_task_switch' make: *** [vmlinux] Error 1 This is caused because the PJ4 code explicitly references the iWMMXt code, but doesn't require it to be built. Fix this by ensuring that iWMMXt is always enabled with PJ4. Reported-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 03 April 2013, 15:40:33 UTC
690a863 ALSA: usb: Work around CM6631 sample rate change bug The C-Media CM6631 USB receiver doesn't respond to changes in sample rate while the interface is active. The same behavior is observed in other UAC2 hardware like the VIA VT1731. Reset the interface after setting the sampling frequency on sample rate changes, to ensure that the sample rate set by snd_usb_init_sample_rate() is used. Otherwise, the device will try to use the sample rate of the previous stream, causing distorted sound on sample rate changes. The reset is performed for all UAC2 devices, as it should not affect a standards compliant device, but it is only necessary for C-Media CM6631, VIA VT1731 and possibly others. Failure to read sample rate from the device is not handled as an error in set_sample_rate_v2(), as (permanent or intermittent) failure to read sample rate isn't essential for a successful sample rate set. Signed-off-by: Torstein Hegge <hegge@resisty.net> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 03 April 2013, 15:05:44 UTC
e66cd53 ACPI / BGRT: Don't let users configure BGRT on non X86 systems Fengguang Wu's 0-Day kernel build testing backend found the following build error for an allmodconfig build on ia64: drivers/built-in.o: In function `show_yoffset': >> bgrt.c:(.text+0xe5a71): undefined reference to `bgrt_tab' >> bgrt.c:(.text+0xe5a91): undefined reference to `bgrt_tab' drivers/built-in.o: In function `show_xoffset': >> bgrt.c:(.text+0xe5b51): undefined reference to `bgrt_tab' >> bgrt.c:(.text+0xe5b71): undefined reference to `bgrt_tab' drivers/built-in.o: In function `show_type': >> bgrt.c:(.text+0xe5c31): undefined reference to `bgrt_tab' drivers/built-in.o:bgrt.c:(.text+0xe5c51): more undefined references to `bgrt_tab' follow drivers/built-in.o: In function `bgrt_init': bgrt.c:(.init.text+0x8931): undefined reference to `bgrt_image' bgrt.c:(.init.text+0x8932): undefined reference to `bgrt_image_size' bgrt.c:(.init.text+0x8950): undefined reference to `bgrt_image' bgrt.c:(.init.text+0x8960): undefined reference to `bgrt_image_size' The problem is that all these undefined names are provided by arch/x86/platform/efi/efi-bgrt.c - which is obviously not available to the ia64 build. It doesn't seem useful to provide the BGRT support for Itanium (many systems are headless and have no graphics at all). So just don't let users configure this driver on non-X86 machines. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 03 April 2013, 11:17:20 UTC
906b1c3 netfilter: ip6t_NPT: Fix translation for non-multiple of 32 prefix lengths The bitmask used for the prefix mangling was being calculated incorrectly, leading to the wrong part of the address being replaced when the prefix length wasn't a multiple of 32. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 03 April 2013, 10:24:56 UTC
da241ef Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix VSOCK layer handling of context ID changes, from Reilly Grant. 2) Now that we have a synchronize_net() in netdev_rx_handler_unregister(), we can't let any call sites hold locks. Unfortunately bonding does, so we have to drop the rwlock there a little bit earlier, fix from Veaceslav Falico. 3) MAC address setting loop exits one iteration too early in mlx4 driver, from Yan Burman. 4) Restore ipv6 routes properly upon ifdown/ifup of loopback, from Balakumaran Kannan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: VSOCK: Handle changes to the VMCI context ID. net IPv6 : Fix broken IPv6 routing table after loopback down-up cbq: incorrect processing of high limits net/mlx4_en: Fix setting initial MAC address bonding: get netdev_rx_handler_unregister out of locks 03 April 2013, 01:58:01 UTC
6e8517a Merge tag 'regmap-v3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "A small collection of fixes. The most important ones are those from Stephen and Lars-Peter both of which fix cache issues that have been lurking for a while but not manifesting noticably enough for anyone to report them." * tag 'regmap-v3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: async: Add missing return regmap: don't corrupt work buffer in _regmap_raw_write() regmap: cache Fix regcache-rbtree sync regmap: Initialize `map->debugfs' before regcache 03 April 2013, 01:53:43 UTC
bd709bd Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull DRM fixes from Dave Airlie: "Two core fixes, both regressions, along with some intel and some nouveau fixes for regressions and oopses" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: correctly restore mappings if drm_open fails drm/nouveau: fix NULL ptr dereference from nv50_disp_intr() drm/nouveau: fix handling empty channel list in ioctl's drm: don't unlock in the addfb error paths drm/i915: Fix build failure drm/i915: Be sure to turn hsync/vsync back on at crt enable (v2) drm/i915: duct-tape locking when eDP init fails 03 April 2013, 01:52:24 UTC
aea7fab Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "A collection of fixes pretty much across the MIPS code. Even the change to include/linux/signal.h by David Howells' 2a1486981c13 ("Fix breakage in MIPS siginfo handling") should be considered MIPS-specific as it touches an ifdefed segment that is only relevant to MIPS and which unfortunately can't be made to go away entirely." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: Fix breakage in MIPS siginfo handling Revert "MIPS: BCM63XX: Call board_register_device from device_initcall()" MIPS: BCM63XX: Make nvram checksum failure non fatal MIPS: Fix code generation for non-DSP capable CPUs MIPS: Fix inconsistent formatting inside /proc/cpuinfo MIPS: SEAD3: Enable LL/SC. MIPS: Get rid of CONFIG_CPU_HAS_LLSC again MIPS: Add dependencies for HAVE_ARCH_TRANSPARENT_HUGEPAGE MIPS: VR4133: Fix probe for LL/SC. MIPS: Fix logic errors in bitops.c MIPS: Use CONFIG_CPU_MIPSR2 in csum_partial.S MIPS: compat: Return same error ENOSYS as native for invalid operation. 03 April 2013, 01:47:23 UTC
6e0eda3 PCI: Don't try to disable Bus Master on disconnected PCI devices This is a fix for commit 7897e60227 ("PCI: Disable Bus Master unconditionally in pci_device_shutdown()"). Vivek reported that with this commit, kexec failed because none of his SATA disks came up. A ->shutdown() callback might put the device in D3cold, which means config space is no longer available. [bhelgaas: changelog] Link: https://lkml.org/lkml/2013/3/12/529 Reported-and-Tested-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 03 April 2013, 00:03:09 UTC
b8178f1 Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" This reverts commit 8c33f51df406e1a1f7fa4e9b244845b7ebd61fa6. Conflicts: drivers/acpi/pci_root.c This commit broke some pre-1.1 PCIe devices by leaving them with ASPM enabled. Previously, we had disabled ASPM on these devices because many of them don't implement it correctly (per 149e1637). Requesting _OSC control early means that aspm_disabled may be set before we scan the PCI bus and configure link ASPM state. But the ASPM configuration currently skips the check for pre-PCIe 1.1 devices when aspm_disabled is set, like this: acpi_pci_root_add acpi_pci_osc_support if (flags != base_flags) pcie_no_aspm aspm_disabled = 1 pci_acpi_scan_root ... pcie_aspm_init_link_state pcie_aspm_sanity_check if (!aspm_disabled) /* check for pre-PCIe 1.1 device */ Therefore, setting aspm_disabled early means that we leave ASPM enabled on these pre-PCIe 1.1 devices, which is a regression for some devices. The best fix would be to clean up the ASPM init so we can evaluate _OSC before scanning the bug (that way boot-time and hot-add discovery will work the same), but that requires significant rework. For now, we'll just revert the _OSC change as the lowest-risk fix. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=55211 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.8+ 03 April 2013, 00:02:40 UTC
be7f088 Merge branch 'pci/yinghai-eisa' into for-linus * pci/yinghai-eisa: EISA/PCI: Init EISA early, before PNP EISA/PCI: Fix bus res reference 03 April 2013, 00:02:28 UTC
8b4b9f2 x86: remove the x32 syscall bitmask from syscall_get_nr() Commit fca460f95e928bae373daa8295877b6905bc62b8 simplified the x32 implementation by creating a syscall bitmask, equal to 0x40000000, that could be applied to x32 syscalls such that the masked syscall number would be the same as a x86_64 syscall. While that patch was a nice way to simplify the code, it went a bit too far by adding the mask to syscall_get_nr(); returning the masked syscall numbers can cause confusion with callers that expect syscall numbers matching the x32 ABI, e.g. unmasked syscall numbers. This patch fixes this by simply removing the mask from syscall_get_nr() while preserving the other changes from the original commit. While there are several syscall_get_nr() callers in the kernel, most simply check that the syscall number is greater than zero, in this case this patch will have no effect. Of those remaining callers, they appear to be few, seccomp and ftrace, and from my testing of seccomp without this patch the original commit definitely breaks things; the seccomp filter does not correctly filter the syscalls due to the difference in syscall numbers in the BPF filter and the value from syscall_get_nr(). Applying this patch restores the seccomp BPF filter functionality on x32. I've tested this patch with the seccomp BPF filters as well as ftrace and everything looks reasonable to me; needless to say general usage seemed fine as well. Signed-off-by: Paul Moore <pmoore@redhat.com> Link: http://lkml.kernel.org/r/20130215172143.12549.10292.stgit@localhost Cc: <stable@vger.kernel.org> Cc: Will Drewry <wad@chromium.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> 02 April 2013, 21:38:09 UTC
a8ec3a6 drm: correctly restore mappings if drm_open fails If first drm_open fails, the error-handling path will incorrectly restore inode's mapping to NULL. This can cause the crash later on. Fix by separately storing away mapping pointers that drm_open can touch and restore each from its own respective variable if the call fails. Fixes: https://bugzilla.novell.com/show_bug.cgi?id=807850 (thanks to Michal Hocko for investigating investigating and finding the root cause of the bug) Reference: http://lists.freedesktop.org/archives/dri-devel/2013-March/036564.html v2: Use one variable to store file and inode mapping since they are the same at the function entry. Fix spelling mistakes in commit message. v3: Add reference to the original bug report. Reported-by: Marco Munderloh <munderl@tnt.uni-hannover.de> Tested-by: Marco Munderloh <munderl@tnt.uni-hannover.de> Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 02 April 2013, 20:44:38 UTC
7cebefe Merge branch 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Oops fixers. * 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: fix NULL ptr dereference from nv50_disp_intr() drm/nouveau: fix handling empty channel list in ioctl's 02 April 2013, 20:44:02 UTC
1caa590 Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-next One locking regression fix, and a couple of other i915 ones. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm: don't unlock in the addfb error paths drm/i915: Fix build failure drm/i915: Be sure to turn hsync/vsync back on at crt enable (v2) drm/i915: duct-tape locking when eDP init fails 02 April 2013, 20:41:15 UTC
990454b VSOCK: Handle changes to the VMCI context ID. The VMCI context ID of a virtual machine may change at any time. There is a VMCI event which signals this but datagrams may be processed before this is handled. It is therefore necessary to be flexible about the destination context ID of any datagrams received. (It can be assumed to be correct because it is provided by the hypervisor.) The context ID on existing sockets should be updated to reflect how the hypervisor is currently referring to the system. Signed-off-by: Reilly Grant <grantr@vmware.com> Acked-by: Andy King <acking@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 April 2013, 18:39:17 UTC
25fb6ca net IPv6 : Fix broken IPv6 routing table after loopback down-up IPv6 Routing table becomes broken once we do ifdown, ifup of the loopback(lo) interface. After down-up, routes of other interface's IPv6 addresses through 'lo' are lost. IPv6 addresses assigned to all interfaces are routed through 'lo' for internal communication. Once 'lo' is down, those routing entries are removed from routing table. But those removed entries are not being re-created properly when 'lo' is brought up. So IPv6 addresses of other interfaces becomes unreachable from the same machine. Also this breaks communication with other machines because of NDISC packet processing failure. This patch fixes this issue by reading all interface's IPv6 addresses and adding them to IPv6 routing table while bringing up 'lo'. ==Testing== Before applying the patch: $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo 2000::20/128 :: Un 0 1 0 lo fe80::xxxx:xxxx:xxxx:xxxx/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ sudo ifdown lo $ sudo ifup lo $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ After applying the patch: $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo 2000::20/128 :: Un 0 1 0 lo fe80::xxxx:xxxx:xxxx:xxxx/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ sudo ifdown lo $ sudo ifup lo $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo 2000::20/128 :: Un 0 1 0 lo fe80::xxxx:xxxx:xxxx:xxxx/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ Signed-off-by: Balakumaran Kannan <Balakumaran.Kannan@ap.sony.com> Signed-off-by: Maruthi Thotad <Maruthi.Thotad@ap.sony.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 April 2013, 18:37:19 UTC
f0f6ee1 cbq: incorrect processing of high limits currently cbq works incorrectly for limits > 10% real link bandwidth, and practically does not work for limits > 50% real link bandwidth. Below are results of experiments taken on 1 Gbit link In shaper | Actual Result -----------+--------------- 100M | 108 Mbps 200M | 244 Mbps 300M | 412 Mbps 500M | 893 Mbps This happen because of q->now changes incorrectly in cbq_dequeue(): when it is called before real end of packet transmitting, L2T is greater than real time delay, q_now gets an extra boost but never compensate it. To fix this problem we prevent change of q->now until its synchronization with real time. Signed-off-by: Vasily Averin <vvs@openvz.org> Reviewed-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 April 2013, 18:29:20 UTC
2dc958f ipc: set msg back to -EAGAIN if copy wasn't performed Make sure that msg pointer is set back to error value in case of MSG_COPY flag is set and desired message to copy wasn't found. This garantees that msg is either a error pointer or a copy address. Otherwise the last message in queue will be freed without unlinking from the queue (which leads to memory corruption) and the dummy allocated copy won't be released. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 April 2013, 17:09:01 UTC
bab6a9e net/mlx4_en: Fix setting initial MAC address Commit 6bbb6d9 "net/mlx4_en: Optimize Rx fast path filter checks" introduced a regression under which the MAC address read from the card was not converted correctly (the most significant byte was not handled), fix that. Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Yan Burman <yanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 April 2013, 16:07:56 UTC
fcd9943 bonding: get netdev_rx_handler_unregister out of locks Now that netdev_rx_handler_unregister contains synchronize_net(), we need to call it outside of bond->lock, cause it might sleep. Also, remove the already unneded synchronize_net(). Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 April 2013, 16:05:28 UTC
118c9a4 Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC bug fixes from Arnd Bergmann: "After a quiet set of fixes for 3.9-rc4, a lot of people woke up and sent urgent fixes for 3.9. I pushed back on a number of them that got deferred to 3.10, but these are the ones that seemed important. Regression in 3.9: - Multiple regressions in OMAP2+ clock cleanup - SH-Mobile frame buffer bug fix that merged here because of maintainer MIA - ux500 prcmu changes broke DT booting - MMCI duplicated regulator setup on ux500 - New ux500 clock driver broke ethernet on snowball - Local interrupt driver for mvebu broke ethernet - MVEBU GPIO driver did not get set up right on Orion DT - incorrect interrupt number on Orion crypto for DT Long-standing bugs, including candidates for stable: - Kirkwood MMC needs to disable invalid card detect pins - MV SDIO pinmux was wrong on Mirabox - GoFlex Net board file needs to set NAND chip delay - MSM timer restart race - ep93xx early debug code broke in 3.7 - i.MX CPU hotplug race - Incorrect clock setup for OMAP1 USB - Workaround for bad clock setup by some old OMAP4 boot loaders - Static I/O mappings on cns3xxx since 3.2" * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: cns3xxx: fix mapping of private memory region arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port. arm: orion5x: correct IRQ used in dtsi for mv_cesa arm: orion5x: fix orion5x.dtsi gpio parameters ARM: Kirkwood: fix unused mvsdio gpio pins arm: mvebu: Use local interrupt only for the timer 0 ARM: kirkwood: Fix chip-delay for GoFlex Net ARM: ux500: Enable the clock controlling Ethernet on Snowball ARM: ux500: Stop passing ios_handler() as an MMCI power controlling call-back ARM: ux500: Apply the TCPM and TCDM locations and sizes to dbx5x0 DT fbdev: sh_mobile_lcdc: fixup B side hsync adjust settings ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized ARM: imx: fix sync issue between imx_cpu_die and imx_cpu_kill ARM: msm: Stop counting before reprogramming clockevent ARM: ep93xx: Fix wait for UART FIFO to be empty ARM: OMAP4: PM: fix PM regression introduced by recent clock cleanup ARM: OMAP3: hwmod data: keep MIDLEMODE in force-standby for musb ARM: OMAP4: clock data: lock USB DPLL on boot ARM: OMAP1: fix USB host on 1710 02 April 2013, 15:35:03 UTC
f8e9248 Merge branch 'for-3.9' of git://linux-nfs.org/~bfields/linux Pull nfsd bugfix from J Bruce Fields: "An xdr decoding error--thanks, Toralf Förster, and Trinity!" * 'for-3.9' of git://linux-nfs.org/~bfields/linux: nfsd4: reject "negative" acl lengths 02 April 2013, 14:56:20 UTC
06d1d8c Merge tag 'v3.9-rc1_cns3xxx_fixes' of git://git.infradead.org/users/cbou/linux-cns3xxx into fixes From Anton Vorontsov <anton@enomsg.org>: This tag includes Mac Lin's work to revive CNS3xxx booting: "Since commit 0536bdf33faf (ARM: move iotable mappings within the vmalloc region), [...] the pre-defined iotable mappings is not in the vmalloc region. [...] move the iotable mappings into the vmalloc region, and merge the MPCore private memory region (containing the SCU, the GIC and the TWD) as a single region." Plus there is a small cosmetic fix, also from Mac Lin. * tag 'v3.9-rc1_cns3xxx_fixes' of git://git.infradead.org/users/cbou/linux-cns3xxx: ARM: cns3xxx: fix mapping of private memory region [arnd: dropped the cosmetic fix from the merge as it is not needed for 3.9] Signed-off-by: Arnd Bergmann <arnd@arndb.de> 02 April 2013, 14:09:45 UTC
6240a10 cpuidle / ACPI: recover percpu ACPI processor cstate Commit ac3ebafa81af76d6 "ACPI / idle: remove usage of the statedata" changed the percpu processor cstate to a unified cstate in ACPI idle. That caused all our NHM boxes to boot hang or panic. 2178751 Task dump for CPU 1: 2178752 swapper/1 R running task 6736 0 1 0x00000000 2178753 ffff8801e8029dc8 ffffffff8101cf96 ffff8801e8029e28 ffffffff813d294b 2178754 0000000000000f99 0000000000000003 00000000003cf654 0000000025c17d03 2178755 ffff8801e8029e38 ffff8801e74fc000 00000002590dc5c4 ffffffff8163cdb0 2178756 Call Trace: 2178757 [<ffffffff8101cf96>] ? acpi_processor_ffh_cstate_enter+0x2d/0x2f 2178758 [<ffffffff813d294b>] acpi_idle_enter_bm+0x1b1/0x236 2178759 [<ffffffff8163cdb0>] ? disable_cpuidle+0x10/0x10 2178760 [<ffffffff8163cdc2>] cpuidle_enter+0x12/0x14 2178761 [<ffffffff8163d286>] cpuidle_wrap_enter+0x2f/0x6d 2178762 [<ffffffff8163d2d4>] cpuidle_enter_tk+0x10/0x12 2178763 [<ffffffff8163cdd6>] cpuidle_enter_state+0x12/0x3a 2178764 [<ffffffff8163d4a7>] cpuidle_idle_call+0xe8/0x161 2178765 [<ffffffff81008d99>] cpu_idle+0x5e/0xa4 2178766 [<ffffffff8174c6c1>] start_secondary+0x1a9/0x1ad 2178767 Task dump for CPU 2: In fact, the ACPI idle is based on the assumption of difference percpu cstate structures that are necessary for the implementation to work cprrectly. A unique acpi_processor_cx is not sifficient by far. This patch is just a quick fix re-introducing the percpu cstates. If someone really wants to unify the ACPI cstates, please make sure that the whole software infrastructure is changed and take hardware as well as many different kinds of BIOS settings into account. [rjw: Changelog] Reported-by: LKP project <lkp@linux.intel.com> Reported-by: Xie ChanglongX <changlongx.xie@intel.com> Tested-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 02 April 2013, 13:31:28 UTC
b34bb1e ACPI / I2C: Use parent's ACPI_HANDLE() in acpi_i2c_register_devices() The ACPI handle of struct i2c_adapter's dev member should not be set, because this causes that struct i2c_adapter to be associated with the ACPI device node corresponding to its parent as the second "physical_device", which is incorrect (this happens during the registration of struct i2c_adapter). Consequently, acpi_i2c_register_devices() should use the ACPI handle of the parent of the struct i2c_adapter it is called for rather than the struct i2c_adapter's ACPI handle (which should be NULL). Make that happen and modify the i2c-designware-platdrv driver, which currently is the only driver for ACPI-enumerated I2C controller chips, not to set the ACPI handle for the struct i2c_adapter it creates. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> 02 April 2013, 13:30:41 UTC
beb0ff3 cpufreq: Correct header guards typo It should be "governor". Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 02 April 2013, 13:14:29 UTC
090da75 video:uvesafb: Fix dereference NULL pointer code path platform_device_alloc could failed and return NULL, we should check this before call platform_device_put. Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> 02 April 2013, 10:33:55 UTC
477fc03 fbmon: use VESA_DMT_VSYNC_HIGH to fix typo VESA_DMT_VSYNC_HIGH should be used instead of VESA_DMT_HSYNC_HIGH, because FB_SYNC_VERT_HIGH_ACT is related to vsync, not to hsync. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> 02 April 2013, 10:30:11 UTC
1025091 ALSA: hda - bug fix on HDMI ELD debug message This patch let ELD debug message show 'pin_eld->monitor_present' which reflects the real pin response to verb GET_PIN_SENSE. 'eld->monitor_present' should not be used here because 'eld' is a temp structure now and so its "monitor_present" is not set. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Acked-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 02 April 2013, 09:55:55 UTC
2ef5692 ALSA: hda - bug fix on return value when getting HDMI ELD info In function snd_hdmi_get_eld(), the variable 'ret' should be initialized to 0. Otherwise it will be returned uninitialized as non-zero after ELD info is got successfully. Thus hdmi_present_sense() will always assume ELD info is invalid by mistake, and /proc file system cannot show the proper ELD info. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Cc: stable@vger.kernel.org Acked-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 02 April 2013, 09:55:23 UTC
ea019fd Merge tag 'asoc-fix-v3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.9 A few more fixes here and there, including quite a few nasty driver specific ones, but nothing that has a major general impact. 02 April 2013, 09:44:51 UTC
back to top