Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
e4e737b Linus Torvalds 20 September 2021, 00:28:22 UTC Linux 5.15-rc2 20 September 2021, 00:28:22 UTC
316e8d7 Linus Torvalds 20 September 2021, 00:13:35 UTC pci_iounmap'2: Electric Boogaloo: try to make sense of it all Nathan Chancellor reports that the recent change to pci_iounmap in commit 9caea0007601 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled") causes build errors on arm64. It took me about two hours to convince myself that I think I know what the logic of that mess of #ifdef's in the <asm-generic/io.h> header file really aim to do, and rewrite it to be easier to follow. Famous last words. Anyway, the code has now been lifted from that grotty header file into lib/pci_iomap.c, and has fairly extensive comments about what the logic is. It also avoids indirecting through another confusing (and badly named) helper function that has other preprocessor config conditionals. Let's see what odd architecture did something else strange in this area to break things. But my arm64 cross build is clean. Fixes: 9caea0007601 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled") Reported-by: Nathan Chancellor <nathan@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ulrich Teichert <krypton@ulrich-teichert.org> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 20 September 2021, 00:13:35 UTC
20621d2 Linus Torvalds 19 September 2021, 20:29:36 UTC Merge tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Prevent a infinite loop in the MCE recovery on return to user space, which was caused by a second MCE queueing work for the same page and thereby creating a circular work list. - Make kern_addr_valid() handle existing PMD entries, which are marked not present in the higher level page table, correctly instead of blindly dereferencing them. - Pass a valid address to sanitize_phys(). This was caused by the mixture of inclusive and exclusive ranges. memtype_reserve() expect 'end' being exclusive, but sanitize_phys() wants it inclusive. This worked so far, but with end being the end of the physical address space the fail is exposed. - Increase the maximum supported GPIO numbers for 64bit. Newer SoCs exceed the previous maximum. * tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Avoid infinite loop for copy from user recovery x86/mm: Fix kern_addr_valid() to cope with existing but not present entries x86/platform: Increase maximum GPIO number for X86_64 x86/pat: Pass valid address to sanitize_phys() 19 September 2021, 20:29:36 UTC
fec3036 Linus Torvalds 19 September 2021, 20:22:40 UTC Merge tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fix from Thomas Gleixner: "A single fix for the perf core where a value read with READ_ONCE() was checked and then reread which makes all the checks invalid. Reuse the already read value instead" * tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: events: Reuse value read using READ_ONCE instead of re-reading it 19 September 2021, 20:22:40 UTC
f5e29a2 Linus Torvalds 19 September 2021, 20:11:19 UTC Merge tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "A set of updates for the RT specific reader/writer locking base code: - Make the fast path reader ordering guarantees correct. - Code reshuffling to make the fix simpler" [ This plays ugly games with atomic_add_return_release() because we don't have a plain atomic_add_release(), and should really be cleaned up, I think - Linus ] * tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwbase: Take care of ordering guarantee for fastpath reader locking/rwbase: Extract __rwbase_write_trylock() locking/rwbase: Properly match set_and_save_state() to restore_state() 19 September 2021, 20:11:19 UTC
62453a4 Linus Torvalds 19 September 2021, 20:00:23 UTC Merge tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix crashes when scv (System Call Vectored) is used to make a syscall when a transaction is active, on Power9 or later. - Fix bad interactions between rfscv (Return-from scv) and Power9 fake-suspend mode. - Fix crashes when handling machine checks in LPARs using the Hash MMU. - Partly revert a recent change to our XICS interrupt controller code, which broke the recently added Microwatt support. Thanks to Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero, Joel Stanley, Nicholas Piggin. * tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/xics: Set the IRQ chip data for the ICS native backend powerpc/mce: Fix access error in mce handler KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers powerpc/64s: system call rfscv workaround for TM bugs selftests/powerpc: Add scv versions of the basic TM syscall tests powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state 19 September 2021, 20:00:23 UTC
2f62996 Linus Torvalds 19 September 2021, 19:55:12 UTC Merge tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix bugs in checkkconfigsymbols.py - Fix missing sys import in gen_compile_commands.py - Fix missing FORCE warning for ARCH=sh builds - Fix -Wignored-optimization-argument warnings for Clang builds - Turn -Wignored-optimization-argument into an error in order to stop building instead of sprinkling warnings * tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS x86/build: Do not add -falign flags unconditionally for clang kbuild: Fix comment typo in scripts/Makefile.modpost sh: Add missing FORCE prerequisites in Makefile gen_compile_commands: fix missing 'sys' package checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit 19 September 2021, 19:55:12 UTC
d94f395 Linus Torvalds 19 September 2021, 19:49:17 UTC Merge tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix ip display in 'perf script' when output type != attr->type. - Ignore deprecation warning when using libbpf'sg btf__get_from_id(), fixing the build with libbpf v0.6+. - Make use of FD() robust in libperf, fixing a segfault with 'perf stat --iostat list'. - Initialize addr_location:srcline pointer to NULL when resolving callchain addresses. - Fix fused instruction logic for assembly functions in 'perf annotate'. * tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf bpf: Ignore deprecation warning when using libbpf's btf__get_from_id() libperf evsel: Make use of FD robust. perf machine: Initialize srcline string member in add_location struct perf script: Fix ip display when type != attr->type perf annotate: Fix fused instr logic for assembly functions 19 September 2021, 19:49:17 UTC
bc1abb9 Linus Torvalds 19 September 2021, 17:49:42 UTC dmascc: use proper 'virt_to_bus()' rather than casting to 'int' The old dmascc driver depends on the legacy ISA_DMA_API, and blindly just casts the kernel virtual address to 'int' for set_dma_addr(). That works only incidentally, and because the high bits of the address will be ignored anyway. And on 64-bit architectures it causes warnings. Admittedly, 64-bit architectures with ISA are basically dead - I think the only example of this is alpha, and nobody would ever use the dmascc driver there. But hey, the fix is easy enough, the end result is cleaner, and it's yet another configuration that now builds without warnings. If somebody actually uses this driver on an alpha and this fixes it for you, please email me. Because that is just incredibly bizarre. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 September 2021, 17:49:42 UTC
4fef611 Linus Torvalds 19 September 2021, 17:37:00 UTC alpha: enable GENERIC_PCI_IOMAP unconditionally With the previous commit (9caea0007601: "parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled") we can now enable GENERIC_PCI_IOMAP unconditionally on alpha, and if PCI is not enabled we will just get the nice empty helper functions that allow mixed-bus drivers to build. Example driver: the old 3com/3c59x.c driver works with either the PCI or the EISA version of the 3x59x card, but wouldn't build in an EISA-only configuration because of missing pci_iomap() and pci_iounmap() dummy wrappers. Most of the other PCI infrastructure just becomes empty wrappers even without GENERIC_PCI_IOMAP, and it's not obvious that the pci_iomap functionality shouldn't do the same, but this works. Cc: Ulrich Teichert <krypton@ulrich-teichert.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 September 2021, 17:37:00 UTC
9caea00 Helge Deller 19 September 2021, 17:36:09 UTC parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled Linus noticed odd declaration rules for pci_iounmap() in iomap.h and pci_iomap.h, where it dependend on either NO_GENERIC_PCI_IOPORT_MAP or GENERIC_IOMAP when CONFIG_PCI was disabled. Testing on parisc seems to indicate that we need pci_iounmap() only when CONFIG_PCI is enabled, so the declaration of pci_iounmap() can be moved cleanly into pci_iomap.h in sync with the declarations of pci_iomap(). Link: https://lore.kernel.org/all/CAHk-=wjRrh98pZoQ+AzfWmsTZacWxTJKXZ9eKU2X_0+jM=O8nw@mail.gmail.com/ Signed-off-by: Helge Deller <deller@gmx.de> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: 97a29d59fc22 ("[PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional") Cc: Arnd Bergmann <arnd@arndb.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ulrich Teichert <krypton@ulrich-teichert.org> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 September 2021, 17:36:09 UTC
31ad37b Linus Torvalds 19 September 2021, 17:11:53 UTC Revert "drm/vc4: hdmi: Remove drm_encoder->crtc usage" This reverts commit 27da370e0fb343a0baf308f503bb3e5dcdfe3362. Sudip Mukherjee reports that this broke pulseaudio with a NULL pointer dereference in vc4_hdmi_audio_prepare(), bisected it to this commit, and confirmed that a revert fixed the problem. Revert the problematic commit until fixed. Link: https://lore.kernel.org/all/CADVatmPB9-oKd=ypvj25UYysVo6EZhQ6bCM7EvztQBMyiZfAyw@mail.gmail.com/ Link: https://lore.kernel.org/all/CADVatmN5EpRshGEPS_JozbFQRXg5w_8LFB3OMP1Ai-ghxd3w4g@mail.gmail.com/ Reported-and-tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Emma Anholt <emma@anholt.net> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 September 2021, 17:11:53 UTC
b1044a9 Linus Torvalds 19 September 2021, 17:06:46 UTC Revert drm/vc4 hdmi runtime PM changes This reverts commits 9984d6664ce9 ("drm/vc4: hdmi: Make sure the controller is powered in detect") 411efa18e4b0 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm") as Michael Stapelberg reports that the new runtime PM changes cause his Raspberry Pi 3 to hang on boot, probably due to interactions with other changes in the DRM tree (because a bisect points to the merge in commit e058a84bfddc: "Merge tag 'drm-next-2021-07-01' of git://.../drm"). Revert these two commits until it's been resolved. Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/ Reported-and-tested-by: Michael Stapelberg <michael@stapelberg.ch> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 19 September 2021, 17:06:46 UTC
0664684 Nathan Chancellor 16 September 2021, 18:40:17 UTC kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS Similar to commit 589834b3a009 ("kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS"). Clang ignores certain GCC flags that it has not implemented, only emitting a warning: $ echo | clang -fsyntax-only -falign-jumps -x c - clang-14: warning: optimization flag '-falign-jumps' is not supported [-Wignored-optimization-argument] When one of these flags gets added to KBUILD_CFLAGS unconditionally, all subsequent cc-{disable-warning,option} calls fail because -Werror was added to these invocations to turn the above warning and the equivalent -W flag warning into errors. To catch the presence of these flags earlier, turn -Wignored-optimization-argument into an error so that the flags can either be implemented or ignored via cc-option and there are no more weird errors. Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 19 September 2021, 01:55:18 UTC
7fa6a27 Nathan Chancellor 16 September 2021, 18:40:16 UTC x86/build: Do not add -falign flags unconditionally for clang clang does not support -falign-jumps and only recently gained support for -falign-loops. When one of the configuration options that adds these flags is enabled, clang warns and all cc-{disable-warning,option} that follow fail because -Werror gets added to test for the presence of this warning: clang-14: warning: optimization flag '-falign-jumps=0' is not supported [-Wignored-optimization-argument] To resolve this, add a couple of cc-option calls when building with clang; gcc has supported these options since 3.2 so there is no point in testing for their support. -falign-functions was implemented in clang-7, -falign-loops was implemented in clang-14, and -falign-jumps has not been implemented yet. Link: https://lore.kernel.org/r/YSQE2f5teuvKLkON@Ryzen-9-3900X.localdomain/ Link: https://lore.kernel.org/r/20210824022640.2170859-2-nathan@kernel.org/ Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 19 September 2021, 01:35:53 UTC
7c80144 Ramji Jiyani 16 September 2021, 09:21:22 UTC kbuild: Fix comment typo in scripts/Makefile.modpost Change comment "create one <module>.mod.c file pr. module" to "create one <module>.mod.c file per module" Signed-off-by: Ramji Jiyani <ramjiyani@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 19 September 2021, 01:14:19 UTC
4e70b64 Geert Uytterhoeven 16 September 2021, 08:43:53 UTC sh: Add missing FORCE prerequisites in Makefile make: arch/sh/boot/Makefile:87: FORCE prerequisite is missing Add the missing FORCE prerequisites for all build targets identified by "make help". Fixes: e1f86d7b4b2a5213 ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 19 September 2021, 01:13:42 UTC
ec783c7 Kortan 08 September 2021, 03:28:48 UTC gen_compile_commands: fix missing 'sys' package We need to import the 'sys' package since the script has called sys.exit() method. Fixes: 6ad7cbc01527 ("Makefile: Add clang-tidy and static analyzer support to makefile") Signed-off-by: Kortan <kortanzh@gmail.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 19 September 2021, 01:13:03 UTC
aa0f5ea Ariel Marcovitch 01 September 2021, 16:49:52 UTC checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file When parsing Kconfig files to find symbol definitions and references, lines after a 'help' line are skipped until a new config definition starts. However, Kconfig statements can actually be after a help section, as long as these have shallower indentation. These are skipped by the parser. This means that symbols referenced in this kind of statements are ignored by this function and thus are not considered undefined references in case the symbol is not defined. Remove the 'skip' logic entirely, as it is not needed if we just use the STMT regex to find the end of help lines. However, this means that keywords that appear as part of the help message (i.e. with the same indentation as the help lines) it will be considered as a reference/definition. This can happen now as well, but only with REGEX_KCONFIG_DEF lines. Also, the keyword must have a SYMBOL after it, which probably means that someone referenced a config in the help so it seems like a bonus :) The real solution is to keep track of the indentation when a the first help line in encountered and then handle DEF and STMT lines only if the indentation is shallower. Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 19 September 2021, 01:13:03 UTC
d62d5ae Ariel Marcovitch 01 September 2021, 14:52:12 UTC checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit As opposed to the --diff option, --commit can get ref names instead of commit hashes. When using the --commit option, the script resets the working directory to the commit before the given ref, by adding '~' to the end of the ref. However, the 'HEAD' ref is relative, and so when the working directory is reset to 'HEAD~', 'HEAD' points to what was 'HEAD~'. Then when the script resets to 'HEAD' it actually stays in the same commit. In this case, the script won't report any cases because there is no diff between the cases of the two refs. Prevent the user from using HEAD refs. A better solution might be to resolve the refs before doing the reset, but for now just disallow such refs. Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 19 September 2021, 01:13:03 UTC
d4d016c Linus Torvalds 18 September 2021, 21:45:48 UTC alpha: move __udiv_qrnnd library function to arch/alpha/lib/ We already had the implementation for __udiv_qrnnd (unsigned divide for multi-precision arithmetic) as part of the alpha math emulation code. But you can disable the math emulation code - even if you shouldn't - and then the MPI code that actually wants this functionality (and is needed by various crypto functions) will fail to build. So move the extended-precision divide code to be a regular library function, just like all the regular division code is. That way ie is available regardless of math-emulation. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 September 2021, 21:45:48 UTC
ab41f75 Linus Torvalds 18 September 2021, 21:12:39 UTC alpha: mark 'Jensen' platform as no longer broken Ok, it almost certainly is still broken on actual hardware, but the immediate reason for it having been marked BROKEN was a build error that is fixed by just making sure the low-level IO header file is included sufficiently early that the __EXTERN_INLINE hackery takes effect. This was marked broken back in 2017 by commit 1883c9f49d02 ("alpha: mark jensen as broken"), but Ulrich Teichert made me look at it as part of my cross-build work to make sure -Werror actually does the right thing. There are lots of alpha configurations that do not build cleanly, but now it's no longer because Jensen wouldn't be buildable. That said, because the Jensen platform doesn't force PCI to be enabled (Jensen only had EISA), it ends up being somewhat interesting as a source of odd configs. Reported-by: Ulrich Teichert <krypton@ulrich-teichert.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 September 2021, 21:12:39 UTC
219d720 Andrii Nakryiko 14 September 2021, 17:00:04 UTC perf bpf: Ignore deprecation warning when using libbpf's btf__get_from_id() Perf code re-implements libbpf's btf__load_from_kernel_by_id() API as a weak function, presumably to dynamically link against old version of libbpf shared library. Unfortunately this causes compilation warning when perf is compiled against libbpf v0.6+. For now, just ignore deprecation warning, but there might be a better solution, depending on perf's needs. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: kernel-team@fb.com LPU-Reference: 20210914170004.4185659-1-andrii@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 18 September 2021, 20:47:02 UTC
aba5dae Ian Rogers 18 September 2021, 05:44:40 UTC libperf evsel: Make use of FD robust. FD uses xyarray__entry that may return NULL if an index is out of bounds. If NULL is returned then a segv happens as FD unconditionally dereferences the pointer. This was happening in a case of with perf iostat as shown below. The fix is to make FD an "int*" rather than an int and handle the NULL case as either invalid input or a closed fd. $ sudo gdb --args perf stat --iostat list ... Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 50 { (gdb) bt #0 perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50 #1 0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410, threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792 #2 0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0) at util/evsel.c:2045 #3 0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0) at util/evsel.c:2065 #4 0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0, config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590 #5 0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:833 #6 0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0) at builtin-stat.c:1048 #7 0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534 #8 0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3, argv=0x7fffffffe4a0) at perf.c:313 #9 0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365 #10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409 #11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539 ... (gdb) c Continuing. Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. Program received signal SIGSEGV, Segmentation fault. 0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166 166 if (FD(evsel, cpu, thread) >= 0) v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was backward. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210918054440.2350466-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 18 September 2021, 20:43:06 UTC
57f0ff0 Michael Petlan 19 July 2021, 14:53:32 UTC perf machine: Initialize srcline string member in add_location struct It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06a509e, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <mpetlan@redhat.com> CC: Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Fixes: 1fb7d06a509e ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com Reported-by: Juri Lelli <jlelli@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 18 September 2021, 20:43:05 UTC
ff6f41f Adrian Hunter 11 September 2021, 13:30:53 UTC perf script: Fix ip display when type != attr->type set_print_ip_opts() was not being called when type != attr->type because there is not a one-to-one relationship between output types and attr->type. That resulted in ip not printing. The attr_type() function is removed, and the match of attr->type to output type is corrected. Example on ADL using taskset to select an atom cpu: # perf record -e cpu_atom/cpu-cycles/ taskset 0x1000 uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.003 MB perf.data (7 samples) ] Before: # perf script | head taskset 428 [-01] 10394.179041: 1 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179043: 1 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179044: 11 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179045: 407 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179046: 16789 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179052: 676300 cpu_atom/cpu-cycles/: uname 428 [-01] 10394.179278: 4079859 cpu_atom/cpu-cycles/: After: # perf script | head taskset 428 10394.179041: 1 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179043: 1 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179044: 11 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179045: 407 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179046: 16789 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179052: 676300 cpu_atom/cpu-cycles/: 7f829ef73800 cfree+0x0 (/lib/libc-2.32.so) uname 428 10394.179278: 4079859 cpu_atom/cpu-cycles/: ffffffff95bae912 vma_interval_tree_remove+0x1f2 ([kernel.kallsyms]) Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20210911133053.15682-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 18 September 2021, 20:43:05 UTC
7efbcc8 Ravi Bangoria 11 September 2021, 04:38:53 UTC perf annotate: Fix fused instr logic for assembly functions Some x86 microarchitectures fuse a subset of cmp/test/ALU instructions with branch instructions, and thus perf annotate highlight such valid pairs as fused. When annotated with source, perf uses struct disasm_line to contain either source or instruction line from objdump output. Usually, a C statement generates multiple instructions which include such cmp/test/ALU + branch instruction pairs. But in case of assembly function, each individual assembly source line generate one instruction. The 'perf annotate' instruction fusion logic assumes the previous disasm_line as the previous instruction line, which is wrong because, for assembly function, previous disasm_line contains source line. And thus perf fails to highlight valid fused instruction pairs for assembly functions. Fix it by searching backward until we find an instruction line and consider that disasm_line as fused with current branch instruction. Before: │ cmpq %rcx, RIP+8(%rsp) 0.00 │ cmp %rcx,0x88(%rsp) │ je .Lerror_bad_iret <--- Source line 0.14 │ ┌──je b4 <--- Instruction line │ │movl %ecx, %eax After: │ cmpq %rcx, RIP+8(%rsp) 0.00 │ ┌──cmp %rcx,0x88(%rsp) │ │je .Lerror_bad_iret 0.14 │ ├──je b4 │ │movl %ecx, %eax Reviewed-by: Jin Yao <yao.jin@linux.intel.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https //lore.kernel.org/r/20210911043854.8373-1-ravi.bangoria@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 18 September 2021, 20:43:05 UTC
93ff9f1 Linus Torvalds 18 September 2021, 19:46:14 UTC Merge tag 's390-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix potential out-of-range access during secure boot facility detection. - Fully validate the VMA before calling follow_pte() in pci code. - Remove arch specific WARN_DYNAMIC_STACK config option. - Fix zcrypto kernel doc comments. - Update defconfigs. * tag 's390-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: remove WARN_DYNAMIC_STACK s390/ap: fix kernel doc comments s390: update defconfigs s390/sclp: fix Secure-IPL facility detection s390/pci_mmio: fully validate the VMA before calling follow_pte() 18 September 2021, 19:46:14 UTC
d1a8869 Linus Torvalds 18 September 2021, 19:40:55 UTC Merge tag 'devicetree-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Revert fw_devlink tracking 'phy-handle' links. This broke at least a few platforms. A better solution is being worked on. - Add Samsung UFS binding which fell thru the cracks - Doc reference fixes from Mauro - Fix for restricted DMA error handling * tag 'devicetree-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: arm: Fix Toradex compatible typo of: restricted dma: Fix condition for rmem init dt-bindings: arm: mediatek: mmsys: update mediatek,mmsys.yaml reference dt-bindings: net: dsa: sja1105: update nxp,sja1105.yaml reference dt-bindings: ufs: Add bindings for Samsung ufs host Revert "of: property: fw_devlink: Add support for "phy-handle" property" 18 September 2021, 19:40:55 UTC
cd395d5 Linus Torvalds 18 September 2021, 18:15:01 UTC tgafb: clarify dependencies The TGA boards were based on the DECchip 21030 PCI graphics accelerator used mainly for alpha, and existed in a TURBOchannel (TC) version for the DECstation (MIPS) workstations. However, the config option for the TGA code is a bit confused, and says depends on FB && (ALPHA || TC) because people didn't really want to enable the option for random PCI environments, so the "ALPHA" stands in for that case (while the TC case is then the MIPS DECstation case). So that config dependency is kind of a mixture of architecture and bus choices. But it's incorrect, in that there were non-PCI-based alpha hardware, and then the driver just causes warnings: drivers/video/fbdev/tgafb.c:1532:13: error: ‘tgafb_unregister’ defined but not used [-Werror=unused-function] 1532 | static void tgafb_unregister(struct device *dev) | ^~~~~~~~~~~~~~~~ drivers/video/fbdev/tgafb.c:1387:12: error: ‘tgafb_register’ defined but not used [-Werror=unused-function] 1387 | static int tgafb_register(struct device *dev) | ^~~~~~~~~~~~~~ so let's make the config option dependencies a bit more explict: depends on FB depends on PCI || TC depends on ALPHA || TC where that first "FB" is the software configuration dependency, the second "PCI || TC" is the hardware bus dependency, while that final "ALPHA || TC" dependency is the "don't bother asking except for these situations. We could make that third case have "COMPILE_TEST" as an option, and mark the register/unregister functions as __maybe_unused, but I'm not sure it's really worth it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 September 2021, 18:15:01 UTC
cc9d3aa Linus Torvalds 18 September 2021, 17:57:10 UTC alpha: make 'Jensen' IO functions build again The Jensen IO functions are overly copmplicated because some of the IO addresses refer to special 'local IO' ports, and they get accessed differently. That then makes gcc not actually inline them, and since they were marked "extern inline" when included through the regular <asm/io.h> path, and then only marked "inline" when included from sys_jensen.c, you never necessarily got a body for the IO functions at all. The intent of the sys_jensen.c code is to actually get the non-inlined copy generated, so remove the 'inline' from the magic macro that is supposed to sort this all out. Also, do not mix 'extern inline' functions (that may or may not be inlined and will not generate a function body if they are not) with 'static inline' (that _will_ generate a function body when not inlined). Because gcc will complain about this situation: error: ‘jensen_bus_outb’ is static but used in inline function ‘jensen_outb’ which is not static because gcc basically doesn't know whether to generate a body for that static inline function or not for that call site. So make all of these use that __EXTERN_INLINE marker. Gcc will generally not inline these things on use, and then generate the function body out-of-line in sys_jensen.c. This makes the core IO functions build for the alpha Jensen config. Not that the rest then builds, because it turns out Jensen also doesn't enable PCI, which then makes other drievrs very unhappy, but that's a separate issue. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 September 2021, 17:57:10 UTC
efafec2 Linus Torvalds 18 September 2021, 17:05:06 UTC spi: Fix tegra20 build with CONFIG_PM=n Without CONFIG_PM enabled, the SET_RUNTIME_PM_OPS() macro ends up being empty, and the only use of tegra_slink_runtime_{resume,suspend} goes away, resulting in drivers/spi/spi-tegra20-slink.c:1200:12: error: ‘tegra_slink_runtime_resume’ defined but not used [-Werror=unused-function] 1200 | static int tegra_slink_runtime_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/spi/spi-tegra20-slink.c:1188:12: error: ‘tegra_slink_runtime_suspend’ defined but not used [-Werror=unused-function] 1188 | static int tegra_slink_runtime_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ mark the functions __maybe_unused to make the build happy. This hits the alpha allmodconfig build (and others). Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 18 September 2021, 17:05:06 UTC
55c21d5 David Heidelberg 12 September 2021, 16:51:20 UTC dt-bindings: arm: Fix Toradex compatible typo Fix board compatible typo reported by dtbs_check. Fixes: f4d1577e9bc6 ("dt-bindings: arm: Convert Tegra board/soc bindings to json-schema") Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20210912165120.188490-1-david@ixit.cz Signed-off-by: Rob Herring <robh@kernel.org> 17 September 2021, 21:02:41 UTC
31c8025 David Brazdil 17 September 2021, 13:14:23 UTC of: restricted dma: Fix condition for rmem init of_dma_set_restricted_buffer fails to handle negative return values from of_property_count_elems_of_size, e.g. when the property does not exist. This results in an attempt to assign a non-existent reserved memory region to the device and a warning being printed. Fix the condition to take negative values into account. Fixes: f3cfd136aef0 ("of: restricted dma: Don't fail device probe on rmem init failure") Cc: Will Deacon <will@kernel.org> Signed-off-by: David Brazdil <dbrazdil@google.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210917131423.2760155-1-dbrazdil@google.com Signed-off-by: Rob Herring <robh@kernel.org> 17 September 2021, 20:58:09 UTC
4357f03 Linus Torvalds 17 September 2021, 19:05:04 UTC Merge tag 'pm-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix two cpufreq issues, one in the intel_pstate driver and one in the core. Specifics: - Prevent intel_pstate from avoiding to use HWP, even if instructed to do so via the kernel command line, when HWP has been enabled already by the platform firmware (Doug Smythies). - Prevent use-after-free from occurring in the schedutil cpufreq governor on exit by fixing a core helper function that attempts to access memory associated with a kobject after calling kobject_put() on it (James Morse)" * tag 'pm-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: schedutil: Destroy mutex before kobject_put() frees the memory cpufreq: intel_pstate: Override parameters if HWP forced by BIOS 17 September 2021, 19:05:04 UTC
b9b11b1 Linus Torvalds 17 September 2021, 18:54:48 UTC Merge tag 'dma-mapping-5.15-1' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - page align size in sparc32 arch_dma_alloc (Andreas Larsson) - tone down a new dma-debug message (Hamza Mahfooz) - fix the kerneldoc for dma_map_sg_attrs (me) * tag 'dma-mapping-5.15-1' of git://git.infradead.org/users/hch/dma-mapping: sparc32: page align size in arch_dma_alloc dma-debug: prevent an error message from causing runtime problems dma-mapping: fix the kerneldoc for dma_map_sg_attrs 17 September 2021, 18:54:48 UTC
7639afa Linus Torvalds 17 September 2021, 18:42:31 UTC Merge tag 'pci-v5.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Defer VPD sizing until we actually need the contents; fixes a boot-time slowdown reported by Dave Jones (Bjorn Helgaas) - Stop clobbering OF fwnodes when we look for an ACPI fwnode; fixes a virtio-iommu boot regression (Jean-Philippe Brucker) - Add AMD GPU multi-function power dependencies; fixes runtime power management, including GPU resume and temp and fan sensor issues (Evan Quan) - Update VMD maintainer to Nirmal Patel (Jon Derrick) * tag 'pci-v5.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Add Nirmal Patel as VMD maintainer PCI: Add AMD GPU multi-function power dependencies PCI/ACPI: Don't reset a fwnode set by OF PCI/VPD: Defer VPD sizing until first access 17 September 2021, 18:42:31 UTC
ddf21bd Linus Torvalds 17 September 2021, 16:23:44 UTC Merge tag 'iov_iter.3-5.15-2021-09-17' of git://git.kernel.dk/linux-block Pull io_uring iov_iter retry fixes from Jens Axboe: "This adds a helper to save/restore iov_iter state, and modifies io_uring to use it. After that is done, we can now kill the iter->truncated addition that we added for this release. The io_uring change is being overly cautious with the save/restore/advance, but better safe than sorry and we can always improve that and reduce the overhead if it proves to be of concern. The only case to be worried about in this regard is huge IO, where iteration can take a while to iterate segments. I spent some time writing test cases, and expanded the coverage quite a bit from the last posting of this. liburing carries this regression test case now: https://git.kernel.dk/cgit/liburing/tree/test/file-verify.c which exercises all of this. It now also supports provided buffers, and explicitly tests for end-of-file/device truncation as well. On top of that, Pavel sanitized the IOPOLL retry path to follow the exact same pattern as normal IO" * tag 'iov_iter.3-5.15-2021-09-17' of git://git.kernel.dk/linux-block: io_uring: move iopoll reissue into regular IO path Revert "iov_iter: track truncated size" io_uring: use iov_iter state save/restore helpers iov_iter: add helper to save iov_iter state 17 September 2021, 16:23:44 UTC
0bc7eb0 Linus Torvalds 17 September 2021, 16:19:59 UTC Merge tag 'io_uring-5.15-2021-09-17' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: "Mostly fixes for regressions in this cycle, but also a few fixes that predate this release. The odd one out is a tweak to the direct files added in this release, where attempting to reuse a slot is allowed instead of needing an explicit removal of that slot first. It's a considerable improvement in usability to that API, hence I'm sending it for -rc2. - io-wq race fix and cleanup (Hao) - loop_rw_iter() type fix - SQPOLL max worker race fix - Allow poll arm for O_NONBLOCK files, fixing a case where it's impossible to properly use io_uring if you cannot modify the file flags - Allow direct open to simply reuse a slot, instead of needing it explicitly removed first (Pavel) - Fix a case where we missed signal mask restoring in cqring_wait, if we hit -EFAULT (Xiaoguang)" * tag 'io_uring-5.15-2021-09-17' of git://git.kernel.dk/linux-block: io_uring: allow retry for O_NONBLOCK if async is supported io_uring: auto-removal for direct open/accept io_uring: fix missing sigmask restore in io_cqring_wait() io_uring: pin SQPOLL data before unlocking ring lock io-wq: provide IO_WQ_* constants for IORING_REGISTER_IOWQ_MAX_WORKERS arg items io-wq: fix potential race of acct->nr_workers io-wq: code clean of io_wqe_create_worker() io_uring: ensure symmetry in handling iter types in loop_rw_iter() 17 September 2021, 16:19:59 UTC
36d6753 Linus Torvalds 17 September 2021, 16:16:59 UTC Merge tag 'block-5.15-2021-09-17' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - NVMe pull request via Christoph: - fix ANA state updates when a namespace is not present (Anton Eidelman) - nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show (Dan Carpenter) - avoid race in shutdown namespace removal (Daniel Wagner) - fix io_work priority inversion in nvme-tcp (Keith Busch) - destroy cm id before destroy qp to avoid use after free (Ruozhu Li) - blk-integrity profile registration fixes (Christoph, Lihong) - blk-cgroup UAF fix (Li) - blk-mq tag iterator fix (Ming) - blkcg memory leak fix (Yanfei) * tag 'block-5.15-2021-09-17' of git://git.kernel.dk/linux-block: blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd blkcg: fix memory leak in blk_iolatency_init nvme: remove the call to nvme_update_disk_info in nvme_ns_remove block: flush the integrity workqueue in blk_integrity_unregister block: check if a profile is actually registered in blk_integrity_unregister nvme-tcp: fix io_work priority inversion nvme-rdma: destroy cm id before destroy qp to avoid use after free nvme-multipath: fix ANA state updates when a namespace is not present nvme: avoid race in shutdown namespace removal nvmet: fix a width vs precision bug in nvmet_subsys_attr_serial_show() blk-mq: avoid to iterate over stale request 17 September 2021, 16:16:59 UTC
7f2cd14 Linus Torvalds 17 September 2021, 15:59:27 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes and cleanups from Catalin Marinas: - Fix the memset() size when re-initialising the SVE state. - Mark __stack_chk_guard as __ro_after_init. - Remove duplicate include. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Mark __stack_chk_guard as __ro_after_init arm64/kernel: remove duplicate include in process.c arm64/sve: Use correct size when reinitialising SVE state 17 September 2021, 15:59:27 UTC
c6460da Linus Torvalds 17 September 2021, 15:31:49 UTC Merge tag 'for-linus-5.15b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - The first hunk of a Xen swiotlb fixup series fixing multiple minor issues and doing some small cleanups - Some further Xen related fixes avoiding WARN() splats when running as Xen guests or dom0 - A Kconfig fix allowing the pvcalls frontend to be built as a module * tag 'for-linus-5.15b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: swiotlb-xen: drop DEFAULT_NSLABS swiotlb-xen: arrange to have buffer info logged swiotlb-xen: drop leftover __ref swiotlb-xen: limit init retries swiotlb-xen: suppress certain init retries swiotlb-xen: maintain slab count properly swiotlb-xen: fix late init retry swiotlb-xen: avoid double free xen/pvcalls: backend can be a module xen: fix usage of pmd_populate in mremap for pv guests xen: reset legacy rtc flag for PV domU PM: base: power: don't try to use non-existing RTC for storing data xen/balloon: use a kernel thread instead a workqueue 17 September 2021, 15:31:49 UTC
c8087ad Mauro Carvalho Chehab 16 September 2021, 09:55:02 UTC dt-bindings: arm: mediatek: mmsys: update mediatek,mmsys.yaml reference Changeset cba3c40d1f97 ("dt-bindings: arm: mediatek: mmsys: convert to YAML format") renamed: Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt to: Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml. Update its cross-reference accordingly. Fixes: cba3c40d1f97 ("dt-bindings: arm: mediatek: mmsys: convert to YAML format") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/a87eb079a73e8ab41cdf6e40e80b1d1f868da6bd.1631785820.git.mchehab+huawei@kernel.org 17 September 2021, 02:01:43 UTC
a11de92 Mauro Carvalho Chehab 16 September 2021, 09:55:01 UTC dt-bindings: net: dsa: sja1105: update nxp,sja1105.yaml reference Changeset 62568bdbe6f6 ("dt-bindings: net: dsa: sja1105: convert to YAML schema") renamed: Documentation/devicetree/bindings/net/dsa/sja1105.txt to: Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml. Update its cross-reference accordingly. Fixes: 62568bdbe6f6 ("dt-bindings: net: dsa: sja1105: convert to YAML schema") Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/994ce6c6358746ff600459822b9f6e336db933c9.1631785820.git.mchehab+huawei@kernel.org 17 September 2021, 02:01:42 UTC
bdb575f Linus Torvalds 16 September 2021, 20:28:52 UTC Merge tag 'drm-fixes-2021-09-17' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Slightly busier than usual rc2, but mostly scattered amdgpu fixes, some i915 and etnaviv resolves an MMU/runtime PM blowup. amdgpu: - UBSAN fix - Powerplay table update fix - Fix use after free in BO moves - Debugfs init fixes - vblank workqueue fixes for headless devices - FPU fixes - sysfs_emit fixes - SMU updates for cyan skillfish - Backlight fixes when DMCU is not initialized - DP MST fixes - HDCP compliance fix - Link training fix - Runtime pm fix - Panel orientation fixes - Display GPUVM fix for yellow carp - Add missing license amdkfd: - Drop PCI atomics requirement if proper firmware is available - Suspend/resume fixes for IOMMUv2 cases radeon: - AGP fix i915: - Propagate DP link training error returns - Use max link params for eDP 1.3 and earlier - Build warning fixes - Gem selftest fixes - Ensure wakeref is held before hardware access etnaviv: - MMU context vs runtime PM fix" * tag 'drm-fixes-2021-09-17' of git://anongit.freedesktop.org/drm/drm: (44 commits) drm/amdgpu/display: add a proper license to dc_link_dp.c drm/amd/display: Fix white screen page fault for gpuvm amd/display: enable panel orientation quirks drm/amdgpu: Demote TMZ unsupported log message from warning to info drm/amdgpu: Drop inline from amdgpu_ras_eeprom_max_record_count drm/amd/pm: fix runpm hang when amdgpu loaded prior to sound driver drm/radeon: pass drm dev radeon_agp_head_init directly drm/amdgpu: move iommu_resume before ip init/resume drm/amdgpu: add amdgpu_amdkfd_resume_iommu drm/amdkfd: separate kfd_iommu_resume from kfd_resume drm/amd/display: Link training retry fix for abort case drm/amd/display: Fix unstable HPCP compliance on Chrome Barcelo drm/amd/display: dsc mst 2 4K displays go dark with 2 lane HBR3 drm/amd/display: Get backlight from PWM if DMCU is not initialized drm/amdkfd: make needs_pcie_atomics FW-version dependent drm/amdgpu: add manual sclk/vddc setting support for cyan skilfish(v3) drm/amdgpu: add some pptable funcs for cyan skilfish(v3) drm/amdgpu: update SMU driver interface for cyan skilfish(v3) drm/amdgpu: update SMU PPSMC for cyan skilfish drm/amdgpu: fix sysfs_emit/sysfs_emit_at warnings(v2) ... 16 September 2021, 20:28:52 UTC
fc0c054 Linus Torvalds 16 September 2021, 20:05:42 UTC Merge tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - vhost_net: fix OoB on sendmsg() failure - mlx5: bridge, fix uninitialized variable usage - bnxt_en: fix error recovery regression Current release - new code bugs: - bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset() Previous releases - regressions: - r6040: restore MDIO clock frequency after MAC reset - tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() - dsa: flush switchdev workqueue before tearing down CPU/DSA ports Previous releases - always broken: - ptp: dp83640: don't define PAGE0, avoid compiler warning - igc: fix tunnel segmentation offloads - phylink: update SFP selected interface on advertising changes - stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume - mlx5e: fix mutual exclusion between CQE compression and HW TS Misc: - bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode - sfc: fallback for lack of xdp tx queues - hns3: add option to turn off page pool feature" * tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits) mlxbf_gige: clear valid_polarity upon open igc: fix tunnel offloading net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert net: wan: wanxl: define CROSS_COMPILE_M68K selftests: nci: replace unsigned int with int net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports Revert "net: phy: Uniform PHY driver access" net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup ptp: dp83640: don't define PAGE0 bnx2x: Fix enabling network interfaces without VFs Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers"" tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() net-caif: avoid user-triggerable WARN_ON(1) bpf, selftests: Add test case for mixed cgroup v1/v2 bpf, selftests: Add cgroup v1 net_cls classid helpers bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode bpf: Add oversize check before call kvcalloc() net: hns3: fix the timing issue of VF clearing interrupt sources net: hns3: fix the exception when query imp info net: hns3: disable mac in flr process ... 16 September 2021, 20:05:42 UTC
109f7ea Dave Airlie 16 September 2021, 19:58:55 UTC Merge tag 'amd-drm-fixes-5.15-2021-09-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.15-2021-09-16: amdgpu: - UBSAN fix - Powerplay table update fix - Fix use after free in BO moves - Debugfs init fixes - vblank workqueue fixes for headless devices - FPU fixes - sysfs_emit fixes - SMU updates for cyan skillfish - Backlight fixes when DMCU is not initialized - DP MST fixes - HDCP compliance fix - Link training fix - Runtime pm fix - Panel orientation fixes - Display GPUVM fix for yellow carp - Add missing license amdkfd: - Drop PCI atomics requirement if proper firmware is available - Suspend/resume fixes for IOMMUv2 cases radeon: - AGP fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210916140611.59816-1-alexander.deucher@amd.com 16 September 2021, 19:58:55 UTC
11654b3 Dave Airlie 16 September 2021, 19:53:52 UTC Merge tag 'drm-intel-fixes-2021-09-16' of ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes drm/i915 fixes for v5.15-rc2: - Propagate DP link training error returns - Use max link params for eDP 1.3 and earlier - Build warning fixes - Gem selftest fixes - Ensure wakeref is held before hardware access Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8735q4wsu7.fsf@intel.com 16 September 2021, 19:53:53 UTC
3c0d2a4 Guenter Roeck 09 September 2021, 03:57:43 UTC net: 6pack: Fix tx timeout and slot time tx timeout and slot time are currently specified in units of HZ. On Alpha, HZ is defined as 1024. When building alpha:allmodconfig, this results in the following error message. drivers/net/hamradio/6pack.c: In function 'sixpack_open': drivers/net/hamradio/6pack.c:71:41: error: unsigned conversion from 'int' to 'unsigned char' changes value from '256' to '0' In the 6PACK protocol, tx timeout is specified in units of 10 ms and transmitted over the wire: https://www.linux-ax25.org/wiki/6PACK Defining a value dependent on HZ doesn't really make sense, and presumably comes from the (very historical) situation where HZ was originally 100. Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity: mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100); and the SIXP_TXDELAY walue is sent as a byte over the wire. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 September 2021, 19:52:06 UTC
da4ce47 Dave Airlie 16 September 2021, 19:30:56 UTC Merge branch 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux into drm-fixes Fixes a very annoying issue where the driver view of the MMU state gets out of sync with the actual hardware state across a runtime PM cycle, so we end up restarting the GPU with the wrong (potentially already freed) MMU context. Hilarity ensues. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/729a561b6cfed090457bcc856a9e14ed6209fe21.camel@pengutronix.de 16 September 2021, 19:31:07 UTC
040b890 Arnd Bergmann 28 April 2020, 21:31:24 UTC drm/rockchip: cdn-dp-core: Make cdn_dp_core_resume __maybe_unused With the new static annotation, the compiler warns when the functions are actually unused: drivers/gpu/drm/rockchip/cdn-dp-core.c:1123:12: error: 'cdn_dp_resume' defined but not used [-Werror=unused-function] 1123 | static int cdn_dp_resume(struct device *dev) | ^~~~~~~~~~~~~ Mark them __maybe_unused to suppress that warning as well. [ Not so 'new' static annotations any more, and I removed the part of the patch that added __maybe_unused to cdn_dp_suspend(), because it's used by the shutdown/remove code. So only the resume function ends up possibly unused if CONFIG_PM isn't set - Linus ] Fixes: 7c49abb4c2f8 ("drm/rockchip: cdn-dp-core: Make cdn_dp_core_suspend/resume static") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 September 2021, 19:02:33 UTC
b60cee5 Guenter Roeck 09 September 2021, 18:47:14 UTC cpufreq: vexpress: Drop unused variable arm:allmodconfig fails to build with the following error. drivers/cpufreq/vexpress-spc-cpufreq.c:454:13: error: unused variable 'cur_cluster' Remove the unused variable. Fixes: bb8c26d9387f ("cpufreq: vexpress: Set CPUFREQ_IS_COOLING_DEV flag") Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 September 2021, 18:29:27 UTC
35a3f4e Guenter Roeck 09 September 2021, 05:00:33 UTC alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile Some drivers pass a pointer to volatile data to virt_to_bus() and virt_to_phys(), and that works fine. One exception is alpha. This results in a number of compile errors such as drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset': drivers/net/wan/lmc/lmc_main.c:1782:50: error: passing argument 1 of 'virt_to_bus' discards 'volatile' qualifier from pointer target type drivers/atm/ambassador.c: In function 'do_loader_command': drivers/atm/ambassador.c:1747:58: error: passing argument 1 of 'virt_to_bus' discards 'volatile' qualifier from pointer target type Declare the parameter of virt_to_phys and virt_to_bus as pointer to volatile to fix the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 September 2021, 18:27:32 UTC
db71f8f Linus Torvalds 16 September 2021, 18:14:47 UTC 3com 3c515: make it compile on 64-bit architectures This driver isn't enabled most places because of the ISA config dependency, but alpha still has it. And I think the 'Jensen' actually did have an ISA slot. However, it doesn't build cleanly, because the "Vortex bus master" code just casts the skb->data pointer to 'int': outl((int) (skb->data), ioaddr + Wn7_MasterAddr); which is all kinds of broken. Even on a good old traditional PC/AT it would be broken because the high bits will be random kernel address bits, but presumably the hardware ignores those bits. I mean, it's ISA. We're talking 16MB dma limits. The "good old days". Make the build happy with this kind of craziness by using the proper isa_virt_to_bus() handling that the full bus master code uses anyway (the Vortex bus mastering is a limited special case). Who knows, this might even work. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 September 2021, 18:14:47 UTC
5fe983d Linus Torvalds 16 September 2021, 17:32:00 UTC Merge tag 'for-5.15/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "Fix a build warning when using the PAGE0 pointer" * tag 'for-5.15/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Use absolute_pointer() to define PAGE0 16 September 2021, 17:32:00 UTC
077a6cc Linus Torvalds 16 September 2021, 17:26:48 UTC Merge tag 'm68k-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fixes from Geert Uytterhoeven: - Warning fixes to mitigate CONFIG_WERROR=y * tag 'm68k-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: mvme: Remove overdue #warnings in RTC handling m68k: Double cast io functions to unsigned long 16 September 2021, 17:26:48 UTC
9fcb2e9 Dan Li 14 September 2021, 09:44:02 UTC arm64: Mark __stack_chk_guard as __ro_after_init __stack_chk_guard is setup once while init stage and never changed after that. Although the modification of this variable at runtime will usually cause the kernel to crash (so does the attacker), it should be marked as __ro_after_init, and it should not affect performance if it is placed in the ro_after_init section. Signed-off-by: Dan Li <ashimida@linux.alibaba.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/1631612642-102881-1-git-send-email-ashimida@linux.alibaba.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 16 September 2021, 16:59:17 UTC
861dc4f Lv Ruyi 02 September 2021, 01:11:26 UTC arm64/kernel: remove duplicate include in process.c Remove all but the first include of linux/sched.h from process.c Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20210902011126.29828-1-lv.ruyi@zte.com.cn Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 16 September 2021, 16:46:49 UTC
e35ac9d Mark Brown 09 September 2021, 16:53:56 UTC arm64/sve: Use correct size when reinitialising SVE state When we need a buffer for SVE register state we call sve_alloc() to make sure that one is there. In order to avoid repeated allocations and frees we keep the buffer around unless we change vector length and just memset() it to ensure a clean register state. The function that deals with this takes the task to operate on as an argument, however in the case where we do a memset() we initialise using the SVE state size for the current task rather than the task passed as an argument. This is only an issue in the case where we are setting the register state for a task via ptrace and the task being configured has a different vector length to the task tracing it. In the case where the buffer is larger in the traced process we will leak old state from the traced process to itself, in the case where the buffer is smaller in the traced process we will overflow the buffer and corrupt memory. Fixes: bc0ee4760364 ("arm64/sve: Core task context handling") Cc: <stable@vger.kernel.org> # 4.15.x Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210909165356.10675-1-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 16 September 2021, 16:34:46 UTC
e22e509 Alim Akhtar 15 September 2021, 11:18:44 UTC dt-bindings: ufs: Add bindings for Samsung ufs host This patch adds DT bindings for Samsung ufs hci Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20210915111844.42752-1-chanho61.park@samsung.com Signed-off-by: Rob Herring <robh@kernel.org> 16 September 2021, 14:58:28 UTC
92554cb Alex Deucher 14 September 2021, 14:50:47 UTC drm/amdgpu/display: add a proper license to dc_link_dp.c Was missing. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:24 UTC
a709398 Nicholas Kazlauskas 13 September 2021, 18:56:44 UTC drm/amd/display: Fix white screen page fault for gpuvm [Why] The "base_addr_is_mc_addr" field was added for dcn3.1 support but pa_config was never updated to set it to false. Uninitialized memory causes it to be set to true which results in address mistranslation and white screen. [How] Use memset to ensure all fields are initialized to 0 by default. Fixes: 64b1d0e8d500 ("drm/amd/display: Add DCN3.1 HWSEQ") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 16 September 2021, 13:56:24 UTC
cd51a57 Simon Ser 10 September 2021, 15:37:41 UTC amd/display: enable panel orientation quirks This patch allows panel orientation quirks from DRM core to be used. They attach a DRM connector property "panel orientation" which indicates in which direction the panel has been mounted. Some machines have the internal screen mounted with a rotation. Since the panel orientation quirks need the native mode from the EDID, check for it in amdgpu_dm_connector_ddc_get_modes. Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:24 UTC
b287e49 Paul Menzel 13 September 2021, 08:34:11 UTC drm/amdgpu: Demote TMZ unsupported log message from warning to info As the user cannot do anything about the unsupported Trusted Memory Zone (TMZ) feature, do not warn about it, but make it informational, so demote the log level from warning to info. Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:24 UTC
114518f Michel Dänzer 09 September 2021, 16:56:28 UTC drm/amdgpu: Drop inline from amdgpu_ras_eeprom_max_record_count This was unusual; normally, inline functions are declared static as well, and defined in a header file if used by multiple compilation units. The latter would be more involved in this case, so just drop the inline declaration for now. Fixes compile failure building for ppc64le on RHEL 8: In file included from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h:32, from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:33: ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_recovery_init’: ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.h:90:17: error: inlining failed in call to ‘always_inline’ ‘amdgpu_ras_eeprom_max_record_count’: function body not available 90 | inline uint32_t amdgpu_ras_eeprom_max_record_count(void); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1985:34: note: called from here 1985 | max_eeprom_records_len = amdgpu_ras_eeprom_max_record_count(); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fixes: c84d46707ebb "drm/amdgpu: validate bad page threshold in ras(v3)" Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:24 UTC
8b514e8 Evan Quan 09 September 2021, 03:01:00 UTC drm/amd/pm: fix runpm hang when amdgpu loaded prior to sound driver Current RUNPM mechanism relies on PMFW to master the timing for BACO in/exit. And that needs cooperation from sound driver for dstate change notification for function 1(audio). Otherwise(on sound driver missing), BACO cannot be kicked in correctly and hang will be observed on RUNPM exit. By switching back to legacy message way on sound driver missing, we are able to fix the runpm hang observed for the scenario below: amdgpu driver loaded -> runpm suspend kicked -> sound driver loaded Signed-off-by: Evan Quan <evan.quan@amd.com> Reported-and-tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 16 September 2021, 13:56:24 UTC
93def70 Nirmoy Das 13 September 2021, 08:08:23 UTC drm/radeon: pass drm dev radeon_agp_head_init directly Pass drm dev directly as rdev->ddev gets initialized later on at radeon_device_init(). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214375 Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 16 September 2021, 13:56:24 UTC
f02abeb James Zhu 07 September 2021, 15:32:22 UTC drm/amdgpu: move iommu_resume before ip init/resume Separate iommu_resume from kfd_resume, and move it before other amdgpu ip init/resume. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277 Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 16 September 2021, 13:56:24 UTC
8066008 James Zhu 07 September 2021, 15:27:31 UTC drm/amdgpu: add amdgpu_amdkfd_resume_iommu Add amdgpu_amdkfd_resume_iommu for amdgpu. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277 Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 16 September 2021, 13:56:24 UTC
fefc01f James Zhu 07 September 2021, 15:13:02 UTC drm/amdkfd: separate kfd_iommu_resume from kfd_resume Separate kfd_iommu_resume from kfd_resume for fine-tuning of amdgpu device init/resume/reset/recovery sequence. v2: squash in fix for !CONFIG_HSA_AMD Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277 Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 16 September 2021, 13:56:24 UTC
71ae309 Meenakshikumar Somasundaram 30 August 2021, 18:01:10 UTC drm/amd/display: Link training retry fix for abort case [Why] If link training is aborted, it shall be retried if sink is present. [How] Check hpd status to find out whether sink is present or not. If sink is present, then link training shall be tried again with same settings. Otherwise, link training shall be aborted. Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:24 UTC
4e00a43 Qingqing Zhuo 27 August 2021, 10:58:38 UTC drm/amd/display: Fix unstable HPCP compliance on Chrome Barcelo [Why] Intermittently, there presents two occurrences of 0 stream commits in a single HPD event. Current HDCP sequence does not consider such scenerio, and will thus disable HDCP. [How] Add condition check to include stream remove and re-enable case for HDCP enable. Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:24 UTC
90517c9 Hersen Wu 25 August 2021, 20:27:47 UTC drm/amd/display: dsc mst 2 4K displays go dark with 2 lane HBR3 [Why] call stack of amdgpu dsc mst pbn, slot num calculation is as below: -compute_bpp_x16_from_target_bandwidth -decide_dsc_target_bpp_x16 -setup_dsc_config -dc_dsc_compute_bandwidth_range -compute_mst_dsc_configs_for_link -compute_mst_dsc_configs_for_state from pbn -> dsc target bpp_x16 bpp_x16 is calulated by compute_bpp_x16_from_target_bandwidth. Beside pixel clock and bpp, num_slices_h and bpp_increment_div will also affect bpp_x16. from dsc target bpp_x16 -> pbn within dm_update_mst_vcpi_slots_for_dsc, pbn = drm_dp_calc_pbn_mode(clock, bpp_x16, true); drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc) { return DIV_ROUND_UP_ULL(mul_u32_u32(clock * (bpp / 16), 64 * 1006), 8 * 54 * 1000 * 1000); } bpp / 16 trunc digits after decimal point. This will cause calculation delta. drm_dp_calc_pbn_mode does not have other informations, like num_slices_h, bpp_increment_div. therefore, it does not do revese calcuation properly from bpp_x16 to pbn. pbn from drm_dp_calc_pbn_mode is less than pbn from compute_mst_dsc_configs_for_state. This cause not enough mst slot allocated to display. display could not visually light up. [How] pass pbn from compute_mst_dsc_configs_for_state to dm_update_mst_vcpi_slots_for_dsc Cc: stable@vger.kernel.org Reviewed-by: Scott Foster <Scott.Foster@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Hersen Wu <hersenwu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:23 UTC
9987fbb Harry Wentland 16 August 2021, 19:57:12 UTC drm/amd/display: Get backlight from PWM if DMCU is not initialized On Carrizo/Stoney systems we set backlight through panel_cntl, i.e. directly via the PWM registers, if DMCU is not initialized. We always read it back through ABM registers which leads to a mismatch and forces atomic_commit to program the backlight each time. Instead make sure we use the same logic for backlight readback, i.e. read it from panel_cntl if DMCU is not initialized. We also need to remove some extraneous and incorrect calculations at the end of dce_get_16_bit_backlight_from_pwm. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1666 Cc: stable@vger.kernel.org Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:23 UTC
fb932df Felix Kuehling 31 August 2021, 21:42:15 UTC drm/amdkfd: make needs_pcie_atomics FW-version dependent On some GPUs the PCIe atomic requirement for KFD depends on the MEC firmware version. Add a firmware version check for this. The minimum firmware version that works without atomics can be updated in the device_info structure for each GPU type. Move PCIe atomic detection from kgd2kfd_probe into kgd2kfd_device_init because the MEC firmware is not loaded yet at the probe stage. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:23 UTC
abd0a16 Lang Yu 27 August 2021, 07:20:51 UTC drm/amdgpu: add manual sclk/vddc setting support for cyan skilfish(v3) Add manual sclk/vddc setting supoort via pp_od_clk_voltage sysfs to maintain consistency with other asics. As cyan skillfish doesn't support DPM, there is only a single frequency and voltage to adjust. v2: maintain consistency and add command guide. v3: adjust user settings storage and coding style. Command guide: echo vc point sclk vddc > pp_od_clk_voltage "vc" - sclk voltage curve "point" - must be 0 "sclk" - target value of sclk(MHz), should be in safe range "vddc" - target value of vddc(mV), a 6.25(mV) stepping is recommended and should be in safe range (the real vddc is an approximation of target value) echo c > pp_od_clk_voltage "c" - commit the changes of sclk and vddc, only after the commit command, the target values set by "vc" command will take effect echo r > pp_od_clk_voltage "r" - reset sclk and vddc to default value, a subsequent commit command is needed to take effect Example: 1) Check default sclk and vddc $ cat pp_od_clk_voltage OD_SCLK: 0: 1800Mhz * OD_VDDC: 0: 862mV * OD_RANGE: SCLK: 1000Mhz 2000Mhz VDDC: 700mV 1129mV 2) Set sclk to 1500MHz and vddc to 700mV $ echo vc 0 1500 700 > pp_od_clk_voltage $ echo c > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 1500Mhz * OD_VDDC: 0: 693mV * OD_RANGE: SCLK: 1000Mhz 2000Mhz VDDC: 700mV 1129mV 3) Reset sclk and vddc to default $ echo r > pp_od_clk_voltage $ echo c > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 1800Mhz * OD_VDDC: 0: 874mV * OD_RANGE: SCLK: 1000Mhz 2000Mhz VDDC: 700mV 1129mV NOTE: We don't specify an explicit safe range, you can set any values between min and max at your own risk. Enjoy! Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:23 UTC
3061fe9 Lang Yu 27 August 2021, 07:03:50 UTC drm/amdgpu: add some pptable funcs for cyan skilfish(v3) Add print_clk_levels and read_sensor pptable funcs for cyan skilfish. v2: keep consitency and add get_gpu_metrics callback. v3: use sysfs_emit_at() in sysfs show function. Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:23 UTC
c007e17 Lang Yu 27 August 2021, 06:16:31 UTC drm/amdgpu: update SMU driver interface for cyan skilfish(v3) Add SmuMetrics_t definition for cyan skilfish. v2: update SmuMetrics_t definition. v3: cleanup and rearrange the order of fields. Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:23 UTC
8492d3a Lang Yu 24 August 2021, 09:02:57 UTC drm/amdgpu: update SMU PPSMC for cyan skilfish Add some PPSMC MSGs for cyan skilfish. Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:23 UTC
8f48ba3 Lang Yu 08 September 2021, 05:34:26 UTC drm/amdgpu: fix sysfs_emit/sysfs_emit_at warnings(v2) sysfs_emit and sysfs_emit_at requrie a page boundary aligned buf address. Make them happy! v2: use an inline function. Warning Log: [ 492.545174] invalid sysfs_emit_at: buf:00000000f19bdfde at:0 [ 492.546416] WARNING: CPU: 7 PID: 1304 at fs/sysfs/file.c:765 sysfs_emit_at+0x4a/0xa0 [ 492.654805] Call Trace: [ 492.655353] ? smu_cmn_get_metrics_table+0x40/0x50 [amdgpu] [ 492.656780] vangogh_print_clk_levels+0x369/0x410 [amdgpu] [ 492.658245] vangogh_common_print_clk_levels+0x77/0x80 [amdgpu] [ 492.659733] ? preempt_schedule_common+0x18/0x30 [ 492.660713] smu_print_ppclk_levels+0x65/0x90 [amdgpu] [ 492.662107] amdgpu_get_pp_od_clk_voltage+0x13d/0x190 [amdgpu] [ 492.663620] dev_attr_show+0x1d/0x40 Signed-off-by: Lang Yu <lang.yu@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:23 UTC
2a54d11 Anson Jacob 09 September 2021, 16:48:29 UTC drm/amd/display: dc_assert_fp_enabled assert only if FPU is not enabled Assert only when FPU is not enabled. Fixes: 0ea7ee821701 ("drm/amd/display: Add DC_FP helper to check FPU state") Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:23 UTC
b3a7b26 Nicholas Kazlauskas 07 September 2021, 13:53:03 UTC drm/amd/display: Add NULL checks for vblank workqueue [Why] If we're running a headless config with 0 links then the vblank workqueue will be NULL - causing a NULL pointer exception during any commit. [How] Guard access to the workqueue if it's NULL and don't queue or flush work if it is. Reported-by: Mike Lothian <mike@fireburn.co.uk> BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1700 Fixes: 58aa1c50e5a231 ("drm/amd/display: Use vblank control events for PSR enable/disable") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 16 September 2021, 13:56:23 UTC
ee8a960 David Thompson 15 September 2021, 18:08:48 UTC mlxbf_gige: clear valid_polarity upon open The network interface managed by the mlxbf_gige driver can get into a problem state where traffic does not flow. In this state, the interface will be up and enabled, but will stop processing received packets. This problem state will happen if three specific conditions occur: 1) driver has received more than (N * RxRingSize) packets but less than (N+1 * RxRingSize) packets, where N is an odd number Note: the command "ethtool -g <interface>" will display the current receive ring size, which currently defaults to 128 2) the driver's interface was disabled via "ifconfig oob_net0 down" during the window described in #1. 3) the driver's interface is re-enabled via "ifconfig oob_net0 up" This patch ensures that the driver's "valid_polarity" field is cleared during the open() method so that it always matches the receive polarity used by hardware. Without this fix, the driver needs to be unloaded and reloaded to correct this problem state. Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver") Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: David Thompson <davthompson@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 September 2021, 13:31:58 UTC
40ee363 Paolo Abeni 15 September 2021, 17:19:07 UTC igc: fix tunnel offloading Checking tunnel offloading, it turns out that offloading doesn't work as expected. The following script allows to reproduce the issue. Call it as `testscript DEVICE LOCALIP REMOTEIP NETMASK' === SNIP === if [ $# -ne 4 ] then echo "Usage $0 DEVICE LOCALIP REMOTEIP NETMASK" exit 1 fi DEVICE="$1" LOCAL_ADDRESS="$2" REMOTE_ADDRESS="$3" NWMASK="$4" echo "Driver: $(ethtool -i ${DEVICE} | awk '/^driver:/{print $2}') " ethtool -k "${DEVICE}" | grep tx-udp echo echo "Set up NIC and tunnel..." ip addr add "${LOCAL_ADDRESS}/${NWMASK}" dev "${DEVICE}" ip link set "${DEVICE}" up sleep 2 ip link add vxlan1 type vxlan id 42 \ remote "${REMOTE_ADDRESS}" \ local "${LOCAL_ADDRESS}" \ dstport 0 \ dev "${DEVICE}" ip addr add fc00::1/64 dev vxlan1 ip link set vxlan1 up sleep 2 rm -f vxlan.pcap echo "Running tcpdump and iperf3..." ( nohup tcpdump -i any -w vxlan.pcap >/dev/null 2>&1 ) & sleep 2 iperf3 -c fc00::2 >/dev/null pkill tcpdump echo echo -n "Max. Paket Size: " tcpdump -r vxlan.pcap -nnle 2>/dev/null \ | grep "${LOCAL_ADDRESS}.*> ${REMOTE_ADDRESS}.*OTV" \ | awk '{print $8}' | awk -F ':' '{print $1}' \ | sort -n | tail -1 echo ip link del vxlan1 ip addr del ${LOCAL_ADDRESS}/${NWMASK} dev "${DEVICE}" === SNAP === The expected outcome is Max. Paket Size: 64904 This is what you see on igb, the code igc has been taken from. However, on igc the output is Max. Paket Size: 1516 so the GSO aggregate packets are segmented by the kernel before calling igc_xmit_frame. Inside the subsequent call to igc_tso, the check for skb_is_gso(skb) fails and the function returns prematurely. It turns out that this occurs because the feature flags aren't set entirely correctly in igc_probe. In contrast to the original code from igb_probe, igc_probe neglects to set the flags required to allow tunnel offloading. Setting the same flags as igb fixes the issue on igc. Fixes: 34428dff3679 ("igc: Add GSO partial support") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Tested-by: Corinna Vinschen <vinschen@redhat.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 September 2021, 13:29:58 UTC
7c3a0a0 Eli Cohen 15 September 2021, 04:47:27 UTC net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert Remove the assert from the callback priv lookup function since it does not require RTNL lock and is already protected by flow_indr_block_lock. This will avoid warnings from being emitted to dmesg if the driver registers its callback after an ingress qdisc was created for a netdevice. The warnings started after the following patch was merged: commit 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation") Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 September 2021, 13:09:30 UTC
84fb7df Adam Borowski 12 September 2021, 21:23:21 UTC net: wan: wanxl: define CROSS_COMPILE_M68K It was used but never set. The hardcoded value from before the dawn of time was non-standard; the usual name for cross-tools is $TRIPLET-$TOOL Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: David S. Miller <davem@davemloft.net> 16 September 2021, 13:08:04 UTC
98dc68f Xiang wangx 16 September 2021, 12:24:42 UTC selftests: nci: replace unsigned int with int Should not use comparison of unsigned expressions < 0. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 September 2021, 12:55:51 UTC
f2faea8 Lucas Stach 20 August 2021, 20:18:30 UTC drm/etnaviv: add missing MMU context put when reaping MMU mapping When we forcefully evict a mapping from the the address space and thus the MMU context, the MMU context is leaked, as the mapping no longer points to it, so it doesn't get freed when the GEM object is destroyed. Add the mssing context put to fix the leak. Cc: stable@vger.kernel.org # 5.4 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> 16 September 2021, 08:35:37 UTC
d640853 Lucas Stach 20 August 2021, 20:18:29 UTC drm/etnaviv: reference MMU context when setting up hardware state Move the refcount manipulation of the MMU context to the point where the hardware state is programmed. At that point it is also known if a previous MMU state is still there, or the state needs to be reprogrammed with a potentially different context. Cc: stable@vger.kernel.org # 5.4 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> 16 September 2021, 08:35:33 UTC
f978a53 Lucas Stach 20 August 2021, 20:18:28 UTC drm/etnaviv: fix MMU context leak on GPU reset After a reset the GPU is no longer using the MMU context and may be restarted with a different context. While the mmu_state proeprly was cleared, the context wasn't unreferenced, leading to a memory leak. Cc: stable@vger.kernel.org # 5.4 Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> 16 September 2021, 08:35:29 UTC
725cbc7 Lucas Stach 20 August 2021, 20:18:27 UTC drm/etnaviv: exec and MMU state is lost when resetting the GPU When the GPU is reset both the current exec state, as well as all MMU state is lost. Move the driver side state tracking into the reset function to keep hardware and software state from diverging. Cc: stable@vger.kernel.org # 5.4 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> 16 September 2021, 08:35:24 UTC
8f3eea9 Lucas Stach 20 August 2021, 20:18:26 UTC drm/etnaviv: keep MMU context across runtime suspend/resume The MMU state may be kept across a runtime suspend/resume cycle, as we avoid a full hardware reset to keep the latency of the runtime PM small. Don't pretend that the MMU state is lost in driver state. The MMU context is pushed out when new HW jobs with a different context are coming in. The only exception to this is when the GPU is unbound, in which case we need to make sure to also free the last active context. Cc: stable@vger.kernel.org # 5.4 Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> 16 September 2021, 08:35:20 UTC
23e0f5a Lucas Stach 20 August 2021, 20:18:25 UTC drm/etnaviv: stop abusing mmu_context as FE running marker While the DMA frontend can only be active when the MMU context is set, the reverse isn't necessarily true, as the frontend can be stopped while the MMU state is kept. Stop treating mmu_context being set as a indication that the frontend is running and instead add a explicit property. Cc: stable@vger.kernel.org # 5.4 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> 16 September 2021, 08:35:15 UTC
cda7532 Lucas Stach 20 August 2021, 20:18:24 UTC drm/etnaviv: put submit prev MMU context when it exists The prev context is the MMU context at the time of the job queueing in hardware. As a job might be queued multiple times due to recovery after a GPU hang, we need to make sure to put the stale prev MMU context from a prior queuing, to avoid the reference and thus the MMU context leaking. Cc: stable@vger.kernel.org # 5.4 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> 16 September 2021, 08:35:11 UTC
78edefc Lucas Stach 20 August 2021, 20:18:23 UTC drm/etnaviv: return context from etnaviv_iommu_context_get Being able to have the refcount manipulation in an assignment makes it much easier to parse the code. Cc: stable@vger.kernel.org # 5.4 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Michael Walle <michael@walle.cc> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> 16 September 2021, 08:34:59 UTC
90cc7be Helge Deller 16 September 2021, 06:35:42 UTC parisc: Use absolute_pointer() to define PAGE0 Use absolute_pointer() wrapper for PAGE0 to avoid this compiler warning: arch/parisc/kernel/setup.c: In function 'start_parisc': error: '__builtin_memcmp_eq' specified bound 8 exceeds source size 0 Signed-off-by: Helge Deller <deller@gmx.de> Co-Developed-by: Guenter Roeck <linux@roeck-us.net> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> 16 September 2021, 06:35:42 UTC
ff1ffd7 Linus Torvalds 16 September 2021, 00:18:56 UTC Merge tag 'hyperv-fixes-signed-20210915' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Fix kernel crash caused by uio driver (Vitaly Kuznetsov) - Remove on-stack cpumask from HV APIC code (Wei Liu) * tag 'hyperv-fixes-signed-20210915' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: remove on-stack cpumask from hv_send_ipi_mask_allbutself asm-generic/hyperv: provide cpumask_to_vpset_noself Drivers: hv: vmbus: Fix kernel crash upon unbinding a device from uio_hv_generic driver 16 September 2021, 00:18:56 UTC
453fa43 Linus Torvalds 16 September 2021, 00:06:01 UTC Merge tag 'rtc-5.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fix from Alexandre Belloni: "Fix a locking issue in the cmos rtc driver" * tag 'rtc-5.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: cmos: Disable irq around direct invocation of cmos_interrupt() 16 September 2021, 00:06:01 UTC
a57d8c2 Vladimir Oltean 14 September 2021, 13:47:26 UTC net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports Sometimes when unbinding the mv88e6xxx driver on Turris MOX, these error messages appear: mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 1 from fdb: -2 mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete be:79:b4:9e:9e:96 vid 0 from fdb: -2 mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 100 from fdb: -2 mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 1 from fdb: -2 mv88e6085 d0032004.mdio-mii:12: port 1 failed to delete d8:58:d7:00:ca:6d vid 0 from fdb: -2 (and similarly for other ports) What happens is that DSA has a policy "even if there are bugs, let's at least not leak memory" and dsa_port_teardown() clears the dp->fdbs and dp->mdbs lists, which are supposed to be empty. But deleting that cleanup code, the warnings go away. => the FDB and MDB lists (used for refcounting on shared ports, aka CPU and DSA ports) will eventually be empty, but are not empty by the time we tear down those ports. Aka we are deleting them too soon. The addresses that DSA complains about are host-trapped addresses: the local addresses of the ports, and the MAC address of the bridge device. The problem is that offloading those entries happens from a deferred work item scheduled by the SWITCHDEV_FDB_DEL_TO_DEVICE handler, and this races with the teardown of the CPU and DSA ports where the refcounting is kept. In fact, not only it races, but fundamentally speaking, if we iterate through the port list linearly, we might end up tearing down the shared ports even before we delete a DSA user port which has a bridge upper. So as it turns out, we need to first tear down the user ports (and the unused ones, for no better place of doing that), then the shared ports (the CPU and DSA ports). In between, we need to ensure that all work items scheduled by our switchdev handlers (which only run for user ports, hence the reason why we tear them down first) have finished. Fixes: 161ca59d39e9 ("net: dsa: reference count the MDB entries at the cross-chip notifier level") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210914134726.2305133-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 15 September 2021, 22:09:46 UTC
301de69 Vladimir Oltean 14 September 2021, 14:05:15 UTC Revert "net: phy: Uniform PHY driver access" This reverts commit 3ac8eed62596387214869319379c1fcba264d8c6, which did more than it said on the box, and not only it replaced to_phy_driver with phydev->drv, but it also removed the "!drv" check, without actually explaining why that is fine. That patch in fact breaks suspend/resume on any system which has PHY devices with no drivers bound. The stack trace is: Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8 pc : mdio_bus_phy_suspend+0xd8/0xec lr : dpm_run_callback+0x38/0x90 Call trace: mdio_bus_phy_suspend+0xd8/0xec dpm_run_callback+0x38/0x90 __device_suspend+0x108/0x3cc dpm_suspend+0x140/0x210 dpm_suspend_start+0x7c/0xa0 suspend_devices_and_enter+0x13c/0x540 pm_suspend+0x2a4/0x330 Examples why that assumption is not fine: - There is an MDIO bus with a PHY device that doesn't have a specific PHY driver loaded, because mdiobus_register() automatically creates a PHY device for it but there is no specific PHY driver in the system. Normally under those circumstances, the generic PHY driver will be bound lazily to it (at phy_attach_direct time). But some Ethernet drivers attach to their PHY at .ndo_open time. Until then it, the to-be-driven-by-genphy PHY device will not have a driver. The blamed patch amounts to saying "you need to open all net devices before the system can suspend, to avoid the NULL pointer dereference". - There is any raw MDIO device which has 'plausible' values in the PHY ID registers 2 and 3, which is located on an MDIO bus whose driver does not set bus->phy_mask = ~0 (which prevents auto-scanning of PHY devices). An example could be a MAC's internal MDIO bus with PCS devices on it, for serial links such as SGMII. PHY devices will get created for those PCSes too, due to that MDIO bus auto-scanning, and although those PHY devices are not used, they do not bother anybody either. PCS devices are usually managed in Linux as raw MDIO devices. Nonetheless, they do not have a PHY driver, nor does anybody attempt to connect to them (because they are not a PHY), and therefore this patch breaks that. The goal itself of the patch is questionable, so I am going for a straight revert. to_phy_driver does not seem to have a need to be replaced by phydev->drv, in fact that might even trigger code paths which were not given too deep of a thought. For instance: phy_probe populates phydev->drv at the beginning, but does not clean it up on any error (including EPROBE_DEFER). So if the phydev driver requests probe deferral, phydev->drv will remain populated despite there being no driver bound. If a system suspend starts in between the initial probe deferral request and the subsequent probe retry, we will be calling the phydev->drv->suspend method, but _before_ any phydev->drv->probe call has succeeded. That is to say, if the phydev->drv is allocating any driver-private data structure in ->probe, it pretty much expects that data structure to be available in ->suspend. But it may not. That is a pretty insane environment to present to PHY drivers. In the code structure before the blamed patch, mdio_bus_phy_may_suspend would just say "no, don't suspend" to any PHY device which does not have a driver pointer _in_the_device_structure_ (not the phydev->drv). That would essentially ensure that ->suspend will never get called for a device that has not yet successfully completed probe. This is the code structure the patch is returning to, via the revert. Fixes: 3ac8eed62596 ("net: phy: Uniform PHY driver access") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210914140515.2311548-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 15 September 2021, 22:06:46 UTC
back to top