Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
f4d51df Linus Torvalds 07 September 2020, 00:11:40 UTC Linux 5.9-rc4 07 September 2020, 00:11:40 UTC
a8205e3 Linus Torvalds 06 September 2020, 19:10:27 UTC Merge tag 'io_uring-5.9-2020-09-06' of git://git.kernel.dk/linux-block Pull more io_uring fixes from Jens Axboe: "Two followup fixes. One is fixing a regression from this merge window, the other is two commits fixing cancelation of deferred requests. Both have gone through full testing, and both spawned a few new regression test additions to liburing. - Don't play games with const, properly store the output iovec and assign it as needed. - Deferred request cancelation fix (Pavel)" * tag 'io_uring-5.9-2020-09-06' of git://git.kernel.dk/linux-block: io_uring: fix linked deferred ->files cancellation io_uring: fix cancel of deferred reqs with ->files io_uring: fix explicit async read/write mapping for large segments 06 September 2020, 19:10:27 UTC
2ccdd9f Linus Torvalds 06 September 2020, 18:58:15 UTC Merge tag 'iommu-fixes-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - three Intel VT-d fixes to fix address handling on 32bit, fix a NULL pointer dereference bug and serialize a hardware register access as required by the VT-d spec. - two patches for AMD IOMMU to force AMD GPUs into translation mode when memory encryption is active and disallow using IOMMUv2 functionality. This makes the AMDGPU driver work when memory encryption is active. - two more fixes for AMD IOMMU to fix updating the Interrupt Remapping Table Entries. - MAINTAINERS file update for the Qualcom IOMMU driver. * tag 'iommu-fixes-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Handle 36bit addressing for x86-32 iommu/amd: Do not use IOMMUv2 functionality when SME is active iommu/amd: Do not force direct mapping when SME is active iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE iommu/amd: Restore IRTE.RemapEn bit after programming IRTE iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set() iommu/vt-d: Serialize IOMMU GCMD register modifications MAINTAINERS: Update QUALCOMM IOMMU after Arm SMMU drivers move 06 September 2020, 18:58:15 UTC
015b315 Linus Torvalds 06 September 2020, 17:28:00 UTC Merge tag 'x86-urgent-2020-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: - more generic entry code ABI fallout - debug register handling bugfixes - fix vmalloc mappings on 32-bit kernels - kprobes instrumentation output fix on 32-bit kernels - fix over-eager WARN_ON_ONCE() on !SMAP hardware - NUMA debugging fix - fix Clang related crash on !RETPOLINE kernels * tag 'x86-urgent-2020-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry: Unbreak 32bit fast syscall x86/debug: Allow a single level of #DB recursion x86/entry: Fix AC assertion tracing/kprobes, x86/ptrace: Fix regs argument order for i386 x86, fakenuma: Fix invalid starting node ID x86/mm/32: Bring back vmalloc faulting on x86_32 x86/cmdline: Disable jump tables for cmdline.c 06 September 2020, 17:28:00 UTC
68beef5 Linus Torvalds 06 September 2020, 16:59:27 UTC Merge tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "A small series for fixing a problem with Xen PVH guests when running as backends (e.g. as dom0). Mapping other guests' memory is now working via ZONE_DEVICE, thus not requiring to abuse the memory hotplug functionality for that purpose" * tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: add helpers to allocate unpopulated memory memremap: rename MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC xen/balloon: add header guard 06 September 2020, 16:59:27 UTC
c127a2a Pavel Begunkov 05 September 2020, 21:45:15 UTC io_uring: fix linked deferred ->files cancellation While looking for ->files in ->defer_list, consider that requests there may actually be links. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 05 September 2020, 22:02:42 UTC
b7ddce3 Pavel Begunkov 05 September 2020, 21:45:14 UTC io_uring: fix cancel of deferred reqs with ->files While trying to cancel requests with ->files, it also should look for requests in ->defer_list, otherwise it might end up hanging a thread. Cancel all requests in ->defer_list up to the last request there with matching ->files, that's needed to follow drain ordering semantics. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 05 September 2020, 21:59:51 UTC
dd9fb9b Linus Torvalds 05 September 2020, 21:22:46 UTC Merge tags 'auxdisplay-for-linus-v5.9-rc4', 'clang-format-for-linus-v5.9-rc4' and 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux Pull misc fixes from Miguel Ojeda: "A trivial patch for auxdisplay: - Replace HTTP links with HTTPS ones (Alexander A. Klimov) The usual clang-format trivial update: - Update with the latest for_each macro list (Miguel Ojeda) And Luc requested me to pick a sparse fix on my queue, so here it goes along with other two trivial Compiler Attributes ones (also from Luc). - sparse: use static inline for __chk_{user,io}_ptr() (Luc Van Oostenryck) - Compiler Attributes: fix comment concerning GCC 4.6 (Luc Van Oostenryck) - Compiler Attributes: remove comment about sparse not supporting __has_attribute (Luc Van Oostenryck)" * tag 'auxdisplay-for-linus-v5.9-rc4' of git://github.com/ojeda/linux: auxdisplay: Replace HTTP links with HTTPS ones * tag 'clang-format-for-linus-v5.9-rc4' of git://github.com/ojeda/linux: clang-format: Update with the latest for_each macro list * tag 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux: sparse: use static inline for __chk_{user,io}_ptr() Compiler Attributes: fix comment concerning GCC 4.6 Compiler Attributes: remove comment about sparse not supporting __has_attribute 05 September 2020, 21:22:46 UTC
70187f7 Linus Torvalds 05 September 2020, 20:46:14 UTC Merge tag 'arc-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - HSDK-4xd Dev system: perf driver updates for sampling interrupt - HSDK* Dev System: Ethernet broken [Evgeniy Didin] - HIGHMEM broken (2 memory banks) [Mike Rapoport] - show_regs() rewrite once and for all - Other minor fixes * tag 'arc-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id arc: fix memory initialization for systems with two memory banks irqchip/eznps: Fix build error for !ARC700 builds ARC: show_regs: fix r12 printing and simplify ARC: HSDK: wireup perf irq ARC: perf: don't bail setup if pct irq missing in device-tree ARC: pgalloc.h: delete a duplicated word + other fixes 05 September 2020, 20:46:14 UTC
7514c03 Linus Torvalds 05 September 2020, 20:28:40 UTC Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "19 patches. Subsystems affected by this patch series: MAINTAINERS, ipc, fork, checkpatch, lib, and mm (memcg, slub, pagemap, madvise, migration, hugetlb)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: include/linux/log2.h: add missing () around n in roundup_pow_of_two() mm/khugepaged.c: fix khugepaged's request size in collapse_file mm/hugetlb: fix a race between hugetlb sysctl handlers mm/hugetlb: try preferred node first when alloc gigantic page from cma mm/migrate: preserve soft dirty in remove_migration_pte() mm/migrate: remove unnecessary is_zone_device_page() check mm/rmap: fixup copying of soft dirty and uffd ptes mm/migrate: fixup setting UFFD_WP flag mm: madvise: fix vma user-after-free checkpatch: fix the usage of capture group ( ... ) fork: adjust sysctl_max_threads definition to match prototype ipc: adjust proc_ipc_sem_dointvec definition to match prototype mm: track page table modifications in __apply_to_page_range() MAINTAINERS: IA64: mark Status as Odd Fixes only MAINTAINERS: add LLVM maintainers MAINTAINERS: update Cavium/Marvell entries mm: slub: fix conversion of freelist_corrupted() mm: memcg: fix memcg reclaim soft lockup memcg: fix use-after-free in uncharge_batch 05 September 2020, 20:28:40 UTC
428fc0a Jason Gunthorpe 04 September 2020, 23:36:19 UTC include/linux/log2.h: add missing () around n in roundup_pow_of_two() Otherwise gcc generates warnings if the expression is complicated. Fixes: 312a0c170945 ("[PATCH] LOG2: Alter roundup_pow_of_two() so that it can use a ilog2() on a constant") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/0-v1-8a2697e3c003+41165-log_brackets_jgg@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:30 UTC
e5a59d3 David Howells 04 September 2020, 23:36:16 UTC mm/khugepaged.c: fix khugepaged's request size in collapse_file collapse_file() in khugepaged passes PAGE_SIZE as the number of pages to be read to page_cache_sync_readahead(). The intent was probably to read a single page. Fix it to use the number of pages to the end of the window instead. Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yang Shi <shy828301@gmail.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Eric Biggers <ebiggers@google.com> Link: https://lkml.kernel.org/r/20200903140844.14194-2-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:30 UTC
1774379 Muchun Song 04 September 2020, 23:36:13 UTC mm/hugetlb: fix a race between hugetlb sysctl handlers There is a race between the assignment of `table->data` and write value to the pointer of `table->data` in the __do_proc_doulongvec_minmax() on the other thread. CPU0: CPU1: proc_sys_write hugetlb_sysctl_handler proc_sys_call_handler hugetlb_sysctl_handler_common hugetlb_sysctl_handler table->data = &tmp; hugetlb_sysctl_handler_common table->data = &tmp; proc_doulongvec_minmax do_proc_doulongvec_minmax sysctl_head_finish __do_proc_doulongvec_minmax unuse_table i = table->data; *i = val; // corrupt CPU1's stack Fix this by duplicating the `table`, and only update the duplicate of it. And introduce a helper of proc_hugetlb_doulongvec_minmax() to simplify the code. The following oops was seen: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page Code: Bad RIP value. ... Call Trace: ? set_max_huge_pages+0x3da/0x4f0 ? alloc_pool_huge_page+0x150/0x150 ? proc_doulongvec_minmax+0x46/0x60 ? hugetlb_sysctl_handler_common+0x1c7/0x200 ? nr_hugepages_store+0x20/0x20 ? copy_fd_bitmaps+0x170/0x170 ? hugetlb_sysctl_handler+0x1e/0x20 ? proc_sys_call_handler+0x2f1/0x300 ? unregister_sysctl_table+0xb0/0xb0 ? __fd_install+0x78/0x100 ? proc_sys_write+0x14/0x20 ? __vfs_write+0x4d/0x90 ? vfs_write+0xef/0x240 ? ksys_write+0xc0/0x160 ? __ia32_sys_read+0x50/0x50 ? __close_fd+0x129/0x150 ? __x64_sys_write+0x43/0x50 ? do_syscall_64+0x6c/0x200 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: e5ff215941d5 ("hugetlb: multiple hstates for multiple page sizes") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20200828031146.43035-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:30 UTC
953f064 Li Xinhai 04 September 2020, 23:36:10 UTC mm/hugetlb: try preferred node first when alloc gigantic page from cma Since commit cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma"), the gigantic page would be allocated from node which is not the preferred node, although there are pages available from that node. The reason is that the nid parameter has been ignored in alloc_gigantic_page(). Besides, the __GFP_THISNODE also need be checked if user required to alloc only from the preferred node. After this patch, the preferred node is tried first before other allowed nodes, and don't try to allocate from other nodes if __GFP_THISNODE is specified. If user don't specify the preferred node, the current node will be used as preferred node, which makes sure consistent behavior of allocating gigantic and non-gigantic hugetlb page. Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Link: https://lkml.kernel.org/r/20200902025016.697260-1-lixinhai.lxh@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:30 UTC
3d321bf Ralph Campbell 04 September 2020, 23:36:07 UTC mm/migrate: preserve soft dirty in remove_migration_pte() The code to remove a migration PTE and replace it with a device private PTE was not copying the soft dirty bit from the migration entry. This could lead to page contents not being marked dirty when faulting the page back from device private memory. Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Link: https://lkml.kernel.org/r/20200831212222.22409-3-rcampbell@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:30 UTC
6128763 Ralph Campbell 04 September 2020, 23:36:04 UTC mm/migrate: remove unnecessary is_zone_device_page() check Patch series "mm/migrate: preserve soft dirty in remove_migration_pte()". I happened to notice this from code inspection after seeing Alistair Popple's patch ("mm/rmap: Fixup copying of soft dirty and uffd ptes"). This patch (of 2): The check for is_zone_device_page() and is_device_private_page() is unnecessary since the latter is sufficient to determine if the page is a device private page. Simplify the code for easier reading. Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Link: https://lkml.kernel.org/r/20200831212222.22409-1-rcampbell@nvidia.com Link: https://lkml.kernel.org/r/20200831212222.22409-2-rcampbell@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:30 UTC
ad7df76 Alistair Popple 04 September 2020, 23:36:01 UTC mm/rmap: fixup copying of soft dirty and uffd ptes During memory migration a pte is temporarily replaced with a migration swap pte. Some pte bits from the existing mapping such as the soft-dirty and uffd write-protect bits are preserved by copying these to the temporary migration swap pte. However these bits are not stored at the same location for swap and non-swap ptes. Therefore testing these bits requires using the appropriate helper function for the given pte type. Unfortunately several code locations were found where the wrong helper function is being used to test soft_dirty and uffd_wp bits which leads to them getting incorrectly set or cleared during page-migration. Fix these by using the correct tests based on pte type. Fixes: a5430dda8a3a ("mm/migrate: support un-addressable ZONE_DEVICE page in migration") Fixes: 8c3328f1f36a ("mm/migrate: migrate_vma() unmap page from vma while collecting pages") Fixes: f45ec5ff16a7 ("userfaultfd: wp: support swap and page migration") Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Alistair Popple <alistair@popple.id.au> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200825064232.10023-2-alistair@popple.id.au Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:30 UTC
ebdf832 Alistair Popple 04 September 2020, 23:35:58 UTC mm/migrate: fixup setting UFFD_WP flag Commit f45ec5ff16a75 ("userfaultfd: wp: support swap and page migration") introduced support for tracking the uffd wp bit during page migration. However the non-swap PTE variant was used to set the flag for zone device private pages which are a type of swap page. This leads to corruption of the swap offset if the original PTE has the uffd_wp flag set. Fixes: f45ec5ff16a75 ("userfaultfd: wp: support swap and page migration") Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Link: https://lkml.kernel.org/r/20200825064232.10023-1-alistair@popple.id.au Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:30 UTC
7867fd7 Yang Shi 04 September 2020, 23:35:55 UTC mm: madvise: fix vma user-after-free The syzbot reported the below use-after-free: BUG: KASAN: use-after-free in madvise_willneed mm/madvise.c:293 [inline] BUG: KASAN: use-after-free in madvise_vma mm/madvise.c:942 [inline] BUG: KASAN: use-after-free in do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145 Read of size 8 at addr ffff8880a6163eb0 by task syz-executor.0/9996 CPU: 0 PID: 9996 Comm: syz-executor.0 Not tainted 5.9.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x18f/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 madvise_willneed mm/madvise.c:293 [inline] madvise_vma mm/madvise.c:942 [inline] do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145 do_madvise mm/madvise.c:1169 [inline] __do_sys_madvise mm/madvise.c:1171 [inline] __se_sys_madvise mm/madvise.c:1169 [inline] __x64_sys_madvise+0xd9/0x110 mm/madvise.c:1169 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 9992: kmem_cache_alloc+0x138/0x3a0 mm/slab.c:3482 vm_area_alloc+0x1c/0x110 kernel/fork.c:347 mmap_region+0x8e5/0x1780 mm/mmap.c:1743 do_mmap+0xcf9/0x11d0 mm/mmap.c:1545 vm_mmap_pgoff+0x195/0x200 mm/util.c:506 ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 9992: kmem_cache_free.part.0+0x67/0x1f0 mm/slab.c:3693 remove_vma+0x132/0x170 mm/mmap.c:184 remove_vma_list mm/mmap.c:2613 [inline] __do_munmap+0x743/0x1170 mm/mmap.c:2869 do_munmap mm/mmap.c:2877 [inline] mmap_region+0x257/0x1780 mm/mmap.c:1716 do_mmap+0xcf9/0x11d0 mm/mmap.c:1545 vm_mmap_pgoff+0x195/0x200 mm/util.c:506 ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 It is because vma is accessed after releasing mmap_lock, but someone else acquired the mmap_lock and the vma is gone. Releasing mmap_lock after accessing vma should fix the problem. Fixes: 692fe62433d4c ("mm: Handle MADV_WILLNEED through vfs_fadvise()") Reported-by: syzbot+b90df26038d1d5d85c97@syzkaller.appspotmail.com Signed-off-by: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> [5.4+] Link: https://lkml.kernel.org/r/20200816141204.162624-1-shy828301@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:29 UTC
13e4541 Mrinal Pandey 04 September 2020, 23:35:52 UTC checkpatch: fix the usage of capture group ( ... ) The usage of "capture group (...)" in the immediate condition after `&&` results in `$1` being uninitialized. This issues a warning "Use of uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl line 2638". I noticed this bug while running checkpatch on the set of commits from v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in their commit message. This bug was introduced in the script by commit e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog"). It has been in the script since then. The author intended to store the match made by capture group in variable `$1`. This should have contained the name of the file as `[\w/]+` matched. However, this couldn't be accomplished due to usage of capture group and `$1` in the same regular expression. Fix this by placing the capture group in the condition before `&&`. Thus, `$1` can be initialized to the text that capture group matches thereby setting it to the desired and required value. Fixes: e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog") Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Joe Perches <joe@perches.com> Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:29 UTC
b0daa2c Tobias Klauser 04 September 2020, 23:35:49 UTC fork: adjust sysctl_max_threads definition to match prototype Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the definition of sysctl_max_threads to match its prototype in linux/sysctl.h which fixes the following sparse error/warning: kernel/fork.c:3050:47: warning: incorrect type in argument 3 (different address spaces) kernel/fork.c:3050:47: expected void * kernel/fork.c:3050:47: got void [noderef] __user *buffer kernel/fork.c:3036:5: error: symbol 'sysctl_max_threads' redeclared with different type (incompatible argument 3 (different address spaces)): kernel/fork.c:3036:5: int extern [addressable] [signed] [toplevel] sysctl_max_threads( ... ) kernel/fork.c: note: in included file (through include/linux/key.h, include/linux/cred.h, include/linux/sched/signal.h, include/linux/sched/cputime.h): include/linux/sysctl.h:242:5: note: previously declared as: include/linux/sysctl.h:242:5: int extern [addressable] [signed] [toplevel] sysctl_max_threads( ... ) Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200825093647.24263-1-tklauser@distanz.ch Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:29 UTC
fff1662 Tobias Klauser 04 September 2020, 23:35:46 UTC ipc: adjust proc_ipc_sem_dointvec definition to match prototype Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the signature of proc_ipc_sem_dointvec to match ctl_table.proc_handler which fixes the following sparse error/warning: ipc/ipc_sysctl.c:94:47: warning: incorrect type in argument 3 (different address spaces) ipc/ipc_sysctl.c:94:47: expected void *buffer ipc/ipc_sysctl.c:94:47: got void [noderef] __user *buffer ipc/ipc_sysctl.c:194:35: warning: incorrect type in initializer (incompatible argument 3 (different address spaces)) ipc/ipc_sysctl.c:194:35: expected int ( [usertype] *proc_handler )( ... ) ipc/ipc_sysctl.c:194:35: got int ( * )( ... ) Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Link: https://lkml.kernel.org/r/20200825105846.5193-1-tklauser@distanz.ch Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:29 UTC
e80d390 Joerg Roedel 04 September 2020, 23:35:43 UTC mm: track page table modifications in __apply_to_page_range() __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1d893 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:29 UTC
9d90dd1 Randy Dunlap 04 September 2020, 23:35:40 UTC MAINTAINERS: IA64: mark Status as Odd Fixes only IA64 isn't really being maintained, so mark it as Odd Fixes only. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/7e719139-450f-52c2-59a2-7964a34eda1f@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:29 UTC
b964428 Nick Desaulniers 04 September 2020, 23:35:37 UTC MAINTAINERS: add LLVM maintainers Nominate Nathan and myself to be point of contact for clang/LLVM related support, after a poll at the LLVM BoF at Linux Plumbers Conf 2020. While corporate sponsorship is beneficial, its important to not entrust the keys to the nukes with any one entity. Should Nathan and I find ourselves at the same employer, I would gladly step down. Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Acked-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lkml.kernel.org/r/20200825143540.2948637-1-ndesaulniers@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:29 UTC
f548a64 Robert Richter 04 September 2020, 23:35:33 UTC MAINTAINERS: update Cavium/Marvell entries I am leaving Marvell and already do not have access to my @marvell.com email address. So switching over to my korg mail address or removing my address there another maintainer is already listed. For the entries there no other maintainer is listed I will keep looking into patches for Cavium systems for a while until someone from Marvell takes it over. Since I might have limited access to hardware and also limited time I changed state to 'Odd Fixes' for those entries. Signed-off-by: Robert Richter <rric@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ganapatrao Kulkarni <gkulkarni@marvell.com> Cc: Sunil Goutham <sgoutham@marvell.com> CC: Borislav Petkov <bp@alien8.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Wolfram Sang <wsa@kernel.org>, Link: https://lkml.kernel.org/r/20200824122050.31164-1-rric@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:29 UTC
dc07a72 Eugeniu Rosca 04 September 2020, 23:35:30 UTC mm: slub: fix conversion of freelist_corrupted() Commit 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in deactivate_slab()") suffered an update when picked up from LKML [1]. Specifically, relocating 'freelist = NULL' into 'freelist_corrupted()' created a no-op statement. Fix it by sticking to the behavior intended in the original patch [1]. In addition, make freelist_corrupted() immune to passing NULL instead of &freelist. The issue has been spotted via static analysis and code review. [1] https://lore.kernel.org/linux-mm/20200331031450.12182-1-dongli.zhang@oracle.com/ Fixes: 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in deactivate_slab()") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200824130643.10291-1-erosca@de.adit-jv.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:29 UTC
e3336ca Xunlei Pang 04 September 2020, 23:35:27 UTC mm: memcg: fix memcg reclaim soft lockup We've met softlockup with "CONFIG_PREEMPT_NONE=y", when the target memcg doesn't have any reclaimable memory. It can be easily reproduced as below: watchdog: BUG: soft lockup - CPU#0 stuck for 111s![memcg_test:2204] CPU: 0 PID: 2204 Comm: memcg_test Not tainted 5.9.0-rc2+ #12 Call Trace: shrink_lruvec+0x49f/0x640 shrink_node+0x2a6/0x6f0 do_try_to_free_pages+0xe9/0x3e0 try_to_free_mem_cgroup_pages+0xef/0x1f0 try_charge+0x2c1/0x750 mem_cgroup_charge+0xd7/0x240 __add_to_page_cache_locked+0x2fd/0x370 add_to_page_cache_lru+0x4a/0xc0 pagecache_get_page+0x10b/0x2f0 filemap_fault+0x661/0xad0 ext4_filemap_fault+0x2c/0x40 __do_fault+0x4d/0xf9 handle_mm_fault+0x1080/0x1790 It only happens on our 1-vcpu instances, because there's no chance for oom reaper to run to reclaim the to-be-killed process. Add a cond_resched() at the upper shrink_node_memcgs() to solve this issue, this will mean that we will get a scheduling point for each memcg in the reclaimed hierarchy without any dependency on the reclaimable memory in that memcg thus making it more predictable. Suggested-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Chris Down <chris@chrisdown.name> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Link: http://lkml.kernel.org/r/1598495549-67324-1-git-send-email-xlpang@linux.alibaba.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:29 UTC
f179654 Michal Hocko 04 September 2020, 23:35:24 UTC memcg: fix use-after-free in uncharge_batch syzbot has reported an use-after-free in the uncharge_batch path BUG: KASAN: use-after-free in instrument_atomic_write include/linux/instrumented.h:71 [inline] BUG: KASAN: use-after-free in atomic64_sub_return include/asm-generic/atomic-instrumented.h:970 [inline] BUG: KASAN: use-after-free in atomic_long_sub_return include/asm-generic/atomic-long.h:113 [inline] BUG: KASAN: use-after-free in page_counter_cancel mm/page_counter.c:54 [inline] BUG: KASAN: use-after-free in page_counter_uncharge+0x3d/0xc0 mm/page_counter.c:155 Write of size 8 at addr ffff8880371c0148 by task syz-executor.0/9304 CPU: 0 PID: 9304 Comm: syz-executor.0 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1f0/0x31e lib/dump_stack.c:118 print_address_description+0x66/0x620 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report+0x132/0x1d0 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:183 [inline] check_memory_region+0x2b5/0x2f0 mm/kasan/generic.c:192 instrument_atomic_write include/linux/instrumented.h:71 [inline] atomic64_sub_return include/asm-generic/atomic-instrumented.h:970 [inline] atomic_long_sub_return include/asm-generic/atomic-long.h:113 [inline] page_counter_cancel mm/page_counter.c:54 [inline] page_counter_uncharge+0x3d/0xc0 mm/page_counter.c:155 uncharge_batch+0x6c/0x350 mm/memcontrol.c:6764 uncharge_page+0x115/0x430 mm/memcontrol.c:6796 uncharge_list mm/memcontrol.c:6835 [inline] mem_cgroup_uncharge_list+0x70/0xe0 mm/memcontrol.c:6877 release_pages+0x13a2/0x1550 mm/swap.c:911 tlb_batch_pages_flush mm/mmu_gather.c:49 [inline] tlb_flush_mmu_free mm/mmu_gather.c:242 [inline] tlb_flush_mmu+0x780/0x910 mm/mmu_gather.c:249 tlb_finish_mmu+0xcb/0x200 mm/mmu_gather.c:328 exit_mmap+0x296/0x550 mm/mmap.c:3185 __mmput+0x113/0x370 kernel/fork.c:1076 exit_mm+0x4cd/0x550 kernel/exit.c:483 do_exit+0x576/0x1f20 kernel/exit.c:793 do_group_exit+0x161/0x2d0 kernel/exit.c:903 get_signal+0x139b/0x1d30 kernel/signal.c:2743 arch_do_signal+0x33/0x610 arch/x86/kernel/signal.c:811 exit_to_user_mode_loop kernel/entry/common.c:135 [inline] exit_to_user_mode_prepare+0x8d/0x1b0 kernel/entry/common.c:166 syscall_exit_to_user_mode+0x5e/0x1a0 kernel/entry/common.c:241 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Commit 1a3e1f40962c ("mm: memcontrol: decouple reference counting from page accounting") reworked the memcg lifetime to be bound the the struct page rather than charges. It also removed the css_put_many from uncharge_batch and that is causing the above splat. uncharge_batch() is supposed to uncharge accumulated charges for all pages freed from the same memcg. The queuing is done by uncharge_page which however drops the memcg reference after it adds charges to the batch. If the current page happens to be the last one holding the reference for its memcg then the memcg is OK to go and the next page to be freed will trigger batched uncharge which needs to access the memcg which is gone already. Fix the issue by taking a reference for the memcg in the current batch. Fixes: 1a3e1f40962c ("mm: memcontrol: decouple reference counting from page accounting") Reported-by: syzbot+b305848212deec86eabe@syzkaller.appspotmail.com Reported-by: syzbot+b5ea6fb6f139c8b9482b@syzkaller.appspotmail.com Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Roman Gushchin <guro@fb.com> Cc: Hugh Dickins <hughd@google.com> Link: https://lkml.kernel.org/r/20200820090341.GC5033@dhcp22.suse.cz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 19:14:29 UTC
9322c47 Linus Torvalds 05 September 2020, 17:04:53 UTC Merge tag 'xfs-5.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs fix from Darrick Wong: "Fix a broken metadata verifier that would incorrectly validate attr fork extents of a realtime file against the realtime volume" * tag 'xfs-5.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix xfs_bmap_validate_extent_raw when checking attr fork of rt files 05 September 2020, 17:04:53 UTC
b17164e Mikulas Patocka 05 September 2020, 12:13:02 UTC xfs: don't update mtime on COW faults When running in a dax mode, if the user maps a page with MAP_PRIVATE and PROT_WRITE, the xfs filesystem would incorrectly update ctime and mtime when the user hits a COW fault. This breaks building of the Linux kernel. How to reproduce: 1. extract the Linux kernel tree on dax-mounted xfs filesystem 2. run make clean 3. run make -j12 4. run make -j12 at step 4, make would incorrectly rebuild the whole kernel (although it was already built in step 3). The reason for the breakage is that almost all object files depend on objtool. When we run objtool, it takes COW page fault on its .data section, and these faults will incorrectly update the timestamp of the objtool binary. The updated timestamp causes make to rebuild the whole tree. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 17:00:05 UTC
1ef6ea0 Mikulas Patocka 05 September 2020, 12:12:01 UTC ext2: don't update mtime on COW faults When running in a dax mode, if the user maps a page with MAP_PRIVATE and PROT_WRITE, the ext2 filesystem would incorrectly update ctime and mtime when the user hits a COW fault. This breaks building of the Linux kernel. How to reproduce: 1. extract the Linux kernel tree on dax-mounted ext2 filesystem 2. run make clean 3. run make -j12 4. run make -j12 at step 4, make would incorrectly rebuild the whole kernel (although it was already built in step 3). The reason for the breakage is that almost all object files depend on objtool. When we run objtool, it takes COW page fault on its .data section, and these faults will incorrectly update the timestamp of the objtool binary. The updated timestamp causes make to rebuild the whole tree. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 05 September 2020, 17:00:05 UTC
c183edf Jens Axboe 05 September 2020, 04:36:52 UTC io_uring: fix explicit async read/write mapping for large segments If we exceed UIO_FASTIOV, we don't handle the transition correctly between an allocated vec for requests that are queued with IOSQE_ASYNC. Store the iovec appropriately and re-set it in the iter iov in case it changed. Fixes: ff6165b2d7f6 ("io_uring: retain iov_iter state over io_read/io_write calls") Reported-by: Nick Hill <nick@nickhill.org> Tested-by: Norman Maurer <norman.maurer@googlemail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 05 September 2020, 15:02:47 UTC
c70672d Linus Torvalds 04 September 2020, 20:46:33 UTC Merge tag 's390-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix GENERIC_LOCKBREAK dependency on PREEMPTION in Kconfig broken because of a typo - Update defconfigs * tag 's390-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: update defconfigs s390: fix GENERIC_LOCKBREAK dependency typo in Kconfig 04 September 2020, 20:46:33 UTC
09274ae Linus Torvalds 04 September 2020, 20:40:59 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix the loading of modules built with binutils-2.35. This version produces writable and executable .text.ftrace_trampoline section which is rejected by the kernel. - Remove the exporting of cpu_logical_map() as the Tegra driver has now been fixed and no longer uses this function. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/module: set trampoline section flags regardless of CONFIG_DYNAMIC_FTRACE arm64: Remove exporting cpu_logical_map symbol 04 September 2020, 20:40:59 UTC
16bf121 Linus Torvalds 04 September 2020, 20:37:19 UTC Merge tag 'mips_fixes_5.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: "A few MIPS fixes: - fallthrough fallout fix - BMIPS fixes - MSA fix to avoid leaking MSA register contents - Loongson perf and cpu feature fix - SNI interrupt fix" * tag 'mips_fixes_5.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: SNI: Fix SCSI interrupt MIPS: add missing MSACSR and upper MSA initialization MIPS: perf: Fix wrong check condition of Loongson event IDs mips/oprofile: Fix fallthrough placement MIPS: Loongson64: Remove unnecessary inclusion of boot_param.h MIPS: BMIPS: Also call bmips_cpu_setup() for secondary cores MIPS: mm: BMIPS5000 has inclusive physical caches MIPS: Loongson64: Do not override watch and ejtag feature 04 September 2020, 20:37:19 UTC
41bef91 Linus Torvalds 04 September 2020, 20:34:52 UTC Merge tag 'kbuild-fixes-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix documents - fix warning in 'make localmodconfig' * tag 'kbuild-fixes-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove redundant assignment prompt = prompt kbuild: Documentation: clean up makefiles.rst kconfig: streamline_config.pl: check defined(ENV variable) before using it Documentation/llvm: Improve formatting of commands, variables, and arguments 04 September 2020, 20:34:52 UTC
f162626 Linus Torvalds 04 September 2020, 20:27:24 UTC Merge tag 'pm-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix reference counting in the operating performance points (OPP) framework and address a few intel_pstate driver issues, mostly related to switching driver operation modes and similar with hardware-managed P-states (HWP) enabled. Specifics: - Fix reference counting of operating performance points (OPP) tables (Viresh Kumar). - Address intel_pstate driver interface issues, mostly related to switching operation modes and handling CPU offline and online and system-wide suspend/resume with hardware-managed P-states (HWP) enabled (Rafael Wysocki). - Fix the maximum frequency computation in the intel_pstate driver with turbo P-states disabled by the platform firmware and HWP enabled (Francisco Jerez)" * tag 'pm-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled cpufreq: intel_pstate: Free memory only when turning off cpufreq: intel_pstate: Add ->offline and ->online callbacks cpufreq: intel_pstate: Tweak the EPP sysfs interface cpufreq: intel_pstate: Update cached EPP in the active mode cpufreq: intel_pstate: Refuse to turn off with HWP enabled opp: Don't drop reference for an OPP table that was never parsed 04 September 2020, 20:27:24 UTC
d824e08 Linus Torvalds 04 September 2020, 20:19:19 UTC Merge tag 'libata-5.9-2020-09-04' of git://git.kernel.dk/linux-block Pull libata fixes from Jens Axboe: - improve Sandisks ATA_HORKAGE on NCQ (Tejun) - link printk cleanup (Xu) * tag 'libata-5.9-2020-09-04' of git://git.kernel.dk/linux-block: libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks ata: ahci: use ata_link_info() instead of ata_link_printk() 04 September 2020, 20:19:19 UTC
8075fc3 Linus Torvalds 04 September 2020, 20:04:51 UTC Merge tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "A bit larger than usual this week, mostly due to the NVMe fixes arriving late for -rc3 and hence didn't make last weeks pull request. - NVMe: - instance leak and io boundary fixes from Keith - fc locking fix from Christophe - various tcp/rdma reset during traffic fixes from Sagi - pci use-after-free fix from Tong - tcp target null deref fix from Ziye - Locking fix for partition removal (Christoph) - Ensure bdi->io_pages is always set (me) - Fixup for hd struct reference (Ming) - Fix for zero length bvecs (Ming) - Two small blk-iocost fixes (Tejun)" * tag 'block-5.9-2020-09-04' of git://git.kernel.dk/linux-block: block: allow for_each_bvec to support zero len bvec blk-stat: make q->stats->lock irqsafe blk-iocost: ioc_pd_free() shouldn't assume irq disabled block: fix locking in bdev_del_partition block: release disk reference in hd_struct_free_work block: ensure bdi->io_pages is always initialized nvme-pci: cancel nvme device request before disabling nvme: only use power of two io boundaries nvme: fix controller instance leak nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()' nvme: Fix NULL dereference for pci nvme controllers nvme-rdma: fix reset hang if controller died in the middle of a reset nvme-rdma: fix timeout handler nvme-rdma: serialize controller teardown sequences nvme-tcp: fix reset hang if controller died in the middle of a reset nvme-tcp: fix timeout handler nvme-tcp: serialize controller teardown sequences nvme: have nvme_wait_freeze_timeout return if it timed out nvme-fabrics: don't check state NVME_CTRL_NEW for request acceptance nvmet-tcp: Fix NULL dereference when a connect data comes in h2cdata pdu 04 September 2020, 20:04:51 UTC
d849ca4 Linus Torvalds 04 September 2020, 19:55:22 UTC Merge tag 'io_uring-5.9-2020-09-04' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: - EAGAIN with O_NONBLOCK retry fix - Two small fixes for registered files (Jiufei) * tag 'io_uring-5.9-2020-09-04' of git://git.kernel.dk/linux-block: io_uring: no read/write-retry on -EAGAIN error and O_NONBLOCK marked file io_uring: set table->files[i] to NULL when io_sqe_file_register failed io_uring: fix removing the wrong file in __io_sqe_files_update() 04 September 2020, 19:55:22 UTC
2fb5479 Linus Torvalds 04 September 2020, 19:49:03 UTC Merge tag 'thermal-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fixes from Daniel Lezcano: - Fix bogus thermal shutdowns for omap4430 where bogus values resulting from an incorrect ADC conversion are too high and fire an emergency shutdown (Tony Lindgren) - Don't suppress negative temp for qcom spmi as they are valid and userspace needs them (Veera Vegivada) - Fix use-after-free in thermal_zone_device_unregister reported by Kasan (Dmitry Osipenko) * tag 'thermal-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal: core: Fix use-after-free in thermal_zone_device_unregister() thermal: qcom-spmi-temp-alarm: Don't suppress negative temp thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430 04 September 2020, 19:49:03 UTC
e2dacf6 Linus Torvalds 04 September 2020, 19:12:39 UTC Merge tag 'dmaengine-fix-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A couple of core fixes and odd driver fixes for dmaengine subsystem: Core: - drop ACPI CSRT table reference after using it - fix of_dma_router_xlate() error handling Drivers fixes in idxd, at_hdmac, pl330, dw-edma and jz478" * tag 'dmaengine-fix-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: ti: k3-udma: Update rchan_oes_offset for am654 SYSFW ABI 3.0 drivers/dma/dma-jz4780: Fix race condition between probe and irq handler dmaengine: dw-edma: Fix scatter-gather address calculation dmaengine: ti: k3-udma: Fix the TR initialization for prep_slave_sg dmaengine: pl330: Fix burst length if burst size is smaller than bus width dmaengine: at_hdmac: add missing kfree() call in at_dma_xlate() dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate() dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate() dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling dmaengine: idxd: reset states after device disable or reset dmaengine: acpi: Put the CSRT table after using it 04 September 2020, 19:12:39 UTC
86edf52 Linus Torvalds 04 September 2020, 19:05:25 UTC Merge tag 'sound-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small changes, nothing intrusive: - remaining tasklet API conversions, now all sound stuff have been converted - a few HD-audio and USB-audio quirks and minor fixes - FireWire Tascam and Digi00xx fixes - drop a kernel WARNING from PCM OSS for syzkaller" * tag 'sound-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits) ALSA: hda/realtek - Improved routing for Thinkpad X1 7th/8th Gen ALSA: hda: use consistent HDAudio spelling in comments/docs ALSA: hda: add dev_dbg log when driver is not selected ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled ALSA: hda: hdmi - add Rocketlake support ALSA: ua101: convert tasklets to use new tasklet_setup() API ALSA: usb-audio: convert tasklets to use new tasklet_setup() API ASoC: txx9: convert tasklets to use new tasklet_setup() API ASoC: siu: convert tasklets to use new tasklet_setup() API ASoC: fsl_esai: convert tasklets to use new tasklet_setup() API ALSA: hdsp: convert tasklets to use new tasklet_setup() API ALSA: riptide: convert tasklets to use new tasklet_setup() API ALSA: pci/asihpi: convert tasklets to use new tasklet_setup() API ALSA: firewire: convert tasklets to use new tasklet_setup() API ALSA: core: convert tasklets to use new tasklet_setup() API ALSA: pcm: oss: Remove superfluous WARN_ON() for mulaw sanity check ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO ALSA: hda/hdmi: always check pin power status in i915 pin fixup ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion NT950XCJ-X716A ALSA: usb-audio: Add basic capture support for Pioneer DJ DJM-250MK2 ... 04 September 2020, 19:05:25 UTC
cf85f5d Linus Torvalds 04 September 2020, 18:59:44 UTC Merge tag 'drm-fixes-2020-09-04' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Not much going on this week, nouveau has a display hw bug workaround, amdgpu has some PM fixes and CIK regression fixes, one single radeon PLL fix, and a couple of i915 display fixes. amdgpu: - Fix for 32bit systems - SW CTF fix - Update for Sienna Cichlid - CIK bug fixes radeon: - PLL fix i915: - Clang build warning fix - HDCP fixes nouveau: - display fixes" * tag 'drm-fixes-2020-09-04' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/kms/nv50-gp1xx: add WAR for EVO push buffer HW bug drm/nouveau/kms/nv50-gp1xx: disable notifies again after core update drm/nouveau/kms/nv50-: add some whitespace before debug message drm/nouveau/kms/gv100-: Include correct push header in crcc37d.c drm/radeon: Prefer lower feedback dividers drm/amdgpu: Fix bug in reporting voltage for CIK drm/amdgpu: Specify get_argument function for ci_smu_funcs drm/amd/pm: enable MP0 DPM for sienna_cichlid drm/amd/pm: avoid false alarm due to confusing softwareshutdowntemp setting drm/amd/pm: fix is_dpm_running() run error on 32bit system drm/i915: Clear the repeater bit on HDCP disable drm/i915: Fix sha_text population code drm/i915/display: Ensure that ret is always initialized in icl_combo_phy_verify_state 04 September 2020, 18:59:44 UTC
acf69c9 Or Cohen 04 September 2020, 04:05:28 UTC net/packet: fix overflow in tpacket_rcv Using tp_reserve to calculate netoff can overflow as tp_reserve is unsigned int and netoff is unsigned short. This may lead to macoff receving a smaller value then sizeof(struct virtio_net_hdr), and if po->has_vnet_hdr is set, an out-of-bounds write will occur when calling virtio_net_hdr_from_skb. The bug is fixed by converting netoff to unsigned int and checking if it exceeds USHRT_MAX. This addresses CVE-2020-14386 Fixes: 8913336a7e8d ("packet: add PACKET_RESERVE sockopt") Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2020, 18:56:02 UTC
b25d1dc Linus Torvalds 04 September 2020, 16:31:54 UTC Merge branch 'simplify-do_wp_page' Merge emailed patches from Peter Xu: "This is a small series that I picked up from Linus's suggestion to simplify cow handling (and also make it more strict) by checking against page refcounts rather than mapcounts. This makes uffd-wp work again (verified by running upmapsort)" Note: this is horrendously bad timing, and making this kind of fundamental vm change after -rc3 is not at all how things should work. The saving grace is that it really is a a nice simplification: 8 files changed, 29 insertions(+), 120 deletions(-) The reason for the bad timing is that it turns out that commit 17839856fd58 ("gup: document and work around 'COW can break either way' issue" broke not just UFFD functionality (as Peter noticed), but Mikulas Patocka also reports that it caused issues for strace when running in a DAX environment with ext4 on a persistent memory setup. And we can't just revert that commit without re-introducing the original issue that is a potential security hole, so making COW stricter (and in the process much simpler) is a step to then undoing the forced COW that broke other uses. Link: https://lore.kernel.org/lkml/alpine.LRH.2.02.2009031328040.6929@file01.intranet.prod.int.rdu2.redhat.com/ * emailed patches from Peter Xu <peterx@redhat.com>: mm: Add PGREUSE counter mm/gup: Remove enfornced COW mechanism mm/ksm: Remove reuse_ksm_page() mm: do_wp_page() simplification 04 September 2020, 16:31:54 UTC
f7ce2c3 Rafael J. Wysocki 04 September 2020, 16:31:25 UTC Merge branch 'pm-cpufreq' * pm-cpufreq: cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled cpufreq: intel_pstate: Free memory only when turning off cpufreq: intel_pstate: Add ->offline and ->online callbacks cpufreq: intel_pstate: Tweak the EPP sysfs interface cpufreq: intel_pstate: Update cached EPP in the active mode cpufreq: intel_pstate: Refuse to turn off with HWP enabled 04 September 2020, 16:31:25 UTC
798a6b8 Peter Xu 21 August 2020, 23:49:58 UTC mm: Add PGREUSE counter This accounts for wp_page_reuse() case, where we reused a page for COW. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2020, 16:25:20 UTC
a308c71 Peter Xu 21 August 2020, 23:49:57 UTC mm/gup: Remove enfornced COW mechanism With the more strict (but greatly simplified) page reuse logic in do_wp_page(), we can safely go back to the world where cow is not enforced with writes. This essentially reverts commit 17839856fd58 ("gup: document and work around 'COW can break either way' issue"). There are some context differences due to some changes later on around it: 2170ecfa7688 ("drm/i915: convert get_user_pages() --> pin_user_pages()", 2020-06-03) 376a34efa4ee ("mm/gup: refactor and de-duplicate gup_fast() code", 2020-06-03) Some lines moved back and forth with those, but this revert patch should have striped out and covered all the enforced cow bits anyways. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2020, 16:25:20 UTC
1a0cf26 Peter Xu 21 August 2020, 23:49:56 UTC mm/ksm: Remove reuse_ksm_page() Remove the function as the last reference has gone away with the do_wp_page() changes. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2020, 16:25:20 UTC
09854ba Linus Torvalds 21 August 2020, 23:49:55 UTC mm: do_wp_page() simplification How about we just make sure we're the only possible valid user fo the page before we bother to reuse it? Simplify, simplify, simplify. And get rid of the nasty serialization on the page lock at the same time. [peterx: add subject prefix] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2020, 16:25:20 UTC
cfc905f Leon Romanovsky 04 September 2020, 15:58:08 UTC gcov: Disable gcov build with GCC 10 GCOV built with GCC 10 doesn't initialize n_function variable. This produces different kernel panics as was seen by Colin in Ubuntu and me in FC 32. As a workaround, let's disable GCOV build for broken GCC 10 version. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891288 Link: https://lore.kernel.org/lkml/20200827133932.3338519-1-leon@kernel.org Link: https://lore.kernel.org/lkml/CAHk-=whbijeSdSvx-Xcr0DPMj0BiwhJ+uiNnDSVZcr_h_kg7UA@mail.gmail.com/ Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2020, 16:19:49 UTC
7b81ce7 Barret Rhoden 04 September 2020, 13:53:32 UTC init: fix error check in clean_path() init_stat() returns 0 on success, same as vfs_lstat(). When it replaced vfs_lstat(), the '!' was dropped. Fixes: 716308a5331b ("init: add an init_stat helper") Signed-off-by: Barret Rhoden <brho@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2020, 16:16:58 UTC
4facb95 Thomas Gleixner 01 September 2020, 23:50:54 UTC x86/entry: Unbreak 32bit fast syscall Andy reported that the syscall treacing for 32bit fast syscall fails: # ./tools/testing/selftests/x86/ptrace_syscall_32 ... [RUN] SYSEMU [FAIL] Initial args are wrong (nr=224, args=10 11 12 13 14 4289172732) ... [RUN] SYSCALL [FAIL] Initial args are wrong (nr=29, args=0 0 0 0 0 4289172732) The eason is that the conversion to generic entry code moved the retrieval of the sixth argument (EBP) after the point where the syscall entry work runs, i.e. ptrace, seccomp, audit... Unbreak it by providing a split up version of syscall_enter_from_user_mode(). - syscall_enter_from_user_mode_prepare() establishes state and enables interrupts - syscall_enter_from_user_mode_work() runs the entry work Replace the call to syscall_enter_from_user_mode() in the 32bit fast syscall C-entry with the split functions and stick the EBP retrieval between them. Fixes: 27d6b4d14f5c ("x86/entry: Use generic syscall entry function") Reported-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/87k0xdjbtt.fsf@nanos.tec.linutronix.de 04 September 2020, 13:50:14 UTC
d5c678a Andy Lutomirski 02 September 2020, 13:25:51 UTC x86/debug: Allow a single level of #DB recursion Trying to clear DR7 around a #DB from usermode malfunctions if the tasks schedules when delivering SIGTRAP. Rather than trying to define a special no-recursion region, just allow a single level of recursion. The same mechanism is used for NMI, and it hasn't caused any problems yet. Fixes: 9f58fdde95c9 ("x86/db: Split out dr6/7 handling") Reported-by: Kyle Huey <me@kylehuey.com> Debugged-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/8b9bd05f187231df008d48cf818a6a311cbd5c98.1597882384.git.luto@kernel.org Link: https://lore.kernel.org/r/20200902133200.726584153@infradead.org 04 September 2020, 13:09:29 UTC
662a022 Peter Zijlstra 02 September 2020, 13:25:50 UTC x86/entry: Fix AC assertion The WARN added in commit 3c73b81a9164 ("x86/entry, selftests: Further improve user entry sanity checks") unconditionally triggers on a IVB machine because it does not support SMAP. For !SMAP hardware the CLAC/STAC instructions are patched out and thus if userspace sets AC, it is still have set after entry. Fixes: 3c73b81a9164 ("x86/entry, selftests: Further improve user entry sanity checks") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200902133200.666781610@infradead.org 04 September 2020, 13:09:29 UTC
2356bb4 Vamshi K Sthambamkadi 28 August 2020, 11:32:46 UTC tracing/kprobes, x86/ptrace: Fix regs argument order for i386 On i386, the order of parameters passed on regs is eax,edx,and ecx (as per regparm(3) calling conventions). Change the mapping in regs_get_kernel_argument(), so that arg1=ax arg2=dx, and arg3=cx. Running the selftests testcase kprobes_args_use.tc shows the result as passed. Fixes: 3c88ee194c28 ("x86: ptrace: Add function argument access API") Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200828113242.GA1424@cosmos 04 September 2020, 12:40:42 UTC
29aaebb Chris Wilson 22 August 2020, 16:02:09 UTC iommu/vt-d: Handle 36bit addressing for x86-32 Beware that the address size for x86-32 may exceed unsigned long. [ 0.368971] UBSAN: shift-out-of-bounds in drivers/iommu/intel/iommu.c:128:14 [ 0.369055] shift exponent 36 is too large for 32-bit type 'long unsigned int' If we don't handle the wide addresses, the pages are mismapped and the device read/writes go astray, detected as DMAR faults and leading to device failure. The behaviour changed (from working to broken) in commit fa954e683178 ("iommu/vt-d: Delegate the dma domain to upper layer"), but the error looks older. Fixes: fa954e683178 ("iommu/vt-d: Delegate the dma domain to upper layer") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: James Sewart <jamessewart@arista.com> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: <stable@vger.kernel.org> # v5.3+ Link: https://lore.kernel.org/r/20200822160209.28512-1-chris@chris-wilson.co.uk Signed-off-by: Joerg Roedel <jroedel@suse.de> 04 September 2020, 10:14:28 UTC
2822e58 Joerg Roedel 24 August 2020, 10:54:15 UTC iommu/amd: Do not use IOMMUv2 functionality when SME is active When memory encryption is active the device is likely not in a direct mapped domain. Forbid using IOMMUv2 functionality for now until finer grained checks for this have been implemented. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200824105415.21000-3-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de> 04 September 2020, 10:07:08 UTC
7cad554 Joerg Roedel 24 August 2020, 10:54:14 UTC iommu/amd: Do not force direct mapping when SME is active Do not force devices supporting IOMMUv2 to be direct mapped when memory encryption is active. This might cause them to be unusable because their DMA mask does not include the encryption bit. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200824105415.21000-2-joro@8bytes.org Signed-off-by: Joerg Roedel <jroedel@suse.de> 04 September 2020, 10:07:08 UTC
e52d58d Suravee Suthikulpanit 03 September 2020, 09:38:22 UTC iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE When using 128-bit interrupt-remapping table entry (IRTE) (a.k.a GA mode), current driver disables interrupt remapping when it updates the IRTE so that the upper and lower 64-bit values can be updated safely. However, this creates a small window, where the interrupt could arrive and result in IO_PAGE_FAULT (for interrupt) as shown below. IOMMU Driver Device IRQ ============ =========== irte.RemapEn=0 ... change IRTE IRQ from device ==> IO_PAGE_FAULT !! ... irte.RemapEn=1 This scenario has been observed when changing irq affinity on a system running I/O-intensive workload, in which the destination APIC ID in the IRTE is updated. Instead, use cmpxchg_double() to update the 128-bit IRTE at once without disabling the interrupt remapping. However, this means several features, which require GA (128-bit IRTE) support will also be affected if cmpxchg16b is not supported (which is unprecedented for AMD processors w/ IOMMU). Fixes: 880ac60e2538 ("iommu/amd: Introduce interrupt remapping ops structure") Reported-by: Sean Osborne <sean.m.osborne@oracle.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Erik Rockstrom <erik.rockstrom@oracle.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Link: https://lore.kernel.org/r/20200903093822.52012-3-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de> 04 September 2020, 09:53:18 UTC
26e495f Suravee Suthikulpanit 03 September 2020, 09:38:21 UTC iommu/amd: Restore IRTE.RemapEn bit after programming IRTE Currently, the RemapEn (valid) bit is accidentally cleared when programming IRTE w/ guestMode=0. It should be restored to the prior state. Fixes: b9fc6b56f478 ("iommu/amd: Implements irq_set_vcpu_affinity() hook to setup vapic mode for pass-through devices") Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Link: https://lore.kernel.org/r/20200903093822.52012-2-suravee.suthikulpanit@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de> 04 September 2020, 09:53:10 UTC
a5f785c Dmitry Osipenko 17 August 2020, 23:58:54 UTC thermal: core: Fix use-after-free in thermal_zone_device_unregister() The user-after-free bug in thermal_zone_device_unregister() is reported by KASAN. It happens because struct thermal_zone_device is released during of device_unregister() invocation, and hence the "tz" variable shouldn't be touched by thermal_notify_tz_delete(tz->id). Fixes: 55cdf0a283b8 ("thermal: core: Add notifications call in the framework") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200817235854.26816-1-digetx@gmail.com 04 September 2020, 09:52:54 UTC
0ffdab6 Veera Vegivada 29 July 2020, 16:52:51 UTC thermal: qcom-spmi-temp-alarm: Don't suppress negative temp Currently driver is suppressing the negative temperature readings from the vadc. Consumers of the thermal zones need to read the negative temperature too. Don't suppress the readings. Fixes: c610afaa21d3c6e ("thermal: Add QPNP PMIC temperature alarm driver") Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/944856eb819081268fab783236a916257de120e4.1596040416.git.gurus@codeaurora.org 04 September 2020, 09:52:54 UTC
30d24fa Tony Lindgren 06 July 2020, 18:33:38 UTC thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430 We can sometimes get bogus thermal shutdowns on omap4430 at least with droid4 running idle with a battery charger connected: thermal thermal_zone0: critical temperature reached (143 C), shutting down Dumping out the register values shows we can occasionally get a 0x7f value that is outside the TRM listed values in the ADC conversion table. And then we get a normal value when reading again after that. Reading the register multiple times does not seem help avoiding the bogus values as they stay until the next sample is ready. Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we should have values from 13 to 107 listed with a total of 95 values. But looking at the omap4430_adc_to_temp array, the values are off, and the end values are missing. And it seems that the 4430 ADC table is similar to omap3630 rather than omap4460. Let's fix the issue by using values based on the omap3630 table and just ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has the missing values added while the TRM table only shows every second value. Note that sometimes the ADC register values within the valid table can also be way off for about 1 out of 10 values. But it seems that those just show about 25 C too low values rather than too high values. So those do not cause a bogus thermal shutdown. Fixes: 1a31270e54d7 ("staging: omap-thermal: add OMAP4 data structures") Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com 04 September 2020, 09:52:46 UTC
2d33b7d Lu Baolu 03 September 2020, 06:51:32 UTC iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set() The dev_iommu_priv_set() must be called after probe_device(). This fixes a NULL pointer deference bug when booting a system with kernel cmdline "intel_iommu=on,igfx_off", where the dev_iommu_priv_set() is abused. The following stacktrace was produced: Command line: BOOT_IMAGE=/isolinux/bzImage console=tty1 intel_iommu=on,igfx_off ... DMAR: Host address width 39 DMAR: DRHD base: 0x000000fed90000 flags: 0x0 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e DMAR: DRHD base: 0x000000fed91000 flags: 0x1 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da DMAR: RMRR base: 0x0000009aa9f000 end: 0x0000009aabefff DMAR: RMRR base: 0x0000009d000000 end: 0x0000009f7fffff DMAR: No ATSR found BUG: kernel NULL pointer dereference, address: 0000000000000038 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.9.0-devel+ #2 Hardware name: LENOVO 20HGS0TW00/20HGS0TW00, BIOS N1WET46S (1.25s ) 03/30/2018 RIP: 0010:intel_iommu_init+0xed0/0x1136 Code: fe e9 61 02 00 00 bb f4 ff ff ff e9 57 02 00 00 48 63 d1 48 c1 e2 04 48 03 50 20 48 8b 12 48 85 d2 74 0b 48 8b 92 d0 02 00 00 48 89 7a 38 ff c1 e9 15 f5 ff ff 48 c7 c7 60 99 ac a7 49 c7 c7 a0 RSP: 0000:ffff96d180073dd0 EFLAGS: 00010282 RAX: ffff8c91037a7d20 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff RBP: ffff96d180073e90 R08: 0000000000000001 R09: ffff8c91039fe3c0 R10: 0000000000000226 R11: 0000000000000226 R12: 000000000000000b R13: ffff8c910367c650 R14: ffffffffa8426d60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8c9107480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000004b100a001 CR4: 00000000003706e0 Call Trace: ? _raw_spin_unlock_irqrestore+0x1f/0x30 ? call_rcu+0x10e/0x320 ? trace_hardirqs_on+0x2c/0xd0 ? rdinit_setup+0x2c/0x2c ? e820__memblock_setup+0x8b/0x8b pci_iommu_init+0x16/0x3f do_one_initcall+0x46/0x1e4 kernel_init_freeable+0x169/0x1b2 ? rest_init+0x9f/0x9f kernel_init+0xa/0x101 ret_from_fork+0x22/0x30 Modules linked in: CR2: 0000000000000038 ---[ end trace 3653722a6f936f18 ]--- Fixes: 01b9d4e21148c ("iommu/vt-d: Use dev_iommu_priv_get/set()") Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Link: https://lore.kernel.org/linux-iommu/96717683-70be-7388-3d2f-61131070a96a@secunet.com/ Link: https://lore.kernel.org/r/20200903065132.16879-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> 04 September 2020, 09:50:37 UTC
6e4e9ec Lu Baolu 28 August 2020, 00:06:15 UTC iommu/vt-d: Serialize IOMMU GCMD register modifications The VT-d spec requires (10.4.4 Global Command Register, GCMD_REG General Description) that: If multiple control fields in this register need to be modified, software must serialize the modifications through multiple writes to this register. However, in irq_remapping.c, modifications of IRE and CFI are done in one write. We need to do two separate writes with STS checking after each. It also checks the status register before writing command register to avoid unnecessary register write. Fixes: af8d102f999a4 ("x86/intel/irq_remapping: Clean up x2apic opt-out security warning mess") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Link: https://lore.kernel.org/r/20200828000615.8281-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> 04 September 2020, 09:39:21 UTC
365d2a2 Lukas Bulwahn 25 August 2020, 05:38:28 UTC MAINTAINERS: Update QUALCOMM IOMMU after Arm SMMU drivers move Commit e86d1aa8b60f ("iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory") moved drivers/iommu/qcom_iommu.c to drivers/iommu/arm/arm-smmu/qcom_iommu.c amongst other moves, adjusted some sections in MAINTAINERS, but missed adjusting the QUALCOMM IOMMU section. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: drivers/iommu/qcom_iommu.c Update the file entry in MAINTAINERS to the new location. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200825053828.4166-1-lukas.bulwahn@gmail.com Signed-off-by: Joerg Roedel <jroedel@suse.de> 04 September 2020, 09:20:48 UTC
9e2369c Roger Pau Monne 01 September 2020, 08:33:26 UTC xen: add helpers to allocate unpopulated memory To be used in order to create foreign mappings. This is based on the ZONE_DEVICE facility which is used by persistent memory devices in order to create struct pages and kernel virtual mappings for the IOMEM areas of such devices. Note that on kernels without support for ZONE_DEVICE Xen will fallback to use ballooned pages in order to create foreign mappings. The newly added helpers use the same parameters as the existing {alloc/free}_xenballooned_pages functions, which allows for in-place replacement of the callers. Once a memory region has been added to be used as scratch mapping space it will no longer be released, and pages returned are kept in a linked list. This allows to have a buffer of pages and prevents resorting to frequent additions and removals of regions. If enabled (because ZONE_DEVICE is supported) the usage of the new functionality untangles Xen balloon and RAM hotplug from the usage of unpopulated physical memory ranges to map foreign pages, which is the correct thing to do in order to avoid mappings of foreign pages depend on memory hotplug. Note the driver is currently not enabled on Arm platforms because it would interfere with the identity mapping required on some platforms. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20200901083326.21264-4-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com> 04 September 2020, 08:00:01 UTC
4533d3a Roger Pau Monne 01 September 2020, 08:33:25 UTC memremap: rename MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC This is in preparation for the logic behind MEMORY_DEVICE_DEVDAX also being used by non DAX devices. No functional change intended. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Link: https://lore.kernel.org/r/20200901083326.21264-3-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com> 04 September 2020, 07:59:59 UTC
aecb201 Roger Pau Monne 01 September 2020, 08:33:24 UTC xen/balloon: add header guard In order to protect against the header being included multiple times on the same compilation unit. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20200901083326.21264-2-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com> 04 September 2020, 07:59:53 UTC
ccae0f3 Huang Ying 04 September 2020, 06:10:47 UTC x86, fakenuma: Fix invalid starting node ID Commit: cc9aec03e58f ("x86/numa_emulation: Introduce uniform split capability") uses "-1" as the starting node ID, which causes the strange kernel log as follows, when "numa=fake=32G" is added to the kernel command line: Faking node -1 at [mem 0x0000000000000000-0x0000000893ffffff] (35136MB) Faking node 0 at [mem 0x0000001840000000-0x000000203fffffff] (32768MB) Faking node 1 at [mem 0x0000000894000000-0x000000183fffffff] (64192MB) Faking node 2 at [mem 0x0000002040000000-0x000000283fffffff] (32768MB) Faking node 3 at [mem 0x0000002840000000-0x000000303fffffff] (32768MB) And finally the kernel crashes: BUG: Bad page state in process swapper pfn:00011 page:(____ptrval____) refcount:0 mapcount:1 mapping:(____ptrval____) index:0x55cd7e44b270 pfn:0x11 failed to read mapping contents, not a valid kernel address? flags: 0x5(locked|uptodate) raw: 0000000000000005 000055cd7e44af30 000055cd7e44af50 0000000100000006 raw: 000055cd7e44b270 000055cd7e44b290 0000000000000000 000055cd7e44b510 page dumped because: page still charged to cgroup page->mem_cgroup:000055cd7e44b510 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.9.0-rc2 #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 Call Trace: dump_stack+0x57/0x80 bad_page.cold+0x63/0x94 __free_pages_ok+0x33f/0x360 memblock_free_all+0x127/0x195 mem_init+0x23/0x1f5 start_kernel+0x219/0x4f5 secondary_startup_64+0xb6/0xc0 Fix this bug via using 0 as the starting node ID. This restores the original behavior before cc9aec03e58f. [ mingo: Massaged the changelog. ] Fixes: cc9aec03e58f ("x86/numa_emulation: Introduce uniform split capability") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200904061047.612950-1-ying.huang@intel.com 04 September 2020, 06:56:13 UTC
5912690 Linus Torvalds 04 September 2020, 02:10:43 UTC Merge tag 'perf-tools-fixes-for-v5.9-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools fixes from Arnaldo Carvalho de Melo: - Use uintptr_t when casting numbers to pointers - Keep output expected by 3rd parties: Turn off summary for interval mode by default. - BPF is in kernel space, make sure do_validate_kcore_modules() knows about that. - Explicitly call out event modifiers in the documentation. - Fix jevents() allocation of space for regular expressions. - Address libtraceevent build warnings on 32-bit arches. - Fix checking of functions returns using ERR_PTR() in 'perf bench'. * tag 'perf-tools-fixes-for-v5.9-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Add bpf image check to __map__is_kmodule perf record/stat: Explicitly call out event modifiers in the documentation perf bench: The do_run_multi_threaded() function must use IS_ERR(perf_session__new()) perf stat: Turn off summary for interval mode by default libtraceevent: Fix build warning on 32-bit arches perf jevents: Fix suspicious code in fixregex() perf parse-events: Use uintptr_t when casting numbers to pointers 04 September 2020, 02:10:43 UTC
3e8d3bd Linus Torvalds 04 September 2020, 01:50:48 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ... 04 September 2020, 01:50:48 UTC
8381979 Linus Torvalds 04 September 2020, 01:43:06 UTC Merge branch 'gate-page-refcount' (patches from Dave Hansen) Merge gate page refcount fix from Dave Hansen: "During the conversion over to pin_user_pages(), gate pages were missed. The fix is pretty simple, and is accompanied by a new test from Andy which probably would have caught this earlier" * emailed patches from Dave Hansen <dave.hansen@linux.intel.com>: selftests/x86/test_vsyscall: Improve the process_vm_readv() test mm: fix pin vs. gup mismatch with gate pages 04 September 2020, 01:43:06 UTC
8891adc Andy Lutomirski 03 September 2020, 20:40:30 UTC selftests/x86/test_vsyscall: Improve the process_vm_readv() test The existing code accepted process_vm_readv() success or failure as long as it didn't return garbage. This is too weak: if the vsyscall page is readable, then process_vm_readv() should succeed and, if the page is not readable, then it should fail. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2020, 01:36:55 UTC
9fa2dd9 Dave Hansen 03 September 2020, 20:40:28 UTC mm: fix pin vs. gup mismatch with gate pages Gate pages were missed when converting from get to pin_user_pages(). This can lead to refcount imbalances. This is reliably and quickly reproducible running the x86 selftests when vsyscall=emulate is enabled (the default). Fix by using try_grab_page() with appropriate flags passed. The long story: Today, pin_user_pages() and get_user_pages() are similar interfaces for manipulating page reference counts. However, "pins" use a "bias" value and manipulate the actual reference count by 1024 instead of 1 used by plain "gets". That means that pin_user_pages() must be matched with unpin_user_pages() and can't be mixed with a plain put_user_pages() or put_page(). Enter gate pages, like the vsyscall page. They are pages usually in the kernel image, but which are mapped to userspace. Userspace is allowed access to them, including interfaces using get/pin_user_pages(). The refcount of these kernel pages is manipulated just like a normal user page on the get/pin side so that the put/unpin side can work the same for normal user pages or gate pages. get_gate_page() uses try_get_page() which only bumps the refcount by 1, not 1024, even if called in the pin_user_pages() path. If someone pins a gate page, this happens: pin_user_pages() get_gate_page() try_get_page() // bump refcount +1 ... some time later unpin_user_pages() page_ref_sub_and_test(page, 1024)) ... and boom, we get a refcount off by 1023. This is reliably and quickly reproducible running the x86 selftests when booted with vsyscall=emulate (the default). The selftests use ptrace(), but I suspect anything using pin_user_pages() on gate pages could hit this. To fix it, simply use try_grab_page() instead of try_get_page(), and pass 'gup_flags' in so that FOLL_PIN can be respected. This bug traces back to the very beginning of the FOLL_PIN support in commit 3faa52c03f44 ("mm/gup: track FOLL_PIN pages"), which showed up in the 5.7 release. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Fixes: 3faa52c03f44 ("mm/gup: track FOLL_PIN pages") Reported-by: Peter Zijlstra <peterz@infradead.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: x86@kernel.org Cc: Jann Horn <jannh@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 September 2020, 01:36:55 UTC
d37d569 Dave Airlie 04 September 2020, 01:14:24 UTC Merge branch 'linux-5.9' of git://github.com/skeggsb/linux into drm-fixes A couple of minor fixes to the display changes that went in for 5.9. The most important of which is a workaround for a HW bug that was exposed by better push buffer space management, leading to random(ish...) display engine hangs. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5QDxyMihrxbPk+-sORnaYtjR6_dbM68gEhb2wxht_G1w@mail.gmail.com 04 September 2020, 01:14:49 UTC
0f8aeef Dave Airlie 04 September 2020, 01:00:47 UTC Merge tag 'drm-intel-fixes-2020-09-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.9-rc4: - Clang build warning fix - HDCP fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87sgbz2pnx.fsf@intel.com 04 September 2020, 01:00:48 UTC
b596649 Dave Airlie 04 September 2020, 00:51:27 UTC Merge tag 'amd-drm-fixes-5.9-2020-09-03' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-09-03: amdgpu: - Fix for 32bit systems - SW CTF fix - Update for Sienna Cichlid - CIK bug fixes radeon: - PLL fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200903050022.3960-1-alexander.deucher@amd.com 04 September 2020, 00:51:28 UTC
b61ac5b David S. Miller 03 September 2020, 23:52:33 UTC Merge branch 'smc-fixes' Karsten Graul says: ==================== net/smc: fixes 2020-09-03 Please apply the following patch series for smc to netdev's net tree. Patch 1 fixes the toleration of older SMC implementations. Patch 2 takes care of a problem that happens when SMCR is used after SMCD initialization failed. Patch 3 fixes a problem with freed send buffers, and patch 4 corrects refcounting when SMC terminates due to device removal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 03 September 2020, 23:52:33 UTC
5fb8642 Ursula Braun 03 September 2020, 19:53:18 UTC net/smc: fix sock refcounting in case of termination When an ISM device is removed, all its linkgroups are terminated, i.e. all the corresponding connections are killed. Connection killing invokes smc_close_active_abort(), which decreases the sock refcount for certain states to simulate passive closing. And it cancels the close worker and has to give up the sock lock for this timeframe. This opens the door for a passive close worker or a socket close to run in between. In this case smc_close_active_abort() and passive close worker resp. smc_release() might do a sock_put for passive closing. This causes: [ 1323.315943] refcount_t: underflow; use-after-free. [ 1323.316055] WARNING: CPU: 3 PID: 54469 at lib/refcount.c:28 refcount_warn_saturate+0xe8/0x130 [ 1323.316069] Kernel panic - not syncing: panic_on_warn set ... [ 1323.316084] CPU: 3 PID: 54469 Comm: uperf Not tainted 5.9.0-20200826.rc2.git0.46328853ed20.300.fc32.s390x+debug #1 [ 1323.316096] Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0) [ 1323.316108] Call Trace: [ 1323.316125] [<00000000c0d4aae8>] show_stack+0x90/0xf8 [ 1323.316143] [<00000000c15989b0>] dump_stack+0xa8/0xe8 [ 1323.316158] [<00000000c0d8344e>] panic+0x11e/0x288 [ 1323.316173] [<00000000c0d83144>] __warn+0xac/0x158 [ 1323.316187] [<00000000c1597a7a>] report_bug+0xb2/0x130 [ 1323.316201] [<00000000c0d36424>] monitor_event_exception+0x44/0xc0 [ 1323.316219] [<00000000c195c716>] pgm_check_handler+0x1da/0x238 [ 1323.316234] [<00000000c151844c>] refcount_warn_saturate+0xec/0x130 [ 1323.316280] ([<00000000c1518448>] refcount_warn_saturate+0xe8/0x130) [ 1323.316310] [<000003ff801f2e2a>] smc_release+0x192/0x1c8 [smc] [ 1323.316323] [<00000000c169f1fa>] __sock_release+0x5a/0xe0 [ 1323.316334] [<00000000c169f2ac>] sock_close+0x2c/0x40 [ 1323.316350] [<00000000c1086de0>] __fput+0xb8/0x278 [ 1323.316362] [<00000000c0db1e0e>] task_work_run+0x76/0xb8 [ 1323.316393] [<00000000c0d8ab84>] do_exit+0x26c/0x520 [ 1323.316408] [<00000000c0d8af08>] do_group_exit+0x48/0xc0 [ 1323.316421] [<00000000c0d8afa8>] __s390x_sys_exit_group+0x28/0x38 [ 1323.316433] [<00000000c195c32c>] system_call+0xe0/0x2b4 [ 1323.316446] 1 lock held by uperf/54469: [ 1323.316456] #0: 0000000044125e60 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x44/0xe0 The patch rechecks sock state in smc_close_active_abort() after smc_close_cancel_work() to avoid duplicate decrease of sock refcount for the same purpose. Fixes: 611b63a12732 ("net/smc: cancel tx worker in case of socket aborts") Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 September 2020, 23:52:33 UTC
1d8df41 Ursula Braun 03 September 2020, 19:53:17 UTC net/smc: reset sndbuf_desc if freed When an SMC connection is created, and there is a problem to create an RMB or DMB, the previously created send buffer is thrown away as well including buffer descriptor freeing. Make sure the connection no longer references the freed buffer descriptor, otherwise bugs like this are possible: [71556.835148] ============================================================================= [71556.835168] BUG kmalloc-128 (Tainted: G B OE ): Poison overwritten [71556.835172] ----------------------------------------------------------------------------- [71556.835179] INFO: 0x00000000d20894be-0x00000000aaef63e9 @offset=2724. First byte 0x0 instead of 0x6b [71556.835215] INFO: Allocated in __smc_buf_create+0x184/0x578 [smc] age=0 cpu=5 pid=46726 [71556.835234] ___slab_alloc+0x5a4/0x690 [71556.835239] __slab_alloc.constprop.0+0x70/0xb0 [71556.835243] kmem_cache_alloc_trace+0x38e/0x3f8 [71556.835250] __smc_buf_create+0x184/0x578 [smc] [71556.835257] smc_buf_create+0x2e/0xe8 [smc] [71556.835264] smc_listen_work+0x516/0x6a0 [smc] [71556.835275] process_one_work+0x280/0x478 [71556.835280] worker_thread+0x66/0x368 [71556.835287] kthread+0x17a/0x1a0 [71556.835294] ret_from_fork+0x28/0x2c [71556.835301] INFO: Freed in smc_buf_create+0xd8/0xe8 [smc] age=0 cpu=5 pid=46726 [71556.835307] __slab_free+0x246/0x560 [71556.835311] kfree+0x398/0x3f8 [71556.835318] smc_buf_create+0xd8/0xe8 [smc] [71556.835324] smc_listen_work+0x516/0x6a0 [smc] [71556.835328] process_one_work+0x280/0x478 [71556.835332] worker_thread+0x66/0x368 [71556.835337] kthread+0x17a/0x1a0 [71556.835344] ret_from_fork+0x28/0x2c [71556.835348] INFO: Slab 0x00000000a0744551 objects=51 used=51 fp=0x0000000000000000 flags=0x1ffff00000010200 [71556.835352] INFO: Object 0x00000000563480a1 @offset=2688 fp=0x00000000289567b2 [71556.835359] Redzone 000000006783cde2: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835363] Redzone 00000000e35b876e: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835367] Redzone 0000000023074562: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835372] Redzone 00000000b9564b8c: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835376] Redzone 00000000810c6362: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835380] Redzone 0000000065ef52c3: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835384] Redzone 00000000c5dd6984: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835388] Redzone 000000004c480f8f: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835392] Object 00000000563480a1: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835397] Object 000000009c479d06: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835401] Object 000000006e1dce92: 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b kkkk....kkkkkkkk [71556.835405] Object 00000000227f7cf8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835410] Object 000000009a701215: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835414] Object 000000003731ce76: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835418] Object 00000000f7085967: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835422] Object 0000000007f99927: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. [71556.835427] Redzone 00000000579c4913: bb bb bb bb bb bb bb bb ........ [71556.835431] Padding 00000000305aef82: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835435] Padding 00000000b1cdd722: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835438] Padding 00000000c7568199: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835442] Padding 00000000fad4c4d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835451] CPU: 0 PID: 47939 Comm: kworker/0:15 Tainted: G B OE 5.9.0-rc1uschi+ #54 [71556.835456] Hardware name: IBM 3906 M03 703 (LPAR) [71556.835464] Workqueue: events smc_listen_work [smc] [71556.835470] Call Trace: [71556.835478] [<00000000d5eaeb10>] show_stack+0x90/0xf8 [71556.835493] [<00000000d66fc0f8>] dump_stack+0xa8/0xe8 [71556.835499] [<00000000d61a511c>] check_bytes_and_report+0x104/0x130 [71556.835504] [<00000000d61a57b2>] check_object+0x26a/0x2e0 [71556.835509] [<00000000d61a59bc>] alloc_debug_processing+0x194/0x238 [71556.835514] [<00000000d61a8c14>] ___slab_alloc+0x5a4/0x690 [71556.835519] [<00000000d61a9170>] __slab_alloc.constprop.0+0x70/0xb0 [71556.835524] [<00000000d61aaf66>] kmem_cache_alloc_trace+0x38e/0x3f8 [71556.835530] [<000003ff80549bbc>] __smc_buf_create+0x184/0x578 [smc] [71556.835538] [<000003ff8054a396>] smc_buf_create+0x2e/0xe8 [smc] [71556.835545] [<000003ff80540c16>] smc_listen_work+0x516/0x6a0 [smc] [71556.835549] [<00000000d5f0f448>] process_one_work+0x280/0x478 [71556.835554] [<00000000d5f0f6a6>] worker_thread+0x66/0x368 [71556.835559] [<00000000d5f18692>] kthread+0x17a/0x1a0 [71556.835563] [<00000000d6abf3b8>] ret_from_fork+0x28/0x2c [71556.835569] INFO: lockdep is turned off. [71556.835573] FIX kmalloc-128: Restoring 0x00000000d20894be-0x00000000aaef63e9=0x6b [71556.835577] FIX kmalloc-128: Marking all objects used Fixes: fd7f3a746582 ("net/smc: remove freed buffer from list") Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 September 2020, 23:52:33 UTC
2d2bfeb Ursula Braun 03 September 2020, 19:53:16 UTC net/smc: set rx_off for SMCR explicitly SMC tries to make use of SMCD first. If a problem shows up, it tries to switch to SMCR. If the SMCD initializing problem shows up after the SMCD connection has already been initialized, field rx_off keeps the wrong SMCD value for SMCR, which results in corrupted data at the receiver. This patch adds an explicit (re-)setting of field rx_off to zero if the connection uses SMCR. Fixes: be244f28d22f ("net/smc: add SMC-D support in data transfer") Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 September 2020, 23:52:33 UTC
fffe83c Karsten Graul 03 September 2020, 19:53:15 UTC net/smc: fix toleration of fake add_link messages Older SMCR implementations had no link failover support and used one link only. Because the handshake protocol requires to try the establishment of a second link the old code sent a fake add_link message and declined any server response afterwards. The current code supports multiple links and inspects the received fake add_link message more closely. To tolerate the fake add_link messages smc_llc_is_local_add_link() needs an improved check of the message to be able to separate between locally enqueued and fake add_link messages. And smc_llc_cli_add_link() needs to check if the provided qp_mtu size is invalid and reject the add_link request in that case. Fixes: c48254fa48e5 ("net/smc: move add link processing for new device into llc layer") Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 September 2020, 23:52:33 UTC
5566993 Michael Chan 03 September 2020, 18:28:54 UTC tg3: Fix soft lockup when tg3_reset_task() fails. If tg3_reset_task() fails, the device state is left in an inconsistent state with IFF_RUNNING still set but NAPI state not enabled. A subsequent operation, such as ifdown or AER error can cause it to soft lock up when it tries to disable NAPI state. Fix it by bringing down the device to !IFF_RUNNING state when tg3_reset_task() fails. tg3_reset_task() running from workqueue will now call tg3_close() when the reset fails. We need to modify tg3_reset_task_cancel() slightly to avoid tg3_close() calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise cancel_work_sync() will wait forever for tg3_reset_task() to finish. Reported-by: David Christensen <drc@linux.vnet.ibm.com> Reported-by: Baptiste Covolato <baptiste@arista.com> Fixes: db2199737990 ("tg3: Schedule at most one tg3_reset_task run") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 September 2020, 19:16:54 UTC
830fadf Jiri Olsa 26 August 2020, 21:30:17 UTC perf tools: Add bpf image check to __map__is_kmodule When validating kcore modules the do_validate_kcore_modules function checks on every kernel module dso against modules record. The __map__is_kmodule check is used to get only kernel module dso objects through. Currently the bpf images are slipping through the check and making the validation to fail, so report falls back from kcore usage to kallsyms. Adding __map__is_bpf_image check for bpf image and adding it to __map__is_kmodule check. Fixes: 3c29d4483e85 ("perf annotate: Add basic support for bpf_image") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200826213017.818788-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 03 September 2020, 19:04:46 UTC
e48a73a Kim Phillips 01 September 2020, 21:58:53 UTC perf record/stat: Explicitly call out event modifiers in the documentation Event modifiers are not mentioned in the perf record or perf stat manpages. Add them to orient new users more effectively by pointing them to the perf list manpage for details. Fixes: 2055fdaf8703 ("perf list: Document precise event sampling for AMD IBS") Signed-off-by: Kim Phillips <kim.phillips@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tony Jones <tonyj@suse.de> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 03 September 2020, 19:00:37 UTC
e4d71f7 YueHaibing 02 September 2020, 14:05:26 UTC perf bench: The do_run_multi_threaded() function must use IS_ERR(perf_session__new()) In case of error, the function perf_session__new() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR() Committer notes: This wasn't compiling due to an extraneous '{' not matched by a '}', fix it. Fixes: 13edc237200c ("perf bench: Add a multi-threaded synthesize benchmark") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200902140526.26916-1-yuehaibing@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 03 September 2020, 18:55:56 UTC
ee6a961 Jin Yao 03 September 2020, 01:01:13 UTC perf stat: Turn off summary for interval mode by default There's a risk that outputting interval mode summaries by default breaks CSV consumers. It already broke pmu-tools/toplev. So now we turn off the summary by default but we create a new option '--summary' to enable the summary. This is active even when not using CSV mode. Before: root@kbl-ppc:~# perf stat -I1000 --interval-count 2 # time counts unit events 1.000265904 8,005.73 msec cpu-clock # 8.006 CPUs utilized 1.000265904 601 context-switches # 0.075 K/sec 1.000265904 10 cpu-migrations # 0.001 K/sec 1.000265904 0 page-faults # 0.000 K/sec 1.000265904 66,746,521 cycles # 0.008 GHz 1.000265904 71,874,398 instructions # 1.08 insn per cycle 1.000265904 13,356,781 branches # 1.668 M/sec 1.000265904 298,756 branch-misses # 2.24% of all branches 2.001857667 8,012.52 msec cpu-clock # 8.013 CPUs utilized 2.001857667 164 context-switches # 0.020 K/sec 2.001857667 10 cpu-migrations # 0.001 K/sec 2.001857667 2 page-faults # 0.000 K/sec 2.001857667 5,822,188 cycles # 0.001 GHz 2.001857667 2,186,170 instructions # 0.38 insn per cycle 2.001857667 442,378 branches # 0.055 M/sec 2.001857667 44,750 branch-misses # 10.12% of all branches Performance counter stats for 'system wide': 16,018.25 msec cpu-clock # 7.993 CPUs utilized 765 context-switches # 0.048 K/sec 20 cpu-migrations # 0.001 K/sec 2 page-faults # 0.000 K/sec 72,568,709 cycles # 0.005 GHz 74,060,568 instructions # 1.02 insn per cycle 13,799,159 branches # 0.861 M/sec 343,506 branch-misses # 2.49% of all branches 2.004118489 seconds time elapsed After: root@kbl-ppc:~# perf stat -I1000 --interval-count 2 # time counts unit events 1.001336393 8,013.28 msec cpu-clock # 8.013 CPUs utilized 1.001336393 82 context-switches # 0.010 K/sec 1.001336393 8 cpu-migrations # 0.001 K/sec 1.001336393 0 page-faults # 0.000 K/sec 1.001336393 4,199,121 cycles # 0.001 GHz 1.001336393 1,373,991 instructions # 0.33 insn per cycle 1.001336393 270,681 branches # 0.034 M/sec 1.001336393 31,659 branch-misses # 11.70% of all branches 2.003905006 8,020.52 msec cpu-clock # 8.021 CPUs utilized 2.003905006 184 context-switches # 0.023 K/sec 2.003905006 8 cpu-migrations # 0.001 K/sec 2.003905006 2 page-faults # 0.000 K/sec 2.003905006 5,446,190 cycles # 0.001 GHz 2.003905006 2,312,547 instructions # 0.42 insn per cycle 2.003905006 451,691 branches # 0.056 M/sec 2.003905006 37,925 branch-misses # 8.40% of all branches root@kbl-ppc:~# perf stat -I1000 --interval-count 2 --summary # time counts unit events 1.001313128 8,013.20 msec cpu-clock # 8.013 CPUs utilized 1.001313128 83 context-switches # 0.010 K/sec 1.001313128 8 cpu-migrations # 0.001 K/sec 1.001313128 0 page-faults # 0.000 K/sec 1.001313128 4,470,950 cycles # 0.001 GHz 1.001313128 1,440,045 instructions # 0.32 insn per cycle 1.001313128 283,222 branches # 0.035 M/sec 1.001313128 33,576 branch-misses # 11.86% of all branches 2.003857385 8,020.34 msec cpu-clock # 8.020 CPUs utilized 2.003857385 154 context-switches # 0.019 K/sec 2.003857385 8 cpu-migrations # 0.001 K/sec 2.003857385 2 page-faults # 0.000 K/sec 2.003857385 4,515,676 cycles # 0.001 GHz 2.003857385 2,180,449 instructions # 0.48 insn per cycle 2.003857385 435,254 branches # 0.054 M/sec 2.003857385 31,179 branch-misses # 7.16% of all branches Performance counter stats for 'system wide': 16,033.53 msec cpu-clock # 7.992 CPUs utilized 237 context-switches # 0.015 K/sec 16 cpu-migrations # 0.001 K/sec 2 page-faults # 0.000 K/sec 8,986,626 cycles # 0.001 GHz 3,620,494 instructions # 0.40 insn per cycle 718,476 branches # 0.045 M/sec 64,755 branch-misses # 9.01% of all branches 2.006124542 seconds time elapsed Fixes: c7e5b328a8d4 ("perf stat: Report summary for interval mode") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200903010113.32232-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 03 September 2020, 18:48:41 UTC
10a6f5c Tzvetomir Stoyanov (VMware) 02 September 2020, 10:31:21 UTC libtraceevent: Fix build warning on 32-bit arches Fixed a compilation warning for casting to pointer from integer of different size on 32-bit platforms. Reported-by: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: linux-trace-devel@vger.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 03 September 2020, 18:45:15 UTC
e62458e Namhyung Kim 03 September 2020, 15:25:10 UTC perf jevents: Fix suspicious code in fixregex() The new string should have enough space for the original string and the back slashes IMHO. Fixes: fbc2844e84038ce3 ("perf vendor events: Use more flexible pattern matching for CPU identification for mapfile.csv") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: William Cohen <wcohen@redhat.com> Link: http://lore.kernel.org/lkml/20200903152510.489233-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 03 September 2020, 18:38:05 UTC
0823f76 Arnaldo Carvalho de Melo 03 September 2020, 18:34:20 UTC perf parse-events: Use uintptr_t when casting numbers to pointers To address these errors found when cross building from x86_64 to MIPS little endian 32-bit: CC /tmp/build/perf/util/parse-events-bison.o util/parse-events.y: In function 'parse_events_parse': util/parse-events.y:514:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 514 | (void *) $2, $6, $4); | ^ util/parse-events.y:531:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 531 | (void *) $2, NULL, $4)) { | ^ util/parse-events.y:547:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 547 | (void *) $2, $4, 0); | ^ util/parse-events.y:564:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 564 | (void *) $2, NULL, 0)) { | ^ Fixes: cabbf26821aa210f ("perf parse: Before yyabort-ing free components") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 03 September 2020, 18:34:20 UTC
af0ae99 Paul Barker 03 September 2020, 08:49:25 UTC doc: net: dsa: Fix typo in config code sample In the "single port" example code for configuring a DSA switch without tagging support from userspace the command to bring up the "lan2" link was typo'd. Signed-off-by: Paul Barker <pbarker@konsulko.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 September 2020, 17:38:22 UTC
e28f010 Linus Torvalds 03 September 2020, 17:05:48 UTC Merge tag 'fixes-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull misc build failure fixes from Mike Rapoport: "Fix min_low_pfn/max_low_pfn build errors on ia64 and microblaze. Some configurations of ia64 and microblaze use min_low_pfn and max_low_pfn in pfn_valid(). This causes build failures for modules that use pfn_valid(). The fix is to add EXPORT_SYMBOL() for these variables on ia64 and microblaze" * tag 'fixes-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: ia64: fix min_low_pfn/max_low_pfn build errors microblaze: fix min_low_pfn/max_low_pfn build errors 03 September 2020, 17:05:48 UTC
26acd8b Linus Torvalds 03 September 2020, 15:41:36 UTC Merge tag 'affs-for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull affs fix from David Sterba: "One fix to make permissions work the same way as on AmigaOS" * tag 'affs-for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: affs: fix basic permission bits to actually work 03 September 2020, 15:41:36 UTC
d0c20d3 Darrick J. Wong 02 September 2020, 17:47:02 UTC xfs: fix xfs_bmap_validate_extent_raw when checking attr fork of rt files The realtime flag only applies to the data fork, so don't use the realtime block number checks on the attr fork of a realtime file. Fixes: 30b0984d9117 ("xfs: refactor bmap record validation") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> 03 September 2020, 15:33:50 UTC
0fdf68c Linus Torvalds 03 September 2020, 15:22:16 UTC Merge tag 'media/v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a compilation fix issue with ti-vpe on arm 32 bits - two Kconfig fixes for imx214 and max9286 drivers - a kernel information leak at v4l2-core on time32 compat ioctls - some fixes at rc core unbind logic - a fix at mceusb driver for it to not use GFP_ATOMIC - fixes at cedrus and vicodec drivers at the control handling logic - a fix at gpio-ir-tx to avoid disabling interruts on a spinlock * tag 'media/v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: mceusb: Avoid GFP_ATOMIC where it is not needed media: gpio-ir-tx: spinlock is not needed to disable interrupts media: rc: do not access device via sysfs after rc_unregister_device() media: rc: uevent sysfs file races with rc_unregister_device() media: max9286: Depend on OF_GPIO media: i2c: imx214: select V4L2_FWNODE media: cedrus: Add missing v4l2_ctrl_request_hdl_put() media: vicodec: add missing v4l2_ctrl_request_hdl_put() media: media/v4l2-core: Fix kernel-infoleak in video_put_user() media: ti-vpe: cal: Fix compilation on 32-bit ARM 03 September 2020, 15:22:16 UTC
6a6660d Takashi Iwai 03 September 2020, 08:33:00 UTC ALSA: hda/realtek - Improved routing for Thinkpad X1 7th/8th Gen There've been quite a few regression reports about the lowered volume (reduced to ca 65% from the previous level) on Lenovo Thinkpad X1 after the commit d2cd795c4ece ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen"). Although the commit itself does the right thing from HD-audio POV in order to have a volume control for bass speakers, it seems that the machine has some secret recipe under the hood. Through experiments, Benjamin Poirier found out that the following routing gives the best result: * DAC1 (NID 0x02) -> Speaker pin (NID 0x14) * DAC2 (NID 0x03) -> Shared by both Bass Speaker pin (NID 0x17) & Headphone pin (0x21) * DAC3 (NID 0x06) -> Unused DAC1 seems to have some equalizer internally applied, and you'd get again the output in a bad quality if you connect this to the headphone pin. Hence the headphone is connected to DAC2, which is now shared with the bass speaker pin. DAC3 has no volume amp, hence it's not connected at all. For achieving the routing above, this patch introduced a couple of workarounds: * The connection list of bass speaker pin (NID 0x17) is reduced not to include DAC3 (NID 0x06) * Pass preferred_pairs array to specify the fixed connection Here, both workarounds are needed because the generic parser prefers the individual DAC assignment over others. When the routing above is applied, the generic parser creates the two volume controls "Front" and "Bass Speaker". Since we have only two DACs for three output pins, those are not fully controlling each output individually, and it would confuse PulseAudio. For avoiding the pitfall, in this patch, we rename those volume controls to some unique ones ("DAC1" and "DAC2"). Then PulseAudio ignore them and concentrate only on the still good-working "Master" volume control. If a user still wants to control each DAC volume, they can still change manually via "DAC1" and "DAC2" volume controls. Fixes: d2cd795c4ece ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen") Reported-by: Benjamin Poirier <benjamin.poirier@gmail.com> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207407#c10 BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3214171 BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3276276 Link: https://lore/kernel.org/r/20200829112746.3118-1-benjamin.poirier@gmail.com Link: https://lore.kernel.org/r/20200903083300.6333-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> 03 September 2020, 10:49:12 UTC
back to top