Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
d45331b Linus Torvalds 11 August 2019, 20:26:41 UTC Linux 5.3-rc4 11 August 2019, 20:26:41 UTC
b6c0649 Linus Torvalds 11 August 2019, 20:15:10 UTC Merge tag 'dax-fixes-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull dax fixes from Dan Williams: "A filesystem-dax and device-dax fix for v5.3. The filesystem-dax fix is tagged for stable as the implementation has been mistakenly throwing away all cow pages on any truncate or hole punch operation as part of the solution to coordinate device-dma vs truncate to dax pages. The device-dax change fixes up a regression this cycle from the introduction of a common 'internal per-cpu-ref' implementation. Summary: - Fix dax_layout_busy_page() to not discard private cow pages of fs/dax private mappings. - Update the memremap_pages core to properly cleanup on behalf of internal reference-count users like device-dax" * tag 'dax-fixes-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: mm/memremap: Fix reuse of pgmap instances with internal references dax: dax_layout_busy_page() should not unmap cow pages 11 August 2019, 20:15:10 UTC
f6192cb Linus Torvalds 11 August 2019, 17:13:53 UTC Merge tag 'ntb-5.3-bugfixes' of git://github.com/jonmason/ntb Pull NTB fix from Jon Mason: "Bug fix for NTB MSI kernel compile warning" * tag 'ntb-5.3-bugfixes' of git://github.com/jonmason/ntb: NTB/msi: remove incorrect MODULE defines 11 August 2019, 17:13:53 UTC
296d05c Linus Torvalds 10 August 2019, 23:31:47 UTC Merge tag 'riscv/for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Paul Walmsley: "A few minor RISC-V updates for v5.3-rc4: - Remove __udivdi3() from the 32-bit Linux port, converting the only upstream user to use do_div(), per Linux policy - Convert the RISC-V standard clocksource away from per-cpu data structures, since only one is used by Linux, even on a multi-CPU system - A set of DT binding updates that remove an obsolete text binding in favor of a YAML binding, fix a bogus compatible string in the schema (thus fixing a "make dtbs_check" warning), and clarifies the future values expected in one of the RISC-V CPU properties" * tag 'riscv/for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board dt-bindings: riscv: remove obsolete cpus.txt RISC-V: Remove udivdi3 riscv: delay: use do_div() instead of __udivdi3() dt-bindings: Update the riscv,isa string description RISC-V: Remove per cpu clocksource 10 August 2019, 23:31:47 UTC
6d8f809 Linus Torvalds 10 August 2019, 23:24:03 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A few fixes for x86: - Don't reset the carefully adjusted build flags for the purgatory and remove the unwanted flags instead. The 'reset all' approach led to build fails under certain circumstances. - Unbreak CLANG build of the purgatory by avoiding the builtin memcpy/memset implementations. - Address missing prototype warnings by including the proper header - Fix yet more fall-through issues" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/lib/cpu: Address missing prototypes warning x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS x86/purgatory: Do not use __builtin_memcpy and __builtin_memset x86: mtrr: cyrix: Mark expected switch fall-through x86/ptrace: Mark expected switch fall-through 10 August 2019, 23:24:03 UTC
d2359a5 Linus Torvalds 10 August 2019, 23:19:02 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Thomas Gleixner: "Perf tooling fixes all over the place: - Fix the selection of the main thread COMM in db-export - Fix the disassemmbly display for BPF in annotate - Fix cpumap mask setup in perf ftrace when only one CPU is present - Add the missing 'cpu_clk_unhalted.core' event - Fix CPU 0 bindings in NUMA benchmarks - Fix the module size calculations for s390 - Handle the gap between kernel end and module start on s390 correctly - Build and typo fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf pmu-events: Fix missing "cpu_clk_unhalted.core" event perf annotate: Fix s390 gap between kernel end and module start perf record: Fix module size on s390 perf tools: Fix include paths in ui directory perf tools: Fix a typo in a variable name in the Documentation Makefile perf cpumap: Fix writing to illegal memory in handling cpumap mask perf ftrace: Fix failure to set cpumask when only one cpu is present perf db-export: Fix thread__exec_comm() perf annotate: Fix printing of unaugmented disassembled instructions from BPF perf bench numa: Fix cpu0 binding 10 August 2019, 23:19:02 UTC
dcbb4a1 Linus Torvalds 10 August 2019, 22:48:02 UTC Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Three fixlets for the scheduler: - Avoid double bandwidth accounting in the push & pull code - Use a sane FIFO priority for the Pressure Stall Information (PSI) thread. - Avoid permission checks when setting the scheduler params for the PSI thread" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/psi: Do not require setsched permission from the trigger creator sched/psi: Reduce psimon FIFO priority sched/deadline: Fix double accounting of rq/running bw in push & pull 10 August 2019, 22:48:02 UTC
ed254bb Linus Torvalds 10 August 2019, 22:46:25 UTC Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A small fix for the affinity spreading code. It failed to handle situations where a single vector was requested either due to only one CPU being available or vector exhaustion causing only a single interrupt to be granted. The fix is to simply remove the requirement in the affinity spreading code for more than one interrupt being available" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/affinity: Create affinity mask for single vector 10 August 2019, 22:46:25 UTC
6054f4e Linus Torvalds 10 August 2019, 22:44:09 UTC Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool warning fix from Thomas Gleixner: "The recent objtool fixes/enhancements unearthed a unbalanced CLAC in the i915 driver. Chris asked me to pick the fix up and route it through" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: drm/i915: Remove redundant user_access_end() from __copy_from_user() error path 10 August 2019, 22:44:09 UTC
829890d Linus Torvalds 10 August 2019, 22:41:15 UTC Merge tag 'gfs2-v5.3-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fix from Andreas Gruenbacher: "Fix incorrect lseek / fiemap results" * tag 'gfs2-v5.3-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: gfs2_walk_metadata fix 10 August 2019, 22:41:15 UTC
bfd7714 Joe Perches 05 August 2019, 22:11:15 UTC Makefile: Convert -Wimplicit-fallthrough=3 to just -Wimplicit-fallthrough for clang A compilation -Wimplicit-fallthrough warning was enabled by commit a035d552a93b ("Makefile: Globally enable fall-through warning") Even though clang 10.0.0 does not currently support this warning without a patch, clang currently does not support a value for this option. Link: https://bugs.llvm.org/show_bug.cgi?id=39382 The gcc default for this warning is 3 so removing the =3 has no effect for gcc and enables the warning for patched versions of clang. Also remove the =3 from an existing use in a parisc Makefile: arch/parisc/math-emu/Makefile Signed-off-by: Joe Perches <joe@perches.com> Reviewed-and-tested-by: Nathan Chancellor <natechancellor@gmail.com> Cc: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 10 August 2019, 19:45:37 UTC
5aa9100 Linus Torvalds 10 August 2019, 19:24:20 UTC Merge tag 'char-misc-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes Greg KH: "Here are some small char/misc driver fixes for 5.3-rc4. Two of these are for the habanalabs driver for issues found when running on a big-endian system (are they still alive?) The others are tiny fixes reported by people, and a MAINTAINERS update about the location of the fpga development tree. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: coresight: Fix DEBUG_LOCKS_WARN_ON for uninitialized attribute MAINTAINERS: Move linux-fpga tree to new location nvmem: Use the same permissions for eeprom as for nvmem habanalabs: fix host memory polling in BE architecture habanalabs: fix F/W download in BE architecture 10 August 2019, 19:24:20 UTC
36e630e Linus Torvalds 10 August 2019, 19:20:02 UTC Merge tag 'driver-core-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are two small fixes for some driver core issues that have been reported. There is also a kernfs "fix" here, which was then reverted because it was found to cause problems in linux-next. The driver core fixes both resolve reported issues, one with gpioint stuff that showed up in 5.3-rc1, and the other finally (and hopefully) resolves a very long standing race when removing glue directories. It's nice to get that issue finally resolved and the developers involved should be applauded for the persistence it took to get this patch finally accepted. All of these have been in linux-next for a while with no reported issues. Well, the one reported issue, hence the revert :)" * tag 'driver-core-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Revert "kernfs: fix memleak in kernel_ops_readdir()" kernfs: fix memleak in kernel_ops_readdir() driver core: Fix use-after-free and double free on glue directory driver core: platform: return -ENXIO for missing GpioInt 10 August 2019, 19:20:02 UTC
c13f867 Linus Torvalds 10 August 2019, 19:17:12 UTC Merge tag 'tty-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty fix from Greg KH: "Here is a single tty kgdb fix for 5.3-rc4. It fixes an annoying log message that has caused kdb to become useless. It's another fallout from commit ddde3c18b700 ("vt: More locking checks") which tries to enforce locking checks more strictly in the tty layer, unfortunatly when kdb is stopped, there's no need for locks :) This patch has been linux-next for a while with no reported issues" * tag 'tty-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: kgdboc: disable the console lock when in kgdb 10 August 2019, 19:17:12 UTC
15fa98e Linus Torvalds 10 August 2019, 19:13:39 UTC Merge tag 'staging-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver fixes from Greg KH: "Here are some small staging and IIO driver fixes for 5.3-rc4. Nothing major, just resolutions for a number of small reported issues, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'staging-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: adc: gyroadc: fix uninitialized return code docs: generic-counter.rst: fix broken references for ABI file staging: android: ion: Bail out upon SIGKILL when allocating memory. Staging: fbtft: Fix GPIO handling staging: unisys: visornic: Update the description of 'poll_for_irq()' staging: wilc1000: flush the workqueue before deinit the host staging: gasket: apex: fix copy-paste typo Staging: fbtft: Fix reset assertion when using gpio descriptor Staging: fbtft: Fix probing of gpio descriptor iio: imu: mpu6050: add missing available scan masks iio: cros_ec_accel_legacy: Fix incorrect channel setting IIO: Ingenic JZ47xx: Set clock divider on probe iio: adc: max9611: Fix misuse of GENMASK macro 10 August 2019, 19:13:39 UTC
1041f50 Linus Torvalds 10 August 2019, 18:59:57 UTC Merge tag 'usb-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.3-rc4. The "biggest" one here is moving code from one file to another in order to fix a long-standing race condition with the creation of sysfs files for USB devices. Turns out that there are now userspace tools out there that are hitting this long-known bug, so it's time to fix them. Thankfully the tool-maker in this case fixed the issue :) The other patches in here are all fixes for reported issues. Now that syzbot knows how to fuzz USB drivers better, and is starting to now fuzz the userspace facing side of them at the same time, there will be more and more small fixes like these coming, which is a good thing. All of these have been in linux-next with no reported issues" * tag 'usb-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: setup authorized_default attributes using usb_bus_notify usb: iowarrior: fix deadlock on disconnect Revert "USB: rio500: simplify locking" usb: usbfs: fix double-free of usb memory upon submiturb error usb: yurex: Fix use-after-free in yurex_delete usb: typec: tcpm: Ignore unsupported/unknown alternate mode requests xhci: Fix NULL pointer dereference at endpoint zero reset. usb: host: xhci-rcar: Fix timeout in xhci_suspend() usb: typec: ucsi: ccg: Fix uninitilized symbol error usb: typec: tcpm: remove tcpm dir if no children usb: typec: tcpm: free log buf memory when remove debug file usb: typec: tcpm: Add NULL check before dereferencing config 10 August 2019, 18:59:57 UTC
97946f5 Linus Torvalds 10 August 2019, 17:21:25 UTC Merge tag 'pinctrl-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Delay acquisition of regmaps in the Aspeed G5 driver. - Make a symbol static to reduce compiler noise. * tag 'pinctrl-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: aspeed: Make aspeed_pinmux_ips static pinctrl: aspeed-g5: Delay acquisition of regmaps 10 August 2019, 17:21:25 UTC
23df57a Linus Torvalds 10 August 2019, 17:17:19 UTC Merge tag 'powerpc-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "Just one fix, a revert of a commit that was meant to be a minor improvement to some inline asm, but ended up having no real benefit with GCC and broke booting 32-bit machines when using Clang. Thanks to: Arnd Bergmann, Christophe Leroy, Nathan Chancellor, Nick Desaulniers, Segher Boessenkool" * tag 'powerpc-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: Revert "powerpc: slightly improve cache helpers" 10 August 2019, 17:17:19 UTC
bf1881c Linus Torvalds 10 August 2019, 17:10:33 UTC Merge tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fall-through fixes from Gustavo A. R. Silva: "Mark more switch cases where we are expecting to fall through, fixing fall-through warnings in arm, sparc64, mips, i386 and s390" * tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: ARM: ep93xx: Mark expected switch fall-through scsi: fas216: Mark expected switch fall-throughs pcmcia: db1xxx_ss: Mark expected switch fall-throughs video: fbdev: omapfb_main: Mark expected switch fall-throughs watchdog: riowd: Mark expected switch fall-through s390/net: Mark expected switch fall-throughs crypto: ux500/crypt: Mark expected switch fall-throughs watchdog: wdt977: Mark expected switch fall-through watchdog: scx200_wdt: Mark expected switch fall-through watchdog: Mark expected switch fall-throughs ARM: signal: Mark expected switch fall-through mfd: omap-usb-host: Mark expected switch fall-throughs mfd: db8500-prcmu: Mark expected switch fall-throughs ARM: OMAP: dma: Mark expected switch fall-throughs ARM: alignment: Mark expected switch fall-throughs ARM: tegra: Mark expected switch fall-through ARM/hw_breakpoint: Mark expected switch fall-throughs 10 August 2019, 17:10:33 UTC
451577f Linus Torvalds 10 August 2019, 03:31:04 UTC Merge tag 'kbuild-fixes-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - revive single target %.ko - do not create built-in.a where it is unneeded - do not create modules.order where it is unneeded - show a warning if subdir-y/m is used to visit a module Makefile * tag 'kbuild-fixes-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: show hint if subdir-y/m is used to visit module Makefile kbuild: generate modules.order only in directories visited by obj-y/m kbuild: fix false-positive need-builtin calculation kbuild: revive single target %.ko 10 August 2019, 03:31:04 UTC
1f7585f Gustavo A. R. Silva 08 August 2019, 02:34:48 UTC ARM: ep93xx: Mark expected switch fall-through Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: arm-ep93xx_defconfig arm): arch/arm/mach-ep93xx/crunch.c: In function 'crunch_do': arch/arm/mach-ep93xx/crunch.c:46:3: warning: this statement may fall through [-Wimplicit-fallthrough=] memset(crunch_state, 0, sizeof(*crunch_state)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-ep93xx/crunch.c:53:2: note: here case THREAD_NOTIFY_EXIT: ^~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:53:35 UTC
fccf01b Gustavo A. R. Silva 06 August 2019, 08:26:15 UTC scsi: fas216: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: rpc_defconfig arm): drivers/scsi/arm/fas216.c: In function ‘fas216_disconnect_intr’: drivers/scsi/arm/fas216.c:913:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) { ^ drivers/scsi/arm/fas216.c:919:2: note: here default: /* huh? */ ^~~~~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_kick’: drivers/scsi/arm/fas216.c:1959:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_allocate_tag(info, SCpnt); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1960:2: note: here case TYPE_OTHER: ^~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_busservice_intr’: drivers/scsi/arm/fas216.c:1413:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1414:2: note: here case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */ ^~~~ drivers/scsi/arm/fas216.c:1424:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1425:2: note: here case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */ ^~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_funcdone_intr’: drivers/scsi/arm/fas216.c:1573:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((stat & STAT_BUSMASK) == STAT_MESGIN) { ^ drivers/scsi/arm/fas216.c:1579:2: note: here default: ^~~~~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_handlesync’: drivers/scsi/arm/fas216.c:605:20: warning: this statement may fall through [-Wimplicit-fallthrough=] info->scsi.phase = PHASE_MSGOUT_EXPECT; ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:607:2: note: here case async: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:53:35 UTC
5f163f3 Gustavo A. R. Silva 05 August 2019, 19:47:35 UTC pcmcia: db1xxx_ss: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: db1xxx_defconfig mips): drivers/pcmcia/db1xxx_ss.c:257:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/pcmcia/db1xxx_ss.c:269:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:53:04 UTC
70a2783 Gustavo A. R. Silva 02 August 2019, 19:10:29 UTC video: fbdev: omapfb_main: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: omap1_defconfig arm): drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/watchdog/ar7_wdt.c:237:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:449:23: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1549:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1547:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1545:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1543:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1540:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1538:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1535:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:51:52 UTC
40ad2de Gustavo A. R. Silva 30 July 2019, 01:45:29 UTC watchdog: riowd: Mark expected switch fall-through Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: sparc64): drivers/watchdog/riowd.c: In function ‘riowd_ioctl’: drivers/watchdog/riowd.c:136:3: warning: this statement may fall through [-Wimplicit-fallthrough=] riowd_writereg(p, riowd_timeout, WDTO_INDEX); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/watchdog/riowd.c:139:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:51:01 UTC
7b73315 Gustavo A. R. Silva 30 July 2019, 00:13:54 UTC s390/net: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: s390): drivers/s390/net/ctcm_fsms.c: In function ‘ctcmpc_chx_attnbusy’: drivers/s390/net/ctcm_fsms.c:1703:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (grp->changed_side == 1) { ^ drivers/s390/net/ctcm_fsms.c:1707:2: note: here case MPCG_STATE_XID0IOWAIX: ^~~~ drivers/s390/net/ctcm_mpc.c: In function ‘ctc_mpc_alloc_channel’: drivers/s390/net/ctcm_mpc.c:358:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (callback) ^ drivers/s390/net/ctcm_mpc.c:360:2: note: here case MPCG_STATE_XID0IOWAIT: ^~~~ drivers/s390/net/ctcm_mpc.c: In function ‘mpc_action_timeout’: drivers/s390/net/ctcm_mpc.c:1469:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((fsm_getstate(rch->fsm) == CH_XID0_PENDING) && ^ drivers/s390/net/ctcm_mpc.c:1472:2: note: here default: ^~~~~~~ drivers/s390/net/ctcm_mpc.c: In function ‘mpc_send_qllc_discontact’: drivers/s390/net/ctcm_mpc.c:2087:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (grp->estconnfunc) { ^ drivers/s390/net/ctcm_mpc.c:2092:2: note: here case MPCG_STATE_FLOWC: ^~~~ drivers/s390/net/qeth_l2_main.c: In function ‘qeth_l2_process_inbound_buffer’: drivers/s390/net/qeth_l2_main.c:328:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (IS_OSN(card)) { ^ drivers/s390/net/qeth_l2_main.c:337:3: note: here default: ^~~~~~~ Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:50:01 UTC
3d86c7a Gustavo A. R. Silva 29 July 2019, 22:35:45 UTC crypto: ux500/crypt: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_save_device_context’: drivers/crypto/ux500/cryp/cryp.c:316:16: warning: this statement may fall through [-Wimplicit-fallthrough=] ctx->key_4_r = readl_relaxed(&src_reg->key_4_r); drivers/crypto/ux500/cryp/cryp.c:318:2: note: here case CRYP_KEY_SIZE_192: ^~~~ drivers/crypto/ux500/cryp/cryp.c:320:16: warning: this statement may fall through [-Wimplicit-fallthrough=] ctx->key_3_r = readl_relaxed(&src_reg->key_3_r); drivers/crypto/ux500/cryp/cryp.c:322:2: note: here case CRYP_KEY_SIZE_128: ^~~~ drivers/crypto/ux500/cryp/cryp.c:324:16: warning: this statement may fall through [-Wimplicit-fallthrough=] ctx->key_2_r = readl_relaxed(&src_reg->key_2_r); drivers/crypto/ux500/cryp/cryp.c:326:2: note: here default: ^~~~~~~ In file included from ./include/linux/io.h:13:0, from drivers/crypto/ux500/cryp/cryp_p.h:14, from drivers/crypto/ux500/cryp/cryp.c:15: drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_restore_device_context’: ./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __raw_writel __raw_writel ^ ./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’ #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) ^~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:363:3: note: in expansion of macro ‘writel_relaxed’ writel_relaxed(ctx->key_4_r, &reg->key_4_r); ^~~~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:365:2: note: here case CRYP_KEY_SIZE_192: ^~~~ In file included from ./include/linux/io.h:13:0, from drivers/crypto/ux500/cryp/cryp_p.h:14, from drivers/crypto/ux500/cryp/cryp.c:15: ./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __raw_writel __raw_writel ^ ./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’ #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) ^~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:367:3: note: in expansion of macro ‘writel_relaxed’ writel_relaxed(ctx->key_3_r, &reg->key_3_r); ^~~~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:369:2: note: here case CRYP_KEY_SIZE_128: ^~~~ In file included from ./include/linux/io.h:13:0, from drivers/crypto/ux500/cryp/cryp_p.h:14, from drivers/crypto/ux500/cryp/cryp.c:15: ./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __raw_writel __raw_writel ^ ./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’ #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) ^~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:371:3: note: in expansion of macro ‘writel_relaxed’ writel_relaxed(ctx->key_2_r, &reg->key_2_r); ^~~~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:373:2: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:49:04 UTC
d51c616 Gustavo A. R. Silva 29 July 2019, 22:30:57 UTC watchdog: wdt977: Mark expected switch fall-through Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/watchdog/wdt977.c: In function ‘wdt977_ioctl’: LD [M] drivers/media/platform/vicodec/vicodec.o drivers/watchdog/wdt977.c:400:3: warning: this statement may fall through [-Wimplicit-fallthrough=] wdt977_keepalive(); ^~~~~~~~~~~~~~~~~~ drivers/watchdog/wdt977.c:403:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:48:41 UTC
24f2161 Gustavo A. R. Silva 29 July 2019, 20:03:49 UTC watchdog: scx200_wdt: Mark expected switch fall-through Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: i386): drivers/watchdog/scx200_wdt.c: In function ‘scx200_wdt_ioctl’: drivers/watchdog/scx200_wdt.c:188:3: warning: this statement may fall through [-Wimplicit-fallthrough=] scx200_wdt_ping(); ^~~~~~~~~~~~~~~~~ drivers/watchdog/scx200_wdt.c:189:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:48:13 UTC
d259f94 Gustavo A. R. Silva 29 July 2019, 15:08:05 UTC watchdog: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/watchdog/ar7_wdt.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 237:3 drivers/watchdog/pcwd.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 653:3 drivers/watchdog/sb_wdog.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 204:3 drivers/watchdog/wdt.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 391:3 Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:47:24 UTC
e9d81fc Gustavo A. R. Silva 29 July 2019, 00:11:11 UTC ARM: signal: Mark expected switch fall-through Mark switch cases where we are expecting to fall through. This patch fixes the following warning: arch/arm/kernel/signal.c: In function 'do_signal': arch/arm/kernel/signal.c:598:12: warning: this statement may fall through [-Wimplicit-fallthrough=] restart -= 2; ~~~~~~~~^~~~ arch/arm/kernel/signal.c:599:3: note: here case -ERESTARTNOHAND: ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:47:15 UTC
9039782 Gustavo A. R. Silva 28 July 2019, 23:57:05 UTC mfd: omap-usb-host: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_resume': drivers/mfd/omap-usb-host.c:303:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (!IS_ERR(omap->hsic480m_clk[i])) { ^ drivers/mfd/omap-usb-host.c:313:3: note: here case OMAP_EHCI_PORT_MODE_TLL: ^~~~ drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_suspend': drivers/mfd/omap-usb-host.c:345:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (!IS_ERR(omap->hsic480m_clk[i])) ^ drivers/mfd/omap-usb-host.c:349:3: note: here case OMAP_EHCI_PORT_MODE_TLL: ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:46:52 UTC
795952d Gustavo A. R. Silva 28 July 2019, 23:53:15 UTC mfd: db8500-prcmu: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/mfd/db8500-prcmu.c: In function 'dsiclk_rate': drivers/mfd/db8500-prcmu.c:1592:7: warning: this statement may fall through [-Wimplicit-fallthrough=] div *= 2; ~~~~^~~~ drivers/mfd/db8500-prcmu.c:1593:2: note: here case PRCM_DSI_PLLOUT_SEL_PHI_2: ^~~~ drivers/mfd/db8500-prcmu.c:1594:7: warning: this statement may fall through [-Wimplicit-fallthrough=] div *= 2; ~~~~^~~~ drivers/mfd/db8500-prcmu.c:1595:2: note: here case PRCM_DSI_PLLOUT_SEL_PHI: ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:46:05 UTC
3da6bd9 Gustavo A. R. Silva 28 July 2019, 23:19:41 UTC ARM: OMAP: dma: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/arm/plat-omap/dma.c: In function 'omap_set_dma_src_burst_mode': arch/arm/plat-omap/dma.c:384:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:393:2: note: here case OMAP_DMA_DATA_BURST_16: ^~~~ arch/arm/plat-omap/dma.c:394:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:402:2: note: here default: ^~~~~~~ arch/arm/plat-omap/dma.c: In function 'omap_set_dma_dest_burst_mode': arch/arm/plat-omap/dma.c:473:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:481:2: note: here default: ^~~~~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:45:41 UTC
e7c0c9f Gustavo A. R. Silva 28 July 2019, 23:17:18 UTC ARM: alignment: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/arm/mm/alignment.c: In function 'thumb2arm': arch/arm/mm/alignment.c:688:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((tinstr & (3 << 9)) == 0x0400) { ^ arch/arm/mm/alignment.c:700:2: note: here default: ^~~~~~~ arch/arm/mm/alignment.c: In function 'do_alignment_t32_to_handler': arch/arm/mm/alignment.c:753:15: warning: this statement may fall through [-Wimplicit-fallthrough=] poffset->un = (tinst2 & 0xff) << 2; ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ arch/arm/mm/alignment.c:754:2: note: here case 0xe940: ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:45:31 UTC
9b76ad3 Gustavo A. R. Silva 28 July 2019, 23:10:21 UTC ARM: tegra: Mark expected switch fall-through Mark switch cases where we are expecting to fall through. This patch fixes the following warning: arch/arm/mach-tegra/reset.c: In function 'tegra_cpu_reset_handler_enable': arch/arm/mach-tegra/reset.c:72:3: warning: this statement may fall through [-Wimplicit-fallthrough=] tegra_cpu_reset_handler_set(reset_address); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-tegra/reset.c:74:2: note: here case 0: ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:45:22 UTC
2d0e988 Gustavo A. R. Silva 28 July 2019, 23:02:41 UTC ARM/hw_breakpoint: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_arch_parse': arch/arm/kernel/hw_breakpoint.c:609:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2) ^ arch/arm/kernel/hw_breakpoint.c:611:2: note: here case 3: ^~~~ arch/arm/kernel/hw_breakpoint.c:613:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1) ^ arch/arm/kernel/hw_breakpoint.c:615:2: note: here default: ^~~~~~~ arch/arm/kernel/hw_breakpoint.c: In function 'arch_build_bp_info': arch/arm/kernel/hw_breakpoint.c:544:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((hw->ctrl.type != ARM_BREAKPOINT_EXECUTE) ^ arch/arm/kernel/hw_breakpoint.c:547:2: note: here default: ^~~~~~~ In file included from include/linux/kernel.h:11, from include/linux/list.h:9, from include/linux/preempt.h:11, from include/linux/hardirq.h:5, from arch/arm/kernel/hw_breakpoint.c:16: arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_pending': include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=] # define unlikely(x) __builtin_expect(!!(x), 0) ^~~~~~~~~~~~~~~~~~~~~~~~~~ include/asm-generic/bug.h:136:2: note: in expansion of macro 'unlikely' unlikely(__ret_warn_on); \ ^~~~~~~~ arch/arm/kernel/hw_breakpoint.c:863:3: note: in expansion of macro 'WARN' WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n"); ^~~~ arch/arm/kernel/hw_breakpoint.c:864:2: note: here case ARM_ENTRY_SYNC_WATCHPOINT: ^~~~ arch/arm/kernel/hw_breakpoint.c: In function 'core_has_os_save_restore': arch/arm/kernel/hw_breakpoint.c:910:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (oslsr & ARM_OSLSR_OSLM0) ^ arch/arm/kernel/hw_breakpoint.c:912:2: note: here default: ^~~~~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> 10 August 2019, 00:45:01 UTC
7f20fd2 Linus Torvalds 09 August 2019, 22:46:29 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "Bugfixes (arm and x86) and cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: selftests: kvm: Adding config fragments KVM: selftests: Update gitignore file for latest changes kvm: remove unnecessary PageReserved check KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable KVM: arm: Don't write junk to CP15 registers on reset KVM: arm64: Don't write junk to sysregs on reset KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block x86: kvm: remove useless calls to kvm_para_available KVM: no need to check return value of debugfs_create functions KVM: remove kvm_arch_has_vcpu_debugfs() KVM: Fix leak vCPU's VMCS value into other pCPU KVM: Check preempted_in_kernel for involuntary preemption KVM: LAPIC: Don't need to wakeup vCPU twice afer timer fire arm64: KVM: hyp: debug-sr: Mark expected switch fall-through KVM: arm64: Update kvm_arm_exception_class and esr_class_str for new EC KVM: arm: vgic-v3: Mark expected switch fall-through arm64: KVM: regmap: Fix unexpected switch fall-through KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter index 09 August 2019, 22:46:29 UTC
15abf14 Linus Torvalds 09 August 2019, 22:31:19 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - newer systems with Elan touchpads will be switched over to SMBus - HP Spectre X360 will be using SMbus/RMI4 - checks for invalid USB descriptors in kbtab and iforce - build fixes for applespi driver (misconfigs) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: iforce - add sanity checks Input: applespi - use struct_size() helper Input: kbtab - sanity check for endpoint type Input: usbtouchscreen - initialize PM mutex before using it Input: applespi - add dependency on LEDS_CLASS Input: synaptics - enable RMI mode for HP Spectre X360 Input: elantech - annotate fall-through case in elantech_use_host_notify() Input: elantech - enable SMBus on new (2018+) systems Input: applespi - fix trivial typo in struct description Input: applespi - select CRC16 module Input: applespi - fix warnings detected by sparse 09 August 2019, 22:31:19 UTC
0628237 Dan Williams 08 August 2019, 21:43:49 UTC mm/memremap: Fix reuse of pgmap instances with internal references Currently, attempts to shutdown and re-enable a device-dax instance trigger: Missing reference count teardown definition WARNING: CPU: 37 PID: 1608 at mm/memremap.c:211 devm_memremap_pages+0x234/0x850 [..] RIP: 0010:devm_memremap_pages+0x234/0x850 [..] Call Trace: dev_dax_probe+0x66/0x190 [device_dax] really_probe+0xef/0x390 driver_probe_device+0xb4/0x100 device_driver_attach+0x4f/0x60 Given that the setup path initializes pgmap->ref, arrange for it to be also torn down so devm_memremap_pages() is ready to be called again and not be mistaken for the 3rd-party per-cpu-ref case. Fixes: 24917f6b1041 ("memremap: provide an optional internal refcount in struct dev_pagemap") Reported-by: Fan Du <fan.du@intel.com> Tested-by: Vishal Verma <vishal.l.verma@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/156530042781.2068700.8733813683117819799.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> 09 August 2019, 21:16:15 UTC
e6a9522 Josh Poimboeuf 25 July 2019, 20:29:57 UTC drm/i915: Remove redundant user_access_end() from __copy_from_user() error path Objtool reports: drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0x36: redundant UACCESS disable __copy_from_user() already does both STAC and CLAC, so the user_access_end() in its error path adds an extra unnecessary CLAC. Fixes: 0b2c8f8b6b0c ("i915: fix missing user_access_end() in page fault exception case") Reported-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://github.com/ClangBuiltLinux/linux/issues/617 Link: https://lkml.kernel.org/r/51a4155c5bc2ca847a9cbe85c1c11918bb193141.1564086017.git.jpoimboe@redhat.com 09 August 2019, 21:13:25 UTC
c07d8d4 Masahiro Yamada 08 August 2019, 11:21:11 UTC kbuild: show hint if subdir-y/m is used to visit module Makefile Since commit ff9b45c55b26 ("kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod"), a module is no longer built in the following pattern: [Makefile] subdir-y := some-module [some-module/Makefile] obj-m := some-module.o You cannot write Makefile this way in upstream because modules.order is not correctly generated. subdir-y is used to descend to a sub-directory that builds tools, device trees, etc. For external modules, the modules order does not matter. So, the Makefile above was known to work. I believe the Makefile should be re-written as follows: [Makefile] obj-m := some-module/ [some-module/Makefile] obj-m := some-module.o However, people will have no idea if their Makefile suddenly stops working. In fact, I received questions from multiple people. Show a warning for a while if obj-m is specified in a Makefile visited by subdir-y or subdir-m. I touched the %/ rule to avoid false-positive warnings for the single target. Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Tom Stonecypher <thomas.edwardx.stonecypher@intel.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> 09 August 2019, 16:45:31 UTC
4f2c8f3 Masahiro Yamada 06 August 2019, 10:03:22 UTC kbuild: generate modules.order only in directories visited by obj-y/m The modules.order files in directories visited by the chain of obj-y or obj-m are merged to the upper-level ones, and become parts of the top-level modules.order. On the other hand, there is no need to generate modules.order in directories visited by subdir-y or subdir-m since they would become orphan anyway. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 09 August 2019, 16:45:31 UTC
d9f78ed Masahiro Yamada 06 August 2019, 10:03:21 UTC kbuild: fix false-positive need-builtin calculation The current implementation of need-builtin is false-positive, for example, in the following Makefile: obj-m := foo/ obj-y := foo/bar/ ..., where foo/built-in.a is not required. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 09 August 2019, 16:45:31 UTC
47801c9 Masahiro Yamada 02 August 2019, 10:23:58 UTC kbuild: revive single target %.ko I removed the single target %.ko in commit ff9b45c55b26 ("kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod") because the modpost stage does not work reliably. For instance, the module dependency, modversion, etc. do not work if we lack symbol information from the other modules. Yet, some people still want to build only one module in their interest, and it may be still useful if it is used within those limitations. Fixes: ff9b45c55b26 ("kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod") Reported-by: Don Brace <don.brace@microsemi.com> Reported-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 09 August 2019, 16:40:25 UTC
2226fb5 Linus Torvalds 09 August 2019, 16:35:23 UTC Merge tag 'drm-fixes-2019-08-09' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Usual fixes roundup. Nothing too crazy or serious, one non-released ioctl is removed in the amdkfd driver. core: - mode parser strncpy fix i915: - GLK DSI escape clock setting - HDCP memleak fix tegra: - one gpiod/of regression fix amdgpu: - fix VCN to handle the latest navi10 firmware - fix for fan control on navi10 - properly handle SMU metrics table on navi10 - fix a resume regression on Stoney - kfd revert a GWS ioctl vmwgfx: - memory leak fix rockchip: - suspend fix" * tag 'drm-fixes-2019-08-09' of git://anongit.freedesktop.org/drm/drm: drm/vmwgfx: fix memory leak when too many retries have occurred Revert "drm/amdkfd: New IOCTL to allocate queue GWS" Revert "drm/amdgpu: fix transform feedback GDS hang on gfx10 (v2)" drm/amdgpu: pin the csb buffer on hw init for gfx v8 drm/rockchip: Suspend DP late drm/i915: Fix wrong escape clock divisor init for GLK drm/i915: fix possible memory leak in intel_hdcp_auth_downstream() drm/modes: Fix unterminated strncpy drm/amd/powerplay: correct navi10 vcn powergate drm/amd/powerplay: honor hw limit on fetching metrics data for navi10 drm/amd/powerplay: Allow changing of fan_control in smu_v11_0 drm/amd/amdgpu/vcn_v2_0: Move VCN 2.0 specific dec ring test to vcn_v2_0 drm/amd/amdgpu/vcn_v2_0: Mark RB commands as KMD commands drm/tegra: Fix gpiod_get_from_of_node() regression 09 August 2019, 16:35:23 UTC
15a555a Linus Torvalds 09 August 2019, 16:31:40 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Fix bad_pte warning caused by pte_mkdevmap() not setting PTE_SPECIAL" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: add missing PTE_SPECIAL in pte_mkdevmap on arm64 09 August 2019, 16:31:40 UTC
cb7ef4b Linus Torvalds 09 August 2019, 16:30:00 UTC Merge tag 's390-5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Map vdso also for statically linked binaries like all other architectures. - Fix no .bss usage compile-time check to account common objects with the help of binutils size tool. Top level Makefile change acked-by Masahiro. - A fix to make perf happy with _etext symbol type. - Fix dump_pagetables which is broken since p*d_offset implementation change to comply with mm/gup.c expectations. - Revert memory sharing for diag calls in protected virtualization, since this is not required after all. - Couple of other minor code cleanups. * tag 's390-5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/vdso: map vdso also for statically linked binaries s390/build: use size command to perform empty .bss check kbuild: add OBJSIZE variable for the size tool s390: put _stext and _etext into .text section s390/head64: cleanup unused labels s390/unwind: remove stack recursion warning s390/setup: adjust start_code of init_mm to _text s390/mm: fix dump_pagetables top level page table walking s390/protvirt: avoid memory sharing for diag 308 set/store 09 August 2019, 16:30:00 UTC
50e73a4 Linus Torvalds 09 August 2019, 16:28:18 UTC Merge tag 'for-linus-20190809' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - Revert of a bcache patch that caused an oops for some (Coly) - ata rb532 unused warning fix (Gustavo) - AoE kernel crash fix (He) - Error handling fixup for blkdev_get() (Jan) - libata read/write translation and SFF PIO fix (me) - Use after free and error handling fix for O_DIRECT fragments. There's still a nowait + sync oddity in there, we'll nail that start next week. If all else fails, I'll queue a revert of the NOWAIT change. (me) - Loop GFP_KERNEL -> GFP_NOIO deadlock fix (Mikulas) - Two BFQ regression fixes that caused crashes (Paolo) * tag 'for-linus-20190809' of git://git.kernel.dk/linux-block: bcache: Revert "bcache: use sysfs_match_string() instead of __sysfs_match_string()" loop: set PF_MEMALLOC_NOIO for the worker thread bdev: Fixup error handling in blkdev_get() block, bfq: handle NULL return value by bfq_init_rq() block, bfq: move update of waker and woken list to queue freeing block, bfq: reset last_completed_rq_bfqq if the pointed queue is freed block: aoe: Fix kernel crash due to atomic sleep when exiting libata: add SG safety checks in SFF pio transfers libata: have ata_scsi_rw_xlat() fail invalid passthrough requests block: fix O_DIRECT error handling for bio fragments ata: rb532_cf: Fix unused variable warning in rb532_pata_driver_probe 09 August 2019, 16:28:18 UTC
461d281 Linus Torvalds 09 August 2019, 16:26:47 UTC Merge tag 'mmc-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - cavium: Fix DMA support - sdhci-sprd: Fix soft reset when runtime resuming" * tag 'mmc-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: cavium: Add the missing dma unmap when the dma has finished. mmc: cavium: Set the correct dma max segment size for mmc_host mmc: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming 09 August 2019, 16:26:47 UTC
ec4c99a Linus Torvalds 09 August 2019, 16:24:49 UTC Merge tag 'fbdev-v5.3-rc4' of git://github.com/bzolnier/linux Pull fbdev fix from Bartlomiej Zolnierkiewicz: "fbdev patches will now go to upstream through drm-misc tree for improved maintainership and better integration testing so update MAINTAINERS file accordingly" * tag 'fbdev-v5.3-rc4' of git://github.com/bzolnier/linux: MAINTAINERS: handle fbdev changes through drm-misc tree 09 August 2019, 16:24:49 UTC
c808f2a Linus Torvalds 09 August 2019, 16:23:23 UTC Merge tag 'pwm/for-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fix from Thierry Reding: "A single fix for a backlight brightness regression introduced in this merge window" * tag 'pwm/for-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Fallback to the static lookup-list when acpi_pwm_get fails 09 August 2019, 16:23:23 UTC
cb42f06 Linus Torvalds 09 August 2019, 16:21:27 UTC Merge tag 'sound-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Lots of small fixes at this time since we've received the ASoC fix batch now. - Some coverage in ASoC core mostly for minor issues like NULL checks for DPCM and proper error handling in DAI instantiation - A collection of small device-specific changes in various ASoC codec and platform drivers - OF-tree refcount fixes in a few ASoC drivers - Fixes of memory leaks in the error paths of various ASoC / ALSA drivers - A workaround for a long-standing issue on AMD HD-audio device - Updates of MAINTAINERS, mail addresses, file permission fixups" * tag 'sound-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (38 commits) ALSA: firewire: fix a memory leak bug sound: fix a memory leak bug ALSA: hda - Workaround for crackled sound on AMD controller (1022:1457) ALSA: hiface: fix multiple memory leak bugs ALSA: hda - Don't override global PCM hw info flag ALSA: usb-audio: fix a memory leak bug ASoC: max98373: Remove executable bits ASoC: amd: acp3x: use dma address for acp3x dma driver ASoC: amd: acp3x: use dma_ops of parent device for acp3x dma driver ASoC: max98373: add 88200 and 96000 sampling rate support ASoC: sun4i-i2s: Incorrect SR and WSS computation MAINTAINERS: Update Intel ASoC drivers maintainers ASoC: ti: davinci-mcasp: Correct slot_width posed constraint ASoC: rockchip: Fix mono capture ASoC: Intel: Fix some acpi vs apci typo in somme comments ASoC: ti: davinci-mcasp: Fix clk PDIR handling for i2s master mode ASoC: Fail card instantiation if DAI format setup fails ASoC: SOF: Intel: hda: remove misleading error trace from IRQ thread ASoC: qcom: apq8016_sbc: Fix oops with multiple DAI links ASoC: dapm: fix a memory leak bug ... 09 August 2019, 16:21:27 UTC
6c02b63 Linus Torvalds 09 August 2019, 16:19:53 UTC Merge tag 'media/v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: "A fix at the vivid CEC support" * tag 'media/v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: vivid: fix missing cec adapter name 09 August 2019, 16:19:53 UTC
0acf567 Linus Torvalds 09 August 2019, 16:18:36 UTC Merge tag 'pm-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Revert a recent PCI power management change that caused problems to occur on multiple systems (Mika Westerberg)" * tag 'pm-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "PCI: Add missing link delays required by the PCIe spec" 09 August 2019, 16:18:36 UTC
e577dc1 Linus Torvalds 09 August 2019, 16:17:05 UTC Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix a number of bugs in the ccp driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ccp - Ignore tag length when decrypting GCM ciphertext crypto: ccp - Add support for valid authsize values less than 16 crypto: ccp - Fix oops by properly managing allocated structures 09 August 2019, 16:17:05 UTC
a27a0c9 Andreas Gruenbacher 05 August 2019, 11:22:03 UTC gfs2: gfs2_walk_metadata fix It turns out that the current version of gfs2_metadata_walker suffers from multiple problems that can cause gfs2_hole_size to report an incorrect size. This will confuse fiemap as well as lseek with the SEEK_DATA flag. Fix that by changing gfs2_hole_walker to compute the metapath to the first data block after the hole (if any), and compute the hole size based on that. Fixes xfstest generic/490. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Bob Peterson <rpeterso@redhat.com> Cc: stable@vger.kernel.org # v4.18+ 09 August 2019, 15:56:12 UTC
a738b5e Paolo Bonzini 09 August 2019, 14:53:50 UTC Merge tag 'kvmarm-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.3, take #2 - Fix our system register reset so that we stop writing non-sensical values to them, and track which registers get reset instead. - Sync VMCR back from the GIC on WFI so that KVM has an exact vue of PMR. - Reevaluate state of HW-mapped, level triggered interrupts on enable. 09 August 2019, 14:53:50 UTC
0e1c438 Paolo Bonzini 09 August 2019, 14:53:39 UTC Merge tag 'kvmarm-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.3 - A bunch of switch/case fall-through annotation, fixing one actual bug - Fix PMU reset bug - Add missing exception class debug strings 09 August 2019, 14:53:39 UTC
c096397 Naresh Kamboju 07 August 2019, 13:58:14 UTC selftests: kvm: Adding config fragments selftests kvm test cases need pre-required kernel configs for the test to get pass. Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 09 August 2019, 14:52:38 UTC
e2c2653 Thomas Huth 31 July 2019, 14:28:51 UTC KVM: selftests: Update gitignore file for latest changes The kvm_create_max_vcpus test has been moved to the main directory, and sync_regs_test is now available on s390x, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 09 August 2019, 14:50:09 UTC
8f946da Paolo Bonzini 05 August 2019, 09:11:08 UTC kvm: remove unnecessary PageReserved check The same check is already done in kvm_is_reserved_pfn. Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 09 August 2019, 14:49:58 UTC
6a7553e Bartlomiej Zolnierkiewicz 09 August 2019, 13:46:40 UTC MAINTAINERS: handle fbdev changes through drm-misc tree fbdev patches will now go to upstream through drm-misc tree (IOW starting with v5.4 merge window fbdev changes will be included in DRM pull request) for improved maintainership and better integration testing. Update MAINTAINERS file accordingly. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> 09 August 2019, 13:46:40 UTC
20621fe Coly Li 09 August 2019, 06:14:05 UTC bcache: Revert "bcache: use sysfs_match_string() instead of __sysfs_match_string()" This reverts commit 89e0341af082dbc170019f908846f4a424efc86b. In drivers/md/bcache/sysfs.c:bch_snprint_string_list(), NULL pointer at the end of list is necessary. Remove the NULL from last element of each lists will cause the following panic, [ 4340.455652] bcache: register_cache() registered cache device nvme0n1 [ 4340.464603] bcache: register_bdev() registered backing device sdk [ 4421.587335] bcache: bch_cached_dev_run() cached dev sdk is running already [ 4421.587348] bcache: bch_cached_dev_attach() Caching sdk as bcache0 on set 354e1d46-d99f-4d8b-870b-078b80dc88a6 [ 5139.247950] general protection fault: 0000 [#1] SMP NOPTI [ 5139.247970] CPU: 9 PID: 5896 Comm: cat Not tainted 4.12.14-95.29-default #1 SLE12-SP4 [ 5139.247988] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 04/18/2019 [ 5139.248006] task: ffff888fb25c0b00 task.stack: ffff9bbacc704000 [ 5139.248021] RIP: 0010:string+0x21/0x70 [ 5139.248030] RSP: 0018:ffff9bbacc707bf0 EFLAGS: 00010286 [ 5139.248043] RAX: ffffffffa7e432e3 RBX: ffff8881c20da02a RCX: ffff0a00ffffff04 [ 5139.248058] RDX: 3f00656863616362 RSI: ffff8881c20db000 RDI: ffffffffffffffff [ 5139.248075] RBP: ffff8881c20db000 R08: 0000000000000000 R09: ffff8881c20da02a [ 5139.248090] R10: 0000000000000004 R11: 0000000000000000 R12: ffff9bbacc707c48 [ 5139.248104] R13: 0000000000000fd6 R14: ffffffffc0665855 R15: ffffffffc0665855 [ 5139.248119] FS: 00007faf253b8700(0000) GS:ffff88903f840000(0000) knlGS:0000000000000000 [ 5139.248137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5139.248149] CR2: 00007faf25395008 CR3: 0000000f72150006 CR4: 00000000007606e0 [ 5139.248164] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5139.248179] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5139.248193] PKRU: 55555554 [ 5139.248200] Call Trace: [ 5139.248210] vsnprintf+0x1fb/0x510 [ 5139.248221] snprintf+0x39/0x40 [ 5139.248238] bch_snprint_string_list.constprop.15+0x5b/0x90 [bcache] [ 5139.248256] __bch_cached_dev_show+0x44d/0x5f0 [bcache] [ 5139.248270] ? __alloc_pages_nodemask+0xb2/0x210 [ 5139.248284] bch_cached_dev_show+0x2c/0x50 [bcache] [ 5139.248297] sysfs_kf_seq_show+0xbb/0x190 [ 5139.248308] seq_read+0xfc/0x3c0 [ 5139.248317] __vfs_read+0x26/0x140 [ 5139.248327] vfs_read+0x87/0x130 [ 5139.248336] SyS_read+0x42/0x90 [ 5139.248346] do_syscall_64+0x74/0x160 [ 5139.248358] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 5139.248370] RIP: 0033:0x7faf24eea370 [ 5139.248379] RSP: 002b:00007fff82d03f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5139.248395] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007faf24eea370 [ 5139.248411] RDX: 0000000000020000 RSI: 00007faf25396000 RDI: 0000000000000003 [ 5139.248426] RBP: 00007faf25396000 R08: 00000000ffffffff R09: 0000000000000000 [ 5139.248441] R10: 000000007c9d4d41 R11: 0000000000000246 R12: 00007faf25396000 [ 5139.248456] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff [ 5139.248892] Code: ff ff ff 0f 1f 80 00 00 00 00 49 89 f9 48 89 cf 48 c7 c0 e3 32 e4 a7 48 c1 ff 30 48 81 fa ff 0f 00 00 48 0f 46 d0 48 85 ff 74 45 <44> 0f b6 02 48 8d 42 01 45 84 c0 74 38 48 01 fa 4c 89 cf eb 0e The simplest way to fix is to revert commit 89e0341af082 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()"). This bug was introduced in Linux v5.2, so this fix only applies to Linux v5.2 is enough for stable tree maintainer. Fixes: 89e0341af082 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()") Cc: stable@vger.kernel.org Cc: Alexandru Ardelean <alexandru.ardelean@analog.com> Reported-by: Peifeng Lin <pflin@suse.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> 09 August 2019, 13:37:33 UTC
404861e Heiko Carstens 07 August 2019, 12:31:59 UTC s390/vdso: map vdso also for statically linked binaries s390 does not map the vdso for statically linked binaries, assuming that this doesn't make sense. See commit fc5243d98ac2 ("[S390] arch_setup_additional_pages arguments"). However with glibc commit d665367f596d ("linux: Enable vDSO for static linking as default (BZ#19767)") and commit 5e855c895401 ("s390: Enable VDSO for static linking") the vdso is also used for statically linked binaries - if the kernel would make it available. Therefore map the vdso always, just like all other architectures. Reported-by: Stefan Liebler <stli@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> 09 August 2019, 09:03:28 UTC
16e604a Alexandru Elisei 07 August 2019, 09:53:20 UTC KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable A HW mapped level sensitive interrupt asserted by a device will not be put into the ap_list if it is disabled at the VGIC level. When it is enabled again, it will be inserted into the ap_list and written to a list register on guest entry regardless of the state of the device. We could argue that this can also happen on real hardware, when the command to enable the interrupt reached the GIC before the device had the chance to de-assert the interrupt signal; however, we emulate the distributor and redistributors in software and we can do better than that. Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> 09 August 2019, 07:07:26 UTC
c69509c Marc Zyngier 05 August 2019, 09:34:51 UTC KVM: arm: Don't write junk to CP15 registers on reset At the moment, the way we reset CP15 registers is mildly insane: We write junk to them, call the reset functions, and then check that we have something else in them. The "fun" thing is that this can happen while the guest is running (PSCI, for example). If anything in KVM has to evaluate the state of a CP15 register while junk is in there, bad thing may happen. Let's stop doing that. Instead, we track that we have called a reset function for that register, and assume that the reset function has done something. In the end, the very need of this reset check is pretty dubious, as it doesn't check everything (a lot of the CP15 reg leave outside of the cp15_regs[] array). It may well be axed in the near future. Signed-off-by: Marc Zyngier <maz@kernel.org> 09 August 2019, 07:07:24 UTC
03fdfb2 Marc Zyngier 05 August 2019, 09:34:51 UTC KVM: arm64: Don't write junk to sysregs on reset At the moment, the way we reset system registers is mildly insane: We write junk to them, call the reset functions, and then check that we have something else in them. The "fun" thing is that this can happen while the guest is running (PSCI, for example). If anything in KVM has to evaluate the state of a system register while junk is in there, bad thing may happen. Let's stop doing that. Instead, we track that we have called a reset function for that register, and assume that the reset function has done something. This requires fixing a couple of sysreg refinition in the trap table. In the end, the very need of this reset check is pretty dubious, as it doesn't check everything (a lot of the sysregs leave outside of the sys_regs[] array). It may well be axed in the near future. Tested-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> 09 August 2019, 07:07:07 UTC
a111ef6 Dave Airlie 09 August 2019, 05:46:09 UTC Merge tag 'drm-intel-fixes-2019-08-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.3-rc4: - Fix GLK DSI escape clock setting - Fix a memleak on HDCP revoked Ksv error path Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87pnlghz79.fsf@intel.com 09 August 2019, 05:46:10 UTC
359f1dc Dave Airlie 09 August 2019, 05:45:02 UTC Merge tag 'drm-misc-fixes-2019-08-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.3-rc4: - Suspend fix for rockchip - Fix unterminated strncpy cmdline mode parser Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ace294a6-6bb2-d9b1-695d-3260e1d60831@linux.intel.com 09 August 2019, 05:45:09 UTC
6ca847a Dave Airlie 09 August 2019, 05:40:06 UTC Merge branch 'vmwgfx-fixes-5.3' of git://people.freedesktop.org/~thomash/linux into drm-fixes One single memory leak fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom "VMware" <thomas@shipmail.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190808094615.31040-1-thomas@shipmail.org 09 August 2019, 05:41:33 UTC
b390e0b Paul Walmsley 08 August 2019, 22:36:44 UTC dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board The YAML binding document for SiFive boards has an incorrect compatible string for the HiFive Unleashed board. Change it to match the name of the board on the SiFive web site: https://www.sifive.com/boards/hifive-unleashed which also matches the contents of the board DT data file: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts#n13 Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Acked-by: Rob Herring <robh@kernel.org> 08 August 2019, 23:05:38 UTC
8e5e72e Paul Walmsley 08 August 2019, 21:46:58 UTC dt-bindings: riscv: remove obsolete cpus.txt Remove the now-obsolete riscv/cpus.txt DT binding document, since we are using YAML binding documentation instead. While doing so, transfer the explanatory text about 'harts' (with some edits) into the YAML file, at Rob's request. Link: https://lore.kernel.org/linux-riscv/CAL_JsqJs6MtvmuyAknsUxQymbmoV=G+=JfS1PQj9kNHV7fjC9g@mail.gmail.com/ Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Cc: Rob Herring <robh@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> 08 August 2019, 23:05:38 UTC
81a48ee Palmer Dabbelt 07 August 2019, 00:05:08 UTC RISC-V: Remove udivdi3 This should never have landed in the first place: it was added as part of 64-bit divide support for 32-bit systems, but the kernel doesn't allow this sort of division. I must have forgotten to remove it. This patch removes the support. Since this routine only worked on 64-bit platforms but was only built on 32-bit platforms, it's essentially just nonsense anyway. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Link: https://lore.kernel.org/linux-riscv/nycvar.YSQ.7.76.1908061413360.19480@knanqh.ubzr/T/#t Reported-by: Eric Lin <tesheng@andestech.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> 08 August 2019, 23:05:38 UTC
66cc016 Paul Walmsley 07 August 2019, 01:28:33 UTC riscv: delay: use do_div() instead of __udivdi3() In preparation for removing __udivdi3() from the RISC-V architecture-specific files, convert its one user to use do_div(). This avoids breaking the RV32 build after __udivdi3() is removed. This second version removes the assignment of the remainder to an unused temporary variable. Thanks to Nicolas Pitre <nico@fluxnic.net> for the suggestion. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Cc: Nicolas Pitre <nico@fluxnic.net> 08 August 2019, 23:05:38 UTC
94ed3fd Atish Patra 03 August 2019, 04:27:23 UTC dt-bindings: Update the riscv,isa string description Since the RISC-V specification states that ISA description strings are case-insensitive, there's no functional difference between mixed-case, upper-case, and lower-case ISA strings. Thus, to simplify parsing, specify that the letters present in "riscv,isa" must be all lowercase. Suggested-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> 08 August 2019, 23:05:38 UTC
b678c56 Linus Torvalds 08 August 2019, 21:47:19 UTC Merge tag 'nfs-for-5.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Pull NFS client fixes from Trond Myklebust: "Highlights include: Stable fixes: - NFSv4: Ensure we check the return value of update_open_stateid() so we correctly track active open state. - NFSv4: Fix for delegation state recovery to ensure we recover all open modes that are active. - NFSv4: Fix an Oops in nfs4_do_setattr Fixes: - NFS: Fix regression whereby fscache errors are appearing on 'nofsc' mounts - NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim() - NFSv4: Fix a credential refcount leak in nfs41_check_delegation_stateid - pNFS: Report errors from the call to nfs4_select_rw_stateid() - NFSv4: Various other delegation and open stateid recovery fixes - NFSv4: Fix state recovery behaviour when server connection times out" * tag 'nfs-for-5.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Ensure state recovery handles ETIMEDOUT correctly NFS: Fix regression whereby fscache errors are appearing on 'nofsc' mounts NFSv4: Fix an Oops in nfs4_do_setattr NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim() NFSv4: Check the return value of update_open_stateid() NFSv4.1: Only reap expired delegations NFSv4.1: Fix open stateid recovery NFSv4: Report the error from nfs4_select_rw_stateid() NFSv4: When recovering state fails with EAGAIN, retry the same recovery NFSv4: Print an error in the syslog when state is marked as irrecoverable NFSv4: Fix delegation state recovery NFSv4: Fix a credential refcount leak in nfs41_check_delegation_stateid 08 August 2019, 21:47:19 UTC
d7731b8 Thomas Gleixner 08 August 2019, 20:12:01 UTC Merge tag 'perf-urgent-for-mingo-5.3-20190808' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent perf/urgent fixes: db-export: Adrian Hunter: - Fix thread__exec_comm() picking of main thread COMM for pre-existing, synthesized from /proc data records. annotate: Arnaldo Carvalho de Melo: - Fix printing of unaugmented disassembled instructions from BPF, some lines were leaving leftovers from the previous screen, due to use of newlines by binutils's libopcode disassembler. perf ftrace: He Zhe: - Fix cpumask problems when only one CPU is present. PMU events: Jin Yao: - Add missing "cpu_clk_unhalted.core" event. perf bench: Jiri Olsa: - Fix cpu0 binding in the NUMA benchmarks. s390: Thomas Richter: - Fix module size calculations. build system: Masanari Iida: - Fix a typo in a variable name in the Documentation Makefile misc: Ian Rogers: - Fix include paths in ui directory. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 08 August 2019, 20:12:01 UTC
8e6e5be Jin Yao 29 July 2019, 07:27:55 UTC perf pmu-events: Fix missing "cpu_clk_unhalted.core" event The events defined in pmu-events JSON are parsed and added into perf tool. For fixed counters, we handle the encodings between JSON and perf by using a static array fixed[]. But the fixed[] has missed an important event "cpu_clk_unhalted.core". For example, on the Tremont platform, [root@localhost ~]# perf stat -e cpu_clk_unhalted.core -a event syntax error: 'cpu_clk_unhalted.core' \___ parser error With this patch, the event cpu_clk_unhalted.core can be parsed. [root@localhost perf]# ./perf stat -e cpu_clk_unhalted.core -a -vvv ------------------------------------------------------------ perf_event_attr: type 4 size 112 config 0x3c sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ ... Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190729072755.2166-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 08 August 2019, 18:41:37 UTC
b9c0a64 Thomas Richter 24 July 2019, 12:27:03 UTC perf annotate: Fix s390 gap between kernel end and module start During execution of command 'perf top' the error message: Not enough memory for annotating '__irf_end' symbol!) is emitted from this call sequence: __cmd_top perf_top__mmap_read perf_top__mmap_read_idx perf_event__process_sample hist_entry_iter__add hist_iter__top_callback perf_top__record_precise_ip hist_entry__inc_addr_samples symbol__inc_addr_samples symbol__get_annotation symbol__alloc_hist In this function the size of symbol __irf_end is calculated. The size of a symbol is the difference between its start and end address. When the symbol was read the first time, its start and end was set to: symbol__new: __irf_end 0xe954d0-0xe954d0 which is correct and maps with /proc/kallsyms: root@s8360046:~/linux-4.15.0/tools/perf# fgrep _irf_end /proc/kallsyms 0000000000e954d0 t __irf_end root@s8360046:~/linux-4.15.0/tools/perf# In function symbol__alloc_hist() the end of symbol __irf_end is symbol__alloc_hist sym:__irf_end start:0xe954d0 end:0x3ff80045a8 which is identical with the first module entry in /proc/kallsyms This results in a symbol size of __irf_req for histogram analyses of 70334140059072 bytes and a malloc() for this requested size fails. The root cause of this is function __dso__load_kallsyms() +-> symbols__fixup_end() Function symbols__fixup_end() enlarges the last symbol in the kallsyms map: # fgrep __irf_end /proc/kallsyms 0000000000e954d0 t __irf_end # to the start address of the first module: # cat /proc/kallsyms | sort | egrep ' [tT] ' .... 0000000000e952d0 T __security_initcall_end 0000000000e954d0 T __initramfs_size 0000000000e954d0 t __irf_end 000003ff800045a8 T fc_get_event_number [scsi_transport_fc] 000003ff800045d0 t store_fc_vport_disable [scsi_transport_fc] 000003ff800046a8 T scsi_is_fc_rport [scsi_transport_fc] 000003ff800046d0 t fc_target_setup [scsi_transport_fc] On s390 the kernel is located around memory address 0x200, 0x10000 or 0x100000, depending on linux version. Modules however start some- where around 0x3ff xxxx xxxx. This is different than x86 and produces a large gap for which histogram allocation fails. Fix this by detecting the kernel's last symbol and do no adjustment for it. Introduce a weak function and handle s390 specifics. Reported-by: Klaus Theurich <klaus.theurich@de.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190724122703.3996-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 08 August 2019, 18:41:25 UTC
12a6d29 Thomas Richter 24 July 2019, 12:27:02 UTC perf record: Fix module size on s390 On s390 the modules loaded in memory have the text segment located after the GOT and Relocation table. This can be seen with this output: [root@m35lp76 perf]# fgrep qeth /proc/modules qeth 151552 1 qeth_l2, Live 0x000003ff800b2000 ... [root@m35lp76 perf]# cat /sys/module/qeth/sections/.text 0x000003ff800b3990 [root@m35lp76 perf]# There is an offset of 0x1990 bytes. The size of the qeth module is 151552 bytes (0x25000 in hex). The location of the GOT/relocation table at the beginning of a module is unique to s390. commit 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map") adjusts the start address of a module in the map structures, but does not adjust the size of the modules. This leads to overlapping of module maps as this example shows: [root@m35lp76 perf] # ./perf report -D 0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x25000) @ 0]: x /lib/modules/.../qeth.ko.xz 0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x8000) @ 0]: x /lib/modules/.../ip6_tables.ko.xz The module qeth.ko has an adjusted start address modified to b3990, but its size is unchanged and the module ends at 0x3ff800d8990. This end address overlaps with the next modules start address of 0x3ff800d85a0. When the size of the leading GOT/Relocation table stored in the beginning of the text segment (0x1990 bytes) is subtracted from module qeth end address, there are no overlaps anymore: 0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000 which is the same as 0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000. To fix this issue, also adjust the modules size in function arch__fix_module_text_start(). Add another function parameter named size and reduce the size of the module when the text segment start address is changed. Output after: 0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x23670) @ 0]: x /lib/modules/.../qeth.ko.xz 0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x7a60) @ 0]: x /lib/modules/.../ip6_tables.ko.xz Reported-by: Stefan Liebler <stli@linux.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: stable@vger.kernel.org Fixes: 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map") Link: http://lkml.kernel.org/r/20190724122703.3996-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 08 August 2019, 18:41:11 UTC
fa37bab Ian Rogers 31 July 2019, 22:54:41 UTC perf tools: Fix include paths in ui directory These paths point to the wrong location but still work because they get picked up by a -I flag that happens to direct to the correct file. Fix paths to point to the correct location without -I flags. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190731225441.233800-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 08 August 2019, 18:41:11 UTC
89b6650 Masanari Iida 01 August 2019, 03:28:12 UTC perf tools: Fix a typo in a variable name in the Documentation Makefile This patch fix a spelling typo in a variable name in the Documentation Makefile. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190801032812.25018-1-standby24x7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 08 August 2019, 18:41:10 UTC
5f5e25f He Zhe 02 August 2019, 08:29:52 UTC perf cpumap: Fix writing to illegal memory in handling cpumap mask cpu_map__snprint_mask() would write to illegal memory pointed by zalloc(0) when there is only one cpu. This patch fixes the calculation and adds sanity check against the input parameters. Signed-off-by: He Zhe <zhe.he@windriver.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Fixes: 4400ac8a9a90 ("perf cpumap: Introduce cpu_map__snprint_mask()") Link: http://lkml.kernel.org/r/1564734592-15624-2-git-send-email-zhe.he@windriver.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 08 August 2019, 18:41:10 UTC
cf30ae7 He Zhe 02 August 2019, 08:29:51 UTC perf ftrace: Fix failure to set cpumask when only one cpu is present The buffer containing the string used to set cpumask is overwritten at the end of the string later in cpu_map__snprint_mask due to not enough memory space, when there is only one cpu. And thus causes the following failure: $ perf ftrace ls failed to reset ftrace $ This patch fixes the calculation of the cpumask string size. Signed-off-by: He Zhe <zhe.he@windriver.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Fixes: dc23103278c5 ("perf ftrace: Add support for -a and -C option") Link: http://lkml.kernel.org/r/1564734592-15624-1-git-send-email-zhe.he@windriver.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 08 August 2019, 18:41:10 UTC
3de7ae0 Adrian Hunter 08 August 2019, 06:48:23 UTC perf db-export: Fix thread__exec_comm() Threads synthesized from /proc have comms with a start time of zero, and not marked as "exec". Currently, there can be 2 such comms. The first is created by processing a synthesized fork event and is set to the parent's comm string, and the second by processing a synthesized comm event set to the thread's current comm string. In the absence of an "exec" comm, thread__exec_comm() picks the last (oldest) comm, which, in the case above, is the parent's comm string. For a main thread, that is very probably wrong. Use the second-to-last in that case. This affects only db-export because it is the only user of thread__exec_comm(). Example: $ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1 $ sudo chown ahunter pt-a-sleep-1 Before: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1.db branches calls $ sqlite3 -header -column pt-a-sleep-1.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kthreadd 3 78 78 5 sudo 4 15180 15180 5 sudo 5 15180 15182 7 kworker/4: 6 10335 10335 8 kthreadd 7 55 55 10 systemd 8 865 865 10 systemd 9 865 875 13 perf 10 15181 15181 15 sleep 10 15181 15181 16 kworker/3: 11 14179 14179 17 kthreadd 12 29376 29376 19 systemd 13 746 746 21 systemd 14 401 401 23 systemd 15 879 879 23 systemd 16 879 945 25 kthreadd 17 556 556 27 kworker/u1 18 14136 14136 28 kworker/u1 19 15021 15021 29 kthreadd 20 509 509 31 systemd 21 836 836 31 systemd 22 836 967 33 systemd 23 1148 1148 33 systemd 24 1148 1163 35 kworker/2: 25 17988 17988 36 kworker/0: 26 13478 13478 After: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1b.db branches calls $ sqlite3 -header -column pt-a-sleep-1b.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kswapd0 3 78 78 4 perf 4 15180 15180 4 perf 5 15180 15182 6 kworker/4: 6 10335 10335 7 kcompactd0 7 55 55 8 accounts-d 8 865 865 8 accounts-d 9 865 875 10 perf 10 15181 15181 12 sleep 10 15181 15181 13 kworker/3: 11 14179 14179 14 kworker/1: 12 29376 29376 15 haveged 13 746 746 16 systemd-jo 14 401 401 17 NetworkMan 15 879 879 17 NetworkMan 16 879 945 19 irq/131-iw 17 556 556 20 kworker/u1 18 14136 14136 21 kworker/u1 19 15021 15021 22 kworker/u1 20 509 509 23 thermald 21 836 836 23 thermald 22 836 967 25 unity-sett 23 1148 1148 25 unity-sett 24 1148 1163 27 kworker/2: 25 17988 17988 28 kworker/0: 26 13478 13478 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Fixes: 65de51f93ebf ("perf tools: Identify which comms are from exec") Link: http://lkml.kernel.org/r/20190808064823.14846-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 08 August 2019, 18:41:10 UTC
8512777 Arnaldo Carvalho de Melo 06 August 2019, 14:24:09 UTC perf annotate: Fix printing of unaugmented disassembled instructions from BPF The code to disassemble BPF programs uses binutil's disassembling routines, and those use in turn fprintf to print to a memstream FILE, adding a newline at the end of each line, which ends up confusing the TUI routines called from: annotate_browser__write() annotate_line__write() annotate_browser__printf() ui_browser__vprintf() SLsmg_vprintf() The SLsmg_vprintf() function in the slang library gets confused with the terminating newline, so make the disasm_line__parse() function that parses the lines produced by the BPF specific disassembler (that uses binutil's libopcodes) and the lines produced by the objdump based disassembler used for everything else (and that doesn't adds this terminating newline) trim the end of the line in addition of the beginning. This way when disasm_line->ops.raw, i.e. for instructions without a special scnprintf() method, we'll not have that \n getting in the way of filling the screen right after the instruction with spaces to avoid leaving what was on the screen before and thus garbling the annotation screen, breaking scrolling, etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Fixes: 6987561c9e86 ("perf annotate: Enable annotation of BPF programs") Link: https://lkml.kernel.org/n/tip-unbr5a5efakobfr6rhxq99ta@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 08 August 2019, 18:40:56 UTC
30e2353 Jia He 07 August 2019, 04:58:51 UTC arm64: mm: add missing PTE_SPECIAL in pte_mkdevmap on arm64 Without this patch, the MAP_SYNC test case will cause a print_bad_pte warning on arm64 as follows: [ 25.542693] BUG: Bad page map in process mapdax333 pte:2e8000448800f53 pmd:41ff5f003 [ 25.546360] page:ffff7e0010220000 refcount:1 mapcount:-1 mapping:ffff8003e29c7440 index:0x0 [ 25.550281] ext4_dax_aops [ 25.550282] name:"__aaabbbcccddd__" [ 25.551553] flags: 0x3ffff0000001002(referenced|reserved) [ 25.555802] raw: 03ffff0000001002 ffff8003dfffa908 0000000000000000 ffff8003e29c7440 [ 25.559446] raw: 0000000000000000 0000000000000000 00000001fffffffe 0000000000000000 [ 25.563075] page dumped because: bad pte [ 25.564938] addr:0000ffffbe05b000 vm_flags:208000fb anon_vma:0000000000000000 mapping:ffff8003e29c7440 index:0 [ 25.574272] file:__aaabbbcccddd__ fault:ext4_dax_fault mmmmap:ext4_file_mmap readpage:0x0 [ 25.578799] CPU: 1 PID: 1180 Comm: mapdax333 Not tainted 5.2.0+ #21 [ 25.581702] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 25.585624] Call trace: [ 25.587008] dump_backtrace+0x0/0x178 [ 25.588799] show_stack+0x24/0x30 [ 25.590328] dump_stack+0xa8/0xcc [ 25.591901] print_bad_pte+0x18c/0x218 [ 25.593628] unmap_page_range+0x778/0xc00 [ 25.595506] unmap_single_vma+0x94/0xe8 [ 25.597304] unmap_vmas+0x90/0x108 [ 25.598901] unmap_region+0xc0/0x128 [ 25.600566] __do_munmap+0x284/0x3f0 [ 25.602245] __vm_munmap+0x78/0xe0 [ 25.603820] __arm64_sys_munmap+0x34/0x48 [ 25.605709] el0_svc_common.constprop.0+0x78/0x168 [ 25.607956] el0_svc_handler+0x34/0x90 [ 25.609698] el0_svc+0x8/0xc [...] The root cause is in _vm_normal_page, without the PTE_SPECIAL bit, the return value will be incorrectly set to pfn_to_page(pfn) instead of NULL. Besides, this patch also rewrite the pmd_mkdevmap to avoid setting PTE_SPECIAL for pmd The MAP_SYNC test case is as follows(Provided by Yibo Cai) $#include <stdio.h> $#include <string.h> $#include <unistd.h> $#include <sys/file.h> $#include <sys/mman.h> $#ifndef MAP_SYNC $#define MAP_SYNC 0x80000 $#endif /* mount -o dax /dev/pmem0 /mnt */ $#define F "/mnt/__aaabbbcccddd__" int main(void) { int fd; char buf[4096]; void *addr; if ((fd = open(F, O_CREAT|O_TRUNC|O_RDWR, 0644)) < 0) { perror("open1"); return 1; } if (write(fd, buf, 4096) != 4096) { perror("lseek"); return 1; } addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED|MAP_SYNC, fd, 0); if (addr == MAP_FAILED) { perror("mmap"); printf("did you mount with '-o dax'?\n"); return 1; } memset(addr, 0x55, 4096); if (munmap(addr, 4096) == -1) { perror("munmap"); return 1; } close(fd); return 0; } Fixes: 73b20c84d42d ("arm64: mm: implement pte_devmap support") Reported-by: Yibo Cai <Yibo.Cai@arm.com> Acked-by: Will Deacon <will@kernel.org> Acked-by: Robin Murphy <Robin.Murphy@arm.com> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 08 August 2019, 17:38:20 UTC
518a1c2 Linus Torvalds 08 August 2019, 16:57:50 UTC Merge tag '5.3-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "Six small SMB3 fixes, two for stable" * tag '5.3-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: SMB3: Kernel oops mounting a encryptData share with CONFIG_DEBUG_VIRTUAL smb3: update TODO list of missing features smb3: send CAP_DFS capability during session setup SMB3: Fix potential memory leak when processing compound chain SMB3: Fix deadlock in validate negotiate hits reconnect cifs: fix rmmod regression in cifs.ko caused by force_sig changes 08 August 2019, 16:57:50 UTC
d0a255e Mikulas Patocka 08 August 2019, 15:17:01 UTC loop: set PF_MEMALLOC_NOIO for the worker thread A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 #12 [ffff88272f5af760] new_slab at ffffffff811f4523 #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c #23 [ffff88272f5afec0] kthread at ffffffff810a8428 #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> 08 August 2019, 16:12:21 UTC
27709ae Thiébaud Weksteen 06 August 2019, 11:00:50 UTC usb: setup authorized_default attributes using usb_bus_notify Currently, the authorized_default and interface_authorized_default attributes for HCD are set up after the uevent has been sent to userland. This creates a race condition where userland may fail to access this file when processing the event. Move the appending of these attributes earlier relying on the usb_bus_notify dispatcher. Signed-off-by: Thiébaud Weksteen <tweek@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190806110050.38918-1-tweek@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 08 August 2019, 14:07:34 UTC
e91455b Jan Kara 07 August 2019, 09:36:47 UTC bdev: Fixup error handling in blkdev_get() Commit 89e524c04fa9 ("loop: Fix mount(2) failure due to race with LOOP_SET_FD") converted blkdev_get() to use the new helpers for finishing claiming of a block device. However the conversion botched the error handling in blkdev_get() and thus the bdev has been marked as held even in case __blkdev_get() returned error. This led to occasional warnings with block/001 test from blktests like: kernel: WARNING: CPU: 5 PID: 907 at fs/block_dev.c:1899 __blkdev_put+0x396/0x3a0 Correct the error handling. CC: stable@vger.kernel.org Fixes: 89e524c04fa9 ("loop: Fix mount(2) failure due to race with LOOP_SET_FD") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> 08 August 2019, 13:37:03 UTC
fd03177 Paolo Valente 07 August 2019, 17:21:11 UTC block, bfq: handle NULL return value by bfq_init_rq() As reported in [1], the call bfq_init_rq(rq) may return NULL in case of OOM (in particular, if rq->elv.icq is NULL because memory allocation failed in failed in ioc_create_icq()). This commit handles this circumstance. [1] https://lkml.org/lkml/2019/7/22/824 Cc: Hsin-Yi Wang <hsinyi@google.com> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Hsin-Yi Wang <hsinyi@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> 08 August 2019, 13:31:50 UTC
3f758e8 Paolo Valente 07 August 2019, 14:17:54 UTC block, bfq: move update of waker and woken list to queue freeing Since commit 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O"), every bfq_queue has a pointer to a waker bfq_queue and a list of the bfq_queues it may wake. In this respect, when a bfq_queue, say Q, remains with no I/O source attached to it, Q cannot be woken by any other bfq_queue, and cannot wake any other bfq_queue. Then Q must be removed from the woken list of its possible waker bfq_queue, and all bfq_queues in the woken list of Q must stop having a waker bfq_queue. Q remains with no I/O source in two cases: when the last process associated with Q exits or when such a process gets associated with a different bfq_queue. Unfortunately, commit 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") performed the above updates only in the first case. This commit fixes this bug by moving these updates to when Q gets freed. This is a simple and safe way to handle all cases, as both the above events, process exit and re-association, lead to Q being freed soon, and because dangling references would come out only after Q gets freed (if no update were performed). Fixes: 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> 08 August 2019, 13:30:52 UTC
08d383a Paolo Valente 07 August 2019, 14:17:53 UTC block, bfq: reset last_completed_rq_bfqq if the pointed queue is freed Since commit 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O"), BFQ stores, in a per-device pointer last_completed_rq_bfqq, the last bfq_queue that had an I/O request completed. If some bfq_queue receives new I/O right after the last request of last_completed_rq_bfqq has been completed, then last_completed_rq_bfqq may be a waker bfq_queue. But if the bfq_queue last_completed_rq_bfqq points to is freed, then last_completed_rq_bfqq becomes a dangling reference. This commit resets last_completed_rq_bfqq if the pointed bfq_queue is freed. Fixes: 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> 08 August 2019, 13:30:50 UTC
430380b He Zhe 08 August 2019, 03:09:54 UTC block: aoe: Fix kernel crash due to atomic sleep when exiting Since commit 3582dd291788 ("aoe: convert aoeblk to blk-mq"), aoedev_downdev has had the possibility of sleeping and causing the following crash. BUG: scheduling while atomic: rmmod/2242/0x00000003 Modules linked in: aoe Preemption disabled at: [<ffffffffc01d95e5>] flush+0x95/0x4a0 [aoe] CPU: 7 PID: 2242 Comm: rmmod Tainted: G I 5.2.3 #1 Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.10.0025.030220091519 03/02/2009 Call Trace: dump_stack+0x4f/0x6a ? flush+0x95/0x4a0 [aoe] __schedule_bug.cold+0x44/0x54 __schedule+0x44f/0x680 schedule+0x44/0xd0 blk_mq_freeze_queue_wait+0x46/0xb0 ? wait_woken+0x80/0x80 blk_mq_freeze_queue+0x1b/0x20 aoedev_downdev+0x111/0x160 [aoe] flush+0xff/0x4a0 [aoe] aoedev_exit+0x23/0x30 [aoe] aoe_exit+0x35/0x948 [aoe] __se_sys_delete_module+0x183/0x210 __x64_sys_delete_module+0x16/0x20 do_syscall_64+0x4d/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f24e0043b07 Code: 73 01 c3 48 8b 0d 89 73 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 59 73 0b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe18f7f1e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f24e0043b07 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000555c3ecf87c8 RBP: 00007ffe18f7f1f0 R08: 0000000000000000 R09: 0000000000000000 R10: 00007f24e00b4ac0 R11: 0000000000000206 R12: 00007ffe18f7f238 R13: 00007ffe18f7f410 R14: 00007ffe18f80e73 R15: 0000555c3ecf8760 This patch, handling in the same way of pass two, unlocks the locks and restart pass one after aoedev_downdev is done. Fixes: 3582dd291788 ("aoe: convert aoeblk to blk-mq") Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 08 August 2019, 13:29:02 UTC
739bacb Vasily Gorbik 21 January 2019, 12:54:53 UTC s390/build: use size command to perform empty .bss check Currently empty .bss checks performed do not pay attention to "common objects" in object files which end up in .bss section eventually. The "size" tool is a part of binutils and since version 2.18 provides "--common" command line option, which allows to account "common objects" sizes in .bss section size. Utilize "size --common" to perform accurate check that .bss section is unused. Besides that the size tool handles object files without .bss section gracefully and doesn't require additional objdump run. The linux kernel requires binutils 2.20 since 4.13. Kbuild exports OBJSIZE to reference the right size tool. Link: http://lkml.kernel.org/r/patch-2.thread-2257a1.git-2257a1c53d4a.your-ad-here.call-01565088755-ext-5120@work.hours Reported-and-tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> 08 August 2019, 12:36:53 UTC
7bac987 Vasily Gorbik 21 January 2019, 12:54:39 UTC kbuild: add OBJSIZE variable for the size tool Define and export OBJSIZE variable for "size" tool from binutils to be used in architecture specific Makefiles (naming the variable just "SIZE" would be too risky). In particular this tool is useful to perform checks that early boot code is not using bss section (which might have not been zeroed yet or intersects with initrd or other files boot loader might have put right after the linux kernel). Link: http://lkml.kernel.org/r/patch-1.thread-2257a1.git-188f5a3d81d5.your-ad-here.call-01565088755-ext-5120@work.hours Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> 08 August 2019, 12:36:51 UTC
6cf9481 Hans de Goede 30 July 2019, 15:48:48 UTC pwm: Fallback to the static lookup-list when acpi_pwm_get fails Commit 4a6ef8e37c4d ("pwm: Add support referencing PWMs from ACPI") made pwm_get unconditionally return the acpi_pwm_get return value if the device passed to pwm_get has an ACPI fwnode. But even if the passed in device has an ACPI fwnode, it does not necessarily have the necessary ACPI package defining its pwm bindings, especially since the binding / API of this ACPI package has only been introduced very recently. Up until now X86/ACPI devices which use a separate pwm controller for controlling their LCD screen's backlight brightness have been relying on the static lookup-list to get their pwm. pwm_get unconditionally returning the acpi_pwm_get return value breaks this, breaking backlight control on these devices. This commit fixes this by making pwm_get fall back to the static lookup-list if acpi_pwm_get returns -ENOENT. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=96571 Reported-by: youling257@gmail.com Fixes: 4a6ef8e37c4d ("pwm: Add support referencing PWMs from ACPI") Cc: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> 08 August 2019, 11:17:38 UTC
c468a8a Oliver Neukum 08 August 2019, 09:27:28 UTC usb: iowarrior: fix deadlock on disconnect We have to drop the mutex before we close() upon disconnect() as close() needs the lock. This is safe to do by dropping the mutex as intfdata is already set to NULL, so open() will fail. Fixes: 03f36e885fc26 ("USB: open disconnect race in iowarrior") Reported-by: syzbot+a64a382964bf6c71a9c0@syzkaller.appspotmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20190808092728.23417-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 08 August 2019, 10:43:18 UTC
back to top