Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
cac7f24 Linus Torvalds 26 October 2014, 23:48:41 UTC Linux 3.18-rc2 26 October 2014, 23:48:41 UTC
88e2376 Linus Torvalds 26 October 2014, 18:35:51 UTC Merge tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another week, another small batch of fixes. Most of these make zynq, socfpga and sunxi platforms work a bit better: - due to new requirements for regulators, DWMMC on socfpga broke past v3.17 - SMP spinup fix for socfpga - a few DT fixes for zynq - another option (FIXED_REGULATOR) for sunxi is needed that used to be selected by other options but no longer is. - a couple of small DT fixes for at91 - ...and a couple for i.MX" * tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE ARM: dts: socfpga: Add a 3.3V fixed regulator node ARM: dts: socfpga: Fix SD card detect ARM: dts: socfpga: rename gpio nodes ARM: at91/dt: sam9263: fix PLLB frequencies power: reset: at91-reset: fix power down register MAINTAINERS: add atmel ssc driver maintainer entry arm: socfpga: fix fetching cpu1start_addr for SMP ARM: zynq: DT: trivial: Fix mc node ARM: zynq: DT: Add cadence watchdog node ARM: zynq: DT: Add missing reference for memory-controller ARM: zynq: DT: Add missing reference for ADC ARM: zynq: DT: Add missing address for L2 pl310 ARM: zynq: DT: Remove 222 MHz OPP ARM: zynq: DT: Fix GEM register area size 26 October 2014, 18:35:51 UTC
d1e14f1 Linus Torvalds 26 October 2014, 18:19:18 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "overlayfs merge + leak fix for d_splice_alias() failure exits" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: overlayfs: embed middle into overlay_readdir_data overlayfs: embed root into overlay_readdir_data overlayfs: make ovl_cache_entry->name an array instead of pointer overlayfs: don't hold ->i_mutex over opening the real directory fix inode leaks on d_splice_alias() failure exits fs: limit filesystem stacking depth overlay: overlay filesystem documentation overlayfs: implement show_options overlayfs: add statfs support overlay filesystem shmem: support RENAME_WHITEOUT ext4: support RENAME_WHITEOUT vfs: add RENAME_WHITEOUT vfs: add whiteout support vfs: export check_sticky() vfs: introduce clone_private_mount() vfs: export __inode_permission() to modules vfs: export do_splice_direct() to modules vfs: add i_op->dentry_open() 26 October 2014, 18:19:18 UTC
efc176a Olof Johansson 26 October 2014, 03:44:05 UTC Merge tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.18" from Shawn Guo: The i.MX fixes for 3.18: - Revert one patch which increases I2C bus frequency on imx28-evk - Fix a typo on imx6q EIM clock name * tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo Signed-off-by: Olof Johansson <olof@lixom.net> 26 October 2014, 03:44:05 UTC
d1e61eb Fabio Estevam 20 October 2014, 13:08:01 UTC ARM: dts: imx28-evk: Let i2c0 run at 100kHz Commit 78b81f4666fb ("ARM: dts: imx28-evk: Run I2C0 at 400kHz") caused issues when doing the following sequence in loop: - Boot the kernel - Perform audio playback - Reboot the system via 'reboot' command In many times the audio card cannot be probed, which causes playback to fail. After restoring to the original i2c0 frequency of 100kHz there is no such problem anymore. This reverts commit 78b81f4666fbb22a20b1e63e5baf197ad2e90e88. Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 25 October 2014, 12:17:36 UTC
a1fc198 Steve Longerbeam 14 October 2014, 17:41:49 UTC ARM: i.MX6: Fix "emi" clock name typo Fix a typo error, the "emi" names refer to the eim clocks. The change fixes typo in EIM and EIM_SLOW pre-output dividers and selectors clock names. Notably EIM_SLOW clock itself is named correctly. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> [vladimir_zapolskiy@mentor.com: ported to v3.17] Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> 25 October 2014, 12:01:09 UTC
db6ec21 Al Viro 24 October 2014, 03:03:03 UTC overlayfs: embed middle into overlay_readdir_data same story... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 25 October 2014, 00:25:23 UTC
49be4fb Al Viro 24 October 2014, 03:00:53 UTC overlayfs: embed root into overlay_readdir_data no sense having it a pointer - all instances have it pointing to local variable in the same stack frame Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 25 October 2014, 00:25:23 UTC
68bf861 Al Viro 24 October 2014, 02:58:56 UTC overlayfs: make ovl_cache_entry->name an array instead of pointer Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 25 October 2014, 00:25:22 UTC
3d268c9 Al Viro 24 October 2014, 02:56:05 UTC overlayfs: don't hold ->i_mutex over opening the real directory just use it to serialize the assignment Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 25 October 2014, 00:24:11 UTC
2cc9188 Linus Torvalds 24 October 2014, 19:48:47 UTC Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "This is the first round of fixes and tying up loose ends for MIPS. - plenty of fixes for build errors in specific obscure configurations - remove redundant code on the Lantiq platform - removal of a useless SEAD I2C driver that was causing a build issue - fix an earlier TLB exeption handler fix to also work on Octeon. - fix ISA level dependencies in FPU emulator's instruction decoding. - don't hardcode kernel command line in Octeon software emulator. - fix an earlier fix for the Loondson 2 clock setting" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: SEAD3: Fix I2C device registration. MIPS: SEAD3: Nuke PIC32 I2C driver. MIPS: ftrace: Fix a microMIPS build problem MIPS: MSP71xx: Fix build error MIPS: Malta: Do not build the malta-amon.c file if CMP is not enabled MIPS: Prevent compiler warning from cop2_{save,restore} MIPS: Kconfig: Add missing MIPS_CPS dependencies to PM and cpuidle MIPS: idle: Remove leftover __pastwait symbol and its references MIPS: Sibyte: Include the swarm subdir to the sb1250 LittleSur builds MIPS: ptrace.h: Add a missing include MIPS: ath79: Fix compilation error when CONFIG_PCI is disabled MIPS: MSP71xx: Remove compilation error when CONFIG_MIPS_MT is present MIPS: Octeon: Remove special case for simulator command line. MIPS: tlbex: Properly fix HUGE TLB Refill exception handler MIPS: loongson2_cpufreq: Fix CPU clock rate setting mismerge pci: pci-lantiq: remove duplicate check on resource MIPS: Lasat: Add missing CONFIG_PROC_FS dependency to PICVUE_PROC MIPS: cp1emu: Fix ISA restrictions for cop1x_op instructions 24 October 2014, 19:48:47 UTC
cdc63a0 Linus Torvalds 24 October 2014, 19:48:04 UTC Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - enable 48-bit VA space now that KVM has been fixed, together with a couple of fixes for pgd allocation alignment and initial memblock current_limit. There is still a dependency on !ARM_SMMU which needs to be updated as it uses the page table manipulation macros of the host kernel - eBPF fixes following changes/conflicts during the merging window - Compat types affecting compat_elf_prpsinfo - Compilation error on UP builds - ASLR fix when /proc/sys/kernel/randomize_va_space == 0 - DT definitions for CLCD support on ARMv8 model platform * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix memblock current_limit with 64K pages and 48-bit VA arm64: ASLR: Don't randomise text when randomise_va_space == 0 arm64: vexpress: Add CLCD support to the ARMv8 model platform arm64: Fix compilation error on UP builds Documentation/arm64/memory.txt: fix typo net: bpf: arm64: minor fix of type in jited arm64: bpf: add 'load 64-bit immediate' instruction arm64: bpf: add 'shift by register' instructions net: bpf: arm64: address randomize and write protect JIT code arm64: mm: Correct fixmap pagetable types arm64: compat: fix compat types affecting struct compat_elf_prpsinfo arm64: Align less than PAGE_SIZE pgds naturally arm64: Allow 48-bits VA space without ARM_SMMU 24 October 2014, 19:48:04 UTC
83da00f Linus Torvalds 24 October 2014, 19:45:47 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull two sparc fixes from David Miller: 1) Fix boots with gcc-4.9 compiled sparc64 kernels. 2) Add missing __get_user_pages_fast() on sparc64 to fix hangs on futexes used in transparent hugepage areas. It's really idiotic to have a weak symbolled fallback that just returns zero, and causes this kind of bug. There should be no backup implementation and the link should fail if the architecture fails to provide __get_user_pages_fast() and supports transparent hugepages. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Implement __get_user_pages_fast(). sparc64: Fix register corruption in top-most kernel stack frame during boot. 24 October 2014, 19:45:47 UTC
96971e9 Linus Torvalds 24 October 2014, 19:42:55 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "This is a pretty large update. I think it is roughly as big as what I usually had for the _whole_ rc period. There are a few bad bugs where the guest can OOPS or crash the host. We have also started looking at attack models for nested virtualization; bugs that usually result in the guest ring 0 crashing itself become more worrisome if you have nested virtualization, because the nested guest might bring down the non-nested guest as well. For current uses of nested virtualization these do not really have a security impact, but you never know and bugs are bugs nevertheless. A lot of these bugs are in 3.17 too, resulting in a large number of stable@ Ccs. I checked that all the patches apply there with no conflicts" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: vfio: fix unregister kvm_device_ops of vfio KVM: x86: Wrong assertion on paging_tmpl.h kvm: fix excessive pages un-pinning in kvm_iommu_map error path. KVM: x86: PREFETCH and HINT_NOP should have SrcMem flag KVM: x86: Emulator does not decode clflush well KVM: emulate: avoid accessing NULL ctxt->memopp KVM: x86: Decoding guest instructions which cross page boundary may fail kvm: x86: don't kill guest on unknown exit reason kvm: vmx: handle invvpid vm exit gracefully KVM: x86: Handle errors when RIP is set during far jumps KVM: x86: Emulator fixes for eip canonical checks on near branches KVM: x86: Fix wrong masking on relative jump/call KVM: x86: Improve thread safety in pit KVM: x86: Prevent host from panicking on shared MSR writes. KVM: x86: Check non-canonical addresses upon WRMSR 24 October 2014, 19:42:55 UTC
20ca57c Linus Torvalds 24 October 2014, 19:41:50 UTC Merge tag 'stable/for-linus-3.18-b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: - Fix regression in xen_clocksource_read() which caused all Xen guests to crash early in boot. - Several fixes for super rare race conditions in the p2m. - Assorted other minor fixes. * tag 'stable/for-linus-3.18-b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pci: Allocate memory for physdev_pci_device_add's optarr x86/xen: panic on bad Xen-provided memory map x86/xen: Fix incorrect per_cpu accessor in xen_clocksource_read() x86/xen: avoid race in p2m handling x86/xen: delay construction of mfn_list_list x86/xen: avoid writing to freed memory after race in p2m handling xen/balloon: Don't continue ballooning when BP_ECANCELED is encountered 24 October 2014, 19:41:50 UTC
c6d1340 Linus Torvalds 24 October 2014, 19:35:48 UTC Merge tag 'sound-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are a chunk of small fixes since rc1: two PCM core fixes, one is a long-standing annoyance about lockdep and another is an ARM64 mmap fix. The rest are a HD-audio HDMI hotplug notification fix, a fix for missing NULL termination in Realtek codec quirks and a few new device/codec-specific quirks as usual" * tag 'sound-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add missing terminating entry to SND_HDA_PIN_QUIRK macro ALSA: pcm: Fix false lockdep warnings ALSA: hda - Fix inverted LED gpio setup for Lenovo Ideapad ALSA: hda - hdmi: Fix missing ELD change event on plug/unplug ALSA: usb-audio: Add support for Steinberg UR22 USB interface ALSA: ALC283 codec - Avoid pop noise on headphones during suspend/resume ALSA: pcm: use the same dma mmap codepath both for arm and arm64 24 October 2014, 19:35:48 UTC
14d4cc0 Linus Torvalds 24 October 2014, 19:33:32 UTC Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull /dev/random updates from Ted Ts'o: "This adds a memzero_explicit() call which is guaranteed not to be optimized away by GCC. This is important when we are wiping cryptographically sensitive material" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: crypto: memzero_explicit - make sure to clear out sensitive data random: add and use memzero_explicit() for clearing data 24 October 2014, 19:33:32 UTC
1c45d9a Linus Torvalds 24 October 2014, 18:29:31 UTC Merge tag 'pm+acpi-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This is material that didn't make it to my 3.18-rc1 pull request for various reasons, mostly related to timing and travel (LinuxCon EU / LPC) plus a couple of fixes for recent bugs. The only really new thing here is the PM QoS class for memory bandwidth, but it is simple enough and users of it will be added in the next cycle. One major change in behavior is that platform devices enumerated by ACPI will use 32-bit DMA mask by default. Also included is an ACPICA update to a new upstream release, but that's mostly cleanups, changes in tools and similar. The rest is fixes and cleanups mostly. Specifics: - Fix for a recent PCI power management change that overlooked the fact that some IRQ chips might not be able to configure PCIe PME for system wakeup from Lucas Stach. - Fix for a bug introduced in 3.17 where acpi_device_wakeup() is called with a wrong ordering of arguments from Zhang Rui. - A bunch of intel_pstate driver fixes (all -stable candidates) from Dirk Brandewie, Gabriele Mazzotta and Pali Rohár. - Fixes for a rather long-standing problem with the OOM killer and the freezer that frozen processes killed by the OOM do not actually release any memory until they are thawed, so OOM-killing them is rather pointless, with a couple of cleanups on top (Michal Hocko, Cong Wang, Rafael J Wysocki). - ACPICA update to upstream release 20140926, inlcuding mostly cleanups reducing differences between the upstream ACPICA and the kernel code, tools changes (acpidump, acpiexec) and support for the _DDN object (Bob Moore, Lv Zheng). - New PM QoS class for memory bandwidth from Tomeu Vizoso. - Default 32-bit DMA mask for platform devices enumerated by ACPI (this change is mostly needed for some drivers development in progress targeted at 3.19) from Heikki Krogerus. - ACPI EC driver cleanups, mostly related to debugging, from Lv Zheng. - cpufreq-dt driver updates from Thomas Petazzoni. - powernv cpuidle driver update from Preeti U Murthy" * tag 'pm+acpi-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits) intel_pstate: Correct BYT VID values. intel_pstate: Fix BYT frequency reporting intel_pstate: Don't lose sysfs settings during cpu offline cpufreq: intel_pstate: Reflect current no_turbo state correctly cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy PCI / PM: handle failure to enable wakeup on PCIe PME ACPI: invoke acpi_device_wakeup() with correct parameters PM / freezer: Clean up code after recent fixes PM: convert do_each_thread to for_each_process_thread OOM, PM: OOM killed task shouldn't escape PM suspend freezer: remove obsolete comments in __thaw_task() freezer: Do not freeze tasks killed by OOM killer ACPI / platform: provide default DMA mask cpuidle: powernv: Populate cpuidle state details by querying the device-tree cpufreq: cpufreq-dt: adjust message related to regulators cpufreq: cpufreq-dt: extend with platform_data cpufreq: allow driver-specific data ACPI / EC: Cleanup coding style. ACPI / EC: Refine event/query debugging messages. ... 24 October 2014, 18:29:31 UTC
8264fce Linus Torvalds 24 October 2014, 18:21:43 UTC Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "Sorry that I missed the merge window as there is a bug found in the last minute, and I have to fix it and wait for the code to be tested in linux-next tree for a few days. Now the buggy patch has been dropped entirely from my next branch. Thus I hope those changes can still be merged in 3.18-rc2 as most of them are platform thermal driver changes. Specifics: - introduce ACPI INT340X thermal drivers. Newer laptops and tablets may have thermal sensors and other devices with thermal control capabilities that are exposed for the OS to use via the ACPI INT340x device objects. Several drivers are introduced to expose the temperature information and cooling ability from these objects to user-space via the normal thermal framework. From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui. - introduce a new thermal governor, which just uses a hysteresis to switch abruptly on/off a cooling device. This governor can be used to control certain fan devices that can not be throttled but just switched on or off. From: Peter Feuerer. - introduce support for some new thermal interrupt functions on i.MX6SX, in IMX thermal driver. From: Anson, Huang. - introduce tracing support on thermal framework. From: Punit Agrawal. - small fixes in OF thermal and thermal step_wise governor" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) Thermal: int340x thermal: select ACPI fan driver Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs Thermal: int340x_thermal: expose acpi thermal relationship tables Thermal: introduce int3403 thermal driver Thermal: introduce INT3402 thermal driver Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h ACPI / Fan: support INT3404 thermal device ACPI / Fan: add ACPI 4.0 style fan support ACPI / fan: convert to platform driver ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant ACPI / fan: remove no need check for device pointer ACPI / fan: remove unused macro Thermal: int3400 thermal: register to thermal framework Thermal: int3400 thermal: add capability to detect supporting UUIDs Thermal: introduce int3400 thermal driver ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package() ACPI: make acpi_create_platform_device() an external API thermal: step_wise: fix: Prevent from binary overflow when trend is dropping ACPI: introduce ACPI int340x thermal scan handler thermal: Added Bang-bang thermal governor ... 24 October 2014, 18:21:43 UTC
3dec0fe Catalin Marinas 24 October 2014, 17:16:47 UTC arm64: Fix memblock current_limit with 64K pages and 48-bit VA With 48-bit VA space, the 64K page configuration uses 3 levels instead of 2 and PUD_SIZE != PMD_SIZE. Since with 64K pages we only cover PMD_SIZE with the initial swapper_pg_dir populated in head.S, the memblock current_limit needs to be set accordingly in map_mem() to avoid allocating unmapped memory. The memblock current_limit is progressively increased as more blocks are mapped. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 24 October 2014, 17:16:47 UTC
06090e8 David S. Miller 24 October 2014, 16:59:02 UTC sparc64: Implement __get_user_pages_fast(). It is not sufficient to only implement get_user_pages_fast(), you must also implement the atomic version __get_user_pages_fast() otherwise you end up using the weak symbol fallback implementation which simply returns zero. This is dangerous, because it causes the futex code to loop forever if transparent hugepages are supported (see get_futex_key()). Signed-off-by: David S. Miller <davem@davemloft.net> 24 October 2014, 16:59:02 UTC
ef3e035 David S. Miller 23 October 2014, 19:58:13 UTC sparc64: Fix register corruption in top-most kernel stack frame during boot. Meelis Roos reported that kernels built with gcc-4.9 do not boot, we eventually narrowed this down to only impacting machines using UltraSPARC-III and derivitive cpus. The crash happens right when the first user process is spawned: [ 54.451346] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 [ 54.451346] [ 54.571516] CPU: 1 PID: 1 Comm: init Not tainted 3.16.0-rc2-00211-gd7933ab #96 [ 54.666431] Call Trace: [ 54.698453] [0000000000762f8c] panic+0xb0/0x224 [ 54.759071] [000000000045cf68] do_exit+0x948/0x960 [ 54.823123] [000000000042cbc0] fault_in_user_windows+0xe0/0x100 [ 54.902036] [0000000000404ad0] __handle_user_windows+0x0/0x10 [ 54.978662] Press Stop-A (L1-A) to return to the boot prom [ 55.050713] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 Further investigation showed that compiling only per_cpu_patch() with an older compiler fixes the boot. Detailed analysis showed that the function is not being miscompiled by gcc-4.9, but it is using a different register allocation ordering. With the gcc-4.9 compiled function, something during the code patching causes some of the %i* input registers to get corrupted. Perhaps we have a TLB miss path into the firmware that is deep enough to cause a register window spill and subsequent restore when we get back from the TLB miss trap. Let's plug this up by doing two things: 1) Stop using the firmware stack for client interface calls into the firmware. Just use the kernel's stack. 2) As soon as we can, call into a new function "start_early_boot()" to put a one-register-window buffer between the firmware's deepest stack frame and the top-most initial kernel one. Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net> 24 October 2014, 16:52:49 UTC
9298040 Arun Chandran 10 October 2014, 11:31:24 UTC arm64: ASLR: Don't randomise text when randomise_va_space == 0 When user asks to turn off ASLR by writing "0" to /proc/sys/kernel/randomize_va_space there should not be any randomization to mmap base, stack, VDSO, libs, text and heap Currently arm64 violates this behavior by randomising text. Fix this by defining a constant ELF_ET_DYN_BASE. The randomisation of mm->mmap_base is done by setup_new_exec -> arch_pick_mmap_layout -> mmap_base -> mmap_rnd. Signed-off-by: Arun Chandran <achandran@mvista.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 24 October 2014, 14:47:49 UTC
4846f11 Ralf Baechle 24 October 2014, 10:23:26 UTC MIPS: SEAD3: Fix I2C device registration. This isn't a module and shouldn't be one. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 24 October 2014, 11:34:42 UTC
571ee1b Wanpeng Li 09 October 2014, 10:30:08 UTC kvm: vfio: fix unregister kvm_device_ops of vfio After commit 80ce163 (KVM: VFIO: register kvm_device_ops dynamically), kvm_device_ops of vfio can be registered dynamically. Commit 3c3c29fd (kvm-vfio: do not use module_init) move the dynamic register invoked by kvm_init in order to fix broke unloading of the kvm module. However, kvm_device_ops of vfio is unregistered after rmmod kvm-intel module which lead to device type collision detection warning after kvm-intel module reinsmod. WARNING: CPU: 1 PID: 10358 at /root/cathy/kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:3289 kvm_init+0x234/0x282 [kvm]() Modules linked in: kvm_intel(O+) kvm(O) nfsv3 nfs_acl auth_rpcgss oid_registry nfsv4 dns_resolver nfs fscache lockd sunrpc pci_stub bridge stp llc autofs4 8021q cpufreq_ondemand ipv6 joydev microcode pcspkr igb i2c_algo_bit ehci_pci ehci_hcd e1000e i2c_i801 ixgbe ptp pps_core hwmon mdio tpm_tis tpm ipmi_si ipmi_msghandler acpi_cpufreq isci libsas scsi_transport_sas button dm_mirror dm_region_hash dm_log dm_mod [last unloaded: kvm_intel] CPU: 1 PID: 10358 Comm: insmod Tainted: G W O 3.17.0-rc1 #2 Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013 0000000000000cd9 ffff880ff08cfd18 ffffffff814a61d9 0000000000000cd9 0000000000000000 ffff880ff08cfd58 ffffffff810417b7 ffff880ff08cfd48 ffffffffa045bcac ffffffffa049c420 0000000000000040 00000000000000ff Call Trace: [<ffffffff814a61d9>] dump_stack+0x49/0x60 [<ffffffff810417b7>] warn_slowpath_common+0x7c/0x96 [<ffffffffa045bcac>] ? kvm_init+0x234/0x282 [kvm] [<ffffffff810417e6>] warn_slowpath_null+0x15/0x17 [<ffffffffa045bcac>] kvm_init+0x234/0x282 [kvm] [<ffffffffa016e995>] vmx_init+0x1bf/0x42a [kvm_intel] [<ffffffffa016e7d6>] ? vmx_check_processor_compat+0x64/0x64 [kvm_intel] [<ffffffff810002ab>] do_one_initcall+0xe3/0x170 [<ffffffff811168a9>] ? __vunmap+0xad/0xb8 [<ffffffff8109c58f>] do_init_module+0x2b/0x174 [<ffffffff8109d414>] load_module+0x43e/0x569 [<ffffffff8109c6d8>] ? do_init_module+0x174/0x174 [<ffffffff8109c75a>] ? copy_module_from_user+0x39/0x82 [<ffffffff8109b7dd>] ? module_sect_show+0x20/0x20 [<ffffffff8109d65f>] SyS_init_module+0x54/0x81 [<ffffffff814a9a12>] system_call_fastpath+0x16/0x1b ---[ end trace 0626f4a3ddea56f3 ]--- The bug can be reproduced by: rmmod kvm_intel.ko insmod kvm_intel.ko without rmmod/insmod kvm.ko This patch fixes the bug by unregistering kvm_device_ops of vfio when the kvm-intel module is removed. Reported-by: Liu Rongrong <rongrongx.liu@intel.com> Fixes: 3c3c29fd0d7cddc32862c350d0700ce69953e3bd Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 October 2014, 11:30:47 UTC
1715d0d Nadav Amit 30 September 2014, 17:49:18 UTC KVM: x86: Wrong assertion on paging_tmpl.h Even after the recent fix, the assertion on paging_tmpl.h is triggered. Apparently, the assertion wants to check that the PAE is always set on long-mode, but does it in incorrect way. Note that the assertion is not enabled unless the code is debugged by defining MMU_DEBUG. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 October 2014, 11:30:37 UTC
3d32e4d Quentin Casasnovas 17 October 2014, 20:55:59 UTC kvm: fix excessive pages un-pinning in kvm_iommu_map error path. The third parameter of kvm_unpin_pages() when called from kvm_iommu_map_pages() is wrong, it should be the number of pages to un-pin and not the page size. This error was facilitated with an inconsistent API: kvm_pin_pages() takes a size, but kvn_unpin_pages() takes a number of pages, so fix the problem by matching the two. This was introduced by commit 350b8bd ("kvm: iommu: fix the third parameter of kvm_iommu_put_pages (CVE-2014-3601)"), which fixes the lack of un-pinning for pages intended to be un-pinned (i.e. memory leak) but unfortunately potentially aggravated the number of pages we un-pin that should have stayed pinned. As far as I understand though, the same practical mitigations apply. This issue was found during review of Red Hat 6.6 patches to prepare Ksplice rebootless updates. Thanks to Vegard for his time on a late Friday evening to help me in understanding this code. Fixes: 350b8bd ("kvm: iommu: fix the third parameter of... (CVE-2014-3601)") Cc: stable@vger.kernel.org Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Jamie Iles <jamie.iles@oracle.com> Reviewed-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 October 2014, 11:30:37 UTC
3f6f148 Nadav Amit 13 October 2014, 10:04:14 UTC KVM: x86: PREFETCH and HINT_NOP should have SrcMem flag The decode phase of the x86 emulator assumes that every instruction with the ModRM flag, and which can be used with RIP-relative addressing, has either SrcMem or DstMem. This is not the case for several instructions - prefetch, hint-nop and clflush. Adding SrcMem|NoAccess for prefetch and hint-nop and SrcMem for clflush. This fixes CVE-2014-8480. Fixes: 41061cdb98a0bec464278b4db8e894a3121671f5 Cc: stable@vger.kernel.org Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 October 2014, 11:30:36 UTC
13e457e Nadav Amit 13 October 2014, 10:04:13 UTC KVM: x86: Emulator does not decode clflush well Currently, all group15 instructions are decoded as clflush (e.g., mfence, xsave). In addition, the clflush instruction requires no prefix (66/f2/f3) would exist. If prefix exists it may encode a different instruction (e.g., clflushopt). Creating a group for clflush, and different group for each prefix. This has been the case forever, but the next patch needs the cflush group in order to fix a bug introduced in 3.17. Fixes: 41061cdb98a0bec464278b4db8e894a3121671f5 Cc: stable@vger.kernel.org Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 October 2014, 11:30:36 UTC
a430c91 Paolo Bonzini 23 October 2014, 12:54:14 UTC KVM: emulate: avoid accessing NULL ctxt->memopp A failure to decode the instruction can cause a NULL pointer access. This is fixed simply by moving the "done" label as close as possible to the return. This fixes CVE-2014-8481. Reported-by: Andy Lutomirski <luto@amacapital.net> Cc: stable@vger.kernel.org Fixes: 41061cdb98a0bec464278b4db8e894a3121671f5 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 October 2014, 11:30:35 UTC
cc08d25 Ralf Baechle 24 October 2014, 11:27:37 UTC MIPS: SEAD3: Nuke PIC32 I2C driver. A platform driver for which nothing ever registers the corresponding platform device. Also it was driving the same hardware as sead3-i2c-drv.c so redundant anyway and couldn't co-exist with that driver because each of them was using a private spinlock to protect access to the same hardware resources. This also fixes a randconfig problem: arch/mips/mti-sead3/sead3-pic32-i2c-drv.c: In function 'i2c_platform_probe': arch/mips/mti-sead3/sead3-pic32-i2c-drv.c:345:2: error: implicit declaration of function 'i2c_add_numbered_adapter' [-Werror=implicit-function-declaration] ret = i2c_add_numbered_adapter(&priv->adap); ^ arch/mips/mti-sead3/sead3-pic32-i2c-drv.c: In function 'i2c_platform_remove': arch/mips/mti-sead3/sead3-pic32-i2c-drv.c:361:2: error: implicit declaration of function 'i2c_del_adapter' [-Werror=implicit-function-declaration] i2c_del_adapter(&priv->adap); Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 24 October 2014, 11:27:37 UTC
08da44a Nadav Amit 02 October 2014, 22:10:04 UTC KVM: x86: Decoding guest instructions which cross page boundary may fail Once an instruction crosses a page boundary, the size read from the second page disregards the common case that part of the operand resides on the first page. As a result, fetch of long insturctions may fail, and thereby cause the decoding to fail as well. Cc: stable@vger.kernel.org Fixes: 5cfc7e0f5e5e1adf998df94f8e36edaf5d30d38e Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 October 2014, 11:21:18 UTC
2bc19dc Michael S. Tsirkin 18 September 2014, 13:21:16 UTC kvm: x86: don't kill guest on unknown exit reason KVM_EXIT_UNKNOWN is a kvm bug, we don't really know whether it was triggered by a priveledged application. Let's not kill the guest: WARN and inject #UD instead. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 October 2014, 11:21:17 UTC
a642fc3 Petr Matousek 23 September 2014, 18:22:30 UTC kvm: vmx: handle invvpid vm exit gracefully On systems with invvpid instruction support (corresponding bit in IA32_VMX_EPT_VPID_CAP MSR is set) guest invocation of invvpid causes vm exit, which is currently not handled and results in propagation of unknown exit to userspace. Fix this by installing an invvpid vm exit handler. This is CVE-2014-3646. Cc: stable@vger.kernel.org Signed-off-by: Petr Matousek <pmatouse@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 October 2014, 11:21:17 UTC
d1442d8 Nadav Amit 18 September 2014, 19:39:39 UTC KVM: x86: Handle errors when RIP is set during far jumps Far jmp/call/ret may fault while loading a new RIP. Currently KVM does not handle this case, and may result in failed vm-entry once the assignment is done. The tricky part of doing so is that loading the new CS affects the VMCS/VMCB state, so if we fail during loading the new RIP, we are left in unconsistent state. Therefore, this patch saves on 64-bit the old CS descriptor and restores it if loading RIP failed. This fixes CVE-2014-3647. Cc: stable@vger.kernel.org Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 October 2014, 11:21:16 UTC
234f3ce Nadav Amit 18 September 2014, 19:39:38 UTC KVM: x86: Emulator fixes for eip canonical checks on near branches Before changing rip (during jmp, call, ret, etc.) the target should be asserted to be canonical one, as real CPUs do. During sysret, both target rsp and rip should be canonical. If any of these values is noncanonical, a #GP exception should occur. The exception to this rule are syscall and sysenter instructions in which the assigned rip is checked during the assignment to the relevant MSRs. This patch fixes the emulator to behave as real CPUs do for near branches. Far branches are handled by the next patch. This fixes CVE-2014-3647. Cc: stable@vger.kernel.org Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 October 2014, 11:21:16 UTC
05c83ec Nadav Amit 18 September 2014, 19:39:37 UTC KVM: x86: Fix wrong masking on relative jump/call Relative jumps and calls do the masking according to the operand size, and not according to the address size as the KVM emulator does today. This patch fixes KVM behavior. Cc: stable@vger.kernel.org Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 October 2014, 11:21:15 UTC
2febc83 Andy Honig 27 August 2014, 21:42:54 UTC KVM: x86: Improve thread safety in pit There's a race condition in the PIT emulation code in KVM. In __kvm_migrate_pit_timer the pit_timer object is accessed without synchronization. If the race condition occurs at the wrong time this can crash the host kernel. This fixes CVE-2014-3611. Cc: stable@vger.kernel.org Signed-off-by: Andrew Honig <ahonig@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 October 2014, 11:21:14 UTC
8b3c310 Andy Honig 27 August 2014, 18:16:44 UTC KVM: x86: Prevent host from panicking on shared MSR writes. The previous patch blocked invalid writes directly when the MSR is written. As a precaution, prevent future similar mistakes by gracefulling handle GPs caused by writes to shared MSRs. Cc: stable@vger.kernel.org Signed-off-by: Andrew Honig <ahonig@google.com> [Remove parts obsoleted by Nadav's patch. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 October 2014, 11:21:08 UTC
854e8bb Nadav Amit 16 September 2014, 00:24:05 UTC KVM: x86: Check non-canonical addresses upon WRMSR Upon WRMSR, the CPU should inject #GP if a non-canonical value (address) is written to certain MSRs. The behavior is "almost" identical for AMD and Intel (ignoring MSRs that are not implemented in either architecture since they would anyhow #GP). However, IA32_SYSENTER_ESP and IA32_SYSENTER_EIP cause #GP if non-canonical address is written on Intel but not on AMD (which ignores the top 32-bits). Accordingly, this patch injects a #GP on the MSRs which behave identically on Intel and AMD. To eliminate the differences between the architecutres, the value which is written to IA32_SYSENTER_ESP and IA32_SYSENTER_EIP is turned to canonical value before writing instead of injecting a #GP. Some references from Intel and AMD manuals: According to Intel SDM description of WRMSR instruction #GP is expected on WRMSR "If the source register contains a non-canonical address and ECX specifies one of the following MSRs: IA32_DS_AREA, IA32_FS_BASE, IA32_GS_BASE, IA32_KERNEL_GS_BASE, IA32_LSTAR, IA32_SYSENTER_EIP, IA32_SYSENTER_ESP." According to AMD manual instruction manual: LSTAR/CSTAR (SYSCALL): "The WRMSR instruction loads the target RIP into the LSTAR and CSTAR registers. If an RIP written by WRMSR is not in canonical form, a general-protection exception (#GP) occurs." IA32_GS_BASE and IA32_FS_BASE (WRFSBASE/WRGSBASE): "The address written to the base field must be in canonical form or a #GP fault will occur." IA32_KERNEL_GS_BASE (SWAPGS): "The address stored in the KernelGSbase MSR must be in canonical form." This patch fixes CVE-2014-3610. Cc: stable@vger.kernel.org Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 24 October 2014, 11:21:08 UTC
fb54a64 David Henningsson 24 October 2014, 08:00:38 UTC ALSA: hda - Add missing terminating entry to SND_HDA_PIN_QUIRK macro Without this terminating entry, the pin matching would continue across random memory until a zero or a non-matching entry was found. The result being that in some cases, the pin quirk would not be applied correctly. Cc: stable@vger.kernel.org Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 24 October 2014, 08:04:29 UTC
4fbc400 Olof Johansson 24 October 2014, 04:05:45 UTC Merge tag 'socfpga_fixes_for_3.18' of git://git.rocketboards.org/linux-socfpga-next into fixes Merge "SOCFPGA fixes for 3.18" from Dinh Nguyen: These patches fixes an SMP and SDMMC driver hang during boot up on the SOCFPGA platform. Patch "arm: socfpga: fix fetching cpu1start_addr for SMP" fixes the SMP trampoline code in order for CPU1 to correctly fetch it's cpu1start_addr. Patch "ARM: dts: socfpga: rename gpio nodes" renames that GPIO node in order to allow a standard way of specifying status="okay" in the board DTS file. Patch "ARM: dts: socfpga: Fix SD card detect" fixes a SDMMC driver hang during boot. The reason for the hang was the deferred probe of the SDMMC driver was waiting for the GPIO resource that would never come. Patch "ARM: dts: socfpga: Add a 3.3V fixed regulator node" adds a fixed regulator node for the SDMMC driver to use. * tag 'socfpga_fixes_for_3.18' of git://git.rocketboards.org/linux-socfpga-next: ARM: dts: socfpga: Add a 3.3V fixed regulator node ARM: dts: socfpga: Fix SD card detect ARM: dts: socfpga: rename gpio nodes arm: socfpga: fix fetching cpu1start_addr for SMP Signed-off-by: Olof Johansson <olof@lixom.net> 24 October 2014, 04:05:45 UTC
184f84d Olof Johansson 24 October 2014, 04:02:49 UTC Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Merge "at91: fixes for v3.18 #1" from Nicholas Ferre: First AT91 fixes for 3.18: - one more MAINTAINERS entry for the SSC driver - a fix for the newly introduced power/reset driver - a fix on at91sam9263 USB due to PLLB misconfiguration * tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: sam9263: fix PLLB frequencies power: reset: at91-reset: fix power down register MAINTAINERS: add atmel ssc driver maintainer entry Signed-off-by: Olof Johansson <olof@lixom.net> 24 October 2014, 04:02:49 UTC
bcd09f1 Olof Johansson 24 October 2014, 04:01:02 UTC Merge tag 'zynq-dt-fixes-for-3.18' of https://github.com/Xilinx/linux-xlnx into fixes Merge "Xilinx Zynq dt fixes for v3.18" from Michal Simek: arm: Xilinx Zynq DT fixes for v3.18 - Fix gem register size - Fix OPP - Add missing references - Trivial cleanup * tag 'zynq-dt-fixes-for-3.18' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: DT: trivial: Fix mc node ARM: zynq: DT: Add cadence watchdog node ARM: zynq: DT: Add missing reference for memory-controller ARM: zynq: DT: Add missing reference for ADC ARM: zynq: DT: Add missing address for L2 pl310 ARM: zynq: DT: Remove 222 MHz OPP ARM: zynq: DT: Fix GEM register area size Signed-off-by: Olof Johansson <olof@lixom.net> 24 October 2014, 04:01:02 UTC
90f0845 Olof Johansson 20 October 2014, 07:18:50 UTC ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP Allows booting from SD/MMC on RK3288 and other platforms. Added here so I can enable the board in the boot farm. Signed-off-by: Olof Johansson <olof@lixom.net> 24 October 2014, 04:00:52 UTC
3e10dcc Olof Johansson 19 October 2014, 21:29:14 UTC ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE I missed in 9a2ad529ed26 that REGULATOR_FIXED_VOLTAGE had also gotten deselected, so it needs to be added back as an explicit option. Signed-off-by: Olof Johansson <olof@lixom.net> 24 October 2014, 04:00:52 UTC
1be47b3 Al Viro 24 October 2014, 02:52:55 UTC Merge branch 'overlayfs.v25' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into for-linus 24 October 2014, 02:52:55 UTC
51486b9 Al Viro 23 October 2014, 17:26:21 UTC fix inode leaks on d_splice_alias() failure exits d_splice_alias() callers expect it to either stash the inode reference into a new alias, or drop the inode reference. That makes it possible to just return d_splice_alias() result from ->lookup() instance, without any extra housekeeping required. Unfortunately, that should include the failure exits. If d_splice_alias() returns an error, it leaves the dentry it has been given negative and thus it *must* drop the inode reference. Easily fixed, but it goes way back and will need backporting. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 24 October 2014, 02:30:18 UTC
aedd153 Markos Chandras 20 October 2014, 08:39:31 UTC MIPS: ftrace: Fix a microMIPS build problem Code before the .fixup section needs to have the .insn directive. This has no side effects on MIPS32/64 but it affects the way microMIPS loads the address for the return label. Fixes the following build problem: mips-linux-gnu-ld: arch/mips/built-in.o: .fixup+0x4a0: Unsupported jump between ISA modes; consider recompiling with interlinking enabled. mips-linux-gnu-ld: final link failed: Bad value Makefile:819: recipe for target 'vmlinux' failed The fix is similar to 1658f914ff91c3bf ("MIPS: microMIPS: Disable LL/SC and fix linker bug.") Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8117/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 24 October 2014, 00:38:33 UTC
6fa88d9 Stefan Hengelein 19 October 2014, 18:04:26 UTC MIPS: MSP71xx: Fix build error When CONFIG_MIPS_MT_SMP is enabled, the following compilation error occurs: arch/mips/pmcs-msp71xx/msp_irq_cic.c:134: error: ‘irq’ undeclared This code clearly never saw a compiler. The surrounding code suggests, that 'd->irq' was intended, not 'irq'. This error was found with vampyr. Signed-off-by: Stefan Hengelein <stefan.hengelein@fau.de> Fixes: d7881fbdf866d7d0 ("MIPS: msp71xx: Convert to new irq_chip functions") Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8116/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 24 October 2014, 00:37:18 UTC
69c433e Miklos Szeredi 23 October 2014, 22:14:39 UTC fs: limit filesystem stacking depth Add a simple read-only counter to super_block that indicates how deep this is in the stack of filesystems. Previously ecryptfs was the only stackable filesystem and it explicitly disallowed multiple layers of itself. Overlayfs, however, can be stacked recursively and also may be stacked on top of ecryptfs or vice versa. To limit the kernel stack usage we must limit the depth of the filesystem stack. Initially the limit is set to 2. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> 23 October 2014, 22:14:39 UTC
7c37fbd Neil Brown 23 October 2014, 22:14:39 UTC overlay: overlay filesystem documentation Document the overlay filesystem. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> 23 October 2014, 22:14:39 UTC
f45827e Erez Zadok 23 October 2014, 22:14:38 UTC overlayfs: implement show_options This is useful because of the stacking nature of overlayfs. Users like to find out (via /proc/mounts) which lower/upper directory were used at mount time. AV: even failing ovl_parse_opt() could've done some kstrdup() AV: failure of ovl_alloc_entry() should end up with ENOMEM, not EINVAL Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> 23 October 2014, 22:14:38 UTC
cc25963 Andy Whitcroft 23 October 2014, 22:14:38 UTC overlayfs: add statfs support Add support for statfs to the overlayfs filesystem. As the upper layer is the target of all write operations assume that the space in that filesystem is the space in the overlayfs. There will be some inaccuracy as overwriting a file will copy it up and consume space we were not expecting, but it is better than nothing. Use the upper layer dentry and mount from the overlayfs root inode, passing the statfs call to that filesystem. Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> 23 October 2014, 22:14:38 UTC
e9be9d5 Miklos Szeredi 23 October 2014, 22:14:38 UTC overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> 23 October 2014, 22:14:38 UTC
46fdb79 Miklos Szeredi 23 October 2014, 22:14:37 UTC shmem: support RENAME_WHITEOUT Allocate a dentry, initialize it with a whiteout and hash it in the place of the old dentry. Later the old dentry will be moved away and the whiteout will remain. i_mutex protects agains concurrent readdir. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Hugh Dickins <hughd@google.com> 23 October 2014, 22:14:37 UTC
cd808de Miklos Szeredi 23 October 2014, 22:14:37 UTC ext4: support RENAME_WHITEOUT Add whiteout support to ext4_rename(). A whiteout inode (chrdev/0,0) is created before the rename takes place. The whiteout inode is added to the old entry instead of deleting it. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> 23 October 2014, 22:14:37 UTC
0d7a855 Miklos Szeredi 23 October 2014, 22:14:37 UTC vfs: add RENAME_WHITEOUT This adds a new RENAME_WHITEOUT flag. This flag makes rename() create a whiteout of source. The whiteout creation is atomic relative to the rename. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> 23 October 2014, 22:14:37 UTC
787fb6b Miklos Szeredi 23 October 2014, 22:14:36 UTC vfs: add whiteout support Whiteout isn't actually a new file type, but is represented as a char device (Linus's idea) with 0/0 device number. This has several advantages compared to introducing a new whiteout file type: - no userspace API changes (e.g. trivial to make backups of upper layer filesystem, without losing whiteouts) - no fs image format changes (you can boot an old kernel/fsck without whiteout support and things won't break) - implementation is trivial Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> 23 October 2014, 22:14:36 UTC
cbdf35b Miklos Szeredi 23 October 2014, 22:14:36 UTC vfs: export check_sticky() It's already duplicated in btrfs and about to be used in overlayfs too. Move the sticky bit check to an inline helper and call the out-of-line helper only in the unlikly case of the sticky bit being set. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> 23 October 2014, 22:14:36 UTC
c771d68 Miklos Szeredi 23 October 2014, 22:14:36 UTC vfs: introduce clone_private_mount() Overlayfs needs a private clone of the mount, so create a function for this and export to modules. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> 23 October 2014, 22:14:36 UTC
bd5d085 Miklos Szeredi 23 October 2014, 22:14:35 UTC vfs: export __inode_permission() to modules We need to be able to check inode permissions (but not filesystem implied permissions) for stackable filesystems. Expose this interface for overlayfs. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> 23 October 2014, 22:14:35 UTC
1c11859 Miklos Szeredi 23 October 2014, 22:14:35 UTC vfs: export do_splice_direct() to modules Export do_splice_direct() to modules. Needed by overlay filesystem. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> 23 October 2014, 22:14:35 UTC
4aa7c63 Miklos Szeredi 23 October 2014, 22:14:35 UTC vfs: add i_op->dentry_open() Add a new inode operation i_op->dentry_open(). This is for stacked filesystems that want to return a struct file from a different filesystem. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> 23 October 2014, 22:14:35 UTC
816fb41 Linus Torvalds 23 October 2014, 22:04:27 UTC Merge tag 'remove-weak-declarations' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull weak function declaration removal from Bjorn Helgaas: "The "weak" attribute is commonly used for the default version of a function, where an architecture can override it by providing a strong version. Some header file declarations included the "weak" attribute. That's error-prone because it causes every implementation to be weak, with no strong version at all, and the linker chooses one based on link order. What we want is the "weak" attribute only on the *definition* of the default implementation. These changes remove "weak" from the declarations, leaving it on the default definitions" * tag 'remove-weak-declarations' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: uprobes: Remove "weak" from function declarations memory-hotplug: Remove "weak" from memory_block_size_bytes() declaration kgdb: Remove "weak" from kgdb_arch_pc() declaration ARC: kgdb: generic kgdb_arch_pc() suffices vmcore: Remove "weak" from function declarations clocksource: Remove "weak" from clocksource_default_clock() declaration x86, intel-mid: Remove "weak" from function declarations audit: Remove "weak" from audit_classify_compat_syscall() declaration 23 October 2014, 22:04:27 UTC
8c81f48 Linus Torvalds 23 October 2014, 21:45:09 UTC Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 EFI updates from Peter Anvin: "This patchset falls under the "maintainers that grovel" clause in the v3.18-rc1 announcement. We had intended to push it late in the merge window since we got it into the -tip tree relatively late. Many of these are relatively simple things, but there are a couple of key bits, especially Ard's and Matt's patches" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) rtc: Disable EFI rtc for x86 efi: rtc-efi: Export platform:rtc-efi as module alias efi: Delete the in_nmi() conditional runtime locking efi: Provide a non-blocking SetVariable() operation x86/efi: Adding efi_printks on memory allocationa and pci.reads x86/efi: Mark initialization code as such x86/efi: Update comment regarding required phys mapped EFI services x86/efi: Unexport add_efi_memmap variable x86/efi: Remove unused efi_call* macros efi: Resolve some shadow warnings arm64: efi: Format EFI memory type & attrs with efi_md_typeattr_format() ia64: efi: Format EFI memory type & attrs with efi_md_typeattr_format() x86: efi: Format EFI memory type & attrs with efi_md_typeattr_format() efi: Introduce efi_md_typeattr_format() efi: Add macro for EFI_MEMORY_UCE memory attribute x86/efi: Clear EFI_RUNTIME_SERVICES if failing to enter virtual mode arm64/efi: Do not enter virtual mode if booting with efi=noruntime or noefi arm64/efi: uefi_init error handling fix efi: Add kernel param efi=noruntime lib: Add a generic cmdline parse function parse_option_str ... 23 October 2014, 21:45:09 UTC
a91e99e Rafael J. Wysocki 23 October 2014, 21:03:20 UTC Merge branches 'pm-cpuidle' and 'pm-cpufreq' * pm-cpuidle: cpuidle: powernv: Populate cpuidle state details by querying the device-tree * pm-cpufreq: intel_pstate: Correct BYT VID values. intel_pstate: Fix BYT frequency reporting intel_pstate: Don't lose sysfs settings during cpu offline cpufreq: intel_pstate: Reflect current no_turbo state correctly cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy cpufreq: cpufreq-dt: adjust message related to regulators cpufreq: cpufreq-dt: extend with platform_data cpufreq: allow driver-specific data 23 October 2014, 21:03:20 UTC
49fe035 Rafael J. Wysocki 23 October 2014, 21:02:58 UTC Merge branches 'acpi-pm' and 'pm-genirq' * acpi-pm: ACPI: invoke acpi_device_wakeup() with correct parameters * pm-genirq: PCI / PM: handle failure to enable wakeup on PCIe PME 23 October 2014, 21:02:58 UTC
96ed753 Rafael J. Wysocki 23 October 2014, 21:02:45 UTC Merge branch 'freezer' * freezer: PM / freezer: Clean up code after recent fixes PM: convert do_each_thread to for_each_process_thread OOM, PM: OOM killed task shouldn't escape PM suspend freezer: remove obsolete comments in __thaw_task() freezer: Do not freeze tasks killed by OOM killer 23 October 2014, 21:02:45 UTC
37c72ca Rafael J. Wysocki 23 October 2014, 21:02:36 UTC Merge branch 'pm-qos' * pm-qos: PM / QoS: Add PM_QOS_MEMORY_BANDWIDTH class 23 October 2014, 21:02:36 UTC
286180d Rafael J. Wysocki 23 October 2014, 21:02:09 UTC Merge branches 'acpi-ec' and 'acpi-platform' * acpi-ec: ACPI / EC: Cleanup coding style. ACPI / EC: Refine event/query debugging messages. ACPI / EC: Add detailed command/query debugging information. ACPI / EC: Enhance the logs to apply to QR_EC transactions. ACPI / EC: Add CPU ID to debugging messages. * acpi-platform: ACPI / platform: provide default DMA mask 23 October 2014, 21:02:09 UTC
d022a65 Dirk Brandewie 13 October 2014, 15:37:44 UTC intel_pstate: Correct BYT VID values. Using a VID value that is not high enough for the requested P state can cause machine checks. Add a ceiling function to ensure calulated VIDs with fractional values are set to the next highest integer VID value. The algorythm for calculating the non-trubo VID from the BIOS writers guide is: vid_ratio = (vid_max - vid_min) / (max_pstate - min_pstate) vid = ceiling(vid_min + (req_pstate - min_pstate) * vid_ratio) Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 23 October 2014, 21:00:00 UTC
b27580b Dirk Brandewie 13 October 2014, 15:37:43 UTC intel_pstate: Fix BYT frequency reporting BYT has a different conversion from P state to frequency than the core processors. This causes the min/max and current frequency to be misreported on some BYT SKUs. Tested on BYT N2820, Ivybridge and Haswell processors. Link: https://bugzilla.yoctoproject.org/show_bug.cgi?id=6663 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 23 October 2014, 20:59:59 UTC
c034871 Dirk Brandewie 13 October 2014, 15:37:42 UTC intel_pstate: Don't lose sysfs settings during cpu offline The user may have custom settings don't destroy them during suspend. Link: https://bugzilla.kernel.org/show_bug.cgi?id=80651 Reported-by: Tobias Jakobi <liquid.acid@gmx.net> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 23 October 2014, 20:59:59 UTC
4521e1a Gabriele Mazzotta 13 October 2014, 15:37:41 UTC cpufreq: intel_pstate: Reflect current no_turbo state correctly Some BIOSes modify the state of MSR_IA32_MISC_ENABLE_TURBO_DISABLE based on the current power source for the system battery AC vs battery. Reflect the correct current state and ability to modify the no_turbo sysfs file based on current state of MSR_IA32_MISC_ENABLE_TURBO_DISABLE. Link: https://bugzilla.kernel.org/show_bug.cgi?id=83151 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 23 October 2014, 20:59:59 UTC
c034b02 Dirk Brandewie 13 October 2014, 15:37:40 UTC cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers Currently the core does not expose scaling_cur_freq for set_policy() drivers this breaks some userspace monitoring tools. Change the core to expose this file for all drivers and if the set_policy() driver supports the get() callback use it to retrieve the current frequency. Link: https://bugzilla.kernel.org/show_bug.cgi?id=73741 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 23 October 2014, 20:59:59 UTC
36b4bed Pali Rohár 15 October 2014, 23:16:51 UTC cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy Code which changes policy to powersave changes also max_policy_pct based on max_freq. Code which change max_perf_pct has upper limit base on value max_policy_pct. When policy is changing from powersave back to performance then max_policy_pct is not changed. Which means that changing max_perf_pct is not possible to high values if max_freq was too low in powersave policy. Test case: $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq 800000 $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 3300000 $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor performance $ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct 100 $ echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor $ echo 800000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq $ echo 20 > /sys/devices/system/cpu/intel_pstate/max_perf_pct $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor powersave $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 800000 $ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct 20 $ echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor $ echo 3300000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq $ echo 100 > /sys/devices/system/cpu/intel_pstate/max_perf_pct $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor performance $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq 3300000 $ cat /sys/devices/system/cpu/intel_pstate/max_perf_pct 24 And now intel_pstate driver allows to set maximal value for max_perf_pct based on max_policy_pct which is 24 for previous powersave max_freq 800000. This patch will set default value for max_policy_pct when setting policy to performance so it will allow to set also max value for max_perf_pct. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Cc: All applicable <stable@vger.kernel.org> Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 23 October 2014, 20:59:59 UTC
5de551e Linus Torvalds 23 October 2014, 20:56:24 UTC Merge tag 'hwmon-for-linus-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull a hwmon fix from Guenter Roeck: "Fix potential compile problem for menf21bmc hwmon driver" * tag 'hwmon-for-linus-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (menf21bmc) Include linux/err.h 23 October 2014, 20:56:24 UTC
5dfd7f9 Lucas Stach 22 October 2014, 12:31:55 UTC PCI / PM: handle failure to enable wakeup on PCIe PME If the irqchip handling the PCIe PME interrupt is not able to enable interrupt wakeup we should properly reflect this in the PME suspend status. This fixes a kernel warning on resume, where it would try to disable the irq wakeup that failed to be activated while suspending, for example: WARNING: CPU: 0 PID: 609 at kernel/irq/manage.c:536 irq_set_irq_wake+0xc0/0xf8() Unbalanced IRQ 384 wake disable Fixes: 76cde7e49590 (PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle) Reported-and-tested-by: Richard Zhu <richard.zhu@freescale.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 23 October 2014, 20:47:28 UTC
67598a1 Zhang Rui 23 October 2014, 12:20:00 UTC ACPI: invoke acpi_device_wakeup() with correct parameters Fix a bug that invokes acpi_device_wakeup() with wrong parameters. Fixes: f35cec255557 (ACPI / PM: Always enable wakeup GPEs when enabling device wakeup) Signed-off-by: Zhang Rui <rui.zhang@intel.com> Cc: 3.17+ <stable@vger.kernel.org> # 3.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 23 October 2014, 20:03:19 UTC
eb0c5ff Linus Torvalds 23 October 2014, 19:44:59 UTC Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Intel, nouveau, radeon and qxl. Mostly for bugs introduced in the merge window, nothing too shocking" [ And one cirrus fix added later and not mentioned in the pull request.. - Linus ] * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/cirrus: bind also to qemu-xen-traditional qxl: don't create too large primary surface drm/nouveau: fix regression on agp boards drm/gt215/gr: fix initialisation on gddr5 boards drm/radeon: reduce sparse false positive warnings drm/radeon: fix vm page table block size calculation drm/ttm: Don't evict BOs outside of the requested placement range drm/ttm: Don't skip fpfn check if lpfn is 0 in ttm_bo_mem_compat drm/radeon: use gart memory for DMA ring tests drm/radeon: fix speaker allocation setup drm/radeon: initialize sadb to NULL in the audio code drm/i915: fix short vs. long hpd detection drm/i915: Don't trust the DP_DETECT bit for eDP ports on CHV Revert "drm/radeon/dpm: drop clk/voltage dependency filters for SI" Revert "drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table" drm/i915: properly reenable gen8 pipe IRQs drm/i915: Move DIV_ROUND_CLOSEST_ULL macro to header drm/i915: intel_backlight scale() math WA 23 October 2014, 19:44:59 UTC
5e9e3a5 Markos Chandras 09 October 2014, 09:34:19 UTC MIPS: Malta: Do not build the malta-amon.c file if CMP is not enabled The malta-amon.c file provides functions to access the YAMON Monitoring interface to bring up secondary VPEs in case of SMP/CMP. As a result of which, there is no need to build it if CMP is not used. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/7993/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 23 October 2014, 18:05:55 UTC
b89f306 Paul Burton 25 September 2014, 09:26:15 UTC MIPS: Prevent compiler warning from cop2_{save,restore} The no-op cases of cop2_save & cop2_restore lead to the following warnings being emitted during build with recent versions of gcc (tested using gcc 4.8.3 from the Mentor Sourcery CodeBench 2014.05 toolchain): In file included from ./arch/mips/include/asm/switch_to.h:18:0, from kernel/sched/core.c:78: kernel/sched/core.c: In function 'finish_task_switch': include/asm-generic/current.h:6:45: warning: value computed is not used [-Wunused-value] #define get_current() (current_thread_info()->task) ^ ./arch/mips/include/asm/cop2.h:48:32: note: in definition of macro 'cop2_restore' #define cop2_restore(r) do { (r); } while (0) ^ include/asm-generic/current.h:7:17: note: in expansion of macro 'get_current' #define current get_current() ^ ./arch/mips/include/asm/switch_to.h:114:16: note: in expansion of macro 'current' cop2_restore(current); \ ^ kernel/sched/core.c:2225:2: note: in expansion of macro 'finish_arch_switch' finish_arch_switch(prev); ^ Avoid the warning by "using" the value by casting to void. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7880/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 23 October 2014, 17:58:13 UTC
39a5959 Markos Chandras 18 September 2014, 15:09:49 UTC MIPS: Kconfig: Add missing MIPS_CPS dependencies to PM and cpuidle The MIPS_CPS_PM and MIPS_CPS_CPUIDLE implementation should depend on the MIPS_CPS symbol to avoid the following build problem arch/mips/kernel/pm-cps.c: In function 'cps_pm_enter_state': arch/mips/kernel/pm-cps.c:164:26: error: 'cpu_coherent_mask' undeclared (first use in this function) cpumask_clear_cpu(cpu, &cpu_coherent_mask); ^ Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/7798/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 23 October 2014, 17:58:05 UTC
9d26024 Markos Chandras 16 September 2014, 12:57:08 UTC MIPS: idle: Remove leftover __pastwait symbol and its references The __pastwait symbol was only used by the address_is_in_r4k_wait_irqoff function but this is no longer used since the SMTC removal in commit b633648c5ad3 ('MIPS: MT: Remove SMTC support'). That symbol also led to build failures under certain random configuration due to the way the compiler compiled the r4k_wait_irqoff function. If that function was called multiple times, the __pastwait symbol was redefined breaking the build like this: CHK include/generated/compile.h CC arch/mips/kernel/idle.o {standard input}: Assembler messages: {standard input}:527: Error: symbol `__pastwait' is already defined Link: http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=1244879922.24479.30.camel%40falcon Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/7791/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 23 October 2014, 17:24:05 UTC
486edb2 Boris Ostrovsky 04 August 2014, 22:17:23 UTC xen/pci: Allocate memory for physdev_pci_device_add's optarr physdev_pci_device_add's optarr[] is a zero-sized array and therefore reference to add.optarr[0] is accessing memory that does not belong to the 'add' variable. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2014, 15:24:02 UTC
1ea644c Martin Kelly 17 October 2014, 03:48:11 UTC x86/xen: panic on bad Xen-provided memory map Panic if Xen provides a memory map with 0 entries. Although this is unlikely, it is better to catch the error at the point of seeing the map than later on as a symptom of some other crash. Signed-off-by: Martin Kelly <martkell@amazon.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2014, 15:24:02 UTC
3251f20 Boris Ostrovsky 16 October 2014, 21:02:15 UTC x86/xen: Fix incorrect per_cpu accessor in xen_clocksource_read() Commit 89cbc76768c2 ("x86: Replace __get_cpu_var uses") replaced __get_cpu_var() with this_cpu_ptr() in xen_clocksource_read() in such a way that instead of accessing a structure pointed to by a per-cpu pointer we are trying to get to a per-cpu structure. __this_cpu_read() of the pointer is the more appropriate accessor. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2014, 15:24:02 UTC
3a0e94f Juergen Gross 17 October 2014, 11:16:06 UTC x86/xen: avoid race in p2m handling When a new p2m leaf is allocated this leaf is linked into the p2m tree via cmpxchg. Unfortunately the compare value for checking the success of the update is read after checking for the need of a new leaf. It is possible that a new leaf has been linked into the tree concurrently in between. This could lead to a leaked memory page and to the loss of some p2m entries. Avoid the race by using the read compare value for checking the need of a new p2m leaf and use ACCESS_ONCE() to get it. There are other places which seem to need ACCESS_ONCE() to ensure proper operation. Change them accordingly. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2014, 15:24:02 UTC
2c18568 Juergen Gross 14 October 2014, 11:33:46 UTC x86/xen: delay construction of mfn_list_list The 3 level p2m tree for the Xen tools is constructed very early at boot by calling xen_build_mfn_list_list(). Memory needed for this tree is allocated via extend_brk(). As this tree (other than the kernel internal p2m tree) is only needed for domain save/restore, live migration and crash dump analysis it doesn't matter whether it is constructed very early or just some milliseconds later when memory allocation is possible by other means. This patch moves the call of xen_build_mfn_list_list() just after calling xen_pagetable_p2m_copy() simplifying this function, too, as it doesn't have to bother with two parallel trees now. The same applies for some other internal functions. While simplifying code, make early_can_reuse_p2m_middle() static and drop the unused second parameter. p2m_mid_identity_mfn can be removed as well, it isn't used either. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2014, 15:24:02 UTC
239af7c Juergen Gross 14 October 2014, 09:00:18 UTC x86/xen: avoid writing to freed memory after race in p2m handling In case a race was detected during allocation of a new p2m tree element in alloc_p2m() the new allocated mid_mfn page is freed without updating the pointer to the found value in the tree. This will result in overwriting the just freed page with the mfn of the p2m leaf. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2014, 15:24:01 UTC
fd8b795 Boris Ostrovsky 07 October 2014, 21:00:07 UTC xen/balloon: Don't continue ballooning when BP_ECANCELED is encountered Commit 3dcf63677d4e ("xen/balloon: cancel ballooning if adding new memory failed") makes reserve_additional_memory() return BP_ECANCELED when an error is encountered. This error, however, is ignored by the caller (balloon_process()) since it is overwritten by subsequent call to update_schedule(). This results in continuous attempts to add more memory, all of which are likely to fail again. We should stop trying to schedule next iteration of ballooning when the current one has failed. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> 23 October 2014, 15:24:01 UTC
3d1f9dd Markos Chandras 17 October 2014, 09:49:38 UTC MIPS: Sibyte: Include the swarm subdir to the sb1250 LittleSur builds Fixes the following randconfig build problem: arch/mips/built-in.o: In function `show_cpuinfo': proc.c:(.text+0xde84): undefined reference to `get_system_type' arch/mips/built-in.o: In function `sb1250_setup': (.init.text+0x428): undefined reference to `get_system_type' arch/mips/built-in.o: In function `setup_arch': (.init.text+0x178c): undefined reference to `plat_mem_setup' Makefile:930: recipe for target 'vmlinux' failed Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8106/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 23 October 2014, 11:52:49 UTC
cdb685a Aaro Koskinen 13 October 2014, 21:42:08 UTC MIPS: ptrace.h: Add a missing include Commit a79ebea62010 (MIPS: ptrace: Fix user pt_regs definition, use in ptrace_{get, set}regs()) converted struct pt_regs to use __u64. Some userspace applications (e.g. GDB) include this file directly, and fail to see this type. Fix by including <linux/types.h>. The patch fixes the following build failure with GDB 7.8 when using GLIBC headers created against Linux 3.17: In file included from /home/aaro/los/work/shared/gdb-7.8/gdb/mips-linux-nat.c:37:0: /home/aaro/los/work/mips/rootfs/mips-linux-gnu/usr/include/asm/ptrace.h:32:2: error: unknown type name '__u64' __u64 regs[32]; ^ /home/aaro/los/work/mips/rootfs/mips-linux-gnu/usr/include/asm/ptrace.h:35:2: error: unknown type name '__u64' __u64 lo; ^ /home/aaro/los/work/mips/rootfs/mips-linux-gnu/usr/include/asm/ptrace.h:36:2: error: unknown type name '__u64' __u64 hi; ^ Fixes: a79ebea62010 ("MIPS: ptrace: Fix user pt_regs definition, use in ptrace_{get, set}regs()") Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8067/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 23 October 2014, 11:23:08 UTC
c0c3e73 Olaf Hering 11 April 2014, 06:56:23 UTC drm/cirrus: bind also to qemu-xen-traditional qemu as used by xend/xm toolstack uses a different subvendor id. Bind the drm driver also to this emulated card. Signed-off-by: Olaf Hering <olaf@aepfle.de> cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 23 October 2014, 04:09:04 UTC
efb4a44 Dinh Nguyen 16 October 2014, 19:43:53 UTC ARM: dts: socfpga: Add a 3.3V fixed regulator node Without the 3.3V regulator node, the SDMMC driver will give these warnings: dw_mmc ff704000.dwmmc0: No vmmc regulator found dw_mmc ff704000.dwmmc0: No vqmmc regulator found This patch adds the regulator node, and points the SD/MMC to the regulator. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Reviewed-by: Doug Anderson <dianders@chromium.org> --- v3: Rename nodes to have schematic-name_regulator and remove "boot-on" and "always-on" v2: Move the regulator nodes to their respective board dts file and correctly rename them to match the schematic 23 October 2014, 02:00:19 UTC
23920c0 Dinh Nguyen 16 October 2014, 19:54:51 UTC ARM: dts: socfpga: Fix SD card detect Without this patch, the booting the SOCFPGA platform would hang at the SDMMC driver loading. The issue, debugged by Doug Anderson, turned out to be that the GPIO bank used by the SD card-detect was not set to status="okay". Also update the cd-gpios to point to portb of the &gpio1 GPIO IP. Suggested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> --- v4: Use &gpio1 to set status="okay" and update cd-gpio=&portb v3: Correctly degugged the issue to be a gpio node not having status="okay" 23 October 2014, 01:59:45 UTC
d11ac1d Dinh Nguyen 22 October 2014, 18:00:42 UTC ARM: dts: socfpga: rename gpio nodes Since the Synopsys GPIO IP can support multiple ports of varying widths, it would make more sense to have the GPIO node DTS entry as this: gpio0: gpio@ff708000{ porta{ }; }; Also, this is documented in the snps-dwapb-gpio.txt. Suggested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> 23 October 2014, 01:59:07 UTC
271a9c3 Bjorn Helgaas 14 October 2014, 01:01:03 UTC uprobes: Remove "weak" from function declarations For the following interfaces: set_swbp() set_orig_insn() is_swbp_insn() is_trap_insn() uprobe_get_swbp_addr() arch_uprobe_ignore() arch_uprobe_copy_ixol() kernel/events/uprobes.c provides default definitions explicitly marked "weak". Some architectures provide their own definitions intended to override the defaults, but the "weak" attribute on the declarations applied to the arch definitions as well, so the linker chose one based on link order (see 10629d711ed7 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). Remove the "weak" attribute from the declarations so we always prefer a non-weak definition over the weak one, independent of link order. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> CC: Victor Kamensky <victor.kamensky@linaro.org> CC: Oleg Nesterov <oleg@redhat.com> CC: David A. Long <dave.long@linaro.org> CC: Ananth N Mavinakayanahalli <ananth@in.ibm.com> 22 October 2014, 22:14:04 UTC
e0a8400 Bjorn Helgaas 14 October 2014, 01:00:47 UTC memory-hotplug: Remove "weak" from memory_block_size_bytes() declaration drivers/base/memory.c provides a default memory_block_size_bytes() definition explicitly marked "weak". Several architectures provide their own definitions intended to override the default, but the "weak" attribute on the declaration applied to the arch definitions as well, so the linker chose one based on link order (see 10629d711ed7 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). Remove the "weak" attribute from the declaration so we always prefer a non-weak definition over the weak one, independent of link order. Fixes: 41f107266b19 ("drivers: base: Add prototype declaration to the header file") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> CC: Rashika Kheria <rashika.kheria@gmail.com> CC: Nathan Fontenot <nfont@austin.ibm.com> CC: Anton Blanchard <anton@au1.ibm.com> CC: Heiko Carstens <heiko.carstens@de.ibm.com> CC: Yinghai Lu <yinghai@kernel.org> 22 October 2014, 22:14:04 UTC
back to top