Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
1f2ef04 Kai-Heng Feng 16 April 2020, 06:35:40 UTC ahci: Add Intel Comet Lake PCH-U PCI ID Add Intel Comet Lake PCH-U PCI ID to the list of supported controllers. Set default SATA LPM so the SoC can enter S0ix. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 16 April 2020, 16:26:52 UTC
f0f7a67 Darrick J. Wong 12 April 2020, 20:11:10 UTC xfs: move inode flush to the sync workqueue Move the inode dirty data flushing to a workqueue so that multiple threads can take advantage of a single thread's flushing work. The ratelimiting technique used in bdd4ee4 was not successful, because threads that skipped the inode flush scan due to ratelimiting would ENOSPC early, which caused occasional (but noticeable) changes in behavior and sporadic fstest regressions. Therefore, make all the writer threads wait on a single inode flush, which eliminates both the stampeding hordes of flushers and the small window in which a write could fail with ENOSPC because it lost the ratelimit race after even another thread freed space. Fixes: c6425702f21e ("xfs: ratelimit inode flush on buffered write ENOSPC") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> 16 April 2020, 16:07:42 UTC
5fe56de John Garry 16 April 2020, 11:18:51 UTC blk-mq: Put driver tag in blk_mq_dispatch_rq_list() when no budget If in blk_mq_dispatch_rq_list() we find no budget, then we break of the dispatch loop, but the request may keep the driver tag, evaulated in 'nxt' in the previous loop iteration. Fix by putting the driver tag for that request. Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 16 April 2020, 15:27:03 UTC
94d440d Andrei Vagin 11 April 2020, 15:40:31 UTC proc, time/namespace: Show clock symbolic names in /proc/pid/timens_offsets Michael Kerrisk suggested to replace numeric clock IDs with symbolic names. Now the content of these files looks like this: $ cat /proc/774/timens_offsets monotonic 864000 0 boottime 1728000 0 For setting offsets, both representations of clocks (numeric and symbolic) can be used. As for compatibility, it is acceptable to change things as long as userspace doesn't care. The format of timens_offsets files is very new and there are no userspace tools yet which rely on this format. But three projects crun, util-linux and criu rely on the interface of setting time offsets and this is why it's required to continue supporting the numeric clock IDs on write. Fixes: 04a8682a71be ("fs/proc: Introduce /proc/pid/timens_offsets") Suggested-by: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20200411154031.642557-1-avagin@gmail.com 16 April 2020, 10:10:54 UTC
4b2dfe1 Marc Zyngier 10 April 2020, 11:11:39 UTC irqchip/gic-v4.1: Update effective affinity of virtual SGIs Although the vSGIs are not directly visible to the host, they still get moved around by the CPU hotplug, for example. This results in the kernel moaning on the console, such as: genirq: irq_chip GICv4.1-sgi did not update eff. affinity mask of irq 38 Updating the effective affinity on set_affinity() fixes it. Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> 16 April 2020, 09:28:34 UTC
9680622 Marc Zyngier 10 April 2020, 10:13:26 UTC irqchip/gic-v4.1: Add support for VPENDBASER's Dirty+Valid signaling When a vPE is made resident, the GIC starts parsing the virtual pending table to deliver pending interrupts. This takes place asynchronously, and can at times take a long while. Long enough that the vcpu enters the guest and hits WFI before any interrupt has been signaled yet. The vcpu then exits, blocks, and now gets a doorbell. Rince, repeat. In order to avoid the above, a (optional on GICv4, mandatory on v4.1) feature allows the GIC to feedback to the hypervisor whether it is done parsing the VPT by clearing the GICR_VPENDBASER.Dirty bit. The hypervisor can then wait until the GIC is ready before actually running the vPE. Plug the detection code as well as polling on vPE schedule. While at it, tidy-up the kernel message that displays the GICv4 optional features. Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> 16 April 2020, 09:28:12 UTC
cd09433 Ingo Molnar 16 April 2020, 08:21:31 UTC Merge tag 'perf-urgent-for-mingo-5.7-20200414' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: perf stat: Jin Yao: - Fix no metric header if --per-socket and --metric-only set build system: - Fix python building when built with clang, that was failing if the clang version doesn't support -fno-semantic-interposition. tools UAPI headers: Arnaldo Carvalho de Melo: - Update various copies of kernel headers, some ended up automatically updating build-time generated tables to enable tools such as 'perf trace' to decode syscalls and tracepoints arguments. Now the tools/perf build is free of UAPI drift warnings. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> 16 April 2020, 08:21:31 UTC
4da858c Dave Airlie 16 April 2020, 05:39:50 UTC Merge branch 'linux-5.7' of git://github.com/skeggsb/linux into drm-fixes Add missing module firmware for turings. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv4njTRpiNqOC54iRjpd=nu3pBG8i_fp8o_dp7AZE6hFWA@mail.gmail.com 16 April 2020, 05:40:02 UTC
92f673a Ben Skeggs 16 April 2020, 05:26:01 UTC drm/nouveau/sec2/gv100-: add missing MODULE_FIRMWARE() ASB was failing to load on Turing GPUs when firmware is being loaded from initramfs, leaving the GPU in an odd state and causing suspend/ resume to fail. Add missing MODULE_FIRMWARE() lines for initramfs generators. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: <stable@vger.kernel.org> # 5.6 16 April 2020, 05:34:12 UTC
4fa3b1c Eric W. Biederman 15 April 2020, 17:37:27 UTC proc: Handle umounts cleanly syzbot writes: > KASAN: use-after-free Read in dput (2) > > proc_fill_super: allocate dentry failed > ================================================================== > BUG: KASAN: use-after-free in fast_dput fs/dcache.c:727 [inline] > BUG: KASAN: use-after-free in dput+0x53e/0xdf0 fs/dcache.c:846 > Read of size 4 at addr ffff88808a618cf0 by task syz-executor.0/8426 > > CPU: 0 PID: 8426 Comm: syz-executor.0 Not tainted 5.6.0-next-20200412-syzkaller #0 > Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 > Call Trace: > __dump_stack lib/dump_stack.c:77 [inline] > dump_stack+0x188/0x20d lib/dump_stack.c:118 > print_address_description.constprop.0.cold+0xd3/0x315 mm/kasan/report.c:382 > __kasan_report.cold+0x35/0x4d mm/kasan/report.c:511 > kasan_report+0x33/0x50 mm/kasan/common.c:625 > fast_dput fs/dcache.c:727 [inline] > dput+0x53e/0xdf0 fs/dcache.c:846 > proc_kill_sb+0x73/0xf0 fs/proc/root.c:195 > deactivate_locked_super+0x8c/0xf0 fs/super.c:335 > vfs_get_super+0x258/0x2d0 fs/super.c:1212 > vfs_get_tree+0x89/0x2f0 fs/super.c:1547 > do_new_mount fs/namespace.c:2813 [inline] > do_mount+0x1306/0x1b30 fs/namespace.c:3138 > __do_sys_mount fs/namespace.c:3347 [inline] > __se_sys_mount fs/namespace.c:3324 [inline] > __x64_sys_mount+0x18f/0x230 fs/namespace.c:3324 > do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 > entry_SYSCALL_64_after_hwframe+0x49/0xb3 > RIP: 0033:0x45c889 > Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 > RSP: 002b:00007ffc1930ec48 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 > RAX: ffffffffffffffda RBX: 0000000001324914 RCX: 000000000045c889 > RDX: 0000000020000140 RSI: 0000000020000040 RDI: 0000000000000000 > RBP: 000000000076bf00 R08: 0000000000000000 R09: 0000000000000000 > R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 > R13: 0000000000000749 R14: 00000000004ca15a R15: 0000000000000013 Looking at the code now that it the internal mount of proc is no longer used it is possible to unmount proc. If proc is unmounted the fields of the pid namespace that were used for filesystem specific state are not reinitialized. Which means that proc_self and proc_thread_self can be pointers to already freed dentries. The reported user after free appears to be from mounting and unmounting proc followed by mounting proc again and using error injection to cause the new root dentry allocation to fail. This in turn results in proc_kill_sb running with proc_self and proc_thread_self still retaining their values from the previous mount of proc. Then calling dput on either proc_self of proc_thread_self will result in double put. Which KASAN sees as a use after free. Solve this by always reinitializing the filesystem state stored in the struct pid_namespace, when proc is unmounted. Reported-by: syzbot+72868dd424eb66c6b95f@syzkaller.appspotmail.com Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Fixes: 69879c01a0c3 ("proc: Remove the now unnecessary internal mount of proc") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> 16 April 2020, 04:52:29 UTC
907ea52 Theodore Ts'o 14 April 2020, 03:33:05 UTC ext4: convert BUG_ON's to WARN_ON's in mballoc.c If the in-core buddy bitmap gets corrupted (or out of sync with the block bitmap), issue a WARN_ON and try to recover. In most cases this involves skipping trying to allocate out of a particular block group. We can end up declaring the file system corrupted, which is fair, since the file system probably should be checked before we proceed any further. Link: https://lore.kernel.org/r/20200414035649.293164-1-tytso@mit.edu Google-Bug-Id: 34811296 Google-Bug-Id: 34639169 Signed-off-by: Theodore Ts'o <tytso@mit.edu> 16 April 2020, 03:58:49 UTC
a17a9d9 Theodore Ts'o 14 April 2020, 02:30:52 UTC ext4: increase wait time needed before reuse of deleted inode numbers Current wait times have proven to be too short to protect against inode reuses that lead to metadata inconsistencies. Now that we will retry the inode allocation if we can't find any recently deleted inodes, it's a lot safer to increase the recently deleted time from 5 seconds to a minute. Link: https://lore.kernel.org/r/20200414023925.273867-1-tytso@mit.edu Google-Bug-Id: 36602237 Signed-off-by: Theodore Ts'o <tytso@mit.edu> 16 April 2020, 03:58:49 UTC
6488141 Jason Yan 02 April 2020, 03:47:59 UTC ext4: remove set but not used variable 'es' in ext4_jbd2.c Fix the following gcc warning: fs/ext4/ext4_jbd2.c:341:30: warning: variable 'es' set but not used [-Wunused-but-set-variable] struct ext4_super_block *es; ^~ Fixes: 2ea2fc775321 ("ext4: save all error info in save_error_info() and drop ext4_set_errno()") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200402034759.29957-1-yanaijie@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 16 April 2020, 03:58:49 UTC
05ca87c Jason Yan 02 April 2020, 03:39:39 UTC ext4: remove set but not used variable 'es' Fix the following gcc warning: fs/ext4/super.c:599:27: warning: variable 'es' set but not used [-Wunused-but-set-variable] struct ext4_super_block *es; ^~ Fixes: 2ea2fc775321 ("ext4: save all error info in save_error_info() and drop ext4_set_errno()") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20200402033939.25303-1-yanaijie@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 16 April 2020, 03:58:49 UTC
801674f Jan Kara 31 March 2020, 10:50:16 UTC ext4: do not zeroout extents beyond i_disksize We do not want to create initialized extents beyond end of file because for e2fsck it is impossible to distinguish them from a case of corrupted file size / extent tree and so it complains like: Inode 12, i_size is 147456, should be 163840. Fix? no Code in ext4_ext_convert_to_initialized() and ext4_split_convert_extents() try to make sure it does not create initialized extents beyond inode size however they check against inode->i_size which is wrong. They should instead check against EXT4_I(inode)->i_disksize which is the current inode size on disk. That's what e2fsck is going to see in case of crash before all dirty data is written. This bug manifests as generic/456 test failure (with recent enough fstests where fsx got fixed to properly pass FALLOC_KEEP_SIZE_FL flags to the kernel) when run with dioread_lock mount option. CC: stable@vger.kernel.org Fixes: 21ca087a3891 ("ext4: Do not zero out uninitialized extents beyond i_size") Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20200331105016.8674-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> 16 April 2020, 03:58:48 UTC
9033783 Josh Triplett 29 March 2020, 20:21:41 UTC ext4: fix return-value types in several function comments The documentation comments for ext4_read_block_bitmap_nowait and ext4_read_inode_bitmap describe them as returning NULL on error, but they return an ERR_PTR on error; update the documentation to match. The documentation comment for ext4_wait_block_bitmap describes it as returning 1 on error, but it returns -errno on error; update the documentation to match. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Ritesh Harani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/60a3f4996f4932c45515aaa6b75ca42f2a78ec9b.1585512514.git.josh@joshtriplett.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> 16 April 2020, 03:58:48 UTC
d87f639 Roman Gushchin 29 February 2020, 00:14:11 UTC ext4: use non-movable memory for superblock readahead Since commit a8ac900b8163 ("ext4: use non-movable memory for the superblock") buffers for ext4 superblock were allocated using the sb_bread_unmovable() helper which allocated buffer heads out of non-movable memory blocks. It was necessarily to not block page migrations and do not cause cma allocation failures. However commit 85c8f176a611 ("ext4: preload block group descriptors") broke this by introducing pre-reading of the ext4 superblock. The problem is that __breadahead() is using __getblk() underneath, which allocates buffer heads out of movable memory. It resulted in page migration failures I've seen on a machine with an ext4 partition and a preallocated cma area. Fix this by introducing sb_breadahead_unmovable() and __breadahead_gfp() helpers which use non-movable memory for buffer head allocations and use them for the ext4 superblock readahead. Reviewed-by: Andreas Dilger <adilger@dilger.ca> Fixes: 85c8f176a611 ("ext4: preload block group descriptors") Signed-off-by: Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/r/20200229001411.128010-1-guro@fb.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 16 April 2020, 03:58:48 UTC
c2a559b yangerkun 26 February 2020, 04:10:02 UTC ext4: use matching invalidatepage in ext4_writepage Run generic/388 with journal data mode sometimes may trigger the warning in ext4_invalidatepage. Actually, we should use the matching invalidatepage in ext4_writepage. Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200226041002.13914-1-yangerkun@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> 16 April 2020, 03:58:48 UTC
1f641d9 Jones Syue 13 April 2020, 01:37:23 UTC cifs: improve read performance for page size 64KB & cache=strict & vers=2.1+ Found a read performance issue when linux kernel page size is 64KB. If linux kernel page size is 64KB and mount options cache=strict & vers=2.1+, it does not support cifs_readpages(). Instead, it is using cifs_readpage() and cifs_read() with maximum read IO size 16KB, which is much slower than read IO size 1MB when negotiated SMB 2.1+. Since modern SMB server supported SMB 2.1+ and Max Read Size can reach more than 64KB (for example 1MB ~ 8MB), this patch check max_read instead of maxBuf to determine whether server support readpages() and improve read performance for page size 64KB & cache=strict & vers=2.1+, and for SMB1 it is more cleaner to initialize server->max_read to server->maxBuf. The client is a linux box with linux kernel 4.2.8, page size 64KB (CONFIG_ARM64_64K_PAGES=y), cpu arm 1.7GHz, and use mount.cifs as smb client. The server is another linux box with linux kernel 4.2.8, share a file '10G.img' with size 10GB, and use samba-4.7.12 as smb server. The client mount a share from the server with different cache options: cache=strict and cache=none, mount -tcifs //<server_ip>/Public /cache_strict -overs=3.0,cache=strict,username=<xxx>,password=<yyy> mount -tcifs //<server_ip>/Public /cache_none -overs=3.0,cache=none,username=<xxx>,password=<yyy> The client download a 10GbE file from the server across 1GbE network, dd if=/cache_strict/10G.img of=/dev/null bs=1M count=10240 dd if=/cache_none/10G.img of=/dev/null bs=1M count=10240 Found that cache=strict (without patch) is slower read throughput and smaller read IO size than cache=none. cache=strict (without patch): read throughput 40MB/s, read IO size is 16KB cache=strict (with patch): read throughput 113MB/s, read IO size is 1MB cache=none: read throughput 109MB/s, read IO size is 1MB Looks like if page size is 64KB, cifs_set_ops() would use cifs_addr_ops_smallbuf instead of cifs_addr_ops, /* check if server can support readpages */ if (cifs_sb_master_tcon(cifs_sb)->ses->server->maxBuf < PAGE_SIZE + MAX_CIFS_HDR_SIZE) inode->i_data.a_ops = &cifs_addr_ops_smallbuf; else inode->i_data.a_ops = &cifs_addr_ops; maxBuf is came from 2 places, SMB2_negotiate() and CIFSSMBNegotiate(), (SMB2_MAX_BUFFER_SIZE is 64KB) SMB2_negotiate(): /* set it to the maximum buffer size value we can send with 1 credit */ server->maxBuf = min_t(unsigned int, le32_to_cpu(rsp->MaxTransactSize),       SMB2_MAX_BUFFER_SIZE); CIFSSMBNegotiate(): server->maxBuf = le32_to_cpu(pSMBr->MaxBufferSize); Page size 64KB and cache=strict lead to read_pages() use cifs_readpage() instead of cifs_readpages(), and then cifs_read() using maximum read IO size 16KB, which is much slower than maximum read IO size 1MB. (CIFSMaxBufSize is 16KB by default) /* FIXME: set up handlers for larger reads and/or convert to async */ rsize = min_t(unsigned int, cifs_sb->rsize, CIFSMaxBufSize); Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Jones Syue <jonessyue@qnap.com> Signed-off-by: Steve French <stfrench@microsoft.com> 16 April 2020, 02:15:11 UTC
f560cda Ronnie Sahlberg 12 April 2020, 06:09:26 UTC cifs: dump the session id and keys also for SMB2 sessions We already dump these keys for SMB3, lets also dump it for SMB2 sessions so that we can use the session key in wireshark to check and validate that the signatures are correct. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> 16 April 2020, 02:15:03 UTC
1e6adfe Dave Airlie 16 April 2020, 01:24:06 UTC Merge tag 'amd-drm-fixes-5.7-2020-04-15' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.7-2020-04-15: amdgpu: - gfx10 fix - SMU7 overclocking fix - RAS fix - GPU reset fix - Fix a regression in a previous s/r fix - Add a gfxoff quirk Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200415221631.3924-1-alexander.deucher@amd.com 16 April 2020, 01:24:10 UTC
bbf4ee2 Dave Airlie 16 April 2020, 01:17:00 UTC Merge tag 'drm-intel-fixes-2020-04-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix guest page access by using the brand new VFIO dma r/w interface (Yan) - Fix for i915 perf read buffers (Ashutosh) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200415200349.GA2550694@intel.com 16 April 2020, 01:17:32 UTC
0008633 Linus Torvalds 16 April 2020, 00:37:48 UTC Merge tag 'efi-urgent-2020-04-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Misc EFI fixes, including the boot failure regression caused by the BSS section not being cleared by the loaders" * tag 'efi-urgent-2020-04-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Revert struct layout change to fix kexec boot regression efi/x86: Don't remap text<->rodata gap read-only for mixed mode efi/x86: Fix the deletion of variables in mixed mode efi/libstub/file: Merge file name buffers to reduce stack usage Documentation/x86, efi/x86: Clarify EFI handover protocol and its requirements efi/arm: Deal with ADR going out of range in efi_enter_kernel() efi/x86: Always relocate the kernel for EFI handover entry efi/x86: Move efi stub globals from .bss to .data efi/libstub/x86: Remove redundant assignment to pointer hdr efi/cper: Use scnprintf() for avoiding potential buffer overflow 16 April 2020, 00:37:48 UTC
edadedf Tuong Lien 15 April 2020, 11:34:49 UTC tipc: fix incorrect increasing of link window In commit 16ad3f4022bb ("tipc: introduce variable window congestion control"), we allow link window to change with the congestion avoidance algorithm. However, there is a bug that during the slow-start if packet retransmission occurs, the link will enter the fast-recovery phase, set its window to the 'ssthresh' which is never less than 300, so the link window suddenly increases to that limit instead of decreasing. Consequently, two issues have been observed: - For broadcast-link: it can leave a gap between the link queues that a new packet will be inserted and sent before the previous ones, i.e. not in-order. - For unicast: the algorithm does not work as expected, the link window jumps to the slow-start threshold whereas packet retransmission occurs. This commit fixes the issues by avoiding such the link window increase, but still decreasing if the 'ssthresh' is lowered. Fixes: 16ad3f4022bb ("tipc: introduce variable window congestion control") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> 15 April 2020, 23:23:33 UTC
5309960 Cambda Zhu 15 April 2020, 09:54:04 UTC Documentation: Fix tcp_challenge_ack_limit default value The default value of tcp_challenge_ack_limit has been changed from 100 to 1000 and this patch fixes its documentation. Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 April 2020, 23:22:59 UTC
ae5a44b Jason Yan 15 April 2020, 08:42:48 UTC net: tulip: make early_486_chipsets static Fix the following sparse warning: drivers/net/ethernet/dec/tulip/tulip_core.c:1280:28: warning: symbol 'early_486_chipsets' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 April 2020, 23:22:14 UTC
c832275 Johan Jonker 15 April 2020, 20:01:49 UTC dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400 The description below is already in use in 'rk3228-evb.dts', 'rk3229-xms6.dts' and 'rk3328.dtsi' but somehow never added to a document, so add "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22" for ethernet-phy nodes on Rockchip platforms to 'ethernet-phy.yaml'. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 April 2020, 23:21:12 UTC
672e247 Colin Ian King 15 April 2020, 23:16:30 UTC ipv6: remove redundant assignment to variable err The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 April 2020, 23:20:22 UTC
c3a2079 Rob Herring 15 April 2020, 17:57:04 UTC dt-bindings: pwm: Fix cros-ec-pwm example dtc 'reg' warning The example for the CrOS EC PWM is incomplete and now generates a dtc warning: Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.example.dts:17.11-23.11: Warning (unit_address_vs_reg): /example-0/cros-ec@0: node has a unit name, but no reg or ranges property Fixing this results in more warnings as a parent spi node is needed as well. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Benson Leung <bleung@chromium.org> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: Guenter Roeck <groeck@chromium.org> Cc: linux-pwm@vger.kernel.org Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Rob Herring <robh@kernel.org> 15 April 2020, 21:24:17 UTC
af15f14 Ondrej Mosnacek 14 April 2020, 14:23:51 UTC selinux: free str on error in str_read() In [see "Fixes:"] I missed the fact that str_read() may give back an allocated pointer even if it returns an error, causing a potential memory leak in filename_trans_read_one(). Fix this by making the function free the allocated string whenever it returns a non-zero value, which also makes its behavior more obvious and prevents repeating the same mistake in the future. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1461665 ("Resource leaks") Fixes: c3a276111ea2 ("selinux: optimize storage of filename transitions") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Paul Moore <paul@paul-moore.com> 15 April 2020, 21:23:16 UTC
d98dbbe Tiezhu Yang 14 April 2020, 09:41:48 UTC scripts: documentation-file-ref-check: Add line break before exit If execute ./scripts/documentation-file-ref-check in a directory which is not a git tree, it will exit without a line break, fix it. Without this patch: [loongson@localhost linux-5.7-rc1]$ ./scripts/documentation-file-ref-check Warning: can't check if file exists, as this is not a git tree[loongson@localhost linux-5.7-rc1]$ With this patch: [loongson@localhost linux-5.7-rc1]$ ./scripts/documentation-file-ref-check Warning: can't check if file exists, as this is not a git tree [loongson@localhost linux-5.7-rc1]$ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/1586857308-2040-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Jonathan Corbet <corbet@lwn.net> 15 April 2020, 21:13:13 UTC
e8f4ba8 Peter Maydell 14 April 2020, 14:37:43 UTC scripts/kernel-doc: Add missing close-paren in c:function directives When kernel-doc generates a 'c:function' directive for a function one of whose arguments is a function pointer, it fails to print the close-paren after the argument list of the function pointer argument. For instance: long work_on_cpu(int cpu, long (*fn) (void *, void * arg) in driver-api/basics.html is missing a ')' separating the "void *" of the 'fn' arguments from the ", void * arg" which is an argument to work_on_cpu(). Add the missing close-paren, so that we render the prototype correctly: long work_on_cpu(int cpu, long (*fn)(void *), void * arg) (Note that Sphinx stops rendering a space between the '(fn*)' and the '(void *)' once it gets something that's syntactically valid.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Link: https://lore.kernel.org/r/20200414143743.32677-1-peter.maydell@linaro.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> 15 April 2020, 20:58:12 UTC
52338df Eric Biggers 14 April 2020, 17:24:30 UTC docs: admin-guide: merge sections for the kernel.modprobe sysctl Documentation for the kernel.modprobe sysctl was added both by commit 0317c5371e6a ("docs: merge debugging-modules.txt into sysctl/kernel.rst") and by commit 6e7158250625 ("docs: admin-guide: document the kernel.modprobe sysctl"), resulting in the same sysctl being documented in two places. Merge these into one place. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200414172430.230293-1-ebiggers@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> 15 April 2020, 20:50:09 UTC
404e603 Chris Packham 14 April 2020, 22:12:22 UTC docs: timekeeping: Use correct prototype for deprecated functions Use the correct prototypes for do_gettimeofday(), getnstimeofday() and getnstimeofday64(). All of these returned void and passed the return value by reference. This should make the documentation of their deprecation and replacements easier to search for. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200414221222.23996-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Jonathan Corbet <corbet@lwn.net> 15 April 2020, 20:48:26 UTC
7dba920 Jason Gunthorpe 14 April 2020, 23:02:07 UTC net/rds: Use ERR_PTR for rds_message_alloc_sgs() Returning the error code via a 'int *ret' when the function returns a pointer is very un-kernely and causes gcc 10's static analysis to choke: net/rds/message.c: In function ‘rds_message_map_pages’: net/rds/message.c:358:10: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] 358 | return ERR_PTR(ret); Use a typical ERR_PTR return instead. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 April 2020, 19:33:29 UTC
87b0f98 Vladimir Oltean 14 April 2020, 19:36:15 UTC net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge To rehash a previous explanation given in commit 1c44ce560b4d ("net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up"), the switch driver operates the in a mode where a single VLAN can be transmitted as untagged on a particular egress port. That is the "native VLAN on trunk port" use case. The configuration for this native VLAN is driven in 2 ways: - Set the egress port rewriter to strip the VLAN tag for the native VID (as it is egress-untagged, after all). - Configure the ingress port to drop untagged and priority-tagged traffic, if there is no native VLAN. The intention of this setting is that a trunk port with no native VLAN should not accept untagged traffic. Since both of the above configurations for the native VLAN should only be done if VLAN awareness is requested, they are actually done from the ocelot_port_vlan_filtering function, after the basic procedure of toggling the VLAN awareness flag of the port. But there's a problem with that simplistic approach: we are trying to juggle with 2 independent variables from a single function: - Native VLAN of the port - its value is held in port->vid. - VLAN awareness state of the port - currently there are some issues here, more on that later*. The actual problem can be seen when enslaving the switch ports to a VLAN filtering bridge: 0. The driver configures a pvid of zero for each port, when in standalone mode. While the bridge configures a default_pvid of 1 for each port that gets added as a slave to it. 1. The bridge calls ocelot_port_vlan_filtering with vlan_aware=true. The VLAN-filtering-dependent portion of the native VLAN configuration is done, considering that the native VLAN is 0. 2. The bridge calls ocelot_vlan_add with vid=1, pvid=true, untagged=true. The native VLAN changes to 1 (change which gets propagated to hardware). 3. ??? - nobody calls ocelot_port_vlan_filtering again, to reapply the VLAN-filtering-dependent portion of the native VLAN configuration, for the new native VLAN of 1. One can notice that after toggling "ip link set dev br0 type bridge vlan_filtering 0 && ip link set dev br0 type bridge vlan_filtering 1", the new native VLAN finally makes it through and untagged traffic finally starts flowing again. But obviously that shouldn't be needed. So it is clear that 2 independent variables need to both re-trigger the native VLAN configuration. So we introduce the second variable as ocelot_port->vlan_aware. *Actually both the DSA Felix driver and the Ocelot driver already had each its own variable: - Ocelot: ocelot_port_private->vlan_aware - Felix: dsa_port->vlan_filtering but the common Ocelot library needs to work with a single, common, variable, so there is some refactoring done to move the vlan_aware property from the private structure into the common ocelot_port structure. Fixes: 97bb69e1e36e ("net: mscc: ocelot: break apart ocelot_vlan_port_apply") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> 15 April 2020, 19:27:35 UTC
78b8771 David S. Miller 15 April 2020, 18:35:42 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2020-04-15 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 3 day(s) which contain a total of 11 files changed, 238 insertions(+), 95 deletions(-). The main changes are: 1) Fix offset overflow for BPF_MEM BPF_DW insn mapping on arm32 JIT, from Luke Nelson and Xi Wang. 2) Prevent mprotect() to make frozen & mmap()'ed BPF map writeable again, from Andrii Nakryiko and Jann Horn. 3) Fix type of old_fd in bpf_xdp_set_link_opts to int in libbpf and add selftests, from Toke Høiland-Jørgensen. 4) Fix AF_XDP to check that headroom cannot be larger than the available space in the chunk, from Magnus Karlsson. 5) Fix reset of XDP prog when expected_fd is set, from David Ahern. 6) Fix a segfault in bpftool's struct_ops command when BTF is not available, from Daniel T. Lee. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 15 April 2020, 18:35:42 UTC
6058ee0 David S. Miller 15 April 2020, 18:27:23 UTC Merge tag 'mac80211-for-net-2020-04-15' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A couple of fixes: * FTM responder policy netlink validation fix (but the only user validates again later) * kernel-doc fixes * a fix for a race in mac80211 radio registration vs. userspace * a mesh channel switch fix * a fix for a syzbot reported kasprintf() issue ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 15 April 2020, 18:27:23 UTC
8814044 Dmitry Osipenko 24 March 2020, 19:12:17 UTC i2c: tegra: Synchronize DMA before termination DMA transfer could be completed, but CPU (which handles DMA interrupt) may get too busy and can't handle the interrupt in a timely manner, despite of DMA IRQ being raised. In this case the DMA state needs to synchronized before terminating DMA transfer in order not to miss the DMA transfer completion. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 15 April 2020, 16:27:31 UTC
a900aea Dmitry Osipenko 24 March 2020, 19:12:16 UTC i2c: tegra: Better handle case where CPU0 is busy for a long time Boot CPU0 always handle I2C interrupt and under some rare circumstances (like running KASAN + NFS root) it may stuck in uninterruptible state for a significant time. In this case we will get timeout if I2C transfer is running on a sibling CPU, despite of IRQ being raised. In order to handle this rare condition, the IRQ status needs to be checked after completion timeout. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 15 April 2020, 16:27:25 UTC
c9a4ef6 Fangrui Song 14 April 2020, 16:32:55 UTC arm64: Delete the space separator in __emit_inst In assembly, many instances of __emit_inst(x) expand to a directive. In a few places __emit_inst(x) is used as an assembler macro argument. For example, in arch/arm64/kvm/hyp/entry.S ALTERNATIVE(nop, SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN) expands to the following by the C preprocessor: alternative_insn nop, .inst (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1 Both comma and space are separators, with an exception that content inside a pair of parentheses/quotes is not split, so the clang integrated assembler splits the arguments to: nop, .inst, (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1 GNU as preprocesses the input with do_scrub_chars(). Its arm64 backend (along with many other non-x86 backends) sees: alternative_insn nop,.inst(0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1 # .inst(...) is parsed as one argument while its x86 backend sees: alternative_insn nop,.inst (0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1 # The extra space before '(' makes the whole .inst (...) parsed as two arguments The non-x86 backend's behavior is considered unintentional (https://sourceware.org/bugzilla/show_bug.cgi?id=25750). So drop the space separator inside `.inst (...)` to make the clang integrated assembler work. Suggested-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Fangrui Song <maskray@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://github.com/ClangBuiltLinux/linux/issues/939 Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 15 April 2020, 12:07:12 UTC
c6c1115 Toke Høiland-Jørgensen 14 April 2020, 14:50:25 UTC selftests/bpf: Check for correct program attach/detach in xdp_attach test David Ahern noticed that there was a bug in the EXPECTED_FD code so programs did not get detached properly when that parameter was supplied. This case was not included in the xdp_attach tests; so let's add it to be sure that such a bug does not sneak back in down. Fixes: 87854a0b57b3 ("selftests/bpf: Add tests for attaching XDP programs") Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200414145025.182163-2-toke@redhat.com 15 April 2020, 11:26:08 UTC
49b452c Toke Høiland-Jørgensen 14 April 2020, 14:50:24 UTC libbpf: Fix type of old_fd in bpf_xdp_set_link_opts The 'old_fd' parameter used for atomic replacement of XDP programs is supposed to be an FD, but was left as a u32 from an earlier iteration of the patch that added it. It was converted to an int when read, so things worked correctly even with negative values, but better change the definition to correctly reflect the intention. Fixes: bd5ca3ef93cd ("libbpf: Add function to set link XDP fd while specifying old program") Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200414145025.182163-1-toke@redhat.com 15 April 2020, 11:26:08 UTC
25498a1 Andrii Nakryiko 14 April 2020, 18:26:45 UTC libbpf: Always specify expected_attach_type on program load if supported For some types of BPF programs that utilize expected_attach_type, libbpf won't set load_attr.expected_attach_type, even if expected_attach_type is known from section definition. This was done to preserve backwards compatibility with old kernels that didn't recognize expected_attach_type attribute yet (which was added in 5e43f899b03a ("bpf: Check attach type at prog load time"). But this is problematic for some BPF programs that utilize newer features that require kernel to know specific expected_attach_type (e.g., extended set of return codes for cgroup_skb/egress programs). This patch makes libbpf specify expected_attach_type by default, but also detect support for this field in kernel and not set it during program load. This allows to have a good metadata for bpf_program (e.g., bpf_program__get_extected_attach_type()), but still work with old kernels (for cases where it can work at all). Additionally, due to expected_attach_type being always set for recognized program types, bpf_program__attach_cgroup doesn't have to do extra checks to determine correct attach type, so remove that additional logic. Also adjust section_names selftest to account for this change. More detailed discussion can be found in [0]. [0] https://lore.kernel.org/bpf/20200412003604.GA15986@rdna-mbp.dhcp.thefacebook.com/ Fixes: 5cf1e9145630 ("bpf: cgroup inet skb programs can return 0 to 3") Fixes: 5e43f899b03a ("bpf: Check attach type at prog load time") Reported-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Andrey Ignatov <rdna@fb.com> Link: https://lore.kernel.org/bpf/20200414182645.1368174-1-andriin@fb.com 15 April 2020, 11:22:43 UTC
99e3a23 Magnus Karlsson 14 April 2020, 07:35:15 UTC xsk: Add missing check on user supplied headroom size Add a check that the headroom cannot be larger than the available space in the chunk. In the current code, a malicious user can set the headroom to a value larger than the chunk size minus the fixed XDP headroom. That way packets with a length larger than the supported size in the umem could get accepted and result in an out-of-bounds write. Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt") Reported-by: Bui Quang Minh <minhquangbui99@gmail.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=207225 Link: https://lore.kernel.org/bpf/1586849715-23490-1-git-send-email-magnus.karlsson@intel.com 15 April 2020, 11:07:18 UTC
9cc3d0c Mark Rutland 14 April 2020, 10:42:48 UTC arm64: vdso: don't free unallocated pages The aarch32_vdso_pages[] array never has entries allocated in the C_VVAR or C_VDSO slots, and as the array is zero initialized these contain NULL. However in __aarch32_alloc_vdso_pages() when aarch32_alloc_kuser_vdso_page() fails we attempt to free the page whose struct page is at NULL, which is obviously nonsensical. This patch removes the erroneous page freeing. Fixes: 7c1deeeb0130 ("arm64: compat: VDSO setup for compat layer") Cc: <stable@vger.kernel.org> # 5.3.x- Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> 15 April 2020, 10:13:16 UTC
3c1d161 Wolfram Sang 06 April 2020, 12:25:31 UTC i2c: remove i2c_new_probed_device API All in-tree users have been converted to the new i2c_new_scanned_device function, so remove this deprecated one. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 15 April 2020, 09:48:21 UTC
edb2c9d Wolfram Sang 27 March 2020, 22:28:26 UTC i2c: altera: use proper variable to hold errno device_property_read_u32() returns errno or 0, so we should use the integer variable 'ret' and not the u32 'val' to hold the retval. Fixes: 0560ad576268 ("i2c: altera: Add Altera I2C Controller driver") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 15 April 2020, 09:48:21 UTC
d79294d Hans de Goede 07 April 2020, 18:11:16 UTC i2c: designware: platdrv: Remove DPM_FLAG_SMART_SUSPEND flag on BYT and CHT We already set DPM_FLAG_SMART_PREPARE, so we completely skip all callbacks (other then prepare) where possible, quoting from dw_i2c_plat_prepare(): /* * If the ACPI companion device object is present for this device, it * may be accessed during suspend and resume of other devices via I2C * operation regions, so tell the PM core and middle layers to avoid * skipping system suspend/resume callbacks for it in that case. */ return !has_acpi_companion(dev); Also setting the DPM_FLAG_SMART_SUSPEND will cause acpi_subsys_suspend() to leave the controller runtime-suspended even if dw_i2c_plat_prepare() returned 0. Leaving the controller runtime-suspended normally, when the I2C controller is suspended during the suspend_late phase, is not an issue because the pm_runtime_get_sync() done by i2c_dw_xfer() will (runtime-)resume it. But for dw I2C controllers on Bay- and Cherry-Trail devices acpi_lpss.c leaves the controller alive until the suspend_noirq phase, because it may be used by the _PS3 ACPI methods of PCI devices and PCI devices are left powered on until the suspend_noirq phase. Between the suspend_late and resume_early phases runtime-pm is disabled. So for any ACPI I2C OPRegion accesses done after the suspend_late phase, the pm_runtime_get_sync() done by i2c_dw_xfer() is a no-op and the controller is left runtime-suspended. i2c_dw_xfer() has a check to catch this condition (rather then waiting for the I2C transfer to timeout because the controller is suspended). acpi_subsys_suspend() leaving the controller runtime-suspended in combination with an ACPI I2C OPRegion access done after the suspend_late phase triggers this check, leading to the following error being logged on a Bay Trail based Lenovo Thinkpad 8 tablet: [ 93.275882] i2c_designware 80860F41:00: Transfer while suspended [ 93.275993] WARNING: CPU: 0 PID: 412 at drivers/i2c/busses/i2c-designware-master.c:429 i2c_dw_xfer+0x239/0x280 ... [ 93.276252] Workqueue: kacpi_notify acpi_os_execute_deferred [ 93.276267] RIP: 0010:i2c_dw_xfer+0x239/0x280 ... [ 93.276340] Call Trace: [ 93.276366] __i2c_transfer+0x121/0x520 [ 93.276379] i2c_transfer+0x4c/0x100 [ 93.276392] i2c_acpi_space_handler+0x219/0x510 [ 93.276408] ? up+0x40/0x60 [ 93.276419] ? i2c_acpi_notify+0x130/0x130 [ 93.276433] acpi_ev_address_space_dispatch+0x1e1/0x252 ... So since on BYT and CHT platforms we want ACPI I2c OPRegion accesses to work until the suspend_noirq phase, we need the controller to be runtime-resumed during the suspend phase if it is runtime-suspended suspended at that time. This means that we must not set the DPM_FLAG_SMART_SUSPEND on these platforms. On BYT and CHT we already have a special ACCESS_NO_IRQ_SUSPEND flag to make sure the controller stays functional until the suspend_noirq phase. This commit makes the driver not set the DPM_FLAG_SMART_SUSPEND flag when that flag is set. Cc: stable@vger.kernel.org Fixes: b30f2f65568f ("i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 15 April 2020, 09:48:20 UTC
b0e387c Jason Yan 13 April 2020, 08:22:13 UTC x86/umip: Make umip_insns static Fix the following sparse warning: arch/x86/kernel/umip.c:84:12: warning: symbol 'umip_insns' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Link: https://lkml.kernel.org/r/20200413082213.22934-1-yanaijie@huawei.com 15 April 2020, 09:13:12 UTC
e0d648f Borislav Petkov 27 March 2020, 21:43:34 UTC sched/vtime: Work around an unitialized variable warning Work around this warning: kernel/sched/cputime.c: In function ‘kcpustat_field’: kernel/sched/cputime.c:1007:6: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized] because GCC can't see that val is used only when err is 0. Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200327214334.GF8015@zn.tnic 15 April 2020, 09:06:50 UTC
3662daf Peter Xu 03 April 2020, 22:35:17 UTC sched/isolation: Allow "isolcpus=" to skip unknown sub-parameters The "isolcpus=" parameter allows sub-parameters before the cpulist is specified, and if the parser detects an unknown sub-parameters the whole parameter will be ignored. This design is incompatible with itself when new sub-parameters are added. An older kernel will not recognize the new sub-parameter and will invalidate the whole parameter so the CPU isolation will not take effect. It emits a warning: isolcpus: Error, unknown flag The better and compatible way is to allow "isolcpus=" to skip unknown sub-parameters, so that even if new sub-parameters are added an older kernel will still be able to behave as usual even if with the new sub-parameter specified on the command line. Ideally this should have been there when the first sub-parameter for "isolcpus=" was introduced. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200403223517.406353-1-peterx@redhat.com 15 April 2020, 08:38:26 UTC
a966dcf Eugene Syromiatnikov 12 April 2020, 20:26:58 UTC clone3: add build-time CLONE_ARGS_SIZE_VER* validity checks CLONE_ARGS_SIZE_VER* macros are defined explicitly and not via the offsets of the relevant struct clone_args fields, which makes it rather error-prone, so it probably makes sense to add some compile-time checks for them (including the one that breaks on struct clone_args extension as a reminder to add a relevant size macro and a similar check). Function copy_clone_args_from_user seems to be a good place for such checks. Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200412202658.GA31499@asgard.redhat.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> 15 April 2020, 07:56:32 UTC
6217387 Eugene Syromiatnikov 12 April 2020, 20:31:23 UTC clone3: add a check for the user struct size if CLONE_INTO_CGROUP is set Passing CLONE_INTO_CGROUP with an under-sized structure (that doesn't properly contain cgroup field) seems like garbage input, especially considering the fact that fd 0 is a valid descriptor. Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200412203123.GA5869@asgard.redhat.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> 15 April 2020, 07:56:25 UTC
e82a118 Eugene Syromiatnikov 12 April 2020, 20:25:33 UTC clone3: fix cgroup argument sanity check Checking that cgroup field value of struct clone_args is less than 0 is useless, as it is defined as unsigned 64-bit integer. Moreover, it doesn't catch the situations where its higher bits are lost during the assignment to the cgroup field of the cgroup field of the internal struct kernel_clone_args (where it is declared as signed 32-bit integer), so it is still possible to pass garbage there. A check against INT_MAX solves both these issues. Fixes: ef2c41cf38a7559b ("clone3: allow spawning processes into cgroups") Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20200412202533.GA29554@asgard.redhat.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> 15 April 2020, 07:56:12 UTC
93e2d04 Tamizh chelvam 28 March 2020, 13:53:24 UTC mac80211: fix channel switch trigger from unknown mesh peer Previously mesh channel switch happens if beacon contains CSA IE without checking the mesh peer info. Due to that channel switch happens even if the beacon is not from its own mesh peer. Fixing that by checking if the CSA originated from the same mesh network before proceeding for channel switch. Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> Link: https://lore.kernel.org/r/1585403604-29274-1-git-send-email-tamizhr@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> 15 April 2020, 07:54:26 UTC
52e04b4 Sumit Garg 07 April 2020, 10:10:55 UTC mac80211: fix race in ieee80211_register_hw() A race condition leading to a kernel crash is observed during invocation of ieee80211_register_hw() on a dragonboard410c device having wcn36xx driver built as a loadable module along with a wifi manager in user-space waiting for a wifi device (wlanX) to be active. Sequence diagram for a particular kernel crash scenario: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | Kernel crash | | due to unallocated | | workqueue. | | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | | ieee80211_if_add() | | | | As evident from above sequence diagram, this race condition isn't specific to a particular wifi driver but rather the initialization sequence in ieee80211_register_hw() needs to be fixed. So re-order the initialization sequence and the updated sequence diagram would look like: user-space ieee80211_register_hw() ieee80211_tasklet_handler() ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | | | | alloc_ordered_workqueue() | | | | | Misc wiphy init. | | | | |<---phy0----wiphy_register() | |-----iwd if_add---->| | | |<---IRQ----(RX packet) | | | | ieee80211_if_add() | | | | Cc: stable@vger.kernel.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/1586254255-28713-1-git-send-email-sumit.garg@linaro.org [Johannes: fix rtnl imbalances] Signed-off-by: Johannes Berg <johannes.berg@intel.com> 15 April 2020, 07:31:58 UTC
0bbe7f7 Xiao Yang 14 April 2020, 01:51:45 UTC tracing: Fix the race between registering 'snapshot' event trigger and triggering 'snapshot' operation Traced event can trigger 'snapshot' operation(i.e. calls snapshot_trigger() or snapshot_count_trigger()) when register_snapshot_trigger() has completed registration but doesn't allocate buffer for 'snapshot' event trigger. In the rare case, 'snapshot' operation always detects the lack of allocated buffer so make register_snapshot_trigger() allocate buffer first. trigger-snapshot.tc in kselftest reproduces the issue on slow vm: ----------------------------------------------------------- cat trace ... ftracetest-3028 [002] .... 236.784290: sched_process_fork: comm=ftracetest pid=3028 child_comm=ftracetest child_pid=3036 <...>-2875 [003] .... 240.460335: tracing_snapshot_instance_cond: *** SNAPSHOT NOT ALLOCATED *** <...>-2875 [003] .... 240.460338: tracing_snapshot_instance_cond: *** stopping trace here! *** ----------------------------------------------------------- Link: http://lkml.kernel.org/r/20200414015145.66236-1-yangx.jy@cn.fujitsu.com Cc: stable@vger.kernel.org Fixes: 93e31ffbf417a ("tracing: Add 'snapshot' event trigger command") Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 15 April 2020, 02:02:10 UTC
31af27c Pavel Begunkov 14 April 2020, 21:39:50 UTC io_uring: don't count rqs failed after current one When checking for draining with __req_need_defer(), it tries to match how many requests were sent before a current one with number of already completed. Dropped SQEs are included in req->sequence, and they won't ever appear in CQ. To compensate for that, __req_need_defer() substracts ctx->cached_sq_dropped. However, what it should really use is number of SQEs dropped __before__ the current one. In other words, any submitted request shouldn't shouldn't affect dequeueing from the drain queue of previously submitted ones. Instead of saving proper ctx->cached_sq_dropped in each request, substract from req->sequence it at initialisation, so it includes number of properly submitted requests. note: it also changes behaviour of timeouts, but 1. it's already diverge from the description because of using SQ 2. the description is ambiguous regarding dropped SQEs Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 15 April 2020, 01:16:59 UTC
b55ce73 Pavel Begunkov 14 April 2020, 21:39:49 UTC io_uring: kill already cached timeout.seq_offset req->timeout.count and req->io->timeout.seq_offset store the same value, which is sqe->off. Kill the second one Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 15 April 2020, 01:16:57 UTC
22cad15 Pavel Begunkov 14 April 2020, 21:39:48 UTC io_uring: fix cached_sq_head in io_timeout() io_timeout() can be executed asynchronously by a worker and without holding ctx->uring_lock 1. using ctx->cached_sq_head there is racy there 2. it should count events from a moment of timeout's submission, but not execution Use req->sequence. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 15 April 2020, 01:16:55 UTC
91fac45 David S. Miller 14 April 2020, 23:48:09 UTC Merge branch 'Fix-88x3310-leaving-power-save-mode' Russell King says: ==================== Fix 88x3310 leaving power save mode This series fixes a problem with the 88x3310 PHY on Macchiatobin coming out of powersave mode noticed by Matteo Croce. It seems that certain PHY firmwares do not properly exit powersave mode, resulting in a fibre link not coming up. The solution appears to be to soft-reset the PHY after clearing the powersave bit. We add support for reporting the PHY firmware version to the kernel log, and use it to trigger this new behaviour if we have v0.3.x.x or more recent firmware on the PHY. This, however, is a guess as the firmware revision documentation does not mention this issue, and we know that v0.2.1.0 works without this fix but v0.3.3.0 and later does not. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 14 April 2020, 23:48:09 UTC
8f48c2a Russell King 14 April 2020, 19:49:08 UTC net: marvell10g: soft-reset the PHY when coming out of low power Soft-reset the PHY when coming out of low power mode, which seems to be necessary with firmware versions 0.3.3.0 and 0.3.10.0. This depends on ("net: marvell10g: report firmware version") Fixes: c9cc1c815d36 ("net: phy: marvell10g: place in powersave mode at probe") Reported-by: Matteo Croce <mcroce@redhat.com> Tested-by: Matteo Croce <mcroce@redhat.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 April 2020, 23:48:09 UTC
dd649b4 Russell King 14 April 2020, 19:49:03 UTC net: marvell10g: report firmware version Report the firmware version when probing the PHY to allow issues attributable to firmware to be diagnosed. Tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 April 2020, 23:48:09 UTC
c799fca Jason Gunthorpe 14 April 2020, 15:27:08 UTC net/cxgb4: Check the return from t4_query_params properly Positive return values are also failures that don't set val, although this probably can't happen. Fixes gcc 10 warning: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function ‘t4_phy_fw_ver’: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:3747:14: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized] 3747 | *phy_fw_ver = val; Fixes: 01b6961410b7 ("cxgb4: Add PHY firmware support for T420-BT cards") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 April 2020, 23:44:54 UTC
a7a0d62 Atsushi Nemoto 14 April 2020, 01:12:34 UTC net: stmmac: socfpga: Allow all RGMII modes Allow all the RGMII modes to be used. (Not only "rgmii", "rgmii-id" but "rgmii-txid", "rgmii-rxid") Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> 14 April 2020, 23:39:07 UTC
047c730 David S. Miller 14 April 2020, 23:33:26 UTC Merge branch 'mv88e6xxx-fixed-link-fixes' Andrew Lunn says: ==================== mv88e6xxx fixed link fixes Recent changes for how the MAC is configured broke fixed links, as used by CPU/DSA ports, and for SFPs when phylink cannot be used. The first fix is unchanged from v1. The second fix takes a different solution than v1. If a CPU or DSA port is known to have a PHYLINK instance, configure the port down before instantiating the PHYLINK, so it is in the down state as expected by PHYLINK. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 14 April 2020, 23:33:26 UTC
3be98b2 Andrew Lunn 14 April 2020, 00:34:39 UTC net: dsa: Down cpu/dsa ports phylink will control DSA and CPU ports can be configured in two ways. By default, the driver should configure such ports to there maximum bandwidth. For most use cases, this is sufficient. When this default is insufficient, a phylink instance can be bound to such ports, and phylink will configure the port, e.g. based on fixed-link properties. phylink assumes the port is initially down. Given that the driver should have already configured it to its maximum speed, ask the driver to down the port before instantiating the phylink instance. Fixes: 30c4a5b0aad8 ("net: mv88e6xxx: use resolved link config in mac_link_up()") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 14 April 2020, 23:33:26 UTC
34b5e6a Andrew Lunn 14 April 2020, 00:34:38 UTC net: dsa: mv88e6xxx: Configure MAC when using fixed link The 88e6185 is reporting it has detected a PHY, when a port is connected to an SFP. As a result, the fixed-phy configuration is not being applied. That then breaks packet transfer, since the port is reported as being down. Add additional conditions to check the interface mode, and if it is fixed always configure the port on link up/down, independent of the PPU status. Fixes: 30c4a5b0aad8 ("net: mv88e6xxx: use resolved link config in mac_link_up()") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 14 April 2020, 23:33:25 UTC
bec8141 David S. Miller 14 April 2020, 23:30:14 UTC Merge branch 'ionic-address-automated-build-complaints' Shannon Nelson says: ==================== ionic: address automated build complaints Kernel build checks found a couple of things to improve. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 14 April 2020, 23:30:14 UTC
2c0df9f Shannon Nelson 13 April 2020, 17:33:11 UTC ionic: fix unused assignment Remove an unused initialized value. Fixes: 7e4d47596b68 ("ionic: replay filters after fw upgrade") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> 14 April 2020, 23:30:14 UTC
555cd19 Shannon Nelson 13 April 2020, 17:33:10 UTC ionic: add dynamic_debug header Add the appropriate header for using dynamic_hex_dump(), which seems to be incidentally included in some configurations but not all. Fixes: 7e4d47596b68 ("ionic: replay filters after fw upgrade") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net> 14 April 2020, 23:30:14 UTC
0e631ee David Howells 13 April 2020, 12:57:14 UTC rxrpc: Fix DATA Tx to disable nofrag for UDP on AF_INET6 socket Fix the DATA packet transmission to disable nofrag for UDPv4 on an AF_INET6 socket as well as UDPv6 when trying to transmit fragmentably. Without this, packets filled to the normal size used by the kernel AFS client of 1412 bytes be rejected by udp_sendmsg() with EMSGSIZE immediately. The ->sk_error_report() notification hook is called, but rxrpc doesn't generate a trace for it. This is a temporary fix; a more permanent solution needs to involve changing the size of the packets being filled in accordance with the MTU, which isn't currently done in AF_RXRPC. The reason for not doing so was that, barring the last packet in an rx jumbo packet, jumbos can only be assembled out of 1412-byte packets - and the plan was to construct jumbos on the fly at transmission time. Also, there's no point turning on IPV6_MTU_DISCOVER, since IPv6 has to engage in this anyway since fragmentation is only done by the sender. We can then condense the switch-statement in rxrpc_send_data_packet(). Fixes: 75b54cb57ca3 ("rxrpc: Add IPv6 support") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 April 2020, 23:26:47 UTC
68dac3e Atsushi Nemoto 10 April 2020, 03:16:16 UTC net: phy: micrel: use genphy_read_status for KSZ9131 KSZ9131 will not work with some switches due to workaround for KSZ9031 introduced in commit d2fd719bcb0e83cb39cfee22ee800f98a56eceb3 ("net/phy: micrel: Add workaround for bad autoneg"). Use genphy_read_status instead of dedicated ksz9031_read_status. Fixes: bff5b4b37372 ("net: phy: micrel: add Microchip KSZ9131 initial driver") Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> 14 April 2020, 23:25:30 UTC
2c127c4 Rafael J. Wysocki 14 April 2020, 21:13:53 UTC Merge branch 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Merge an operating performance points (OPP) framework update for 5.7-rc2 from Viresh Kumar: "This contains a single patch that lets the OPP core to be used by several IO drivers without making a lot of changes in them for the case where the same driver may be used by a platform with an OPP table or a clock node on another one. I am looking to get this into 5.7 release itself, which will enable other users (in multiple frameworks) to get merged without waiting for the dependency to get resolved." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Manage empty OPP tables with clk handle 14 April 2020, 21:13:53 UTC
5fd274e Mauro Carvalho Chehab 14 April 2020, 16:48:54 UTC docs: dt: rockchip,dwc3.txt: fix a pointer to a renamed file phy-rockchip-inno-usb2.txt was converted to yaml. Fix the corresponding reference. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> 14 April 2020, 21:02:30 UTC
27b128b Mauro Carvalho Chehab 14 April 2020, 16:48:50 UTC docs: dt: fix a broken reference for a file converted to json Changeset 32ced09d7903 ("dt-bindings: serial: Convert slave-device bindings to json-schema") moved a binding to json and updated the links. Yet, one link was not changed, due to a merge conflict. Update this one too. Fixes: 32ced09d7903 ("dt-bindings: serial: Convert slave-device bindings to json-schema") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> 14 April 2020, 21:02:17 UTC
0c134f5 Mauro Carvalho Chehab 14 April 2020, 16:48:49 UTC docs: dt: qcom,dwc3.txt: fix cross-reference for a converted file The qcom-qusb2-phy.txt file was converted and renamed to yaml. Update cross-reference accordingly. Fixes: 8ce65d8d38df ("dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml") Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> 14 April 2020, 21:01:21 UTC
b8a1707 Mauro Carvalho Chehab 14 April 2020, 16:48:34 UTC docs: dt: fix broken reference to phy-cadence-torrent.yaml This file was removed, and another file was added instead of it, on two separate commits. Splitting a single logical change (doc conversion) on two patches is a bad thing, as it makes harder to discover what crap happened. Anyway, this patch fixes the broken reference, making it pointing to the new location of the file. Fixes: 922003733d42 ("dt-bindings: phy: Remove Cadence MHDP PHY dt binding") Fixes: c6d8eef38b7f ("dt-bindings: phy: Add Cadence MHDP PHY bindings in YAML format.") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> 14 April 2020, 21:01:02 UTC
7801eba Rob Herring 09 April 2020, 18:27:32 UTC dt-bindings: interrupt-controller: Fix loongson,parent_int_map property schema 'loongson,parent_int_map' is an array, but the schema is defining a matrix resulting in the follow warnings: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml: interrupt-controller@3ff01400: loongson,parent_int_map:0: [4043309055] is too short Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml: interrupt-controller@3ff01400: loongson,parent_int_map:1: [251658240] is too short Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml: interrupt-controller@3ff01400: loongson,parent_int_map:2: [0] is too short Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml: interrupt-controller@3ff01400: loongson,parent_int_map:3: [0] is too short The correct way to define an array is a list in 'items' and/or a size defined by 'minItems' and 'maxItems'. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> 14 April 2020, 20:41:14 UTC
ce81bd6 Rob Herring 09 April 2020, 18:20:09 UTC dt-bindings: hwmon: Fix incorrect $id paths Fix the path warnings in the adi,axi-fan-control and adt7475 bindings: Documentation/devicetree/bindings/hwmon/adt7475.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/hwmon/adt7475.yaml# Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml# Cc: Jean Delvare <jdelvare@suse.com> Cc: linux-hwmon@vger.kernel.org Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Rob Herring <robh@kernel.org> 14 April 2020, 20:41:14 UTC
f88d59f Rob Herring 09 April 2020, 18:05:24 UTC dt-bindings: Fix dtc warnings on reg and ranges in examples A recent update to dtc and changes to the default warnings introduced some new warnings in the DT binding examples: Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.example.dts:23.13-61: Warning (dma_ranges_format): /example-0/dram-controller@1c01000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.example.dts:17.22-28.11: Warning (unit_address_vs_reg): /example-0/fpga-axi@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dts:34.13-54: Warning (dma_ranges_format): /example-0/memory-controller@2c00000:dma-ranges: "dma-ranges" property has invalid length (24 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 2) Documentation/devicetree/bindings/mfd/st,stpmic1.example.dts:19.15-79.11: Warning (unit_address_vs_reg): /example-0/i2c@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.example.dts:28.23-31.15: Warning (unit_address_vs_reg): /example-0/mdio@37000000/switch@10: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/rng/brcm,bcm2835.example.dts:17.5-21.11: Warning (unit_address_vs_reg): /example-0/rng: node has a reg or ranges property, but no unit name Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.example.dts:20.20-43.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/usb/ingenic,musb.example.dts:18.28-21.11: Warning (unit_address_vs_reg): /example-0/usb-phy@0: node has a unit name, but no reg or ranges property Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "Nuno Sá" <nuno.sa@analog.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Mark Brown <broonie@kernel.org> Cc: linux-hwmon@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-spi@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> 14 April 2020, 20:41:13 UTC
213d0e4 Matti Vaittinen 06 April 2020, 07:30:08 UTC dt-bindings: BD718x7 - add missing I2C bus properties The DT example needs #address-cells and #size-cells for I2C bus or validity checker will generate warnings. Add these properties in BD71837 and BD71847 binding examples. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Rob Herring <robh@kernel.org> 14 April 2020, 20:41:13 UTC
ec76f57 Fabio Estevam 28 March 2020, 18:53:26 UTC dt-bindings: clock: syscon-icst: Remove unneeded unit name The following warnings are seen with 'make dt_binding_check': Documentation/devicetree/bindings/clock/arm,syscon-icst.example.dts:17.16-24.11: Warning (unit_address_vs_reg): /example-0/clock@00: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/clock/arm,syscon-icst.example.dts:17.16-24.11: Warning (unit_address_format): /example-0/clock@00: unit name should not have leading 0s Fix them by removing the unneeded clock unit name. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> 14 April 2020, 20:41:13 UTC
c6be88a Fabio Estevam 27 March 2020, 19:22:40 UTC dt-bindings: touchscreen: edt-ft5x06: Remove unneeded I2C unit name The following warnings are seen with 'make dt_binding_check': Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (unit_address_vs_reg): /example-0/i2c@00000000: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.example.dts:19.22-30.11: Warning (unit_address_format): /example-0/i2c@00000000: unit name should not have leading 0s Fix it by removing the unneeded i2c unit name. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> 14 April 2020, 20:41:13 UTC
bc4be55 Fabio Estevam 27 March 2020, 13:18:25 UTC dt-bindings: iio: dac: ad5770r: Fix the file path The following warning is seen with 'make dt_binding_check': Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml: $id: relative path/filename doesn't match actual path or filename Fix it by removing the "bindings" directory from the file path. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> 14 April 2020, 20:41:13 UTC
7d6243a Fabio Estevam 27 March 2020, 13:18:23 UTC dt-bindings: iio: dac: ad5770r: Add vendor to compatible string The compatible string in the example misses the vendor information. Pass the "adi" vendor to fix it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> 14 April 2020, 20:41:13 UTC
82f3527 David S. Miller 14 April 2020, 20:07:19 UTC Merge tag 'wireless-drivers-2020-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.7 First set of fixes for v5.6. Fixes for a crash and for two compiler warnings. brcmfmac * fix a crash related to monitor interface ath11k * fix compiler warnings without CONFIG_THERMAL rtw88 * fix compiler warnings related to suspend and resume functions ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 14 April 2020, 20:07:19 UTC
89f33dc Zou Wei 13 April 2020, 11:57:56 UTC bpf: remove unneeded conversion to bool in __mark_reg_unknown This issue was detected by using the Coccinelle software: kernel/bpf/verifier.c:1259:16-21: WARNING: conversion to bool not needed here The conversion to bool is unneeded, remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/1586779076-101346-1-git-send-email-zou_wei@huawei.com 14 April 2020, 19:40:06 UTC
dfa7490 David Ahern 12 April 2020, 13:32:04 UTC xdp: Reset prog in dev_change_xdp_fd when fd is negative The commit mentioned in the Fixes tag reuses the local prog variable when looking up an expected_fd. The variable is not reset when fd < 0 causing a detach with the expected_fd set to actually call dev_xdp_install for the existing program. The end result is that the detach does not happen. Fixes: 92234c8f15c8 ("xdp: Support specifying expected existing program when attaching XDP") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200412133204.43847-1-dsahern@kernel.org 14 April 2020, 19:38:02 UTC
96b2eb6 Daniel T. Lee 10 April 2020, 02:06:12 UTC tools, bpftool: Fix struct_ops command invalid pointer free In commit 65c93628599d ("bpftool: Add struct_ops support") a new type of command named struct_ops has been added. This command requires a kernel with CONFIG_DEBUG_INFO_BTF=y set and for retrieving BTF info in bpftool, the helper get_btf_vmlinux() is used. When running this command on kernel without BTF debug info, this will lead to 'btf_vmlinux' variable being an invalid(error) pointer. And by this, btf_free() causes a segfault when executing 'bpftool struct_ops'. This commit adds pointer validation with IS_ERR not to free invalid pointer, and this will fix the segfault issue. Fixes: 65c93628599d ("bpftool: Add struct_ops support") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200410020612.2930667-1-danieltimlee@gmail.com 14 April 2020, 19:33:53 UTC
642c165 Andrii Nakryiko 10 April 2020, 20:26:13 UTC selftests/bpf: Validate frozen map contents stays frozen Test that frozen and mmap()'ed BPF map can't be mprotect()'ed as writable or executable memory. Also validate that "downgrading" from writable to read-only doesn't screw up internal writable count accounting for the purposes of map freezing. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200410202613.3679837-2-andriin@fb.com 14 April 2020, 19:28:57 UTC
1f6cb19 Andrii Nakryiko 10 April 2020, 20:26:12 UTC bpf: Prevent re-mmap()'ing BPF map as writable for initially r/o mapping VM_MAYWRITE flag during initial memory mapping determines if already mmap()'ed pages can be later remapped as writable ones through mprotect() call. To prevent user application to rewrite contents of memory-mapped as read-only and subsequently frozen BPF map, remove VM_MAYWRITE flag completely on initially read-only mapping. Alternatively, we could treat any memory-mapping on unfrozen map as writable and bump writecnt instead. But there is little legitimate reason to map BPF map as read-only and then re-mmap() it as writable through mprotect(), instead of just mmap()'ing it as read/write from the very beginning. Also, at the suggestion of Jann Horn, drop unnecessary refcounting in mmap operations. We can just rely on VMA holding reference to BPF map's file properly. Fixes: fc9702273e2e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY") Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/bpf/20200410202613.3679837-1-andriin@fb.com 14 April 2020, 19:28:57 UTC
4178417 Luke Nelson 09 April 2020, 22:17:52 UTC arm, bpf: Fix offset overflow for BPF_MEM BPF_DW This patch fixes an incorrect check in how immediate memory offsets are computed for BPF_DW on arm. For BPF_LDX/ST/STX + BPF_DW, the 32-bit arm JIT breaks down an 8-byte access into two separate 4-byte accesses using off+0 and off+4. If off fits in imm12, the JIT emits a ldr/str instruction with the immediate and avoids the use of a temporary register. While the current check off <= 0xfff ensures that the first immediate off+0 doesn't overflow imm12, it's not sufficient for the second immediate off+4, which may cause the second access of BPF_DW to read/write the wrong address. This patch fixes the problem by changing the check to off <= 0xfff - 4 for BPF_DW, ensuring off+4 will never overflow. A side effect of simplifying the check is that it now allows using negative immediate offsets in ldr/str. This means that small negative offsets can also avoid the use of a temporary register. This patch introduces no new failures in test_verifier or test_bpf.c. Fixes: c5eae692571d6 ("ARM: net: bpf: improve 64-bit store implementation") Fixes: ec19e02b343db ("ARM: net: bpf: fix LDX instructions") Co-developed-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Luke Nelson <luke.r.nels@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200409221752.28448-1-luke.r.nels@gmail.com 14 April 2020, 19:27:54 UTC
8632e9b Linus Torvalds 14 April 2020, 18:58:04 UTC Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - a series from Tianyu Lan to fix crash reporting on Hyper-V - three miscellaneous cleanup patches * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/Hyper-V: Report crash data in die() when panic_on_oops is set x86/Hyper-V: Report crash register data when sysctl_record_panic_msg is not set x86/Hyper-V: Report crash register data or kmsg before running crash kernel x86/Hyper-V: Trigger crash enlightenment only once during system crash. x86/Hyper-V: Free hv_panic_page when fail to register kmsg dump x86/Hyper-V: Unload vmbus channel in hv panic callback x86: hyperv: report value of misc_features hv_debugfs: Make hv_debug_root static hv: hyperv_vmbus.h: Replace zero-length array with flexible-array member 14 April 2020, 18:58:04 UTC
6cc9306 Linus Torvalds 14 April 2020, 18:51:30 UTC Merge tag 'for-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "We have a few regressions and one fix for stable: - revert fsync optimization - fix lost i_size update - fix a space accounting leak - build fix, add back definition of a deprecated ioctl flag - fix search condition for old roots in relocation" * tag 'for-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: re-instantiate the removed BTRFS_SUBVOL_CREATE_ASYNC definition btrfs: fix reclaim counter leak of space_info objects btrfs: make full fsyncs always operate on the entire file again btrfs: fix lost i_size update after cloning inline extent btrfs: check commit root generation in should_ignore_root 14 April 2020, 18:51:30 UTC
f4cd666 Linus Torvalds 14 April 2020, 18:47:30 UTC Merge tag 'afs-fixes-20200413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS fixes from David Howells: - Fix the decoding of fetched file status records so that the xdr pointer is advanced under all circumstances. - Fix the decoding of a fetched file status record that indicates an inline abort (ie. an error) so that it sets the flag saying the decoder stored the abort code. - Fix the decoding of the result of the rename operation so that it doesn't skip the decoding of the second fetched file status (ie. that of the dest dir) in the case that the source and dest dirs were the same as this causes the xdr pointer not to be advanced, leading to incorrect decoding of subsequent parts of the reply. - Fix the dump of a bad YFSFetchStatus record to dump the full length. - Fix a race between local editing of directory contents and accessing the dir for reading or d_revalidate by using the same lock in both. - Fix afs_d_revalidate() to not accidentally reverse the version on a dentry when it's meant to be bringing it forward. * tag 'afs-fixes-20200413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Fix afs_d_validate() to set the right directory version afs: Fix race between post-modification dir edit and readdir/d_revalidate afs: Fix length of dump of bad YFSFetchStatus record afs: Fix rename operation status delivery afs: Fix decoding of inline abort codes from version 1 status records afs: Fix missing XDR advance in xdr_decode_{AFS,YFS}FSFetchStatus() 14 April 2020, 18:47:30 UTC
974229d Alex Deucher 09 April 2020, 13:40:01 UTC drm/amdgpu/gfx9: add gfxoff quirk Fix screen corruption with firefox. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=207171 Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 14 April 2020, 16:48:43 UTC
b2a7e97 Prike Liang 13 April 2020, 13:41:14 UTC drm/amdgpu: fix the hw hang during perform system reboot and reset The system reboot failed as some IP blocks enter power gate before perform hw resource destory. Meanwhile use unify interface to set device CGPG to ungate state can simplify the amdgpu poweroff or reset ungate guard. Fixes: 487eca11a321ef ("drm/amdgpu: fix gfx hang during suspend with video playback (v2)") Signed-off-by: Prike Liang <Prike.Liang@amd.com> Tested-by: Mengbing Wang <Mengbing.Wang@amd.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 14 April 2020, 16:48:01 UTC
bdf89df John Allen 09 April 2020, 15:34:29 UTC x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE Future AMD CPUs will have microcode patches that exceed the default 4K patch size. Raise our limit. Signed-off-by: John Allen <john.allen@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org # v4.14.. Link: https://lkml.kernel.org/r/20200409152931.GA685273@mojo.amd.com 14 April 2020, 15:34:46 UTC
back to top