Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
159c6be Gui Jianfeng 04 June 2008, 19:38:07 UTC sctp: Move sctp_v4_dst_saddr out of loop There's no need to execute sctp_v4_dst_saddr() for each iteration, just move it out of loop. Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 June 2008, 19:38:07 UTC
4141ddc Gui Jianfeng 04 June 2008, 19:37:33 UTC sctp: retran_path update bug fix If the current retran_path is the only active one, it should update it to the the next inactive one. Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 June 2008, 19:37:33 UTC
aed5a83 David S. Miller 04 June 2008, 19:10:21 UTC Merge branch 'net-2.6-misc-20080605a' of git://git.linux-ipv6.org/gitroot/yoshfuji/linux-2.6-fix 04 June 2008, 19:10:21 UTC
a660447 Ilpo Järvinen 04 June 2008, 19:07:44 UTC tcp: fix skb vs fack_count out-of-sync condition This bug is able to corrupt fackets_out in very rare cases. In order for this to cause corruption: 1) DSACK in the middle of previous SACK block must be generated. 2) In order to take that particular branch, part or all of the DSACKed segment must already be SACKed so that we have that in cache in the first place. 3) The new info must be top enough so that fackets_out will be updated on this iteration. ...then fack_count is updated while skb wasn't, then we walk again that particular segment thus updating fack_count twice for a single skb and finally that value is assigned to fackets_out by tcp_sacktag_one. It is safe to call tcp_sacktag_one just once for a segment (at DSACK), no need to call again for plain SACK. Potential problem of the miscount are limited to premature entry to recovery and to inflated reordering metric (which could even cancel each other out in the most the luckiest scenarios :-)). Both are quite insignificant in worst case too and there exists also code to reset them (fackets_out once sacked_out becomes zero and reordering metric on RTO). This has been reported by a number of people, because it occurred quite rarely, it has been very evasive. Andy Furniss was able to get it to occur couple of times so that a bit more info was collected about the problem using a debug patch, though it still required lot of checking around. Thanks also to others who have tried to help here. This is listed as Bugzilla #10346. The bug was introduced by me in commit 68f8353b48 ([TCP]: Rewrite SACK block processing & sack_recv_cache use), I probably thought back then that there's need to scan that entry twice or didn't dare to make it go through it just once there. Going through twice would have required restoring fack_count after the walk but as noted above, I chose to drop the additional walk step altogether here. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net> 04 June 2008, 19:07:44 UTC
c03e05d Mark Asselstine 04 June 2008, 19:06:28 UTC sunhme: Cleanup use of deprecated calls to save_and_cli and restore_flags. Make use of local_irq_save and local_irq_restore rather then the deprecated save_and_cli and restore_flags calls. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> 04 June 2008, 19:06:28 UTC
a13366c Adrian-Ken Rueegsegger 04 June 2008, 19:04:55 UTC xfrm: xfrm_algo: correct usage of RIPEMD-160 This patch fixes the usage of RIPEMD-160 in xfrm_algo which in turn allows hmac(rmd160) to be used as authentication mechanism in IPsec ESP and AH (see RFC 2857). Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> 04 June 2008, 19:04:55 UTC
9596cc8 Denis V. Lunev 04 June 2008, 11:49:08 UTC [IPV6]: Do not change protocol for UDPv6 sockets with pending sent data. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> 04 June 2008, 19:02:38 UTC
36d926b Denis V. Lunev 04 June 2008, 11:49:07 UTC [IPV6]: inet_sk(sk)->cork.opt leak IPv6 UDP sockets wth IPv4 mapped address use udp_sendmsg to send the data actually. In this case ip_flush_pending_frames should be called instead of ip6_flush_pending_frames. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> 04 June 2008, 19:02:38 UTC
49d074f Denis V. Lunev 04 June 2008, 11:49:06 UTC [IPV6]: Do not change protocol for raw IPv6 sockets. It is not allowed to change underlying protocol for int fd = socket(PF_INET6, SOCK_RAW, IPPROTO_UDP); Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> 04 June 2008, 19:02:37 UTC
91e1908 YOSHIFUJI Hideaki 04 June 2008, 04:02:49 UTC [IPV6] NETNS: Handle ancillary data in appropriate namespace. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> 04 June 2008, 19:02:36 UTC
187e383 YOSHIFUJI Hideaki 04 June 2008, 04:01:37 UTC [IPV6]: Check outgoing interface even if source address is unspecified. The outgoing interface index (ipi6_ifindex) in IPV6_PKTINFO ancillary data, is not checked if the source address (ipi6_addr) is unspecified. If the ipi6_ifindex is the not-exist interface, it should be fail. Based on patch from Shan Wei <shanwei@cn.fujitsu.com> and Brian Haley <brian.haley@hp.com>. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> 04 June 2008, 19:02:35 UTC
95b496b Yang Hongyang 28 May 2008, 08:27:28 UTC [IPV6]: Fix the data length of get destination options with short length If get destination options with length which is not enough for that option,getsockopt() will still return the real length of the option, which is larger then the buffer space. This is because ipv6_getsockopt_sticky() returns the real length of the option. This patch fix this problem. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> 04 June 2008, 19:02:35 UTC
05335c2 Yang Hongyang 28 May 2008, 08:23:47 UTC [IPV6]: Fix the return value of get destination options with NULL data pointer If we pass NULL data buffer to getsockopt(), it will return 0, and the option length is set to -EFAULT: getsockopt(sk, IPPROTO_IPV6, IPV6_DSTOPTS, NULL, &len); This is because ipv6_getsockopt_sticky() will return -EFAULT or -EINVAL if some error occur. This patch fix this problem. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> 04 June 2008, 19:02:34 UTC
4bed72e YOSHIFUJI Hideaki 27 May 2008, 08:37:49 UTC [IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> 04 June 2008, 19:02:34 UTC
baa2bfb YOSHIFUJI Hideaki 30 May 2008, 02:35:03 UTC [IPV4] TUNNEL4: Fix incoming packet length check for inter-protocol tunnel. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> 04 June 2008, 19:02:33 UTC
8283637 Colin 26 May 2008, 16:04:43 UTC [IPV6] TUNNEL6: Fix incoming packet length check for inter-protocol tunnel. I discover a strange behavior in [ipv4 in ipv6] tunnel. When IPv6 tunnel payload is less than 40(0x28), packet can be sent to network, received in physical interface, but not seen in IP tunnel interface. No counter increase in tunnel interface. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> 04 June 2008, 19:02:32 UTC
24ef0da Thomas Graf 28 May 2008, 14:54:22 UTC [IPV6] ADDRCONF: Check range of prefix length As of now, the prefix length is not vaildated when adding or deleting addresses. The value is passed directly into the inet6_ifaddr structure and later passed on to memcmp() as length indicator which relies on the value never to exceed 128 (bits). Due to the missing check, the currently code allows for any 8 bit value to be passed on as prefix length while using the netlink interface, and any 32 bit value while using the ioctl interface. [Use unsigned int instead to generate better code - yoshfuji] Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> 04 June 2008, 19:02:31 UTC
a3c9608 YOSHIFUJI Hideaki 03 June 2008, 16:30:25 UTC [IPV6] UDP: Possible dst leak in udpv6_sendmsg. ip6_sk_dst_lookup returns held dst entry. It should be released on all paths beyond this point. Add missed release when up->pending is set. Bug report and initial patch by Denis V. Lunev <den@openvz.org>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Denis V. Lunev <den@openvz.org> 04 June 2008, 19:02:31 UTC
e511710 YOSHIFUJI Hideaki 29 May 2008, 10:55:05 UTC [SCTP]: Fix NULL dereference of asoc. Commit 7cbca67c073263c179f605bdbbdc565ab29d801d ("[IPV6]: Support Source Address Selection API (RFC5014)") introduced NULL dereference of asoc to sctp_v6_get_saddr in net/sctp/ipv6.c. Pointed out by Johann Felix Soden <johfel@users.sourceforge.net>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> 04 June 2008, 19:02:30 UTC
8b91ac0 David S. Miller 04 June 2008, 18:50:00 UTC Merge branch 'davem-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 04 June 2008, 18:50:00 UTC
8aca6cb Ilpo Järvinen 04 June 2008, 18:34:22 UTC tcp: Fix inconsistency source (CA_Open only when !tcp_left_out(tp)) It is possible that this skip path causes TCP to end up into an invalid state where ca_state was left to CA_Open while some segments already came into sacked_out. If next valid ACK doesn't contain new SACK information TCP fails to enter into tcp_fastretrans_alert(). Thus at least high_seq is set incorrectly to a too high seqno because some new data segments could be sent in between (and also, limited transmit is not being correctly invoked there). Reordering in both directions can easily cause this situation to occur. I guess we would want to use tcp_moderate_cwnd(tp) there as well as it may be possible to use this to trigger oversized burst to network by sending an old ACK with huge amount of SACK info, but I'm a bit unsure about its effects (mainly to FlightSize), so to be on the safe side I just currently fixed it minimally to keep TCP's state consistent (obviously, such nasty ACKs have been possible this far). Though it seems that FlightSize is already underestimated by some amount, so probably on the long term we might want to trigger recovery there too, if appropriate, to make FlightSize calculation to resemble reality at the time when the losses where discovered (but such change scares me too much now and requires some more thinking anyway how to do that as it likely involves some code shuffling). This bug was found by Brian Vowell while running my TCP debug patch to find cause of another TCP issue (fackets_out miscount). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net> 04 June 2008, 18:34:22 UTC
b9c6989 Jarek Poplawski 04 June 2008, 16:58:27 UTC netfilter: nf_conntrack_ipv6: fix inconsistent lock state in nf_ct_frag6_gather() [ 63.531438] ================================= [ 63.531520] [ INFO: inconsistent lock state ] [ 63.531520] 2.6.26-rc4 #7 [ 63.531520] --------------------------------- [ 63.531520] inconsistent {softirq-on-W} -> {in-softirq-W} usage. [ 63.531520] tcpsic6/3864 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 63.531520] (&q->lock#2){-+..}, at: [<c07175b0>] ipv6_frag_rcv+0xd0/0xbd0 [ 63.531520] {softirq-on-W} state was registered at: [ 63.531520] [<c0143bba>] __lock_acquire+0x3aa/0x1080 [ 63.531520] [<c0144906>] lock_acquire+0x76/0xa0 [ 63.531520] [<c07a8f0b>] _spin_lock+0x2b/0x40 [ 63.531520] [<c0727636>] nf_ct_frag6_gather+0x3f6/0x910 ... According to this and another similar lockdep report inet_fragment locks are taken from nf_ct_frag6_gather() with softirqs enabled, but these locks are mainly used in softirq context, so disabling BHs is necessary. Reported-and-tested-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> 04 June 2008, 16:58:27 UTC
d2ee3f2 Dong Wei 04 June 2008, 16:57:51 UTC netfilter: xt_connlimit: fix accouning when receive RST packet in ESTABLISHED state In xt_connlimit match module, the counter of an IP is decreased when the TCP packet is go through the chain with ip_conntrack state TW. Well, it's very natural that the server and client close the socket with FIN packet. But when the client/server close the socket with RST packet(using so_linger), the counter for this connection still exsit. The following patch can fix it which is based on linux-2.6.25.4 Signed-off-by: Dong Wei <dwei.zh@gmail.com> Acked-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net> 04 June 2008, 16:57:51 UTC
ab32cd7 Thomas Graf 03 June 2008, 23:37:33 UTC route: Remove unused ifa_anycast field The field was supposed to allow the creation of an anycast route by assigning an anycast address to an address prefix. It was never implemented so this field is unused and serves no purpose. Remove it. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 03 June 2008, 23:37:33 UTC
bc3ed28 Thomas Graf 03 June 2008, 23:36:54 UTC netlink: Improve returned error codes Make nlmsg_trim(), nlmsg_cancel(), genlmsg_cancel(), and nla_nest_cancel() void functions. Return -EMSGSIZE instead of -1 if the provided message buffer is not big enough. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 03 June 2008, 23:36:54 UTC
1f9d11c Thomas Graf 03 June 2008, 23:36:27 UTC route: Mark unused routing attributes as such Also removes an unused policy entry for an attribute which is only used in kernel->user direction. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 03 June 2008, 23:36:27 UTC
51b77ca Thomas Graf 03 June 2008, 23:36:01 UTC route: Mark unused route cache flags as such. Also removes an obsolete check for the unused flag RTCF_MASQ. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 03 June 2008, 23:36:01 UTC
7557af2 Brice Goglin 03 June 2008, 23:07:45 UTC net_dma: remove duplicate assignment in dma_skb_copy_datagram_iovec No need to compute copy twice in the frags loop in dma_skb_copy_datagram_iovec(). Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 June 2008, 23:07:45 UTC
b9f5f52 Stephen Hemminger 03 June 2008, 23:03:15 UTC net: neighbour table ABI problem The neighbor table time of last use information is returned in the incorrect unit. Kernel to user space ABI's need to use USER_HZ (or milliseconds), otherwise the application has to try and discover the real system HZ value which is problematic. Linux has standardized on keeping USER_HZ consistent (100hz) even when kernel is running internally at some other value. This change is small, but it breaks the ABI for older version of iproute2 utilities. But these utilities are already broken since they are looking at the psched_hz values which are completely different. So let's just go ahead and fix both kernel and user space. Older utilities will just print wrong values. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 June 2008, 23:03:15 UTC
57c511d Adrian Bunk 03 June 2008, 23:00:01 UTC bridge: update URL This patch updates the URL of the bridge homepage. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 03 June 2008, 23:00:01 UTC
9ecad87 Pavel Emelyanov 03 June 2008, 22:18:36 UTC irda: Sock leak on error path in irda_create. Bad type/protocol specified result in sk leak. Fix is simple - release the sk if bad values are given, but to make it possible just to call sk_free(), I move some sk initialization a bit lower. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net> 03 June 2008, 22:18:36 UTC
7dccf1f Jarek Poplawski 03 June 2008, 21:53:46 UTC ax25: Fix NULL pointer dereference and lockup. From: Jarek Poplawski <jarkao2@gmail.com> There is only one function in AX25 calling skb_append(), and it really looks suspicious: appends skb after previously enqueued one, but in the meantime this previous skb could be removed from the queue. This patch Fixes it the simple way, so this is not fully compatible with the current method, but testing hasn't shown any problems. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> 03 June 2008, 21:53:46 UTC
537d59a Dave Young 02 June 2008, 06:50:52 UTC bluetooth: rfcomm_dev_state_change deadlock fix There's logic in __rfcomm_dlc_close: rfcomm_dlc_lock(d); d->state = BT_CLOSED; d->state_changed(d, err); rfcomm_dlc_unlock(d); In rfcomm_dev_state_change, it's possible that rfcomm_dev_put try to take the dlc lock, then we will deadlock. Here fixed it by unlock dlc before rfcomm_dev_get in rfcomm_dev_state_change. why not unlock just before rfcomm_dev_put? it's because there's another problem. rfcomm_dev_get/rfcomm_dev_del will take rfcomm_dev_lock, but in rfcomm_dev_add the lock order is : rfcomm_dev_lock --> dlc lock so I unlock dlc before the taken of rfcomm_dev_lock. Actually it's a regression caused by commit 1905f6c736cb618e07eca0c96e60e3c024023428 ("bluetooth : __rfcomm_dlc_close lock fix"), the dlc state_change could be two callbacks : rfcomm_sk_state_change and rfcomm_dev_state_change. I missed the rfcomm_sk_state_change that time. Thanks Arjan van de Ven <arjan@linux.intel.com> for the effort in commit 4c8411f8c115def968820a4df6658ccfd55d7f1a ("bluetooth: fix locking bug in the rfcomm socket cleanup handling") but he missed the rfcomm_dev_state_change lock issue. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net> 03 June 2008, 21:27:17 UTC
c3b25b3 Linus Torvalds 02 June 2008, 22:30:44 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] cts: Init SG tables 02 June 2008, 22:30:44 UTC
28928b2 Linus Torvalds 02 June 2008, 22:28:45 UTC Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: [PATCH 3/3] ocfs2/net: Silence build warnings [PATCH 2/3] ocfs2/dlm: Silence build warnings [PATCH 1/3] ocfs2/net: Silence build warnings ocfs2: Rename 'user_stack' plugin structure to 'ocfs2_user_plugin' 02 June 2008, 22:28:45 UTC
63e1462 Anton Vorontsov 01 June 2008, 09:49:32 UTC mmc_spi: mmc_spi.h should include linux/interrupts.h Since mmc_spi.h uses irqreturn_t type, it should include appropriate header, otherwise build will break if users didn't include it (some of them do not use interrupts). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2008, 22:27:10 UTC
b09916e Linus Torvalds 02 June 2008, 22:26:02 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes * git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: fix $(src) assignmnet with external modules 02 June 2008, 22:26:02 UTC
00e98a9 Linus Torvalds 02 June 2008, 22:25:27 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: 8250 Serial Driver: revert extra IRQ flag definition patch Blackfin arch: update anomaly headers from toolchain trunk Blackfin arch: Remove bad and usless code Blackfin arch: Fix bug - set corret SSEL and IRQ to enable AD7877 on BF527 Blackfin arch: Fix typo. it should be _outsw_8 Blackfin arch: Cleanup no functional changes 02 June 2008, 22:25:27 UTC
f365ad5 Linus Torvalds 02 June 2008, 22:25:03 UTC Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix DMA nodes in the MPC8610 HPCD device tree [POWERPC] Export empty_zero_page and copy_page in arch/ppc [POWERPC] Add "memory" clobber to MMIO accessors [POWERPC] pasemi: update pasemi_defconfig, enable electra_cf electra_cf: Add MODULE_DEVICE_TABLE() 02 June 2008, 22:25:03 UTC
c4913c7 Alexey Dobriyan 02 June 2008, 05:46:51 UTC [CRYPTO] cts: Init SG tables Steps to reproduce: modprobe tcrypt # with CONFIG_DEBUG_SG=y testing cts(cbc(aes)) encryption test 1 (128 bit key): ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:65! invalid opcode: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Modules linked in: tea xts twofish twofish_common tcrypt(+) [maaaany] Pid: 16151, comm: modprobe Not tainted 2.6.26-rc4-fat #7 RIP: 0010:[<ffffffffa0bf032e>] [<ffffffffa0bf032e>] :cts:cts_cbc_encrypt+0x151/0x355 RSP: 0018:ffff81016f497a88 EFLAGS: 00010286 RAX: ffffe20009535d58 RBX: ffff81016f497af0 RCX: 0000000087654321 RDX: ffff8100010d4f28 RSI: ffff81016f497ee8 RDI: ffff81016f497ac0 RBP: ffff81016f497c38 R08: 0000000000000000 R09: 0000000000000011 R10: ffffffff00000008 R11: ffff8100010d4f28 R12: ffff81016f497ac0 R13: ffff81016f497b30 R14: 0000000000000010 R15: 0000000000000010 FS: 00007fac6fa276f0(0000) GS:ffffffff8060e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f12ca7cc000 CR3: 000000016f441000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 Process modprobe (pid: 16151, threadinfo ffff81016f496000, task ffff8101755b4ae0) Stack: 0000000000000001 ffff81016f496000 ffffffff80719f78 0000000000000001 0000000000000001 ffffffff8020c87c ffff81016f99c918 20646c756f772049 65687420656b696c 0000000000000020 0000000000000000 0000000033341102 Call Trace: [<ffffffff8020c87c>] ? restore_args+0x0/0x30 [<ffffffffa04aa311>] ? :aes_generic:crypto_aes_expand_key+0x311/0x369 [<ffffffff802ab453>] ? check_object+0x15a/0x213 [<ffffffff802aad22>] ? init_object+0x6e/0x76 [<ffffffff802ac3ae>] ? __slab_free+0xfc/0x371 [<ffffffffa0bf05ed>] :cts:crypto_cts_encrypt+0xbb/0xca [<ffffffffa07108de>] ? :crypto_blkcipher:setkey+0xc7/0xec [<ffffffffa07110b8>] :crypto_blkcipher:async_encrypt+0x38/0x3a [<ffffffffa2ce9341>] :tcrypt:test_cipher+0x261/0x7c6 [<ffffffffa2cfd9df>] :tcrypt:tcrypt_mod_init+0x9df/0x1b30 [<ffffffff80261e35>] sys_init_module+0x9e/0x1b2 [<ffffffff8020c15a>] system_call_after_swapgs+0x8a/0x8f Code: 45 c0 e8 aa 24 63 df 48 c1 e8 0c 48 b9 00 00 00 00 00 e2 ff ff 48 8b 55 88 48 6b c0 68 48 01 c8 b9 21 43 65 87 48 39 4d 80 74 04 <0f> 0b eb fe f6 c2 01 74 04 0f 0b eb fe 83 e2 03 4c 89 ef 44 89 RIP [<ffffffffa0bf032e>] :cts:cts_cbc_encrypt+0x151/0x355 RSP <ffff81016f497a88> ---[ end trace e8bahiarjand37fd ]--- Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 02 June 2008, 05:46:51 UTC
96d97f2 Sam Ravnborg 31 May 2008, 20:28:40 UTC kbuild: fix $(src) assignmnet with external modules When we introduced support for KBUILD_EXTRA_SYMBOLS we started to include the externam module's kbuild file when doing the final modpost step. As external modules often do: ccflags-y := -I$(src) We had problems because $(src) was unassinged and gcc then used the next parameter for -I resulting in strange build failures. Fix is to assign $(src) and $(obj) when building external modules. This fixes: http://bugzilla.kernel.org/show_bug.cgi?id=10798 Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tvrtko <tvrtko.ursulin@sophos.com> Cc: Andrea Arcangeli <andrea@qumranet.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> 31 May 2008, 20:28:40 UTC
a4ed1e4 Bryan Wu 31 May 2008, 08:10:04 UTC 8250 Serial Driver: revert extra IRQ flag definition patch As Russell pointed out, original patch will break some serial configurations because of the dependency of the <asm/serial.h> header file. Revert it first and try to find out other solution later Cc: Javier Herrero <jherrero@hvsistemas.es> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Signed-off-by: Bryan Wu <cooloney@kernel.org> 31 May 2008, 08:10:04 UTC
a70ce07 Mike Frysinger 31 May 2008, 07:47:17 UTC Blackfin arch: update anomaly headers from toolchain trunk Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 31 May 2008, 07:47:17 UTC
b06dcee Michael Hennerich 31 May 2008, 07:35:40 UTC Blackfin arch: Remove bad and usless code Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 31 May 2008, 07:35:40 UTC
2eb74ae Bryan Wu 31 May 2008, 07:17:25 UTC Blackfin arch: Fix bug - set corret SSEL and IRQ to enable AD7877 on BF527 AD7877 use SSEL_2 (P9.9) and IRQ_PF8 (P9.14) on BF527 - populating JP3 to enable STAMP - disable SW11.2 to disconnect SSEL_2/PF12 from Rotary NAND - disable SW18.1 to disconnect SSEL_2 from MAX1233 touchscreen chip Signed-off-by: Bryan Wu <cooloney@kernel.org> 31 May 2008, 07:17:25 UTC
9c8b28c Timur Tabi 30 May 2008, 22:12:05 UTC [POWERPC] Fix DMA nodes in the MPC8610 HPCD device tree The node for DMA2 in the MPC8610 HPCD device tree has the wrong compatible properties. This breaks the DMA driver and the sound driver. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 May 2008, 07:08:29 UTC
6907fa2 Tony Breeds 28 May 2008, 00:52:19 UTC [POWERPC] Export empty_zero_page and copy_page in arch/ppc Currently ext4 and fuse fail to link if modular: ERROR: "copy_page" [fs/fuse/fuse.ko] undefined! ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined! make[3]: *** [__modpost] Error 1 make[2]: *** [modules] Error 2 make[1]: *** [sub-make] Error 2 While arch ppc exists it may as well compile, so this exports those symbols (which are already exported in arch/powerpc). Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 May 2008, 07:08:28 UTC
cfab3bd Benjamin Herrenschmidt 28 May 2008, 00:18:17 UTC [POWERPC] Add "memory" clobber to MMIO accessors Gcc might re-order MMIO accessors vs. surrounding consistent memory accesses, which is a "bad thing", and could break drivers. This fixes it by adding a "memory" clobber to the MMIO accessors, which should prevent gcc from doing that reordering. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 May 2008, 07:08:28 UTC
56997fa Grant Grundler 12 May 2008, 06:37:51 UTC [netdrvr] tulip: oops in tulip_interrupt when hibernating with swsusp/suspend2 The following patch is seems to fix the tulip suspend/resume panic: http://bugzilla.kernel.org/show_bug.cgi?id=8952#c46 My attempts at a cleaner patch failed and Pavel thinks this is OK. Original from: kernelbugs@tap.homeip.net Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 May 2008, 02:10:11 UTC
aefdbf1 Alexey Dobriyan 22 May 2008, 22:00:25 UTC atl1: fix 4G memory corruption bug When using 4+ GB RAM and SWIOTLB is active, the driver corrupts memory by writing an skb after the relevant DMA page has been unmapped. Although this doesn't happen when *not* using bounce buffers, clearing the pointer to the DMA page after unmapping it fixes the problem. http://marc.info/?t=120861317000005&r=2&w=2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 May 2008, 02:07:25 UTC
08722bc Li Yang 23 May 2008, 10:11:27 UTC ucc_geth_ethtool: Add a missing HW stats counter Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 May 2008, 02:07:24 UTC
25f03dc Joakim Tjernlund 23 May 2008, 10:11:26 UTC ucc_geth_ethtool: Fix typo Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 May 2008, 02:07:23 UTC
11a3a15 Rusty Russell 26 May 2008, 07:48:13 UTC virtio: fix delayed xmit of packet and freeing of old packets. Because we cache the last failed-to-xmit packet, if there are no packets queued behind that one we may never send it (reproduced here as TCP stalls, "cured" by an outgoing ping). Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 May 2008, 02:07:21 UTC
7eb2e25 Rusty Russell 26 May 2008, 07:42:42 UTC virtio: fix virtio_net xmit of freed skb bug If we fail to transmit a packet, we assume the queue is full and put the skb into last_xmit_skb. However, if more space frees up before we xmit it, we loop, and the result can be transmitting the same skb twice. Fix is simple: set skb to NULL if we've used it in some way, and check before sending. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 May 2008, 02:07:20 UTC
d399cf8 Brice Goglin 28 May 2008, 07:10:01 UTC myri10ge: update driver version Update myri10ge version to 1.3.99-1.347. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 May 2008, 02:07:19 UTC
6f94f70 Cesar Eduardo Barros 30 May 2008, 00:58:36 UTC sc92031: remove bogus unlikely() Commit 5a0a92e67b5009a71e011658da04fb92dad8961f mentions len < ETH_ZLEN is true for ARP packets. This obviously is not unlikely. Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 May 2008, 02:07:17 UTC
17a9440 Wang Chen 30 May 2008, 03:18:55 UTC [netdrvr] CS89X0: Add cleanup for dma after fail After request_dma() succeeding, any error path should do free_dma(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 May 2008, 02:07:11 UTC
b055629 Ben Hutchings 30 May 2008, 21:18:35 UTC [netdrvr] sfc: Report XAUI link down at default log level This is normal when the external link is down so don't report it as an error. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 31 May 2008, 02:06:47 UTC
61ac7bf Linus Torvalds 30 May 2008, 22:39:05 UTC Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.c [libata] sata_fsl: Fix broken driver, add port multiplier (PMP) support libata: SRST can't be trusted on PMP sil3726 libata: fix libata-scsi kernel-doc notation ata: Convert to static DEFINE_SPINLOCK(lock) ata_piix: fix macbook ich8m problems sata_mv: implement SoC guideline SATA_S11 sata_mv: workaround for 60x1 errata sata13 sata_mv: nuke unreleased GenIIe revisions sata_mv: PHY_MODEx errata fixes sata_mv: move SOC_FLAG to hpriv 30 May 2008, 22:39:05 UTC
0f475b2 Sunil Mushran 13 May 2008, 01:31:37 UTC [PATCH 3/3] ocfs2/net: Silence build warnings This patch silences the build warnings concerning o2net_init_nst() and friends when building without CONFIG_DEBUG_FS enabled. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com> 30 May 2008, 22:15:12 UTC
959040c Sunil Mushran 13 May 2008, 01:31:36 UTC [PATCH 2/3] ocfs2/dlm: Silence build warnings This patch silences the build warnings concerning dlm_debug_init() and friends when building without CONFIG_DEBUG_FS enabled. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com> 30 May 2008, 22:15:10 UTC
271d772 Sunil Mushran 13 May 2008, 01:31:35 UTC [PATCH 1/3] ocfs2/net: Silence build warnings This patch silences the build warnings concerning o2net_debugfs_init() and friends when building without CONFIG_DEBUG_FS enabled. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com> 30 May 2008, 22:15:04 UTC
a12630b Joel Becker 10 May 2008, 01:49:29 UTC ocfs2: Rename 'user_stack' plugin structure to 'ocfs2_user_plugin' The static structure describing the userspace cluster plugin for ocfs2 was named 'user_stack', which is a real pain when people are grep(1)ing the tree for the program stack object 'user_stack'. Change the name to something distinct and namespaced. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com> 30 May 2008, 22:14:08 UTC
14d03fd Linus Torvalds 30 May 2008, 21:02:21 UTC Mark 'scripts/decodecode' executable .. because it is. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 May 2008, 21:02:21 UTC
ab8cd81 Linus Torvalds 30 May 2008, 17:20:03 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: notify on empty virtio: force callback on empty. virtio_blk: fix endianess annotations virtio_config: fix len calculation of config elements virtio_net: another race with virtio_net and enable_cb virtio: An entropy device, as suggested by hpa. virtio_blk: allow read-only disks lguest: fix ugly <NULL> in /proc/interrupts virtio: set device index in common code. virtio: virtio_pci should not set bus_id. virtio: bus_id for devices should contain 'virtio' Fix crash in virtio_blk during modprobe ; rmmod ; modprobe lguest: use ioremap_cache, not ioremap 30 May 2008, 17:20:03 UTC
f8356ed Linus Torvalds 30 May 2008, 17:18:02 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: fix rpadlpar pci hotplug driver sysfs usage 30 May 2008, 17:18:02 UTC
7536d7b Linus Torvalds 30 May 2008, 17:17:19 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: rename SW_RADIO to SW_RFKILL_ALL Input: gtco - fix double kfree in error handling path Input: pxa27x_keypad - miscellaneous fixes Input: atkbd - mark keyboard as disabled when suspending/unloading Input: apanel - remove duplicate include Input: wm9713 - support five wire panels Input: wm97xx-core - fix race on PHY init Input: wm97xx-core - fix driver name Input: wm97xx-core - report a phys for WM97xx touchscreens Input: i8042 - make sure Dritek quirk is invoked at resume Input: i8042 - add Dritek quirk for Acer TravelMate 660 30 May 2008, 17:17:19 UTC
57f50ca Ingo Molnar 30 May 2008, 15:02:50 UTC drivers/watchdog/geodewdt.c: build fix * Wim Van Sebroeck <wim@iguana.be> wrote: > Author: Jordan Crouse <jordan.crouse@amd.com> > Date: Mon Jan 21 10:07:00 2008 -0700 > > [WATCHDOG] Add a watchdog driver based on the CS5535/CS5536 MFGPT timers -tip testing found the following build failure on latest -git: drivers/watchdog/geodewdt.c: In function 'geodewdt_probe': drivers/watchdog/geodewdt.c:225: error: too many arguments to function 'geode_mfgpt_alloc_timer' make[1]: *** [drivers/watchdog/geodewdt.o] Error 1 make: *** [drivers/watchdog/geodewdt.o] Error 2 with this config: http://redhat.com/~mingo/misc/config-Fri_May_30_15_19_52_CEST_2008.bad find the fix below. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 May 2008, 17:16:58 UTC
a9b841e Benjamin Herrenschmidt 30 May 2008, 03:39:12 UTC PCI: fix rpadlpar pci hotplug driver sysfs usage When Greg "fixed" the sysfs usage of that driver a while back, he seem to have introduced a bug where the quotes are added around the name of our specific sysfs files, thus breaking the user space tool. This fixes it. Tested DLPAR operations on a POWER6 machine successfully. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> 30 May 2008, 16:50:46 UTC
3072c37 peerchen 19 May 2008, 06:44:57 UTC ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.c Change the partial Device IDs of nvidia MCP7B AHCI controller in ahci.c, as the actual PCI IDs deployed in the field differed from the forecasted ones preemptively placed in the driver. Signed-off-by: Peer Chen <peerchen@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:40:28 UTC
034d8e8 Ashish Kalra 20 May 2008, 05:19:45 UTC [libata] sata_fsl: Fix broken driver, add port multiplier (PMP) support The following commit (4c9bf4e799ce06a7378f1196587084802a414c03): libata: replace tf_read with qc_fill_rtf for non-SFF drivers Broke the sata_fsl.c driver in 2.6.26-rc. I know the following patch fixes the issue, it clearly also adds port multipler support. The current 2.6.26-rc driver is broken. On boot with debug enabled we get something like (w/o this patch): spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 .. continues for ever. This change fixes this as a side effect of adding port multiplier support. Signed-off-by: Ashish Kalra <ashish.kalra@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:39:44 UTC
19ef9d5 Tejun Heo 21 May 2008, 05:11:24 UTC libata: SRST can't be trusted on PMP sil3726 As in sil4726, SRST can't be trusted on sil3726 causing detection problems under certain configuraitons. I thought it was from the Config Disk device but apparently not. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:56 UTC
ec2a20e Randy Dunlap 30 April 2008, 19:57:00 UTC libata: fix libata-scsi kernel-doc notation Fix libata-scsi kernel-doc notation: Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1659): No description found for parameter 'cmd' Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1971): No description found for parameter 'buf' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:50 UTC
2da6765 Pradeep Singh Rautela 29 May 2008, 17:58:14 UTC ata: Convert to static DEFINE_SPINLOCK(lock) Replace deprecated static spinlock_t instance to static DEFINE_SPINLOCK(lock). Signed-off-by: Pradeep Singh <rautelap@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:43 UTC
23cf296 Tejun Heo 29 May 2008, 13:04:22 UTC ata_piix: fix macbook ich8m problems ICH8M on macbooks are peculiar in that some of them lock up when the second port is enabled, some return bogus values on SIDPR access while yet others hang on SIDPR access. Also, the ich8m_apple_sata entry was wrongly added below generic ich8m entry making it virtually useless. This patch works around macbook ich8m problems by * moving ich8m_apple_sata entry above generic ich8m entry * dropping PIIX_FLAG_SIDPR from ich8m_apple_sata * adding subsystem 106b:00a1 as ich8m_apple_sata Reported and tested by MATSUBAYASHI. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: MATSUBAYASHI 'Shaolin' Kohji <shaolin@rhythmaning.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:29 UTC
0388a8c Mark Lord 28 May 2008, 17:41:52 UTC sata_mv: implement SoC guideline SATA_S11 The 5182 System-On-Chip (SOC) variant wants certain lower bits to be cleared on any write to the PHY_MODE3 register. If/when support is added for other SOC variants, we'll need some way to uniquely identify the 5182, and not perform this workaround for the others. But for now, it is the only SOC variant we support here. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:26 UTC
b406c7a Mark Lord 28 May 2008, 16:01:12 UTC sata_mv: workaround for 60x1 errata sata13 The "B2" variant of the 6041/6081 (genII) chips requires that the PHY_MODE3 register be rewritten after any write to PHY_MODE4. This fixes a regression introduced by an earlier patch. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:24 UTC
5cf73bf Mark Lord 27 May 2008, 21:58:56 UTC sata_mv: nuke unreleased GenIIe revisions The only public release of the 6042/7042 chips was/is revision "B0". Remove code that attempted to deal with earlier, non-released revs. This matches the logic of the current Marvell "proprietary" driver. Also, bump up the sata_mv version number, to reflect this batch of erratas. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:23 UTC
8c30a8b Mark Lord 27 May 2008, 21:56:31 UTC sata_mv: PHY_MODEx errata fixes Fix and update the errata handling for the PHY_MODEx registers. This improves receiver noise tolerance, among other things. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:21 UTC
1f39847 Mark Lord 27 May 2008, 21:54:48 UTC sata_mv: move SOC_FLAG to hpriv Convert the System-on-Chip flag from a host flag to an hpriv flag, for better consistency with other chip-rev flags, and for easier use in errata fixes etc. Also change the related "HAS_PCI()" into "!IS_SOC()" for better consistency of naming/use (everything else SOC-related already uses "SOC"). There are no functionality changes in this patch. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:20 UTC
1beee8d Linus Torvalds 30 May 2008, 14:45:20 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits) llc: Fix double accounting of received packets netfilter: nf_conntrack_expect: fix error path unwind in nf_conntrack_expect_init() bluetooth: fix locking bug in the rfcomm socket cleanup handling mac80211: fix alignment issue with compare_ether_addr() mac80211: Fix for NULL pointer dereference in sta_info_get() mac80211: fix a typo in ieee80211_handle_filtered_frame comment rndis_wlan: add missing range check for power_output modparam iwlwifi: fix rate scale TLC column selection bug iwlwifi: fix exit from stay_in_table state rndis_wlan: Make connections to TKIP PSK networks work mac80211 : Fixes the status message for iwconfig rt2x00: Use atomic interface iteration in irq context rt2x00: Reset antenna RSSI after switch rt2x00: Don't count retries as failure rt2x00: Fix memleak in tx() path mac80211: reorder channel and freq reporting in wext scan report b43: Fix controller restart crash mac80211: fix ieee80211_rx_bss_put/get imbalance net/mac80211: always true conditionals b43: Upload both beacon templates on initial load ... 30 May 2008, 14:45:20 UTC
9db8ee3 Linus Torvalds 30 May 2008, 14:44:19 UTC Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] Update default configuration. [S390] disassembler: fix idte instruction format. [S390] tape: fix race with stack local wait_queue_head_t. [S390] 3270: fix race with stack local wait_queue_head_t. [S390] dasd: use a generic wait_queue for sleep_on [S390] sclp_vt220: fix scheduling while atomic bug. [S390] showmem: Only walk spanned pages. [S390] appldata: prevent cpu hotplug when walking cpu_online_map. [S390] Fix section mismatch warnings. [S390] s390 types: make dma_addr_t 64 bit capable [S390] tape: Fix race condition in tape block device driver [S390] fix sparsemem related compile error with allnoconfig on s390 30 May 2008, 14:44:19 UTC
e3aa51f Harvey Harrison 30 May 2008, 00:51:57 UTC acpi: fix sparse const errors In this case we want a constant pointer to constant chars: drivers/misc/thinkpad_acpi.c:3824:19: error: Just how const do you want this type to be? Like the error says. drivers/misc/thinkpad_acpi.c:3863:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3864:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3865:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3866:19: error: Just how const do you want this type to be? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 May 2008, 14:43:24 UTC
5adad01 Henrique de Moraes Holschuh 30 May 2008, 14:40:46 UTC Input: rename SW_RADIO to SW_RFKILL_ALL The SW_RADIO code for EV_SW events has a name that is not descriptive enough of its intended function, and could induce someone to think KEY_RADIO is its EV_KEY counterpart, which is false. Rename it to SW_RFKILL_ALL, and document what this event is for. Keep the old name around, to avoid userspace ABI breaks. The SW_RFKILL_ALL event is meant to be used by rfkill master switches. It is not bound to a particular radio switch type, and usually applies to all types. It is semantically tied to master rfkill switches that enable or disable every radio in a system. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 30 May 2008, 14:40:46 UTC
501a525 Dmitry Torokhov 30 May 2008, 14:40:28 UTC Input: gtco - fix double kfree in error handling path The code would try to free 'report' twice upon input_register_device() failure. Reported-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 30 May 2008, 14:40:28 UTC
3446b9d Arnaldo Carvalho de Melo 30 May 2008, 09:57:29 UTC llc: Fix double accounting of received packets llc_sap_rcv was being preceded by skb_set_owner_r, then calling llc_state_process that calls sock_queue_rcv_skb, that in turn calls skb_set_owner_r again making the space allowed to be used by the socket to be leaked, making the socket to get stuck. Fix it by setting skb->sk at llc_sap_rcv and leave the accounting to be done only at sock_queue_rcv_skb. Reported-by: Dmitry Petukhov <dmgenp@gmail.com> Tested-by: Dmitry Petukhov <dmgenp@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 May 2008, 09:57:29 UTC
0066ed5 Martin Schwidefsky 30 May 2008, 08:03:35 UTC [S390] Update default configuration. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:36 UTC
209fb90 Martin Schwidefsky 30 May 2008, 08:03:34 UTC [S390] disassembler: fix idte instruction format. The correct instruction format of idte is "idte r1,r3,r2" with r1 at bit 24, r3 at bit 16 and r2 at bit 28. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:36 UTC
4657fb8 Martin Schwidefsky 30 May 2008, 08:03:33 UTC [S390] tape: fix race with stack local wait_queue_head_t. A wait_event call with a stack local wait_queue_head_t structure that is used to do the wake up for the wait_event is inherently racy. After the wait_event finished the wake_up call might not have completed yet. Replace the stack local wait_queue_head_t in tape_do_io and tape_do_io_interruptible with a per device wait queue. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:36 UTC
54ad641 Martin Schwidefsky 30 May 2008, 08:03:32 UTC [S390] 3270: fix race with stack local wait_queue_head_t. A wait_event call with a stack local wait_queue_head_t structure that is used to do the wake up for the wait_event is inherently racy. After the wait_event finished the wake_up call might not have completed yet. Remove the stack local wait_queue_head_t from raw3270_start_init and use the global raw3270_wait_queue instead. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:35 UTC
c80ee72 Stefan Haberland 30 May 2008, 08:03:31 UTC [S390] dasd: use a generic wait_queue for sleep_on Use a generic wait_queue to prevent the wait_queue in dasd_sleep_on_ functions from being referenced by callback_data while it does not exist any more. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:35 UTC
d4820e4 Heiko Carstens 30 May 2008, 08:03:30 UTC [S390] sclp_vt220: fix scheduling while atomic bug. The driver incorrectly assumed that putchar will only be called from schedulable process context and therefore blocked and waited if no free output buffers where available. Since putchar may also be called from BH context this may lead to deadlocks. To fix this just return the number of characters accepted and let the upper layer handle the rest. The console write function will busy wait (sclp_sync_wait) until a buffer is available again. Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:35 UTC
c1bb7f3 Heiko Carstens 30 May 2008, 08:03:29 UTC [S390] showmem: Only walk spanned pages. Convert show_mem() so its nearly the same as on x86/powerpc. Gives us proper locking and we get also rid of the only use of max_mapnr. Also the number of pages was contained in an int which might not be sufficient not too far in the future. Cc: Johannes Weiner <hannes@saeurebad.de> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:34 UTC
1760537 Gerald Schaefer 30 May 2008, 08:03:28 UTC [S390] appldata: prevent cpu hotplug when walking cpu_online_map. Use get_online_cpus() to prevent cpu hotplug in situations where for_each_online_cpu() is called. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:34 UTC
67060d9 Heiko Carstens 30 May 2008, 08:03:27 UTC [S390] Fix section mismatch warnings. This fixes the last remaining section mismatch warnings in s390 architecture code. It reveals also a real bug introduced by... me with git commit 2069e978d5a6e7b45d58027e3de7f879b8c5e488 ("[S390] sparsemem vmemmap: initialize memmap.") Calling the generic vmemmap_alloc_block() function to get initialized memory is a nice idea, however that function is __meminit annotated and therefore the function might be gone if we try to call it later. This can happen if a DCSS segment gets added. So basically revert the patch and clear the memmap explicitly to fix the original bug. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:34 UTC
bebd9a4 Christian Borntraeger 30 May 2008, 08:03:26 UTC [S390] s390 types: make dma_addr_t 64 bit capable virtio tests with guests larger than 4 GB revealed that the dma_addr_t definition for s390 did not make it into the 64bit world. This patch changes the definition on s390 to have an u64 on 64bit and u32 on 32bit systems. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:33 UTC
f71ad62 Michael Holzheu 30 May 2008, 08:03:25 UTC [S390] tape: Fix race condition in tape block device driver Due to incorrect function call sequence it can happen that a tape block request is finished before the request is taken from the block request queue. The following sequence leads to that condition: * tapeblock_start_request() -> start CCW program * Request finishes -> IO interrupt * tapeblock_end_request() * end_that_request_last() If blkdev_dequeue_request() has not been called before end_that_request_last(), a kernel bug is triggered in end_that_request_last() because the request is still queued. To solve that problem blkdev_dequeue_request() has to be called before starting the CCW program. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:33 UTC
97195d6 Hans-Joachim Picht 30 May 2008, 08:03:24 UTC [S390] fix sparsemem related compile error with allnoconfig on s390 On s390 make allnoconfig fails with the following build error: arch/s390/mm/init.c: In function 'show_mem': arch/s390/mm/init.c:55: error: implicit declaration of function 'pfn_valid' make[1]: *** [arch/s390/mm/init.o] Error 1 make: *** [arch/s390/mm] Error 2 This problem can by fixed ensuring that ARCH_SELECT_MEMORY_MODEL is always turned on. Signed-off-by: Hans-Joachim Picht <hans@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:33 UTC
2088761 Rusty Russell 30 May 2008, 20:09:46 UTC lguest: notify on empty This is the lguest implementation of the VIRTIO_F_NOTIFY_ON_EMPTY feature. It is currently only published for network devices, but it is turned on for everyone. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 30 May 2008, 05:09:46 UTC
b4f68be Rusty Russell 30 May 2008, 20:09:45 UTC virtio: force callback on empty. virtio allows drivers to suppress callbacks (ie. interrupts) for efficiency (no locking, it's just an optimization). There's a similar mechanism for the host to suppress notifications coming from the guest: in that case, we ignore the suppression if the ring is completely full. It turns out that life is simpler if the host similarly ignores callback suppression when the ring is completely empty: the network driver wants to free up old packets in a timely manner, and otherwise has to use a timer to poll. We have to remove the code which ignores interrupts when the driver has disabled them (again, it had no locking and hence was unreliable anyway). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> 30 May 2008, 05:09:46 UTC
back to top