Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
ad24094 Takashi Iwai 17 June 2011, 12:23:46 UTC ALSA: hda - Fix no NID error with VIA codecs The via driver spews warnigs like hda-codec: no NID for mapping control Independent HP:0:0 with some codecs because snd_hda_add_nid() is called with nid=0. This patch fixes it by skipping the call when no corresponding widget is found. Signed-off-by: Takashi Iwai <tiwai@suse.de> 17 June 2011, 12:23:46 UTC
cf6f1ff Clemens Ladisch 17 June 2011, 06:18:35 UTC ALSA: isight: adjust for new queueing API Since commit 13882a82ee16 (optimize iso queueing by setting wake only after the last packet), drivers are required to call fw_iso_context_queue_flush() after queueing a batch of packets. The missing call would have an effect only if the controller queue underruns, but then the DMA would stop completely. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 17 June 2011, 09:37:29 UTC
0ec5258 Torsten Schenk 16 June 2011, 19:06:27 UTC ALSA: 6fire - Fix signedness bug Fixed remaining issues of the signedness bug discovered by Dan Carpenter. A check was remaining that tests if unsigned rt->rate is >= 0. Changed that so that rt->rate now consistently uses ARRAY_SIZE(rates) as invalid rate value and not -1. Signed-off-by: Torsten Schenk <torsten.schenk@zoho.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 16 June 2011, 19:31:33 UTC
e72888e Takashi Iwai 15 June 2011, 13:14:49 UTC ALSA: lola - Fix section mismatch Add missing __devinit. Signed-off-by: Takashi Iwai <tiwai@suse.de> 15 June 2011, 13:14:49 UTC
ca2585a Takashi Iwai 14 June 2011, 06:14:32 UTC ALSA: hda - Fix missing static inline to beep dummy function The commit 2308f4add3de9f6c9c9f02e49461e94d84bb200a missed static inline thus it resulted in multiple-definitions error at linking. Signed-off-by: Takashi Iwai <tiwai@suse.de> 14 June 2011, 06:14:32 UTC
37f7ec3 Jesper Juhl 13 June 2011, 21:52:02 UTC ALSA: 6fire: Fix double-free bug in usb6fire_fw_ezusb_upload() We have a double-free bug in sound/usb/6fire/firmware.c::usb6fire_fw_ezusb_upload(). We already call release_firmware(fw) on line 258, so when we then do it again after usb6fire_fw_ezusb_write() returns <0, we have a double-free. Easily fixed by just removing the last call to release_firmware(). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> 14 June 2011, 05:27:26 UTC
2308f4a Joe Perches 12 June 2011, 20:02:43 UTC ALSA: hda - Fix beep_device compilation warnings Using static inline functions can reduce compilation messages and macro misuse. sound/pci/hda/patch_conexant.c: In function ‘patch_cxt5045’: sound/pci/hda/patch_conexant.c:1232:3: warning: statement with no effect Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 13 June 2011, 06:36:26 UTC
54463a6 Takashi Iwai 13 June 2011, 06:32:06 UTC ALSA: hda - Fix wrong auto-mute type for Acer Aspire-one The auto-mute setup for Acer Aspire-one with ALC268 was set wrongly during the clean-up of auto-mute function. Fixed now. Tested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 13 June 2011, 06:32:06 UTC
ac5d4b4 Florian Zeitz 11 June 2011, 23:15:42 UTC ALSA: emu10k1: Add details for E-mu 0404 PCIe version This patch adds the necessary details to support the PCIe version of E-MU's 0404 card. From comparing the PCBs it seems the PCIe version just added a PCIe chipset and left all other components pretty much in place. For anyone intrigued to take a look at the PCB there are pictures I took at <http://babelmonkeys.de/~florob/E-MU%200404/>. Signed-off-by: Florian Zeitz <florob@babelmonkeys.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 12 June 2011, 19:24:17 UTC
efef054 Adrian Knoth 12 June 2011, 15:26:19 UTC ALSA: hdspm - Add firmware revision ID for RME MADI PCI version The PCI version of the RME HDSP MADI card uses 0xcf as revision ID. Just add this to the list of supported cards. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 12 June 2011, 16:50:08 UTC
fedf153 Adrian Knoth 12 June 2011, 15:26:18 UTC ALSA: hdspm - Fix jumping external wordclock frequency in AutoSync mode When using Word Clock on RME MADI cards, AutoSync mode was alternating betweeen MADI and WC due to a typo: AutoSync is indicated in the second status register (status2), not the first one (status). While the proc output was always correct, the reported WC frequency to ALSA was unstable as mentioned in http://mailman.alsa-project.org/pipermail/alsa-devel/2008-March/006723.html Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 12 June 2011, 16:49:56 UTC
c0da001 Adrian Knoth 12 June 2011, 15:26:17 UTC ALSA: hdspm - Fix locking in snd_hdspm_midi_input_read For the MIDI part, we need to acquire (and release) the hmidi->lock, access to the global hdspm structure is serialized through hmidi->hdspm->lock instead. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> 12 June 2011, 16:49:42 UTC
05e2054 Takashi Iwai 10 June 2011, 15:49:34 UTC Merge branch 'fix/asoc' into for-linus 10 June 2011, 15:49:34 UTC
7ab1fc0 Daniel T Chen 10 June 2011, 14:14:01 UTC ALSA: hda: Fix inaudible internal speakers on CyberpowerPC Gamer Xplorer N57001 laptop BugLink: https://launchpad.net/bugs/761171 The original reporter needs the model=auto quirk for his internal speakers to be audible in the latest daily snapshot, so add an entry in the quirk table for his PCI SSID. A trivially different version of this patch using the model=asus quirk should be applied to the 2.6.38 and 2.6.39 stable kernels. We don't use the asus quirk in 3.0-rc2, because 3.0-rc2's autoparser is much improved. Reported-and-tested-by: tomdeering7 Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 10 June 2011, 14:31:24 UTC
890ee02 Takashi Iwai 10 June 2011, 13:32:31 UTC ALSA: Use %pV for snd_printk() Clean up snd_printk() helper using the %pV prefix for recursive printks. This also automagically fixes an Oops with RO/NX-enabled modules. Tested-by: Maarten Lankhorst <m.b.lankhorst@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 10 June 2011, 13:35:20 UTC
c0a2026 Takashi Iwai 10 June 2011, 13:28:15 UTC ALSA: hda - Fix initialization of hp pins with master_mute in Realtek Some Reatlek model quirks use master_mute bool switch for controlling the master-mute of outputs. For these cases, the initialization of HP pins/amps were forgotten during the transition to the common automute helper function in 3.0 development time, and resulted in the muted HP output as default. This patch fixes the issue by adjusting the HP output explicitly with master_mute switch. Tested-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> 10 June 2011, 13:28:15 UTC
20f5e0b Takashi Iwai 10 June 2011, 07:31:54 UTC ALSA: hda - Fix invalid unsol tag for some alc262 model quirks The tag number was forgotten to be fixed after cleaning up the model quirks for ALC262 fujitsu and lenovo-3000 models. Tested-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> 10 June 2011, 13:27:32 UTC
3319550 Sangbeom Kim 10 June 2011, 01:36:54 UTC ASoC: SAMSUNG: Fix the incorrect referencing of I2SCON register If DMA active status should be checked, I2SCON register should be referenced. In this patch, Fix the incorrect referencing of I2SCON register. Reported-by : Lakkyung Jung <lakkyung.jung@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org 10 June 2011, 09:54:46 UTC
4b80b8c Lars-Peter Clausen 09 June 2011, 11:22:36 UTC ASoC: snd_soc_new_{mixer,mux,pga} make sure to use right DAPM context Currently it is possible that snd_soc_new_{mixer,mux,pga} is called with a DAPM context not matching the widgets context. This can lead to a wrong prefix_len calculation, which will result in undefined behaviour. To avoid this always use the DAPM context from the widget itself. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org 09 June 2011, 14:06:54 UTC
0cd114f Timur Tabi 08 June 2011, 20:02:56 UTC ASoC: fsl: fix initialization of DMA buffers The DMA (PCM) driver used by some Freescale PowerPC supports separate DAIs for playback and capture, so DMA buffers should be allocated only for the initialized streams. Instead of checking for the number of active channels, which apparently is not reliable, check to see if the actual stream object exists. Also provide a better name for the DMA interrupt. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 09 June 2011, 10:53:11 UTC
3115ae1 Mark Brown 08 June 2011, 17:07:49 UTC ASoC: WM8804 does not support sample rates below 32kHz Reported-by: Kieran O'Leary <Kieran.O'Leary@wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org 09 June 2011, 10:51:07 UTC
0f82bdf Mark Brown 07 June 2011, 22:42:04 UTC ASoC: Fix WM8962 headphone volume update for use of advanced caches Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org 08 June 2011, 14:18:17 UTC
064d58e Lars-Peter Clausen 07 June 2011, 08:24:46 UTC ASoC: Blackfin: bf5xx-ad1836: Fix codec device name Fix the codec_name field of the dai_link to match the actual device name of the codec. Otherwise the card won't be instantiated. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org 07 June 2011, 08:49:28 UTC
0a1896b Daniel T Chen 06 June 2011, 22:55:34 UTC ALSA: hda: Fix quirk for Dell Inspiron 910 BugLink: https://launchpad.net/bugs/792712 The original reporter states that sound from the internal speakers is inaudible until using the model=auto quirk. This symptom is due to an existing quirk mask for 0x102802b* that uses the model=dell quirk. To limit the possible regressions, leave the existing quirk mask but add a higher priority specific mask for the reporter's PCI SSID. Reported-and-tested-by: rodni hipp Cc: <stable@kernel.org> [2.6.38+] Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 07 June 2011, 05:26:01 UTC
8ca695f Lars-Peter Clausen 06 June 2011, 11:38:35 UTC ASoC: AD1836: Fix setting the PCM format Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org 06 June 2011, 20:55:10 UTC
fd137e2 Mark Brown 06 June 2011, 10:26:15 UTC ASoC: Check for NULL register bank in snd_soc_get_cache_val() Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> 06 June 2011, 18:34:11 UTC
6ac3406 Mark Brown 03 June 2011, 17:20:50 UTC ASoC: Add missing break in WM8915 FLL source selection Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> 06 June 2011, 11:46:52 UTC
1622ee1 Mark Brown 03 June 2011, 16:13:57 UTC ASoC: Only update SYSCLK_ENA when pausing WM8915 SYSCLK Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> 06 June 2011, 11:46:33 UTC
05d3962 Mark Brown 06 June 2011, 09:38:23 UTC Merge branch 'for-3.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-3.0 06 June 2011, 09:38:23 UTC
59c5f46 Linus Torvalds 06 June 2011, 09:06:33 UTC Linux 3.0-rc2 06 June 2011, 09:06:33 UTC
e0dcd8a Hugh Dickins 06 June 2011, 05:03:13 UTC mm: fix ENOSPC returned by handle_mm_fault() Al Viro observes that in the hugetlb case, handle_mm_fault() may return a value of the kind ENOSPC when its caller is expecting a value of the kind VM_FAULT_SIGBUS: fix alloc_huge_page()'s failure returns. Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 06 June 2011, 09:00:27 UTC
0d6925d Linus Torvalds 06 June 2011, 08:51:28 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: usb - turn off de-emphasis in s/pdif for cm6206 ALSA: asihpi: Use angle brackets for system includes ALSA: fm801: add error handling if auto-detect fails ALSA: hda - Check pin support EAPD in ad198x_power_eapd_write ALSA: hda - Fix HP and Front pins of ad1988/ad1989 in ad198x_power_eapd() ALSA: 6fire: Don't leak firmware in error path ASoC: Fix wm_hubs input PGA ZC bits ASoC: Fix dapm_is_shared_kcontrol so everything isn't shared 06 June 2011, 08:51:28 UTC
c12f667 Linus Torvalds 06 June 2011, 08:48:02 UTC Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (max6642): Better chip detection schema hwmon: (coretemp) Further relax temperature range checks hwmon: (coretemp) Fix TjMax detection for older CPUs hwmon: (coretemp) Relax target temperature range check hwmon: (max6642) Rename temp_fault sysfs attribute to temp2_fault 06 June 2011, 08:48:02 UTC
3190dad Takashi Iwai 06 June 2011, 07:28:49 UTC Merge branch 'fix/asoc' into for-linus 06 June 2011, 07:28:49 UTC
0792644 Linus Torvalds 04 June 2011, 23:11:11 UTC Merge branch 'for-linus' of git://android.git.kernel.org/kernel/tegra * 'for-linus' of git://android.git.kernel.org/kernel/tegra: ARM: Tegra: Harmony: Fix conflicting GPIO numbering 04 June 2011, 23:11:11 UTC
f2a4d8a Stephen Warren 31 May 2011, 21:14:07 UTC ARM: Tegra: Harmony: Fix conflicting GPIO numbering Currently, both the WM8903 and TPS6586x chips attempt to register with gpiolib using the same GPIO numbers. This causes the audio driver to fail to initialize. To solve this, add a define to board-harmony.h for the TPS6586x, and make board-harmony-power.c use this define, instead of directly referencing TEGRA_NR_GPIOS. This fixes a regression introduced by commit 6f168f2fa60f87e85e0df25e87e2372f22f5eb7c. ARM: tegra: harmony: initialize the TPS65862 PMIC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Colin Cross <ccross@android.com> 04 June 2011, 22:51:52 UTC
e6ece70 Linus Torvalds 04 June 2011, 21:17:23 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (25 commits) btrfs: fix uninitialized variable warning btrfs: add helper for fs_info->closing Btrfs: add mount -o inode_cache btrfs: scrub: add explicit plugging btrfs: use btrfs_ino to access inode number Btrfs: don't save the inode cache if we are deleting this root btrfs: false BUG_ON when degraded Btrfs: don't save the inode cache in non-FS roots Btrfs: make sure we don't overflow the free space cache crc page Btrfs: fix uninit variable in the delayed inode code btrfs: scrub: don't reuse bios and pages Btrfs: leave spinning on lookup and map the leaf Btrfs: check for duplicate entries in the free space cache Btrfs: don't try to allocate from a block group that doesn't have enough space Btrfs: don't always do readahead Btrfs: try not to sleep as much when doing slow caching Btrfs: kill BTRFS_I(inode)->block_group Btrfs: don't look at the extent buffer level 3 times in a row Btrfs: map the node block when looking for readahead targets Btrfs: set range_start to the right start in count_range_bits ... 04 June 2011, 21:17:23 UTC
942c1a9 Per Dalén 26 May 2011, 13:08:53 UTC hwmon: (max6642): Better chip detection schema Improve detection of MAX6642 by reading non existing registers (0x04, 0x06 and 0xff). Reading those registers returns the previously read value. Signed-off-by: Per Dalen <per.dalen@appeartv.com> [guenter.roeck@ericsson.com: added second set of register reads] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> 04 June 2011, 17:34:28 UTC
23c79d3 Linus Torvalds 04 June 2011, 14:19:51 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] Fix oops caused by queue refcounting failure 04 June 2011, 14:19:51 UTC
0e833d8 Linus Torvalds 04 June 2011, 14:16:00 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits) tg3: Fix tg3_skb_error_unmap() net: tracepoint of net_dev_xmit sees freed skb and causes panic drivers/net/can/flexcan.c: add missing clk_put net: dm9000: Get the chip in a known good state before enabling interrupts drivers/net/davinci_emac.c: add missing clk_put af-packet: Add flag to distinguish VID 0 from no-vlan. caif: Fix race when conditionally taking rtnl lock usbnet/cdc_ncm: add missing .reset_resume hook vlan: fix typo in vlan_dev_hard_start_xmit() net/ipv4: Check for mistakenly passed in non-IPv4 address iwl4965: correctly validate temperature value bluetooth l2cap: fix locking in l2cap_global_chan_by_psm ath9k: fix two more bugs in tx power cfg80211: don't drop p2p probe responses Revert "net: fix section mismatches" drivers/net/usb/catc.c: Fix potential deadlock in catc_ctrl_run() sctp: stop pending timers and purge queues when peer restart asoc drivers/net: ks8842 Fix crash on received packet when in PIO mode. ip_options_compile: properly handle unaligned pointer iwlagn: fix incorrect PCI subsystem id for 6150 devices ... 04 June 2011, 14:16:00 UTC
aa0467d David Sterba 03 June 2011, 14:29:08 UTC btrfs: fix uninitialized variable warning With Linus' tree, today's linux-next build (powercp ppc64_defconfig) produced this warning: fs/btrfs/delayed-inode.c: In function 'btrfs_delayed_update_inode': fs/btrfs/delayed-inode.c:1598:6: warning: 'ret' may be used uninitialized in this function Introduced by commit 16cdcec736cd ("btrfs: implement delayed inode items operation"). This fixes a bug in btrfs_update_inode(): if the returned value from btrfs_delayed_update_inode is a nonzero garbage, inode stat data are not updated and several call paths may hit a BUG_ON or fail with strange code. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David Sterba <dsterba@suse.cz> 04 June 2011, 12:11:38 UTC
7841cb2 David Sterba 31 May 2011, 16:07:27 UTC btrfs: add helper for fs_info->closing wrap checking of filesystem 'closing' flag and fix a few missing memory barriers. Signed-off-by: David Sterba <dsterba@suse.cz> 04 June 2011, 12:11:22 UTC
4b9465c Chris Mason 03 June 2011, 13:36:29 UTC Btrfs: add mount -o inode_cache This makes the inode map cache default to off until we fix the overflow problem when the free space crcs don't fit inside a single page. Signed-off-by: Chris Mason <chris.mason@oracle.com> 04 June 2011, 12:03:47 UTC
e7786c3 Arne Jansen 28 May 2011, 20:58:38 UTC btrfs: scrub: add explicit plugging With the removal of the implicit plugging scrub ends up doing more and smaller I/O than necessary. This patch adds explicit plugging per chunk. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com> 04 June 2011, 12:03:46 UTC
a4689d2 David Sterba 31 May 2011, 17:08:14 UTC btrfs: use btrfs_ino to access inode number commit 4cb5300bc ("Btrfs: add mount -o auto_defrag") accesses inode number directly while it should use the helper with the new inode number allocator. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@oracle.com> 04 June 2011, 12:03:46 UTC
d132a53 Josef Bacik 31 May 2011, 19:33:33 UTC Btrfs: don't save the inode cache if we are deleting this root With xfstest 254 I can panic the box every time with the inode number caching stuff on. This is because we clean the inodes out when we delete the subvolume, but then we write out the inode cache which adds an inode to the subvolume inode tree, and then when it gets evicted again the root gets added back on the dead roots list and is deleted again, so we have a double free. To stop this from happening just return 0 if refs is 0 (and we're not the tree root since tree root always has refs of 0). With this fix 254 no longer panics. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@oracle.com> 04 June 2011, 12:03:45 UTC
5f3f302 Arne Jansen 30 May 2011, 08:36:16 UTC btrfs: false BUG_ON when degraded In degraded mode the struct btrfs_device of missing devs don't have device->name set. A kstrdup of NULL correctly returns NULL. Don't BUG in this case. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Mason <chris.mason@oracle.com> 04 June 2011, 12:03:44 UTC
ca456ae liubo 01 June 2011, 09:42:49 UTC Btrfs: don't save the inode cache in non-FS roots This adds extra checks to make sure the inode map we are caching really belongs to a FS root instead of a special relocation tree. It prevents crashes during balancing operations. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> 04 June 2011, 12:03:44 UTC
211f96c Chris Mason 03 June 2011, 05:26:53 UTC Btrfs: make sure we don't overflow the free space cache crc page The free space cache uses only one page for crcs right now, which means we can't have a cache file bigger than the crcs we can fit in the first page. This adds a check to enforce that restriction. Signed-off-by: Chris Mason <chris.mason@oracle.com> 04 June 2011, 12:03:43 UTC
17aca1c Chris Mason 03 June 2011, 05:13:45 UTC Btrfs: fix uninit variable in the delayed inode code The nitems counter needs to start at zero Signed-off-by: Chris Mason <chris.mason@oracle.com> 04 June 2011, 12:03:43 UTC
1bc8779 Arne Jansen 28 May 2011, 19:57:55 UTC btrfs: scrub: don't reuse bios and pages The current scrub implementation reuses bios and pages as often as possible, allocating them only on start and releasing them when finished. This leads to more problems with the block layer than it's worth. The elevator gets confused when there are more pages added to the bio than bi_size suggests. This patch completely rips out the reuse of bios and pages and allocates them freshly for each submit. Signed-off-by: Arne Jansen <sensille@gmx.net> Signed-off-by: Chris Maosn <chris.mason@oracle.com> 04 June 2011, 12:03:17 UTC
4f1ba49 Linus Torvalds 03 June 2011, 23:11:26 UTC Merge branch 'for-linus' of git://git.kernel.dk/linux-block * 'for-linus' of git://git.kernel.dk/linux-block: block: Use hlist_entry() for io_context.cic_list.first cfq-iosched: Remove bogus check in queue_fail path xen/blkback: potential null dereference in error handling xen/blkback: don't call vbd_size() if bd_disk is NULL block: blkdev_get() should access ->bd_disk only after success CFQ: Fix typo and remove unnecessary semicolon block: remove unwanted semicolons Revert "block: Remove extra discard_alignment from hd_struct." nbd: adjust 'max_part' according to part_shift nbd: limit module parameters to a sane value nbd: pass MSG_* flags to kernel_recvmsg() block: improve the bio_add_page() and bio_add_pc_page() descriptions 03 June 2011, 23:11:26 UTC
39b4a46 Linus Torvalds 03 June 2011, 23:04:10 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: Blackfin: strncpy: fix handling of zero lengths 03 June 2011, 23:04:10 UTC
cb37bbd Linus Torvalds 03 June 2011, 23:03:16 UTC Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: asm-generic/unistd.h: support sendmmsg syscall tile: enable CONFIG_BUGVERBOSE 03 June 2011, 23:03:16 UTC
3af91a1 Linus Torvalds 03 June 2011, 22:59:32 UTC Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6 * 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix-up free space earlier UBIFS: intialize LPT earlier UBIFS: assert no fixup when writing a node UBIFS: fix clean znode counter corruption in error cases UBIFS: fix memory leak on error path UBIFS: fix shrinker object count reports UBIFS: fix recovery broken by the previous recovery fix UBIFS: amend ubifs_recover_leb interface UBIFS: introduce a "grouped" journal head flag UBIFS: supress false error messages 03 June 2011, 22:59:32 UTC
9a44fde Linus Torvalds 03 June 2011, 22:58:48 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest: ktest: Ignore unset values of the minconfig in config_bisect ktest: Fix result of rebooting the kernel ktest: Fix off-by-one in config bisect result 03 June 2011, 22:58:48 UTC
cd4ecf8 Linus Torvalds 03 June 2011, 22:53:23 UTC Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: mach-shmobile: add DMAC clock definitions on SH7372 ARM: arch-shmobile: support SDHI card detection on mackerel, using a GPIO sh_mobile_meram: MERAM platform data for LCDC 03 June 2011, 22:53:23 UTC
1f3bd0f Linus Torvalds 03 June 2011, 22:04:25 UTC Merge branch 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: dmaengine: shdma: fix a regression: initialise DMA channels for memcpy dmaengine: shdma: Fix up fallout from runtime PM changes. Revert "clocksource: sh_cmt: Runtime PM support" Revert "clocksource: sh_tmu: Runtime PM support" sh: Fix up asm-generic/ptrace.h fallout. sh64: Move from P1SEG to CAC_ADDR for consistent sync. sh64: asm/pgtable.h needs asm/mmu.h sh: asm/tlb.h needs linux/swap.h sh: mark DMA slave ID 0 as invalid sh: Update shmin to reflect PIO dependency. sh: arch/sh/kernel/process_32.c needs linux/prefetch.h. sh: add MMCIF runtime PM support on ecovec sh: switch ap325rxa to dynamically manage the platform camera 03 June 2011, 22:04:25 UTC
bb3d6bf Linus Torvalds 03 June 2011, 22:00:50 UTC Revert "ASoC: Update cx20442 for TTY API change" This reverts commit ed0bd2333cffc3d856db9beb829543c1dfc00982. Since we reverted the TTY API change, we should revert the ASoC update to it too. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 June 2011, 22:00:50 UTC
55db4c6 Linus Torvalds 03 June 2011, 21:33:24 UTC Revert "tty: make receive_buf() return the amout of bytes received" This reverts commit b1c43f82c5aa265442f82dba31ce985ebb7aa71c. It was broken in so many ways, and results in random odd pty issues. It re-introduced the buggy schedule_work() in flush_to_ldisc() that can cause endless work-loops (see commit a5660b41af6a: "tty: fix endless work loop when the buffer fills up"). It also used an "unsigned int" return value fo the ->receive_buf() function, but then made multiple functions return a negative error code, and didn't actually check for the error in the caller. And it didn't actually work at all. BenH bisected down odd tty behavior to it: "It looks like the patch is causing some major malfunctions of the X server for me, possibly related to PTYs. For example, cat'ing a large file in a gnome terminal hangs the kernel for -minutes- in a loop of what looks like flush_to_ldisc/workqueue code, (some ftrace data in the quoted bits further down). ... Some more data: It -looks- like what happens is that the flush_to_ldisc work queue entry constantly re-queues itself (because the PTY is full ?) and the workqueue thread will basically loop forver calling it without ever scheduling, thus starving the consumer process that could have emptied the PTY." which is pretty much exactly the problem we fixed in a5660b41af6a. Milton Miller pointed out the 'unsigned int' issue. Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: Milton Miller <miltonm@bga.com> Cc: Stefan Bigler <stefan.bigler@keymile.com> Cc: Toby Gray <toby.gray@realvnc.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 June 2011, 21:33:24 UTC
7b29dc2 John W. Linville 03 June 2011, 18:31:50 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem 03 June 2011, 18:31:50 UTC
157186b Eric Lammerts 27 May 2011, 22:16:52 UTC ALSA: usb - turn off de-emphasis in s/pdif for cm6206 CM6206: Turn off de-emphasis channel status bit in S/PDIF output. Signed-off-by: Eric Lammerts <eric@lammerts.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 03 June 2011, 16:22:56 UTC
0980119 Ben Gardiner 30 May 2011, 18:56:16 UTC UBIFS: fix-up free space earlier The free space fixup is currently initiated during mount after the call to ubifs_write_master() which results in a write to PEBs; this has been observed with the patch 'assert no fixup when writing a node' applied: Move the free space fixup on mount to before the calls to ubifs_recover_inl_heads() and ubifs_write_master(). This results in no assertions with the previously mentioned patch applied. Artem: tweaked the patch a bit Signed-off-by: Ben Gardiner <bengardiner@nanometrics> Reviewed-by: Matthew L. Creech <mlcreech@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> 03 June 2011, 15:12:31 UTC
781c571 Ben Gardiner 30 May 2011, 18:56:15 UTC UBIFS: intialize LPT earlier The current 'mount_ubifs()' implementation does not initialize the LPT until the the master node is marked dirty. Move the LPT initialization to before marking the master node dirty. This is a preparation for the next patch which will move the free-space-fixup check to before marking the master node dirty, because we have to fix-up the free space before doing any writes. Artem: massaged the patch and commit message. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Matthew L. Creech <mlcreech@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> 03 June 2011, 15:12:31 UTC
4f1ab9b Ben Gardiner 30 May 2011, 18:56:14 UTC UBIFS: assert no fixup when writing a node The current free space fixup can result in some writing to the UBI volume when the space_fixup flag is set. To catch instances where UBIFS is writing to the NAND while the space_fixup flag is set, add an assert to ubifs_write_node(). Artem: tweaked the patch, added similar assertion to the write buffer write path. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Matthew L. Creech <mlcreech@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> 03 June 2011, 15:12:31 UTC
8370723 Artem Bityutskiy 31 May 2011, 11:26:07 UTC UBIFS: fix clean znode counter corruption in error cases UBIFS maintains per-filesystem and global clean znode counters ('c->clean_zn_cnt' and 'ubifs_clean_zn_cnt'). It is important to maintain correct values there since the shrinker relies on 'ubifs_clean_zn_cnt'. However, in case of failures during commit the counters were corrupted. E.g., if a failure happens in the middle of 'write_index()', then some nodes in the commit list ('c->cnext') are marked as clean, and some are marked as dirty. And the 'ubifs_destroy_tnc_subtree()' frees does not retrun correct count, and we end up with non-zero 'c->clean_zn_cnt' when unmounting. This means that if we have 2 file-sytem and one of them fails, and we unmount it, 'ubifs_clean_zn_cnt' stays incorrect and confuses the shrinker. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> 03 June 2011, 15:12:31 UTC
812eb25 Artem Bityutskiy 31 May 2011, 05:40:40 UTC UBIFS: fix memory leak on error path UBIFS leaks memory on error path in 'ubifs_jnl_update()' in case of write failure because it forgets to free the 'struct ubifs_dent_node *dent' object. Although the object is small, the alignment can make it large - e.g., 2KiB if the min. I/O unit is 2KiB. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org 03 June 2011, 15:12:31 UTC
cf610bf Artem Bityutskiy 31 May 2011, 04:03:21 UTC UBIFS: fix shrinker object count reports Sometimes VM asks the shrinker to return amount of objects it can shrink, and we return the ubifs_clean_zn_cnt in that case. However, it is possible that this counter is negative for a short period of time, due to the way UBIFS TNC code updates it. And I can observe the following warnings sometimes: shrink_slab: ubifs_shrinker+0x0/0x2b7 [ubifs] negative objects to delete nr=-8541616642706119788 This patch makes sure UBIFS never returns negative count of objects. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org 03 June 2011, 15:12:24 UTC
5ff6197 Steven Miao 01 June 2011, 07:52:41 UTC Blackfin: strncpy: fix handling of zero lengths The jump to 4f will cause the NUL padding loop to run at least one time, so if string length is zero just jump to the end. Otherwise we wrongly write one NUL byte when size==0. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> 03 June 2011, 15:05:36 UTC
d50a2fb Joe Perches 03 June 2011, 09:28:49 UTC ALSA: asihpi: Use angle brackets for system includes Use the normal include style. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 03 June 2011, 09:46:37 UTC
840d8e5 Joachim Eastwood 01 June 2011, 21:59:10 UTC ASoC: atmel_ssc: Don't try to free ssc if request failed We should only call ssc_free() when ssc_request() succeeds or bad things will happen. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 03 June 2011, 09:04:17 UTC
9676001 Dan Carpenter 26 May 2011, 08:47:35 UTC ALSA: fm801: add error handling if auto-detect fails In the original code if auto detect failed and tea575x_tuner == 4 then we copy bogus information to chip->tea.card. I've changed the autodetect code to cleanup and return -ENODEV on error instead. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 03 June 2011, 08:11:17 UTC
a01ef05 Raymond Yau 01 June 2011, 07:09:48 UTC ALSA: hda - Check pin support EAPD in ad198x_power_eapd_write Check whether the pin supports EAPD in ad198x_power_eapd_write. Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 03 June 2011, 08:08:46 UTC
4dffbe0 Takashi Iwai 03 June 2011, 08:05:02 UTC ALSA: hda - Fix HP and Front pins of ad1988/ad1989 in ad198x_power_eapd() In ad198x_power_eapd(), wrong pin NIDs are used for controlling EAPD for HP and Front outputs of AD1988/AD1989. These are actually same with the ones for AD1984 & co, port-A is 0x11 and port-D 0x12. Reported-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 03 June 2011, 08:05:02 UTC
9a2e0fb Matt Carlson 02 June 2011, 13:01:39 UTC tg3: Fix tg3_skb_error_unmap() This function attempts to free one fragment beyond the number of fragments that were actually mapped. This patch brings back the limit to the correct spot. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 June 2011, 07:01:30 UTC
ec764bf Koki Sanagi 30 May 2011, 21:48:34 UTC net: tracepoint of net_dev_xmit sees freed skb and causes panic Because there is a possibility that skb is kfree_skb()ed and zero cleared after ndo_start_xmit, we should not see the contents of skb like skb->len and skb->dev->name after ndo_start_xmit. But trace_net_dev_xmit does that and causes panic by NULL pointer dereference. This patch fixes trace_net_dev_xmit not to see the contents of skb directly. If you want to reproduce this panic, 1. Get tracepoint of net_dev_xmit on 2. Create 2 guests on KVM 2. Make 2 guests use virtio_net 4. Execute netperf from one to another for a long time as a network burden 5. host will panic(It takes about 30 minutes) Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 June 2011, 21:06:31 UTC
b36a968 Chris Metcalf 02 June 2011, 18:21:45 UTC asm-generic/unistd.h: support sendmmsg syscall Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> 02 June 2011, 18:31:38 UTC
bf0be0e Jesper Juhl 30 May 2011, 10:49:01 UTC ALSA: 6fire: Don't leak firmware in error path One of the error paths in sound/usb/6fire/firmware.c::usb6fire_fw_ezusb_upload() neglects to free the memory allocated for the firmware before returning, thus leaking the memory. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> 02 June 2011, 17:56:31 UTC
9bf7174 Steven Rostedt 02 June 2011, 03:27:19 UTC ktest: Ignore unset values of the minconfig in config_bisect By ignoring the unset values of the minconfig in deciding what to test in the config_bisect can cause the problem config from being tested too. Just do not test the configs that are set in the minconfig. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 02 June 2011, 15:57:57 UTC
4da46da Steven Rostedt 02 June 2011, 03:25:13 UTC ktest: Fix result of rebooting the kernel The command that is called that reboots the kernel may fail but the return code is not passed back to the ktest.pl script. This is because a ';' is used between the two commands and if the second command fails, only the first command's return code is returned. Using a '&&' between the two commands fixes this. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 02 June 2011, 15:57:56 UTC
4c8cc55 Steven Rostedt 02 June 2011, 03:22:30 UTC ktest: Fix off-by-one in config bisect result Because in perl the array size returned by $#arr, is the last index and not the actually size of the array, we end the config bisect early, thinking there is only one config left when there are in fact two. Thus the result has a 50% chance of picking the correct config that caused the problem. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 02 June 2011, 15:57:41 UTC
e3a57b3 Jens Axboe 02 June 2011, 11:14:15 UTC Merge branch 'for-jens/xen-blkback.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus 02 June 2011, 11:14:15 UTC
e2bd967 Paul Bolle 02 June 2011, 11:05:02 UTC block: Use hlist_entry() for io_context.cic_list.first list_entry() and hlist_entry() are both simply aliases for container_of(), but since io_context.cic_list.first is an hlist_node one should at least use the correct alias. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> 02 June 2011, 11:05:02 UTC
28304f4 Paul Bolle 02 June 2011, 11:05:02 UTC cfq-iosched: Remove bogus check in queue_fail path queue_fail can only be reached if cic is NULL, so its check for cic must be bogus. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jens Axboe <jaxboe@fusionio.com> 02 June 2011, 11:05:02 UTC
e73e079 James Bottomley 25 May 2011, 20:52:14 UTC [SCSI] Fix oops caused by queue refcounting failure In certain circumstances, we can get an oops from a torn down device. Most notably this is from CD roms trying to call scsi_ioctl. The root cause of the problem is the fact that after scsi_remove_device() has been called, the queue is fully torn down. This is actually wrong since the queue can be used until the sdev release function is called. Therefore, we add an extra reference to the queue which is released in sdev->release, so the queue always exists. Reported-by: Parag Warudkar <parag.lkml@gmail.com> Cc: stable@kernel.org Signed-off-by: James Bottomley <jbottomley@parallels.com> 02 June 2011, 09:34:43 UTC
2e4ceec Julia Lawall 01 June 2011, 19:48:50 UTC drivers/net/can/flexcan.c: add missing clk_put The failed_get label is used after the call to clk_get has succeeded, so it should be moved up above the call to clk_put. The failed_req labels doesn't do anything different than failed_get, so delete it. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net> 02 June 2011, 07:10:01 UTC
816af74 Guennadi Liakhovetski 01 June 2011, 07:32:07 UTC ARM: mach-shmobile: add DMAC clock definitions on SH7372 These definitions are needed to let the runtime PM subsystem turn off DMAC clocks, when it is suspended by the driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 02 June 2011, 05:45:33 UTC
a1b2cc5 Guennadi Liakhovetski 31 May 2011, 09:25:16 UTC dmaengine: shdma: fix a regression: initialise DMA channels for memcpy A recent patch has introduced a regression, where repeating a memcpy DMA test with shdma module unloading between them skips the DMA channel configuration. Fix this regression by always configuring the channel during its allocation. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 02 June 2011, 05:40:43 UTC
6979d5d Mark Brown 01 June 2011, 10:18:09 UTC net: dm9000: Get the chip in a known good state before enabling interrupts Currently the DM9000 driver requests the primary interrupt before it resets the chip and puts it into a known good state. This means that if the chip is asserting interrupt for some reason we can end up with a screaming IRQ that the interrupt handler is unable to deal with. Avoid this by only requesting the interrupt after we've reset the chip so we know what state it's in. This started manifesting itself on one of my boards in the past month or so, I suspect as a result of some core infrastructure changes removing some form of mitigation against bad behaviour here, even when things boot it seems that the new code brings the interface up more quickly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 June 2011, 04:22:15 UTC
b722dbf Julia Lawall 01 June 2011, 07:10:10 UTC drivers/net/davinci_emac.c: add missing clk_put Go to existing error handling code at the end of the function that calls clk_put. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 June 2011, 04:20:14 UTC
a3bcc23 Ben Greear 01 June 2011, 06:49:10 UTC af-packet: Add flag to distinguish VID 0 from no-vlan. Currently, user-space cannot determine if a 0 tcp_vlan_tci means there is no VLAN tag or the VLAN ID was zero. Add flag to make this explicit. User-space can check for TP_STATUS_VLAN_VALID || tp_vlan_tci > 0, which will be backwards compatible. Older could would have just checked for tp_vlan_tci, so it will work no worse than before. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 June 2011, 04:18:03 UTC
41be5a4 sjur.brandeland@stericsson.com 01 June 2011, 00:55:37 UTC caif: Fix race when conditionally taking rtnl lock Take the RTNL lock unconditionally when calling dev_close. Taking the lock conditionally may cause race conditions. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 June 2011, 04:13:53 UTC
85e3c65 Stefan Metzmacher 01 June 2011, 02:01:41 UTC usbnet/cdc_ncm: add missing .reset_resume hook This avoids messages like this after suspend: cdc_ncm 2-1.4:1.6: no reset_resume for driver cdc_ncm? cdc_ncm 2-1.4:1.7: no reset_resume for driver cdc_ncm? cdc_ncm 2-1.4:1.6: usb0: unregister 'cdc_ncm' usb-0000:00:1d.0-1.4, CDC NCM This is important for the Ericsson F5521gw GSM/UMTS modem. Otherwise modemmanager looses the fact that the cdc_ncm and cdc_acm devices belong together. The cdc_ether module does the same. Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net> 02 June 2011, 04:10:49 UTC
307f73d Wei Yongjun 31 May 2011, 22:53:19 UTC vlan: fix typo in vlan_dev_hard_start_xmit() commit 4af429d29b341bb1735f04c2fb960178ed5d52e7 (vlan: lockless transmit path) have a typo in vlan_dev_hard_start_xmit(), using u64_stats_update_begin() to end the stat update, it should be u64_stats_update_end(). Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 June 2011, 04:08:47 UTC
d0733d2 Marcus Meissner 02 June 2011, 04:05:22 UTC net/ipv4: Check for mistakenly passed in non-IPv4 address Check against mistakenly passing in IPv6 addresses (which would result in an INADDR_ANY bind) or similar incompatible sockaddrs. Signed-off-by: Marcus Meissner <meissner@suse.de> Cc: Reinhard Max <max@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> 02 June 2011, 04:05:22 UTC
bb9973e Guenter Roeck 01 June 2011, 18:03:41 UTC hwmon: (coretemp) Further relax temperature range checks Further relax temperature range checks after reading the IA32_TEMPERATURE_TARGET register. If the register returns a value other than 0 in bits 16..32, assume that the returned value is correct. This change applies to both packet and core temperature limits. Cc: Carsten Emde <C.Emde@osadl.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Fenghua Yu <fenghua.yu@intel.com> 02 June 2011, 03:10:40 UTC
4f5f71a Guenter Roeck 31 May 2011, 13:54:21 UTC hwmon: (coretemp) Fix TjMax detection for older CPUs Commit a321cedb12904114e2ba5041a3673ca24deb09c9 excludes CPU models 0xe, 0xf, 0x16, and 0x1a from TjMax temperature adjustment, even though several of those CPUs are known to have TiMax other than 100 degrees C, and even though the code in adjust_tjmax() explicitly handles those CPUs and points to a Web document listing several of the affected CPU IDs. Reinstate original TjMax adjustment if TjMax can not be determined using the IA32_TEMPERATURE_TARGET register. https://bugzilla.kernel.org/show_bug.cgi?id=32582 Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Huaxu Wan <huaxu.wan@linux.intel.com> Cc: Carsten Emde <C.Emde@osadl.org> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Yong Wang <yong.y.wang@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Fenghua Yu <fenghua.yu@intel.com> Tested-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Fenghua Yu <fenghua.yu@intel.com> Cc: <stable@kernel.org> # .35.x .36.x .37.x .38.x .39.x 02 June 2011, 03:10:31 UTC
1fa7b6a Linus Torvalds 01 June 2011, 21:11:24 UTC Revert "mm: fail GFP_DMA allocations when ZONE_DMA is not configured" This reverts commit a197b59ae6e8bee56fcef37ea2482dc08414e2ac. As rmk says: "Commit a197b59ae6e8 (mm: fail GFP_DMA allocations when ZONE_DMA is not configured) is causing regressions on ARM with various drivers which use GFP_DMA. The behaviour up until now has been to silently ignore that flag when CONFIG_ZONE_DMA is not enabled, and to allocate from the normal zone. However, as a result of the above commit, such allocations now fail which causes drivers to fail. These are regressions compared to the previous kernel version." so just revert it. Requested-by: Russell King <linux@arm.linux.org.uk> Acked-by: Andrew Morton <akpm@linux-foundation.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 June 2011, 21:11:24 UTC
f0f52a9 Linus Torvalds 01 June 2011, 20:48:50 UTC Merge git://git.infradead.org/iommu-2.6 * git://git.infradead.org/iommu-2.6: intel-iommu: Fix off-by-one in RMRR setup intel-iommu: Add domain check in domain_remove_one_dev_info intel-iommu: Remove Host Bridge devices from identity mapping intel-iommu: Use coherent DMA mask when requested intel-iommu: Dont cache iova above 32bit intel-iommu: Speed up processing of the identity_mapping function intel-iommu: Check for identity mapping candidate using system dma mask intel-iommu: Only unlink device domains from iommu intel-iommu: Enable super page (2MiB, 1GiB, etc.) support intel-iommu: Flush unmaps at domain_exit intel-iommu: Remove obsolete comment from detect_intel_iommu intel-iommu: fix VT-d PMR disable for TXT on S3 resume 01 June 2011, 20:48:50 UTC
0f48f26 Linus Torvalds 01 June 2011, 20:29:19 UTC block: fix mismerge of the DISK_EVENT_MEDIA_CHANGE removal Jens' back-merge commit 698567f3fa79 ("Merge commit 'v2.6.39' into for-2.6.40/core") was incorrectly done, and re-introduced the DISK_EVENT_MEDIA_CHANGE lines that had been removed earlier in commits - 9fd097b14918 ("block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers") - 7eec77a1816a ("ide: unexport DISK_EVENT_MEDIA_CHANGE for ide-gd and ide-cd") because of conflicts with the "g->flags" updates near-by by commit d4dc210f69bc ("block: don't block events on excl write for non-optical devices") As a result, we re-introduced the hanging behavior due to infinite disk media change reports. Tssk, tssk, people! Don't do back-merges at all, and *definitely* don't do them to hide merge conflicts from me - especially as I'm likely better at merging them than you are, since I do so many merges. Reported-by: Steven Rostedt <rostedt@goodmis.org> Cc: Jens Axboe <jaxboe@fusionio.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 June 2011, 20:29:19 UTC
back to top