Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
b13bc35 Qian Cai 01 February 2019, 22:20:51 UTC mm/hotplug: invalid PFNs from pfn_to_online_page() On an arm64 ThunderX2 server, the first kmemleak scan would crash [1] with CONFIG_DEBUG_VM_PGFLAGS=y due to page_to_nid() found a pfn that is not directly mapped (MEMBLOCK_NOMAP). Hence, the page->flags is uninitialized. This is due to the commit 9f1eb38e0e11 ("mm, kmemleak: little optimization while scanning") starts to use pfn_to_online_page() instead of pfn_valid(). However, in the CONFIG_MEMORY_HOTPLUG=y case, pfn_to_online_page() does not call memblock_is_map_memory() while pfn_valid() does. Historically, the commit 68709f45385a ("arm64: only consider memblocks with NOMAP cleared for linear mapping") causes pages marked as nomap being no long reassigned to the new zone in memmap_init_zone() by calling __init_single_page(). Since the commit 2d070eab2e82 ("mm: consider zone which is not fully populated to have holes") introduced pfn_to_online_page() and was designed to return a valid pfn only, but it is clearly broken on arm64. Therefore, let pfn_to_online_page() call pfn_valid_within(), so it can handle nomap thanks to the commit f52bb98f5ade ("arm64: mm: always enable CONFIG_HOLES_IN_ZONE"), while it will be optimized away on architectures where have no HOLES_IN_ZONE. [1] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000006 Mem abort info: ESR = 0x96000005 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 Internal error: Oops: 96000005 [#1] SMP CPU: 60 PID: 1408 Comm: kmemleak Not tainted 5.0.0-rc2+ #8 pstate: 60400009 (nZCv daif +PAN -UAO) pc : page_mapping+0x24/0x144 lr : __dump_page+0x34/0x3dc sp : ffff00003a5cfd10 x29: ffff00003a5cfd10 x28: 000000000000802f x27: 0000000000000000 x26: 0000000000277d00 x25: ffff000010791f56 x24: ffff7fe000000000 x23: ffff000010772f8b x22: ffff00001125f670 x21: ffff000011311000 x20: ffff000010772f8b x19: fffffffffffffffe x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: ffff802698b19600 x13: ffff802698b1a200 x12: ffff802698b16f00 x11: ffff802698b1a400 x10: 0000000000001400 x9 : 0000000000000001 x8 : ffff00001121a000 x7 : 0000000000000000 x6 : ffff0000102c53b8 x5 : 0000000000000000 x4 : 0000000000000003 x3 : 0000000000000100 x2 : 0000000000000000 x1 : ffff000010772f8b x0 : ffffffffffffffff Process kmemleak (pid: 1408, stack limit = 0x(____ptrval____)) Call trace: page_mapping+0x24/0x144 __dump_page+0x34/0x3dc dump_page+0x28/0x4c kmemleak_scan+0x4ac/0x680 kmemleak_scan_thread+0xb4/0xdc kthread+0x12c/0x13c ret_from_fork+0x10/0x18 Code: d503201f f9400660 36000040 d1000413 (f9400661) ---[ end trace 4d4bd7f573490c8e ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x002,20000c38 Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception ]--- Link: http://lkml.kernel.org/r/20190122132916.28360-1-cai@lca.pw Fixes: 9f1eb38e0e11 ("mm, kmemleak: little optimization while scanning") Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 February 2019, 23:46:23 UTC
eeb0efd Oscar Salvador 01 February 2019, 22:20:47 UTC mm,memory_hotplug: fix scan_movable_pages() for gigantic hugepages This is the same sort of error we saw in commit 17e2e7d7e1b8 ("mm, page_alloc: fix has_unmovable_pages for HugePages"). Gigantic hugepages cross several memblocks, so it can be that the page we get in scan_movable_pages() is a page-tail belonging to a 1G-hugepage. If that happens, page_hstate()->size_to_hstate() will return NULL, and we will blow up in hugepage_migration_supported(). The splat is as follows: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 1350 Comm: bash Tainted: G E 5.0.0-rc1-mm1-1-default+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__offline_pages+0x6ae/0x900 Call Trace: memory_subsys_offline+0x42/0x60 device_offline+0x80/0xa0 state_store+0xab/0xc0 kernfs_fop_write+0x102/0x180 __vfs_write+0x26/0x190 vfs_write+0xad/0x1b0 ksys_write+0x42/0x90 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Modules linked in: af_packet(E) xt_tcpudp(E) ipt_REJECT(E) xt_conntrack(E) nf_conntrack(E) nf_defrag_ipv4(E) ip_set(E) nfnetlink(E) ebtable_nat(E) ebtable_broute(E) bridge(E) stp(E) llc(E) iptable_mangle(E) iptable_raw(E) iptable_security(E) ebtable_filter(E) ebtables(E) iptable_filter(E) ip_tables(E) x_tables(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) ghash_clmulni_intel(E) bochs_drm(E) ttm(E) aesni_intel(E) drm_kms_helper(E) aes_x86_64(E) crypto_simd(E) cryptd(E) glue_helper(E) drm(E) virtio_net(E) syscopyarea(E) sysfillrect(E) net_failover(E) sysimgblt(E) pcspkr(E) failover(E) i2c_piix4(E) fb_sys_fops(E) parport_pc(E) parport(E) button(E) btrfs(E) libcrc32c(E) xor(E) zstd_decompress(E) zstd_compress(E) xxhash(E) raid6_pq(E) sd_mod(E) ata_generic(E) ata_piix(E) ahci(E) libahci(E) libata(E) crc32c_intel(E) serio_raw(E) virtio_pci(E) virtio_ring(E) virtio(E) sg(E) scsi_mod(E) autofs4(E) [akpm@linux-foundation.org: fix brace layout, per David. Reduce indentation] Link: http://lkml.kernel.org/r/20190122154407.18417-1-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 February 2019, 23:46:23 UTC
1b69ac6 Johannes Weiner 01 February 2019, 22:20:42 UTC psi: fix aggregation idle shut-off psi has provisions to shut off the periodic aggregation worker when there is a period of no task activity - and thus no data that needs aggregating. However, while developing psi monitoring, Suren noticed that the aggregation clock currently won't stay shut off for good. Debugging this revealed a flaw in the idle design: an aggregation run will see no task activity and decide to go to sleep; shortly thereafter, the kworker thread that executed the aggregation will go idle and cause a scheduling change, during which the psi callback will kick the !pending worker again. This will ping-pong forever, and is equivalent to having no shut-off logic at all (but with more code!) Fix this by exempting aggregation workers from psi's clock waking logic when the state change is them going to sleep. To do this, tag workers with the last work function they executed, and if in psi we see a worker going to sleep after aggregating psi data, we will not reschedule the aggregation work item. What if the worker is also executing other items before or after? Any psi state times that were incurred by work items preceding the aggregation work will have been collected from the per-cpu buckets during the aggregation itself. If there are work items following the aggregation work, the worker's last_func tag will be overwritten and the aggregator will be kept alive to process this genuine new activity. If the aggregation work is the last thing the worker does, and we decide to go idle, the brief period of non-idle time incurred between the aggregation run and the kworker's dequeue will be stranded in the per-cpu buckets until the clock is woken by later activity. But that should not be a problem. The buckets can hold 4s worth of time, and future activity will wake the clock with a 2s delay, giving us 2s worth of data we can leave behind when disabling aggregation. If it takes a worker more than two seconds to go idle after it finishes its last work item, we likely have bigger problems in the system, and won't notice one sample that was averaged with a bogus per-CPU weight. Link: http://lkml.kernel.org/r/20190116193501.1910-1-hannes@cmpxchg.org Fixes: eb414681d5a0 ("psi: pressure stall information for CPU, memory, and IO") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 February 2019, 23:46:23 UTC
24feb47 Mikhail Zaslonko 01 February 2019, 22:20:38 UTC mm, memory_hotplug: test_pages_in_a_zone do not pass the end of zone If memory end is not aligned with the sparse memory section boundary, the mapping of such a section is only partly initialized. This may lead to VM_BUG_ON due to uninitialized struct pages access from test_pages_in_a_zone() function triggered by memory_hotplug sysfs handlers. Here are the the panic examples: CONFIG_DEBUG_VM_PGFLAGS=y kernel parameter mem=2050M -------------------------- page:000003d082008000 is uninitialized and poisoned page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) Call Trace: test_pages_in_a_zone+0xde/0x160 show_valid_zones+0x5c/0x190 dev_attr_show+0x34/0x70 sysfs_kf_seq_show+0xc8/0x148 seq_read+0x204/0x480 __vfs_read+0x32/0x178 vfs_read+0x82/0x138 ksys_read+0x5a/0xb0 system_call+0xdc/0x2d8 Last Breaking-Event-Address: test_pages_in_a_zone+0xde/0x160 Kernel panic - not syncing: Fatal exception: panic_on_oops Fix this by checking whether the pfn to check is within the zone. [mhocko@suse.com: separated this change from http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com] Link: http://lkml.kernel.org/r/20190128144506.15603-3-mhocko@kernel.org [mhocko@suse.com: separated this change from http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com] Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 February 2019, 23:46:23 UTC
efad4e4 Michal Hocko 01 February 2019, 22:20:34 UTC mm, memory_hotplug: is_mem_section_removable do not pass the end of a zone Patch series "mm, memory_hotplug: fix uninitialized pages fallouts", v2. Mikhail Zaslonko has posted fixes for the two bugs quite some time ago [1]. I have pushed back on those fixes because I believed that it is much better to plug the problem at the initialization time rather than play whack-a-mole all over the hotplug code and find all the places which expect the full memory section to be initialized. We have ended up with commit 2830bf6f05fb ("mm, memory_hotplug: initialize struct pages for the full memory section") merged and cause a regression [2][3]. The reason is that there might be memory layouts when two NUMA nodes share the same memory section so the merged fix is simply incorrect. In order to plug this hole we really have to be zone range aware in those handlers. I have split up the original patch into two. One is unchanged (patch 2) and I took a different approach for `removable' crash. [1] http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com [2] https://bugzilla.redhat.com/show_bug.cgi?id=1666948 [3] http://lkml.kernel.org/r/20190125163938.GA20411@dhcp22.suse.cz This patch (of 2): Mikhail has reported the following VM_BUG_ON triggered when reading sysfs removable state of a memory block: page:000003d08300c000 is uninitialized and poisoned page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) Call Trace: is_mem_section_removable+0xb4/0x190 show_mem_removable+0x9a/0xd8 dev_attr_show+0x34/0x70 sysfs_kf_seq_show+0xc8/0x148 seq_read+0x204/0x480 __vfs_read+0x32/0x178 vfs_read+0x82/0x138 ksys_read+0x5a/0xb0 system_call+0xdc/0x2d8 Last Breaking-Event-Address: is_mem_section_removable+0xb4/0x190 Kernel panic - not syncing: Fatal exception: panic_on_oops The reason is that the memory block spans the zone boundary and we are stumbling over an unitialized struct page. Fix this by enforcing zone range in is_mem_section_removable so that we never run away from a zone. Link: http://lkml.kernel.org/r/20190128144506.15603-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Debugged-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 February 2019, 23:46:23 UTC
9bcdeb5 Tetsuo Handa 01 February 2019, 22:20:31 UTC oom, oom_reaper: do not enqueue same task twice Arkadiusz reported that enabling memcg's group oom killing causes strange memcg statistics where there is no task in a memcg despite the number of tasks in that memcg is not 0. It turned out that there is a bug in wake_oom_reaper() which allows enqueuing same task twice which makes impossible to decrease the number of tasks in that memcg due to a refcount leak. This bug existed since the OOM reaper became invokable from task_will_free_mem(current) path in out_of_memory() in Linux 4.7, T1@P1 |T2@P1 |T3@P1 |OOM reaper ----------+----------+----------+------------ # Processing an OOM victim in a different memcg domain. try_charge() mem_cgroup_out_of_memory() mutex_lock(&oom_lock) try_charge() mem_cgroup_out_of_memory() mutex_lock(&oom_lock) try_charge() mem_cgroup_out_of_memory() mutex_lock(&oom_lock) out_of_memory() oom_kill_process(P1) do_send_sig_info(SIGKILL, @P1) mark_oom_victim(T1@P1) wake_oom_reaper(T1@P1) # T1@P1 is enqueued. mutex_unlock(&oom_lock) out_of_memory() mark_oom_victim(T2@P1) wake_oom_reaper(T2@P1) # T2@P1 is enqueued. mutex_unlock(&oom_lock) out_of_memory() mark_oom_victim(T1@P1) wake_oom_reaper(T1@P1) # T1@P1 is enqueued again due to oom_reaper_list == T2@P1 && T1@P1->oom_reaper_list == NULL. mutex_unlock(&oom_lock) # Completed processing an OOM victim in a different memcg domain. spin_lock(&oom_reaper_lock) # T1P1 is dequeued. spin_unlock(&oom_reaper_lock) but memcg's group oom killing made it easier to trigger this bug by calling wake_oom_reaper() on the same task from one out_of_memory() request. Fix this bug using an approach used by commit 855b018325737f76 ("oom, oom_reaper: disable oom_reaper for oom_kill_allocating_task"). As a side effect of this patch, this patch also avoids enqueuing multiple threads sharing memory via task_will_free_mem(current) path. Link: http://lkml.kernel.org/r/e865a044-2c10-9858-f4ef-254bc71d6cc2@i-love.sakura.ne.jp Link: http://lkml.kernel.org/r/5ee34fc6-1485-34f8-8790-903ddabaa809@i-love.sakura.ne.jp Fixes: af8e15cc85a25315 ("oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl> Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Aleksa Sarai <asarai@suse.de> Cc: Jay Kamat <jgkamat@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 February 2019, 23:46:23 UTC
80409c6 Jan Kara 01 February 2019, 22:20:27 UTC mm: migrate: make buffer_migrate_page_norefs() actually succeed Currently, buffer_migrate_page_norefs() was constantly failing because buffer_migrate_lock_buffers() grabbed reference on each buffer. In fact, there's no reason for buffer_migrate_lock_buffers() to grab any buffer references as the page is locked during all our operation and thus nobody can reclaim buffers from the page. So remove grabbing of buffer references which also makes buffer_migrate_page_norefs() succeed. Link: http://lkml.kernel.org/r/20190116131217.7226-1-jack@suse.cz Fixes: 89cb0888ca14 "mm: migrate: provide buffer_migrate_page_norefs()" Signed-off-by: Jan Kara <jack@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 February 2019, 23:46:23 UTC
8fb335e Andrei Vagin 01 February 2019, 22:20:24 UTC kernel/exit.c: release ptraced tasks before zap_pid_ns_processes Currently, exit_ptrace() adds all ptraced tasks in a dead list, then zap_pid_ns_processes() waits on all tasks in a current pidns, and only then are tasks from the dead list released. zap_pid_ns_processes() can get stuck on waiting tasks from the dead list. In this case, we will have one unkillable process with one or more dead children. Thanks to Oleg for the advice to release tasks in find_child_reaper(). Link: http://lkml.kernel.org/r/20190110175200.12442-1-avagin@gmail.com Fixes: 7c8bd2322c7f ("exit: ptrace: shift "reap dead" code from exit_ptrace() to forget_original_parent()") Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 February 2019, 23:46:23 UTC
a8e911d Qian Cai 01 February 2019, 22:20:20 UTC x86_64: increase stack size for KASAN_EXTRA If the kernel is configured with KASAN_EXTRA, the stack size is increasted significantly because this option sets "-fstack-reuse" to "none" in GCC [1]. As a result, it triggers stack overrun quite often with 32k stack size compiled using GCC 8. For example, this reproducer https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/madvise/madvise06.c triggers a "corrupted stack end detected inside scheduler" very reliably with CONFIG_SCHED_STACK_END_CHECK enabled. There are just too many functions that could have a large stack with KASAN_EXTRA due to large local variables that have been called over and over again without being able to reuse the stacks. Some noticiable ones are size 7648 shrink_page_list 3584 xfs_rmap_convert 3312 migrate_page_move_mapping 3312 dev_ethtool 3200 migrate_misplaced_transhuge_page 3168 copy_process There are other 49 functions are over 2k in size while compiling kernel with "-Wframe-larger-than=" even with a related minimal config on this machine. Hence, it is too much work to change Makefiles for each object to compile without "-fsanitize-address-use-after-scope" individually. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715#c23 Although there is a patch in GCC 9 to help the situation, GCC 9 probably won't be released in a few months and then it probably take another 6-month to 1-year for all major distros to include it as a default. Hence, the stack usage with KASAN_EXTRA can be revisited again in 2020 when GCC 9 is everywhere. Until then, this patch will help users avoid stack overrun. This has already been fixed for arm64 for the same reason via 6e8830674ea ("arm64: kasan: Increase stack size for KASAN_EXTRA"). Link: http://lkml.kernel.org/r/20190109215209.2903-1-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 February 2019, 23:46:23 UTC
1ac2501 Andrea Arcangeli 01 February 2019, 22:20:16 UTC mm/hugetlb.c: teach follow_hugetlb_page() to handle FOLL_NOWAIT hugetlb needs the same fix as faultin_nopage (which was applied in commit 96312e61282a ("mm/gup.c: teach get_user_pages_unlocked to handle FOLL_NOWAIT")) or KVM hangs because it thinks the mmap_sem was already released by hugetlb_fault() if it returned VM_FAULT_RETRY, but it wasn't in the FOLL_NOWAIT case. Link: http://lkml.kernel.org/r/20190109020203.26669-2-aarcange@redhat.com Fixes: ce53053ce378 ("kvm: switch get_user_page_nowait() to get_user_pages_unlocked()") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Tested-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 February 2019, 23:46:23 UTC
36c0f7f Masahiro Yamada 01 February 2019, 22:20:12 UTC arch: unexport asm/shmparam.h for all architectures Most architectures do not export shmparam.h to user-space. $ find arch -name shmparam.h | sort arch/alpha/include/asm/shmparam.h arch/arc/include/asm/shmparam.h arch/arm64/include/asm/shmparam.h arch/arm/include/asm/shmparam.h arch/csky/include/asm/shmparam.h arch/ia64/include/asm/shmparam.h arch/mips/include/asm/shmparam.h arch/nds32/include/asm/shmparam.h arch/nios2/include/asm/shmparam.h arch/parisc/include/asm/shmparam.h arch/powerpc/include/asm/shmparam.h arch/s390/include/asm/shmparam.h arch/sh/include/asm/shmparam.h arch/sparc/include/asm/shmparam.h arch/x86/include/asm/shmparam.h arch/xtensa/include/asm/shmparam.h Strangely, some users of the asm-generic wrapper export shmparam.h $ git grep 'generic-y += shmparam.h' arch/c6x/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/h8300/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/hexagon/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/m68k/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/microblaze/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/openrisc/include/uapi/asm/Kbuild:generic-y += shmparam.h arch/riscv/include/asm/Kbuild:generic-y += shmparam.h arch/unicore32/include/uapi/asm/Kbuild:generic-y += shmparam.h The newly added riscv correctly creates the asm-generic wrapper in the kernel space, but the others (c6x, h8300, hexagon, m68k, microblaze, openrisc, unicore32) create the one in the uapi directory. Digging into the git history, now I guess fcc8487d477a ("uapi: export all headers under uapi directories") was the misconversion. Prior to that commit, no architecture exported to shmparam.h As its commit description said, that commit exported shmparam.h for c6x, h8300, hexagon, m68k, openrisc, unicore32. 83f0124ad81e ("microblaze: remove asm-generic wrapper headers") accidentally exported shmparam.h for microblaze. This commit unexports shmparam.h for those architectures. There is no more reason to export include/uapi/asm-generic/shmparam.h, so it has been moved to include/asm-generic/shmparam.h Link: http://lkml.kernel.org/r/1546904307-11124-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stafford Horne <shorne@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Mark Salter <msalter@redhat.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Jonas Bonn <jonas@southpole.se> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 February 2019, 23:46:22 UTC
1fde6f2 Alexey Dobriyan 01 February 2019, 22:20:01 UTC proc: fix /proc/net/* after setns(2) /proc entries under /proc/net/* can't be cached into dcache because setns(2) can change current net namespace. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: avoid vim miscolorization] [adobriyan@gmail.com: write test, add dummy ->d_revalidate hook: necessary if /proc/net/* is pinned at setns time] Link: http://lkml.kernel.org/r/20190108192350.GA12034@avx2 Link: http://lkml.kernel.org/r/20190107162336.GA9239@avx2 Fixes: 1da4d377f943fe4194ffb9fb9c26cc58fad4dd24 ("proc: revalidate misc dentries") Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reported-by: Mateusz Stępień <mateusz.stepien@netrounds.com> Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 February 2019, 23:46:22 UTC
1723058 Oscar Salvador 01 February 2019, 22:19:57 UTC mm, memory_hotplug: don't bail out in do_migrate_range() prematurely do_migrate_range() takes a memory range and tries to isolate the pages to put them into a list. This list will be later on used in migrate_pages() to know the pages we need to migrate. Currently, if we fail to isolate a single page, we put all already isolated pages back to their LRU and we bail out from the function. This is quite suboptimal, as this will force us to start over again because scan_movable_pages will give us the same range. If there is no chance that we can isolate that page, we will loop here forever. Issue debugged in [1] has proved that. During the debugging of that issue, it was noticed that if do_migrate_ranges() fails to isolate a single page, we will just discard the work we have done so far and bail out, which means that scan_movable_pages() will find again the same set of pages. Instead, we can just skip the error, keep isolating as much pages as possible and then proceed with the call to migrate_pages(). This will allow us to do as much work as possible at once. [1] https://lkml.org/lkml/2018/12/6/324 Michal said: : I still think that this doesn't give us a whole picture. Looping for : ever is a bug. Failing the isolation is quite possible and it should : be a ephemeral condition (e.g. a race with freeing the page or : somebody else isolating the page for whatever reason). And here comes : the disadvantage of the current implementation. We simply throw : everything on the floor just because of a ephemeral condition. The : racy page_count check is quite dubious to prevent from that. Link: http://lkml.kernel.org/r/20181211135312.27034-1-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 February 2019, 23:46:22 UTC
5eeb633 Linus Torvalds 01 February 2019, 18:39:24 UTC Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma Pull rdma fixes from Jason Gunthorpe: "Still not much going on, the usual set of oops and driver fixes this time: - Fix two uapi breakage regressions in mlx5 drivers - Various oops fixes in hfi1, mlx4, umem, uverbs, and ipoib - A protocol bug fix for hfi1 preventing it from implementing the verbs API properly, and a compatability fix for EXEC STACK user programs - Fix missed refcounting in the 'advise_mr' patches merged this cycle. - Fix wrong use of the uABI in the hns SRQ patches merged this cycle" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/uverbs: Fix OOPs in uverbs_user_mmap_disassociate IB/ipoib: Fix for use-after-free in ipoib_cm_tx_start IB/uverbs: Fix ioctl query port to consider device disassociation RDMA/mlx5: Fix flow creation on representors IB/uverbs: Fix OOPs upon device disassociation RDMA/umem: Add missing initialization of owning_mm RDMA/hns: Update the kernel header file of hns IB/mlx5: Fix how advise_mr() launches async work RDMA/device: Expose ib_device_try_get(() IB/hfi1: Add limit test for RC/UC send via loopback IB/hfi1: Remove overly conservative VM_EXEC flag check IB/{hfi1, qib}: Fix WC.byte_len calculation for UD_SEND_WITH_IMM IB/mlx4: Fix using wrong function to destroy sqp AHs under SRIOV RDMA/mlx5: Fix check for supported user flags when creating a QP 01 February 2019, 18:39:24 UTC
9ace868 Linus Torvalds 01 February 2019, 18:30:18 UTC Merge tag 'iomap-5.0-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull iomap fixes from Darrick Wong: "A couple of iomap fixes to eliminate some memory corruption and hang problems that were reported: - fix page migration when using iomap for pagecache management - fix a use-after-free bug in the directio code" * tag 'iomap-5.0-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: fix a use after free in iomap_dio_rw iomap: get/put the page in iomap_page_create/release() 01 February 2019, 18:30:18 UTC
3325254 Linus Torvalds 01 February 2019, 18:23:39 UTC Merge tag 'pm-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a PM-runtime framework regression introduced by the recent switch-over of device autosuspend to hrtimers and a mistake in the "poll idle state" code introduced by a recent change in it. Specifics: - Since ktime_get() turns out to be problematic for device autosuspend in the PM-runtime framework, make it use ktime_get_mono_fast_ns() instead (Vincent Guittot). - Fix an initial value of a local variable in the "poll idle state" code that makes it behave not exactly as expected when all idle states except for the "polling" one are disabled (Doug Smythies)" * tag 'pm-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: poll_state: Fix default time limit PM-runtime: Fix deadlock with ktime_get() 01 February 2019, 18:23:39 UTC
4771eec Linus Torvalds 01 February 2019, 18:21:29 UTC Merge tag 'acpi-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI Kconfig fixes from Rafael Wysocki: "Prevent invalid configurations from being created (e.g. by randconfig) due to some ACPI-related Kconfig options' dependencies that are not specified directly (Sinan Kaya)" * tag 'acpi-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: platform/x86: Fix unmet dependency warning for SAMSUNG_Q10 platform/x86: Fix unmet dependency warning for ACPI_CMPC mfd: Fix unmet dependency warning for MFD_TPS68470 01 February 2019, 18:21:29 UTC
cca2e06 Linus Torvalds 01 February 2019, 18:19:50 UTC Merge tag 'mmc-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fixes from Ulf Hansson: - mediatek: Fix incorrect register write for tunings - bcm2835: Fixup leakage of DMA channel on probe errors * tag 'mmc-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mediatek: fix incorrect register setting of hs400_cmd_int_delay mmc: bcm2835: Fix DMA channel leak on probe error 01 February 2019, 18:19:50 UTC
520fac0 Linus Torvalds 01 February 2019, 18:17:51 UTC Merge tag 'i3c/fixes-for-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c fixes from Boris Brezillon: - Fix a deadlock in the designware driver - Fix the error path in i3c_master_add_i3c_dev_locked() * tag 'i3c/fixes-for-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: master: dw: fix deadlock i3c: fix missing detach if failed to retrieve i3c dev 01 February 2019, 18:17:51 UTC
c228d29 Linus Torvalds 31 January 2019, 19:10:20 UTC x86: explicitly align IO accesses in memcpy_{to,from}io In commit 170d13ca3a2f ("x86: re-introduce non-generic memcpy_{to,from}io") I made our copy from IO space use a separate copy routine rather than rely on the generic memcpy. I did that because our generic memory copy isn't actually well-defined when it comes to internal access ordering or alignment, and will in fact depend on various CPUID flags. In particular, the default memcpy() for a modern Intel CPU will generally be just a "rep movsb", which works reasonably well for medium-sized memory copies of regular RAM, since the CPU will turn it into fairly optimized microcode. However, for non-cached memory and IO, "rep movs" ends up being horrendously slow and will just do the architectural "one byte at a time" accesses implied by the movsb. At the other end of the spectrum, if you _don't_ end up using the "rep movsb" code, you'd likely fall back to the software copy, which does overlapping accesses for the tail, and may copy things backwards. Again, for regular memory that's fine, for IO memory not so much. The thinking was that clearly nobody really cared (because things worked), but some people had seen horrible performance due to the byte accesses, so let's just revert back to our long ago version that dod "rep movsl" for the bulk of the copy, and then fixed up the potentially last few bytes of the tail with "movsw/b". Interestingly (and perhaps not entirely surprisingly), while that was our original memory copy implementation, and had been used before for IO, in the meantime many new users of memcpy_*io() had come about. And while the access patterns for the memory copy weren't well-defined (so arguably _any_ access pattern should work), in practice the "rep movsb" case had been very common for the last several years. In particular Jarkko Sakkinen reported that the memcpy_*io() change resuled in weird errors from his Geminilake NUC TPM module. And it turns out that the TPM TCG accesses according to spec require that the accesses be (a) done strictly sequentially (b) be naturally aligned otherwise the TPM chip will abort the PCI transaction. And, in fact, the tpm_crb.c driver did this: memcpy_fromio(buf, priv->rsp, 6); ... memcpy_fromio(&buf[6], &priv->rsp[6], expected - 6); which really should never have worked in the first place, but back before commit 170d13ca3a2f it *happened* to work, because the memcpy_fromio() would be expanded to a regular memcpy, and (a) gcc would expand the first memcpy in-line, and turn it into a 4-byte and a 2-byte read, and they happened to be in the right order, and the alignment was right. (b) gcc would call "memcpy()" for the second one, and the machines that had this TPM chip also apparently ended up always having ERMS ("Enhanced REP MOVSB/STOSB instructions"), so we'd use the "rep movbs" for that copy. In other words, basically by pure luck, the code happened to use the right access sizes in the (two different!) memcpy() implementations to make it all work. But after commit 170d13ca3a2f, both of the memcpy_fromio() calls resulted in a call to the routine with the consistent memory accesses, and in both cases it started out transferring with 4-byte accesses. Which worked for the first copy, but resulted in the second copy doing a 32-bit read at an address that was only 2-byte aligned. Jarkko is actually fixing the fragile code in the TPM driver, but since this is an excellent example of why we absolutely must not use a generic memcpy for IO accesses, _and_ an IO-specific one really should strive to align the IO accesses, let's do exactly that. Side note: Jarkko also noted that the driver had been used on ARM platforms, and had worked. That was because on 32-bit ARM, memcpy_*io() ends up always doing byte accesses, and on 64-bit ARM it first does byte accesses to align to 8-byte boundaries, and then does 8-byte accesses for the bulk. So ARM actually worked by design, and the x86 case worked by pure luck. We *might* want to make x86-64 do the 8-byte case too. That should be a pretty straightforward extension, but let's do one thing at a time. And generally MMIO accesses aren't really all that performance-critical, as shown by the fact that for a long time we just did them a byte at a time, and very few people ever noticed. Reported-and-tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jerry Snitselaar <jsnitsel@redhat.com> Cc: David Laight <David.Laight@aculab.com> Fixes: 170d13ca3a2f ("x86: re-introduce non-generic memcpy_{to,from}io") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 01 February 2019, 17:07:48 UTC
b473406 Rafael J. Wysocki 01 February 2019, 10:06:05 UTC Merge branch 'acpi-misc' * acpi-misc: platform/x86: Fix unmet dependency warning for SAMSUNG_Q10 platform/x86: Fix unmet dependency warning for ACPI_CMPC 01 February 2019, 10:06:05 UTC
cbffab6 Rafael J. Wysocki 01 February 2019, 10:05:27 UTC Merge branch 'pm-cpuidle-fixes' * pm-cpuidle-fixes: cpuidle: poll_state: Fix default time limit 01 February 2019, 10:05:27 UTC
5b4746a Linus Torvalds 01 February 2019, 07:22:57 UTC Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Mostly driver fixes, but there's a core framework fix in here too: - Revert the commits that introduce clk management for the SP clk on MMP2 SoCs (used for OLPC). Turns out it wasn't a good idea and there isn't any need to manage this clk, it just causes more headaches. - A performance regression that went unnoticed for many years where we would traverse the entire clk tree looking for a clk by name when we already have the pointer to said clk that we're looking for - A parent linkage fix for the qcom SDM845 clk driver - An i.MX clk driver rate miscalculation fix where order of operations were messed up - One error handling fix from the static checkers" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc: Use active only source for CPUSS clocks clk: ti: Fix error handling in ti_clk_parse_divider_data() clk: imx: Fix fractional clock set rate computation clk: Remove global clk traversal on fetch parent index Revert "dt-bindings: marvell,mmp2: Add clock id for the SP clock" Revert "clk: mmp2: add SP clock" Revert "Input: olpc_apsp - enable the SP clock" 01 February 2019, 07:22:57 UTC
52107c5 Linus Torvalds 01 February 2019, 07:09:00 UTC Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a bug in cavium/nitrox where the callback is invoked prior to the DMA unmap" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: cavium/nitrox - Invoke callback after DMA unmap 01 February 2019, 07:09:00 UTC
44e56f3 Linus Torvalds 01 February 2019, 07:06:17 UTC Merge tag 'pci-v5.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Revert armada8k GPIO reset change that broke Macchiatobin booting (Baruch Siach) - Use actual size config reads on ARM cns3xxx (Koen Vandeputte) - Fix ARM cns3xxx config write alignment issue (Koen Vandeputte) - Fix imx6 PHY device link error checking (Leonard Crestez) - Fix imx6 probe failure on chips without separate PCI power domain (Leonard Crestez) * tag 'pci-v5.0-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: armada8k: Add support for gpio controlled reset signal" ARM: cns3xxx: Use actual size reads for PCIe ARM: cns3xxx: Fix writing to wrong PCI config registers after alignment PCI: imx: Fix checking pd_pcie_phy device link addition PCI: imx: Fix probe failure without power domain 01 February 2019, 07:06:17 UTC
f14bcc0 Baruch Siach 31 January 2019, 21:00:18 UTC Revert "PCI: armada8k: Add support for gpio controlled reset signal" Revert commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled reset signal"). That commit breaks boot on Macchiatobin board when a Mellanox NIC is present in the PCIe slot. It turns out that full reset cycle requires first comphy serdes initialization. Reset signal toggle without comphy initialization makes access to PCI configuration registers stall indefinitely. U-Boot toggles the Macchiatobin PCIe reset line already at boot, after initializing the comphy serdes. So while commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled reset signal") enables PCIe on platforms that U-Boot does not touch the reset line (like Clearfog GT-8K), it breaks PCIe (and boot) on the Macchiatobin board. Revert commit 3d71746c42 ("PCI: armada8k: Add support for gpio controlled reset signal") entirely to fix the Macchiatobin regression. Reported-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 31 January 2019, 21:07:29 UTC
432dd70 Koen Vandeputte 31 January 2019, 21:00:11 UTC ARM: cns3xxx: Use actual size reads for PCIe commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors") reimplemented cns3xxx_pci_read_config() using pci_generic_config_read32(), which preserved the property of only doing 32-bit reads. It also replaced cns3xxx_pci_write_config() with pci_generic_config_write(), so it changed writes from always being 32 bits to being the actual size, which works just fine. Given that: - The documentation does not mention that only 32 bit access is allowed. - Writes are already executed using the actual size - Extensive testing shows that 8b, 16b and 32b reads work as intended Allow read access of any size by replacing pci_generic_config_read32() with the pci_generic_config_read() accessors. Fixes: 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors") Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Acked-by: Arnd Bergmann <arnd@arndb.de> CC: Krzysztof Halasa <khalasa@piap.pl> CC: Olof Johansson <olof@lixom.net> CC: Robin Leblon <robin.leblon@ncentric.com> CC: Rob Herring <robh@kernel.org> CC: Russell King <linux@armlinux.org.uk> CC: Tim Harvey <tharvey@gateworks.com> 31 January 2019, 21:07:16 UTC
65dbb42 Koen Vandeputte 31 January 2019, 21:00:01 UTC ARM: cns3xxx: Fix writing to wrong PCI config registers after alignment Originally, cns3xxx used its own functions for mapping, reading and writing config registers. Commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors") removed the internal PCI config write function in favor of the generic one: cns3xxx_pci_write_config() --> pci_generic_config_write() cns3xxx_pci_write_config() expected aligned addresses, being produced by cns3xxx_pci_map_bus() while the generic one pci_generic_config_write() actually expects the real address as both the function and hardware are capable of byte-aligned writes. This currently leads to pci_generic_config_write() writing to the wrong registers. For instance, upon ath9k module loading: - driver ath9k gets loaded - The driver wants to write value 0xA8 to register PCI_LATENCY_TIMER, located at 0x0D - cns3xxx_pci_map_bus() aligns the address to 0x0C - pci_generic_config_write() effectively writes 0xA8 into register 0x0C (CACHE_LINE_SIZE) Fix the bug by removing the alignment in the cns3xxx mapping function. Fixes: 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Krzysztof Halasa <khalasa@piap.pl> Acked-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Arnd Bergmann <arnd@arndb.de> CC: stable@vger.kernel.org # v4.0+ CC: Bjorn Helgaas <bhelgaas@google.com> CC: Olof Johansson <olof@lixom.net> CC: Robin Leblon <robin.leblon@ncentric.com> CC: Rob Herring <robh@kernel.org> CC: Russell King <linux@armlinux.org.uk> 31 January 2019, 21:01:44 UTC
a4ace4f Leonard Crestez 31 January 2019, 20:59:56 UTC PCI: imx: Fix checking pd_pcie_phy device link addition The check on the device_link_add() return value is wrong; this leads to erroneous code execution, so fix it. Fixes: 3f7cceeab895 ("PCI: imx: Add multi-pd support") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 31 January 2019, 21:01:01 UTC
a6093ad Leonard Crestez 31 January 2019, 20:59:50 UTC PCI: imx: Fix probe failure without power domain On chips without a separate power domain for PCI (such as 6q/6qp) the imx6_pcie_attach_pd() function incorrectly returns an error. Fix by returning 0 if dev_pm_domain_attach_by_name() does not find anything. Fixes: 3f7cceeab895 ("PCI: imx: Add multi-pd support") Reported-by: Lukas F.Hartmann <lukas@mntmn.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> 31 January 2019, 20:59:50 UTC
e74c98c Andreas Gruenbacher 30 January 2019, 20:30:36 UTC gfs2: Revert "Fix loop in gfs2_rbm_find" This reverts commit 2d29f6b96d8f80322ed2dd895bca590491c38d34. It turns out that the fix can lead to a ~20 percent performance regression in initial writes to the page cache according to iozone. Let's revert this for now to have more time for a proper fix. Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 31 January 2019, 19:45:11 UTC
9f78956 Linus Torvalds 31 January 2019, 19:11:18 UTC Merge tag 'linux-kselftest-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This consists of run-time fixes to cpu-hotplug, and seccomp tests, compile fixes to ir, net, and timers Makefiles" * tag 'linux-kselftest-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: timers: use LDLIBS instead of LDFLAGS selftests: net: use LDLIBS instead of LDFLAGS selftests/seccomp: Enhance per-arch ptrace syscall skip tests selftests: Use lirc.h from kernel tree, not from system selftests: cpu-hotplug: fix case where CPUs offline > CPUs present 31 January 2019, 19:11:18 UTC
937108b Linus Torvalds 31 January 2019, 18:13:05 UTC Merge tag 'nfs-for-5.0-3' of git://git.linux-nfs.org/projects/anna/linux-nfs Pull NFS client fixes from Anna Schumaker: "This addresses two bugs, one in the error code handling of nfs_page_async_flush() and one to fix a potential NULL pointer dereference in nfs_parse_devname(). Stable bugfix: - Fix up return value on fatal errors in nfs_page_async_flush() Other bugfix: - Fix NULL pointer dereference of dev_name" * tag 'nfs-for-5.0-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS: Fix up return value on fatal errors in nfs_page_async_flush() nfs: Fix NULL pointer dereference of dev_name 31 January 2019, 18:13:05 UTC
83f4997 Linus Torvalds 31 January 2019, 18:00:00 UTC Merge tag 'sound-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Only three fixes. The fix for Realtek HD-audio looks lengthy, but it's just a code shuffling, and the actual changes are fairly small. The rest are a PCM core fix for a long-standing bug that was recently scratched by syzkaller, and a trivial USB-audio quirk for DSD support" * tag 'sound-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Fixed hp_pin no value ALSA: pcm: Fix tight loop of OSS capture stream ALSA: usb-audio: Add Opus #3 to quirks for native DSD support 31 January 2019, 18:00:00 UTC
1617971 Doug Smythies 30 January 2019, 16:28:22 UTC cpuidle: poll_state: Fix default time limit The default time is declared in units of microsecnds, but is used as nanoseconds, resulting in significant accounting errors for idle state 0 time when all idle states deeper than 0 are disabled. Under these unusual conditions, we don't really care about the poll time limit anyhow. Fixes: 800fb34a99ce ("cpuidle: poll_state: Disregard disable idle states") Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 30 January 2019, 21:57:42 UTC
15efb47 Vincent Guittot 30 January 2019, 17:26:02 UTC PM-runtime: Fix deadlock with ktime_get() A deadlock has been seen when swicthing clocksources which use PM-runtime. The call path is: change_clocksource ... write_seqcount_begin ... timekeeping_update ... sh_cmt_clocksource_enable ... rpm_resume pm_runtime_mark_last_busy ktime_get do read_seqcount_begin while read_seqcount_retry .... write_seqcount_end Although we should be safe because we haven't yet changed the clocksource at that time, we can't do that because of seqcount protection. Use ktime_get_mono_fast_ns() instead which is lock safe for such cases. With ktime_get_mono_fast_ns, the timestamp is not guaranteed to be monotonic across an update and as a result can goes backward. According to update_fast_timekeeper() description: "In the worst case, this can result is a slightly wrong timestamp (a few nanoseconds)". For PM-runtime autosuspend, this means only that the suspend decision may be slightly suboptimal. Fixes: 8234f6734c5d ("PM-runtime: Switch autosuspend over to using hrtimers") Reported-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 30 January 2019, 21:49:06 UTC
af0c9af Waiman Long 30 January 2019, 18:52:38 UTC fs/dcache: Track & report number of negative dentries The current dentry number tracking code doesn't distinguish between positive & negative dentries. It just reports the total number of dentries in the LRU lists. As excessive number of negative dentries can have an impact on system performance, it will be wise to track the number of positive and negative dentries separately. This patch adds tracking for the total number of negative dentries in the system LRU lists and reports it in the 5th field in the /proc/sys/fs/dentry-state file. The number, however, does not include negative dentries that are in flight but not in the LRU yet as well as those in the shrinker lists which are on the way out anyway. The number of positive dentries in the LRU lists can be roughly found by subtracting the number of negative dentries from the unused count. Matthew Wilcox had confirmed that since the introduction of the dentry_stat structure in 2.1.60, the dummy array was there, probably for future extension. They were not replacements of pre-existing fields. So no sane applications that read the value of /proc/sys/fs/dentry-state will do dummy thing if the last 2 fields of the sysctl parameter are not zero. IOW, it will be safe to use one of the dummy array entry for negative dentry count. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 January 2019, 19:02:11 UTC
7d10f70 Waiman Long 30 January 2019, 18:52:37 UTC fs: Don't need to put list_lru into its own cacheline The list_lru structure is essentially just a pointer to a table of per-node LRU lists. Even if CONFIG_MEMCG_KMEM is defined, the list field is just used for LRU list registration and shrinker_id is set at initialization. Those fields won't need to be touched that often. So there is no point to make the list_lru structures to sit in their own cachelines. Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 January 2019, 19:02:11 UTC
1dbd449 Waiman Long 30 January 2019, 18:52:36 UTC fs/dcache: Fix incorrect nr_dentry_unused accounting in shrink_dcache_sb() The nr_dentry_unused per-cpu counter tracks dentries in both the LRU lists and the shrink lists where the DCACHE_LRU_LIST bit is set. The shrink_dcache_sb() function moves dentries from the LRU list to a shrink list and subtracts the dentry count from nr_dentry_unused. This is incorrect as the nr_dentry_unused count will also be decremented in shrink_dentry_list() via d_shrink_del(). To fix this double decrement, the decrement in the shrink_dcache_sb() function is taken out. Fixes: 4e717f5c1083 ("list_lru: remove special case function list_lru_dispose_all." Cc: stable@kernel.org Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 January 2019, 19:02:11 UTC
1c0490c Linus Torvalds 30 January 2019, 17:30:03 UTC Merge tag 'iommu-fixes-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "A few more fixes this time: - Two patches to fix the error path of the map_sg implementation of the AMD IOMMU driver. - Also a missing IOTLB flush is fixed in the AMD IOMMU driver. - Memory leak fix for the Intel IOMMU driver. - Fix a regression in the Mediatek IOMMU driver which caused device initialization to fail (seen as broken HDMI output)" * tag 'iommu-fixes-v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix IOMMU page flush when detach device from a domain iommu/mediatek: Use correct fwspec in mtk_iommu_add_device() iommu/vt-d: Fix memory leak in intel_iommu_put_resv_regions() iommu/amd: Unmap all mapped pages in error path of map_sg iommu/amd: Call free_iova_fast with pfn in map_sg 30 January 2019, 17:30:03 UTC
877ef51 Linus Torvalds 30 January 2019, 17:23:21 UTC Merge tag 'gpio-v5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here is a bunch of GPIO fixes for the v5.0 series. I was helped out by Bartosz in collecting these fixes, for which I am very grateful, the biggest achievement in GPIO right now is work distribution. There is one serious core fix (timestamping) and a bunch of driver fixes: - Fix timestamps on nested IRQs - Handle IRQs properly in multiple instances of PCF857x - Use the right data register and IRQ type setting in the Spreadtrum GPIO driver - Let the value argument work properly when setting direction in the Altera GPIO driver - Mask interrupts properly in the vf610 driver" * tag 'gpio-v5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: vf610: Mask all GPIO interrupts gpio: altera-a10sr: Set proper output level for direction_output gpio: sprd: Fix incorrect irq type setting for the async EIC gpio: sprd: Fix the incorrect data register gpiolib: fix line event timestamps for nested irqs gpio: pcf857x: Fix interrupts on multiple instances 30 January 2019, 17:23:21 UTC
6296789 Linus Torvalds 30 January 2019, 01:11:47 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Need to save away the IV across tls async operations, from Dave Watson. 2) Upon successful packet processing, we should liberate the SKB with dev_consume_skb{_irq}(). From Yang Wei. 3) Only apply RX hang workaround on effected macb chips, from Harini Katakam. 4) Dummy netdev need a proper namespace assigned to them, from Josh Elsasser. 5) Some paths of nft_compat run lockless now, and thus we need to use a proper refcnt_t. From Florian Westphal. 6) Avoid deadlock in mlx5 by doing IRQ locking, from Moni Shoua. 7) netrom does not refcount sockets properly wrt. timers, fix that by using the sock timer API. From Cong Wang. 8) Fix locking of inexact inserts of xfrm policies, from Florian Westphal. 9) Missing xfrm hash generation bump, also from Florian. 10) Missing of_node_put() in hns driver, from Yonglong Liu. 11) Fix DN_IFREQ_SIZE, from Johannes Berg. 12) ip6mr notifier is invoked during traversal of wrong table, from Nir Dotan. 13) TX promisc settings not performed correctly in qed, from Manish Chopra. 14) Fix OOB access in vhost, from Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) MAINTAINERS: Add entry for XDP (eXpress Data Path) net: set default network namespace in init_dummy_netdev() net: b44: replace dev_kfree_skb_xxx by dev_consume_skb_xxx for drop profiles net: caif: call dev_consume_skb_any when skb xmit done net: 8139cp: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: macb: Apply RXUBR workaround only to versions with errata net: ti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: apple: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: amd8111e: replace dev_kfree_skb_irq by dev_consume_skb_irq net: alteon: replace dev_kfree_skb_irq by dev_consume_skb_irq net: tls: Fix deadlock in free_resources tx net: tls: Save iv in tls_rec for async crypto requests vhost: fix OOB in get_rx_bufs() qed: Fix stack out of bounds bug qed: Fix system crash in ll2 xmit qed: Fix VF probe failure while FLR qed: Fix LACP pdu drops for VFs qed: Fix bug in tx promiscuous mode settings net: i825xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles netfilter: ipt_CLUSTERIP: fix warning unused variable cn ... 30 January 2019, 01:11:47 UTC
8fc75be Trond Myklebust 29 January 2019, 20:52:55 UTC NFS: Fix up return value on fatal errors in nfs_page_async_flush() Ensure that we return the fatal error value that caused us to exit nfs_page_async_flush(). Fixes: c373fff7bd25 ("NFSv4: Don't special case "launder"") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.12+ Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 29 January 2019, 21:33:24 UTC
7b21b69 Yishai Hadas 27 January 2019, 08:11:27 UTC IB/uverbs: Fix OOPs in uverbs_user_mmap_disassociate The vma->vm_mm can become impossible to get before rdma_umap_close() is called, in this case we must not try to get an mm that is already undergoing process exit. In this case there is no need to wait for anything as the VMA will be destroyed by another thread soon and is already effectively 'unreachable' by userspace. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 800000012bc50067 P4D 800000012bc50067 PUD 129db5067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 2050 Comm: bash Tainted: G W OE 4.20.0-rc6+ #3 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__rb_erase_color+0xb9/0x280 Code: 84 17 01 00 00 48 3b 68 10 0f 84 15 01 00 00 48 89 58 08 48 89 de 48 89 ef 4c 89 e3 e8 90 84 22 00 e9 60 ff ff ff 48 8b 5d 10 <f6> 03 01 0f 84 9c 00 00 00 48 8b 43 10 48 85 c0 74 09 f6 00 01 0f RSP: 0018:ffffbecfc090bab8 EFLAGS: 00010246 RAX: ffff97616346cf30 RBX: 0000000000000000 RCX: 0000000000000101 RDX: 0000000000000000 RSI: ffff97623b6ca828 RDI: ffff97621ef10828 RBP: ffff97621ef10828 R08: ffff97621ef10828 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff97623b6ca838 R13: ffffffffbb3fef50 R14: ffff97623b6ca828 R15: 0000000000000000 FS: 00007f7a5c31d740(0000) GS:ffff97623bb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000011255a000 CR4: 00000000000006e0 Call Trace: unlink_file_vma+0x3b/0x50 free_pgtables+0xa1/0x110 exit_mmap+0xca/0x1a0 ? mlx5_ib_dealloc_pd+0x28/0x30 [mlx5_ib] mmput+0x54/0x140 uverbs_user_mmap_disassociate+0xcc/0x160 [ib_uverbs] uverbs_destroy_ufile_hw+0xf7/0x120 [ib_uverbs] ib_uverbs_remove_one+0xea/0x240 [ib_uverbs] ib_unregister_device+0xfb/0x200 [ib_core] mlx5_ib_remove+0x51/0xe0 [mlx5_ib] mlx5_remove_device+0xc1/0xd0 [mlx5_core] mlx5_unregister_device+0x3d/0xb0 [mlx5_core] remove_one+0x2a/0x90 [mlx5_core] pci_device_remove+0x3b/0xc0 device_release_driver_internal+0x16d/0x240 unbind_store+0xb2/0x100 kernfs_fop_write+0x102/0x180 __vfs_write+0x36/0x1a0 ? __alloc_fd+0xa9/0x170 ? set_close_on_exec+0x49/0x70 vfs_write+0xad/0x1a0 ksys_write+0x52/0xc0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Cc: <stable@vger.kernel.org> # 4.19 Fixes: 5f9794dc94f5 ("RDMA/ucontext: Add a core API for mmaping driver IO memory") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 29 January 2019, 20:57:22 UTC
d07e1e0 Jesper Dangaard Brouer 29 January 2019, 13:22:33 UTC MAINTAINERS: Add entry for XDP (eXpress Data Path) Add multiple people as maintainers for XDP, sorted alphabetically. XDP is also tied to driver level support and code, but we cannot add all drivers to the list. Instead K: and N: match on 'xdp' in hope to catch some of those changes in drivers. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2019, 19:40:51 UTC
35edfdc Josh Elsasser 26 January 2019, 22:38:33 UTC net: set default network namespace in init_dummy_netdev() Assign a default net namespace to netdevs created by init_dummy_netdev(). Fixes a NULL pointer dereference caused by busy-polling a socket bound to an iwlwifi wireless device, which bumps the per-net BUSYPOLLRXPACKETS stat if napi_poll() received packets: BUG: unable to handle kernel NULL pointer dereference at 0000000000000190 IP: napi_busy_loop+0xd6/0x200 Call Trace: sock_poll+0x5e/0x80 do_sys_poll+0x324/0x5a0 SyS_poll+0x6c/0xf0 do_syscall_64+0x6b/0x1f0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 7db6b048da3b ("net: Commonize busy polling code to focus on napi_id instead of socket") Signed-off-by: Josh Elsasser <jelsasser@appneta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2019, 19:29:55 UTC
0f0ed82 Yang Wei 29 January 2019, 15:04:40 UTC net: b44: replace dev_kfree_skb_xxx by dev_consume_skb_xxx for drop profiles The skb should be freed by dev_consume_skb_any() in b44_start_xmit() when bounce_skb is used. The skb is be replaced by bounce_skb, so the original skb should be consumed(not drop). dev_consume_skb_irq() should be called in b44_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2019, 18:11:42 UTC
e339f86 Yang Wei 29 January 2019, 15:32:22 UTC net: caif: call dev_consume_skb_any when skb xmit done The skb shouled be consumed when xmit done, it makes drop profiles (dropwatch, perf) more friendly. dev_kfree_skb_irq()/kfree_skb() shouled be replaced by dev_consume_skb_any(), it makes code cleaner. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2019, 18:09:28 UTC
896cebc Yang Wei 29 January 2019, 14:40:51 UTC net: 8139cp: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in cp_tx() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2019, 18:03:50 UTC
e501070 Harini Katakam 29 January 2019, 09:50:03 UTC net: macb: Apply RXUBR workaround only to versions with errata The interrupt handler contains a workaround for RX hang applicable to Zynq and AT91RM9200 only. Subsequent versions do not need this workaround. This workaround unnecessarily resets RX whenever RX used bit read is observed, which can be often under heavy traffic. There is no other action performed on RX UBR interrupt. Hence introduce a CAPS mask; enable this interrupt and workaround only on affected versions. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2019, 17:41:04 UTC
693abe1 Kailang Yang 29 January 2019, 07:38:21 UTC ALSA: hda/realtek - Fixed hp_pin no value Fix hp_pin always no value. [More notes on the changes: The hp_pin value that is referred in alc294_hp_init() is always zero at the moment the function gets called, hence this is actually useless as in the current code. And, this kind of init sequence should be called from the codec init callback, instead of the parser function. So, the first fix in this patch to move the call call into its own init_hook. OTOH, this function is needed to be called only once after the boot, and it'd take too long for invoking at each resume (where the init callback gets called). So we add a new flag and invoke this only once as an additional fix. The one case is still not covered, though: S4 resume. But this change itself won't lead to any regression in that regard, so we leave S4 issue as is for now and fix it later. -- tiwai ] Fixes: bde1a7459623 ("ALSA: hda/realtek - Fixed headphone issue for ALC700") Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 29 January 2019, 15:33:08 UTC
0ee4b5f Sinan Kaya 24 January 2019, 19:31:01 UTC platform/x86: Fix unmet dependency warning for SAMSUNG_Q10 Add BACKLIGHT_LCD_SUPPORT for SAMSUNG_Q10 to fix the warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE. SAMSUNG_Q10 selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_LCD_SUPPORT. Copy BACKLIGHT_LCD_SUPPORT dependency into SAMSUNG_Q10 to fix: WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n] Selected by [y]: - SAMSUNG_Q10 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 29 January 2019, 09:59:07 UTC
d58bf90 Sinan Kaya 24 January 2019, 19:31:00 UTC platform/x86: Fix unmet dependency warning for ACPI_CMPC Add BACKLIGHT_LCD_SUPPORT for ACPI_CMPC to fix the warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE. ACPI_CMPC selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_LCD_SUPPORT. Copy BACKLIGHT_LCD_SUPPORT dependency into ACPI_CMPC to fix WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n] Selected by [y]: - ACPI_CMPC [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] && INPUT [=y] && (RFKILL [=n] || RFKILL [=n]=n) Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 29 January 2019, 09:59:07 UTC
9baddb6 Sinan Kaya 21 January 2019, 23:19:57 UTC mfd: Fix unmet dependency warning for MFD_TPS68470 After commit 5d32a66541c4 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") dependencies on CONFIG_PCI that previously were satisfied implicitly through dependencies on CONFIG_ACPI have to be specified directly. WARNING: unmet direct dependencies detected for I2C_DESIGNWARE_PLATFORM Depends on [n]: I2C [=y] && HAS_IOMEM [=y] && (ACPI [=y] && COMMON_CLK [=n] || !ACPI [=y]) Selected by [y]: - MFD_TPS68470 [=y] && HAS_IOMEM [=y] && ACPI [=y] && I2C [=y]=y MFD_TPS68470 is an ACPI only device and selects I2C_DESIGNWARE_PLATFORM. I2C_DESIGNWARE_PLATFORM does not have any configuration today for ACPI support without CONFIG_PCI set. For sake of a quick fix this introduces a new mandatory dependency to the driver which may survive without it. Otherwise we need to revisit the driver architecture to address this properly. Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 29 January 2019, 09:55:34 UTC
b3379a4 Yang Wei 28 January 2019, 23:40:10 UTC net: ti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in cpmac_end_xmit() when xmit done. It makes drop profiles more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2019, 07:09:19 UTC
1000911 Yang Wei 28 January 2019, 23:39:13 UTC net: apple: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in bmac_txdma_intr() when xmit done. It makes drop profiles more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2019, 07:09:19 UTC
3afa73d Yang Wei 27 January 2019, 15:58:25 UTC net: amd8111e: replace dev_kfree_skb_irq by dev_consume_skb_irq dev_consume_skb_irq() should be called in amd8111e_tx() when xmit done. It makes drop profiles more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2019, 07:09:19 UTC
f48af11 Yang Wei 27 January 2019, 15:56:34 UTC net: alteon: replace dev_kfree_skb_irq by dev_consume_skb_irq dev_consume_skb_irq() should be called in ace_tx_int() when xmit done. It makes drop profiles more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2019, 07:09:19 UTC
1023121 Dave Watson 27 January 2019, 00:59:03 UTC net: tls: Fix deadlock in free_resources tx If there are outstanding async tx requests (when crypto returns EINPROGRESS), there is a potential deadlock: the tx work acquires the lock, while we cancel_delayed_work_sync() while holding the lock. Drop the lock while waiting for the work to complete. Fixes: a42055e8d2c30 ("Add support for async encryption of records...") Signed-off-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2019, 07:07:08 UTC
32eb67b Dave Watson 27 January 2019, 00:57:38 UTC net: tls: Save iv in tls_rec for async crypto requests aead_request_set_crypt takes an iv pointer, and we change the iv soon after setting it. Some async crypto algorithms don't save the iv, so we need to save it in the tls_rec for async requests. Found by hardcoding x64 aesni to use async crypto manager (to test the async codepath), however I don't think this combination can happen in the wild. Presumably other hardware offloads will need this fix, but there have been no user reports. Fixes: a42055e8d2c30 ("Add support for async encryption of records...") Signed-off-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2019, 07:05:55 UTC
b46a0bf Jason Wang 28 January 2019, 07:05:05 UTC vhost: fix OOB in get_rx_bufs() After batched used ring updating was introduced in commit e2b3b35eb989 ("vhost_net: batch used ring update in rx"). We tend to batch heads in vq->heads for more than one packet. But the quota passed to get_rx_bufs() was not correctly limited, which can result a OOB write in vq->heads. headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx, vhost_len, &in, vq_log, &log, likely(mergeable) ? UIO_MAXIOV : 1); UIO_MAXIOV was still used which is wrong since we could have batched used in vq->heads, this will cause OOB if the next buffer needs more than 960 (1024 (UIO_MAXIOV) - 64 (VHOST_NET_BATCH)) heads after we've batched 64 (VHOST_NET_BATCH) heads: Acked-by: Stefan Hajnoczi <stefanha@redhat.com> ============================================================================= BUG kmalloc-8k (Tainted: G B ): Redzone overwritten ----------------------------------------------------------------------------- INFO: 0x00000000fd93b7a2-0x00000000f0713384. First byte 0xa9 instead of 0xcc INFO: Allocated in alloc_pd+0x22/0x60 age=3933677 cpu=2 pid=2674 kmem_cache_alloc_trace+0xbb/0x140 alloc_pd+0x22/0x60 gen8_ppgtt_create+0x11d/0x5f0 i915_ppgtt_create+0x16/0x80 i915_gem_create_context+0x248/0x390 i915_gem_context_create_ioctl+0x4b/0xe0 drm_ioctl_kernel+0xa5/0xf0 drm_ioctl+0x2ed/0x3a0 do_vfs_ioctl+0x9f/0x620 ksys_ioctl+0x6b/0x80 __x64_sys_ioctl+0x11/0x20 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 INFO: Slab 0x00000000d13e87af objects=3 used=3 fp=0x (null) flags=0x200000000010201 INFO: Object 0x0000000003278802 @offset=17064 fp=0x00000000e2e6652b Fixing this by allocating UIO_MAXIOV + VHOST_NET_BATCH iovs for vhost-net. This is done through set the limitation through vhost_dev_init(), then set_owner can allocate the number of iov in a per device manner. This fixes CVE-2018-16880. Fixes: e2b3b35eb989 ("vhost_net: batch used ring update in rx") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 29 January 2019, 06:53:09 UTC
bfe2599 David S. Miller 28 January 2019, 19:13:35 UTC Merge branch 'qed-Bug-fixes' Manish Chopra says: ==================== qed: Bug fixes This series have SR-IOV and some general fixes. Please consider applying it to "net" ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 19:13:35 UTC
ffb057f Manish Chopra 28 January 2019, 18:05:08 UTC qed: Fix stack out of bounds bug KASAN reported following bug in qed_init_qm_get_idx_from_flags due to inappropriate casting of "pq_flags". Fix the type of "pq_flags". [ 196.624707] BUG: KASAN: stack-out-of-bounds in qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed] [ 196.624712] Read of size 8 at addr ffff809b00bc7360 by task kworker/0:9/1712 [ 196.624714] [ 196.624720] CPU: 0 PID: 1712 Comm: kworker/0:9 Not tainted 4.18.0-60.el8.aarch64+debug #1 [ 196.624723] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL024 09/26/2018 [ 196.624733] Workqueue: events work_for_cpu_fn [ 196.624738] Call trace: [ 196.624742] dump_backtrace+0x0/0x2f8 [ 196.624745] show_stack+0x24/0x30 [ 196.624749] dump_stack+0xe0/0x11c [ 196.624755] print_address_description+0x68/0x260 [ 196.624759] kasan_report+0x178/0x340 [ 196.624762] __asan_report_load_n_noabort+0x38/0x48 [ 196.624786] qed_init_qm_get_idx_from_flags+0x1a4/0x1b8 [qed] [ 196.624808] qed_init_qm_info+0xec0/0x2200 [qed] [ 196.624830] qed_resc_alloc+0x284/0x7e8 [qed] [ 196.624853] qed_slowpath_start+0x6cc/0x1ae8 [qed] [ 196.624864] __qede_probe.isra.10+0x1cc/0x12c0 [qede] [ 196.624874] qede_probe+0x78/0xf0 [qede] [ 196.624879] local_pci_probe+0xc4/0x180 [ 196.624882] work_for_cpu_fn+0x54/0x98 [ 196.624885] process_one_work+0x758/0x1900 [ 196.624888] worker_thread+0x4e0/0xd18 [ 196.624892] kthread+0x2c8/0x350 [ 196.624897] ret_from_fork+0x10/0x18 [ 196.624899] [ 196.624902] Allocated by task 2: [ 196.624906] kasan_kmalloc.part.1+0x40/0x108 [ 196.624909] kasan_kmalloc+0xb4/0xc8 [ 196.624913] kasan_slab_alloc+0x14/0x20 [ 196.624916] kmem_cache_alloc_node+0x1dc/0x480 [ 196.624921] copy_process.isra.1.part.2+0x1d8/0x4a98 [ 196.624924] _do_fork+0x150/0xfa0 [ 196.624926] kernel_thread+0x48/0x58 [ 196.624930] kthreadd+0x3a4/0x5a0 [ 196.624932] ret_from_fork+0x10/0x18 [ 196.624934] [ 196.624937] Freed by task 0: [ 196.624938] (stack is not available) [ 196.624940] [ 196.624943] The buggy address belongs to the object at ffff809b00bc0000 [ 196.624943] which belongs to the cache thread_stack of size 32768 [ 196.624946] The buggy address is located 29536 bytes inside of [ 196.624946] 32768-byte region [ffff809b00bc0000, ffff809b00bc8000) [ 196.624948] The buggy address belongs to the page: [ 196.624952] page:ffff7fe026c02e00 count:1 mapcount:0 mapping:ffff809b4001c000 index:0x0 compound_mapcount: 0 [ 196.624960] flags: 0xfffff8000008100(slab|head) [ 196.624967] raw: 0fffff8000008100 dead000000000100 dead000000000200 ffff809b4001c000 [ 196.624970] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 [ 196.624973] page dumped because: kasan: bad access detected [ 196.624974] [ 196.624976] Memory state around the buggy address: [ 196.624980] ffff809b00bc7200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624983] ffff809b00bc7280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624985] >ffff809b00bc7300: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 [ 196.624988] ^ [ 196.624990] ffff809b00bc7380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624993] ffff809b00bc7400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 196.624995] ================================================================== Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 19:13:34 UTC
7c81626 Manish Chopra 28 January 2019, 18:05:07 UTC qed: Fix system crash in ll2 xmit Cache number of fragments in the skb locally as in case of linear skb (with zero fragments), tx completion (or freeing of skb) may happen before driver tries to get number of frgaments from the skb which could lead to stale access to an already freed skb. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 19:13:34 UTC
327852e Manish Chopra 28 January 2019, 18:05:06 UTC qed: Fix VF probe failure while FLR VFs may hit VF-PF channel timeout while probing, as in some cases it was observed that VF FLR and VF "acquire" message transaction (i.e first message from VF to PF in VF's probe flow) could occur simultaneously which could lead VF to fail sending "acquire" message to PF as VF is marked disabled from HW perspective due to FLR, which will result into channel timeout and VF probe failure. In such cases, try retrying VF "acquire" message so that in later attempts it could be successful to pass message to PF after the VF FLR is completed and can be probed successfully. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 19:13:34 UTC
ff92969 Manish Chopra 28 January 2019, 18:05:05 UTC qed: Fix LACP pdu drops for VFs VF is always configured to drop control frames (with reserved mac addresses) but to work LACP on the VFs, it would require LACP control frames to be forwarded or transmitted successfully. This patch fixes this in such a way that trusted VFs (marked through ndo_set_vf_trust) would be allowed to pass the control frames such as LACP pdus. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 19:13:34 UTC
9e71a15 Manish Chopra 28 January 2019, 18:05:04 UTC qed: Fix bug in tx promiscuous mode settings When running tx switched traffic between VNICs created via a bridge(to which VFs are added), adapter drops the unicast packets in tx flow due to VNIC's ucast mac being unknown to it. But VF interfaces being in promiscuous mode should have caused adapter to accept all the unknown ucast packets. Later, it was found that driver doesn't really configure tx promiscuous mode settings to accept all unknown unicast macs. This patch fixes tx promiscuous mode settings to accept all unknown/unmatched unicast macs and works out the scenario. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 19:13:34 UTC
ca89932 Yang Wei 28 January 2019, 14:42:25 UTC net: i825xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles dev_consume_skb_irq() should be called in i596_interrupt() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <albin_yang@163.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 18:53:28 UTC
ff44a83 David S. Miller 28 January 2019, 18:51:51 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree: 1) The nftnl mutex is now per-netns, therefore use reference counter for matches and targets to deal with concurrent updates from netns. Moreover, place extensions in a pernet list. Patches from Florian Westphal. 2) Bail out with EINVAL in case of negative timeouts via setsockopt() through ip_vs_set_timeout(), from ZhangXiaoxu. 3) Spurious EINVAL on ebtables 32bit binary with 64bit kernel, also from Florian. 4) Reset TCP option header parser in case of fingerprint mismatch, otherwise follow up overlapping fingerprint definitions including TCP options do not work, from Fernando Fernandez Mancera. 5) Compilation warning in ipt_CLUSTER with CONFIG_PROC_FS unset. From Anders Roxell. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 18:51:51 UTC
4aa9fc2 Michal Hocko 25 January 2019, 18:08:58 UTC Revert "mm, memory_hotplug: initialize struct pages for the full memory section" This reverts commit 2830bf6f05fb3e05bc4743274b806c821807a684. The underlying assumption that one sparse section belongs into a single numa node doesn't hold really. Robert Shteynfeld has reported a boot failure. The boot log was not captured but his memory layout is as follows: Early memory node ranges node 1: [mem 0x0000000000001000-0x0000000000090fff] node 1: [mem 0x0000000000100000-0x00000000dbdf8fff] node 1: [mem 0x0000000100000000-0x0000001423ffffff] node 0: [mem 0x0000001424000000-0x0000002023ffffff] This means that node0 starts in the middle of a memory section which is also in node1. memmap_init_zone tries to initialize padding of a section even when it is outside of the given pfn range because there are code paths (e.g. memory hotplug) which assume that the full worth of memory section is always initialized. In this particular case, though, such a range is already intialized and most likely already managed by the page allocator. Scribbling over those pages corrupts the internal state and likely blows up when any of those pages gets used. Reported-by: Robert Shteynfeld <robert.shteynfeld@gmail.com> Fixes: 2830bf6f05fb ("mm, memory_hotplug: initialize struct pages for the full memory section") Cc: stable@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 28 January 2019, 18:35:22 UTC
80ff001 Yao Liu 28 January 2019, 11:44:14 UTC nfs: Fix NULL pointer dereference of dev_name There is a NULL pointer dereference of dev_name in nfs_parse_devname() The oops looks something like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:nfs_fs_mount+0x3b6/0xc20 [nfs] ... Call Trace: ? ida_alloc_range+0x34b/0x3d0 ? nfs_clone_super+0x80/0x80 [nfs] ? nfs_free_parsed_mount_data+0x60/0x60 [nfs] mount_fs+0x52/0x170 ? __init_waitqueue_head+0x3b/0x50 vfs_kern_mount+0x6b/0x170 do_mount+0x216/0xdc0 ksys_mount+0x83/0xd0 __x64_sys_mount+0x25/0x30 do_syscall_64+0x65/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix this by adding a NULL check on dev_name Signed-off-by: Yao Liu <yotta.liu@ucloud.cn> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> 28 January 2019, 17:08:30 UTC
7d4e591 Fathi Boudra 16 January 2019, 17:43:20 UTC selftests: timers: use LDLIBS instead of LDFLAGS posix_timers fails to build due to undefined reference errors: aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey -O2 -pipe -g -feliminate-unused-debug-types -O3 -Wl,-no-as-needed -Wall -DKTEST -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lrt -lpthread posix_timers.c -o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers /tmp/cc1FTZzT.o: In function `check_timer_create': /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:157: undefined reference to `timer_create' /usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:170: undefined reference to `timer_settime' collect2: error: ld returned 1 exit status It's GNU Make and linker specific. The default Makefile rule looks like: $(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS) When linking is done by gcc itself, no issue, but when it needs to be passed to proper ld, only LDLIBS follows and then ld cannot know what libs to link with. More detail: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html LDFLAGS Extra flags to give to compilers when they are supposed to invoke the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable instead. LDLIBS Library flags or names given to compilers when they are supposed to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS variable. https://lkml.org/lkml/2010/2/10/362 tools/perf: libraries must come after objects Link order matters, use LDLIBS instead of LDFLAGS to properly link against libpthread. Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org> Signed-off-by: Shuah Khan <shuah@kernel.org> 28 January 2019, 15:02:12 UTC
870f193 Fathi Boudra 16 January 2019, 17:43:18 UTC selftests: net: use LDLIBS instead of LDFLAGS reuseport_bpf_numa fails to build due to undefined reference errors: aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lnuma reuseport_bpf_numa.c -o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa /tmp/ccfUuExT.o: In function `send_from_node': /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:138: undefined reference to `numa_run_on_node' /tmp/ccfUuExT.o: In function `main': /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:230: undefined reference to `numa_available' /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/net/reuseport_bpf_numa.c:233: undefined reference to `numa_max_node' It's GNU Make and linker specific. The default Makefile rule looks like: $(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS) When linking is done by gcc itself, no issue, but when it needs to be passed to proper ld, only LDLIBS follows and then ld cannot know what libs to link with. More detail: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html LDFLAGS Extra flags to give to compilers when they are supposed to invoke the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable instead. LDLIBS Library flags or names given to compilers when they are supposed to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS variable. https://lkml.org/lkml/2010/2/10/362 tools/perf: libraries must come after objects Link order matters, use LDLIBS instead of LDFLAGS to properly link against libnuma. Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org> Signed-off-by: Shuah Khan <shuah@kernel.org> 28 January 2019, 15:02:12 UTC
7ae710f Andrew Lunn 27 January 2019, 21:58:00 UTC gpio: vf610: Mask all GPIO interrupts On SoC reset all GPIO interrupts are disable. However, if kexec is used to boot into a new kernel, the SoC does not experience a reset. Hence GPIO interrupts can be left enabled from the previous kernel. It is then possible for the interrupt to fire before an interrupt handler is registered, resulting in the kernel complaining of an "unexpected IRQ trap", the interrupt is never cleared, and so fires again, resulting in an interrupt storm. Disable all GPIO interrupts before registering the GPIO IRQ chip. Fixes: 7f2691a19627 ("gpio: vf610: add gpiolib/IRQ chip driver for Vybrid") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 28 January 2019, 14:28:43 UTC
3751e00 Chaotian Jing 23 January 2019, 12:05:25 UTC mmc: mediatek: fix incorrect register setting of hs400_cmd_int_delay to set cmd internal delay, need set PAD_TUNE register but not PAD_CMD_TUNE register. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Fixes: 1ede5cb88a29 ("mmc: mediatek: Use data tune for CMD line tune") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 28 January 2019, 11:49:28 UTC
8c9620b Lukas Wunner 19 January 2019, 15:31:00 UTC mmc: bcm2835: Fix DMA channel leak on probe error The BCM2835 MMC host driver requests a DMA channel on probe but neglects to release the channel in the probe error path. The channel may therefore be leaked, in particular if devm_clk_get() causes probe deferral. Fix it. Fixes: 660fc733bd74 ("mmc: bcm2835: Add new driver for the sdhost controller.") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.12+ Cc: Frank Pavlic <f.pavlic@kunbus.de> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 28 January 2019, 11:43:19 UTC
206b8cc Anders Roxell 23 January 2019, 11:48:11 UTC netfilter: ipt_CLUSTERIP: fix warning unused variable cn When CONFIG_PROC_FS isn't set the variable cn isn't used. net/ipv4/netfilter/ipt_CLUSTERIP.c: In function ‘clusterip_net_exit’: net/ipv4/netfilter/ipt_CLUSTERIP.c:849:24: warning: unused variable ‘cn’ [-Wunused-variable] struct clusterip_net *cn = clusterip_pernet(net); ^~ Rework so the variable 'cn' is declared inside "#ifdef CONFIG_PROC_FS". Fixes: b12f7bad5ad3 ("netfilter: ipt_CLUSTERIP: remove wrong WARN_ON_ONCE in netns exit routine") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 28 January 2019, 10:09:12 UTC
1a6a095 Fernando Fernandez Mancera 21 January 2019, 11:53:21 UTC netfilter: nfnetlink_osf: add missing fmatch check When we check the tcp options of a packet and it doesn't match the current fingerprint, the tcp packet option pointer must be restored to its initial value in order to do the proper tcp options check for the next fingerprint. Here we can see an example. Assumming the following fingerprint base with two lines: S10:64:1:60:M*,S,T,N,W6: Linux:3.0::Linux 3.0 S20:64:1:60:M*,S,T,N,W7: Linux:4.19:arch:Linux 4.1 Where TCP options are the last field in the OS signature, all of them overlap except by the last one, ie. 'W6' versus 'W7'. In case a packet for Linux 4.19 kicks in, the osf finds no matching because the TCP options pointer is updated after checking for the TCP options in the first line. Therefore, reset pointer back to where it should be. Fixes: 11eeef41d5f6 ("netfilter: passive OS fingerprint xtables match") Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 28 January 2019, 10:09:11 UTC
2035f3f Florian Westphal 21 January 2019, 20:54:36 UTC netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present Unlike ip(6)tables ebtables only counts user-defined chains. The effect is that a 32bit ebtables binary on a 64bit kernel can do 'ebtables -N FOO' only after adding at least one rule, else the request fails with -EINVAL. This is a similar fix as done in 3f1e53abff84 ("netfilter: ebtables: don't attempt to allocate 0-sized compat array"). Fixes: 7d7d7e02111e9 ("netfilter: compat: reject huge allocation requests") Reported-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> 28 January 2019, 09:49:43 UTC
6fb6e63 Andrew Lunn 27 January 2019, 21:48:00 UTC net: dsa: mv88e6xxx: Fix serdes irq setup going recursive Duec to a typo, mv88e6390_serdes_irq_setup() calls itself, rather than mv88e6390x_serdes_irq_setup(). It then blows the stack, and shortly after the machine blows up. Fixes: 2defda1f4b91 ("net: dsa: mv88e6xxx: Add support for SERDES on ports 2-8 for 6390X") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 07:19:19 UTC
146820c Nir Dotan 27 January 2019, 07:26:22 UTC ip6mr: Fix notifiers call on mroute_clean_tables() When the MC route socket is closed, mroute_clean_tables() is called to cleanup existing routes. Mistakenly notifiers call was put on the cleanup of the unresolved MC route entries cache. In a case where the MC socket closes before an unresolved route expires, the notifier call leads to a crash, caused by the driver trying to increment a non initialized refcount_t object [1] and then when handling is done, to decrement it [2]. This was detected by a test recently added in commit 6d4efada3b82 ("selftests: forwarding: Add multicast routing test"). Fix that by putting notifiers call on the resolved entries traversal, instead of on the unresolved entries traversal. [1] [ 245.748967] refcount_t: increment on 0; use-after-free. [ 245.754829] WARNING: CPU: 3 PID: 3223 at lib/refcount.c:153 refcount_inc_checked+0x2b/0x30 ... [ 245.802357] Hardware name: Mellanox Technologies Ltd. MSN2740/SA001237, BIOS 5.6.5 06/07/2016 [ 245.811873] RIP: 0010:refcount_inc_checked+0x2b/0x30 ... [ 245.907487] Call Trace: [ 245.910231] mlxsw_sp_router_fib_event.cold.181+0x42/0x47 [mlxsw_spectrum] [ 245.917913] notifier_call_chain+0x45/0x7 [ 245.922484] atomic_notifier_call_chain+0x15/0x20 [ 245.927729] call_fib_notifiers+0x15/0x30 [ 245.932205] mroute_clean_tables+0x372/0x3f [ 245.936971] ip6mr_sk_done+0xb1/0xc0 [ 245.940960] ip6_mroute_setsockopt+0x1da/0x5f0 ... [2] [ 246.128487] refcount_t: underflow; use-after-free. [ 246.133859] WARNING: CPU: 0 PID: 7 at lib/refcount.c:187 refcount_sub_and_test_checked+0x4c/0x60 [ 246.183521] Hardware name: Mellanox Technologies Ltd. MSN2740/SA001237, BIOS 5.6.5 06/07/2016 ... [ 246.193062] Workqueue: mlxsw_core_ordered mlxsw_sp_router_fibmr_event_work [mlxsw_spectrum] [ 246.202394] RIP: 0010:refcount_sub_and_test_checked+0x4c/0x60 ... [ 246.298889] Call Trace: [ 246.301617] refcount_dec_and_test_checked+0x11/0x20 [ 246.307170] mlxsw_sp_router_fibmr_event_work.cold.196+0x47/0x78 [mlxsw_spectrum] [ 246.315531] process_one_work+0x1fa/0x3f0 [ 246.320005] worker_thread+0x2f/0x3e0 [ 246.324083] kthread+0x118/0x130 [ 246.327683] ? wq_update_unbound_numa+0x1b0/0x1b0 [ 246.332926] ? kthread_park+0x80/0x80 [ 246.337013] ret_from_fork+0x1f/0x30 Fixes: 088aa3eec2ce ("ip6mr: Support fib notifications") Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 07:16:07 UTC
50c2936 Johannes Berg 26 January 2019, 20:12:19 UTC decnet: fix DN_IFREQ_SIZE Digging through the ioctls with Al because of the previous patches, we found that on 64-bit decnet's dn_dev_ioctl() is wrong, because struct ifreq::ifr_ifru is actually 24 bytes (not 16 as expected from struct sockaddr) due to the ifru_map and ifru_settings members. Clearly, decnet expects the ioctl to be called with a struct like struct ifreq_dn { char ifr_name[IFNAMSIZ]; struct sockaddr_dn ifr_addr; }; since it does struct ifreq *ifr = ...; struct sockaddr_dn *sdn = (struct sockaddr_dn *)&ifr->ifr_addr; This means that DN_IFREQ_SIZE is too big for what it wants on 64-bit, as it is sizeof(struct ifreq) - sizeof(struct sockaddr) + sizeof(struct sockaddr_dn) This assumes that sizeof(struct sockaddr) is the size of ifr_ifru but that isn't true. Fix this to use offsetof(struct ifreq, ifr_ifru). This indeed doesn't really matter much - the result is that we copy in/out 8 bytes more than we should on 64-bit platforms. In case the "struct ifreq_dn" lands just on the end of a page though it might lead to faults. As far as I can tell, it has been like this forever, so it seems very likely that nobody cares. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 07:11:55 UTC
c69c29a Alexey Khoroshilov 26 January 2019, 19:48:57 UTC net: stmmac: dwmac-rk: fix error handling in rk_gmac_powerup() If phy_power_on() fails in rk_gmac_powerup(), clocks are left enabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 07:03:38 UTC
417c804 David S. Miller 28 January 2019, 07:01:56 UTC Merge branch 'hns-fixes' Peng Li says: ==================== net: hns: code optimizations & bugfixes for HNS driver This patchset includes bugfixes and code optimizations for the HNS ethernet controller driver ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 07:01:56 UTC
cec8abb Yonglong Liu 26 January 2019, 09:18:27 UTC net: hns: Fix wrong read accesses via Clause 45 MDIO protocol When reading phy registers via Clause 45 MDIO protocol, after write address operation, the driver use another write address operation, so can not read the right value of any phy registers. This patch fixes it. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 07:01:56 UTC
ed29ca8 Yonglong Liu 26 January 2019, 09:18:26 UTC net: hns: Restart autoneg need return failed when autoneg off The hns driver of earlier devices, when autoneg off, restart autoneg will return -EINVAL, so make the hns driver for the latest devices do the same. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 07:01:56 UTC
263c6d7 Yonglong Liu 26 January 2019, 09:18:25 UTC net: hns: Fix for missing of_node_put() after of_parse_phandle() In hns enet driver, we use of_parse_handle() to get hold of the device node related to "ae-handle" but we have missed to put the node reference using of_node_put() after we are done using the node. This patch fixes it. Note: This problem is stated in Link: https://lkml.org/lkml/2018/12/22/217 Fixes: 48189d6aaf1e ("net: hns: enet specifies a reference to dsaf") Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> 28 January 2019, 07:01:56 UTC
f17b5f0 Linus Torvalds 27 January 2019, 23:18:05 UTC Linux 5.0-rc4 27 January 2019, 23:18:05 UTC
8a5f060 Linus Torvalds 27 January 2019, 20:02:00 UTC Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes for x86: - Fix the swapped outb() parameters in the KASLR code - Fix the PKEY handling at fork which missed to preserve the pkey state for the child. Comes with a test case to validate that. - Fix the entry stack handling for XEN PV to respect that XEN PV systems enter the function already on the current thread stack and not on the trampoline. - Fix kexec load failure caused by using a stale value when the kexec_buf structure is reused for subsequent allocations. - Fix a bogus sizeof() in the memory encryption code - Enforce PCI dependency for the Intel Low Power Subsystem - Enforce PCI_LOCKLESS_CONFIG when PCI is enabled" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled x86/entry/64/compat: Fix stack switching for XEN PV x86/kexec: Fix a kexec_file_load() failure x86/mm/mem_encrypt: Fix erroneous sizeof() x86/selftests/pkeys: Fork() to check for state being preserved x86/pkeys: Properly copy pkey state at fork() x86/kaslr: Fix incorrect i8254 outb() parameters x86/intel/lpss: Make PCI dependency explicit 27 January 2019, 20:02:00 UTC
351e1aa Linus Torvalds 27 January 2019, 19:57:46 UTC Merge branch 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 timer fixes from Thomas Gleixner: "Two commits which were missed to be sent during the merge window. - The TSC calibration fix turns out to be more urgent as recent Skylake-X systems seem to have massive trouble with calibration disturbance. This should go back into stable for that reason and it the risk of breakage is rather low. - Drop an unused define" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hpet: Remove unused FSEC_PER_NSEC define x86/tsc: Make calibration refinement more robust 27 January 2019, 19:57:46 UTC
f907bb4 Linus Torvalds 27 January 2019, 19:55:06 UTC Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Glexiner: "A single regression fix to address the unintended breakage of posix cpu timers. This is caused by a new sanity check in the common code, which fails for posix cpu timers under certain conditions because the posix cpu timer code never updates the variable which is checked" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Unbreak timer rearming 27 January 2019, 19:55:06 UTC
9881051 Linus Torvalds 27 January 2019, 19:52:50 UTC Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "A small series of fixes which all address possible missed wakeups: - Document and fix the wakeup ordering of wake_q - Add the missing barrier in rcuwait_wake_up(), which was documented in the comment but missing in the code - Fix the possible missed wakeups in the rwsem and futex code" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwsem: Fix (possible) missed wakeup futex: Fix (possible) missed wakeup sched/wake_q: Fix wakeup ordering for wake_q sched/wake_q: Document wake_q_add() sched/wait: Fix rcuwait_wake_up() ordering 27 January 2019, 19:52:50 UTC
0d48437 Linus Torvalds 27 January 2019, 19:25:38 UTC Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A small set of fixes for the interrupt subsystem: - Fix a double increment in the irq descriptor allocator which resulted in a sanity check only being done for every second affinity mask - Add a missing device tree translation in the stm32-exti driver. Without that the interrupt association is completely wrong. - Initialize the mutex in the GIC-V3 MBI driver - Fix the alignment for aliasing devices in the GIC-V3-ITS driver so multi MSI allocations work correctly - Ensure that the initial affinity of a interrupt is not empty at startup time. - Drop bogus include in the madera irq chip driver - Fix KernelDoc regression" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size genirq/irqdesc: Fix double increment in alloc_descs() genirq: Fix the kerneldoc comment for struct irq_affinity_desc irqchip/madera: Drop GPIO includes irqchip/gic-v3-mbi: Fix uninitialized mbi_lock irqchip/stm32-exti: Add domain translate function genirq: Make sure the initial affinity is not empty 27 January 2019, 19:25:38 UTC
3da15ad David S. Miller 27 January 2019, 19:06:45 UTC Merge tag 'mlx5-fixes-2019-01-25' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-01-25 This series introduces some fixes to mlx5 driver. For more information please see tag log below. Please pull and let me know if there is any problem. For -stable v4.13 ('net/mlx5e: Allow MAC invalidation while spoofchk is ON') For -stable v4.18 ('Revert "net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager"') ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2019, 19:06:45 UTC
9835424 Linus Torvalds 27 January 2019, 19:00:37 UTC Merge tag 'edac_fix_for_5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC fix from Borislav Petkov: "Fix persistent register offsets of altera_edac, from Thor Thayer" * tag 'edac_fix_for_5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, altera: Fix S10 persistent register offset 27 January 2019, 19:00:37 UTC
419967d Linus Torvalds 27 January 2019, 18:58:20 UTC Merge tag 'for-linus-20190127' of git://git.kernel.dk/linux-block Pull block revert from Jens Axboe: "Silly error snuck into a patch from the last series, let's do a revert to avoid a potential use-after-free" * tag 'for-linus-20190127' of git://git.kernel.dk/linux-block: Revert "block: cover another queue enter recursion via BIO_QUEUE_ENTERED" 27 January 2019, 18:58:20 UTC
b0cf029 Bernard Pidoux 25 January 2019, 10:46:40 UTC net/rose: fix NULL ax25_cb kernel panic When an internally generated frame is handled by rose_xmit(), rose_route_frame() is called: if (!rose_route_frame(skb, NULL)) { dev_kfree_skb(skb); stats->tx_errors++; return NETDEV_TX_OK; } We have the same code sequence in Net/Rom where an internally generated frame is handled by nr_xmit() calling nr_route_frame(skb, NULL). However, in this function NULL argument is tested while it is not in rose_route_frame(). Then kernel panic occurs later on when calling ax25cmp() with a NULL ax25_cb argument as reported many times and recently with syzbot. We need to test if ax25 is NULL before using it. Testing: Built kernel with CONFIG_ROSE=y. Signed-off-by: Bernard Pidoux <f6bvp@free.fr> Acked-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: syzbot+1a2c456a1ea08fa5b5f7@syzkaller.appspotmail.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Bernard Pidoux <f6bvp@free.fr> Cc: linux-hams@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2019, 18:40:01 UTC
6571ebc Tomonori Sakita 25 January 2019, 02:02:22 UTC net: altera_tse: fix msgdma_tx_completion on non-zero fill_level case If fill_level was not zero and status was not BUSY, result of "tx_prod - tx_cons - inuse" might be zero. Subtracting 1 unconditionally results invalid negative return value on this case. Make sure not to return an negative value. Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp> Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Reviewed-by: Dalon L Westergreen <dalon.westergreen@linux.intel.com> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2019, 18:39:07 UTC
6334665 Cong Wang 24 January 2019, 22:18:18 UTC netrom: switch to sock timer API sk_reset_timer() and sk_stop_timer() properly handle sock refcnt for timer function. Switching to them could fix a refcounting bug reported by syzbot. Reported-and-tested-by: syzbot+defa700d16f1bd1b9a05@syzkaller.appspotmail.com Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-hams@vger.kernel.org Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2019, 18:38:04 UTC
c303a9b David S. Miller 27 January 2019, 18:30:01 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2019-01-25 1) Several patches to fix the fallout from the recent tree based policy lookup work. From Florian Westphal. 2) Fix VTI for IPCOMP for 'not compressed' IPCOMP packets. We need an extra IPIP handler to process these packets correctly. From Su Yanjun. 3) Fix validation of template and selector families for MODE_ROUTEOPTIMIZATION with ipv4-in-ipv6 packets. This can lead to a stack-out-of-bounds because flowi4 struct is treated as flowi6 struct. Fix from Florian Westphal. 4) Restore the default behaviour of the xfrm set-mark in the output path. This was changed accidentally when mark setting was extended to the input path. From Benedict Wong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 27 January 2019, 18:30:01 UTC
back to top