Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
cc9f67a Alex Deucher 16 June 2011, 14:06:16 UTC drm/radeon/kms/atom: AdjustPixelClock fixes for DP bridges Need to set the external transmitter type properly in AdjustPixelClock to get the properly output. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 June 2011, 23:28:10 UTC
f89931f Alex Deucher 13 June 2011, 21:13:35 UTC drm/radeon/kms: fix handling of DP to LVDS bridges They need to be treated like eDP rather than DP. May fix: https://bugzilla.kernel.org/show_bug.cgi?id=34822 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 June 2011, 23:28:07 UTC
d6c6695 Alex Deucher 13 June 2011, 21:13:36 UTC drm/radeon/kms: issue blank/unblank commands for ext encoders Required for DPMS on some systems. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 June 2011, 23:28:05 UTC
591a10e Alex Deucher 13 June 2011, 21:13:34 UTC drm/radeon/kms: fix support for DDC on dp bridges Need to set up the bridge for DDC prior to the i2c over aux transaction. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 June 2011, 23:28:03 UTC
d629a3c Alex Deucher 13 June 2011, 21:13:33 UTC drm/radeon/kms: add support for load detection on dp bridges dp to vga bridges for example. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 June 2011, 23:28:02 UTC
7ec478f Alex Deucher 13 June 2011, 21:13:32 UTC drm/radeon/kms: add missing external encoder action required for ddc. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 June 2011, 23:28:01 UTC
fbb8777 Alex Deucher 13 June 2011, 21:13:31 UTC drm/radeon/kms: rework atombios_get_encoder_mode() This should give us more reliable results if the table is called before an active device is set. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 June 2011, 23:27:59 UTC
ba7e05e Alex Deucher 16 June 2011, 18:14:22 UTC drm/radeon/kms: fix num crtcs for Cedar and Caicos Only support 4 rather than 6. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 June 2011, 23:24:29 UTC
826c7e4 Jean Delvare 04 June 2011, 19:34:56 UTC Revert "drm/i915: Enable GMBUS for post-gen2 chipsets" Revert commit 8f9a3f9b63b8cd3f03be9dc53533f90bd4120e5f. This fixes a hang when loading the eeprom driver (see bug #35572.) GMBUS will be re-enabled later, differently. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reported-by: Marek Otahal <markotahal@gmail.com> Tested-by: Yermandu Patapitafious <yermandu.dev@gmail.com> Tested-by: Andrew Lutomirski <luto@mit.edu> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 June 2011, 23:22:01 UTC
cafe8d8 Christian Dietrich 04 June 2011, 15:36:43 UTC drivers/gpu/drm: use printk_ratelimited instead of printk_ratelimit Since printk_ratelimit() shouldn't be used anymore (see comment in include/linux/printk.h), replace it with printk_ratelimited. Signed-off-by: Christian Dietrich <christian.dietrich@informatik.uni-erlangen.de> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 June 2011, 06:32:15 UTC
4a9a8b7 Dave Airlie 14 June 2011, 06:13:55 UTC drm/radeon: workaround a hw bug on some radeon chipsets with all-0 EDIDs. Some RS690 chipsets seem to end up with floating connectors, either a DVI connector isn't actually populated, or an add-in HDMI card is available but not installed. In this case we seem to get a NULL byte response for each byte of the i2c transaction, so we detect this case and if we see it we don't do anymore DDC transactions on this connector. I've tested this on my RS690 without the HDMI card installed and it seems to work fine. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> 16 June 2011, 06:30:54 UTC
f49dadb Dave Airlie 14 June 2011, 06:13:54 UTC drm: make debug levels match in edid failure code. this puts the header and followup at the same loglevel as the hex dump code. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> 16 June 2011, 06:29:37 UTC
e6ba759 Alex Deucher 13 June 2011, 22:02:51 UTC drm/radeon/kms: clear wb memory by default Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 June 2011, 06:28:43 UTC
7c88d2b Alex Deucher 14 June 2011, 15:27:38 UTC drm/radeon/kms: be more pedantic about the g5 quirk (v2) I don't think Apple offered any other cards for this mac, so I doubt this will be an issue, but just to be on the safe side, check the pci ids as well. v2: fix spelling in commit message Reviewed-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Joachim Henke <j-o@users.sourceforge.net> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 June 2011, 06:27:28 UTC
1c88d74 Alex Deucher 14 June 2011, 19:15:53 UTC drm/radeon/kms: signed fix for evergreen thermal temperature is signed. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 16 June 2011, 06:27:20 UTC
45e97ab Wolfram Sang 15 June 2011, 09:26:47 UTC drm: populate irq_by_busid-member for pci Commit 8410ea (drm: rework PCI/platform driver interface) implemented drm_pci_irq_by_busid() but forgot to make it available in the drm_pci_bus-struct. This caused a freeze on my Radeon9600-equipped laptop when executing glxgears. Thanks to Michel for noticing the flaw. [airlied: made function static also] Reported-by: Michel Dänzer <daenzer@vmware.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> 16 June 2011, 06:26:45 UTC
21c5977 Dan Rosenberg 15 June 2011, 22:09:01 UTC alpha: fix several security issues Fix several security issues in Alpha-specific syscalls. Untested, but mostly trivial. 1. Signedness issue in osf_getdomainname allows copying out-of-bounds kernel memory to userland. 2. Signedness issue in osf_sysinfo allows copying large amounts of kernel memory to userland. 3. Typo (?) in osf_getsysinfo bounds minimum instead of maximum copy size, allowing copying large amounts of kernel memory to userland. 4. Usage of user pointer in osf_wait4 while under KERNEL_DS allows privilege escalation via writing return value of sys_wait4 to kernel memory. Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:02 UTC
ec8f9ce Geert Uytterhoeven 15 June 2011, 22:08:59 UTC drivers/misc/apds990x.c: apds990x_chip_on() should depend on CONFIG_PM || CONFIG_PM_RUNTIME Fixes this warning: drivers/misc/apds990x.c: At top level: drivers/misc/apds990x.c:613: warning: `apds990x_chip_on' defined but not used Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:02 UTC
2b47261 Hugh Dickins 15 June 2011, 22:08:58 UTC ksm: fix NULL pointer dereference in scan_get_next_rmap_item() Andrea Righi reported a case where an exiting task can race against ksmd::scan_get_next_rmap_item (http://lkml.org/lkml/2011/6/1/742) easily triggering a NULL pointer dereference in ksmd. ksm_scan.mm_slot == &ksm_mm_head with only one registered mm CPU 1 (__ksm_exit) CPU 2 (scan_get_next_rmap_item) list_empty() is false lock slot == &ksm_mm_head list_del(slot->mm_list) (list now empty) unlock lock slot = list_entry(slot->mm_list.next) (list is empty, so slot is still ksm_mm_head) unlock slot->mm == NULL ... Oops Close this race by revalidating that the new slot is not simply the list head again. Andrea's test case: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> #define BUFSIZE getpagesize() int main(int argc, char **argv) { void *ptr; if (posix_memalign(&ptr, getpagesize(), BUFSIZE) < 0) { perror("posix_memalign"); exit(1); } if (madvise(ptr, BUFSIZE, MADV_MERGEABLE) < 0) { perror("madvise"); exit(1); } *(char *)NULL = 0; return 0; } Reported-by: Andrea Righi <andrea@betterlinux.com> Tested-by: Andrea Righi <andrea@betterlinux.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:02 UTC
c7cbb02 Wanlong Gao 15 June 2011, 22:08:56 UTC rtc: fix build warnings in defconfigs RTC_CLASS is changed to bool, so 'm' is invalid. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:02 UTC
fb139df Alexander Stein 15 June 2011, 22:08:55 UTC drivers/tty/serial/pch_uart.c: don't oops if dmi_get_system_info returns NULL If dmi_get_system_info() returns NULL, pch_uart_init_port() will dereferencea a zero pointer. This oops was observed on an Atom based board which has no BIOS, but a bootloder which doesn't provide DMI data. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Cc: Greg KH <gregkh@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:02 UTC
273ef95 Nils Carlson 15 June 2011, 22:08:54 UTC drivers/char/hpet.c: fix periodic-emulation for delayed interrupts When interrupts are delayed due to interrupt masking or due to other interrupts being serviced the HPET periodic-emuation would fail. This happened because given an interval t and a time for the current interrupt m we would compute the next time as t + m. This works until we are delayed for > t, in which case we would be writing a new value which is in fact in the past. This can be solved by computing the next time instead as (k * t) + m where k is large enough to be in the future. The exact computation of k is described in a comment to the code. More detail: Assuming an interval of 5 between each expected interrupt we have a normal case of t0: interrupt, read t0 from comparator, set next interrupt t0 + 5 t5: interrupt, read t5 from comparator, set next interrupt t5 + 5 t10: interrupt, read t10 from comparator, set next interrupt t10 + 5 ... So, what happens when the interrupt is serviced too late? t0: interrupt, read t0 from comparator, set next interrupt t0 + 5 t11: delayed interrupt serviced, read t5 from comparator, set next interrupt t5 + 5, which is in the past! ... counter loops ... t10: Much much later, get the next interrupt. This can happen either because we have interrupts masked for too long (some stupid driver goes on a printk rampage) or just because we are pushing the limits of the interval (too small a period), or both most probably. My solution is to read the main counter as well and set the next interrupt to occur at the right interval, for example: t0: interrupt, read t0 from comparator, set next interrupt t0 + 5 t11: delayed interrupt serviced, read t5 from comparator, set next interrupt t15 as t10 has been missed. t15: back on track. Signed-off-by: Nils Carlson <nils.carlson@ericsson.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:02 UTC
31b5f8e akpm@linux-foundation.org 15 June 2011, 22:08:52 UTC Documentation/feature-removal-schedule.txt: remove ns_cgroup from feature-removal-schedule.txt Commit a77aea92010acf ("cgroup: remove the ns_cgroup") removed the ns_cgroup but it forgot to remove the related doc in feature-removal-schedule.txt. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@free.fr> Cc: Serge E. Hallyn <serge.hallyn@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:02 UTC
f9e35b3 Mel Gorman 15 June 2011, 22:08:52 UTC mm: compaction: abort compaction if too many pages are isolated and caller is asynchronous V2 Asynchronous compaction is used when promoting to huge pages. This is all very nice but if there are a number of processes in compacting memory, a large number of pages can be isolated. An "asynchronous" process can stall for long periods of time as a result with a user reporting that firefox can stall for 10s of seconds. This patch aborts asynchronous compaction if too many pages are isolated as it's better to fail a hugepage promotion than stall a process. [minchan.kim@gmail.com: return COMPACT_PARTIAL for abort] Reported-and-tested-by: Ury Stankevich <urykhy@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:02 UTC
d179e84 Andrea Arcangeli 15 June 2011, 22:08:51 UTC mm: vmscan: do not use page_count without a page pin It is unsafe to run page_count during the physical pfn scan because compound_head could trip on a dangling pointer when reading page->first_page if the compound page is being freed by another CPU. [mgorman@suse.de: split out patch] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:02 UTC
7454f4b Mel Gorman 15 June 2011, 22:08:50 UTC mm: compaction: ensure that the compaction free scanner does not move to the next zone Compaction works with two scanners, a migration and a free scanner. When the scanners crossover, migration within the zone is complete. The location of the scanner is recorded on each cycle to avoid excesive scanning. When a zone is small and mostly reserved, it's very easy for the migration scanner to be close to the end of the zone. Then the following situation can occurs o migration scanner isolates some pages near the end of the zone o free scanner starts at the end of the zone but finds that the migration scanner is already there o free scanner gets reinitialised for the next cycle as cc->migrate_pfn + pageblock_nr_pages moving the free scanner into the next zone o migration scanner moves into the next zone When this happens, NR_ISOLATED accounting goes haywire because some of the accounting happens against the wrong zone. One zones counter remains positive while the other goes negative even though the overall global count is accurate. This was reported on X86-32 with !SMP because !SMP allows the negative counters to be visible. The fact that it is the bug should theoritically be possible there. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:02 UTC
a582a73 Shaohua Li 15 June 2011, 22:08:49 UTC compaction: checks correct fragmentation index fragmentation_index() returns -1000 when the allocation might succeed This doesn't match the comment and code in compaction_suitable(). I thought compaction_suitable should return COMPACT_PARTIAL in -1000 case, because in this case allocation could succeed depending on watermarks. The impact of this is that compaction starts and compact_finished() is called which rechecks the watermarks and the free lists. It should have the same result in that compaction should not start but is more expensive. Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:02 UTC
5db8a73 Minchan Kim 15 June 2011, 22:08:48 UTC mm/memory-failure.c: fix page isolated count mismatch Pages isolated for migration are accounted with the vmstat counters NR_ISOLATE_[ANON|FILE]. Callers of migrate_pages() are expected to increment these counters when pages are isolated from the LRU. Once the pages have been migrated, they are put back on the LRU or freed and the isolated count is decremented. Memory failure is not properly accounting for pages it isolates causing the NR_ISOLATED counters to be negative. On SMP builds, this goes unnoticed as negative counters are treated as 0 due to expected per-cpu drift. On UP builds, the counter is treated by too_many_isolated() as a large value causing processes to enter D state during page reclaim or compaction. This patch accounts for pages isolated by memory failure correctly. [mel@csn.ul.ie: rewrote changelog] Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:01 UTC
d2c3225 Josh Triplett 15 June 2011, 22:08:47 UTC gcov: disable CONFIG_CONSTRUCTORS when not needed by CONFIG_GCOV_KERNEL CONFIG_CONSTRUCTORS controls support for running constructor functions at kernel init time. According to commit b99b87f70c7785ab ("kernel: constructor support"), gcov (CONFIG_GCOV_KERNEL) needs this. However, CONFIG_CONSTRUCTORS currently defaults to y, with no option to disable it, and CONFIG_GCOV_KERNEL depends on it. Instead, default it to n and have CONFIG_GCOV_KERNEL select it, so that the normal case of CONFIG_GCOV_KERNEL=n will result in CONFIG_CONSTRUCTORS=n. Observed in the short list of =y values in a minimal kernel configuration. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:01 UTC
b0461a4 Jean Delvare 15 June 2011, 22:08:46 UTC MAINTAINERS: add entry for legacy eeprom driver I shall maintain the legacy eeprom driver, until we finally get rid of it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:01 UTC
fbc29a2 KAMEZAWA Hiroyuki 15 June 2011, 22:08:46 UTC memcg: avoid percpu cached charge draining at softlimit Based on Michal Hocko's comment. We are not draining per cpu cached charges during soft limit reclaim because background reclaim doesn't care about charges. It tries to free some memory and charges will not give any. Cached charges might influence only selection of the biggest soft limit offender but as the call is done only after the selection has been already done it makes no change. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reviewed-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:01 UTC
26fe616 KAMEZAWA Hiroyuki 15 June 2011, 22:08:45 UTC memcg: fix percpu cached charge draining frequency For performance, memory cgroup caches some "charge" from res_counter into per cpu cache. This works well but because it's cache, it needs to be flushed in some cases. Typical cases are 1. when someone hit limit. 2. when rmdir() is called and need to charges to be 0. But "1" has problem. Recently, with large SMP machines, we see many kworker runs because of flushing memcg's cache. Bad things in implementation are that even if a cpu contains a cache for memcg not related to a memcg which hits limit, drain code is called. This patch does A) check percpu cache contains a useful data or not. B) check other asynchronous percpu draining doesn't run. C) don't call local cpu callback. (*)This patch avoid changing the calling condition with hard-limit. When I run "cat 1Gfile > /dev/null" under 300M limit memcg, [Before] 13767 kamezawa 20 0 98.6m 424 416 D 10.0 0.0 0:00.61 cat 58 root 20 0 0 0 0 S 0.6 0.0 0:00.09 kworker/2:1 60 root 20 0 0 0 0 S 0.6 0.0 0:00.08 kworker/4:1 4 root 20 0 0 0 0 S 0.3 0.0 0:00.02 kworker/0:0 57 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/1:1 61 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/5:1 62 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/6:1 63 root 20 0 0 0 0 S 0.3 0.0 0:00.05 kworker/7:1 [After] 2676 root 20 0 98.6m 416 416 D 9.3 0.0 0:00.87 cat 2626 kamezawa 20 0 15192 1312 920 R 0.3 0.0 0:00.28 top 1 root 20 0 19384 1496 1204 S 0.0 0.0 0:00.66 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0 4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0 [akpm@linux-foundation.org: make percpu_charge_mutex static, tweak comments] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reviewed-by: Michal Hocko <mhocko@suse.cz> Tested-by: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:01 UTC
7ae534d KAMEZAWA Hiroyuki 15 June 2011, 22:08:44 UTC memcg: fix wrong check of noswap with softlimit Hierarchical reclaim doesn't swap out if memsw and resource limits are thye same (memsw_is_minimum == true) because we would hit mem+swap limit anyway (during hard limit reclaim). If it comes to the soft limit we shouldn't consider memsw_is_minimum at all because it doesn't make much sense. Either the soft limit is bellow the hard limit and then we cannot hit mem+swap limit or the direct reclaim takes a precedence. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:01 UTC
733eda7 KAMEZAWA Hiroyuki 15 June 2011, 22:08:43 UTC memcg: clear mm->owner when last possible owner leaves The following crash was reported: > Call Trace: > [<ffffffff81139792>] mem_cgroup_from_task+0x15/0x17 > [<ffffffff8113a75a>] __mem_cgroup_try_charge+0x148/0x4b4 > [<ffffffff810493f3>] ? need_resched+0x23/0x2d > [<ffffffff814cbf43>] ? preempt_schedule+0x46/0x4f > [<ffffffff8113afe8>] mem_cgroup_charge_common+0x9a/0xce > [<ffffffff8113b6d1>] mem_cgroup_newpage_charge+0x5d/0x5f > [<ffffffff81134024>] khugepaged+0x5da/0xfaf > [<ffffffff81078ea0>] ? __init_waitqueue_head+0x4b/0x4b > [<ffffffff81133a4a>] ? add_mm_counter.constprop.5+0x13/0x13 > [<ffffffff81078625>] kthread+0xa8/0xb0 > [<ffffffff814d13e8>] ? sub_preempt_count+0xa1/0xb4 > [<ffffffff814d5664>] kernel_thread_helper+0x4/0x10 > [<ffffffff814ce858>] ? retint_restore_args+0x13/0x13 > [<ffffffff8107857d>] ? __init_kthread_worker+0x5a/0x5a What happens is that khugepaged tries to charge a huge page against an mm whose last possible owner has already exited, and the memory controller crashes when the stale mm->owner is used to look up the cgroup to charge. mm->owner has never been set to NULL with the last owner going away, but nobody cared until khugepaged came along. Even then it wasn't a problem because the final mmput() on an mm was forced to acquire and release mmap_sem in write-mode, preventing an exiting owner to go away while the mmap_sem was held, and until "692e0b3 mm: thp: optimize memcg charge in khugepaged", the memory cgroup charge was protected by mmap_sem in read-mode. Instead of going back to relying on the mmap_sem to enforce lifetime of a task, this patch ensures that mm->owner is properly set to NULL when the last possible owner is exiting, which the memory controller can handle just fine. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Hugh Dickins <hughd@google.com> Reported-by: Dave Jones <davej@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:01 UTC
37573e8 KAMEZAWA Hiroyuki 15 June 2011, 22:08:42 UTC memcg: fix init_page_cgroup nid with sparsemem Commit 21a3c9646873 ("memcg: allocate memory cgroup structures in local nodes") makes page_cgroup allocation as NUMA aware. But that caused a problem https://bugzilla.kernel.org/show_bug.cgi?id=36192. The problem was getting a NID from invalid struct pages, which was not initialized because it was out-of-node, out of [node_start_pfn, node_end_pfn) Now, with sparsemem, page_cgroup_init scans pfn from 0 to max_pfn. But this may scan a pfn which is not on any node and can access memmap which is not initialized. This makes page_cgroup_init() for SPARSEMEM node aware and remove a code to get nid from page->flags. (Then, we'll use valid NID always.) [akpm@linux-foundation.org: try to fix up comments] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:01 UTC
8957712 KAMEZAWA Hiroyuki 15 June 2011, 22:08:41 UTC mm: memory.numa_stat: fix file permission Commit 406eb0c9ba76 ("memcg: add memory.numastat api for numa statistics") adds memory.numa_stat file for memory cgroup. But the file permissions are wrong. [kamezawa@bluextal linux-2.6]$ ls -l /cgroup/memory/A/memory.numa_stat ---------- 1 root root 0 Jun 9 18:36 /cgroup/memory/A/memory.numa_stat This patch fixes the permission as [root@bluextal kamezawa]# ls -l /cgroup/memory/A/memory.numa_stat -r--r--r-- 1 root root 0 Jun 10 16:49 /cgroup/memory/A/memory.numa_stat Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:01 UTC
45d16f0 Eric Miao 15 June 2011, 22:08:40 UTC leds: fix the incorrect display in menuconfig Seems when a config option does not have a dependency of the menuconfig, it messes the display of the rest configs, even if it's a hidden one. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:01 UTC
b0320c7 Rafael Aquini 15 June 2011, 22:08:39 UTC mm: fix negative commitlimit when gigantic hugepages are allocated When 1GB hugepages are allocated on a system, free(1) reports less available memory than what really is installed in the box. Also, if the total size of hugepages allocated on a system is over half of the total memory size, CommitLimit becomes a negative number. The problem is that gigantic hugepages (order > MAX_ORDER) can only be allocated at boot with bootmem, thus its frames are not accounted to 'totalram_pages'. However, they are accounted to hugetlb_total_pages() What happens to turn CommitLimit into a negative number is this calculation, in fs/proc/meminfo.c: allowed = ((totalram_pages - hugetlb_total_pages()) * sysctl_overcommit_ratio / 100) + total_swap_pages; A similar calculation occurs in __vm_enough_memory() in mm/mmap.c. Also, every vm statistic which depends on 'totalram_pages' will render confusing values, as if system were 'missing' some part of its memory. Impact of this bug: When gigantic hugepages are allocated and sysctl_overcommit_memory == OVERCOMMIT_NEVER. In a such situation, __vm_enough_memory() goes through the mentioned 'allowed' calculation and might end up mistakenly returning -ENOMEM, thus forcing the system to start reclaiming pages earlier than it would be ususal, and this could cause detrimental impact to overall system's performance, depending on the workload. Besides the aforementioned scenario, I can only think of this causing annoyances with memory reports from /proc/meminfo and free(1). [akpm@linux-foundation.org: standardize comment layout] Reported-by: Russ Anderson <rja@sgi.com> Signed-off-by: Rafael Aquini <aquini@linux.com> Acked-by: Russ Anderson <rja@sgi.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:01 UTC
959ecc4 KAMEZAWA Hiroyuki 15 June 2011, 22:08:38 UTC mm/memory_hotplug.c: fix building of node hotplug zonelist During memory hotplug we refresh zonelists when we online a page in a new zone. It means that the node's zonelist is not initialized until pages are onlined. So for example, "nid" passed by MEM_GOING_ONLINE notifier will point to NODE_DATA(nid) which has no zone fallback list. Moreover, if we hot-add cpu-only nodes, alloc_pages() will do no fallback. This patch makes a zonelist when a new pgdata is available. Note: in production, at fujitsu, memory should be onlined before cpu and our server didn't have any memory-less nodes and had no problems. But recent changes in MEM_GOING_ONLINE+page_cgroup will access not initialized zonelist of node. Anyway, there are memory-less node and we need some care. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:01 UTC
de695e1 Borislav Petkov 15 June 2011, 22:08:37 UTC init/calibrate.c: remove annoying printk Remove calibrate_delay_direct()'s KERN_DEBUG printk related to bogomips calculation as it appears when booting every core on setups with 'ignore_loglevel' which dmesg people scan for possible issues. As the message doesn't show very useful information to the widest audience of kernel boot message gazers, it should be removed. Introduced by commit d2b463135f84 ("init/calibrate.c: fix for critical bogoMIPS intermittent calculation failure"). Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:01 UTC
26575f9 Geert Uytterhoeven 15 June 2011, 22:08:35 UTC w1: W1_MASTER_DS1WM should depend on GENERIC_HARDIRQS On m68k (which doesn't support generic hardirqs yet): drivers/w1/masters/ds1wm.c: In function `ds1wm_probe': drivers/w1/masters/ds1wm.c: error: implicit declaration of function `irq_set_irq_type' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Jean-Franois Dagenais <dagenaisj@sonatest.com> Cc: Matt Reimer <mreimer@vpop.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:00 UTC
49b24d6 Nicolas Kaiser 15 June 2011, 22:08:34 UTC include/asm-generic/pgtable.h: fix unbalanced parenthesis Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:00 UTC
9e6f343 Pawel Osciak 15 June 2011, 22:08:32 UTC MAINTAINERS: add videobuf2 maintainers Add maintainers for the videobuf2 V4L2 driver framework. Signed-off-by: Pawel Osciak <pawel@osciak.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:00 UTC
be5ce2f Uwe Kleine-König 15 June 2011, 22:08:31 UTC leds: move LEDS_GPIO_REGISTER out of menuconfig NEW_LEDS Commit 4440673a95e6 ("leds: provide helper to register "leds-gpio" devices") broke the display of the NEW_LEDS menu as it didn't depend on NEW_LEDS and so made "LED drivers" and "LED Triggers" appear at the same level as "LED Support" instead of below it as it was before 4440673a. Moving LEDS_GPIO_REGISTER out of the menuconfig NEW_LEDS fixes this unintended side effect. Reported-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:00 UTC
9d8f776 Axel Lin 15 June 2011, 22:08:31 UTC drivers/leds/leds-asic3: make LEDS_ASIC3 depend on LEDS_CLASS We call led_classdev_unregister/led_classdev_register in asic3_led_remove/asic3_led_probe, thus make LEDS_ASIC3 depend on LEDS_CLASS. This patch fixes below build error if LEDS_CLASS is not configured. LD .tmp_vmlinux1 drivers/built-in.o: In function `asic3_led_remove': clkdev.c:(.devexit.text+0x1860): undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `asic3_led_probe': clkdev.c:(.devinit.text+0xcee8): undefined reference to `led_classdev_register' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Paul Parsons <lost.distance@yahoo.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:00 UTC
185e595 Balbir Singh 15 June 2011, 22:08:30 UTC MAINTAINERS: Balbir has moved Update my email address. Email will start to the old address bouncing soon Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:00 UTC
bd5dc17 Josh Triplett 15 June 2011, 22:08:28 UTC uts: make default hostname configurable, rather than always using "(none)" The "hostname" tool falls back to setting the hostname to "localhost" if /etc/hostname does not exist. Distribution init scripts have the same fallback. However, if userspace never calls sethostname, such as when booting with init=/bin/sh, or otherwise booting a minimal system without the usual init scripts, the default hostname of "(none)" remains, unhelpfully appearing in various places such as prompts ("root@(none):~#") and logs. Furthermore, "(none)" doesn't typically resolve to anything useful. Make the default hostname configurable. This removes the need for the standard fallback, provides a useful default for systems that never call sethostname, and makes minimal systems that much more useful with less configuration. Distributions could choose to use "localhost" here to avoid the fallback, while embedded systems may wish to use a specific target hostname. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: David Miller <davem@davemloft.net> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Kel Modderman <kel@otaku42.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:00 UTC
ca39599 Dr. David Alan Gilbert 15 June 2011, 22:08:27 UTC BUILD_BUG_ON_ZERO: fix sparse breakage BUILD_BUG_ON_ZERO and BUILD_BUG_ON_NULL must return values, even in the CHECKER case otherwise various users of it become syntactically invalid. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:00 UTC
3957c77 Michal Hocko 15 June 2011, 22:08:25 UTC mm: compaction: fix special case -1 order checks Commit 56de7263fcf3 ("mm: compaction: direct compact when a high-order allocation fails") introduced a check for cc->order == -1 in compact_finished. We should continue compacting in that case because the request came from userspace and there is no particular order to compact for. Similar check has been added by 82478fb7 (mm: compaction: prevent division-by-zero during user-requested compaction) for compaction_suitable. The check is, however, done after zone_watermark_ok which uses order as a right hand argument for shifts. Not only watermark check is pointless if we can break out without it but it also uses 1 << -1 which is not well defined (at least from C standard). Let's move the -1 check above zone_watermark_ok. [minchan.kim@gmail.com> - caught compaction_suitable] Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hioryu@jp.fujitsu.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:00 UTC
5f1a190 Steven Rostedt 15 June 2011, 22:08:23 UTC mm: fix wrong kunmap_atomic() pointer Running a ktest.pl test, I hit the following bug on x86_32: ------------[ cut here ]------------ WARNING: at arch/x86/mm/highmem_32.c:81 __kunmap_atomic+0x64/0xc1() Hardware name: Modules linked in: Pid: 93, comm: sh Not tainted 2.6.39-test+ #1 Call Trace: [<c04450da>] warn_slowpath_common+0x7c/0x91 [<c042f5df>] ? __kunmap_atomic+0x64/0xc1 [<c042f5df>] ? __kunmap_atomic+0x64/0xc1^M [<c0445111>] warn_slowpath_null+0x22/0x24 [<c042f5df>] __kunmap_atomic+0x64/0xc1 [<c04d4a22>] unmap_vmas+0x43a/0x4e0 [<c04d9065>] exit_mmap+0x91/0xd2 [<c0443057>] mmput+0x43/0xad [<c0448358>] exit_mm+0x111/0x119 [<c044855f>] do_exit+0x1ff/0x5fa [<c0454ea2>] ? set_current_blocked+0x3c/0x40 [<c0454f24>] ? sigprocmask+0x7e/0x8e [<c0448b55>] do_group_exit+0x65/0x88 [<c0448b90>] sys_exit_group+0x18/0x1c [<c0c3915f>] sysenter_do_call+0x12/0x38 ---[ end trace 8055f74ea3c0eb62 ]--- Running a ktest.pl git bisect, found the culprit: commit e303297e6c3a ("mm: extended batches for generic mmu_gather") But although this was the commit triggering the bug, it was not the one originally responsible for the bug. That was commit d16dfc550f53 ("mm: mmu_gather rework"). The code in zap_pte_range() has something that looks like the following: pte = pte_offset_map_lock(mm, pmd, addr, &ptl); do { [...] } while (pte++, addr += PAGE_SIZE, addr != end); pte_unmap_unlock(pte - 1, ptl); The pte starts off pointing at the first element in the page table directory that was returned by the pte_offset_map_lock(). When it's done with the page, pte will be pointing to anything between the next entry and the first entry of the next page inclusive. By doing a pte - 1, this puts the pte back onto the original page, which is all that pte_unmap_unlock() needs. In most archs (64 bit), this is not an issue as the pte is ignored in the pte_unmap_unlock(). But on 32 bit archs, where things may be kmapped, it is essential that the pte passed to pte_unmap_unlock() resides on the same page that was given by pte_offest_map_lock(). The problem came in d16dfc55 ("mm: mmu_gather rework") where it introduced a "break;" from the while loop. This alone did not seem to easily trigger the bug. But the modifications made by e303297e6 caused that "break;" to be hit on the first iteration, before the pte++. The pte not being incremented will now cause pte_unmap_unlock(pte - 1) to be pointing to the previous page. This will cause the wrong page to be unmapped, and also trigger the warning above. The simple solution is to just save the pointer given by pte_offset_map_lock() and use it in the unlock. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:00 UTC
4bbd61f Christian Gmeiner 15 June 2011, 22:08:22 UTC drivers/misc/cs5535-mfgpt.c: fix wrong if condition Fix the wrong `if' condition for the check if the requested timer is available. The bitmap avail is used to store if a timer is used already. test_bit() is used to check if the requested timer is available. If a bit in the avail bitmap is set it means that the timer is available. The runtime effect would be that allocating a specific timer always fails (versus telling cs5535_mfgpt_alloc_timer to allocate the first available timer, which works). Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:00 UTC
5a1e6f7 Axel Lin 15 June 2011, 22:08:21 UTC drivers/misc/spear13xx_pcie_gadget.c: fix a memory leak in spear_pcie_gadget_probe error path In the case of goto err_kzalloc, we should kfree target. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:04:00 UTC
32e45ff KOSAKI Motohiro 15 June 2011, 22:08:20 UTC mm: increase RECLAIM_DISTANCE to 30 Recently, Robert Mueller reported (http://lkml.org/lkml/2010/9/12/236) that zone_reclaim_mode doesn't work properly on his new NUMA server (Dual Xeon E5520 + Intel S5520UR MB). He is using Cyrus IMAPd and it's built on a very traditional single-process model. * a master process which reads config files and manages the other process * multiple imapd processes, one per connection * multiple pop3d processes, one per connection * multiple lmtpd processes, one per connection * periodical "cleanup" processes. There are thousands of independent processes. The problem is, recent Intel motherboard turn on zone_reclaim_mode by default and traditional prefork model software don't work well on it. Unfortunatelly, such models are still typical even in the 21st century. We can't ignore them. This patch raises the zone_reclaim_mode threshold to 30. 30 doesn't have any specific meaning. but 20 means that one-hop QPI/Hypertransport and such relatively cheap 2-4 socket machine are often used for traditional servers as above. The intention is that these machines don't use zone_reclaim_mode. Note: ia64 and Power have arch specific RECLAIM_DISTANCE definitions. This patch doesn't change such high-end NUMA machine behavior. Dave Hansen said: : I know specifically of pieces of x86 hardware that set the information : in the BIOS to '21' *specifically* so they'll get the zone_reclaim_mode : behavior which that implies. : : They've done performance testing and run very large and scary benchmarks : to make sure that they _want_ this turned on. What this means for them : is that they'll probably be de-optimized, at least on newer versions of : the kernel. : : If you want to do this for particular systems, maybe _that_'s what we : should do. Have a list of specific configurations that need the : defaults overridden either because they're buggy, or they have an : unusual hardware configuration not really reflected in the distance : table. And later said: : The original change in the hardware tables was for the benefit of a : benchmark. Said benchmark isn't going to get run on mainline until the : next batch of enterprise distros drops, at which point the hardware where : this was done will be irrelevant for the benchmark. I'm sure any new : hardware will just set this distance to another yet arbitrary value to : make the kernel do what it wants. :) : : Also, when the hardware got _set_ to this initially, I complained. So, I : guess I'm getting my way now, with this patch. I'm cool with it. Reported-by: Robert Mueller <robm@fastmail.fm> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Luck, Tony" <tony.luck@intel.com> Acked-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:03:59 UTC
1744122 Joe Perches 15 June 2011, 22:08:17 UTC checkpatch: add warning for uses of printk_ratelimit Warn about uses of printk_ratelimit() because it uses a global state and can hide subsequent useful messages. Signed-off-by: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:03:59 UTC
ac56224 Randy Dunlap 15 June 2011, 22:08:17 UTC kmsg_dump.h: fix build when CONFIG_PRINTK is disabled Fix <linux/kmsg_dump.h> when CONFIG_PRINTK is not enabled: include/linux/kmsg_dump.h:56: error: 'EINVAL' undeclared (first use in this function) include/linux/kmsg_dump.h:61: error: 'EINVAL' undeclared (first use in this function) Looks like commit 595dd3d8bf95 ("kmsg_dump: fix build for CONFIG_PRINTK=n") uses EINVAL without having the needed header file(s), but I'm sure that I build tested that patch also. oh well. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:03:59 UTC
50c35e5 Ying Han 15 June 2011, 22:08:16 UTC memcg: add documentation for the memory.numastat API [akpm@linux-foundation.org: rework text, fit it into 80-cols] Signed-off-by: Ying Han <yinghan@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:03:59 UTC
d7911ef KOSAKI Motohiro 15 June 2011, 22:08:15 UTC vmscan: implement swap token priority aging While testing for memcg aware swap token, I observed a swap token was often grabbed an intermittent running process (eg init, auditd) and they never release a token. Why? Some processes (eg init, auditd, audispd) wake up when a process exiting. And swap token can be get first page-in process when a process exiting makes no swap token owner. Thus such above intermittent running process often get a token. And currently, swap token priority is only decreased at page fault path. Then, if the process sleep immediately after to grab swap token, the swap token priority never be decreased. That's obviously undesirable. This patch implement very poor (and lightweight) priority aging. It only be affect to the above corner case and doesn't change swap tendency workload performance (eg multi process qsbench load) Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:03:59 UTC
83cd81a KOSAKI Motohiro 15 June 2011, 22:08:14 UTC vmscan: implement swap token trace This is useful for observing swap token activity. example output: zsh-1845 [000] 598.962716: update_swap_token_priority: mm=ffff88015eaf7700 old_prio=1 new_prio=0 memtoy-1830 [001] 602.033900: update_swap_token_priority: mm=ffff880037a45880 old_prio=947 new_prio=949 memtoy-1830 [000] 602.041509: update_swap_token_priority: mm=ffff880037a45880 old_prio=949 new_prio=951 memtoy-1830 [000] 602.051959: update_swap_token_priority: mm=ffff880037a45880 old_prio=951 new_prio=953 memtoy-1830 [000] 602.052188: update_swap_token_priority: mm=ffff880037a45880 old_prio=953 new_prio=955 memtoy-1830 [001] 602.427184: put_swap_token: token_mm=ffff880037a45880 zsh-1789 [000] 602.427281: replace_swap_token: old_token_mm= (null) old_prio=0 new_token_mm=ffff88015eaf7018 new_prio=2 zsh-1789 [001] 602.433456: update_swap_token_priority: mm=ffff88015eaf7018 old_prio=2 new_prio=4 zsh-1789 [000] 602.437613: update_swap_token_priority: mm=ffff88015eaf7018 old_prio=4 new_prio=6 zsh-1789 [000] 602.443924: update_swap_token_priority: mm=ffff88015eaf7018 old_prio=6 new_prio=8 zsh-1789 [000] 602.451873: update_swap_token_priority: mm=ffff88015eaf7018 old_prio=8 new_prio=10 zsh-1789 [001] 602.462639: update_swap_token_priority: mm=ffff88015eaf7018 old_prio=10 new_prio=12 Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rik van Riel<riel@redhat.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:03:59 UTC
a433658 KOSAKI Motohiro 15 June 2011, 22:08:13 UTC vmscan,memcg: memcg aware swap token Currently, memcg reclaim can disable swap token even if the swap token mm doesn't belong in its memory cgroup. It's slightly risky. If an admin creates very small mem-cgroup and silly guy runs contentious heavy memory pressure workload, every tasks are going to lose swap token and then system may become unresponsive. That's bad. This patch adds 'memcg' parameter into disable_swap_token(). and if the parameter doesn't match swap token, VM doesn't disable it. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Rik van Riel<riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:03:59 UTC
e1bbd19 Andrew Morton 15 June 2011, 22:08:12 UTC drivers/video/backlight/adp8870_bl.c: add missed props.type conversion Cc: Michael Hennerich <michael.hennerich@analog.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:03:59 UTC
a59ec1e Michael Hennerich 15 June 2011, 22:08:11 UTC backlight: new driver for the ADP8870 backlight devices Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:03:59 UTC
7f81c88 Michal Hocko 15 June 2011, 22:08:11 UTC fs/exec.c: use BUILD_BUG_ON for VM_STACK_FLAGS & VM_STACK_INCOMPLETE_SETUP Commit a8bef8ff6ea1 ("mm: migration: avoid race between shift_arg_pages() and rmap_walk() during migration by not migrating temporary stacks") introduced a BUG_ON() to ensure that VM_STACK_FLAGS and VM_STACK_INCOMPLETE_SETUP do not overlap. The check is a compile time one, so BUILD_BUG_ON is more appropriate. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:03:59 UTC
b0825ee Randy Dunlap 15 June 2011, 22:08:10 UTC lib/bitmap.c: fix kernel-doc notation Fix new kernel-doc warnings in lib/bitmap.c: Warning(lib/bitmap.c:596): No description found for parameter 'buf' Warning(lib/bitmap.c:596): Excess function parameter 'bp' description in '__bitmap_parselist' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:03:59 UTC
0164f69 Randy Dunlap 15 June 2011, 22:08:09 UTC mm/memory.c: fix kernel-doc notation Fix new kernel-doc warnings in mm/memory.c: Warning(mm/memory.c:1327): No description found for parameter 'tlb' Warning(mm/memory.c:1327): Excess function parameter 'tlbp' description in 'unmap_vmas' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:03:59 UTC
f300ea4 Andrea Arcangeli 15 June 2011, 22:08:08 UTC mm: remove khugepaged double thp vmstat update with CONFIG_NUMA=n Johannes noticed the vmstat update is already taken care of by khugepaged_alloc_hugepage() internally. The only places that are required to update the vmstat are the callers of alloc_hugepage (callers of khugepaged_alloc_hugepage aren't). Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 16 June 2011, 03:03:58 UTC
ada9c93 Randy Dunlap 14 June 2011, 22:50:11 UTC signal.c: fix kernel-doc notation Fix kernel-doc warnings in signal.c: Warning(kernel/signal.c:2374): No description found for parameter 'nset' Warning(kernel/signal.c:2374): Excess function parameter 'set' description in 'sys_rt_sigprocmask' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 15 June 2011, 02:12:17 UTC
60b8b1d Andy Whitcroft 14 June 2011, 19:45:10 UTC x86 idle: APM requires pm_idle/default_idle unconditionally when a module [ Also from Ben Hutchings <ben@decadent.org.uk> and Vitaliy Ivanov <vitalivanov@gmail.com> ] Commit 06ae40ce073d ("x86 idle: EXPORT_SYMBOL(default_idle, pm_idle) only when APM demands it") removed the export for pm_idle/default_idle unless the apm module was modularised and CONFIG_APM_CPU_IDLE was set. But the apm module uses pm_idle/default_idle unconditionally, CONFIG_APM_CPU_IDLE only affects the bios idle threshold. Adjust the export accordingly. [ Used #ifdef instead of #if defined() as it's shorter, and what both Ben and Vitaliy used.. Andy, you're out-voted ;) - Linus ] Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 June 2011, 20:42:20 UTC
3a2289a Linus Torvalds 14 June 2011, 18:28:54 UTC Merge branch 'for-linus-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: use kernel processor defines for conditional optimizations m68knommu: create config options for CPU classes m68knommu: fix linker script exported name sections 14 June 2011, 18:28:54 UTC
ca54320 Linus Torvalds 14 June 2011, 18:28:38 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: TOMOYO: Fix oops in tomoyo_mount_acl(). 14 June 2011, 18:28:38 UTC
4068b00 Linus Torvalds 14 June 2011, 18:25:56 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/avr32-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/avr32-2.6: avr32, exec: remove redundant set_fs(USER_DS) avr32: make intc_resume() return void to conform to syscore_ops avr32: add some more at91 to cpu.h definition avr32: set CONFIG_CC_OPTIMIZE_FOR_SIZE=y for all defconfigs avr32/at32ap: fix mapping of platform device id for USART avr32: fix use of non-existing portnr variable in at32_map_usart() 14 June 2011, 18:25:56 UTC
f39e840 Linus Torvalds 14 June 2011, 18:25:32 UTC Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: Compare only lower 32 bits of framebuffer map offsets drm/i915: Don't leak in i915_gem_shmem_pread_slow() drm/radeon/kms: do bounds checking for 3D_LOAD_VBPNTR and bump array limit drm/radeon/kms: fix mac g5 quirk x86/uv/x2apic: update for change in pci bridge handling. alpha, drm: Remove obsolete Alpha support in MGA DRM code alpha/drm: Cleanup Alpha support in DRM generic code savage: remove unnecessary if statement drm/radeon: fix GUI idle IH debug statements drm/radeon/kms: check modes against max pixel clock drm: fix fbs in DRM_IOCTL_MODE_GETRESOURCES ioctl 14 June 2011, 18:25:32 UTC
6211b3e Linus Torvalds 14 June 2011, 18:24:40 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] update cifs version to 1.73 [CIFS] trivial cleanup fscache cFYI and cERROR messages cifs: correctly handle NULL tcon pointer in CIFSTCon cifs: show sec= option in /proc/mounts cifs: don't allow cifs_reconnect to exit with NULL socket pointer CIFS: Fix sparse error 14 June 2011, 18:24:40 UTC
81eb3dd Linus Torvalds 14 June 2011, 18:21:21 UTC Merge branch 'for-linus' of git://neil.brown.name/md * 'for-linus' of git://neil.brown.name/md: md/raid5: remove unusual use of bio_iovec_idx() md/raid5: fix FUA request handling in ops_run_io() md/raid5: fix raid5_set_bi_hw_segments md:Documentation/md.txt - fix typo md/bitmap: remove unused fields from struct bitmap md/bitmap: use proper accessor macro md: check ->hot_remove_disk when removing disk md: Using poll /proc/mdstat can monitor the events of adding a spare disks MD: use is_power_of_2 macro MD: raid5 do not set fullsync MD: support initial bitmap creation in-kernel MD: add sync_super to mddev_t struct MD: raid1 changes to allow use by device mapper MD: move thread wakeups into resume MD: possible typo MD: no sync IO while suspended MD: no integrity register if no gendisk 14 June 2011, 18:21:21 UTC
3e483f4 Linus Torvalds 14 June 2011, 18:19:27 UTC Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Remove cpufreq_stats sysfs entries on module unload. MAINTAINERS: Update CPU FREQUENCY patterns 14 June 2011, 18:19:27 UTC
1252b30 Steve French 14 June 2011, 16:19:54 UTC [CIFS] update cifs version to 1.73 Signed-off-by: Steve French <sfrench@us.ibm.com> 14 June 2011, 16:19:54 UTC
040d15c Steve French 14 June 2011, 15:51:18 UTC [CIFS] trivial cleanup fscache cFYI and cERROR messages ... for uniformity and cleaner debug logs. Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com> 14 June 2011, 15:51:18 UTC
ff71db2 Mathias Krause 10 June 2011, 13:09:05 UTC avr32, exec: remove redundant set_fs(USER_DS) The address limit is already set in flush_old_exec() so this set_fs(USER_DS) is redundant. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> 14 June 2011, 11:38:24 UTC
c162755 Hans-Christian Egtvedt 06 June 2011, 16:19:20 UTC avr32: make intc_resume() return void to conform to syscore_ops This patch removes the unneeded, and now wrong, return 0 from intc_resume() and lets the function return void instead. This matches the resume callback in struct syscore_ops. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> 14 June 2011, 11:37:31 UTC
3000f00 Nicolas Ferre 14 May 2011, 22:23:32 UTC avr32: add some more at91 to cpu.h definition Somme common drivers will need those at91 cpu_is_xxx() definitions. Those definitions are already in Linus' tree so if we want to use them in common drivers, we will need them in AVR32 cpu.h file. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> 14 June 2011, 11:37:30 UTC
a527a14 Hans-Christian Egtvedt 01 June 2011, 13:10:49 UTC avr32: set CONFIG_CC_OPTIMIZE_FOR_SIZE=y for all defconfigs This patch makes sure the kconfig option CC_OPTIMIZE_FOR_SIZE is set to yes for all default configuration files. This ensures the kernel is optimized for size, and avoids potential relocation truncated to fit problems. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> 14 June 2011, 11:37:29 UTC
4137b31 Hans-Christian Egtvedt 08 June 2011, 08:47:25 UTC avr32/at32ap: fix mapping of platform device id for USART This patch will fix the mapping of the platform device id when mapping USART peripheral ID to UART platform device id. Not setting the platform device id will in most cases (when you map USART > 0 to UART 0) make the console not available. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> 14 June 2011, 11:37:29 UTC
7bbf1d4 Hans-Christian Egtvedt 01 June 2011, 09:08:01 UTC avr32: fix use of non-existing portnr variable in at32_map_usart() This patch fixes the use of the non-existing portnr variable in at32_map_usart() to use the provided line number instead. Typo was introduced in commit 2b348e2f82f532e3aff8e0ce9293033b3294c1e0. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> 14 June 2011, 11:37:28 UTC
4e78c72 Tetsuo Handa 13 June 2011, 04:49:11 UTC TOMOYO: Fix oops in tomoyo_mount_acl(). In tomoyo_mount_acl() since 2.6.36, kern_path() was called without checking dev_name != NULL. As a result, an unprivileged user can trigger oops by issuing mount(NULL, "/", "ext3", 0, NULL) request. Fix this by checking dev_name != NULL before calling kern_path(dev_name). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable@kernel.org Signed-off-by: James Morris <jmorris@namei.org> 14 June 2011, 05:18:42 UTC
fcde907 Namhyung Kim 14 June 2011, 04:23:57 UTC md/raid5: remove unusual use of bio_iovec_idx() In the bio_for_each_segment loop, bvl always points current bio_vec, so the same as bio_iovec_idx(, i). Let's get rid of it. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> 14 June 2011, 04:23:57 UTC
b062962 Namhyung Kim 14 June 2011, 04:20:19 UTC md/raid5: fix FUA request handling in ops_run_io() Commit e9c7469bb4f5 ("md: implment REQ_FLUSH/FUA support") introduced R5_WantFUA flag and set rw to WRITE_FUA in that case. However remaining code still checks whether rw is exactly same as WRITE or not, so FUAed-write ends up with being treated as READ. Fix it. This bug has been present since 2.6.37 and the fix is suitable for any -stable kernel since then. It is not clear why this has not caused more problems. Cc: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> 14 June 2011, 04:20:19 UTC
9b2dc8b Namhyung Kim 13 June 2011, 05:48:22 UTC md/raid5: fix raid5_set_bi_hw_segments The @bio->bi_phys_segments consists of active stripes count in the lower 16 bits and processed stripes count in the upper 16 bits. So logical-OR operator should be bitwise one. This bug has been present since 2.6.27 and the fix is suitable for any -stable kernel since then. Fortunately the bad code is only used on error paths and is relatively unlikely to be hit. Cc: stable@kernel.org Signed-off-by: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> 14 June 2011, 04:09:41 UTC
734c3ce Greg Ungerer 02 June 2011, 06:07:33 UTC m68k: use kernel processor defines for conditional optimizations Older m68k-linux compilers will include pre-defined symbols that confuse what processor it is being targeted for. For example gcc-4.1.2 will pre-define __mc68020__ even if you specify the target processor as -m68000 on the gcc command line. Newer versions of gcc have this corrected. In a few places the m68k code uses defined(__mc68020__) for optimizations that include instructions that are specific to the CPU 68020 and above. When compiling with older compilers this will be true even when we have selected to compile for the older 68000 processors. Switch to using the kernel processor defines, CONFIG_M68020 and friends. Signed-off-by: Greg Ungerer <gerg@uclinux.org> 14 June 2011, 01:42:29 UTC
6235672 Greg Ungerer 02 June 2011, 05:50:48 UTC m68knommu: create config options for CPU classes There are 3 families of CPU core types that we support in the m68knommu architecture branch. They are . traditional 68000 . CPU32 (a 68020 core derivative without MMU or bitfield instructions) . ColdFire It will be useful going forward to have a CONFIG_ option defined for each type. We already have one for ColdFire (CONFIG_COLDFIRE), so add for the other 2 families, CONFIG_M68000 and CONFIG_MCPU32. Signed-off-by: Greg Ungerer <gerg@uclinux.org> 14 June 2011, 01:42:29 UTC
dab104a Greg Ungerer 02 June 2011, 04:09:32 UTC m68knommu: fix linker script exported name sections The recent commit titled "module: Sort exported symbols" (f02e8a65) changed the exported symbol name sections. Bring the m68knommu linker script into line with those changes - including the sorting of the symbol names. Signed-off-by: Greg Ungerer <gerg@uclinux.org> 14 June 2011, 01:42:29 UTC
66aa696 Tormod Volden 30 May 2011, 19:45:43 UTC drm: Compare only lower 32 bits of framebuffer map offsets Drivers using multiple framebuffers got broken by commit 41c2e75e60200a860a74b7c84a6375c105e7437f which ignored the framebuffer (or register) map offset when looking for existing maps. The rationale was that the kernel-userspace ABI is fixed at a 32-bit offset, so the real offsets could not always be handed over for comparison. Instead of ignoring the offset we will compare the lower 32 bit. Drivers using multiple framebuffers should just make sure that the lower 32 bit are different. The existing drivers in question are practically limited to 32-bit systems so that should be fine for them. It is assumed that current drivers always specify a correct framebuffer map offset, even if this offset was ignored since above commit. So this patch should not change anything for drivers using only one framebuffer. Drivers needing multiple framebuffers with 64-bit map offsets will need to cook up something, for instance keeping an ID in the lower bit which is to be aligned away when it comes to using the offset. All of above applies to _DRM_REGISTERS as well. Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 14 June 2011, 01:09:54 UTC
b65552f Jesper Juhl 12 June 2011, 20:53:44 UTC drm/i915: Don't leak in i915_gem_shmem_pread_slow() It seems to me that we are leaking 'user_pages' in drivers/gpu/drm/i915/i915_gem.c::i915_gem_shmem_pread_slow() if read_cache_page_gfp() fails. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> 14 June 2011, 01:00:54 UTC
a27bb4b Marek Olšák 10 June 2011, 14:41:26 UTC drm/radeon/kms: do bounds checking for 3D_LOAD_VBPNTR and bump array limit To my knowledge, the limit is 16 on r300. (the docs don't say what the limit is) The lack of bounds checking can be abused to do all sorts of things (from bypassing parts of the CS checker to crashing the kernel). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36745 Cc: stable@kernel.org Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 14 June 2011, 00:59:03 UTC
ab21e60 Alex Deucher 06 June 2011, 16:53:30 UTC drm/radeon/kms: fix mac g5 quirk Apple uses the same subsystem pci ids for lots of hardware much of which is wired up differently. In this case, the G5 imac and the G5 tower. Only apply the quirk configuration to G5 towers. Reported-by: Joachim Henke <j-o@users.sourceforge.net> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Joachim Henke <j-o@users.sourceforge.net> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by: Dave Airlie <airlied@redhat.com> 14 June 2011, 00:05:09 UTC
7ad35cf Dave Airlie 25 May 2011, 04:00:49 UTC x86/uv/x2apic: update for change in pci bridge handling. When I added 3448a19da479b6bd1e28e2a2be9fa16c6a6feb39 I forgot about the special uv handling code for this, so this patch fixes it up. Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Ingo Molnar Signed-off-by: Dave Airlie <airlied@redhat.com> 13 June 2011, 23:50:12 UTC
83533c1 Jay Estabrook 09 June 2011, 22:19:12 UTC alpha, drm: Remove obsolete Alpha support in MGA DRM code Remove an obsolete Alpha adjustment in the drm for MGA on Alpha. Signed-off-by: Jay Estabrook <jay.estabrook@gmail.com> Tested-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 13 June 2011, 23:32:56 UTC
82ba3fe Jay Estabrook 09 June 2011, 22:18:39 UTC alpha/drm: Cleanup Alpha support in DRM generic code Remove an obsolete Alpha adjustment, and modify another, to go with the current Alpha architecture support. Signed-off-by: Jay Estabrook <jay.estabrook@gmail.com> Tested-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 13 June 2011, 23:31:37 UTC
96bf8bd Greg Dietsche 13 June 2011, 14:40:38 UTC savage: remove unnecessary if statement the code always returns ret regardless, so if(ret) check is unnecessary. v2: fixed up the spelling. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Reviewed-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Dave Airlie <airlied@redhat.com> 13 June 2011, 23:29:12 UTC
2c53b43 Linus Torvalds 13 June 2011, 22:29:59 UTC Linux 3.0-rc3 13 June 2011, 22:29:59 UTC
8d1bca3 Jeff Layton 12 June 2011, 01:17:10 UTC cifs: correctly handle NULL tcon pointer in CIFSTCon Long ago (in commit 00e485b0), I added some code to handle share-level passwords in CIFSTCon. That code ignored the fact that it's legit to pass in a NULL tcon pointer when connecting to the IPC$ share on the server. This wasn't really a problem until recently as we only called CIFSTCon this way when the server returned -EREMOTE. With the introduction of commit c1508ca2 however, it gets called this way on every mount, causing an oops when share-level security is in effect. Fix this by simply treating a NULL tcon pointer as if user-level security were in effect. I'm not aware of any servers that protect the IPC$ share with a specific password anyway. Also, add a comment to the top of CIFSTCon to ensure that we don't make the same mistake again. Cc: <stable@kernel.org> Reported-by: Martijn Uffing <mp3project@sarijopen.student.utwente.nl> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> 13 June 2011, 20:34:34 UTC
3e71551 Jeff Layton 13 June 2011, 15:50:41 UTC cifs: show sec= option in /proc/mounts Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> 13 June 2011, 20:34:34 UTC
back to top