https://github.com/torvalds/linux

sort by:
Revision Author Date Message Commit Date
7e1c544 Merge tag 'drm-misc-fixes-2021-10-21-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.15-rc7: - Rebased, to remove vc4 patches. - Fix mxsfb crash on unload. - Use correct sync parameters for Feixin K101-IM2BYL02. - Assorted kmb modeset/atomic fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e66eaf89-b9b9-41f5-d0d2-dad7e59fabb5@linux.intel.com 21 October 2021, 19:35:28 UTC
730b64d Merge tag 'drm-msm-fixes-2021-10-18' of https://gitlab.freedesktop.org/drm/msm into drm-fixes One more fix for v5.15, to work around a power stability issue on a630 (and possibly others) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs1WPLthmd=ToDcEHm=u-7O38RAVJ2XwRoS8xPmC520vg@mail.gmail.com 21 October 2021, 19:22:15 UTC
7405609 drm/kmb: Enable ADV bridge after modeset On KMB, ADV bridge must be programmed and powered on prior to MIPI DSI HW initialization. v2: changed to atomic_bridge_chain_enable (Sam) Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Co-developed-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211019230719.789958-1-anitha.chrisanthus@intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> 21 October 2021, 09:08:09 UTC
004d271 drm/kmb: Corrected typo in handle_lcd_irq Check for Overflow bits for layer3 in the irq handler. Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-5-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> 21 October 2021, 09:08:09 UTC
982f8ad drm/kmb: Disable change of plane parameters Due to HW limitations, KMB cannot change height, width, or pixel format after initial plane configuration. v2: removed memset disp_cfg as it is already zero. Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-4-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> 21 October 2021, 09:08:08 UTC
13047a0 drm/kmb: Remove clearing DPHY regs Don't clear the shared DPHY registers common to MIPI Rx and MIPI Tx during DSI initialization since this was causing MIPI Rx reset. Rest of the writes are bitwise, so will not affect Mipi Rx side. Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-3-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> 21 October 2021, 09:08:08 UTC
a79f40c drm/kmb: Limit supported mode to 1080p KMB only supports single resolution(1080p), this commit checks for 1920x1080x60 or 1920x1080x59 in crtc_mode_valid. Also, modes with vfp < 4 are not supported in KMB display. This change prunes display modes with vfp < 4. v2: added vfp check Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Co-developed-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Edmund Dea <edmund.j.dea@intel.com> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link:https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-2-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> 21 October 2021, 09:08:08 UTC
3e4c31e drm/kmb: Work around for higher system clock Use a different value for system clock offset in the ppl/llp ratio calculations for clocks higher than 500 Mhz. Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-1-anitha.chrisanthus@intel.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> 21 October 2021, 09:08:08 UTC
7729706 drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel This adjusts sync values according to the datasheet Fixes: 1c243751c095 ("drm/panel: ilitek-ili9881c: add support for Feixin K101-IM2BYL02 panel") Co-developed-by: Marius Gripsgard <marius@ubports.com> Signed-off-by: Dan Johansen <strit@manjaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210818214818.298089-1-strit@manjaro.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> 21 October 2021, 09:08:08 UTC
3cfc183 drm: mxsfb: Fix NULL pointer dereference crash on unload The mxsfb->crtc.funcs may already be NULL when unloading the driver, in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from mxsfb_unload() leads to NULL pointer dereference. Since all we care about is masking the IRQ and mxsfb->base is still valid, just use that to clear and mask the IRQ. Fixes: ae1ed00932819 ("drm: mxsfb: Stop using DRM simple display pipeline helper") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Abrecht <public@danielabrecht.ch> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211016210446.171616-1-marex@denx.de Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> 21 October 2021, 09:08:08 UTC
5ca6779 drm/msm/devfreq: Restrict idle clamping to a618 for now Until we better understand the stability issues caused by frequent frequency changes, lets limit them to a618. Signed-off-by: Rob Clark <robdclark@chromium.org> Tested-by: John Stultz <john.stultz@linaro.org> Tested-by: Caleb Connolly <caleb.connolly@linaro.org> Link: https://lore.kernel.org/r/20211018153627.2787882-1-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org> 18 October 2021, 21:31:57 UTC
519d819 Linux 5.15-rc6 18 October 2021, 06:00:13 UTC
cd079b1 Merge tag 'libata-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull libata fixes from Damien Le Moal: "Two fixes for this cycle: - Fix a null pointer dereference in ahci-platform driver (from Hai) - Fix uninitialized variables in pata_legacy driver (from Dan)" * tag 'libata-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators() pata_legacy: fix a couple uninitialized variable bugs 18 October 2021, 05:39:22 UTC
f2b3420 Merge tag 'block-5.15-2021-10-17' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "Bigger than usual for this point in time, the majority is fixing some issues around BDI lifetimes with the move from the request_queue to the disk in this release. In detail: - Series on draining fs IO for del_gendisk() (Christoph) - NVMe pull request via Christoph: - fix the abort command id (Keith Busch) - nvme: fix per-namespace chardev deletion (Adam Manzanares) - brd locking scope fix (Tetsuo) - BFQ fix (Paolo)" * tag 'block-5.15-2021-10-17' of git://git.kernel.dk/linux-block: block, bfq: reset last_bfqq_created on group change block: warn when putting the final reference on a registered disk brd: reduce the brd_devices_mutex scope kyber: avoid q->disk dereferences in trace points block: keep q_usage_counter in atomic mode after del_gendisk block: drain file system I/O on del_gendisk block: split bio_queue_enter from blk_queue_enter block: factor out a blk_try_enter_queue helper block: call submit_bio_checks under q_usage_counter nvme: fix per-namespace chardev deletion block/rnbd-clt-sysfs: fix a couple uninitialized variable bugs nvme-pci: Fix abort command id 18 October 2021, 05:25:20 UTC
cc0af0a Merge tag 'io_uring-5.15-2021-10-17' of git://git.kernel.dk/linux-block Pull io_uring fix from Jens Axboe: "Just a single fix for a wrong condition for grabbing a lock, a regression in this merge window" * tag 'io_uring-5.15-2021-10-17' of git://git.kernel.dk/linux-block: io_uring: fix wrong condition to grab uring lock 18 October 2021, 05:20:13 UTC
3bb50f8 Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fixes from Michael Tsirkin: "Fixes up some issues in rc5" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost-vdpa: Fix the wrong input in config_cb VDUSE: fix documentation underline warning Revert "virtio-blk: Add validation for block size in config space" vhost_vdpa: unset vq irq before freeing irq virtio: write back F_VERSION_1 before validate 18 October 2021, 04:17:19 UTC
be9eb2f Merge tag 'powerpc-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a bug where guests on P9 with interrupts passed through could get stuck in synchronize_irq(). - Fix a bug in KVM on P8 where secondary threads entering a guest would write outside their allocated stack. - Fix a bug in KVM on P8 where secondary threads could confuse the host offline code and cause the guest or host to crash. Thanks to Cédric Le Goater. * tag 'powerpc-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV: Make idle_kvm_start_guest() return 0 if it went to guest KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest() powerpc/xive: Discard disabled interrupts in get_irqchip_state() 18 October 2021, 04:01:32 UTC
6890aca Merge tag 'objtool_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Borislav Petkov: - Update section headers before the respective relocations to not trigger a safety check in elftoolchain's implementation of libelf - Do not add garbage data to the .rela.orc_unwind_ip section * tag 'objtool_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Update section header before relocations objtool: Check for gelf_update_rel[a] failures 18 October 2021, 03:41:39 UTC
f644750 Merge tag 'edac_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: - Log the "correct" uncorrectable error count in the armada_xp driver * tag 'edac_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/armada-xp: Fix output of uncorrectable error counter 18 October 2021, 03:36:39 UTC
60ebc28 Merge tag 'perf_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Borislav Petkov: - Add Sapphire Rapids to the list of CPUs supporting the SMI count MSR * tag 'perf_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/msr: Add Sapphire Rapids CPU support 18 October 2021, 03:34:18 UTC
424e7d8 Merge tag 'efi-urgent-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Borislav Petkov: "Forwarded from Ard Biesheuvel through the tip tree. Ard will send stuff directly in the near future. Low priority fixes but fixes nonetheless: - update stub diagnostic print that is no longer accurate - avoid statically allocated buffer for CPER error record decoding - avoid sleeping on the efi_runtime semaphore when calling the ResetSystem EFI runtime service" * tag 'efi-urgent-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Change down_interruptible() in virt_efi_reset_system() to down_trylock() efi/cper: use stack buffer for error record decoding efi/libstub: Simplify "Exiting bootservices" message 18 October 2021, 03:30:49 UTC
89f6602 Merge tag 'x86_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Do not enable AMD memory encryption in Kconfig by default due to shortcomings of some platforms, leading to boot failures. - Mask out invalid bits in the MXCSR for 32-bit kernels again because Thomas and I don't know how to mask out bits properly. Third time's the charm. * tag 'x86_urgent_for_v5.15_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Mask out the invalid MXCSR bits properly x86/Kconfig: Do not enable AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT automatically 18 October 2021, 03:27:22 UTC
cf52ad5 Merge tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some small driver core fixes for 5.15-rc6, all of which have been in linux-next for a while with no reported issues. They include: - kernfs negative dentry bugfix - simple pm bus fixes to resolve reported issues" * tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers: bus: Delete CONFIG_SIMPLE_PM_BUS drivers: bus: simple-pm-bus: Add support for probing simple bus only devices driver core: Reject pointless SYNC_STATE_ONLY device links kernfs: don't create a negative dentry if inactive node exists 18 October 2021, 03:17:28 UTC
e3572df Merge tag 'char-misc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 5.15-rc6 for reported issues that include: - habanalabs driver fixes - mei driver fixes and new ids - fpga new device ids - MAINTAINER file updates for fpga subsystem - spi module id table additions and fixes - fastrpc locking fixes - nvmem driver fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: eeprom: 93xx46: fix MODULE_DEVICE_TABLE nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells mei: hbm: drop hbm responses on early shutdown mei: me: add Ice Lake-N device id. eeprom: 93xx46: Add SPI device ID table eeprom: at25: Add SPI ID table misc: HI6421V600_IRQ should depend on HAS_IOMEM misc: fastrpc: Add missing lock before accessing find_vma() cb710: avoid NULL pointer subtraction misc: gehc: Add SPI ID table MAINTAINERS: Drop outdated FPGA Manager website MAINTAINERS: Add Hao and Yilun as maintainers habanalabs: fix resetting args in wait for CS IOCTL fpga: ice40-spi: Add SPI device ID table 18 October 2021, 03:14:00 UTC
a563ae0 Merge tag 'staging-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here are a number of small IIO and staging driver fixes for 5.15-rc6. They include: - vc04_services bugfix for reported problem - r8188eu array underflow fix - iio driver fixes for a lot of tiny reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: prevent array underflow in rtw_hal_update_ra_mask() staging: vc04_services: shut up out-of-range warning iio: light: opt3001: Fixed timeout error when 0 lux iio: adis16480: fix devices that do not support sleep mode iio: mtk-auxadc: fix case IIO_CHAN_INFO_PROCESSED iio: adis16475: fix deadlock on frequency set iio: ssp_sensors: add more range checking in ssp_parse_dataframe() iio: ssp_sensors: fix error code in ssp_print_mcu_debug() iio: adc: ad7793: Fix IRQ flag iio: adc: ad7780: Fix IRQ flag iio: adc: ad7192: Add IRQ flag iio: adc: aspeed: set driver data when adc probe. iio: adc: rzg2l_adc: add missing clk_disable_unprepare() in rzg2l_adc_pm_runtime_resume() iio: adc: max1027: Fix the number of max1X31 channels iio: adc: max1027: Fix wrong shift with 12-bit devices iio: adc128s052: Fix the error handling path of 'adc128_probe()' iio: adc: rzg2l_adc: Fix -EBUSY timeout error return iio: accel: fxls8962af: return IRQ_HANDLED when fifo is flushed iio: dac: ti-dac5571: fix an error code in probe() 18 October 2021, 03:10:00 UTC
b9e42b3 Merge tag 'tty-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fix from Greg KH: "Here is a single 8250 Kconfig fix for 5.15-rc6 that resolves a regression that showed up in 5.15-rc1. It has been in linux-next for a while with no reported issues" * tag 'tty-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250: allow disabling of Freescale 16550 compile test 18 October 2021, 03:06:31 UTC
ebf613a Merge tag 'usb-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes that resolve a number of tiny issues. They include: - new USB serial driver ids - xhci driver fixes for a bunch of issues - musb error path fixes. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: musb: dsps: Fix the probe error path xhci: Enable trust tx length quirk for Fresco FL11 USB controller xhci: Fix command ring pointer corruption while aborting a command USB: xhci: dbc: fix tty registration race xhci: add quirk for host controllers that don't update endpoint DCS xhci: guard accesses to ep_state in xhci_endpoint_reset() USB: serial: qcserial: add EM9191 QDL support USB: serial: option: add Quectel EC200S-CN module support USB: serial: option: add prod. id for Quectel EG91 USB: serial: option: add Telit LE910Cx composition 0x1204 18 October 2021, 03:02:00 UTC
12dbbfa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a new product ID for the xpad joystick driver - fixes to resistive-adc-touch and snvs_pwrkey drivers - a change to touchscreen helpers to make clang happier * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: touchscreen - avoid bitwise vs logical OR warning Input: xpad - add support for another USB ID of Nacon GC-100 Input: resistive-adc-touch - fix division by zero error on z1 == 0 Input: snvs_pwrkey - add clk handling 18 October 2021, 02:57:06 UTC
d29bd41 block, bfq: reset last_bfqq_created on group change Since commit 430a67f9d616 ("block, bfq: merge bursts of newly-created queues"), BFQ maintains a per-group pointer to the last bfq_queue created. If such a queue, say bfqq, happens to move to a different group, then bfqq is no more a valid last bfq_queue created for its previous group. That pointer must then be cleared. Not resetting such a pointer may also cause UAF, if bfqq happens to also be freed after being moved to a different group. This commit performs this missing reset. As such it fixes commit 430a67f9d616 ("block, bfq: merge bursts of newly-created queues"). Such a missing reset is most likely the cause of the crash reported in [1]. With some analysis, we found that this crash was due to the above UAF. And such UAF did go away with this commit applied [1]. Anyway, before this commit, that crash happened to be triggered in conjunction with commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges"). The latter was then reverted by commit ebc69e897e17 ("Revert "block, bfq: honor already-setup queue merges""). Yet commit 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") contains no error related with the above UAF, and can then be restored. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214503 Fixes: 430a67f9d616 ("block, bfq: merge bursts of newly-created queues") Tested-by: Grzegorz Kowal <custos.mentis@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20211015144336.45894-2-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk> 17 October 2021, 13:03:02 UTC
a204176 block: warn when putting the final reference on a registered disk Warn when the last reference on a live disk is put without calling del_gendisk first. There are some BDI related bug reports that look like a case of this, so make sure we have the proper instrumentation to catch it. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211014130231.1468538-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> 17 October 2021, 12:59:45 UTC
f7bf358 brd: reduce the brd_devices_mutex scope As with commit 8b52d8be86d72308 ("loop: reorder loop_exit"), unregister_blkdev() needs to be called first in order to avoid calling brd_alloc() from brd_probe() after brd_del_one() from brd_exit(). Then, we can avoid holding global mutex during add_disk()/del_gendisk() as with commit 1c500ad706383f1a ("loop: reduce the loop_ctl_mutex scope"). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/e205f13d-18ff-a49c-0988-7de6ea5ff823@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk> 17 October 2021, 12:51:19 UTC
d999ade Merge tag 'perf-tools-fixes-for-v5.15-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix 'perf test evsel' build error on !x86 architectures - Fix libperf's test_stat_cpu mixup of CPU numbers and CPU indexes - Output offsets for decompressed records, not just useless zeros * tag 'perf-tools-fixes-for-v5.15-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: libperf tests: Fix test_stat_cpu libperf test evsel: Fix build error on !x86 architectures perf report: Output non-zero offset for decompressed records 16 October 2021, 18:11:07 UTC
ccfb5ce Merge tag 'fixes-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fix from Mike Rapoport: "Fix handling of NOMAP regions with kmemleak. NOMAP regions don't have linear map entries so an attempt to scan these areas in kmemleak would fault. Prevent such faults by excluding NOMAP regions from kmemleak" * tag 'fixes-2021-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock: exclude NOMAP regions from kmemleak 16 October 2021, 17:57:13 UTC
368a978 Merge tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Tracing fixes for 5.15: - Fix defined but not use warning/error for osnoise function - Fix memory leak in event probe - Fix memblock leak in bootconfig - Fix the API of event probes to be like kprobes - Added test to check removal of event probe API - Fix recordmcount.pl for nds32 failed build * tag 'trace-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^' selftests/ftrace: Update test for more eprobe removal process tracing: Fix event probe removal from dynamic events tracing: Fix missing * in comment block bootconfig: init: Fix memblock leak in xbc_make_cmdline() tracing: Fix memory leak in eprobe_register() tracing: Fix missing osnoise tracer on max_latency 16 October 2021, 17:51:41 UTC
6985c40 Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk driver fixes from Stephen Boyd: "Clk driver fixes for critical issues found in the past few weeks: - Select gdsc config so qcom sm6350 driver probes - Fix a register offset in qcom gcc-sm6115 so the correct clk is controlled - Fix inverted logic in Renesas RZ/G2L .is_enabled() - Mark some more clks critical in Renesas clk driver - Remove a duplicate clk in the agilex driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: add select QCOM_GDSC for SM6350 clk: qcom: gcc-sm6115: Fix offset for hlos1_vote_turing_mmu_tbu0_gdsc clk: socfpga: agilex: fix duplicate s2f_user0_clk clk: renesas: rzg2l: Fix clk status function clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical 16 October 2021, 17:22:08 UTC
dcd6198 Merge tag 'for-5.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM verity target to skip redundant processing on I/O errors. - Fix request-based DM so that it doesn't queue request to blk-mq when DM device is suspended. - Fix DM core mempool NULL pointer race when completing IO. - Make DM clone target's 'descs' array static. * tag 'for-5.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix mempool NULL pointer race when completing IO dm rq: don't queue request to blk-mq during DM suspend dm clone: make array 'descs' static dm verity: skip redundant verity_handle_err() on I/O errors 16 October 2021, 17:12:21 UTC
304040f Merge tag 's390-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Maintainers and reviewers changes: * Cornelia decided to free up her time and step down from vfio-ccw maintainer and s390 kvm reviewer duties * Add Alexander Gordeev as s390 arch code reviewer - Fix broken strrchr implementation * tag 's390-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: add Alexander Gordeev as reviewer s390: fix strrchr() implementation vfio-ccw: step down as maintainer KVM: s390: remove myself as reviewer 16 October 2021, 16:14:55 UTC
c13f946 Merge tag 'csky-for-linus-5.15-rc6' of git://github.com/c-sky/csky-linux Pull csky fixes from Guo Ren: "Only 5 fixups: - Make HAVE_TCM depend on !COMPILE_TEST - bitops: Remove duplicate __clear_bit define - Select ARCH_WANT_FRAME_POINTERS only if compiler supports it - Fixup regs.sr broken in ptrace - don't let sigreturn play with priveleged bits of status register" * tag 'csky-for-linus-5.15-rc6' of git://github.com/c-sky/csky-linux: csky: Make HAVE_TCM depend on !COMPILE_TEST csky: bitops: Remove duplicate __clear_bit define csky: Select ARCH_WANT_FRAME_POINTERS only if compiler supports it csky: Fixup regs.sr broken in ptrace csky: don't let sigreturn play with priveleged bits of status register 16 October 2021, 16:12:18 UTC
5fd01b7 Merge tag 'arc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fix from Vineet Gupta: "Small fixlet for ARC" * tag 'arc-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: fix potential build snafu 16 October 2021, 16:09:27 UTC
f042981 Merge tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A small number fixes this time, mostly touching actual code: - Add platform device for i.MX System Reset Controller (SRC) to fix a regression caused by fw_devlink change - A fixup for a boot regression caused by my own rework for the Qualcomm SCM driver - Multiple bugfixes for the Arm FFA and optee firmware drivers, addressing problems when they are built as a loadable module - Four dts bugfixes for the Broadcom SoC used in Raspberry pi, addressing VEC (video encoder), MDIO bus controller #address-cells/#size-cells, SDIO voltage and PCIe host bridge dtc warnings" * tag 'arm-soc-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: imx: register reset controller from a platform driver iommu/arm: fix ARM_SMMU_QCOM compilation ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting tee: optee: Fix missing devices unregister during optee_remove ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states ARM: dts: bcm2711: fix MDIO #address- and #size-cells ARM: dts: bcm283x: Fix VEC address for BCM2711 firmware: arm_ffa: Fix __ffa_devices_unregister firmware: arm_ffa: Add missing remove callback to ffa_bus_type 16 October 2021, 16:05:58 UTC
5a7ee55 Merge tag 'pci-v5.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: - Don't save msi_populate_sysfs() error code as dev->msi_irq_groups so we don't dereference the error code as a pointer (Wang Hai) * tag 'pci-v5.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/MSI: Handle msi_populate_sysfs() errors correctly 16 October 2021, 16:00:46 UTC
711c368 Merge tag 'acpi-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Add a missing device ID to a quirk list in the suspend-to-idle support code" * tag 'acpi-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Include alternate AMDI0005 id in special behaviour 16 October 2021, 15:45:46 UTC
b2381ac x86/fpu: Mask out the invalid MXCSR bits properly This is a fix for the fix (yeah, /facepalm). The correct mask to use is not the negation of the MXCSR_MASK but the actual mask which contains the supported bits in the MXCSR register. Reported and debugged by Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: d298b03506d3 ("x86/fpu: Restore the masking out of reserved MXCSR bits") Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ser Olmy <ser.olmy@protonmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/YWgYIYXLriayyezv@intel.com 16 October 2021, 10:37:50 UTC
a02dcde Input: touchscreen - avoid bitwise vs logical OR warning A new warning in clang points out a few places in this driver where a bitwise OR is being used with boolean types: drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This use of a bitwise OR is intentional, as bitwise operations do not short circuit, which allows all the calls to touchscreen_get_prop_u32() to happen so that the last parameter is initialized while coalescing the results of the calls to make a decision after they are all evaluated. To make this clearer to the compiler, use the '|=' operator to assign the result of each touchscreen_get_prop_u32() call to data_present, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 16 October 2021, 05:22:54 UTC
3378a07 Input: xpad - add support for another USB ID of Nacon GC-100 The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 16 October 2021, 05:11:04 UTC
fe0a7e3 Input: resistive-adc-touch - fix division by zero error on z1 == 0 For proper pressure calculation we need at least x and z1 to be non zero. Even worse, in case z1 we may run in to division by zero error. Fixes: 60b7db914ddd ("Input: resistive-adc-touch - rework mapping of channels") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20211007095727.29579-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 16 October 2021, 05:11:03 UTC
d997cc1 Input: snvs_pwrkey - add clk handling On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an associated clock. Accessing the registers requires that this clock is enabled. Binding the driver on at least i.MX7S and i.MX8MP while not having the clock enabled results in a complete hang of the machine. (This usually only happens if snvs_pwrkey is built as a module and the rtc-snvs driver isn't already bound because at bootup the required clk is on and only gets disabled when the clk framework disables unused clks late during boot.) This completes the fix in commit 135be16d3505 ("ARM: dts: imx7s: add snvs clock to pwrkey"). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 16 October 2021, 05:11:01 UTC
c411080 kyber: avoid q->disk dereferences in trace points q->disk becomes invalid after the gendisk is removed. Work around this by caching the dev_t for the tracepoints. The real fix would be to properly tear down the I/O schedulers with the gendisk, but that is a much more invasive change. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211012093301.GA27795@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 16 October 2021, 03:02:57 UTC
aec89dc block: keep q_usage_counter in atomic mode after del_gendisk Don't switch back to percpu mode to avoid the double RCU grace period when tearing down SCSI devices. After removing the disk only passthrough commands can be send anyway. Suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210929071241.934472-6-hch@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 16 October 2021, 03:02:54 UTC
8e141f9 block: drain file system I/O on del_gendisk Instead of delaying draining of file system I/O related items like the blk-qos queues, the integrity read workqueue and timeouts only when the request_queue is removed, do that when del_gendisk is called. This is important for SCSI where the upper level drivers that control the gendisk are separate entities, and the disk can be freed much earlier than the request_queue, or can even be unbound without tearing down the queue. Fixes: edb0872f44ec ("block: move the bdi from the request_queue to the gendisk") Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210929071241.934472-5-hch@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 16 October 2021, 03:02:50 UTC
a674153 block: split bio_queue_enter from blk_queue_enter To prepare for fixing a gendisk shutdown race, open code the blk_queue_enter logic in bio_queue_enter. This also removes the pointless flags translation. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210929071241.934472-4-hch@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 16 October 2021, 03:02:47 UTC
1f14a09 block: factor out a blk_try_enter_queue helper Factor out the code to try to get q_usage_counter without blocking into a separate helper. Both to improve code readability and to prepare for splitting bio_queue_enter from blk_queue_enter. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20210929071241.934472-3-hch@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 16 October 2021, 03:02:44 UTC
cc9c884 block: call submit_bio_checks under q_usage_counter Ensure all bios check the current values of the queue under freeze protection, i.e. to make sure the zero capacity set by del_gendisk is actually seen before dispatching to the driver. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210929071241.934472-2-hch@lst.de Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> 16 October 2021, 03:02:36 UTC
be358af nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^' I received a build failure for a new patch I'm working on the nds32 architecture, and when I went to test it, I couldn't get to my build error, because it failed to build with a bunch of: Error: invalid operands (*UND* and *UND* sections) for `^' issues with various files. Those files were temporary asm files that looked like: kernel/.tmp_mc_fork.s I decided to look deeper, and found that the "mc" portion of that name stood for "mcount", and was created by the recordmcount.pl script. One that I wrote over a decade ago. Once I knew the source of the problem, I was able to investigate it further. The way the recordmcount.pl script works (BTW, there's a C version that simply modifies the ELF object) is by doing an "objdump" on the object file. Looks for all the calls to "mcount", and creates an offset of those locations from some global variable it can use (usually a global function name, found with <.*>:). Creates a asm file that is a table of references to these locations, using the found variable/function. Compiles it and links it back into the original object file. This asm file is called ".tmp_mc_<object_base_name>.s". The problem here is that the objdump produced by the nds32 object file, contains things that look like: 0000159a <.L3^B1>: 159a: c6 00 beqz38 $r6, 159a <.L3^B1> 159a: R_NDS32_9_PCREL_RELA .text+0x159e 159c: 84 d2 movi55 $r6, #-14 159e: 80 06 mov55 $r0, $r6 15a0: ec 3c addi10.sp #0x3c Where ".L3^B1 is somehow selected as the "global" variable to index off of. Then the assembly file that holds the mcount locations looks like this: .section __mcount_loc,"a",@progbits .align 2 .long .L3^B1 + -5522 .long .L3^B1 + -5384 .long .L3^B1 + -5270 .long .L3^B1 + -5098 .long .L3^B1 + -4970 .long .L3^B1 + -4758 .long .L3^B1 + -4122 [...] And when it is compiled back to an object to link to the original object, the compile fails on the "^" symbol. Simple solution for now, is to have the perl script ignore using function symbols that have an "^" in the name. Link: https://lkml.kernel.org/r/20211014143507.4ad2c0f7@gandalf.local.home Cc: stable@vger.kernel.org Acked-by: Greentime Hu <green.hu@gmail.com> Fixes: fbf58a52ac088 ("nds32/ftrace: Add RECORD_MCOUNT support") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 16 October 2021, 02:44:16 UTC
c3ca31c ARC: fix potential build snafu In the big pgtable header split, I inadvertently introduced a couple of duplicate symbols. Fixes: fe6cb7b043b69cd9 ("ARC: mm: disintegrate pgtable.h into levels and flags") Signed-off-by: Vineet Gupta <vgupta@kernel.org> 16 October 2021, 01:06:32 UTC
e21e52a csky: Make HAVE_TCM depend on !COMPILE_TEST Building csky:allmodconfig results in the following build errors. arch/csky/mm/tcm.c:9:2: error: #error "You should define ITCM_RAM_BASE" 9 | #error "You should define ITCM_RAM_BASE" | ^~~~~ arch/csky/mm/tcm.c:14:2: error: #error "You should define DTCM_RAM_BASE" 14 | #error "You should define DTCM_RAM_BASE" | ^~~~~ arch/csky/mm/tcm.c:18:2: error: #error "You should define correct DTCM_RAM_BASE" 18 | #error "You should define correct DTCM_RAM_BASE" This is seen with compile tests since those enable HAVE_TCM, but do not provide useful default values for ITCM_RAM_BASE or DTCM_RAM_BASE. Disable HAVE_TCM for commpile tests to avoid the error. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guo Ren <guoren@kernel.org> 15 October 2021, 23:20:12 UTC
fb5d69a csky: bitops: Remove duplicate __clear_bit define Building csky:allmodconfig results in the following build error. In file included from ./include/linux/bitops.h:33, from ./include/linux/log2.h:12, from kernel/bounds.c:13: ./arch/csky/include/asm/bitops.h:77: error: "__clear_bit" redefined Since commit 9248e52fec95 ("locking/atomic: simplify non-atomic wrappers"), __clear_bit is defined in include/asm-generic/bitops/non-atomic.h, and the define in the csky include file is no longer necessary or useful. Remove it. Fixes: 9248e52fec95 ("locking/atomic: simplify non-atomic wrappers") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guo Ren <guoren@kernel.org> 15 October 2021, 23:20:12 UTC
aeba0b8 csky: Select ARCH_WANT_FRAME_POINTERS only if compiler supports it Compiling csky:allmodconfig with an upstream C compiler results in the following error. csky-linux-gcc: error: unrecognized command-line option '-mbacktrace'; did you mean '-fbacktrace'? Select ARCH_WANT_FRAME_POINTERS only if gcc supports it to avoid the error. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guo Ren <guoren@kernel.org> 15 October 2021, 23:20:12 UTC
af89eba csky: Fixup regs.sr broken in ptrace gpr_get() return the entire pt_regs (include sr) to userspace, if we don't restore the C bit in gpr_set, it may break the ALU result in that context. So the C flag bit is part of gpr context, that's why riscv totally remove the C bit in the ISA. That makes sr reg clear from userspace to supervisor privilege. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org 15 October 2021, 23:20:12 UTC
fbd63c0 csky: don't let sigreturn play with priveleged bits of status register csky restore_sigcontext() blindly overwrites regs->sr with the value it finds in sigcontext. Attacker can store whatever they want in there, which includes things like S-bit. Userland shouldn't be able to set that, or anything other than C flag (bit 0). Do the same thing other architectures with protected bits in flags register do - preserve everything that shouldn't be settable in user mode, picking the rest from the value saved is sigcontext. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org 15 October 2021, 23:20:12 UTC
011ace4 Merge tag 'imx-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.15, round 3: - Add platform device for i.MX System Reset Controller (SRC) to fix a regression caused by fw_devlink change. * tag 'imx-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: register reset controller from a platform driver Link: https://lore.kernel.org/r/20211015070017.GI22881@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de> 15 October 2021, 18:48:08 UTC
8fe31e0 Merge tag 'gpio-fixes-for-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix module autoloading on gpio-74x164 after a revert of OF modaliases - fix problems with the bias setting in gpio-pca953x - fix a use-after-free bug in gpio-mockup by using software nodes * tag 'gpio-fixes-for-v5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: mockup: Convert to use software nodes gpio: pca953x: Improve bias setting gpio: 74x164: Add SPI device ID table 15 October 2021, 14:27:20 UTC
985f6ab Merge tag 'spi-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few small fixes. Mostly driver specific but there's one in the core which fixes a deadlock when adding devices on spi-mux that's triggered because spi-mux is a SPI device which is itself a SPI controller and so can instantiate devices when registered. We were using a global lock to protect against reusing chip selects but they're a per controller thing so moving the lock per controller resolves that" * tag 'spi-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi-mux: Fix false-positive lockdep splats spi: Fix deadlock when adding SPI controllers on SPI buses spi: bcm-qspi: clear MSPI spifie interrupt during probe spi: spi-nxp-fspi: don't depend on a specific node name erratum workaround spi: mediatek: skip delays if they are 0 spi: atmel: Fix PDC transfer setup bug spi: spidev: Add SPI ID table spi: Use 'flash' node name instead of 'spi-flash' in example 15 October 2021, 14:21:46 UTC
ccb6a66 Merge tag 'regulator-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "Just a trivial fix to the MAINTAINERS file for an update missed during conversion of the DT bindings to YAML format" * tag 'regulator-fix-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: MAINTAINERS: rectify entry for SY8106A REGULATOR DRIVER 15 October 2021, 14:20:18 UTC
9e795d9 Merge tag 'mtd/fixes-for-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fix from Miquel Raynal: "Raw NAND controller driver fix: - Qcom: Update code word value for raw reads (QPIC v2+)" * tag 'mtd/fixes-for-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: qcom: Update code word value for raw read 15 October 2021, 14:13:00 UTC
591a495 Merge tag 'drm-fixes-2021-10-15-1' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "It has a few scattered msm and i915 fixes, a few core fixes and a mediatek feature revert. I've had to pick a bunch of patches into this, as the drm-misc-fixes tree had a bunch of vc4 patches I wasn't comfortable with sending to you at least as part of this, they were delayed due to your reverts. If it's really useful as fixes I'll do a separate pull. Summary: Core: - clamp fbdev size - edid cap blocks read to avoid out of bounds panel: - fix missing crc32 dependency msm: - Fix a new crash on dev file close if the dev file was opened when GPU is not loaded (such as missing fw in initrd) - Switch to single drm_sched_entity per priority level per drm_file to unbreak multi-context userspace - Serialize GMU access to fix GMU OOB errors - Various error path fixes - A couple integer overflow fixes - Fix mdp5 cursor plane WARNs i915: - Fix ACPI object leak - Fix context leak in user proto-context creation - Fix missing i915_sw_fence_fini call hyperv: - hide hw pointer nouveau: - fix engine selection bit r128: - fix UML build rcar-du: - unconncted LVDS regression fix mediatek: - revert CMDQ refinement patches" * tag 'drm-fixes-2021-10-15-1' of git://anongit.freedesktop.org/drm/drm: (34 commits) drm/panel: olimex-lcd-olinuxino: select CRC32 drm/r128: fix build for UML drm/nouveau/fifo: Reinstate the correct engine bit programming drm/hyperv: Fix double mouse pointers drm/fbdev: Clamp fbdev surface size if too large drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read drm/i915: Free the returned object of acpi_evaluate_dsm() drm/i915: Fix bug in user proto-context creation that leaked contexts drm: rcar-du: Don't create encoder for unconnected LVDS outputs drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handling drm/msm/dsi: Fix an error code in msm_dsi_modeset_init() drm/msm/dsi: dsi_phy_14nm: Take ready-bit into account in poll_for_ready drm/msm/dsi/phy: fix clock names in 28nm_8960 phy drm/msm/dpu: Fix address of SM8150 PINGPONG5 IRQ register drm/msm: Do not run snapshot on non-DPU devices drm/msm/a3xx: fix error handling in a3xx_gpu_init() drm/msm/a4xx: fix error handling in a4xx_gpu_init() drm/msm: Fix null pointer dereference on pointer edp drm/msm/mdp5: fix cursor-related warnings drm/msm: Avoid potential overflow in timeout_to_jiffies() ... 15 October 2021, 14:09:09 UTC
86a44e9 Merge tag 'ntfs3_for_5.15' of git://github.com/Paragon-Software-Group/linux-ntfs3 Pull ntfs3 fixes from Konstantin Komarov: "Use the new api for mounting as requested by Christoph. Also fixed: - some memory leaks and panic - xfstests (tested on x86_64) generic/016 generic/021 generic/022 generic/041 generic/274 generic/423 - some typos, wrong returned error codes, dead code, etc" * tag 'ntfs3_for_5.15' of git://github.com/Paragon-Software-Group/linux-ntfs3: (70 commits) fs/ntfs3: Check for NULL pointers in ni_try_remove_attr_list fs/ntfs3: Refactor ntfs_read_mft fs/ntfs3: Refactor ni_parse_reparse fs/ntfs3: Refactor ntfs_create_inode fs/ntfs3: Refactor ntfs_readlink_hlp fs/ntfs3: Rework ntfs_utf16_to_nls fs/ntfs3: Fix memory leak if fill_super failed fs/ntfs3: Keep prealloc for all types of files fs/ntfs3: Remove unnecessary functions fs/ntfs3: Forbid FALLOC_FL_PUNCH_HOLE for normal files fs/ntfs3: Refactoring of ntfs_set_ea fs/ntfs3: Remove locked argument in ntfs_set_ea fs/ntfs3: Use available posix_acl_release instead of ntfs_posix_acl_release fs/ntfs3: Check for NULL if ATTR_EA_INFO is incorrect fs/ntfs3: Refactoring of ntfs_init_from_boot fs/ntfs3: Reject mount if boot's cluster size < media sector size fs/ntfs3: Refactoring lock in ntfs_init_acl fs/ntfs3: Change posix_acl_equiv_mode to posix_acl_update_mode fs/ntfs3: Pass flags to ntfs_set_ea in ntfs_set_acl_ex fs/ntfs3: Refactor ntfs_get_acl_ex for better readability ... 15 October 2021, 13:58:11 UTC
cdeb5d7 KVM: PPC: Book3S HV: Make idle_kvm_start_guest() return 0 if it went to guest We call idle_kvm_start_guest() from power7_offline() if the thread has been requested to enter KVM. We pass it the SRR1 value that was returned from power7_idle_insn() which tells us what sort of wakeup we're processing. Depending on the SRR1 value we pass in, the KVM code might enter the guest, or it might return to us to do some host action if the wakeup requires it. If idle_kvm_start_guest() is able to handle the wakeup, and enter the guest it is supposed to indicate that by returning a zero SRR1 value to us. That was the behaviour prior to commit 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C"), however in that commit the handling of SRR1 was reworked, and the zeroing behaviour was lost. Returning from idle_kvm_start_guest() without zeroing the SRR1 value can confuse the host offline code, causing the guest to crash and other weirdness. Fixes: 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211015133929.832061-2-mpe@ellerman.id.au 15 October 2021, 13:40:03 UTC
9b4416c KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest() In commit 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") kvm_start_guest() became idle_kvm_start_guest(). The old code allocated a stack frame on the emergency stack, but didn't use the frame to store anything, and also didn't store anything in its caller's frame. idle_kvm_start_guest() on the other hand is written more like a normal C function, it creates a frame on entry, and also stores CR/LR into its callers frame (per the ABI). The problem is that there is no caller frame on the emergency stack. The emergency stack for a given CPU is allocated with: paca_ptrs[i]->emergency_sp = alloc_stack(limit, i) + THREAD_SIZE; So emergency_sp actually points to the first address above the emergency stack allocation for a given CPU, we must not store above it without first decrementing it to create a frame. This is different to the regular kernel stack, paca->kstack, which is initialised to point at an initial frame that is ready to use. idle_kvm_start_guest() stores the backchain, CR and LR all of which write outside the allocation for the emergency stack. It then creates a stack frame and saves the non-volatile registers. Unfortunately the frame it creates is not large enough to fit the non-volatiles, and so the saving of the non-volatile registers also writes outside the emergency stack allocation. The end result is that we corrupt whatever is at 0-24 bytes, and 112-248 bytes above the emergency stack allocation. In practice this has gone unnoticed because the memory immediately above the emergency stack happens to be used for other stack allocations, either another CPUs mc_emergency_sp or an IRQ stack. See the order of calls to irqstack_early_init() and emergency_stack_init(). The low addresses of another stack are the top of that stack, and so are only used if that stack is under extreme pressue, which essentially never happens in practice - and if it did there's a high likelyhood we'd crash due to that stack overflowing. Still, we shouldn't be corrupting someone else's stack, and it is purely luck that we aren't corrupting something else. To fix it we save CR/LR into the caller's frame using the existing r1 on entry, we then create a SWITCH_FRAME_SIZE frame (which has space for pt_regs) on the emergency stack with the backchain pointing to the existing stack, and then finally we switch to the new frame on the emergency stack. Fixes: 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211015133929.832061-1-mpe@ellerman.id.au 15 October 2021, 13:39:54 UTC
cd932c2 Merge tag 'usb-serial-5.15-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.15-rc6 Here are some new modem device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-5.15-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: qcserial: add EM9191 QDL support USB: serial: option: add Quectel EC200S-CN module support USB: serial: option: add prod. id for Quectel EG91 USB: serial: option: add Telit LE910Cx composition 0x1204 15 October 2021, 13:04:02 UTC
71920ea perf/x86/msr: Add Sapphire Rapids CPU support SMI_COUNT MSR is supported on Sapphire Rapids CPU. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1633551137-192083-1-git-send-email-kan.liang@linux.intel.com 15 October 2021, 09:25:26 UTC
f427527 eeprom: 93xx46: fix MODULE_DEVICE_TABLE The newly added SPI device ID table does not work because the entry is incorrectly copied from the OF device table. During build testing, this shows as a compile failure when building it as a loadable module: drivers/misc/eeprom/eeprom_93xx46.c:424:1: error: redefinition of '__mod_of__eeprom_93xx46_of_table_device_table' MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table); Change the entry to refer to the correct symbol. Fixes: 137879f7ff23 ("eeprom: 93xx46: Add SPI device ID table") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211014153730.3821376-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 15 October 2021, 08:54:02 UTC
a14bc10 drm/panel: olimex-lcd-olinuxino: select CRC32 Fix the following build/link error by adding a dependency on the CRC32 routines: ld: drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.o: in function `lcd_olinuxino_probe': panel-olimex-lcd-olinuxino.c:(.text+0x303): undefined reference to `crc32_le' Fixes: 17fd7a9d324fd ("drm/panel: Add support for Olimex LCD-OLinuXino panel") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211012115242.10325-1-vegard.nossum@oracle.com Signed-off-by: Dave Airlie <airlied@redhat.com> 15 October 2021, 05:05:13 UTC
1a361b4 drm/r128: fix build for UML Fix a build error on CONFIG_UML, which does not support (provide) wbinvd(). UML can use the generic mb() instead. ../drivers/gpu/drm/r128/ati_pcigart.c: In function ‘drm_ati_pcigart_init’: ../drivers/gpu/drm/r128/ati_pcigart.c:218:2: error: implicit declaration of function ‘wbinvd’ [-Werror=implicit-function-declaration] wbinvd(); ^~~~~~ Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: linux-um@lists.infradead.org Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211011080006.31081-1-rdunlap@infradead.org Signed-off-by: Dave Airlie <airlied@redhat.com> 15 October 2021, 05:05:10 UTC
d1d94b0 drm/nouveau/fifo: Reinstate the correct engine bit programming Commit 64f7c698bea9 ("drm/nouveau/fifo: add engine_id hook") replaced fifo/chang84.c g84_fifo_chan_engine() call with an indirect call of fifo/g84.c g84_fifo_engine_id(). The G84_FIFO_ENGN_* values returned from the later g84_fifo_engine_id() are incremented by 1 compared to the previous g84_fifo_chan_engine() return values. This is fine either way for most of the code, except this one line where an engine bit programmed into the hardware is derived from the return value. Decrement the return value accordingly, otherwise the wrong engine bit is programmed into the hardware and that leads to the following failure: nouveau 0000:01:00.0: gr: 00000030 [ILLEGAL_MTHD ILLEGAL_CLASS] ch 1 [003fbce000 DRM] subc 3 class 0000 mthd 085c data 00000420 On the following hardware: lspci -s 01:00.0 01:00.0 VGA compatible controller: NVIDIA Corporation GT216GLM [Quadro FX 880M] (rev a2) lspci -ns 01:00.0 01:00.0 0300: 10de:0a3c (rev a2) Fixes: 64f7c698bea9 ("drm/nouveau/fifo: add engine_id hook") Signed-off-by: Marek Vasut <marex@denx.de> Cc: <stable@vger.kernel.org> # 5.12+ Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211007214117.231472-1-marex@denx.de Signed-off-by: Dave Airlie <airlied@redhat.com> 15 October 2021, 05:04:58 UTC
b253c30 drm/hyperv: Fix double mouse pointers Hyper-V supports a hardware cursor feature. It is not used by Linux VM, but the Hyper-V host still draws a point as an extra mouse pointer, which is unwanted, especially when Xorg is running. The hyperv_fb driver uses synthvid_send_ptr() to hide the unwanted pointer. When the hyperv_drm driver was developed, the function synthvid_send_ptr() was not copied from the hyperv_fb driver. Fix the issue by adding the function into hyperv_drm. Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Deepak Rawat <drawat.floss@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210916193644.45650-1-decui@microsoft.com Signed-off-by: Dave Airlie <airlied@redhat.com> 15 October 2021, 05:04:44 UTC
b693e42 drm/fbdev: Clamp fbdev surface size if too large Clamp the fbdev surface size of the available maximumi height to avoid failing to init console emulation. An example error is shown below. bad framebuffer height 2304, should be >= 768 && <= 768 [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0 simple-framebuffer simple-framebuffer.0: [drm] *ERROR* fbdev: Failed to setup generic emulation (ret=-22) This is especially a problem with drivers that have very small screen sizes and cannot over-allocate at all. v2: * reduce warning level (Ville) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Amanoel Dawod <kernel@amanoeldawod.com> Reported-by: Zoltán Kővágó <dirty.ice.hu@gmail.com> Reported-by: Michael Stapelberg <michael+lkml@stapelberg.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maxime Ripard <maxime@cerno.tech> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v5.14+ Link: https://patchwork.freedesktop.org/patch/msgid/20211005070355.7680-1-tzimmermann@suse.de Signed-off-by: Dave Airlie <airlied@redhat.com> 15 October 2021, 05:04:05 UTC
9779417 drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read In commit e11f5bd8228f ("drm: Add support for DP 1.4 Compliance edid corruption test") the function connector_bad_edid() started assuming that the memory for the EDID passed to it was big enough to hold `edid[0x7e] + 1` blocks of data (1 extra for the base block). It completely ignored the fact that the function was passed `num_blocks` which indicated how much memory had been allocated for the EDID. Let's fix this by adding a bounds check. This is important for handling the case where there's an error in the first block of the EDID. In that case we will call connector_bad_edid() without having re-allocated memory based on `edid[0x7e]`. Fixes: e11f5bd8228f ("drm: Add support for DP 1.4 Compliance edid corruption test") Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211005192905.v2.1.Ib059f9c23c2611cb5a9d760e7d0a700c1295928d@changeid Signed-off-by: Dave Airlie <airlied@redhat.com> 15 October 2021, 05:03:57 UTC
6011106 Merge tag 'mediatek-drm-fixes-5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes Mediatek DRM Fixes for Linux 5.15 1. Revert series "CMDQ refinement of Mediatek DRM driver" Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211013235044.5488-1-chunkuang.hu@kernel.org 15 October 2021, 05:02:57 UTC
a1467fa ARM: imx: register reset controller from a platform driver Starting with commit 6b2117ad65f1 ("of: property: fw_devlink: Add support for "resets" and "pwms""), the imx-drm driver fails to load due to forever dormant devlinks to the reset-controller node. This node was never associated with a struct device. Add a platform device to allow fw_devnode to activate the devlinks. Fixes: 6b2117ad65f1 ("of: property: fw_devlink: Add support for "resets" and "pwms"") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> 15 October 2021, 01:38:06 UTC
1483f0a Merge tag 'drm-intel-fixes-2021-10-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.15-rc6: - Fix ACPI object leak - Fix context leak in user proto-context creation - Fix missing i915_sw_fence_fini call Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87zgrbvgls.fsf@intel.com 15 October 2021, 00:00:48 UTC
ec681c5 Merge tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Quite calm. The noisy DSA driver (embedded switches) changes, and adjustment to IPv6 IOAM behavior add to diffstat's bottom line but are not scary. Current release - regressions: - af_unix: rename UNIX-DGRAM to UNIX to maintain backwards compatibility - procfs: revert "add seq_puts() statement for dev_mcast", minor format change broke user space Current release - new code bugs: - dsa: fix bridge_num not getting cleared after ports leaving the bridge, resource leak - dsa: tag_dsa: send packets with TX fwd offload from VLAN-unaware bridges using VID 0, prevent packet drops if pvid is removed - dsa: mv88e6xxx: keep the pvid at 0 when VLAN-unaware, prevent HW getting confused about station to VLAN mapping Previous releases - regressions: - virtio-net: fix for skb_over_panic inside big mode - phy: do not shutdown PHYs in READY state - dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY's, fix link LED staying lit after ifdown - mptcp: fix possible infinite wait on recvmsg(MSG_WAITALL) - mqprio: Correct stats in mqprio_dump_class_stats() - ice: fix deadlock for Tx timestamp tracking flush - stmmac: fix feature detection on old hardware Previous releases - always broken: - sctp: account stream padding length for reconf chunk - icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe() - isdn: cpai: check ctr->cnr to avoid array index out of bound - isdn: mISDN: fix sleeping function called from invalid context - nfc: nci: fix potential UAF of rf_conn_info object - dsa: microchip: prevent ksz_mib_read_work from kicking back in after it's canceled in .remove and crashing - dsa: mv88e6xxx: isolate the ATU databases of standalone and bridged ports - dsa: sja1105, ocelot: break circular dependency between switch and tag drivers - dsa: felix: improve timestamping in presence of packe loss - mlxsw: thermal: fix out-of-bounds memory accesses Misc: - ipv6: ioam: move the check for undefined bits to improve interoperability" * tag 'net-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits) icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe MAINTAINERS: Update the devicetree documentation path of imx fec driver sctp: account stream padding length for reconf chunk mlxsw: thermal: Fix out-of-bounds memory accesses ethernet: s2io: fix setting mac address during resume NFC: digital: fix possible memory leak in digital_in_send_sdd_req() NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() nfc: fix error handling of nfc_proto_register() Revert "net: procfs: add seq_puts() statement for dev_mcast" net: encx24j600: check error in devm_regmap_init_encx24j600 net: korina: select CRC32 net: arc: select CRC32 net: dsa: felix: break at first CPU port during init and teardown net: dsa: tag_ocelot_8021q: fix inability to inject STP BPDUs into BLOCKING ports net: dsa: felix: purge skb from TX timestamping queue if it cannot be sent net: dsa: tag_ocelot_8021q: break circular dependency with ocelot switch lib net: dsa: tag_ocelot: break circular dependency with ocelot switch lib driver net: mscc: ocelot: cross-check the sequence id from the timestamp FIFO with the skb PTP header net: mscc: ocelot: deny TX timestamping of non-PTP packets net: mscc: ocelot: warn when a PTP IRQ is raised for an unknown skb ... 14 October 2021, 22:21:39 UTC
3ff6d64 libperf tests: Fix test_stat_cpu The `cpu` argument of perf_evsel__read() must specify the cpu index. perf_cpu_map__for_each_cpu() is for iterating the cpu number (not index) and is thus not appropriate for use with perf_evsel__read(). So, if there is an offline CPU, the cpu number specified in the argument may point out of range because the cpu number and the cpu index are different. Fix test_stat_cpu(). Testing it: # make tests -C tools/lib/perf/ make: Entering directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf' running static: - running tests/test-cpumap.c...OK - running tests/test-threadmap.c...OK - running tests/test-evlist.c...OK - running tests/test-evsel.c...OK running dynamic: - running tests/test-cpumap.c...OK - running tests/test-threadmap.c...OK - running tests/test-evlist.c...OK - running tests/test-evsel.c...OK make: Leaving directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf' Signed-off-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20211011083704.4108720-1-nakamura.shun@fujitsu.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 14 October 2021, 18:41:35 UTC
f304c8d libperf test evsel: Fix build error on !x86 architectures In test_stat_user_read, following build error occurs except i386 and x86_64 architectures: tests/test-evsel.c:129:31: error: variable 'pc' set but not used [-Werror=unused-but-set-variable] struct perf_event_mmap_page *pc; Fix build error. Signed-off-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20211006095703.477826-1-nakamura.shun@fujitsu.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 14 October 2021, 18:41:35 UTC
8e820f9 perf report: Output non-zero offset for decompressed records Print offset of PERF_RECORD_COMPRESSED record instead of zero for decompressed records in raw trace dump (-D option of perf-report): 0x17cf08 [0x28]: event: 9 instead of: 0 [0x28]: event: 9 The fix is not critical, because currently file_pos for compressed events is used in perf_session__process_event only to show offsets in the raw dump. This patch was separated from patchset: https://lore.kernel.org/lkml/cover.1629186429.git.alexey.v.bayduraev@linux.intel.com/ and was already rewieved. Reviewed-by: Riccardo Mancini <rickyman7@gmail.com> Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com> Tested-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Budankov <abudankov@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210929091445.18274-1-alexey.v.bayduraev@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> 14 October 2021, 18:41:35 UTC
baa0ab2 Merge tag 'nvme-5.15-2021-10-14' of git://git.infradead.org/nvme into block-5.15 Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.15: - fix the abort command id (Keith Busch) - nvme: fix per-namespace chardev deletion (Adam Manzanares)" * tag 'nvme-5.15-2021-10-14' of git://git.infradead.org/nvme: nvme: fix per-namespace chardev deletion nvme-pci: Fix abort command id 14 October 2021, 15:07:14 UTC
14cfbb7 io_uring: fix wrong condition to grab uring lock Grab uring lock when we are in io-worker rather than in the original or system-wq context since we already hold it in these two situation. Signed-off-by: Hao Xu <haoxu@linux.alibaba.com> Fixes: b66ceaf324b3 ("io_uring: move iopoll reissue into regular IO path") Link: https://lore.kernel.org/r/20211014140400.50235-1-haoxu@linux.alibaba.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 14 October 2021, 15:06:11 UTC
1fcd794 icmp: fix icmp_ext_echo_iio parsing in icmp_build_probe In icmp_build_probe(), the icmp_ext_echo_iio parsing should be done step by step and skb_header_pointer() return value should always be checked, this patch fixes 3 places in there: - On case ICMP_EXT_ECHO_CTYPE_NAME, it should only copy ident.name from skb by skb_header_pointer(), its len is ident_len. Besides, the return value of skb_header_pointer() should always be checked. - On case ICMP_EXT_ECHO_CTYPE_INDEX, move ident_len check ahead of skb_header_pointer(), and also do the return value check for skb_header_pointer(). - On case ICMP_EXT_ECHO_CTYPE_ADDR, before accessing iio->ident.addr. ctype3_hdr.addrlen, skb_header_pointer() should be called first, then check its return value and ident_len. On subcases ICMP_AFI_IP and ICMP_AFI_IP6, also do check for ident. addr.ctype3_hdr.addrlen and skb_header_pointer()'s return value. On subcase ICMP_AFI_IP, the len for skb_header_pointer() should be "sizeof(iio->extobj_hdr) + sizeof(iio->ident.addr.ctype3_hdr) + sizeof(struct in_addr)" or "ident_len". v1->v2: - To make it more clear, call skb_header_pointer() once only for iio->indent's parsing as Jakub Suggested. v2->v3: - The extobj_hdr.length check against sizeof(_iio) should be done before calling skb_header_pointer(), as Eric noticed. Fixes: d329ea5bd884 ("icmp: add response to RFC 8335 PROBE messages") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/31628dd76657ea62f5cf78bb55da6b35240831f1.1634205050.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 14 October 2021, 14:54:47 UTC
ea142b0 MAINTAINERS: Update the devicetree documentation path of imx fec driver Change the devicetree documentation path to "Documentation/devicetree/bindings/net/fsl,fec.yaml" since 'fsl-fec.txt' has been converted to 'fsl,fec.yaml' already. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20211014110214.3254-1-caihuoqing@baidu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 14 October 2021, 14:22:40 UTC
a2d859e sctp: account stream padding length for reconf chunk sctp_make_strreset_req() makes repeated calls to sctp_addto_chunk() which will automatically account for padding on each call. inreq and outreq are already 4 bytes aligned, but the payload is not and doing SCTP_PAD4(a + b) (which _sctp_make_chunk() did implicitly here) is different from SCTP_PAD4(a) + SCTP_PAD4(b) and not enough. It led to possible attempt to use more buffer than it was allocated and triggered a BUG_ON. Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Greg KH <gregkh@linuxfoundation.org> Fixes: cc16f00f6529 ("sctp: add support for generating stream reconf ssn reset request chunk") Reported-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/b97c1f8b0c7ff79ac4ed206fc2c49d3612e0850c.1634156849.git.mleitner@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 14 October 2021, 14:15:22 UTC
332fdf9 mlxsw: thermal: Fix out-of-bounds memory accesses Currently, mlxsw allows cooling states to be set above the maximum cooling state supported by the driver: # cat /sys/class/thermal/thermal_zone2/cdev0/type mlxsw_fan # cat /sys/class/thermal/thermal_zone2/cdev0/max_state 10 # echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state # echo $? 0 This results in out-of-bounds memory accesses when thermal state transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the transition table is accessed with a too large index (state) [1]. According to the thermal maintainer, it is the responsibility of the driver to reject such operations [2]. Therefore, return an error when the state to be set exceeds the maximum cooling state supported by the driver. To avoid dead code, as suggested by the thermal maintainer [3], partially revert commit a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels") that tried to interpret these invalid cooling states (above the maximum) in a special way. The cooling levels array is not removed in order to prevent the fans going below 20% PWM, which would cause them to get stuck at 0% PWM. [1] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290 Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 #122 Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016 Workqueue: events_freezable_power_ thermal_zone_device_check Call Trace: dump_stack_lvl+0x8b/0xb3 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b thermal_cooling_device_stats_update+0x271/0x290 __thermal_cdev_update+0x15e/0x4e0 thermal_cdev_update+0x9f/0xe0 step_wise_throttle+0x770/0xee0 thermal_zone_device_update+0x3f6/0xdf0 process_one_work+0xa42/0x1770 worker_thread+0x62f/0x13e0 kthread+0x3ee/0x4e0 ret_from_fork+0x1f/0x30 Allocated by task 1: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 thermal_cooling_device_setup_sysfs+0x153/0x2c0 __thermal_cooling_device_register.part.0+0x25b/0x9c0 thermal_cooling_device_register+0xb3/0x100 mlxsw_thermal_init+0x5c5/0x7e0 __mlxsw_core_bus_device_register+0xcb3/0x19c0 mlxsw_core_bus_device_register+0x56/0xb0 mlxsw_pci_probe+0x54f/0x710 local_pci_probe+0xc6/0x170 pci_device_probe+0x2b2/0x4d0 really_probe+0x293/0xd10 __driver_probe_device+0x2af/0x440 driver_probe_device+0x51/0x1e0 __driver_attach+0x21b/0x530 bus_for_each_dev+0x14c/0x1d0 bus_add_driver+0x3ac/0x650 driver_register+0x241/0x3d0 mlxsw_sp_module_init+0xa2/0x174 do_one_initcall+0xee/0x5f0 kernel_init_freeable+0x45a/0x4de kernel_init+0x1f/0x210 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff8881052f7800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 1016 bytes inside of 1024-byte region [ffff8881052f7800, ffff8881052f7c00) The buggy address belongs to the page: page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0 head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x200000000010200(slab|head|node=0|zone=2) raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67-1895-1fdc45c0244e@linaro.org/ [3] https://lore.kernel.org/linux-pm/af9857f2-578e-de3a-e62b-6baff7e69fd4@linaro.org/ CC: Daniel Lezcano <daniel.lezcano@linaro.org> Fixes: a50c1e35650b ("mlxsw: core: Implement thermal zone") Fixes: a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20211012174955.472928-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 14 October 2021, 14:13:26 UTC
40507e7 ethernet: s2io: fix setting mac address during resume After recent cleanups, gcc started warning about a suspicious memcpy() call during the s2io_io_resume() function: In function '__dev_addr_set', inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:318:2, inlined from 's2io_set_mac_addr' at drivers/net/ethernet/neterion/s2io.c:5205:2, inlined from 's2io_io_resume' at drivers/net/ethernet/neterion/s2io.c:8569:7: arch/x86/include/asm/string_32.h:182:25: error: '__builtin_memcpy' accessing 6 bytes at offsets 0 and 2 overlaps 4 bytes at offset 2 [-Werror=restrict] 182 | #define memcpy(t, f, n) __builtin_memcpy(t, f, n) | ^~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/netdevice.h:4648:9: note: in expansion of macro 'memcpy' 4648 | memcpy(dev->dev_addr, addr, len); | ^~~~~~ What apparently happened is that an old cleanup changed the calling conventions for s2io_set_mac_addr() from taking an ethernet address as a character array to taking a struct sockaddr, but one of the callers was not changed at the same time. Change it to instead call the low-level do_s2io_prog_unicast() function that still takes the old argument type. Fixes: 2fd376884558 ("S2io: Added support set_mac_address driver entry point") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211013143613.2049096-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 14 October 2021, 14:12:33 UTC
26d6574 MAINTAINERS: Update entry for the Stratix10 firmware Richard Gong is no longer at Intel, so update the MAINTAINER's entry for the Stratix10 firmware drivers. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 14 October 2021, 13:55:45 UTC
1626d9a Merge tag 'sound-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This contains quite a few device-specific fixes for usual HD- and USB-audio in addition to a couple of ALSA core fixes (a UAF fix in sequencer and a fix for a misplaced PCM 32bit compat ioctl). Nothing really stands out" * tag 'sound-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Add quirk for VF0770 ALSA: hda: avoid write to STATESTS if controller is in reset ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JW ALSA: pcm: Workaround for a wrong offset in SYNC_PTR compat ioctl ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2 ALSA: hda: intel: Allow repeatedly probing on codec configuration errors ALSA: hda/realtek: Add quirk for TongFang PHxTxX1 ALSA: hda/realtek - ALC236 headset MIC recording issue ALSA: usb-audio: Enable rate validation for Scarlett devices ALSA: hda/realtek: Add quirk for Clevo X170KM-G ALSA: hda/realtek: Complete partial device name to avoid ambiguity ALSA: hda - Enable headphone mic on Dell Latitude laptops with ALC3254 ALSA: seq: Fix a potential UAF by wrong private_free call order ALSA: hda/realtek: Enable 4-speaker output for Dell Precision 5560 laptop ALSA: usb-audio: Fix a missing error check in scarlett gen2 mixer 14 October 2021, 13:53:36 UTC
16a8e2f spi-mux: Fix false-positive lockdep splats io_mutex is taken by spi_setup() and spi-mux's .setup() callback calls spi_setup() which results in a nested lock of io_mutex. add_lock is taken by spi_add_device(). The device_add() call in there can result in calling spi-mux's .probe() callback which registers its own spi controller which in turn results in spi_add_device() being called again. To fix this initialize the controller's locks already in spi_alloc_controller() to give spi_mux_probe() a chance to set the lockdep subclass. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211013133710.2679703-2-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> 14 October 2021, 12:32:19 UTC
6098475 spi: Fix deadlock when adding SPI controllers on SPI buses Currently we have a global spi_add_lock which we take when adding new devices so that we can check that we're not trying to reuse a chip select that's already controlled. This means that if the SPI device is itself a SPI controller and triggers the instantiation of further SPI devices we trigger a deadlock as we try to register and instantiate those devices while in the process of doing so for the parent controller and hence already holding the global spi_add_lock. Since we only care about concurrency within a single SPI bus move the lock to be per controller, avoiding the deadlock. This can be easily triggered in the case of spi-mux. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@kernel.org> 14 October 2021, 11:47:29 UTC
d9b7748 EDAC/armada-xp: Fix output of uncorrectable error counter The number of correctable errors is displayed as uncorrectable errors because the "SBE" error count is passed to both calls of edac_mc_handle_error(). Pass the correct uncorrectable error count to the second edac_mc_handle_error() call when logging uncorrectable errors. [ bp: Massage commit message. ] Fixes: 7f6998a41257 ("ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC") Signed-off-by: Hans Potsch <hans.potsch@nokia.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20211006121332.58788-1-hans.potsch@nokia.com 14 October 2021, 09:46:03 UTC
be5eb93 nvme: fix per-namespace chardev deletion Decrease reference count of chardevice during char device deletion in order to fix a memory leak. Add a release callabck for the device associated chardev and move ida_simple_remove into the release function. Fixes: 2637baed7801 ("nvme: introduce generic per-namespace chardev") Reported-by: Yi Zhang <yi.zhang@redhat.com> Suggested-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Adam Manzanares <a.manzanares@samsung.com> Reviewed-by: Javier González <javier@javigon.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> 14 October 2021, 06:07:47 UTC
776c750 ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators() I got a null-ptr-deref report: KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] ... RIP: 0010:regulator_enable+0x84/0x260 ... Call Trace: ahci_platform_enable_regulators+0xae/0x320 ahci_platform_enable_resources+0x1a/0x120 ahci_probe+0x4f/0x1b9 platform_probe+0x10b/0x280 ... entry_SYSCALL_64_after_hwframe+0x44/0xae If devm_regulator_get() in ahci_platform_get_resources() fails, hpriv->phy_regulator will point to NULL, when enabling or disabling it, null-ptr-deref will occur. ahci_probe() ahci_platform_get_resources() devm_regulator_get(, "phy") // failed, let phy_regulator = NULL ahci_platform_enable_resources() ahci_platform_enable_regulators() regulator_enable(hpriv->phy_regulator) // null-ptr-deref commit 962399bb7fbf ("ata: libahci_platform: Fix regulator_get_optional() misuse") replaces devm_regulator_get_optional() with devm_regulator_get(), but PHY regulator omits to delete "hpriv->phy_regulator = NULL;" like AHCI. Delete it like AHCI regulator to fix this bug. Fixes: commit 962399bb7fbf ("ata: libahci_platform: Fix regulator_get_optional() misuse") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> 14 October 2021, 03:22:47 UTC
cbcc507 Merge branch 'fix-two-possible-memory-leak-problems-in-nfc-digital-module' Ziyang Xuan says: ==================== Fix two possible memory leak problems in NFC digital module. ==================== Link: https://lore.kernel.org/r/cover.1634111083.git.william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> 14 October 2021, 00:44:32 UTC
back to top