Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
d389c7d Linus Torvalds 04 June 2008, 16:43:58 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: [ALSA] hda - COMPAL IFL90/JFL-92 laptop quirk [ALSA] hda - Fix resume of auto-config mode with Realtek codecs [ALSA] hda - Fix model for LG LS75 laptop [ALSA] hda - Fix mic input on HP2133 [ALSA] ac97 - Fix ASUS A9T laptop output 04 June 2008, 16:43:58 UTC
4ded383 Linus Torvalds 04 June 2008, 16:15:51 UTC Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip: x86, fpu: fix CONFIG_PREEMPT=y corruption of application's FPU stack suspend-vs-iommu: prevent suspend if we could not resume x86: section mismatch fix x86: fix Xorg crash with xf86MapVidMem error x86: fix pointer type warning in arch/x86/mm/init_64.c:early_memtest x86: fix bad pmd ffff810000207xxx(9090909090909090) x86: ioremap fix failing nesting check x86: fix broken math-emu with lazy allocation of fpu area x86: enable preemption in delay x86: disable preemption in native_smp_prepare_cpus x86: fix APIC warning on 32bit v2 04 June 2008, 16:15:51 UTC
e97dcb0 Casey Schaufler 02 June 2008, 17:04:32 UTC Smack: fuse mount hang fix The d_instantiate hook for Smack can hang on the root inode of a filesystem if the file system code has not really done all the set-up. Fuse is known to encounter this problem. This change detects an attempt to instantiate a root inode and addresses it early in the processing, before any attempt is made to do something that might hang. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Tested-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 June 2008, 15:50:43 UTC
246dd41 Linus Torvalds 04 June 2008, 15:36:56 UTC Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl libata: kill unused constants sata_mv: PHY_MODE4 cleanups [libata] ata_piix: more acer short cable quirks [libata] ACPI: Properly handle bay devices in dock stations 04 June 2008, 15:36:56 UTC
2d9b57f Linus Torvalds 04 June 2008, 15:36:09 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] qla2xxx: Update version number to 8.02.01-k4. [SCSI] qla2xxx: Correct handling of AENs postings for vports. [SCSI] qla2xxx: Revert "qla2xxx: Use proper HA during asynchronous event handling." [SCSI] ibmvscsi: Non SCSI error status fixup [SCSI] fusion mpt: fix target missing after resetting external raid [SCSI] fix intermittent oops in scsi_bus_uevent [SCSI] qla2xxx: Update version number to 8.02.01-k3. [SCSI] qla2xxx: Revert "qla2xxx: Validate mid-layer 'underflow' during check-condition handling." [SCSI] qla2xxx: Disable local-interrupts while polling for RISC status. [SCSI] qla2xxx: Extend the 'fw_dump' SYSFS node the ability to initiate a firmware dump. [SCSI] qla2xxx: Don't depend on mailbox return values while enabling FCE tracing. [SCSI] qla2xxx: Convert vport_sem to a mutex [SCSI] qla2xxx: firmware semaphore to mutex [SCSI] qla2xxx: Correct locking within MSI-X interrupt handlers. [SCSI] qla2xxx: Display driver version at module init-time. [SCSI] qla2xxx: Return correct port_type to FC-transport for Vports. 04 June 2008, 15:36:09 UTC
df6ab55 Linus Torvalds 04 June 2008, 15:35:44 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.26 * git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.26: sh: Add defconfig for RSK7203. sh: Update SE7206 defconfig. sh: Disable 4KSTACKS on nommu. sh: fix miscompilation of ip_fast_csum with gcc >= 4.3 sh: module.c use kernel unaligned helpers sh/kernel/cpu/irq/intc-sh5.c build fix 04 June 2008, 15:35:44 UTC
3b5b60b Linus Torvalds 04 June 2008, 15:08:27 UTC Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdbts: Use HW breakpoints with CONFIG_DEBUG_RODATA kgdb: use common ascii helpers and put_unaligned_be32 helper 04 June 2008, 15:08:27 UTC
d430a22 Al Viro 02 June 2008, 09:59:02 UTC bogus format in ip6mr ptrdiff_t is %t..., not %Z... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 June 2008, 15:06:02 UTC
c409d52 Al Viro 02 June 2008, 09:59:02 UTC celleb_scc_pciex endianness misannotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 June 2008, 15:06:02 UTC
9307245 Al Viro 02 June 2008, 09:59:02 UTC mpc52xx_gpio iomem annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 June 2008, 15:06:02 UTC
1a79d1c Al Viro 02 June 2008, 09:59:02 UTC s2io iomem annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 June 2008, 15:06:02 UTC
1d92cfd Al Viro 02 June 2008, 09:59:02 UTC cifs endianness fixes __le16 fields used as host-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Steve French <smfrench@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 June 2008, 15:06:01 UTC
6399e7a Al Viro 02 June 2008, 09:59:02 UTC isp1760-if iomem annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 June 2008, 15:06:01 UTC
fa4144b Al Viro 02 June 2008, 09:59:02 UTC cdc-wdm endianness fixes * wMaxPacketSize is le16; copying it to a field of local structure and then using that field as host-endian (size of object to be allocated) is broken. * bMaxPacketSize0 is 8-bit; feeding it to le16_to_cpu() is bogus and since the result is used as host-endian, it's not even misspelled cpu_to_le16(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 June 2008, 15:06:01 UTC
76e6f25 Al Viro 02 June 2008, 09:59:02 UTC usb/c67x00 endianness annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 June 2008, 15:06:01 UTC
a064d5b Al Viro 02 June 2008, 09:59:02 UTC ibmaem endianness annotations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 04 June 2008, 15:06:01 UTC
870568b Suresh Siddha 02 June 2008, 22:57:27 UTC x86, fpu: fix CONFIG_PREEMPT=y corruption of application's FPU stack Jürgen Mell reported an FPU state corruption bug under CONFIG_PREEMPT, and bisected it to commit v2.6.19-1363-gacc2076, "i386: add sleazy FPU optimization". Add tsk_used_math() checks to prevent calling math_state_restore() which can sleep in the case of !tsk_used_math(). This prevents making a blocking call in __switch_to(). Apparently "fpu_counter > 5" check is not enough, as in some signal handling and fork/exec scenarios, fpu_counter > 5 and !tsk_used_math() is possible. It's a side effect though. This is the failing scenario: process 'A' in save_i387_ia32() just after clear_used_math() Got an interrupt and pre-empted out. At the next context switch to process 'A' again, kernel tries to restore the math state proactively and sees a fpu_counter > 0 and !tsk_used_math() This results in init_fpu() during the __switch_to()'s math_state_restore() And resulting in fpu corruption which will be saved/restored (save_i387_fxsave and restore_i387_fxsave) during the remaining part of the signal handling after the context switch. Bisected-by: Jürgen Mell <j.mell@t-online.de> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Jürgen Mell <j.mell@t-online.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org 04 June 2008, 14:21:24 UTC
cd76374 Pavel Machek 29 May 2008, 07:30:21 UTC suspend-vs-iommu: prevent suspend if we could not resume iommu/gart support misses suspend/resume code, which can do bad stuff, including memory corruption on resume. Prevent system suspend in case we would be unable to resume. Signed-off-by: Pavel Machek <pavel@suse.cz> Tested-by: Patrick <ragamuffin@datacomm.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> 04 June 2008, 11:11:47 UTC
be524fb Andrew Morton 29 May 2008, 07:01:28 UTC x86: section mismatch fix Fix this: WARNING: vmlinux.o(.text+0x114bb): Section mismatch in reference from the function nopat() to the function .cpuinit.text:pat_disable() The function nopat() references the function __cpuinit pat_disable(). This is often because nopat lacks a __cpuinit annotation or the annotation of pat_disable is wrong. Reported-by: "Fabio Comolli" <fabio.comolli@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> 04 June 2008, 11:11:47 UTC
282c454 Venki Pallipadi 29 May 2008, 19:01:44 UTC x86: fix Xorg crash with xf86MapVidMem error Clarify the usage of mtrr_lookup() in PAT code, and to make PAT code resilient to mtrr lookup problems. Specifically, pat_x_mtrr_type() is restructured to highlight, under what conditions we look for mtrr hint. pat_x_mtrr_type() uses a default type when there are any errors in mtrr lookup (still maintaining the pat consistency). And, reserve_memtype() highlights its usage ot mtrr_lookup for request type of '-1' and also defaults in a sane way on any mtrr lookup failure. pat.c looks at mtrr type of a range to get a hint on what mapping type to request when user/API: (1) hasn't specified any type (/dev/mem mapping) and we do not want to take performance hit by always mapping UC_MINUS. This will be the case for /dev/mem mappings used to map BIOS area or ACPI region which are WB'able. In this case, as long as MTRR is not WB, PAT will request UC_MINUS for such mappings. (2) user/API requests WB mapping while in reality MTRR may have UC or WC. In this case, PAT can map as WB (without checking MTRR) and still effective type will be UC or WC. But, a subsequent request to map same region as UC or WC may fail, as the region will get trackked as WB in PAT list. Looking at MTRR hint helps us to track based on effective type rather than what user requested. Again, here mtrr_lookup is only used as hint and we fallback to WB mapping (as requested by user) as default. In both cases, after using the mtrr hint, we still go through the memtype list to make sure there are no inconsistencies among multiple users. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Rufus & Azrael <rufus-azrael@numericable.fr> Signed-off-by: Ingo Molnar <mingo@elte.hu> 04 June 2008, 11:11:47 UTC
5116310 Kevin Winchester 30 May 2008, 00:14:35 UTC x86: fix pointer type warning in arch/x86/mm/init_64.c:early_memtest Changed the call to find_e820_area_size to pass u64 instead of unsigned long. Signed-off-by: Kevin Winchester <kjwinchester@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> 04 June 2008, 11:11:47 UTC
2884f11 Hugh Dickins 28 May 2008, 18:36:07 UTC x86: fix bad pmd ffff810000207xxx(9090909090909090) OGAWA Hirofumi and Fede have reported rare pmd_ERROR messages: mm/memory.c:127: bad pmd ffff810000207xxx(9090909090909090). Initialization's cleanup_highmap was leaving alignment filler behind in the pmd for MODULES_VADDR: when vmalloc's guard page would occupy a new page table, it's not allocated, and then module unload's vfree hits the bad 9090 pmd entry left over. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> 04 June 2008, 11:11:47 UTC
226e9a9 Ingo Molnar 27 May 2008, 07:56:49 UTC x86: ioremap fix failing nesting check Mika Kukkonen noticed that the nesting check in early_iounmap() is not actually done. Reported-by: Mika Kukkonen <mikukkon@srv1-m700-lanp.koti> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: torvalds@linux-foundation.org Cc: arjan@linux.intel.com Cc: mikukkon@iki.fi Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 04 June 2008, 11:11:47 UTC
e8a496a Suresh Siddha 23 May 2008, 23:26:37 UTC x86: fix broken math-emu with lazy allocation of fpu area Fix the math emulation that got broken with the recent lazy allocation of FPU area. init_fpu() need to be added for the math-emulation path aswell for the FPU area allocation. math emulation enabled kernel booted fine with this, in the presence of "no387 nofxsr" boot param. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: hpa@zytor.com Cc: mingo@elte.hu Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 04 June 2008, 11:11:46 UTC
5c1ea08 Steven Rostedt 25 May 2008, 15:13:32 UTC x86: enable preemption in delay The RT team has been searching for a nasty latency. This latency shows up out of the blue and has been seen to be as big as 5ms! Using ftrace I found the cause of the latency. pcscd-2995 3dNh1 52360300us : irq_exit (smp_apic_timer_interrupt) pcscd-2995 3dN.2 52360301us : idle_cpu (irq_exit) pcscd-2995 3dN.2 52360301us : rcu_irq_exit (irq_exit) pcscd-2995 3dN.1 52360771us : smp_apic_timer_interrupt (apic_timer_interrupt ) pcscd-2995 3dN.1 52360771us : exit_idle (smp_apic_timer_interrupt) Here's an example of a 400 us latency. pcscd took a timer interrupt and returned with "need resched" enabled, but did not reschedule until after the next interrupt came in at 52360771us 400us later! At first I thought we somehow missed a preemption check in entry.S. But I also noticed that this always seemed to happen during a __delay call. pcscd-2995 3dN.2 52360836us : rcu_irq_exit (irq_exit) pcscd-2995 3.N.. 52361265us : preempt_schedule (__delay) Looking at the x86 delay, I found my problem. In git commit 35d5d08a085c56f153458c3f5d8ce24123617faf, Andrew Morton placed preempt_disable around the entire delay due to TSC's not working nicely on SMP. Unfortunately for those that care about latencies this is devastating! Especially when we have callers to mdelay(8). Here I enable preemption during the loop and account for anytime the task migrates to a new CPU. The delay asked for may be extended a bit by the migration, but delay only guarantees that it will delay for that minimum time. Delaying longer should not be an issue. [ Thanks to Thomas Gleixner for spotting that cpu wasn't updated, and to place the rep_nop between preempt_enabled/disable. ] Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: akpm@osdl.org Cc: Clark Williams <clark.williams@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Gregory Haskins <ghaskins@novell.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <andi-suse@firstfloor.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 04 June 2008, 11:11:46 UTC
deef325 Ingo Molnar 12 May 2008, 13:44:38 UTC x86: disable preemption in native_smp_prepare_cpus Priit Laes reported the following warning: Call Trace: [<ffffffff8022f1e1>] warn_on_slowpath+0x51/0x63 [<ffffffff80282e48>] sys_ioctl+0x2d/0x5d [<ffffffff805185ff>] _spin_lock+0xe/0x24 [<ffffffff80227459>] task_rq_lock+0x3d/0x73 [<ffffffff805133c3>] set_cpu_sibling_map+0x336/0x350 [<ffffffff8021c1b8>] read_apic_id+0x30/0x62 [<ffffffff806d921d>] verify_local_APIC+0x90/0x138 [<ffffffff806d84b5>] native_smp_prepare_cpus+0x1f9/0x305 [<ffffffff806ce7b1>] kernel_init+0x59/0x2d9 [<ffffffff80518a26>] _spin_unlock_irq+0x11/0x2b [<ffffffff8020bf48>] child_rip+0xa/0x12 [<ffffffff806ce758>] kernel_init+0x0/0x2d9 [<ffffffff8020bf3e>] child_rip+0x0/0x12 fix this by generally disabling preemption in native_smp_prepare_cpus(). Reported-and-bisected-by: Priit Laes <plaes@plaes.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 04 June 2008, 11:11:46 UTC
fb3bbd6 Yinghai Lu 23 May 2008, 01:22:30 UTC x86: fix APIC warning on 32bit v2 for http://bugzilla.kernel.org/show_bug.cgi?id=10613 BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor) v2: fix 64 bit compilation Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Gabriel C <nix.or.die@googlemail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> 04 June 2008, 11:11:46 UTC
a57c1ba Alan Cox 29 May 2008, 21:10:58 UTC libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl - Make ata_sff_altstatus private so nobody uses it by mistake - Drop the 400nS delay from it Add ata_sff_irq_status - encapsulates the IRQ check logic This function keeps the existing behaviour for altstatus using devices. I actually suspect the logic was wrong before the changes but -rc isn't the time to play with that ata_sff_sync - ensure writes hit the device Really we want an io* operation for 'is posted' eg ioisposted(ioaddr) so that we can fix the nasty delay this causes on most systems. - ata_sff_pause - 400nS delay Ensure the command hit the device and delay 400nS - ata_sff_dma_pause Ensure the I/O hit the device and enforce an HDMA1:0 transition delay. Requires altstatus register exists, BUG if not so we don't risk corruption in MWDMA modes. (UDMA the checksum will save your backside in theory) The only other complication then is devices with their own handlers. rb532 can use dma_pause but scc needs to access its own altstatus register for internal errata workarounds so directly call the drivers own altstatus function. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 04 June 2008, 10:40:41 UTC
4f0ebe3 Tejun Heo 19 May 2008, 17:17:50 UTC libata: kill unused constants Kill a few unused constants. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 04 June 2008, 10:29:14 UTC
ba069e3 Mark Lord 31 May 2008, 20:46:34 UTC sata_mv: PHY_MODE4 cleanups The handling for PHY_MODE4 was originally just cloned from the Marvell proprietary driver (with their blessing). But we can do better than that. Tidy things up with some judicious mask definitions, to improve maintainability. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 04 June 2008, 10:29:11 UTC
e1fefea Colin Ian King 03 June 2008, 16:59:02 UTC [libata] ata_piix: more acer short cable quirks Add ICH6 on ACER Aspire 1694WLMi to list of laptops that use short cables rather than 80 wire OriginalAuthor: Tiago Sousa OriginalLocation: http://launchpadlibrarian.net/11627664/new.ich_laptop.short.cables.diff Bug: #187121 Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 04 June 2008, 10:29:06 UTC
664d080 Holger Macht 03 June 2008, 18:27:59 UTC [libata] ACPI: Properly handle bay devices in dock stations * Differentiate between bay devices in dock stations and others: - When an ACPI_NOTIFY_EJECT_REQUEST appears, just signal uevent to userspace (that is when the optional eject button on a bay device is pressed/pulled) giving the possibility to unmount file systems and to clean up. Also, only send uevent in case we get an EJECT_REQUEST without doing anything else. In other cases, you'll get an add/remove event because libata attaches/detaches the device. - In case of a dock event, which in turn signals an ACPI_NOTIFY_EJECT_REQUEST, immediately detach the device, because it may already have been gone * In case of an ACPI_NOTIFY_DEVICE/BUS_CHECK, evaluate _STA to check if the device has been plugged or unplugged. If plugged, hotplug it, if unplugged, just signal event to userspace (initial patch by Matthew Garrett <mjg59@srcf.ucam.org>) * Call ACPI _EJ0 for detached devices Signed-off-by: Holger Macht <hmacht@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 04 June 2008, 10:28:50 UTC
378bd6a Tony Vroon 04 June 2008, 10:08:30 UTC [ALSA] hda - COMPAL IFL90/JFL-92 laptop quirk Use quirk table to assign ALC268_TOSHIBA to COMPAL IFL90/JFL-92 laptops. No analog output on autoprobe. Signed-off-by: Tony Vroon <tony@linx.net> Tested-by: Guri <gurashka@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> 04 June 2008, 10:12:35 UTC
64e9159 Alan Cox 03 June 2008, 14:18:54 UTC serial_core: uart_set_ldisc infrastructure The tty layer provides a callback that is used when the line discipline is changed. Some hardware uses this to configure hardware specific features such as IrDA mode on serial ports. Unfortunately the serial layer does not provide this feature or pass it down to drivers. Blackfin used to hack around this by rewriting the tty ops, but those are now properly shared and const so the hack fails. Instead provide the proper operations. This change plus a follow up from the Blackfin guys is needed to avoid blackfin losing features in this release. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 June 2008, 15:20:17 UTC
07bc76d Takashi Iwai 03 June 2008, 12:46:34 UTC [ALSA] hda - Fix resume of auto-config mode with Realtek codecs The auto-config mode of Realtek ALC codecs has a bug since 2.6.25 that it cannot resume properly. The problem was the wrong assignment of init_hook that overrides the whole initialization. Relevant bug reports: http://bugzilla.kernel.org/show_bug.cgi?id=10662 https://bugzilla.novell.com/show_bug.cgi?id=385473 Signed-off-by: Takashi Iwai <tiwai@suse.de> 03 June 2008, 12:56:53 UTC
39eb41e Paul Mundt 03 June 2008, 11:30:10 UTC sh: Add defconfig for RSK7203. RSK7203 is supportable through the generic machvec, so we add a defconfig for those bits. This gets updated with more complete board support later. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 03 June 2008, 11:30:10 UTC
f8cc356 Paul Mundt 03 June 2008, 11:29:55 UTC sh: Update SE7206 defconfig. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 03 June 2008, 11:29:55 UTC
4b34fe1 Bjorn Helgaas 02 June 2008, 22:42:49 UTC PNP: mark resources that conflict with PCI devices "disabled" Both the PNP/PCI conflict detection quirk and the PNP system driver must use the same mechanism to mark resources as disabled. I think it's best to keep the resource and to keep the type bit (IORESOURCE_MEM, etc), so that we match the list from firmware as closely as possible. Fixes this regression from 2.6.25: http://lkml.org/lkml/2008/6/1/82 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Tested-by: Avuton Olrich <avuton@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2008, 22:59:06 UTC
c3b25b3 Linus Torvalds 02 June 2008, 22:30:44 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] cts: Init SG tables 02 June 2008, 22:30:44 UTC
28928b2 Linus Torvalds 02 June 2008, 22:28:45 UTC Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: [PATCH 3/3] ocfs2/net: Silence build warnings [PATCH 2/3] ocfs2/dlm: Silence build warnings [PATCH 1/3] ocfs2/net: Silence build warnings ocfs2: Rename 'user_stack' plugin structure to 'ocfs2_user_plugin' 02 June 2008, 22:28:45 UTC
63e1462 Anton Vorontsov 01 June 2008, 09:49:32 UTC mmc_spi: mmc_spi.h should include linux/interrupts.h Since mmc_spi.h uses irqreturn_t type, it should include appropriate header, otherwise build will break if users didn't include it (some of them do not use interrupts). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 02 June 2008, 22:27:10 UTC
b09916e Linus Torvalds 02 June 2008, 22:26:02 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes * git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: fix $(src) assignmnet with external modules 02 June 2008, 22:26:02 UTC
00e98a9 Linus Torvalds 02 June 2008, 22:25:27 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: 8250 Serial Driver: revert extra IRQ flag definition patch Blackfin arch: update anomaly headers from toolchain trunk Blackfin arch: Remove bad and usless code Blackfin arch: Fix bug - set corret SSEL and IRQ to enable AD7877 on BF527 Blackfin arch: Fix typo. it should be _outsw_8 Blackfin arch: Cleanup no functional changes 02 June 2008, 22:25:27 UTC
f365ad5 Linus Torvalds 02 June 2008, 22:25:03 UTC Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix DMA nodes in the MPC8610 HPCD device tree [POWERPC] Export empty_zero_page and copy_page in arch/ppc [POWERPC] Add "memory" clobber to MMIO accessors [POWERPC] pasemi: update pasemi_defconfig, enable electra_cf electra_cf: Add MODULE_DEVICE_TABLE() 02 June 2008, 22:25:03 UTC
c4913c7 Alexey Dobriyan 02 June 2008, 05:46:51 UTC [CRYPTO] cts: Init SG tables Steps to reproduce: modprobe tcrypt # with CONFIG_DEBUG_SG=y testing cts(cbc(aes)) encryption test 1 (128 bit key): ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:65! invalid opcode: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Modules linked in: tea xts twofish twofish_common tcrypt(+) [maaaany] Pid: 16151, comm: modprobe Not tainted 2.6.26-rc4-fat #7 RIP: 0010:[<ffffffffa0bf032e>] [<ffffffffa0bf032e>] :cts:cts_cbc_encrypt+0x151/0x355 RSP: 0018:ffff81016f497a88 EFLAGS: 00010286 RAX: ffffe20009535d58 RBX: ffff81016f497af0 RCX: 0000000087654321 RDX: ffff8100010d4f28 RSI: ffff81016f497ee8 RDI: ffff81016f497ac0 RBP: ffff81016f497c38 R08: 0000000000000000 R09: 0000000000000011 R10: ffffffff00000008 R11: ffff8100010d4f28 R12: ffff81016f497ac0 R13: ffff81016f497b30 R14: 0000000000000010 R15: 0000000000000010 FS: 00007fac6fa276f0(0000) GS:ffffffff8060e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f12ca7cc000 CR3: 000000016f441000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 Process modprobe (pid: 16151, threadinfo ffff81016f496000, task ffff8101755b4ae0) Stack: 0000000000000001 ffff81016f496000 ffffffff80719f78 0000000000000001 0000000000000001 ffffffff8020c87c ffff81016f99c918 20646c756f772049 65687420656b696c 0000000000000020 0000000000000000 0000000033341102 Call Trace: [<ffffffff8020c87c>] ? restore_args+0x0/0x30 [<ffffffffa04aa311>] ? :aes_generic:crypto_aes_expand_key+0x311/0x369 [<ffffffff802ab453>] ? check_object+0x15a/0x213 [<ffffffff802aad22>] ? init_object+0x6e/0x76 [<ffffffff802ac3ae>] ? __slab_free+0xfc/0x371 [<ffffffffa0bf05ed>] :cts:crypto_cts_encrypt+0xbb/0xca [<ffffffffa07108de>] ? :crypto_blkcipher:setkey+0xc7/0xec [<ffffffffa07110b8>] :crypto_blkcipher:async_encrypt+0x38/0x3a [<ffffffffa2ce9341>] :tcrypt:test_cipher+0x261/0x7c6 [<ffffffffa2cfd9df>] :tcrypt:tcrypt_mod_init+0x9df/0x1b30 [<ffffffff80261e35>] sys_init_module+0x9e/0x1b2 [<ffffffff8020c15a>] system_call_after_swapgs+0x8a/0x8f Code: 45 c0 e8 aa 24 63 df 48 c1 e8 0c 48 b9 00 00 00 00 00 e2 ff ff 48 8b 55 88 48 6b c0 68 48 01 c8 b9 21 43 65 87 48 39 4d 80 74 04 <0f> 0b eb fe f6 c2 01 74 04 0f 0b eb fe 83 e2 03 4c 89 ef 44 89 RIP [<ffffffffa0bf032e>] :cts:cts_cbc_encrypt+0x151/0x355 RSP <ffff81016f497a88> ---[ end trace e8bahiarjand37fd ]--- Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> 02 June 2008, 05:46:51 UTC
1f8404e Paul Mundt 02 June 2008, 04:48:59 UTC sh: Disable 4KSTACKS on nommu. 4k stacks on nommu ends up blowing up with all sorts of interesting slab corruption. Disable this by default unless BROKEN is also enabled. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 02 June 2008, 04:48:59 UTC
d02d6be Paul Mundt 02 June 2008, 03:40:14 UTC sh: fix miscompilation of ip_fast_csum with gcc >= 4.3 As noted by Matthew Wilcox: Kyle McMartin just tracked down a bug on parisc to a missing "memory" clobber in the inline assembly implementation of ip_fast_csum. The FRV, SH and Xtensa ports are also missing a memory clobber, so I thought it would be polite to let you know. The bug manifests as dropped network packets (obviously they have the wrong checksum). It started appearing for parisc with GCC 4.3. The GCC manual says: If your assembler instructions access memory in an unpredictable fashion, add `memory' to the list of clobbered registers. This will cause GCC to not keep memory values cached in registers across the assembler instruction and not optimize stores or loads to that memory. I see that FRV has a 400 byte memory output which may prevent this problem from appearing, but SH and Xtensa have nothing to prevent this bug. Hope this saves you a few days of debugging. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 02 June 2008, 03:40:14 UTC
1f9d294 Harvey Harrison 28 May 2008, 23:38:17 UTC sh: module.c use kernel unaligned helpers Replace the COPY_UNALIGNED_WORD helper. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 02 June 2008, 03:30:00 UTC
2beb0e2 Adrian Bunk 29 May 2008, 22:04:49 UTC sh/kernel/cpu/irq/intc-sh5.c build fix This patch fixes the following build error caused by commit a1dc4b59fa4af97ae68ee214d4d72bbd7c7ec1dc (sh: intc_sh5 depends on cayman board for IRQ priority table.): <-- snip --> ... CC arch/sh/kernel/cpu/irq/intc-sh5.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/kernel/cpu/irq/intc-sh5.c: In function 'plat_irq_setup': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/kernel/cpu/irq/intc-sh5.c:257: error: expected declaration or statement at end of input make[4]: *** [arch/sh/kernel/cpu/irq/intc-sh5.o] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 02 June 2008, 03:29:07 UTC
96d97f2 Sam Ravnborg 31 May 2008, 20:28:40 UTC kbuild: fix $(src) assignmnet with external modules When we introduced support for KBUILD_EXTRA_SYMBOLS we started to include the externam module's kbuild file when doing the final modpost step. As external modules often do: ccflags-y := -I$(src) We had problems because $(src) was unassinged and gcc then used the next parameter for -I resulting in strange build failures. Fix is to assign $(src) and $(obj) when building external modules. This fixes: http://bugzilla.kernel.org/show_bug.cgi?id=10798 Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tvrtko <tvrtko.ursulin@sophos.com> Cc: Andrea Arcangeli <andrea@qumranet.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> 31 May 2008, 20:28:40 UTC
a4ed1e4 Bryan Wu 31 May 2008, 08:10:04 UTC 8250 Serial Driver: revert extra IRQ flag definition patch As Russell pointed out, original patch will break some serial configurations because of the dependency of the <asm/serial.h> header file. Revert it first and try to find out other solution later Cc: Javier Herrero <jherrero@hvsistemas.es> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Signed-off-by: Bryan Wu <cooloney@kernel.org> 31 May 2008, 08:10:04 UTC
a70ce07 Mike Frysinger 31 May 2008, 07:47:17 UTC Blackfin arch: update anomaly headers from toolchain trunk Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 31 May 2008, 07:47:17 UTC
b06dcee Michael Hennerich 31 May 2008, 07:35:40 UTC Blackfin arch: Remove bad and usless code Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> 31 May 2008, 07:35:40 UTC
2eb74ae Bryan Wu 31 May 2008, 07:17:25 UTC Blackfin arch: Fix bug - set corret SSEL and IRQ to enable AD7877 on BF527 AD7877 use SSEL_2 (P9.9) and IRQ_PF8 (P9.14) on BF527 - populating JP3 to enable STAMP - disable SW11.2 to disconnect SSEL_2/PF12 from Rotary NAND - disable SW18.1 to disconnect SSEL_2 from MAX1233 touchscreen chip Signed-off-by: Bryan Wu <cooloney@kernel.org> 31 May 2008, 07:17:25 UTC
9c8b28c Timur Tabi 30 May 2008, 22:12:05 UTC [POWERPC] Fix DMA nodes in the MPC8610 HPCD device tree The node for DMA2 in the MPC8610 HPCD device tree has the wrong compatible properties. This breaks the DMA driver and the sound driver. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 May 2008, 07:08:29 UTC
6907fa2 Tony Breeds 28 May 2008, 00:52:19 UTC [POWERPC] Export empty_zero_page and copy_page in arch/ppc Currently ext4 and fuse fail to link if modular: ERROR: "copy_page" [fs/fuse/fuse.ko] undefined! ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined! make[3]: *** [__modpost] Error 1 make[2]: *** [modules] Error 2 make[1]: *** [sub-make] Error 2 While arch ppc exists it may as well compile, so this exports those symbols (which are already exported in arch/powerpc). Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 May 2008, 07:08:28 UTC
cfab3bd Benjamin Herrenschmidt 28 May 2008, 00:18:17 UTC [POWERPC] Add "memory" clobber to MMIO accessors Gcc might re-order MMIO accessors vs. surrounding consistent memory accesses, which is a "bad thing", and could break drivers. This fixes it by adding a "memory" clobber to the MMIO accessors, which should prevent gcc from doing that reordering. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org> 31 May 2008, 07:08:28 UTC
61ac7bf Linus Torvalds 30 May 2008, 22:39:05 UTC Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.c [libata] sata_fsl: Fix broken driver, add port multiplier (PMP) support libata: SRST can't be trusted on PMP sil3726 libata: fix libata-scsi kernel-doc notation ata: Convert to static DEFINE_SPINLOCK(lock) ata_piix: fix macbook ich8m problems sata_mv: implement SoC guideline SATA_S11 sata_mv: workaround for 60x1 errata sata13 sata_mv: nuke unreleased GenIIe revisions sata_mv: PHY_MODEx errata fixes sata_mv: move SOC_FLAG to hpriv 30 May 2008, 22:39:05 UTC
0f475b2 Sunil Mushran 13 May 2008, 01:31:37 UTC [PATCH 3/3] ocfs2/net: Silence build warnings This patch silences the build warnings concerning o2net_init_nst() and friends when building without CONFIG_DEBUG_FS enabled. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com> 30 May 2008, 22:15:12 UTC
959040c Sunil Mushran 13 May 2008, 01:31:36 UTC [PATCH 2/3] ocfs2/dlm: Silence build warnings This patch silences the build warnings concerning dlm_debug_init() and friends when building without CONFIG_DEBUG_FS enabled. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com> 30 May 2008, 22:15:10 UTC
271d772 Sunil Mushran 13 May 2008, 01:31:35 UTC [PATCH 1/3] ocfs2/net: Silence build warnings This patch silences the build warnings concerning o2net_debugfs_init() and friends when building without CONFIG_DEBUG_FS enabled. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com> 30 May 2008, 22:15:04 UTC
a12630b Joel Becker 10 May 2008, 01:49:29 UTC ocfs2: Rename 'user_stack' plugin structure to 'ocfs2_user_plugin' The static structure describing the userspace cluster plugin for ocfs2 was named 'user_stack', which is a real pain when people are grep(1)ing the tree for the program stack object 'user_stack'. Change the name to something distinct and namespaced. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com> 30 May 2008, 22:14:08 UTC
14d03fd Linus Torvalds 30 May 2008, 21:02:21 UTC Mark 'scripts/decodecode' executable .. because it is. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 May 2008, 21:02:21 UTC
28d7647 Andrew Vasquez 19 May 2008, 21:25:41 UTC [SCSI] qla2xxx: Update version number to 8.02.01-k4. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 30 May 2008, 17:21:12 UTC
08b95a1 Seokmann Ju 19 May 2008, 21:25:40 UTC [SCSI] qla2xxx: Correct handling of AENs postings for vports. Initialize all proper structure members in order to support work-list vport processing. This code also properly acquires the correct (physical hardware_lock) lock during work submission. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 30 May 2008, 17:20:57 UTC
3c39740 Seokmann Ju 19 May 2008, 21:25:39 UTC [SCSI] qla2xxx: Revert "qla2xxx: Use proper HA during asynchronous event handling." This reverts commit bd2a1846b2313e32d0270151a31a6b8335384a20. The original (prior to the reverted commit) code was correct. Additionally, the vp_idx should be checked during MBA_PORT_UPDATE in order for proper handling to take place for a given vport. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> 30 May 2008, 17:20:43 UTC
ab8cd81 Linus Torvalds 30 May 2008, 17:20:03 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: notify on empty virtio: force callback on empty. virtio_blk: fix endianess annotations virtio_config: fix len calculation of config elements virtio_net: another race with virtio_net and enable_cb virtio: An entropy device, as suggested by hpa. virtio_blk: allow read-only disks lguest: fix ugly <NULL> in /proc/interrupts virtio: set device index in common code. virtio: virtio_pci should not set bus_id. virtio: bus_id for devices should contain 'virtio' Fix crash in virtio_blk during modprobe ; rmmod ; modprobe lguest: use ioremap_cache, not ioremap 30 May 2008, 17:20:03 UTC
f8356ed Linus Torvalds 30 May 2008, 17:18:02 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: fix rpadlpar pci hotplug driver sysfs usage 30 May 2008, 17:18:02 UTC
7536d7b Linus Torvalds 30 May 2008, 17:17:19 UTC Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: rename SW_RADIO to SW_RFKILL_ALL Input: gtco - fix double kfree in error handling path Input: pxa27x_keypad - miscellaneous fixes Input: atkbd - mark keyboard as disabled when suspending/unloading Input: apanel - remove duplicate include Input: wm9713 - support five wire panels Input: wm97xx-core - fix race on PHY init Input: wm97xx-core - fix driver name Input: wm97xx-core - report a phys for WM97xx touchscreens Input: i8042 - make sure Dritek quirk is invoked at resume Input: i8042 - add Dritek quirk for Acer TravelMate 660 30 May 2008, 17:17:19 UTC
57f50ca Ingo Molnar 30 May 2008, 15:02:50 UTC drivers/watchdog/geodewdt.c: build fix * Wim Van Sebroeck <wim@iguana.be> wrote: > Author: Jordan Crouse <jordan.crouse@amd.com> > Date: Mon Jan 21 10:07:00 2008 -0700 > > [WATCHDOG] Add a watchdog driver based on the CS5535/CS5536 MFGPT timers -tip testing found the following build failure on latest -git: drivers/watchdog/geodewdt.c: In function 'geodewdt_probe': drivers/watchdog/geodewdt.c:225: error: too many arguments to function 'geode_mfgpt_alloc_timer' make[1]: *** [drivers/watchdog/geodewdt.o] Error 1 make: *** [drivers/watchdog/geodewdt.o] Error 2 with this config: http://redhat.com/~mingo/misc/config-Fri_May_30_15_19_52_CEST_2008.bad find the fix below. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 May 2008, 17:16:58 UTC
a9b841e Benjamin Herrenschmidt 30 May 2008, 03:39:12 UTC PCI: fix rpadlpar pci hotplug driver sysfs usage When Greg "fixed" the sysfs usage of that driver a while back, he seem to have introduced a bug where the quotes are added around the name of our specific sysfs files, thus breaking the user space tool. This fixes it. Tested DLPAR operations on a POWER6 machine successfully. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> 30 May 2008, 16:50:46 UTC
3072c37 peerchen 19 May 2008, 06:44:57 UTC ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.c Change the partial Device IDs of nvidia MCP7B AHCI controller in ahci.c, as the actual PCI IDs deployed in the field differed from the forecasted ones preemptively placed in the driver. Signed-off-by: Peer Chen <peerchen@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:40:28 UTC
034d8e8 Ashish Kalra 20 May 2008, 05:19:45 UTC [libata] sata_fsl: Fix broken driver, add port multiplier (PMP) support The following commit (4c9bf4e799ce06a7378f1196587084802a414c03): libata: replace tf_read with qc_fill_rtf for non-SFF drivers Broke the sata_fsl.c driver in 2.6.26-rc. I know the following patch fixes the issue, it clearly also adds port multipler support. The current 2.6.26-rc driver is broken. On boot with debug enabled we get something like (w/o this patch): spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 .. continues for ever. This change fixes this as a side effect of adding port multiplier support. Signed-off-by: Ashish Kalra <ashish.kalra@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:39:44 UTC
19ef9d5 Tejun Heo 21 May 2008, 05:11:24 UTC libata: SRST can't be trusted on PMP sil3726 As in sil4726, SRST can't be trusted on sil3726 causing detection problems under certain configuraitons. I thought it was from the Config Disk device but apparently not. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:56 UTC
ec2a20e Randy Dunlap 30 April 2008, 19:57:00 UTC libata: fix libata-scsi kernel-doc notation Fix libata-scsi kernel-doc notation: Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1659): No description found for parameter 'cmd' Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1971): No description found for parameter 'buf' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:50 UTC
2da6765 Pradeep Singh Rautela 29 May 2008, 17:58:14 UTC ata: Convert to static DEFINE_SPINLOCK(lock) Replace deprecated static spinlock_t instance to static DEFINE_SPINLOCK(lock). Signed-off-by: Pradeep Singh <rautelap@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:43 UTC
23cf296 Tejun Heo 29 May 2008, 13:04:22 UTC ata_piix: fix macbook ich8m problems ICH8M on macbooks are peculiar in that some of them lock up when the second port is enabled, some return bogus values on SIDPR access while yet others hang on SIDPR access. Also, the ich8m_apple_sata entry was wrongly added below generic ich8m entry making it virtually useless. This patch works around macbook ich8m problems by * moving ich8m_apple_sata entry above generic ich8m entry * dropping PIIX_FLAG_SIDPR from ich8m_apple_sata * adding subsystem 106b:00a1 as ich8m_apple_sata Reported and tested by MATSUBAYASHI. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: MATSUBAYASHI 'Shaolin' Kohji <shaolin@rhythmaning.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:29 UTC
0388a8c Mark Lord 28 May 2008, 17:41:52 UTC sata_mv: implement SoC guideline SATA_S11 The 5182 System-On-Chip (SOC) variant wants certain lower bits to be cleared on any write to the PHY_MODE3 register. If/when support is added for other SOC variants, we'll need some way to uniquely identify the 5182, and not perform this workaround for the others. But for now, it is the only SOC variant we support here. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:26 UTC
b406c7a Mark Lord 28 May 2008, 16:01:12 UTC sata_mv: workaround for 60x1 errata sata13 The "B2" variant of the 6041/6081 (genII) chips requires that the PHY_MODE3 register be rewritten after any write to PHY_MODE4. This fixes a regression introduced by an earlier patch. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:24 UTC
5cf73bf Mark Lord 27 May 2008, 21:58:56 UTC sata_mv: nuke unreleased GenIIe revisions The only public release of the 6042/7042 chips was/is revision "B0". Remove code that attempted to deal with earlier, non-released revs. This matches the logic of the current Marvell "proprietary" driver. Also, bump up the sata_mv version number, to reflect this batch of erratas. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:23 UTC
8c30a8b Mark Lord 27 May 2008, 21:56:31 UTC sata_mv: PHY_MODEx errata fixes Fix and update the errata handling for the PHY_MODEx registers. This improves receiver noise tolerance, among other things. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:21 UTC
1f39847 Mark Lord 27 May 2008, 21:54:48 UTC sata_mv: move SOC_FLAG to hpriv Convert the System-on-Chip flag from a host flag to an hpriv flag, for better consistency with other chip-rev flags, and for easier use in errata fixes etc. Also change the related "HAS_PCI()" into "!IS_SOC()" for better consistency of naming/use (everything else SOC-related already uses "SOC"). There are no functionality changes in this patch. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> 30 May 2008, 16:37:20 UTC
79d0643 Takashi Iwai 30 May 2008, 14:54:49 UTC [ALSA] hda - Fix model for LG LS75 laptop Set the proper model for LG LS75 with CM9880 codec. See ALSA bug#2105: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2105 Signed-off-by: Takashi Iwai <tiwai@suse.de> 30 May 2008, 14:56:00 UTC
1beee8d Linus Torvalds 30 May 2008, 14:45:20 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits) llc: Fix double accounting of received packets netfilter: nf_conntrack_expect: fix error path unwind in nf_conntrack_expect_init() bluetooth: fix locking bug in the rfcomm socket cleanup handling mac80211: fix alignment issue with compare_ether_addr() mac80211: Fix for NULL pointer dereference in sta_info_get() mac80211: fix a typo in ieee80211_handle_filtered_frame comment rndis_wlan: add missing range check for power_output modparam iwlwifi: fix rate scale TLC column selection bug iwlwifi: fix exit from stay_in_table state rndis_wlan: Make connections to TKIP PSK networks work mac80211 : Fixes the status message for iwconfig rt2x00: Use atomic interface iteration in irq context rt2x00: Reset antenna RSSI after switch rt2x00: Don't count retries as failure rt2x00: Fix memleak in tx() path mac80211: reorder channel and freq reporting in wext scan report b43: Fix controller restart crash mac80211: fix ieee80211_rx_bss_put/get imbalance net/mac80211: always true conditionals b43: Upload both beacon templates on initial load ... 30 May 2008, 14:45:20 UTC
9db8ee3 Linus Torvalds 30 May 2008, 14:44:19 UTC Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] Update default configuration. [S390] disassembler: fix idte instruction format. [S390] tape: fix race with stack local wait_queue_head_t. [S390] 3270: fix race with stack local wait_queue_head_t. [S390] dasd: use a generic wait_queue for sleep_on [S390] sclp_vt220: fix scheduling while atomic bug. [S390] showmem: Only walk spanned pages. [S390] appldata: prevent cpu hotplug when walking cpu_online_map. [S390] Fix section mismatch warnings. [S390] s390 types: make dma_addr_t 64 bit capable [S390] tape: Fix race condition in tape block device driver [S390] fix sparsemem related compile error with allnoconfig on s390 30 May 2008, 14:44:19 UTC
e3aa51f Harvey Harrison 30 May 2008, 00:51:57 UTC acpi: fix sparse const errors In this case we want a constant pointer to constant chars: drivers/misc/thinkpad_acpi.c:3824:19: error: Just how const do you want this type to be? Like the error says. drivers/misc/thinkpad_acpi.c:3863:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3864:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3865:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3866:19: error: Just how const do you want this type to be? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 30 May 2008, 14:43:24 UTC
5adad01 Henrique de Moraes Holschuh 30 May 2008, 14:40:46 UTC Input: rename SW_RADIO to SW_RFKILL_ALL The SW_RADIO code for EV_SW events has a name that is not descriptive enough of its intended function, and could induce someone to think KEY_RADIO is its EV_KEY counterpart, which is false. Rename it to SW_RFKILL_ALL, and document what this event is for. Keep the old name around, to avoid userspace ABI breaks. The SW_RFKILL_ALL event is meant to be used by rfkill master switches. It is not bound to a particular radio switch type, and usually applies to all types. It is semantically tied to master rfkill switches that enable or disable every radio in a system. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 30 May 2008, 14:40:46 UTC
501a525 Dmitry Torokhov 30 May 2008, 14:40:28 UTC Input: gtco - fix double kfree in error handling path The code would try to free 'report' twice upon input_register_device() failure. Reported-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 30 May 2008, 14:40:28 UTC
269ef19 Takashi Iwai 30 May 2008, 13:32:15 UTC [ALSA] hda - Fix mic input on HP2133 The mic pins are wrongly assigned on AD1884A mobile model. The mic handling is fixed for the automatic mic selection, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> 30 May 2008, 14:22:10 UTC
e48d6d9 Takashi Iwai 29 May 2008, 06:16:56 UTC [ALSA] ac97 - Fix ASUS A9T laptop output ASUS A9T laptop uses line-out pin as the real front-output while other devices use it as the surround. Signed-off-by: Takashi Iwai <tiwai@suse.de> 30 May 2008, 14:20:42 UTC
3446b9d Arnaldo Carvalho de Melo 30 May 2008, 09:57:29 UTC llc: Fix double accounting of received packets llc_sap_rcv was being preceded by skb_set_owner_r, then calling llc_state_process that calls sock_queue_rcv_skb, that in turn calls skb_set_owner_r again making the space allowed to be used by the socket to be leaked, making the socket to get stuck. Fix it by setting skb->sk at llc_sap_rcv and leave the accounting to be done only at sock_queue_rcv_skb. Reported-by: Dmitry Petukhov <dmgenp@gmail.com> Tested-by: Dmitry Petukhov <dmgenp@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 30 May 2008, 09:57:29 UTC
0066ed5 Martin Schwidefsky 30 May 2008, 08:03:35 UTC [S390] Update default configuration. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:36 UTC
209fb90 Martin Schwidefsky 30 May 2008, 08:03:34 UTC [S390] disassembler: fix idte instruction format. The correct instruction format of idte is "idte r1,r3,r2" with r1 at bit 24, r3 at bit 16 and r2 at bit 28. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:36 UTC
4657fb8 Martin Schwidefsky 30 May 2008, 08:03:33 UTC [S390] tape: fix race with stack local wait_queue_head_t. A wait_event call with a stack local wait_queue_head_t structure that is used to do the wake up for the wait_event is inherently racy. After the wait_event finished the wake_up call might not have completed yet. Replace the stack local wait_queue_head_t in tape_do_io and tape_do_io_interruptible with a per device wait queue. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:36 UTC
54ad641 Martin Schwidefsky 30 May 2008, 08:03:32 UTC [S390] 3270: fix race with stack local wait_queue_head_t. A wait_event call with a stack local wait_queue_head_t structure that is used to do the wake up for the wait_event is inherently racy. After the wait_event finished the wake_up call might not have completed yet. Remove the stack local wait_queue_head_t from raw3270_start_init and use the global raw3270_wait_queue instead. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:35 UTC
c80ee72 Stefan Haberland 30 May 2008, 08:03:31 UTC [S390] dasd: use a generic wait_queue for sleep_on Use a generic wait_queue to prevent the wait_queue in dasd_sleep_on_ functions from being referenced by callback_data while it does not exist any more. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:35 UTC
d4820e4 Heiko Carstens 30 May 2008, 08:03:30 UTC [S390] sclp_vt220: fix scheduling while atomic bug. The driver incorrectly assumed that putchar will only be called from schedulable process context and therefore blocked and waited if no free output buffers where available. Since putchar may also be called from BH context this may lead to deadlocks. To fix this just return the number of characters accepted and let the upper layer handle the rest. The console write function will busy wait (sclp_sync_wait) until a buffer is available again. Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:35 UTC
c1bb7f3 Heiko Carstens 30 May 2008, 08:03:29 UTC [S390] showmem: Only walk spanned pages. Convert show_mem() so its nearly the same as on x86/powerpc. Gives us proper locking and we get also rid of the only use of max_mapnr. Also the number of pages was contained in an int which might not be sufficient not too far in the future. Cc: Johannes Weiner <hannes@saeurebad.de> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:34 UTC
1760537 Gerald Schaefer 30 May 2008, 08:03:28 UTC [S390] appldata: prevent cpu hotplug when walking cpu_online_map. Use get_online_cpus() to prevent cpu hotplug in situations where for_each_online_cpu() is called. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:34 UTC
67060d9 Heiko Carstens 30 May 2008, 08:03:27 UTC [S390] Fix section mismatch warnings. This fixes the last remaining section mismatch warnings in s390 architecture code. It reveals also a real bug introduced by... me with git commit 2069e978d5a6e7b45d58027e3de7f879b8c5e488 ("[S390] sparsemem vmemmap: initialize memmap.") Calling the generic vmemmap_alloc_block() function to get initialized memory is a nice idea, however that function is __meminit annotated and therefore the function might be gone if we try to call it later. This can happen if a DCSS segment gets added. So basically revert the patch and clear the memmap explicitly to fix the original bug. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> 30 May 2008, 08:03:34 UTC
back to top