Skip to main content

Browse the archive

https://github.com/torvalds/linux
23 October 2021, 00:29:24 UTC
sort by:
Revision Author Date Message Commit Date
fb120c0 Eric Dumazet 17 November 2011, 04:40:20 UTC ping: dont increment ICMP_MIB_INERRORS ping module incorrectly increments ICMP_MIB_INERRORS if feeded with a frame not belonging to its own sockets. RFC 2011 states that ICMP_MIB_INERRORS should count "the number of ICMP messages which the entiry received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.)." Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Flavio Leitner <fbl@redhat.com> Acked-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 November 2011, 19:38:59 UTC
282edce stephen hemminger 17 November 2011, 14:37:35 UTC sky2: fix hang in napi_disable If IRQ was never initialized, then calling napi_disable() would hang. Add more bookkeeping to track whether IRQ was ever initialized. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 November 2011, 02:43:57 UTC
738a849 stephen hemminger 17 November 2011, 14:37:23 UTC sky2: enforce minimum ring size The hardware has a restriction that the minimum ring size possible is 128. The number of elements used is controlled by tx_pending and the overall number of elements in the ring tx_ring_size, therefore it is okay to limit the number of elements in use to a small value (63) but still provide a bigger ring. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 18 November 2011, 02:43:57 UTC
4a8bb7e Veaceslav Falico 15 November 2011, 06:44:42 UTC bonding: Don't allow mode change via sysfs with slaves present When changing mode via bonding's sysfs, the slaves are not initialized correctly. Forbid to change modes with slaves present to ensure that every slave is initialized correctly via bond_enslave(). Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Acked-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net> 18 November 2011, 00:31:54 UTC
596a1b7 David S. Miller 17 November 2011, 22:31:49 UTC Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 17 November 2011, 22:31:49 UTC
38ff1ed Rémi Denis-Courmont 17 November 2011, 02:58:55 UTC f_phonet: fix page offset of first received fragment We pull one byte (the MAC header) from the first fragment before the fragment is actually appended. So the socket buffer length is 1, not 0. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2011, 22:03:02 UTC
c4be3c2 John W. Linville 17 November 2011, 19:15:47 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 17 November 2011, 19:15:47 UTC
102463b Francesco Virlinzi 16 November 2011, 21:58:02 UTC stmmac: fix pm functions avoiding sleep on spinlock This patch fixes the pm functions to avoid the system sleeps while a spinlock is taken. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2011, 08:13:42 UTC
989508b Srinivas Kandagatla 16 November 2011, 21:58:01 UTC stmmac: remove spin_lock in stmmac_ioctl. This patch removes un-needed spin_lock in stmmac_ioctl while reading and writing mdio registers. While holding spin_lock the code must be atomic, which is not true in this case as both mdiobus_read and writes have mutex locks. Without this patch reading mdio registers via mii-tool results in below BUG: mii-tool -vvv eth0" Using SIOCGMIIPHY=0x8947 BUG: sleeping function called from invalid context at kernel/mutex.c:287 in_atomic(): 1, irqs_disabled(): 0, pid: 614, name: mii-tool 2 locks held by mii-tool/614: #0: (rtnl_mutex){......}, at: [<c01fd80c>] dev_ioctl+0x550/0x674 #1: (&priv->lock){......}, at: [<c01b34ec>] stmmac_ioctl+0x4c/0x78 [<c002ea14>] (unwind_backtrace+0x0/0xcc) from [<c0272c38>] (mutex_lock_nested+0x24/0x35c) [<c0272c38>] (mutex_lock_nested+0x24/0x35c) from [<c01b237c>] (mdiobus_read+0x44/0x70) [<c01b237c>] (mdiobus_read+0x44/0x70) from [<c01b0c64>] (phy_mii_ioctl+0x4c/0x138) [<c01b0c64>] (phy_mii_ioctl+0x4c/0x138) from [<c01b34fc>] (stmmac_ioctl+0x5c/0x78) [<c01b34fc>] (stmmac_ioctl+0x5c/0x78) from [<c01fcec8>] (dev_ifsioc+0x2a4/0x2c8) [<c01fcec8>] (dev_ifsioc+0x2a4/0x2c8) from [<c01fd81c>] (dev_ioctl+0x560/0x674) [<c01fd81c>] (dev_ioctl+0x560/0x674) from [<c00c36e0>] (vfs_ioctl+0x2c/0x8c) [<c00c36e0>] (vfs_ioctl+0x2c/0x8c) from [<c00c4130>] (do_vfs_ioctl+0x530/0x578) [<c00c4130>] (do_vfs_ioctl+0x530/0x578) from [<c00c41ac>] (sys_ioctl+0x34/0x54) [<c00c41ac>] (sys_ioctl+0x34/0x54) from [<c0028aa0>] (ret_fast_syscall+0x0/0x2c) Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2011, 08:13:42 UTC
19e30c1 Giuseppe CAVALLARO 16 November 2011, 21:58:00 UTC stmmac: parameters auto-tuning through HW cap reg New GMAC devices (newer than the databook 3.50a) have the HW capability register that provides which features are actually supported by the hardware. On old devices many information have to be passed through the platform, for example: enhanced descriptor structure, TX COE etc. These are mandatory to properly configure the driver. This remains still valid because the driver has to support old Synopsys devices but now it's also able to override them using the values from the HW capability register if supported. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2011, 08:13:41 UTC
c5b9b4e Srinivas Kandagatla 16 November 2011, 21:57:59 UTC stmmac: fix advertising 1000Base capabilties for non GMII iface This patch fixes the way to stop the 1000Base advertising capabilties for non GMII interfaces. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2011, 08:13:41 UTC
bbc1754 Francesco Virlinzi 16 November 2011, 21:57:58 UTC stmmac: use mdelay on timeout of sw reset This patch uses an mdelay to manage the timeout on sw reset to be independant of cpu_clk. Signed-off-by: Francesco Virlinzi <francesco.virlinzi@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2011, 08:13:41 UTC
d9fa7c8 stephen hemminger 16 November 2011, 13:43:00 UTC sky2: version 1.30 Update version number. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2011, 01:27:30 UTC
00427a7 stephen hemminger 16 November 2011, 13:42:59 UTC sky2: used fixed RSS key Rather than generating a different RSS key on each boot, just use a predetermined value that will map same flow to same value on every device. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2011, 01:27:28 UTC
b1cb825 stephen hemminger 16 November 2011, 13:42:58 UTC sky2: reduce default Tx ring size The default Tx ring size for the sky2 driver is quite large and could cause excess buffer bloat for many users. The minimum ring size possible and still allow handling the worst case packet on 64bit platforms is 38 which gets rounded up to a power of 2. But most packets only require a couple of ring elements. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2011, 01:27:12 UTC
926d097 stephen hemminger 16 November 2011, 13:42:57 UTC sky2: rename up/down functions The code is clearer if the up/down functions are renamed to open/close like other drivers. Purely syntax change. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2011, 01:27:11 UTC
f9687c4 stephen hemminger 16 November 2011, 13:42:56 UTC sky2: pci posting issues A couple of the reset and setup paths have possible PCI posting issues. When setting registers, a read is necessary to force the writes to complete. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2011, 01:27:09 UTC
1401a80 stephen hemminger 16 November 2011, 13:42:55 UTC sky2: fix hang on shutdown (and other irq issues) There are several problems with recent change to how IRQ's are setup. * synchronize_irq in sky2_shutdown would hang because there was no IRQ setup. * when device was set to down, some IRQ bits left enabled so a hardware error would produce IRQ with no handler * quick link on Optima chip set was enabled without handler * suspend/resume would leave IRQ on with no handler if device was down Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2011, 01:27:08 UTC
bbc13ab Florian Fainelli 16 November 2011, 06:00:08 UTC r6040: fix check against MCRO_HASHEN bit in r6040_multicast_list We are checking whether the MCR0_HASHEN bit is set using a logical and instead of bitwise and, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> 17 November 2011, 01:24:52 UTC
377a467 Stephen Hemminger 16 November 2011, 22:58:46 UTC MAINTAINERS: change email address for shemminger My old email account at linux-foundation is no longer usable after the LF breakin. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2011, 22:58:46 UTC
5e773fd Joe Perches 15 November 2011, 13:56:14 UTC pch_gbe: Move #include of module.h The first #include must be pch_gbe.h as it does a #define of pr_fmt. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2011, 22:38:03 UTC
eb2afd4 Dmitry Kravkov 15 November 2011, 12:07:33 UTC bnx2x: cache-in compressed fw image Re-request fw from fs may fail for different reasons, once the fw was loaded we won't release it until driver is removed. This also resolves the boot problem when initial fw is located on initrd, but rootfs is still unavailable, in this case device reset will fail due to absence of fw files. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2011, 22:37:15 UTC
eccab1e Jean-Christophe PLAGNIOL-VILLARD 15 November 2011, 09:36:30 UTC net/cadence: enable by default NET_ATMEL so the defconfig of the atmel continue to have the support of the network as before Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2011, 22:33:50 UTC
fa2da8c stephen hemminger 15 November 2011, 08:09:14 UTC bridge: correct IPv6 checksum after pull Bridge multicast snooping of ICMPv6 would incorrectly report a checksum problem when used with Ethernet devices like sky2 that use CHECKSUM_COMPLETE. When bytes are removed from skb, the computed checksum needs to be adjusted. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Martin Volf <martin.volf.42@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2011, 22:32:43 UTC
0284a0f Einar Lueck 15 November 2011, 02:31:16 UTC qeth: Reduce CPU consumption through less SIGA-r calls Patch avoids SIGA-r calls in case of SIGA-r required. It only calls SIGA-r if a threshold of free buffer is reached. CPU consumption is reduced as a consequence. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2011, 22:28:20 UTC
1d36cb4 Frank Blaschka 15 November 2011, 02:31:15 UTC qeth: l3 fix rcu splat in xmit when use dst_get_neighbour to get neighbour, we need rcu_read_lock to protect, since dst_get_neighbour uses rcu_dereference. Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2011, 22:28:14 UTC
1d50356 Ursula Braun 15 November 2011, 02:31:14 UTC netiucv: reinsert dev_alloc_name for device naming Invocation of dev_alloc_name() is re-inserted, because the created net_device name is used to create the device name for the iucv bus. This device is created before the register_netdev call. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2011, 22:28:10 UTC
7c01a8e Christian Borntraeger 15 November 2011, 02:31:13 UTC qeth: remove WARN_ON leftover The patch "qeth: exploit asynchronous delivery of storage blocks" added a WARN_ON in qeth_schedule_recovery. A device recovery should not cause a kernel warning. This is obviously a debugging left-over that we forgot to remove. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2011, 22:28:04 UTC
6cc31d0 Ursula Braun 15 November 2011, 02:31:12 UTC qeth: return with -EPERM if sniffing is not enabled Without appropriate configuration at the SE, a HiperSockets device cannot be used for sniffing. Setting the sniffer attribute is rejected with -EPERM. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2011, 22:27:59 UTC
709e869 Eric Dumazet 14 November 2011, 10:56:56 UTC tcp: clear xmit timers in tcp_v4_syn_recv_sock() Simon Kirby reported divides by zero errors in __tcp_select_window() This happens when inet_csk_route_child_sock() returns a NULL pointer : We free new socket while we eventually armed keepalive timer in tcp_create_openreq_child() Fix this by a call to tcp_clear_xmit_timers() [ This is a followup to commit 918eb39962dff (net: add missing bh_unlock_sock() calls) ] Reported-by: Simon Kirby <sim@hostway.ca> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Simon Kirby <sim@hostway.ca> Signed-off-by: David S. Miller <davem@davemloft.net> 16 November 2011, 21:57:45 UTC
46993f0 Grant Grundler 15 November 2011, 07:12:43 UTC net-next:asix: V2 Update VERSION Only update VERSION to reflect previous changes. Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2011, 21:26:07 UTC
b2d3ad2 Grant Grundler 15 November 2011, 07:12:42 UTC net-next:asix: V2 more fixes for ax88178 phy init sequence Now works on Samsung Series 5 (chromebook) Two fixes here: o use 0x7F mask for phymode o read phyid *AFTER* phy is powered up (via GPIOs) Signed-off-by: Allan Chou <allan@asix.com.tw> Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2011, 21:26:06 UTC
d366518 Grant Grundler 15 November 2011, 07:12:41 UTC net-next:asix: reduce AX88772 init time by about 2 seconds ax88772_reset takes about 2 seconds and is called twice. Once from ax88772_bind() directly and again indirectly from usbnet_open(). Reset the USB FW/Phy enough to blink the LEDs when inserted. Signed-off-by: Allan Chou <allan@asix.com.tw> Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2011, 21:26:06 UTC
a77929a Grant Grundler 15 November 2011, 07:12:40 UTC net-next:asix:poll in asix_get_phyid in case phy not ready Sometimes the phy isn't ready after reset...poll and pray it will be soon. Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2011, 21:26:06 UTC
3486140 Grant Grundler 15 November 2011, 07:12:39 UTC net-next:asix:PHY_MODE_RTL8211CL should be 0xC Use correct value for rtl phy support. (rtl phy are in AX88178 devices like NWU220G and USB2-ET1000). Signed-off-by: Allan Chou <allan@asix.com.tw> Tested-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2011, 21:26:05 UTC
fe09b32 Jesper Juhl 13 November 2011, 21:14:32 UTC Net, libertas: Resolve memory leak in if_spi_host_to_card() If we hit the default case in the switch in if_spi_host_to_card() we'll leak the memory we allocated for 'packet'. This patch resolves the leak by freeing the allocated memory in that case. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Dan Williams <dcbw@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com> 15 November 2011, 15:02:57 UTC
ed66ba4 Gertjan van Wingerde 12 November 2011, 18:10:44 UTC rt2x00: Fix sleep-while-atomic bug in powersaving code. The generic powersaving code that determines after reception of a frame whether the device should go back to sleep or whether is could stay awake was calling rt2x00lib_config directly from RX tasklet context. On a number of the devices this call can actually sleep, due to having to confirm that the sleeping commands have been executed successfully. Fix this by moving the call to rt2x00lib_config to a workqueue call. This fixes bug https://bugzilla.redhat.com/show_bug.cgi?id=731672 Tested-by: Tomas Trnka <tomastrnka@gmx.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: <stable@vger.kernel.org> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 15 November 2011, 15:02:56 UTC
c18b780 Gertjan van Wingerde 12 November 2011, 18:10:43 UTC rt2x00: Add USB device ID of Buffalo WLI-UC-GNHP. This is reported to be an RT3070 based device. Reported-by: Teika Kazura <teika@lavabit.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 15 November 2011, 15:02:56 UTC
eec2057 Jesper Juhl 14 November 2011, 14:08:05 UTC net/packet: Revert incorrect dead-code changes to prb_setup_retire_blk_timer Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net> 15 November 2011, 02:49:46 UTC
f8b8a80 David S. Miller 14 November 2011, 19:46:22 UTC Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 14 November 2011, 19:46:22 UTC
a32fd63 John Crispin 14 November 2011, 05:01:18 UTC NET: MIPS: lantiq: fix etop compile error The Lantiq ETOP ethernet driver fails to build in 3.2-rc1 due to 2 missing header files. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> 14 November 2011, 19:34:54 UTC
4a5f4dd Yevgeny Petrilin 14 November 2011, 19:25:36 UTC mlx4_en: Remove FCS bytes from packet length. When HW doesn't remove FCS bytes they are reported in the completion byte count, we don't need to take them to skb. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net> 14 November 2011, 19:25:36 UTC
06236ac Maciej Żenczykowski 07 November 2011, 14:23:11 UTC net-netlink: Add a new attribute to expose TCLASS values via netlink commit 3ceca749668a52bd795585e0f71c6f0b04814f7b added a TOS attribute. Unfortunately TOS and TCLASS are both present in a dual-stack v6 socket, furthermore they can have different values. As such one cannot in a sane way expose both through a single attribute. Signed-off-by: Maciej Żenczyowski <maze@google.com> CC: Murali Raja <muralira@google.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> 14 November 2011, 06:08:49 UTC
6d74eb9 Mark Kamichoff 09 November 2011, 11:48:10 UTC net/usb: Misc. fixes for the LG-VL600 LTE USB modem Add checking for valid magic values (needed for stability in the event corrupted packets are received) and remove some other unneeded checks. Also, fix flagging device as WWAN (Bugzilla bug #39952). Signed-off-by: Mark Kamichoff <prox@prolixium.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 November 2011, 05:49:05 UTC
3ac3546 Robert Marklund 25 October 2011, 22:05:43 UTC net/smsc911x: Always wait for the chip to be ready Wait for the chip to be ready before any access to it. On the Snowball platform we need to enable an external regulator before the chip comes online, and then it happens that the device is not yet ready at probe time, so let's wait for it. Signed-off-by: Robert Marklund <robert.marklund@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> 14 November 2011, 05:40:50 UTC
ef5e0d8 Andrey Vagin 10 November 2011, 05:48:03 UTC bridge: Fix potential deadlock on br->multicast_lock multicast_lock is taken in softirq context, so we should use spin_lock_bh() in userspace. call-chain in softirq context: run_timer_softirq() br_multicast_query_expired() call-chain in userspace: sysfs_write_file() store_multicast_snooping() br_multicast_toggle() Signed-off-by: Andrew Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net> 14 November 2011, 05:38:53 UTC
731abb9 Josh Boyer 10 November 2011, 15:10:23 UTC ip6_tunnel: copy parms.name after register_netdevice Commit 1c5cae815d removed an explicit call to dev_alloc_name in ip6_tnl_create because register_netdevice will now create a valid name. This works for the net_device itself. However the tunnel keeps a copy of the name in the parms structure for the ip6_tnl associated with the tunnel. parms.name is set by copying the net_device name in ip6_tnl_dev_init_gen. That function is called from ip6_tnl_dev_init in ip6_tnl_create, but it is done before register_netdevice is called so the name is set to a bogus value in the parms.name structure. This shows up if you do a simple tunnel add, followed by a tunnel show: [root@localhost ~]# ip -6 tunnel add remote fec0::100 local fec0::200 [root@localhost ~]# ip -6 tunnel show ip6tnl0: ipv6/ipv6 remote :: local :: encaplimit 0 hoplimit 0 tclass 0x00 flowlabel 0x00000 (flowinfo 0x00000000) ip6tnl%d: ipv6/ipv6 remote fec0::100 local fec0::200 encaplimit 4 hoplimit 64 tclass 0x00 flowlabel 0x00000 (flowinfo 0x00000000) [root@localhost ~]# Fix this by moving the strcpy out of ip6_tnl_dev_init_gen, and calling it after register_netdevice has successfully returned. Cc: stable@vger.kernel.org Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 November 2011, 05:24:06 UTC
898bdf2 david decotigny 11 November 2011, 16:27:34 UTC forcedeth: fix stats on hardware without extended stats support This change makes sure that tx_packets/rx_bytes ifconfig counters are updated even on NICs that don't provide hardware support for these stats: they are now updated in software. For the sake of consistency, we also now have tx_bytes updated in software (hardware counters include ethernet CRC, and software doesn't account for it). This reverts parts of: - "forcedeth: statistics optimization" (21828163b2) - "forcedeth: Improve stats counters" (0bdfea8ba8) - "forcedeth: remove unneeded stats updates" (4687f3f364) Tested: pktgen + loopback (http://patchwork.ozlabs.org/patch/124698/) reports identical tx_packets/rx_packets and tx_bytes/rx_bytes. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 14 November 2011, 05:14:39 UTC
77c1c7c Paul Bolle 13 November 2011, 03:36:37 UTC rds: drop "select LLIST" Commit 1bc144b625 ("net, rds, Replace xlist in net/rds/xlist.h with llist") added "select LLIST" to the RDS_RDMA Kconfig entry. But there is no Kconfig symbol named LLIST. The select statement for that symbol is a nop. Drop it. lib/llist.o is builtin, so all that's needed to use the llist functionality is to include linux/llist.h, which this commit also did. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net> 14 November 2011, 05:10:50 UTC
3ed90f7 Jesper Juhl 14 November 2011, 05:09:21 UTC net/packet: remove dead code and unneeded variable from prb_setup_retire_blk_timer() We test for 'tx_ring' being != zero and BUG() if that's the case. So after that check there is no way that 'tx_ring' could be anything _but_ zero, so testing it again is just dead code. Once that dead code is removed, the 'pkc' local variable becomes entirely redundant, so remove that as well. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David S. Miller <davem@davemloft.net> 14 November 2011, 05:09:21 UTC
4b90a60 Nick Bowler 10 November 2011, 09:01:27 UTC ah: Don't return NET_XMIT_DROP on input. When the ahash driver returns -EBUSY, AH4/6 input functions return NET_XMIT_DROP, presumably copied from the output code path. But returning transmit codes on input doesn't make a lot of sense. Since NET_XMIT_DROP is a positive int, this gets interpreted as the next header type (i.e., success). As that can only end badly, remove the check. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net> 12 November 2011, 23:13:32 UTC
fb14ca4 John W. Linville 11 November 2011, 16:34:47 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 11 November 2011, 16:34:47 UTC
fada105 Amitkumar Karwar 10 November 2011, 05:36:21 UTC mwifiex: fix association issue with AP configured in hidden SSID mode Firmware expects 'max_ssid_length' field in 'struct mwifiex_ie_types_wildcard_ssid_params' to be '0' for performing SSID specific scan. Currently driver updates it with an actual SSID length. Hence UUT is not able to find the AP configured in hidden SSID mode in scan results and association fails. max_ssid_length is filled with '0' to fix the issue. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 11 November 2011, 16:03:25 UTC
43e5885 Emmanuel Grumbach 10 November 2011, 00:50:50 UTC iwlwifi: avoid a panic when unloading the module with RF Kill When HW RF kill switch is set to kill the radio, our NIC issues an interrupt after we stop the APM module. When we unload the module, the driver disables and cleans the interrupts before stopping the APM. So we have a real interrupt (inta not zero) pending. When this interrupts pops up the tasklet has already been killed and we crash. Here is a logical description of the flow: disable and clean interrupts synchronize interrupts kill the tasklet stop the APM <<== creates an RF kill interrupt free_irq <<== somehow our ISR is called here and we crash Here is the panic message: [ 201.313636] BUG: unable to handle kernel paging request at ffff8800911b7150 [ 201.314541] IP: [<ffffffff8106d652>] tasklet_action+0x62/0x130 [ 201.315149] PGD 1c06063 PUD db37f067 PMD db408067 PTE 80000000911b7160 [ 201.316456] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 201.317324] CPU 1 [ 201.317495] Modules linked in: arc4 iwlwifi(-) mac80211 cfg80211 netconsole configfs binfmt_misc i915 drm_kms_helper drm uvcvideo i2c_algo_bit videodev dell_laptop dcdbas intel_agp dell_wmi intel_ips psmouse intel_gtt v4l2_compat_ioctl32 asix usbnet mii serio_raw video sparse_keymap firewire_ohci sdhci_pci sdhci firewire_core e1000e crc_itu_t [last unloaded: configfs] [ 201.323839] [ 201.324015] Pid: 2061, comm: modprobe Not tainted 3.1.0-rc9-wl #4 Dell Inc. Latitude E6410/0667CC [ 201.324736] RIP: 0010:[<ffffffff8106d652>] [<ffffffff8106d652>] tasklet_action+0x62/0x130 [ 201.325128] RSP: 0018:ffff88011bc43ea0 EFLAGS: 00010286 [ 201.325338] RAX: ffff88008ae70000 RBX: ffff8800911b7150 RCX: ffff88008ae70028 [ 201.325555] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88008ae70000 [ 201.325775] RBP: ffff88011bc43ec0 R08: 0000000000000000 R09: 0000000000000000 [ 201.325994] R10: 0000000000000002 R11: 0000000000000001 R12: 0000000000000001 [ 201.326212] R13: 0000000000000006 R14: 0000000000000100 R15: ffff88008e259fd8 [ 201.326431] FS: 00007f4b90ea9700(0000) GS:ffff88011bc40000(0000) knlGS:0000000000000000 [ 201.326657] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 201.326864] CR2: ffff8800911b7150 CR3: 000000008fd6d000 CR4: 00000000000006e0 [ 201.327083] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 201.327302] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 201.327521] Process modprobe (pid: 2061, threadinfo ffff88008e258000, task ffff88008ae70000) [ 201.327747] Stack: [ 201.330494] 0000000000000046 0000000000000030 0000000000000001 0000000000000006 [ 201.333870] ffff88011bc43f30 ffffffff8106cd8a ffffffff811e1016 ffff88011bc43f08 [ 201.337186] 0000000100000046 ffff88008e259fd8 0000000a10be2160 0000000000000006 [ 201.340458] Call Trace: [ 201.342994] <IRQ> [ 201.345656] [<ffffffff8106cd8a>] __do_softirq+0xca/0x250 [ 201.348185] [<ffffffff811e1016>] ? pde_put+0x76/0x90 [ 201.350730] [<ffffffff8131aeae>] ? do_raw_spin_unlock+0x5e/0xb0 [ 201.353261] [<ffffffff811e1016>] ? pde_put+0x76/0x90 [ 201.355776] [<ffffffff8163ccfc>] call_softirq+0x1c/0x30 [ 201.358287] [<ffffffff8101531d>] do_softirq+0x9d/0xd0 [ 201.360823] [<ffffffff8106cb05>] irq_exit+0xd5/0xf0 [ 201.363330] [<ffffffff8163d5d6>] do_IRQ+0x66/0xe0 [ 201.365819] [<ffffffff81632673>] common_interrupt+0x73/0x73 [ 201.368257] <EOI> Cc: <stable@kernel.org> 3.1+ Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 11 November 2011, 16:03:24 UTC
1e49570 David S. Miller 09 November 2011, 05:14:11 UTC net: Fix references to deleted NET_ETHERNET Kconfig setting. Change them over to plain "ETHERNET" Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 10 November 2011, 00:26:53 UTC
3b971a7 David S. Miller 09 November 2011, 21:22:15 UTC Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 09 November 2011, 21:22:15 UTC
b12f62e Li Wei 08 November 2011, 21:39:28 UTC ipv4: fix for ip_options_rcv_srr() daddr update. When opt->srr_is_hit is set skb_rtable(skb) has been updated for 'nexthop' and iph->daddr should always equals to skb_rtable->rt_dst holds, We need update iph->daddr either. Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2011, 20:59:00 UTC
b7ea81a Nick Bowler 08 November 2011, 12:12:45 UTC ah: Read nexthdr value before overwriting it in ahash input callback. The AH4/6 ahash input callbacks read out the nexthdr field from the AH header *after* they overwrite that header. This is obviously not going to end well. Fix it up. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2011, 20:55:53 UTC
069294e Nick Bowler 08 November 2011, 12:12:44 UTC ah: Correctly pass error codes in ahash output callback. The AH4/6 ahash output callbacks pass nexthdr to xfrm_output_resume instead of the error code. This appears to be a copy+paste error from the input case, where nexthdr is expected. This causes the driver to continuously add AH headers to the datagram until either an allocation fails and the packet is dropped or the ahash driver hits a synchronous fallback and the resulting monstrosity is transmitted. Correct this issue by simply passing the error code unadulterated. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2011, 20:55:53 UTC
fecc735 Paul Bolle 08 November 2011, 10:31:10 UTC net: drivers/net/hippi/Kconfig should be sourced Commit ff5a3b509e ("hippi: Move the HIPPI driver") moved the HIPPI driver into drivers/net/hippi. It didn't source drivers/net/hippi/Kconfig though, so it didn't make all necessary Kconfig changes. So let drivers/net/kconfig source HIPPI's Kconfig file. [ Fix syntax error at the end of HIPP's Kconfig file. -DaveM ] Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2011, 20:55:06 UTC
f79d7e6 Ricardo Ribalda 07 November 2011, 23:39:57 UTC net/ll_temac: FIX : Wait for indirect wait to end While tracing down a connectivity problem on the temac I connected a probe to the Cross bar irq, and it was triggered when doing ifdown->ifup. This is fixed once waiting for the indirect write to end. Since it is not on the hot path there is no performance loss. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2011, 20:39:57 UTC
50ec153 Ricardo Ribalda 07 November 2011, 23:31:58 UTC net/temac: FIX segfault when process old irqs Do not enable the irq until the scatter gather registers are ready to handle the data. Otherwise an irq from a packet send/received before last close can lead to an access to an invalid memory region on the irq handler. Also, stop the dma engine on close. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 09 November 2011, 20:37:38 UTC
0ecfe80 Johannes Berg 09 November 2011, 11:14:16 UTC mac80211: fix race between connection monitor & suspend When the connection monitor timer fires right before suspend, the following will happen: timer fires -> monitor_work gets queued suspend calls ieee80211_sta_quiesce ieee80211_sta_quiesce: - deletes timer - cancels monitor_work synchronously, running it [note wrong order of these steps] monitor_work runs, re-arming the timer later, timer fires while system should be quiesced This causes a warning: WARNING: at net/mac80211/util.c:540 ieee80211_can_queue_work+0x35/0x40 [mac80211]() but is otherwise harmless. I'm not completely sure this is the scenario Thomas stumbled across, but it is the only way I can right now see the warning in a scenario like the one he reported. Reported-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 09 November 2011, 19:35:56 UTC
d929bbc Steven Miao 09 November 2011, 08:30:40 UTC wireless: libertas: fix unaligned le64 accesses use get_unaligned_le64() to get timestamp Signed-off-by: Steven Miao <realmz6@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 09 November 2011, 19:35:55 UTC
58ebacc Luis R. Rodriguez 08 November 2011, 22:28:06 UTC cfg80211: fix bug on regulatory core exit on access to last_request Commit 4d9d88d1 by Scott James Remnant <keybuk@google.com> added the .uevent() callback for the regulatory device used during the platform device registration. The change was done to account for queuing up udev change requests through udevadm triggers. The change also meant that upon regulatory core exit we will now send a uevent() but the uevent() callback, reg_device_uevent(), also accessed last_request. Right before commiting device suicide we free'd last_request but never set it to NULL so platform_device_unregister() would lead to bogus kernel paging request. Fix this and also simply supress uevents right before we commit suicide as they are pointless. This fix is required for kernels >= v2.6.39 $ git describe --contains 4d9d88d1 v2.6.39-rc1~468^2~25^2^2~21 The impact of not having this present is that a bogus paging access may occur (only read) upon cfg80211 unload time. You may also get this BUG complaint below. Although Johannes could not reproduce the issue this fix is theoretically correct. mac80211_hwsim: unregister radios mac80211_hwsim: closing netlink BUG: unable to handle kernel paging request at ffff88001a06b5ab IP: [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211] PGD 1836063 PUD 183a063 PMD 1ffcb067 PTE 1a06b160 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Modules linked in: cfg80211(-) [last unloaded: mac80211] Pid: 2279, comm: rmmod Tainted: G W 3.1.0-wl+ #663 Bochs Bochs RIP: 0010:[<ffffffffa030df9a>] [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211] RSP: 0000:ffff88001c5f9d58 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88001d2eda88 RCX: ffff88001c7468fc RDX: ffff88001a06b5a0 RSI: ffff88001c7467b0 RDI: ffff88001c7467b0 RBP: ffff88001c5f9d58 R08: 000000000000ffff R09: 000000000000ffff R10: 0000000000000000 R11: 0000000000000001 R12: ffff88001c7467b0 R13: ffff88001d2eda78 R14: ffffffff8164a840 R15: 0000000000000001 FS: 00007f8a91d8a6e0(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88001a06b5ab CR3: 000000001c62e000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 2279, threadinfo ffff88001c5f8000, task ffff88000023c780) Stack: ffff88001c5f9d98 ffffffff812ff7e5 ffffffff8176ab3d ffff88001c7468c2 000000000000ffff ffff88001d2eda88 ffff88001c7467b0 ffff880000114820 ffff88001c5f9e38 ffffffff81241dc7 ffff88001c5f9db8 ffffffff81040189 Call Trace: [<ffffffff812ff7e5>] dev_uevent+0xc5/0x170 [<ffffffff81241dc7>] kobject_uevent_env+0x1f7/0x490 [<ffffffff81040189>] ? sub_preempt_count+0x29/0x60 [<ffffffff814cab1a>] ? _raw_spin_unlock_irqrestore+0x4a/0x90 [<ffffffff81305307>] ? devres_release_all+0x27/0x60 [<ffffffff8124206b>] kobject_uevent+0xb/0x10 [<ffffffff812fee27>] device_del+0x157/0x1b0 [<ffffffff8130377d>] platform_device_del+0x1d/0x90 [<ffffffff81303b76>] platform_device_unregister+0x16/0x30 [<ffffffffa030fffd>] regulatory_exit+0x5d/0x180 [cfg80211] [<ffffffffa032bec3>] cfg80211_exit+0x2b/0x45 [cfg80211] [<ffffffff8109a84c>] sys_delete_module+0x16c/0x220 [<ffffffff8108a23e>] ? trace_hardirqs_on_caller+0x7e/0x120 [<ffffffff814cba02>] system_call_fastpath+0x16/0x1b Code: <all your base are belong to me> RIP [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211] RSP <ffff88001c5f9d58> CR2: ffff88001a06b5ab ---[ end trace 147c5099a411e8c0 ]--- Reported-by: Johannes Berg <johannes@sipsolutions.net> Cc: Scott James Remnant <keybuk@google.com> Cc: stable@vger.kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 09 November 2011, 19:35:55 UTC
5b2bbf7 Johannes Berg 08 November 2011, 12:04:41 UTC mac80211: fix bug in ieee80211_build_probe_req ieee80211_probereq_get() can return NULL in which case we should clean up & return NULL in ieee80211_build_probe_req() as well. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 09 November 2011, 19:35:55 UTC
f8d1ccf Johannes Berg 08 November 2011, 11:28:33 UTC mac80211: fix NULL dereference in radiotap code When receiving failed PLCP frames is enabled, there won't be a rate pointer when we add the radiotap header and thus the kernel will crash. Fix this by not assuming the rate pointer is always valid. It's still always valid for frames that have good PLCP though, and that is checked & enforced. This was broken by my commit fc88518916793af8ad6a02e05ff254d95c36d875 Author: Johannes Berg <johannes.berg@intel.com> Date: Fri Jul 30 13:23:12 2010 +0200 mac80211: don't check rates on PLCP error frames where I removed the check in this case but didn't take into account that the rate info would be used. Reported-by: Xiaokang Qin <xiaokang.qin@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 09 November 2011, 19:35:55 UTC
e29ec62 John W. Linville 09 November 2011, 18:41:11 UTC Merge branch 'master' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 09 November 2011, 18:41:11 UTC
cc438fc Eyal Shapira 08 November 2011, 13:54:46 UTC wl12xx: fix wl12xx_scan_sched_scan_ssid_list() check that all given ssids are in filters A minor fix for the check that verifies that all given SSIDs (in req) exist in the filters (the match sets) Signed-off-by: Eyal Shapira <eyal@wizery.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 08 November 2011, 20:02:45 UTC
a59be08 Helmut Schaa 08 November 2011, 13:01:13 UTC ath: Fix NULL ptr dereference in ath_reg_apply_world_flags This happens with devices using a regulatory domain 0x68 that are only 5Ghz capable because ath_reg_apply_active_scan_flags assumes that we always have a 2,4Ghz band. CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 82cd838c, ra == 82cd8384 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 00000003 00000024 $ 4 : 00000003 000016c1 82f900ac 00000024 $ 8 : 00000000 82cda304 0058bad8 00000005 $12 : 005908f8 001e8481 00000003 1dcd6500 $16 : 00000002 00000000 82c700c0 82c700c0 $20 : 82d415e4 82c70d64 82c70200 82c715bc $24 : 00000000 11e1a300 $28 : 82ce2000 82ce3c70 82c715a8 82cd8384 Hi : 00000000 Lo : 0000001e epc : 82cd838c ath_reg_apply_world_flags+0x78/0x17c [ath] Not tainted ra : 82cd8384 ath_reg_apply_world_flags+0x70/0x17c [ath] Status: 1000d403 KERNEL EXL IE Cause : 80800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: ath9k(+) ath9k_common ath9k_hw ath mac80211 cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc leds_gpio button_hotplug gpio_buttons input_polldev ie Process insmod (pid: 464, threadinfo=82ce2000, task=838b31d8, tls=00000000) Stack : 00000000 00000002 82f900ac 82c700c0 82d415e4 82c70d64 00000000 00000068 82f900ac 82cd88f4 82c700c0 82cda304 00000001 000020f0 82f90000 82c70d40 00000002 82f90000 82f900ac 82d4207c 82d518a0 00000002 7fee6118 8017c0d8 00000008 8397ba00 82c70d40 00000000 82c70200 83813000 83813058 b0010000 82d518a0 00000002 7fee6118 82d4b8c8 83445cc0 80120dc0 83804000 800eeda0 ... Call Trace: [<82cd838c>] ath_reg_apply_world_flags+0x78/0x17c [ath] [<82cd88f4>] ath_regd_init+0x464/0x488 [ath] [<82d4207c>] ath9k_init_device+0x6a4/0x6b4 [ath9k] [<82d4b8c8>] ath_pci_probe+0x27c/0x358 [ath9k] [<80181de0>] pci_device_probe+0x64/0xa4 [<8019e874>] driver_probe_device+0xb8/0x190 [<8019e9b8>] __driver_attach+0x6c/0xa4 [<8019dfc0>] bus_for_each_dev+0x60/0xb0 [<8019d744>] bus_add_driver+0xc4/0x25c [<8019ed6c>] driver_register+0xe0/0x198 [<8018206c>] __pci_register_driver+0x50/0xe0 [<82dd0010>] ath9k_init+0x10/0x54 [ath9k] [<8006b4a0>] do_one_initcall+0x68/0x1ec [<800a901c>] sys_init_module+0xec/0x23c [<80062544>] stack_done+0x20/0x3c Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 08 November 2011, 20:02:45 UTC
c26887d Johannes Berg 08 November 2011, 08:20:07 UTC cfg80211: fix missing kernel-doc Two new struct members were not documented, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> 08 November 2011, 20:02:44 UTC
9270fd6 John W. Linville 08 November 2011, 19:59:14 UTC Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth 08 November 2011, 19:59:14 UTC
2bc8ca4 Steffen Klassert 11 October 2011, 01:12:02 UTC ipv4: Fix inetpeer expire time information As we update the learned pmtu informations on demand, we might report a nagative expiration time value to userspace if the pmtu informations are already expired and we have not send a packet to that inetpeer after expiration. With this patch we send a expire time of null to userspace after expiration until the next packet is send to that inetpeer. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2011, 19:40:40 UTC
20db93c Eric Dumazet 08 November 2011, 19:21:44 UTC net: min_pmtu default is 552 Small fix in Documentation, since min_pmtu is 512 + 20 + 20 = 552 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2011, 19:21:44 UTC
6d67e9b Feng King 05 November 2011, 04:23:23 UTC tcp: Fix comments for Nagle algorithm TCP_NODELAY is weaker than TCP_CORK, when TCP_CORK was set, small segments will always pass Nagle test regardless of TCP_NODELAY option. Signed-off-by: Feng King <kinwin2008@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2011, 19:02:47 UTC
59caa56 oftedal 07 November 2011, 11:47:53 UTC sunhme: Allow usage on SBI based SBus systems To prevent the SBus driver for Sun Happy Meal cards from being loaded for PCI cards utilizing the same chipset, a filter was added to the probe function in commit 0b492fce3d72d982a7981905f85484a1e1ba7fde. The filter was implemented by checking the name of the parent node in the OF tree. This patch extends this filter, so that the driver will load on SBus systems that are based upon SBI SBus Bridges. Signed-off-by: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2011, 19:01:42 UTC
e50e705 Eric Dumazet 08 November 2011, 18:59:44 UTC l2tp: fix l2tp_udp_recv_core() pskb_may_pull() can change skb->data, so we have to load ptr/optr at the right place. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2011, 18:59:44 UTC
ea1649d Nico Erfurth 08 November 2011, 07:30:40 UTC Fix incorrect usage of NET_IP_ALIGN The driver used NET_IP_ALIGN to remove some additional padding inside of the rx_fixup function. On many architectures NET_IP_ALIGN defaults to 2 which removed the correct amount of bytes. On MCORE2-machines commit ea812ca1b06113597adcd8e70c0f84a413d97544 introduces a change which sets NET_IP_ALIGN to 0 by default. Which triggered the bug on these machines. This fix introduces a new RXW_PADDING define and uses this instead of NET_IP_ALIGN. The name was taken from the original SMSC7500 driver which is provided by SMSC. Signed-off-by: Nico Erfurth <ne@erfurth.eu> Tested-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2011, 17:37:07 UTC
c457338 Brian Haley 08 November 2011, 04:41:42 UTC ipv6: drop packets when source address is multicast RFC 4291 Section 2.7 says Multicast addresses must not be used as source addresses in IPv6 packets - drop them on input so we don't process the packet further. Signed-off-by: Brian Haley <brian.haley@hp.com> Reported-and-Tested-by: Kumar Sanghvi <divinekumar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2011, 17:37:06 UTC
10953db hayeswang 07 November 2011, 20:44:37 UTC r8169: increase the delay parameter of pm_schedule_suspend The link down would occur when reseting PHY. And it would take about 2 ~ 5 seconds from link down to link up. If the delay of pm_schedule_suspend is not long enough, the device would enter runtime_suspend before link up. After link up, the device would wake up and reset PHY again. Then, you would find the driver keep in a loop of runtime_suspend and rumtime_resume. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net> 08 November 2011, 17:37:06 UTC
d13431c Wen-chien Jesse Sung 08 November 2011, 06:30:22 UTC Bluetooth: Add support for Broadcom BCM20702A0 Since this device declares itself as vendor specific, must add a new entry to device ID table to support it. usb-device output of this device: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8197 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=D0DF9AA9C9F1 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> 08 November 2011, 15:15:43 UTC
1ea6b8f Linus Torvalds 08 November 2011, 00:16:02 UTC Linux 3.2-rc1 .. with new name. Because nothing says "really solid kernel release" like naming it after an extinct animal that just happened to be in the news lately. 08 November 2011, 00:16:02 UTC
075cb10 Linus Torvalds 08 November 2011, 00:14:26 UTC Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits) ARM: OMAP: Fix export.h or module.h includes ARM: OMAP: omap_device: Include linux/export.h ARM: OMAP2: Fix H4 matrix keyboard warning ARM: OMAP1: Remove unused omap-alsa.h ARM: OMAP1: Fix warnings about enabling 32 KiHz timer ARM: OMAP2+: timer: Remove omap_device_pm_latency ARM: OMAP2+: clock data: Remove redundant timer clkdev ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio ARM: OMAP: usb: musb: OMAP: Delete unused function MAINTAINERS: Update linux-omap git repository ARM: OMAP: change get_context_loss_count ret value to int ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success ARM: OMAP: dmtimer: Include linux/module.h ARM: OMAP2+: l3-noc: Include linux/module.h ARM: OMAP2+: devices: Fixes for McPDM ARM: OMAP: Fix errors and warnings when building for one board ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only ... 08 November 2011, 00:14:26 UTC
a3fbbde Al Viro 07 November 2011, 21:21:26 UTC VFS: we need to set LOOKUP_JUMPED on mountpoint crossing Mountpoint crossing is similar to following procfs symlinks - we do not get ->d_revalidate() called for dentry we have arrived at, with unpleasant consequences for NFS4. Simple way to reproduce the problem in mainline: cat >/tmp/a.c <<'EOF' #include <unistd.h> #include <fcntl.h> #include <stdio.h> main() { struct flock fl = {.l_type = F_RDLCK, .l_whence = SEEK_SET, .l_len = 1}; if (fcntl(0, F_SETLK, &fl)) perror("setlk"); } EOF cc /tmp/a.c -o /tmp/test then on nfs4: mount --bind file1 file2 /tmp/test < file1 # ok /tmp/test < file2 # spews "setlk: No locks available"... What happens is the missing call of ->d_revalidate() after mountpoint crossing and that's where NFS4 would issue OPEN request to server. The fix is simple - treat mountpoint crossing the same way we deal with following procfs-style symlinks. I.e. set LOOKUP_JUMPED... Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 November 2011, 22:58:06 UTC
54a0f91 Linus Torvalds 07 November 2011, 20:38:11 UTC Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf top: Fix live annotation in the --stdio interface perf top tui: Don't recalc column widths considering just the first page perf report: Add progress bar when processing time ordered events perf hists browser: Warn about lost events perf tools: Fix a typo of command name as trace-cmd perf hists: Fix recalculation of total_period when sorting entries perf header: Fix build on old systems perf ui browser: Handle K_RESIZE in dialog windows perf ui browser: No need to switch char sets that often perf hists browser: Use K_TIMER perf ui: Rename ui__warning_paranoid to ui__error_paranoid perf ui: Reimplement the popup windows using libslang perf ui: Reimplement ui__popup_menu using ui__browser perf ui: Reimplement ui_helpline using libslang perf ui: Improve handling sigwinch a bit perf ui progress: Reimplement using slang perf evlist: Fix grouping of multiple events 07 November 2011, 20:38:11 UTC
d30cc16 Tony Lindgren 07 November 2011, 20:27:23 UTC Merge branch 'fixes-modulesplit' into fixes 07 November 2011, 20:27:23 UTC
a1bcc1d Tony Lindgren 07 November 2011, 20:27:10 UTC ARM: OMAP: Fix export.h or module.h includes Commit 32aaeffbd4a7457bf2f7448b33b5946ff2a960eb (Merge branch 'modsplit-Oct31_2011'...) caused some build errors. Fix these and make sure we always have export.h or module.h included for MODULE_ and EXPORT_SYMBOL users: $ grep -rl ^MODULE_ arch/arm/*omap*/*.c | xargs \ grep -L linux/module.h arch/arm/mach-omap2/dsp.c arch/arm/mach-omap2/mailbox.c arch/arm/mach-omap2/omap-iommu.c arch/arm/mach-omap2/smartreflex.c Also check we either have export.h or module.h included for the files exporting symbols: $ grep -rl EXPORT_SYMBOL arch/arm/*omap*/*.c | xargs \ grep -L linux/export.h | xargs grep -L linux/module.h Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> 07 November 2011, 20:27:10 UTC
5558141 Axel Lin 07 November 2011, 20:27:10 UTC ARM: OMAP: omap_device: Include linux/export.h Include linux/export.h to fix below build warning: CC arch/arm/plat-omap/omap_device.o arch/arm/plat-omap/omap_device.c:1055: warning: data definition has no type or storage class arch/arm/plat-omap/omap_device.c:1055: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/arm/plat-omap/omap_device.c:1055: warning: parameter names (without types) in function declaration Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 07 November 2011, 20:27:10 UTC
f3f668b Andrzej Kaczmarek 07 November 2011, 19:19:04 UTC Bluetooth: Use miliseconds for L2CAP channel timeouts Timers set by __set_chan_timer() should use miliseconds instead of jiffies. Commit 942ecc9c4643db5ce071562e0a23f99464d6b461 updated l2cap_set_timer() so it expects timeout to be specified in msecs instead of jiffies. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> 07 November 2011, 19:19:04 UTC
94956ee Linus Torvalds 07 November 2011, 18:55:33 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ... 07 November 2011, 18:55:33 UTC
50e6963 Al Viro 07 November 2011, 16:39:57 UTC vfs: d_invalidate() should leave mountpoints alone Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 November 2011, 18:54:10 UTC
4dff523 Arek Lichwa 26 October 2011, 09:23:22 UTC Bluetooth: Revert: Fix L2CAP connection establishment This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06. The commit introduces regression when two 2.1 devices attempt establish rfcomm channel. Such connection is refused since there's a security block issue on l2cap. It means the link is unencrypted. 2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24 0000: 14 00 40 00 06 00 02 00 0f 35 03 19 12 00 ff ff ..@......5....˙˙ 0010: 35 05 0a 00 00 ff ff 00 5....˙˙. 2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88 L2CAP(d): cid 0x0040 len 84 [psm 0] 0000: 07 00 02 00 4f 00 4c 35 4a 35 48 09 00 00 0a 00 ....O.L5J5H..... 0010: 01 00 00 09 00 01 35 03 19 12 00 09 00 05 35 03 ......5.......5. 0020: 19 10 02 09 00 09 35 08 35 06 19 12 00 09 01 02 ......5.5....... 0030: 09 02 00 09 01 02 09 02 01 09 00 0a 09 02 02 09 ................ 0040: 00 00 09 02 03 09 00 00 09 02 04 28 01 09 02 05 ...........(.... 0050: 09 00 02 00 .... 2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 1 2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532 2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Reply (0x01|0x000b) ncmd 1 status 0x00 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3 status 0x00 handle 1 2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 02 05 04 00 03 00 41 00 ..........A. 2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 2 2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0 Connection refused - security block 2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 06 06 04 00 40 00 40 00 ........@.@. 2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 1 reason 0x13 Reason: Remote User Terminated Connection 2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 1 reason 0x16 Reason: Connection Terminated by Local Host Signed-off-by: Arek Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> 07 November 2011, 18:46:05 UTC
e45a618 david decotigny 05 November 2011, 14:38:24 UTC forcedeth: fix a few sparse warnings (variable shadowing) This fixes the following sparse warnings: drivers/net/ethernet/nvidia/forcedeth.c:2113:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2155:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2227:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2271:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2986:20: warning: symbol 'addr' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2963:6: originally declared here Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2011, 18:31:25 UTC
0bdfea8 Mandeep Baines 05 November 2011, 14:38:23 UTC forcedeth: Improve stats counters Rx byte count was off; instead use the hardware's count. Tx packet count was counting pre-TSO packets; instead count on-the-wire packets. Report hardware dropped frame count as rx_fifo_errors. - The count of transmitted packets reported by the forcedeth driver reports pre-TSO (TCP Segmentation Offload) packet counts and not the count of the number of packets sent on the wire. This change fixes the forcedeth driver to report the correct count. Fixed the code by copying the count stored in the NIC H/W to the value reported by the driver. - Count rx_drop_frame errors as rx_fifo_errors: We see a lot of rx_drop_frame errors if we disable the rx bottom-halves for too long. Normally, rx_fifo_errors would be counted in this case. The rx_drop_frame error count is private to forcedeth and is not reported by ifconfig or sysfs. The rx_fifo_errors count is currently unused in the forcedeth driver. It is reported by ifconfig as overruns. This change reports rx_drop_frame errors as rx_fifo_errors. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2011, 18:31:24 UTC
4687f3f david decotigny 05 November 2011, 14:38:22 UTC forcedeth: remove unneeded stats updates Function ndo_get_stats() updates most of the stats from hardware registers, making the manual updates un-needed. This change removes these manual updates. Main exception is rx_missed_errors which needs manual update. Another exception is rx_packets, still updated manually in this commit to make sure this patch doesn't change behavior of driver. This will be addressed by a future patch. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2011, 18:31:24 UTC
2a4e7a0 Mike Ditto 05 November 2011, 14:38:21 UTC forcedeth: Acknowledge only interrupts that are being processed This is to avoid a race, accidentally acknowledging an interrupt that we didn't notice and won't immediately process. This is based solely on code inspection; it is not known if there was an actual bug here. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2011, 18:31:24 UTC
f9c4082 david decotigny 05 November 2011, 14:38:20 UTC forcedeth: fix race when unloading module When forcedeth module is unloaded, there exists a path that can lead to mod_timer() after del_timer_sync(), causing an oops. This patch short-circuits this unneeded path, which originates in nv_get_ethtool_stats(). Tested: x86_64 16-way + 3 ethtool -S infinite loops + 100Mbps incoming traffic + rmmod/modprobe/ifconfig in a loop Initial-Author: Salman Qazi <sqazi@google.com> Discussion: http://patchwork.ozlabs.org/patch/123548/ Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 07 November 2011, 18:31:24 UTC
a844506 Stephen Rothwell 01 November 2011, 09:27:43 UTC device-mapper: using EXPORT_SYBOL in dm-space-map-checker.c needs export.h Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 November 2011, 18:29:10 UTC
6f66263 Stephen Rothwell 01 November 2011, 07:30:49 UTC device-mapper: dm-bufio.c needs to include module.h since it uses the module facilities. Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 November 2011, 18:29:10 UTC
1944ce6 Paul Gortmaker 28 September 2011, 22:29:32 UTC drivers/md: change module.h -> export.h in persistent-data/dm-* For the files which are not themselves modular, we can change them to include only the smaller export.h since all they are doing is looking for EXPORT_SYMBOL. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 07 November 2011, 18:29:09 UTC
back to top